Certain modules are not affected by means of a warm reset and need not be configured again. Adding an API to detect the reset reason warm/cold.
This will be used to skip the module configurations that are retained across a warm reset.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: R Sricharan r.sricharan@ti.com --- arch/arm/cpu/armv7/omap-common/reset.c | 5 +++++ arch/arm/include/asm/arch-am33xx/cpu.h | 2 ++ arch/arm/include/asm/arch-omap3/cpu.h | 2 ++ arch/arm/include/asm/arch-omap3/sys_proto.h | 1 + arch/arm/include/asm/arch-omap4/cpu.h | 2 ++ arch/arm/include/asm/arch-omap4/sys_proto.h | 1 + arch/arm/include/asm/arch-omap5/cpu.h | 2 ++ arch/arm/include/asm/arch-omap5/sys_proto.h | 1 + 8 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/cpu/armv7/omap-common/reset.c index 234e90a..587bb47 100644 --- a/arch/arm/cpu/armv7/omap-common/reset.c +++ b/arch/arm/cpu/armv7/omap-common/reset.c @@ -34,3 +34,8 @@ void __weak reset_cpu(unsigned long ignored) { writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL); } + +u32 __weak warm_reset(void) +{ + return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK); +} diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 5a6534e..a027e31 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -53,8 +53,10 @@ /* Reset control */ #ifdef CONFIG_AM33XX #define PRM_RSTCTRL 0x44E00F00 +#define PRM_RSTST 0x44E00F08 #endif #define PRM_RSTCTRL_RESET 0x01 +#define PRM_RSTST_WARM_RESET_MASK 0x232
#ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 457f99d..5683e16 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -479,6 +479,8 @@ struct prm {
#define PRM_RSTCTRL 0x48307250 #define PRM_RSTCTRL_RESET 0x04 +#define PRM_RSTST 0x48307258 +#define PRM_RSTST_WARM_RESET_MASK 0x7D2 #define SYSCLKDIV_1 (0x1 << 6) #define SYSCLKDIV_2 (0x1 << 7)
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 2a89e56..9e52b12 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -74,4 +74,5 @@ void power_init_r(void); void dieid_num_r(void); void do_omap3_emu_romcode_call(u32 service_id, u32 parameters); void omap3_gp_romcode_call(u32 service_id, u32 parameter); +u32 warm_reset(void); #endif diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h index feddb7d..a8c4c60 100644 --- a/arch/arm/include/asm/arch-omap4/cpu.h +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -178,5 +178,7 @@ struct watchdog {
#define PRM_RSTCTRL PRM_DEVICE_BASE #define PRM_RSTCTRL_RESET 0x01 +#define PRM_RSTST (PRM_DEVICE_BASE + 0x4) +#define PRM_RSTST_WARM_RESET_MASK 0x07EA
#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index c6e3ad2..4f0a29d 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -57,6 +57,7 @@ void init_omap_revision(void); void do_io_settings(void); void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); +u32 warm_reset(void); /* * This is used to verify if the configuration header * was executed by Romcode prior to control of transfer diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index 8ef17c9..5e62013 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -182,5 +182,7 @@ struct watchdog {
#define PRM_RSTCTRL PRM_DEVICE_BASE #define PRM_RSTCTRL_RESET 0x01 +#define PRM_RSTST (PRM_DEVICE_BASE + 0x4) +#define PRM_RSTST_WARM_RESET_MASK 0x7FEA
#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 8396a22..b3bbdb7 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -57,6 +57,7 @@ void init_omap_revision(void); void do_io_settings(void); void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); +u32 warm_reset(void);
/* * This is used to verify if the configuration header