[U-Boot] Port to at91sam9g45-ekes

Hi U-boot members. I have ported u-boot to the AT91SAM9G45-EKES board. I have, however, run into a little problem. The internal boot-ROM in the SAM9G45 processor only accepts boot-loaders up to 60K and the loader I have is already 70K. I therefore need an chainloader in between. Is there a recommended approach for this, something like

1. Use some other smaller bootloader to boot u-boot. 2. Use a tiny version of u-boot to boot the real u-boot. 3. Use pieces u-boot, e.g. by replacing start_armboot

... or should I just use man fantasy? ;-)

Regards,

Morten Kristiansen

-- All opinions are not equal. Some are a very great deal more robust, sophisticated and well supported in logic and argument than others. --Douglas Adams