This converts 3 usages of this option to the non-SPL form, since there is no SPL_OF_BOARD defined in Kconfig
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/pinctrl/broadcom/pinctrl-bcm283x.c | 2 +- drivers/serial/serial_bcm283x_mu.c | 2 +- drivers/serial/serial_bcm283x_pl011.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c index 44a310f83de..e949cb70900 100644 --- a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c +++ b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c @@ -153,7 +153,7 @@ U_BOOT_DRIVER(pinctrl_bcm283x) = { .priv_auto = sizeof(struct bcm283x_pinctrl_priv), .ops = &bcm283x_pinctrl_ops, .probe = bcm283x_pinctl_probe, -#if CONFIG_IS_ENABLED(OF_BOARD) +#if IS_ENABLED(CONFIG_OF_BOARD) .flags = DM_FLAG_PRE_RELOC, #endif }; diff --git a/drivers/serial/serial_bcm283x_mu.c b/drivers/serial/serial_bcm283x_mu.c index 12cbcb9858c..7585f790d22 100644 --- a/drivers/serial/serial_bcm283x_mu.c +++ b/drivers/serial/serial_bcm283x_mu.c @@ -197,7 +197,7 @@ U_BOOT_DRIVER(serial_bcm283x_mu) = { .plat_auto = sizeof(struct bcm283x_mu_serial_plat), .probe = bcm283x_mu_serial_probe, .ops = &bcm283x_mu_serial_ops, -#if !CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_BOARD) +#if !CONFIG_IS_ENABLED(OF_CONTROL) || IS_ENABLED(CONFIG_OF_BOARD) .flags = DM_FLAG_PRE_RELOC, #endif .priv_auto = sizeof(struct bcm283x_mu_priv), diff --git a/drivers/serial/serial_bcm283x_pl011.c b/drivers/serial/serial_bcm283x_pl011.c index 7d172cdac0a..09a9868a38f 100644 --- a/drivers/serial/serial_bcm283x_pl011.c +++ b/drivers/serial/serial_bcm283x_pl011.c @@ -94,7 +94,7 @@ U_BOOT_DRIVER(bcm283x_pl011_uart) = { .probe = bcm283x_pl011_serial_probe, .plat_auto = sizeof(struct pl01x_serial_plat), .ops = &bcm283x_pl011_serial_ops, -#if !CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_BOARD) +#if !CONFIG_IS_ENABLED(OF_CONTROL) || IS_ENABLED(CONFIG_OF_BOARD) .flags = DM_FLAG_PRE_RELOC, #endif .priv_auto = sizeof(struct pl01x_priv),