commit 1b15483deb3f ("misc: add Qualcomm GENI SE QUP device driver") introduced support for platform-specific oversampling values, necessary to configure the UART clocks on all platforms at runtime. However it relies in probing a parent device. Despite the DM_FLAG_PRE_RELOC flag, this is not done consistently during boot.
Instead, take another approach by relying on ofnode_ helpers to read the serial engine base address and do the read directly. This fixes early UART on boards with a non-default oversampling rate.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- drivers/misc/Kconfig | 7 ------- drivers/misc/Makefile | 1 - drivers/misc/qcom-geni-se.c | 41 ---------------------------------------- drivers/serial/Kconfig | 2 -- drivers/serial/serial_msm_geni.c | 29 ++++++++++++++++++---------- 5 files changed, 19 insertions(+), 61 deletions(-)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 97057de8bf92..423cf22949aa 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -527,13 +527,6 @@ config WINBOND_W83627 legacy UART or other devices in the Winbond Super IO chips on X86 platforms.
-config QCOM_GENI_SE - bool "Qualcomm GENI Serial Engine Driver" - depends on ARCH_SNAPDRAGON - help - The driver manages Generic Interface (GENI) firmware based - Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. - config QFW bool help diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index b67b82358a6c..2d08181251c7 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -60,7 +60,6 @@ obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o obj-$(CONFIG_P2SB) += p2sb-uclass.o obj-$(CONFIG_PCA9551_LED) += pca9551_led.o obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o -obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o ifdef CONFIG_QFW obj-y += qfw.o obj-$(CONFIG_QFW_PIO) += qfw_pio.o diff --git a/drivers/misc/qcom-geni-se.c b/drivers/misc/qcom-geni-se.c deleted file mode 100644 index 281a5ec819a9..000000000000 --- a/drivers/misc/qcom-geni-se.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Qualcomm Generic Interface (GENI) Serial Engine (SE) Wrapper - * - * Copyright (C) 2023 Linaro Ltd. vladimir.zapolskiy@linaro.org - */ - -#include <common.h> -#include <dm.h> -#include <misc.h> -#include <asm/io.h> - -static int geni_se_qup_read(struct udevice *dev, int offset, - void *buf, int size) -{ - fdt_addr_t base = dev_read_addr(dev); - - if (size != sizeof(u32)) - return -EINVAL; - - *(u32 *)buf = readl(base + offset); - - return size; -} - -static struct misc_ops geni_se_qup_ops = { - .read = geni_se_qup_read, -}; - -static const struct udevice_id geni_se_qup_ids[] = { - { .compatible = "qcom,geni-se-qup" }, - {} -}; - -U_BOOT_DRIVER(geni_se_qup) = { - .name = "geni_se_qup", - .id = UCLASS_MISC, - .of_match = geni_se_qup_ids, - .ops = &geni_se_qup_ops, - .flags = DM_FLAG_PRE_RELOC, -}; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 9f0f84c9b426..81fdac047824 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -957,8 +957,6 @@ config MSM_SERIAL
config MSM_GENI_SERIAL bool "Qualcomm on-chip GENI UART" - select MISC - imply QCOM_GENI_SE help Support UART based on Generic Interface (GENI) Serial Engine (SE), used on Qualcomm Snapdragon SoCs. Should support all qualcomm SOCs diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c index 78fd9389c036..3e2e15b6cefe 100644 --- a/drivers/serial/serial_msm_geni.c +++ b/drivers/serial/serial_msm_geni.c @@ -486,12 +486,12 @@ static const struct dm_serial_ops msm_serial_ops = { .setbrg = msm_serial_setbrg, };
-static void geni_set_oversampling(struct udevice *dev) +static int geni_set_oversampling(struct udevice *dev) { struct msm_serial_data *priv = dev_get_priv(dev); - struct udevice *parent_dev = dev_get_parent(dev); + ofnode parent_node = ofnode_get_parent(dev_ofnode(dev)); u32 geni_se_version; - int ret; + fdt_addr_t addr;
priv->oversampling = UART_OVERSAMPLING;
@@ -499,16 +499,22 @@ static void geni_set_oversampling(struct udevice *dev) * It could happen that GENI SE IP is missing in the board's device * tree or GENI UART node is a direct child of SoC device tree node. */ - if (device_get_uclass_id(parent_dev) != UCLASS_MISC) - return; + if (!ofnode_device_is_compatible(parent_node, "qcom,geni-se-qup")) { + pr_err("%s: UART node must be a child of geniqup node\n", + __func__); + return -ENODEV; + }
- ret = misc_read(parent_dev, QUP_HW_VER_REG, - &geni_se_version, sizeof(geni_se_version)); - if (ret != sizeof(geni_se_version)) - return; + /* Read the HW_VER register relative to the parents address space */ + addr = ofnode_get_addr(parent_node); + geni_se_version = readl(addr + QUP_HW_VER_REG); + + printf("geni_se_version: %x\n", geni_se_version);
if (geni_se_version >= QUP_SE_VERSION_2_5) priv->oversampling /= 2; + + return 0; }
static inline void geni_serial_init(struct udevice *dev) @@ -553,8 +559,11 @@ static inline void geni_serial_init(struct udevice *dev) static int msm_serial_probe(struct udevice *dev) { struct msm_serial_data *priv = dev_get_priv(dev); + int ret;
- geni_set_oversampling(dev); + ret = geni_set_oversampling(dev); + if (ret < 0) + return ret;
/* No need to reinitialize the UART after relocation */ if (gd->flags & GD_FLG_RELOC)