Hi Guys,
I am trying to run u-boot on skyeye emulator. When i load the u-boot.bin via skyeye. I can see the following output but then u-boot hangs at the prompt. The same doesn't appear when i use the ep7321 binary image.
Also irrespective what i do i always get the mesage Flash: 0 kB or ATMEL Flash : 0Kb
This is my first time with both skyeye and u-boot. Any pointers are most appreciated.
Best Regards, rohit
Please let me know if you need any more info.
[root@localhost at91rm]# skyeye SKYEYE: If you have ELF kernel file, please use -e option to indicate your ELF format kernel filename SKYEYE: If you only have kernel binary image, you should put the filename of kernel binary image in skyeye.conf file arch: arm cpu info: armv4, arm920t, 41009200, ff00fff0, 2 mach info: name at91rm92, mach_init addr 0x8069ca0 uart info: input device is /dev/stdin, fd is 4. uart info: output device is /dev/stdout, fd is 5. SKYEYE: use arm920t mmu ops Loaded RAM ./u-boot.bin
U-Boot 1.1.4 (Mar 29 2006 - 14:29:46)
U-Boot code: 21F00000 -> 21F16470 BSS: -> 21F32E04 RAM Configuration: Bank #0: 20000000 32 MB Flash: 0 kB *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial U-Boot>