Hello. I try to build the latest stable version of U-Boot for Arria5 (Arm32 bit) on Cygwin. I prefer teh Cygwin since in my company there is no Linux computers in the corporate network. The reason that I started to do it - the vendor provides u-boot for that chip, but it is from 2013, so it is the old version of everything (u-boot, toolchain, cygwin) and it is never updated by the vendor and therefore I need to do it by myself.
1. Could you recommend a specific toolchain (shall it be arm-eabi or arm-linux-gnueabi)? 2. I found that the makefile adds "-ansi" flag for cygwin, which leads to immediate failure. What was the reason for adding this flag? 3, I didn't find on the internet too much helpful information about that, so I'd be very grateful if anyone can share with me his knowledge.
Thanks in advance. Ilya