From: Patrice Chotard patrice.chotard@st.com
Update the compatible string in order to use ehci-generic driver instead of a STi specific one
Reverse the order of resets, due to the fact that softreset must be deasserted first.
Signed-off-by: Patrice Chotard patrice.chotard@st.com ---
v5: _ update compatible and reset order to fit with ehci_generic driver
arch/arm/dts/stih410.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/stih410.dtsi b/arch/arm/dts/stih410.dtsi index f118a9e..9997396 100644 --- a/arch/arm/dts/stih410.dtsi +++ b/arch/arm/dts/stih410.dtsi @@ -98,15 +98,15 @@ };
ehci0: usb@9a03e00 { - compatible = "st,st-ehci-300x"; + compatible = "generic-ehci"; reg = <0x9a03e00 0x100>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; - resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, - <&softreset STIH407_USB2_PORT0_SOFTRESET>; + resets = <&softreset STIH407_USB2_PORT0_SOFTRESET>, + <&powerdown STIH407_USB2_PORT0_POWERDOWN>; reset-names = "power", "softreset"; phys = <&usb2_picophy1>; phy-names = "usb"; @@ -130,15 +130,15 @@ };
ehci1: usb@9a83e00 { - compatible = "st,st-ehci-300x"; + compatible = "generic-ehci"; reg = <0x9a83e00 0x100>; interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; - resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, - <&softreset STIH407_USB2_PORT1_SOFTRESET>; + resets = <&softreset STIH407_USB2_PORT1_SOFTRESET>, + <&powerdown STIH407_USB2_PORT1_POWERDOWN>; reset-names = "power", "softreset"; phys = <&usb2_picophy2>; phy-names = "usb";