This image combines the SPL with the i.MX header and U-Boot. This is a convenient way of having a single image to program on some boot devices.
The i.MX header has to be added to the SPL before appending U-Boot, so that the boot ROM loads only the SPL.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v11: None Changes in v10: None Changes in v9: None Changes in v8: - Use CONFIG_SPL_PAD_TO instead of CONFIG_SPL_MAX_SIZE for padding, which allows to pad the SPL after adding the i.MX header, which may save time when the boot ROM loads the SPL. - Add /u-boot-with-spl.imx to .gitignore.
Changes in v7: - New patch.
Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None
.gitignore | 1 + Makefile | 5 +++++ arch/arm/imx-common/Makefile | 6 ++++++ 3 files changed, 12 insertions(+)
diff --git a/.gitignore b/.gitignore index bff721e..e42d837 100644 --- a/.gitignore +++ b/.gitignore @@ -30,6 +30,7 @@ /u-boot /u-boot.hex /u-boot.imx +/u-boot-with-spl.imx /u-boot.map /u-boot.srec /u-boot.ldr diff --git a/Makefile b/Makefile index caca851..e22faa5 100644 --- a/Makefile +++ b/Makefile @@ -486,6 +486,10 @@ $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ rm $(obj)spl/u-boot-spl-pad.bin
+$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin + $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \ + $(OBJTREE)/u-boot-with-spl.imx + $(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \ -e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl @@ -850,6 +854,7 @@ clobber: tidy @rm -f $(obj)u-boot.kwb @rm -f $(obj)u-boot.pbl @rm -f $(obj)u-boot.imx + @rm -f $(obj)u-boot-with-spl.imx @rm -f $(obj)u-boot.ubl @rm -f $(obj)u-boot.ais @rm -f $(obj)u-boot.dtb diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index 428a57e..f59ae6f 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -55,6 +55,12 @@ $(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONF $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ -e $(CONFIG_SPL_TEXT_BASE) -d $< $@
+$(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ + -I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx + cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.bin > $@ + rm $(OBJTREE)/spl/u-boot-spl-pad.imx +
#########################################################################