Zoom1 was wrongly setup for LAN91C96. Fix it by enabling LAN9211.
Signed-off-by: Nishanth Menon nm@ti.com --- board/logicpd/zoom1/zoom1.c | 20 ++++++++++++++++++-- include/configs/omap3_zoom1.h | 10 +++++++++- 2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 56e512f..461a852 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -102,9 +102,25 @@ int board_mmc_init(bd_t *bis) int board_eth_init(bd_t *bis) { int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); + +#ifdef CONFIG_SMC911X +#define STR_ENV_ETHADDR "ethaddr" + + struct eth_device *dev; + uchar eth_addr[6]; + + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); + if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) { + dev = eth_get_dev_by_index(0); + if (dev) { + eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); + } else { + printf("zoom1: Couldn't get eth device\n"); + rc = -1; + } + } #endif + return rc; } #endif diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index c4178d8..4a4dfd9 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -115,7 +115,7 @@ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH @@ -265,4 +265,12 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
+#ifdef CONFIG_CMD_NET +/* Ethernet (LAN9211 from SMSC9118 family) */ +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE DEBUG_BASE + +#endif + #endif /* __CONFIG_H */