Hi Eddie,
On 28 April 2017 at 18:41, Eddie Cai eddie.cai.linux@gmail.com wrote:
add a simple readme to introduce rockusb and tell people how to use it
Signed-off-by: Eddie Cai eddie.cai.linux@gmail.com
Changes in v3:
-fix checkpatch error
doc/README.rockusb | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 doc/README.rockusb
diff --git a/doc/README.rockusb b/doc/README.rockusb new file mode 100644 index 0000000..262596e --- /dev/null +++ b/doc/README.rockusb @@ -0,0 +1,37 @@ +Rockusb (Rockchip USB protocol) +=====================================================
+Overview +--------
+Rockusb protocol is widely used with Rockchip devices. +It can read/write info, image to/from devices. This +document briefly describes how to use Rockusb for upgrading +firmware (e.g. kernel, u-boot, rootfs, etc.).
+Tools +-------- +There are many tools can support Rockusb protocol. rkdeveloptool +(https://github.com/rockchip-linux/rkdeveloptool) is open source, +It is maintained by Rockchip. People don't want to build from source +can download from here +(https://github.com/rockchip-linux/rkbin/blob/master/tools/rkdeveloptool)
+Usage +-------- +The Usage of Rockusb command is
is:
blank line here
+rockusb <USB_controller> <devtype> <dev[:part]>
blank line
+e.g. rockusb 0 mmc 0
blanke line
+On your U-Boot console, type this command to enter rockusb mode. +On your host PC. use lsusb command. you should see a usb device +using 0x2207 as its USB verdor id. Then use rkdeveloptool
blank line
+sudo rkdeveloptool wl <BeginSec> <File>
What are the parameters for? What do they mean?
blank line
+to flash U-Boot image use command
blank line
+sudo rkdeveloptool wl 64 <U-Boot binary>
blank line
Which U-Boot file? Please be specific
+There are plenty of Rockusb command. but wl(write lba) and +rd(reboot) command. These two command can let people flash +image to device.
+To do +-----
+* Fully support Rockusb protocol
1.9.1
Regards, Simon