From: Konrad Dybcio konrad.dybcio@linaro.org
The name "se" is used in upstream Linux device trees and has been for ages, long before this U-Boot-ism was introduced. Same goes for the existing compatible. Get rid of that.
[vzapolskiy: removed a ready change in the driver] Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org --- arch/arm/dts/sdm845.dtsi | 4 ++-- doc/device-tree-bindings/serial/msm-geni-serial.txt | 2 +- drivers/serial/serial_msm_geni.c | 4 +++- 3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi index 607af277f8be..92bdc82177d6 100644 --- a/arch/arm/dts/sdm845.dtsi +++ b/arch/arm/dts/sdm845.dtsi @@ -52,10 +52,10 @@ };
debug_uart: serial@a84000 { - compatible = "qcom,msm-geni-uart"; + compatible = "qcom,geni-debug-uart"; reg = <0xa84000 0x4000>; reg-names = "se_phys"; - clock-names = "se-clk"; + clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart9>; diff --git a/doc/device-tree-bindings/serial/msm-geni-serial.txt b/doc/device-tree-bindings/serial/msm-geni-serial.txt index 9eadc2561b4b..eaa39c949b10 100644 --- a/doc/device-tree-bindings/serial/msm-geni-serial.txt +++ b/doc/device-tree-bindings/serial/msm-geni-serial.txt @@ -1,6 +1,6 @@ Qualcomm GENI UART
Required properties: -- compatible: must be "qcom,msm-geni-uart" +- compatible: must be "qcom,geni-debug-uart" - reg: start address and size of the registers - clock: interface clock (must accept baudrate as a frequency) diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c index 3a200f45a6ce..29fae810d6fe 100644 --- a/drivers/serial/serial_msm_geni.c +++ b/drivers/serial/serial_msm_geni.c @@ -547,7 +547,9 @@ static int msm_serial_ofdata_to_platdata(struct udevice *dev) }
static const struct udevice_id msm_serial_ids[] = { - {.compatible = "qcom,msm-geni-uart"}, {}}; + { .compatible = "qcom,geni-debug-uart" }, + { } +};
U_BOOT_DRIVER(serial_msm_geni) = { .name = "serial_msm_geni",