Hi Rayagonda,
On Wed, 10 Jun 2020 at 04:42, Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com wrote:
U-boot programs the GIC LPI configuration tables and enables the LPI table.
Signed-off-by: Bharat Kumar Reddy Gooty bharat.gooty@broadcom.com Signed-off-by: Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com
board/broadcom/bcmns3/ns3.c | 12 ++++++++++++ include/configs/bcm_ns3.h | 6 ++++++ 2 files changed, 18 insertions(+)
diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c index 1221f26ddc..d4f374a7c6 100644 --- a/board/broadcom/bcmns3/ns3.c +++ b/board/broadcom/bcmns3/ns3.c @@ -6,9 +6,12 @@
#include <common.h> #include <asm/io.h> +#include <asm/gic.h> +#include <asm/gic-v3.h> #include <asm/system.h> #include <asm/armv8/mmu.h> #include <asm/arch-bcmns3/bl33_info.h> +#include <dt-bindings/memory/bcm-ns3-mc.h>
static struct mm_region ns3_mem_map[] = { { @@ -88,3 +91,12 @@ void reset_cpu(ulong level) psci_system_reset(); } }
+#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *fdt, bd_t *bd) +{
gic_lpi_tables_init(BCM_NS3_GIC_LPI_BASE, MAX_GIC_REDISTRIBUTORS);return 0;+} +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index 02a736456a..a17b9d51c0 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -37,4 +37,10 @@ #define CONFIG_SYS_MAXARGS 64 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0x63C00000 +#define GICR_BASE 0x63E00000
Please use device tree and a UCLASS_IRQ driver
+/* Number of GIC re-distributors */ +#define MAX_GIC_REDISTRIBUTORS 8
#endif /* __BCM_NS3_H */
2.17.1
Regards, Simon