__cache_line_loop function was copied from linux kernel code where per line instruction cache operations are used. In uboot we use only entire instruction cache operations, so we can drop support of per line instruction cache operations from __cache_line_loop function as __cache_line_loop is never called with OP_INV_IC parameter.
Signed-off-by: Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com --- arch/arc/lib/cache.c | 30 +++++++----------------------- 1 file changed, 7 insertions(+), 23 deletions(-)
diff --git a/arch/arc/lib/cache.c b/arch/arc/lib/cache.c index 26f0a1f..2252542 100644 --- a/arch/arc/lib/cache.c +++ b/arch/arc/lib/cache.c @@ -23,7 +23,6 @@
#define OP_INV 0x1 #define OP_FLUSH 0x2 -#define OP_INV_IC 0x3
/* Bit val in SLC_CONTROL */ #define SLC_CTRL_DIS 0x001 @@ -373,30 +372,15 @@ void dcache_disable(void) }
#ifndef CONFIG_SYS_DCACHE_OFF -/* - * Common Helper for Line Operations on {I,D}-Cache - */ -static inline void __cache_line_loop(unsigned long paddr, unsigned long sz, - const int cacheop) +/* Common Helper for Line Operations on D-cache */ +static inline void __dcache_line_loop(unsigned long paddr, unsigned long sz, + const int cacheop) { unsigned int aux_cmd; -#if (CONFIG_ARC_MMU_VER == 3) - unsigned int aux_tag; -#endif int num_lines;
- if (cacheop == OP_INV_IC) { - aux_cmd = ARC_AUX_IC_IVIL; -#if (CONFIG_ARC_MMU_VER == 3) - aux_tag = ARC_AUX_IC_PTAG; -#endif - } else { - /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ - aux_cmd = cacheop & OP_INV ? ARC_AUX_DC_IVDL : ARC_AUX_DC_FLDL; -#if (CONFIG_ARC_MMU_VER == 3) - aux_tag = ARC_AUX_DC_PTAG; -#endif - } + /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ + aux_cmd = cacheop & OP_INV ? ARC_AUX_DC_IVDL : ARC_AUX_DC_FLDL;
sz += paddr & ~CACHE_LINE_MASK; paddr &= CACHE_LINE_MASK; @@ -405,7 +389,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long sz,
while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER == 3) - write_aux_reg(aux_tag, paddr); + write_aux_reg(ARC_AUX_DC_PTAG, paddr); #endif write_aux_reg(aux_cmd, paddr); paddr += l1_line_sz; @@ -458,7 +442,7 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long sz, { unsigned int ctrl_reg = __before_dc_op(cacheop);
- __cache_line_loop(paddr, sz, cacheop); + __dcache_line_loop(paddr, sz, cacheop); __after_dc_op(cacheop, ctrl_reg); } #else