Re: [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM

30 Jan 2019

Hi Peng,
...
...
-----Original Message-----
From: Lukasz Majewski [mailto:lukma@denx.de]
Sent: 2019年1月30日 6:58
To: Peng Fan peng.fan@nxp.com
Cc: sbabic@denx.de; Fabio Estevam fabio.estevam@nxp.com;
dl-uboot-imx uboot-imx@nxp.com; u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc
to mmc2 for i.MX8MM
Hi Peng,
...
Since the SD is usdhc2 and eMMC is usdhc3,
Is this true on all IMX8M boards? Or is it only on the development
kit you do have?
This is a hack for board, needs to be fixed in next version.
...
My point is that this shall be setup by DTS aliases or maybe by
Kconfig option.
Could you share more information?
For example:
/ {
    model = "K+P iMX6Q";
    compatible = "kp,imx6-kp", "fsl,imx6";
aliases {
    	mmc0 = &usdhc2;
    	mmc1 = &usdhc4;
    	usb1 = &usbh1;
    };
chosen {
    	stdout-path = &uart1;
    };
And the "aliases" set the order in which you get the devices (like
mmc0, mmc1 above).
...
Thanks,
Peng.
...
...
this cause mapping problem
for spl_boot_device. So far hard coded them to correct MMC index,
so that SD and eMMC boot can work.
Signed-off-by: Peng Fan peng.fan@nxp.com
arch/arm/mach-imx/spl.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
index ebd8ff9290..0048832be8 100644
--- a/arch/arm/mach-imx/spl.c
+++ b/arch/arm/mach-imx/spl.c
@@ -147,9 +147,18 @@ u32 spl_boot_device(void)
   case SD1_BOOT:
   case MMC1_BOOT:
   	return BOOT_DEVICE_MMC1;
+#if defined(CONFIG_IMX8MM)

case SD2_BOOT:
case MMC2_BOOT:
return BOOT_DEVICE_MMC1;


case SD3_BOOT:
case MMC3_BOOT:
return BOOT_DEVICE_MMC2;



+#else
   case SD2_BOOT:
   case MMC2_BOOT:
   	return BOOT_DEVICE_MMC2;
+#endif
 #endif
   case NAND_BOOT:
   	return BOOT_DEVICE_NAND;
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH,      Managing Director: Wolfgang
Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

    