Dear Stefano Babic,
In message 4EF2F5DC.8010703@denx.de you wrote:
make uImage LOADADDR=0x70008000
Exactly, I do the same.
Before, you wrote you were using 0x80008000 ...
No, I don't: I wrote that I am using 0x80008000 for MX3. Fabio wrote the example for MX53, and the value is correct (0x70008000). And for MX51 we have another one (on the MX51 the RAM starts at address 0x90000000).
There is no a general load address for all IMX SOCs.
I'm aware of this. But this was what Fabio quoted from the Linux messages:
Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready multiple load addresses: 0x80008000 0x80008000 0x10008000
This does not list 0x70008000 as an option (instead it lists 0x80008000 twice?). So is this a bug in / deficiency of the Linux kernel?
Best regards,
Wolfgang Denk