[PATCH] doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

This is how the patch was created:

find . -name '*.c' -exec \ sed -i 's/^(\s)*(\s*)@return(\s)/\1*\2Return:\3/' {} ;

find . -name '*.h' -exec \ sed -i 's/^(\s)*(\s*)@return(\s)/\1*\2Return:\3/' {} ;

In resulting diffs additionally replace: %s/Return: :/Return:/g

Remove symlink changes from patch.

The patch gives results in some checkpatch warnings. But these should fixed in separate patches corrected separately to facilitate review.

Signed-off-by: Heinrich Schuchardt heinrich.schuchardt@canonical.com --- arch/arm/cpu/armv7/s5p-common/timer.c | 2 +- .../arm/include/asm/arch-aspeed/scu_ast2500.h | 4 +- arch/arm/include/asm/arch-aspeed/wdt.h | 4 +- arch/arm/include/asm/arch-hi6220/pinmux.h | 2 +- arch/arm/include/asm/arch-rockchip/clock.h | 8 +- arch/arm/include/asm/arch-tegra/ap.h | 6 +- arch/arm/include/asm/arch-tegra/clock.h | 30 +++--- arch/arm/include/asm/arch-tegra/funcmux.h | 2 +- arch/arm/include/asm/arch-tegra/ivc.h | 12 +-- arch/arm/include/asm/arch-tegra/sys_proto.h | 6 +- arch/arm/include/asm/arch-tegra/tegra_i2c.h | 2 +- arch/arm/include/asm/arch-tegra/warmboot.h | 2 +- arch/arm/include/asm/arch-tegra124/display.h | 4 +- arch/arm/include/asm/arch-tegra20/emc.h | 4 +- arch/arm/include/asm/omap_gpio.h | 2 +- arch/arm/mach-bcm283x/include/mach/msg.h | 10 +- arch/arm/mach-exynos/clock.c | 2 +- arch/arm/mach-exynos/clock_init.h | 2 +- arch/arm/mach-exynos/common_setup.h | 2 +- arch/arm/mach-exynos/dmc_init_ddr3.c | 4 +- arch/arm/mach-exynos/exynos5_setup.h | 4 +- arch/arm/mach-exynos/include/mach/clk.h | 2 +- arch/arm/mach-exynos/include/mach/pinmux.h | 4 +- arch/arm/mach-exynos/include/mach/spl.h | 2 +- arch/arm/mach-imx/ddrmc-vf610-calibration.h | 2 +- arch/arm/mach-s5pc1xx/include/mach/pinmux.h | 4 +- .../cmd_stm32prog/stm32prog_serial.c | 4 +- arch/arm/mach-tegra/clock.c | 10 +- arch/arm/mach-tegra/tegra114/clock.c | 4 +- arch/arm/mach-tegra/tegra124/clock.c | 6 +- arch/arm/mach-tegra/tegra20/clock.c | 4 +- arch/arm/mach-tegra/tegra20/emc.c | 4 +- arch/arm/mach-tegra/tegra210/clock.c | 4 +- arch/arm/mach-tegra/tegra30/clock.c | 4 +- arch/microblaze/include/asm/microblaze_intc.h | 2 +- arch/mips/mach-octeon/bootoctlinux.c | 6 +- arch/mips/mach-octeon/cpu.c | 2 +- arch/mips/mach-octeon/cvmx-bootmem.c | 8 +- arch/mips/mach-octeon/cvmx-coremask.c | 6 +- arch/mips/mach-octeon/cvmx-helper-cfg.c | 32 +++---- arch/mips/mach-octeon/cvmx-helper-fdt.c | 32 +++---- arch/mips/mach-octeon/cvmx-helper-jtag.c | 2 +- arch/mips/mach-octeon/cvmx-helper-util.c | 12 +-- arch/mips/mach-octeon/cvmx-helper.c | 42 ++++----- arch/mips/mach-octeon/cvmx-pcie.c | 40 ++++---- arch/mips/mach-octeon/cvmx-qlm.c | 30 +++--- .../mach-octeon/include/mach/bootoct_cmd.h | 2 +- .../mach-octeon/include/mach/cvmx-bootmem.h | 42 ++++----- .../mach-octeon/include/mach/cvmx-cmd-queue.h | 18 ++-- .../mach-octeon/include/mach/cvmx-coremask.h | 40 ++++---- .../mach-octeon/include/mach/cvmx-error.h | 54 +++++------ arch/mips/mach-octeon/include/mach/cvmx-fpa.h | 10 +- .../mips/mach-octeon/include/mach/cvmx-fpa1.h | 6 +- .../mips/mach-octeon/include/mach/cvmx-fpa3.h | 10 +- .../mips/mach-octeon/include/mach/cvmx-fuse.h | 8 +- .../include/mach/cvmx-global-resources.h | 12 +-- .../include/mach/cvmx-helper-agl.h | 8 +- .../include/mach/cvmx-helper-bgx.h | 30 +++--- .../include/mach/cvmx-helper-board.h | 28 +++--- .../include/mach/cvmx-helper-cfg.h | 70 +++++++------- .../include/mach/cvmx-helper-errata.h | 4 +- .../include/mach/cvmx-helper-fdt.h | 64 ++++++------- .../include/mach/cvmx-helper-fpa.h | 2 +- .../include/mach/cvmx-helper-gpio.h | 22 ++--- .../include/mach/cvmx-helper-ilk.h | 8 +- .../include/mach/cvmx-helper-jtag.h | 2 +- .../include/mach/cvmx-helper-loop.h | 4 +- .../include/mach/cvmx-helper-npi.h | 4 +- .../include/mach/cvmx-helper-pki.h | 4 +- .../include/mach/cvmx-helper-pko3.h | 4 +- .../include/mach/cvmx-helper-rgmii.h | 12 +-- .../include/mach/cvmx-helper-sfp.h | 30 +++--- .../include/mach/cvmx-helper-sgmii.h | 10 +- .../include/mach/cvmx-helper-spi.h | 8 +- .../include/mach/cvmx-helper-srio.h | 10 +- .../include/mach/cvmx-helper-util.h | 26 ++--- .../include/mach/cvmx-helper-xaui.h | 14 +-- .../mach-octeon/include/mach/cvmx-helper.h | 62 ++++++------ .../mach-octeon/include/mach/cvmx-hwfau.h | 48 +++++----- .../mach-octeon/include/mach/cvmx-hwpko.h | 24 ++--- arch/mips/mach-octeon/include/mach/cvmx-ipd.h | 4 +- .../mips/mach-octeon/include/mach/cvmx-pcie.h | 26 ++--- arch/mips/mach-octeon/include/mach/cvmx-pip.h | 2 +- .../include/mach/cvmx-pki-resources.h | 26 ++--- .../mach/cvmx-pko-internal-ports-range.h | 4 +- .../include/mach/cvmx-pko3-queue.h | 2 +- arch/mips/mach-octeon/include/mach/cvmx-pow.h | 32 +++---- arch/mips/mach-octeon/include/mach/cvmx-qlm.h | 22 ++--- .../mips/mach-octeon/include/mach/cvmx-regs.h | 14 +-- .../mach-octeon/include/mach/cvmx-scratch.h | 8 +- arch/mips/mach-octeon/include/mach/cvmx-wqe.h | 10 +- .../mach-octeon/include/mach/octeon-feature.h | 2 +- .../mach-octeon/include/mach/octeon-model.h | 2 +- .../mach-octeon/include/mach/octeon_eth.h | 2 +- .../mach-octeon/include/mach/octeon_fdt.h | 24 ++--- .../mach-octeon/include/mach/octeon_pci.h | 2 +- .../mach-octeon/include/mach/octeon_qlm.h | 2 +- arch/mips/mach-octeon/octeon_fdt.c | 22 ++--- arch/mips/mach-octeon/octeon_qlm.c | 18 ++-- arch/powerpc/cpu/mpc8xxx/fsl_pamu.c | 2 +- arch/riscv/include/asm/smp.h | 10 +- arch/riscv/include/asm/spl.h | 2 +- arch/sandbox/cpu/cpu.c | 2 +- arch/sandbox/cpu/os.c | 4 +- arch/sandbox/cpu/state.c | 4 +- arch/sandbox/include/asm/eth.h | 8 +- arch/sandbox/include/asm/gpio.h | 12 +-- arch/sandbox/include/asm/sdl.h | 14 +-- arch/sandbox/include/asm/state.h | 12 +-- arch/sandbox/include/asm/test.h | 30 +++--- arch/sandbox/include/asm/u-boot-sandbox.h | 4 +- arch/x86/cpu/apollolake/fsp_bindings.c | 4 +- arch/x86/cpu/broadwell/pch.c | 2 +- arch/x86/cpu/broadwell/refcode.c | 2 +- arch/x86/cpu/intel_common/lpc.c | 2 +- arch/x86/cpu/intel_common/p2sb.c | 2 +- arch/x86/cpu/ivybridge/bd82x6x.c | 4 +- arch/x86/cpu/mp_init.c | 10 +- arch/x86/cpu/mtrr.c | 2 +- arch/x86/cpu/slimbootloader/sdram.c | 2 +- arch/x86/include/asm/acpi_table.h | 16 ++-- .../asm/arch-apollolake/fsp_bindings.h | 4 +- arch/x86/include/asm/arch-apollolake/lpc.h | 2 +- .../include/asm/arch-apollolake/systemagent.h | 6 +- .../x86/include/asm/arch-coreboot/timestamp.h | 2 +- arch/x86/include/asm/arch-ivybridge/pch.h | 2 +- .../include/asm/arch-ivybridge/sandybridge.h | 2 +- arch/x86/include/asm/bootm.h | 2 +- arch/x86/include/asm/cb_sysinfo.h | 4 +- arch/x86/include/asm/coreboot_tables.h | 2 +- arch/x86/include/asm/cpu.h | 10 +- arch/x86/include/asm/cpu_common.h | 26 ++--- arch/x86/include/asm/cpu_x86.h | 2 +- arch/x86/include/asm/e820.h | 2 +- arch/x86/include/asm/fast_spi.h | 4 +- arch/x86/include/asm/fsp/fsp_support.h | 34 +++---- arch/x86/include/asm/fsp1/fsp_support.h | 8 +- arch/x86/include/asm/fsp2/fsp_api.h | 4 +- arch/x86/include/asm/fsp2/fsp_internal.h | 8 +- arch/x86/include/asm/hob.h | 18 ++-- arch/x86/include/asm/i8254.h | 2 +- arch/x86/include/asm/intel_acpi.h | 2 +- arch/x86/include/asm/intel_opregion.h | 2 +- arch/x86/include/asm/intel_pinctrl.h | 22 ++--- arch/x86/include/asm/lpc_common.h | 2 +- arch/x86/include/asm/me_common.h | 6 +- arch/x86/include/asm/microcode.h | 4 +- arch/x86/include/asm/mp.h | 8 +- arch/x86/include/asm/mrc_common.h | 2 +- arch/x86/include/asm/mrccache.h | 10 +- arch/x86/include/asm/mtrr.h | 8 +- arch/x86/include/asm/pch_common.h | 2 +- arch/x86/include/asm/pci.h | 6 +- arch/x86/include/asm/sfi.h | 2 +- arch/x86/include/asm/tables.h | 2 +- arch/x86/include/asm/u-boot-x86.h | 4 +- arch/x86/include/asm/zimage.h | 4 +- arch/x86/lib/hob.c | 8 +- arch/x86/lib/mrccache.c | 4 +- board/Marvell/octeontx/board-fdt.c | 2 +- board/Marvell/octeontx2/board-fdt.c | 2 +- board/emulation/qemu-ppce500/qemu-ppce500.c | 2 +- board/gdsys/a38x/hre.c | 14 +-- board/google/chromebook_coral/coral.c | 2 +- board/ti/dra7xx/evm.c | 2 +- board/ti/omap5_uevm/evm.c | 6 +- board/ti/panda/panda.c | 4 +- board/ti/sdp4430/sdp.c | 4 +- boot/android_ab.c | 10 +- boot/bootm.c | 10 +- boot/fdt_region.c | 2 +- boot/image-android-dt.c | 4 +- boot/image-board.c | 2 +- boot/image-fdt.c | 2 +- boot/image-fit-sig.c | 2 +- boot/image-fit.c | 4 +- boot/image.c | 6 +- boot/pxe_utils.c | 2 +- cmd/acpi.c | 2 +- cmd/cramfs.c | 4 +- cmd/cros_ec.c | 4 +- cmd/gpt.c | 10 +- cmd/jffs2.c | 16 ++-- cmd/mtdparts.c | 58 ++++++------ cmd/pci.c | 2 +- cmd/pinmux.c | 2 +- cmd/setexpr.c | 2 +- cmd/sf.c | 8 +- cmd/tpm-common.c | 14 +-- common/autoboot.c | 8 +- common/board_r.c | 2 +- common/bootstage.c | 4 +- common/cli.c | 4 +- common/command.c | 2 +- common/console.c | 2 +- common/edid.c | 4 +- common/fdt_support.c | 2 +- common/hash.c | 2 +- common/log.c | 4 +- common/spl/spl.c | 6 +- common/stdio.c | 2 +- disk/part.c | 2 +- disk/part_efi.c | 2 +- drivers/block/blk-uclass.c | 2 +- drivers/block/blk_legacy.c | 2 +- drivers/clk/aspeed/clk_ast2500.c | 4 +- drivers/clk/aspeed/clk_ast2600.c | 2 +- drivers/clk/microchip/mpfs_clk.h | 6 +- drivers/core/acpi.c | 4 +- drivers/core/device-remove.c | 2 +- drivers/core/device.c | 2 +- drivers/core/lists.c | 2 +- drivers/core/of_access.c | 2 +- drivers/core/root.c | 2 +- drivers/core/uclass.c | 2 +- drivers/crypto/ace_sha.h | 2 +- drivers/crypto/fsl/fsl_hash.c | 6 +- drivers/crypto/fsl/jobdesc.c | 4 +- drivers/fastboot/fb_getvar.c | 2 +- drivers/fastboot/fb_mmc.c | 4 +- drivers/gpio/gpio-uclass.c | 4 +- drivers/gpio/iproc_gpio.c | 2 +- drivers/gpio/sunxi_gpio.c | 2 +- drivers/gpio/tegra_gpio.c | 2 +- drivers/i2c/designware_i2c.c | 8 +- drivers/i2c/designware_i2c.h | 2 +- drivers/i2c/i2c-uclass.c | 4 +- drivers/i2c/mvtwsi.c | 30 +++--- drivers/i2c/octeon_i2c.c | 30 +++--- drivers/i2c/s3c24x0_i2c.c | 2 +- drivers/input/cros_ec_keyb.c | 6 +- drivers/input/i8042.c | 6 +- drivers/input/input.c | 10 +- drivers/input/key_matrix.c | 4 +- drivers/input/tegra-kbc.c | 6 +- drivers/misc/cros_ec.c | 20 ++-- drivers/misc/cros_ec_lpc.c | 2 +- drivers/misc/cros_ec_sandbox.c | 8 +- drivers/misc/cros_ec_spi.c | 2 +- drivers/mmc/mmc.c | 4 +- drivers/mmc/mmc_private.h | 6 +- drivers/mmc/mmc_spi.c | 6 +- drivers/mmc/octeontx_hsmmc.c | 36 +++---- drivers/mmc/sdhci-adma.c | 2 +- drivers/mtd/mtd_uboot.c | 2 +- drivers/mtd/mtdcore.c | 2 +- drivers/mtd/mtdpart.c | 4 +- drivers/mtd/nand/raw/cortina_nand.c | 20 ++-- drivers/mtd/nand/raw/nand_util.c | 22 ++--- drivers/mtd/nand/raw/octeontx_bch.c | 4 +- drivers/mtd/nand/raw/octeontx_bch.h | 6 +- drivers/mtd/nand/raw/octeontx_nand.c | 2 +- drivers/mtd/nand/raw/omap_gpmc.c | 4 +- drivers/mtd/nand/raw/tegra_nand.c | 16 ++-- drivers/mtd/onenand/onenand_base.c | 14 +-- drivers/net/fec_mxc.c | 6 +- drivers/net/octeontx2/cgx.c | 2 +- drivers/net/octeontx2/cgx.h | 2 +- drivers/net/octeontx2/lmt.h | 2 +- drivers/net/octeontx2/nix.c | 2 +- drivers/net/octeontx2/nix_af.c | 4 +- drivers/net/octeontx2/rvu.h | 2 +- drivers/net/octeontx2/rvu_common.c | 2 +- drivers/net/pfe_eth/pfe_driver.c | 8 +- drivers/net/pfe_eth/pfe_eth.c | 2 +- drivers/net/pfe_eth/pfe_firmware.c | 8 +- drivers/net/pfe_eth/pfe_hw.c | 6 +- drivers/pci/pci-uclass.c | 6 +- drivers/pci/pci_common.c | 2 +- drivers/pci/pci_internal.h | 4 +- drivers/pci/pci_rom.c | 2 +- drivers/pinctrl/intel/pinctrl.c | 8 +- drivers/power/exynos-tmu.c | 8 +- drivers/power/palmas.c | 2 +- drivers/power/regulator/tps65090_regulator.c | 2 +- drivers/power/tps6586x.c | 2 +- drivers/remoteproc/sandbox_testproc.c | 2 +- drivers/remoteproc/stm32_copro.c | 14 +-- drivers/serial/serial_bcm283x_mu.c | 2 +- drivers/serial/serial_bcm283x_pl011.c | 2 +- drivers/sound/hda_codec.c | 12 +-- drivers/sound/max98088.c | 12 +-- drivers/sound/max98090.c | 10 +- drivers/sound/max98095.c | 12 +-- drivers/sound/maxim_codec.c | 6 +- drivers/sound/maxim_codec.h | 6 +- drivers/sound/samsung-i2s.c | 6 +- drivers/sound/tegra_ahub.c | 2 +- drivers/sound/tegra_i2s_priv.h | 2 +- drivers/sound/wm8994.c | 14 +-- drivers/spi/ich.c | 4 +- drivers/spi/octeon_spi.c | 4 +- drivers/tpm/cr50_i2c.c | 2 +- drivers/tpm/sandbox_common.h | 2 +- drivers/tpm/tpm2_tis_spi.c | 2 +- drivers/tpm/tpm_atmel_twi.c | 2 +- drivers/usb/host/ehci.h | 2 +- drivers/usb/host/xhci-mem.c | 46 ++++----- drivers/usb/host/xhci-ring.c | 26 ++--- drivers/usb/host/xhci.c | 34 +++---- drivers/usb/musb-new/musb_gadget.c | 2 +- drivers/usb/musb-new/musb_gadget_ep0.c | 2 +- drivers/usb/musb-new/usb-compat.h | 2 +- drivers/video/bridge/ps862x.c | 2 +- drivers/video/console_truetype.c | 6 +- drivers/video/imx/ipu_common.c | 10 +- drivers/video/imx/ipu_disp.c | 6 +- drivers/video/imx/mxc_ipuv3_fb.c | 4 +- drivers/video/meson/simplefb_common.h | 2 +- drivers/video/panel-uclass.c | 2 +- drivers/video/rockchip/rk_hdmi.h | 6 +- drivers/video/rockchip/rk_vop.c | 2 +- drivers/video/rockchip/rk_vop.h | 4 +- drivers/video/sunxi/simplefb_common.h | 2 +- drivers/video/tegra.c | 2 +- drivers/video/ti/am335x-fb.c | 4 +- drivers/video/video_bmp.c | 2 +- drivers/video/videomodes.c | 2 +- drivers/virtio/virtio_pci_modern.c | 4 +- env/common.c | 6 +- fs/cbfs/cbfs.c | 10 +- fs/fat/fat.c | 8 +- include/abuf.h | 4 +- include/acpi/acpi_device.h | 22 ++--- include/acpi/acpi_dp.h | 26 ++--- include/acpi/acpi_s3.h | 2 +- include/acpi/acpi_table.h | 6 +- include/acpi/acpigen.h | 4 +- include/ahci.h | 12 +-- include/android_ab.h | 2 +- include/asm-generic/gpio.h | 56 +++++------ include/audio_codec.h | 2 +- include/autoboot.h | 6 +- include/backlight.h | 4 +- include/binman.h | 10 +- include/blk.h | 48 +++++----- include/boot_fit.h | 2 +- include/bootcount.h | 6 +- include/bootm.h | 6 +- include/bootretry.h | 2 +- include/bootstage.h | 16 ++-- include/button.h | 4 +- include/cache.h | 6 +- include/cbfs.h | 30 +++--- include/cli.h | 14 +-- include/clk.h | 46 ++++----- include/clk/sunxi.h | 2 +- include/command.h | 12 +-- include/compiler.h | 2 +- include/console.h | 14 +-- include/cpu_func.h | 2 +- include/cros_ec.h | 82 ++++++++-------- include/crypt.h | 2 +- include/display.h | 6 +- include/display_options.h | 4 +- include/dm/acpi.h | 14 +-- include/dm/device-internal.h | 22 ++--- include/dm/pci.h | 4 +- include/dm/test.h | 6 +- include/dm/uclass-internal.h | 26 ++--- include/dm/util.h | 2 +- include/dma.h | 24 ++--- include/dsi_host.h | 4 +- include/dwmmc.h | 4 +- include/edid.h | 10 +- include/efi_loader.h | 6 +- include/env.h | 50 +++++----- include/env_internal.h | 6 +- include/extension_board.h | 2 +- include/fdt_region.h | 8 +- include/fdt_support.h | 30 +++--- include/fdtdec.h | 94 +++++++++---------- include/fs.h | 16 ++-- include/fsl_ddr_sdram.h | 2 +- include/generic-phy.h | 40 ++++---- include/gzip.h | 10 +- include/handoff.h | 2 +- include/hash.h | 8 +- include/hda_codec.h | 18 ++-- include/hw_sha.h | 6 +- include/hwspinlock.h | 2 +- include/i2c.h | 42 ++++----- include/i2c_eeprom.h | 6 +- include/i2s.h | 4 +- include/ide.h | 2 +- include/image.h | 56 +++++------ include/input.h | 16 ++-- include/iotrace.h | 4 +- include/irq.h | 22 ++--- include/key_matrix.h | 4 +- include/lcd.h | 12 +-- include/led.h | 8 +- include/linux/clk-provider.h | 10 +- include/linux/string.h | 6 +- include/linux/zstd.h | 2 +- include/log.h | 2 +- include/mailbox-uclass.h | 4 +- include/mailbox.h | 10 +- include/memalign.h | 2 +- include/membuff.h | 30 +++--- include/menu.h | 2 +- include/miiphy.h | 4 +- include/mmc.h | 22 ++--- include/net.h | 14 +-- include/net/dsa.h | 8 +- include/net/pcap.h | 12 +-- include/ns16550.h | 4 +- include/of_live.h | 2 +- include/p2sb.h | 10 +- include/panel.h | 6 +- include/part.h | 38 ++++---- include/pch.h | 10 +- include/pci.h | 58 ++++++------ include/pci_ep.h | 28 +++--- include/pci_rom.h | 2 +- include/phy-sun4i-usb.h | 4 +- include/physmem.h | 2 +- include/power-domain.h | 14 +-- include/power/acpi_pmc.h | 10 +- include/power/pmic.h | 14 +-- include/power/regulator.h | 38 ++++---- include/pwm.h | 6 +- include/pxe_utils.h | 4 +- include/ram.h | 2 +- include/reboot-mode/reboot-mode.h | 2 +- include/relocate.h | 8 +- include/remoteproc.h | 34 +++---- include/reset.h | 28 +++--- include/rtc.h | 34 +++---- include/scmi_agent.h | 4 +- include/scsi.h | 4 +- include/sdhci.h | 4 +- include/search.h | 2 +- include/serial.h | 8 +- include/smbios.h | 4 +- include/smem.h | 6 +- include/sort.h | 2 +- include/sound.h | 6 +- include/spi.h | 14 +-- include/spi_flash.h | 10 +- include/spl.h | 24 ++--- include/spl_gpio.h | 6 +- include/spmi/spmi.h | 4 +- include/syscon.h | 10 +- include/test/suites.h | 2 +- include/test/ut.h | 20 ++-- include/time.h | 10 +- include/tmu.h | 4 +- include/tpm-common.h | 10 +- include/tpm-v1.h | 58 ++++++------ include/tpm-v2.h | 36 +++---- include/tpm_api.h | 58 ++++++------ include/tps6586x.h | 6 +- include/trace.h | 2 +- include/u-boot/crc.h | 10 +- include/u-boot/ecdsa.h | 2 +- include/u-boot/fdt-libcrypto.h | 2 +- include/u-boot/hash-checksum.h | 2 +- include/u-boot/lz4.h | 2 +- include/u-boot/rsa.h | 4 +- include/ufs.h | 6 +- include/usb.h | 26 ++--- include/usb/xhci.h | 4 +- include/usb_ether.h | 8 +- include/video.h | 24 ++--- include/video_bridge.h | 8 +- include/video_console.h | 18 ++-- include/video_osd.h | 8 +- include/virtio.h | 26 ++--- include/vsprintf.h | 24 ++--- include/wait_bit.h | 2 +- include/wdt.h | 2 +- lib/acpi/acpi_device.c | 8 +- lib/binman.c | 2 +- lib/efi/efi_app.c | 2 +- lib/efi/efi_stub.c | 2 +- lib/efi_loader/efi_acpi.c | 2 +- lib/efi_loader/efi_device_path.c | 6 +- lib/efi_loader/efi_device_path_to_text.c | 8 +- lib/efi_loader/efi_device_path_utilities.c | 16 ++-- lib/efi_loader/efi_memory.c | 4 +- lib/efi_loader/efi_smbios.c | 2 +- lib/efi_selftest/dtbdump.c | 2 +- lib/efi_selftest/efi_selftest.c | 6 +- lib/efi_selftest/efi_selftest_block_device.c | 12 +-- lib/efi_selftest/efi_selftest_controllers.c | 10 +- lib/efi_selftest/efi_selftest_exception.c | 2 +- lib/efi_selftest/efi_selftest_fdt.c | 2 +- lib/efi_selftest/efi_selftest_load_file.c | 2 +- lib/efi_selftest/efi_selftest_loadimage.c | 2 +- .../efi_selftest_miniapp_exception.c | 2 +- .../efi_selftest_miniapp_return.c | 2 +- .../efi_selftest_startimage_exit.c | 2 +- .../efi_selftest_startimage_return.c | 2 +- lib/efi_selftest/efi_selftest_tcg2.c | 18 ++-- lib/fdtdec.c | 4 +- lib/of_live.c | 2 +- lib/rsa/rsa-mod-exp.c | 4 +- lib/rsa/rsa-sign.c | 12 +-- lib/rsa/rsa-verify.c | 8 +- lib/strto.c | 2 +- lib/tpm-utils.h | 10 +- lib/zstd/bitstream.h | 8 +- lib/zstd/decompress.c | 6 +- net/eth_internal.h | 2 +- net/tftp.c | 2 +- scripts/dtc/libfdt/fdt_rw.c | 2 +- scripts/dtc/libfdt/libfdt.h | 4 +- scripts/dtc/srcpos.c | 4 +- scripts/dtc/srcpos.h | 2 +- scripts/dtc/util.h | 12 +-- test/compression.c | 2 +- test/dm/acpi.h | 4 +- test/dm/core.c | 2 +- test/dm/of_platdata.c | 2 +- test/dm/test-dm.c | 2 +- test/dm/video.c | 6 +- test/log/syslog_test.h | 4 +- test/test-main.c | 18 ++-- tools/fit_common.h | 4 +- tools/ifdtool.c | 18 ++-- tools/image-host.c | 4 +- tools/imagetool.h | 8 +- tools/rkcommon.h | 8 +- 524 files changed, 2505 insertions(+), 2505 deletions(-)

diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c index 8141f40d5c..8533d04878 100644 --- a/arch/arm/cpu/armv7/s5p-common/timer.c +++ b/arch/arm/cpu/armv7/s5p-common/timer.c @@ -37,7 +37,7 @@ static inline struct s5p_timer *s5p_get_base_timer(void) * This operates at 1MHz and counts downwards. It will wrap about every * hour (2^32 microseconds). * - * @return current value of timer + * Return: current value of timer */ static unsigned long timer_get_us_down(void) { diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h index 8db4901cc9..50d6a6bc76 100644 --- a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h +++ b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h @@ -217,14 +217,14 @@ struct ast2500_scu { * ast_get_clk() - get a pointer to Clock Driver * * @devp, OUT - pointer to Clock Driver - * @return zero on success, error code (< 0) otherwise. + * Return: zero on success, error code (< 0) otherwise. */ int ast_get_clk(struct udevice **devp);

/** * ast_get_scu() - get a pointer to SCU registers * - * @return pointer to struct ast2500_scu on success, ERR_PTR otherwise + * Return: pointer to struct ast2500_scu on success, ERR_PTR otherwise */ void *ast_get_scu(void);

diff --git a/arch/arm/include/asm/arch-aspeed/wdt.h b/arch/arm/include/asm/arch-aspeed/wdt.h index fb04d41d3c..6fac7ffc1d 100644 --- a/arch/arm/include/asm/arch-aspeed/wdt.h +++ b/arch/arm/include/asm/arch-aspeed/wdt.h @@ -84,7 +84,7 @@ struct ast_wdt { * gets Reset Mode value from it. * * @flags: flags parameter passed into wdt_reset or wdt_start - * @return Reset Mode value + * Return: Reset Mode value */ u32 ast_reset_mode_from_flags(ulong flags);

@@ -93,7 +93,7 @@ u32 ast_reset_mode_from_flags(ulong flags); * gets Reset Mask value from it. Reset Mask is only supported on ast2500 * * @flags: flags parameter passed into wdt_reset or wdt_start - * @return Reset Mask value + * Return: Reset Mask value */ u32 ast_reset_mask_from_flags(ulong flags);

diff --git a/arch/arm/include/asm/arch-hi6220/pinmux.h b/arch/arm/include/asm/arch-hi6220/pinmux.h index b4a9957e80..d18d2142f6 100644 --- a/arch/arm/include/asm/arch-hi6220/pinmux.h +++ b/arch/arm/include/asm/arch-hi6220/pinmux.h @@ -74,7 +74,7 @@ struct hi6220_pinmux1_regs { * pull-up/down and drive strength. * * @param peripheral peripheral to be configured - * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + * Return: 0 if ok, -1 on error (e.g. unsupported peripheral) */ int hi6220_pinmux_config(int peripheral);

diff --git a/arch/arm/include/asm/arch-rockchip/clock.h b/arch/arm/include/asm/arch-rockchip/clock.h index 5108180ea7..566bdcc4fa 100644 --- a/arch/arm/include/asm/arch-rockchip/clock.h +++ b/arch/arm/include/asm/arch-rockchip/clock.h @@ -129,7 +129,7 @@ struct sysreset_reg { * * @input_rate: Input clock rate in Hz * @output_rate: Output clock rate in Hz - * @return divisor register value to use + * Return: divisor register value to use */ static inline u32 clk_get_divisor(ulong input_rate, uint output_rate) { @@ -144,14 +144,14 @@ static inline u32 clk_get_divisor(ulong input_rate, uint output_rate) /** * rockchip_get_cru() - get a pointer to the clock/reset unit registers * - * @return pointer to registers, or -ve error on error + * Return: pointer to registers, or -ve error on error */ void *rockchip_get_cru(void);

/** * rockchip_get_pmucru() - get a pointer to the clock/reset unit registers * - * @return pointer to registers, or -ve error on error + * Return: pointer to registers, or -ve error on error */ void *rockchip_get_pmucru(void);

@@ -168,7 +168,7 @@ int rockchip_get_clk(struct udevice **devp); * @pdev: clock udevice * @reg_offset: the first offset in cru for softreset registers * @reg_number: the reg numbers of softreset registers - * @return 0 success, or error value + * Return: 0 success, or error value */ int rockchip_reset_bind(struct udevice *pdev, u32 reg_offset, u32 reg_number);

diff --git a/arch/arm/include/asm/arch-tegra/ap.h b/arch/arm/include/asm/arch-tegra/ap.h index de21dffa55..78aeb25ac7 100644 --- a/arch/arm/include/asm/arch-tegra/ap.h +++ b/arch/arm/include/asm/arch-tegra/ap.h @@ -42,21 +42,21 @@ extern void _start(void); /** * Works out the SOC/SKU type used for clocks settings * - * @return SOC type - see TEGRA_SOC... + * Return: SOC type - see TEGRA_SOC... */ int tegra_get_chip_sku(void);

/** * Returns the pure SOC (chip ID) from the HIDREV register * - * @return SOC ID - see CHIPID_TEGRAxx... + * Return: SOC ID - see CHIPID_TEGRAxx... */ int tegra_get_chip(void);

/** * Returns the SKU ID from the sku_info register * - * @return SKU ID - see SKU_ID_Txx... + * Return: SKU ID - see SKU_ID_Txx... */ int tegra_get_sku_info(void);

diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h index 1d80d9e946..6586015fd2 100644 --- a/arch/arm/include/asm/arch-tegra/clock.h +++ b/arch/arm/include/asm/arch-tegra/clock.h @@ -70,7 +70,7 @@ unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn, * @param pllout pll output id * @param rate desired output rate * - * @return 0 if ok, -1 on error (invalid clock id or no suitable divider) + * Return: 0 if ok, -1 on error (invalid clock id or no suitable divider) */ int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate); @@ -193,7 +193,7 @@ void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source, * specific knowledge of system-level clock tree structure. * * @param periph_id peripheral to query - * @return clock ID of the peripheral's current parent clock + * Return: clock ID of the peripheral's current parent clock */ enum clock_id clock_get_periph_parent(enum periph_id periph_id);

@@ -204,7 +204,7 @@ enum clock_id clock_get_periph_parent(enum periph_id periph_id); * @param periph_id peripheral to start * @param parent PLL id of required parent clock * @param rate Required clock rate in Hz - * @return rate selected in Hz, or -1U if something went wrong + * Return: rate selected in Hz, or -1U if something went wrong */ unsigned clock_start_periph_pll(enum periph_id periph_id, enum clock_id parent, unsigned rate); @@ -217,7 +217,7 @@ unsigned clock_start_periph_pll(enum periph_id periph_id, * @param periph_id peripheral to start * @param parent PLL id of parent clock (used to calculate rate, you * must know this!) - * @return clock rate of peripheral in Hz + * Return: clock rate of peripheral in Hz */ unsigned long clock_get_periph_rate(enum periph_id periph_id, enum clock_id parent); @@ -233,7 +233,7 @@ unsigned long clock_get_periph_rate(enum periph_id periph_id, * @param rate Required clock rate in Hz * @param extra_div value for the second-stage divisor (NULL if one is not available) - * @return rate selected in Hz, or -1U if something went wrong + * Return: rate selected in Hz, or -1U if something went wrong */ unsigned clock_adjust_periph_pll_div(enum periph_id periph_id, enum clock_id parent, unsigned rate, int *extra_div); @@ -242,7 +242,7 @@ unsigned clock_adjust_periph_pll_div(enum periph_id periph_id, * Returns the clock rate of a specified clock, in Hz. * * @param parent PLL id of clock to check - * @return rate of clock in Hz + * Return: rate of clock in Hz */ unsigned clock_get_rate(enum clock_id clkid);

@@ -265,21 +265,21 @@ void clock_ll_start_uart(enum periph_id periph_id); * * @param blob FDT blob to use * @param node Node to look at - * @return peripheral ID, or PERIPH_ID_NONE if none + * Return: peripheral ID, or PERIPH_ID_NONE if none */ int clock_decode_periph_id(struct udevice *dev);

/** * Checks if the oscillator bypass is enabled (XOBP bit) * - * @return 1 if bypass is enabled, 0 if not + * Return: 1 if bypass is enabled, 0 if not */ int clock_get_osc_bypass(void);

/* * Checks that clocks are valid and prints a warning if not * - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int clock_verify(void);

@@ -310,7 +310,7 @@ struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid); * @param mux_bits Set to number of bits in mux register * @param divider_bits Set to the relevant MASK_BITS_* value * @param type Set to the SoC-specific clock type - * @return 0 on success, -1 on error + * Return: 0 on success, -1 on error */ int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, int *divider_bits, int *type); @@ -324,7 +324,7 @@ int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, * * @param periph_id peripheral to query * @param source raw clock source mux value - * @return the CLOCK_ID_* value @source represents + * Return: the CLOCK_ID_* value @source represents */ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source);

@@ -338,7 +338,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source); * @param source PLL id of required parent clock * @param mux_bits Set to number of bits in mux register: 2 or 4 * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) + * Return: mux value (0-4, or -1 if not found) */ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits); @@ -349,7 +349,7 @@ int get_periph_clock_source(enum periph_id periph_id, * provided. * * @param clk_id Clock ID according to tegra30 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + * Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ enum periph_id clk_id_to_periph_id(int clk_id);

@@ -367,7 +367,7 @@ enum periph_id clk_id_to_periph_id(int clk_id); * @param m PLL input divider(DIVN) * @param p post divider(DIVP) * @param cpcon base PLL charge pump(CPCON) - * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot + * Return: 0 if ok, -1 on error (the requested PLL is incorrect and cannot * be overridden), 1 if PLL is already correct */ int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon); @@ -416,7 +416,7 @@ extern struct periph_clk_init periph_clk_init_table[]; * Enable output clock for external peripherals * * @param clk_id Clock ID to output (1, 2 or 3) - * @return 0 if OK. -ve on error + * Return: 0 if OK. -ve on error */ int clock_external_output(int clk_id);

diff --git a/arch/arm/include/asm/arch-tegra/funcmux.h b/arch/arm/include/asm/arch-tegra/funcmux.h index cf3ce3b411..ebef6ea1e8 100644 --- a/arch/arm/include/asm/arch-tegra/funcmux.h +++ b/arch/arm/include/asm/arch-tegra/funcmux.h @@ -21,7 +21,7 @@ * * @param id Peripheral id * @param config Configuration to use (FUNCMUX_...), 0 for default - * @return 0 if ok, -1 on error (e.g. incorrect id or config) + * Return: 0 if ok, -1 on error (e.g. incorrect id or config) */ int funcmux_select(enum periph_id id, int config);

diff --git a/arch/arm/include/asm/arch-tegra/ivc.h b/arch/arm/include/asm/arch-tegra/ivc.h index 52c10b8fab..fef8b16845 100644 --- a/arch/arm/include/asm/arch-tegra/ivc.h +++ b/arch/arm/include/asm/arch-tegra/ivc.h @@ -88,7 +88,7 @@ struct tegra_ivc { * @ivc The IVC channel. * @frame Pointer to be filled with the address of the frame to receive. * - * @return 0 if a frame is available, else a negative error code. + * Return: 0 if a frame is available, else a negative error code. */ int tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc, void **frame);

@@ -102,7 +102,7 @@ int tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc, void **frame); * * @ivc The IVC channel. * - * @return 0 if OK, else a negative error code. + * Return: 0 if OK, else a negative error code. */ int tegra_ivc_read_advance(struct tegra_ivc *ivc);

@@ -116,7 +116,7 @@ int tegra_ivc_read_advance(struct tegra_ivc *ivc); * @ivc The IVC channel. * @frame Pointer to be filled with the address of the frame to fill. * - * @return 0 if a frame is available, else a negative error code. + * Return: 0 if a frame is available, else a negative error code. */ int tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc, void **frame);

@@ -130,7 +130,7 @@ int tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc, void **frame); * * @ivc The IVC channel. * - * @return 0 if OK, else a negative error code. + * Return: 0 if OK, else a negative error code. */ int tegra_ivc_write_advance(struct tegra_ivc *ivc);

@@ -141,7 +141,7 @@ int tegra_ivc_write_advance(struct tegra_ivc *ivc); * * @ivc The IVC channel. * - * @return 0 if the channel is ready for communication, or -EAGAIN if a + * Return: 0 if the channel is ready for communication, or -EAGAIN if a * channel reset is in progress. */ int tegra_ivc_channel_notified(struct tegra_ivc *ivc); @@ -167,7 +167,7 @@ void tegra_ivc_channel_reset(struct tegra_ivc *ivc); * @nframes Number of frames in each shared memory buffer. * @frame_size Size of each frame. * - * @return 0 if OK, else a negative error code. + * Return: 0 if OK, else a negative error code. */ int tegra_ivc_init(struct tegra_ivc *ivc, ulong rx_base, ulong tx_base, uint32_t nframes, uint32_t frame_size, diff --git a/arch/arm/include/asm/arch-tegra/sys_proto.h b/arch/arm/include/asm/arch-tegra/sys_proto.h index 62e1c7bcd1..c3a2673e6c 100644 --- a/arch/arm/include/asm/arch-tegra/sys_proto.h +++ b/arch/arm/include/asm/arch-tegra/sys_proto.h @@ -12,7 +12,7 @@ void invalidate_dcache(void); /** * tegra_board_id() - Get the board iD * - * @return a board ID, or -ve on error + * Return: a board ID, or -ve on error */ int tegra_board_id(void);

@@ -20,14 +20,14 @@ int tegra_board_id(void); * tegra_lcd_pmic_init() - Set up the PMIC for a board * * @board_id: Board ID which may be used to select LCD type - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int tegra_lcd_pmic_init(int board_id);

/** * nvidia_board_init() - perform any board-specific init * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int nvidia_board_init(void);

diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h index e57b9ef9c4..c49f43251d 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h @@ -150,7 +150,7 @@ struct i2c_ctlr { /** * Returns the bus number of the DVC controller * - * @return number of bus, or -1 if there is no DVC active + * Return: number of bus, or -1 if there is no DVC active */ int tegra_i2c_get_dvc_bus(struct udevice **busp);

diff --git a/arch/arm/include/asm/arch-tegra/warmboot.h b/arch/arm/include/asm/arch-tegra/warmboot.h index 3f02073ee4..bfde4c30ac 100644 --- a/arch/arm/include/asm/arch-tegra/warmboot.h +++ b/arch/arm/include/asm/arch-tegra/warmboot.h @@ -121,7 +121,7 @@ union scratch3_reg { /** * Save warmboot memory settings for a later resume * - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int warmboot_save_sdram_params(void);

diff --git a/arch/arm/include/asm/arch-tegra124/display.h b/arch/arm/include/asm/arch-tegra124/display.h index 47e0056dd6..ca3d57579e 100644 --- a/arch/arm/include/asm/arch-tegra124/display.h +++ b/arch/arm/include/asm/arch-tegra124/display.h @@ -16,14 +16,14 @@ * * @param blob Device tree blob * @param default_lcd_base Default address of LCD frame buffer - * @return 0 if ok, -1 on error (unsupported bits per pixel) + * Return: 0 if ok, -1 on error (unsupported bits per pixel) */ int tegra_display_probe(const void *blob, void *default_lcd_base);

/** * Return the current display configuration * - * @return pointer to display configuration, or NULL if there is no valid + * Return: pointer to display configuration, or NULL if there is no valid * config */ struct fdt_disp_config *tegra_display_get_config(void); diff --git a/arch/arm/include/asm/arch-tegra20/emc.h b/arch/arm/include/asm/arch-tegra20/emc.h index 58ee08c9fe..65d0e34f41 100644 --- a/arch/arm/include/asm/arch-tegra20/emc.h +++ b/arch/arm/include/asm/arch-tegra20/emc.h @@ -81,7 +81,7 @@ struct emc_ctlr { * * @param blob Device tree blob * @param rate Clock speed of memory controller in Hz (=2x memory bus rate) - * @return 0 if ok, else -ve error code (look in emc.c to decode it) + * Return: 0 if ok, else -ve error code (look in emc.c to decode it) */ int tegra_set_emc(const void *blob, unsigned rate);

@@ -89,7 +89,7 @@ int tegra_set_emc(const void *blob, unsigned rate); * Get a pointer to the EMC controller from the device tree. * * @param blob Device tree blob - * @return pointer to EMC controller + * Return: pointer to EMC controller */ struct emc_ctlr *emc_get_controller(const void *blob);

diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 4084210021..590a93761c 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -43,7 +43,7 @@ extern const struct gpio_bank *const omap_gpio_bank; * Check if gpio is valid. * * @param gpio GPIO number - * @return 1 if ok, 0 on error + * Return: 1 if ok, 0 on error */ int gpio_is_valid(int gpio); #endif diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h index e45c1bf010..eb3da93cc2 100644 --- a/arch/arm/mach-bcm283x/include/mach/msg.h +++ b/arch/arm/mach-bcm283x/include/mach/msg.h @@ -10,7 +10,7 @@ * bcm2835_power_on_module() - power on an SoC module * * @module: ID of module to power on (BCM2835_MBOX_POWER_DEVID_...) - * @return 0 if OK, -EIO on error + * Return: 0 if OK, -EIO on error */ int bcm2835_power_on_module(u32 module);

@@ -18,7 +18,7 @@ int bcm2835_power_on_module(u32 module); * bcm2835_get_mmc_clock() - get the frequency of the MMC clock * * @clock_id: ID of clock to get frequency for - * @return clock frequency, or -ve on error + * Return: clock frequency, or -ve on error */ int bcm2835_get_mmc_clock(u32 clock_id);

@@ -27,7 +27,7 @@ int bcm2835_get_mmc_clock(u32 clock_id); * * @widthp: Returns the width in pixels * @heightp: Returns the height in pixels - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int bcm2835_get_video_size(int *widthp, int *heightp);

@@ -42,7 +42,7 @@ int bcm2835_get_video_size(int *widthp, int *heightp); * @fb_basep: Returns base address of frame buffer * @fb_sizep: Returns size of frame buffer * @pitchp: Returns number of bytes in each frame buffer line - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp, int pixel_order, int alpha_mode, ulong *fb_basep, @@ -51,7 +51,7 @@ int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp, /** * bcm2711_load_vl805_firmware() - get vl805's firmware loaded * - * @return 0 if OK, -EIO on error + * Return: 0 if OK, -EIO on error */ int bcm2711_notify_vl805_reset(void);

diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 99bca549b6..f91f2ee862 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -1403,7 +1403,7 @@ int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, * @param target_freq Desired clock frequency in Hz * @param best_fine_scalar Pointer to store the fine stage divisor * - * @return best_main_scalar Main scalar for desired frequency or -1 if none + * Return: best_main_scalar Main scalar for desired frequency or -1 if none * found */ static int clock_calc_best_scalar(unsigned int main_scaler_bits, diff --git a/arch/arm/mach-exynos/clock_init.h b/arch/arm/mach-exynos/clock_init.h index a4d3fdae85..8664f10df4 100644 --- a/arch/arm/mach-exynos/clock_init.h +++ b/arch/arm/mach-exynos/clock_init.h @@ -141,7 +141,7 @@ struct mem_timings { * * This function can be called from SPL or the main U-Boot. * - * @return pointer to the memory timings that we should use + * Return: pointer to the memory timings that we should use */ struct mem_timings *clock_get_mem_timings(void);

diff --git a/arch/arm/mach-exynos/common_setup.h b/arch/arm/mach-exynos/common_setup.h index 4e3702b928..d7f02231fd 100644 --- a/arch/arm/mach-exynos/common_setup.h +++ b/arch/arm/mach-exynos/common_setup.h @@ -40,7 +40,7 @@ void system_clock_init(void); /* * Init subsystems according to the reset status * - * @return 0 for a normal boot, non-zero for a resume + * Return: 0 for a normal boot, non-zero for a resume */ int do_lowlevel_init(void);

diff --git a/arch/arm/mach-exynos/dmc_init_ddr3.c b/arch/arm/mach-exynos/dmc_init_ddr3.c index 18c558f92a..fa867f27f3 100644 --- a/arch/arm/mach-exynos/dmc_init_ddr3.c +++ b/arch/arm/mach-exynos/dmc_init_ddr3.c @@ -253,7 +253,7 @@ static const unsigned int test_pattern[] = { * @param ch DMC channel number * @param byte_lane which DQS byte offset, * possible values are 0,1,2,3 - * @return TRUE if memory was good, FALSE if not. + * Return: TRUE if memory was good, FALSE if not. */ static bool dmc_valid_window_test_vector(int ch, int byte_lane) { @@ -323,7 +323,7 @@ static void dmc_set_read_offset_value(struct exynos5420_phy_control *phy_ctrl, * representations of 0. * * @param b The byte to convert in two's complement. - * @return The 7-bit value + sign bit. + * Return: The 7-bit value + sign bit. */

unsigned char make_signed_byte(signed char b) diff --git a/arch/arm/mach-exynos/exynos5_setup.h b/arch/arm/mach-exynos/exynos5_setup.h index bf4cca9e19..af7a5afb03 100644 --- a/arch/arm/mach-exynos/exynos5_setup.h +++ b/arch/arm/mach-exynos/exynos5_setup.h @@ -898,7 +898,7 @@ enum { * * @param mem Memory timings for this memory type. * @param reset Reset DDR PHY during initialization. - * @return 0 if ok, SETUP_ERR_... if there is a problem + * Return: 0 if ok, SETUP_ERR_... if there is a problem */ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset);

@@ -913,7 +913,7 @@ void lpddr3_mem_ctrl_init(void); * @param phy1_con16 Register address for dmc_phy1->phy_con16 * @param phy0_con17 Register address for dmc_phy0->phy_con17 * @param phy1_con17 Register address for dmc_phy1->phy_con17 - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16, uint32_t *phy1_con16, uint32_t *phy0_con17, diff --git a/arch/arm/mach-exynos/include/mach/clk.h b/arch/arm/mach-exynos/include/mach/clk.h index 298535dc86..cf8db2109c 100644 --- a/arch/arm/mach-exynos/include/mach/clk.h +++ b/arch/arm/mach-exynos/include/mach/clk.h @@ -55,7 +55,7 @@ int set_spi_clk(int periph_id, unsigned int rate); * * @param peripheral Peripheral id * - * @return frequency of the peripheral clk + * Return: frequency of the peripheral clk */ unsigned long clock_get_periph_rate(int peripheral);

diff --git a/arch/arm/mach-exynos/include/mach/pinmux.h b/arch/arm/mach-exynos/include/mach/pinmux.h index bd1ad5f1a1..5ef04e711e 100644 --- a/arch/arm/mach-exynos/include/mach/pinmux.h +++ b/arch/arm/mach-exynos/include/mach/pinmux.h @@ -37,7 +37,7 @@ enum { * * @param peripheral peripheral to be configured * @param flags configure flags - * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + * Return: 0 if ok, -1 on error (e.g. unsupported peripheral) */ int exynos_pinmux_config(int peripheral, int flags);

@@ -46,7 +46,7 @@ int exynos_pinmux_config(int peripheral, int flags); * * @param blob Device tree blob * @param node FDT I2C node to find - * @return peripheral id if ok, PERIPH_ID_NONE on error + * Return: peripheral id if ok, PERIPH_ID_NONE on error */ int pinmux_decode_periph_id(const void *blob, int node); #endif diff --git a/arch/arm/mach-exynos/include/mach/spl.h b/arch/arm/mach-exynos/include/mach/spl.h index 9d642461bd..816c85217e 100644 --- a/arch/arm/mach-exynos/include/mach/spl.h +++ b/arch/arm/mach-exynos/include/mach/spl.h @@ -62,7 +62,7 @@ struct spl_machine_param { * Validate signature and return a pointer to the parameter table. If the * signature is invalid, call panic() and never return. * - * @return pointer to the parameter table if signature matched or never return. + * Return: pointer to the parameter table if signature matched or never return. */ struct spl_machine_param *spl_get_machine_params(void);

diff --git a/arch/arm/mach-imx/ddrmc-vf610-calibration.h b/arch/arm/mach-imx/ddrmc-vf610-calibration.h index e82e217ab3..56fffe1534 100644 --- a/arch/arm/mach-imx/ddrmc-vf610-calibration.h +++ b/arch/arm/mach-imx/ddrmc-vf610-calibration.h @@ -38,7 +38,7 @@ enum edge { * * @param ddrmr_regs - memory controller registers * - * @return 0 on success, otherwise error code + * Return: 0 on success, otherwise error code */ int ddrmc_calibration(struct ddrmr_regs *ddrmr);

diff --git a/arch/arm/mach-s5pc1xx/include/mach/pinmux.h b/arch/arm/mach-s5pc1xx/include/mach/pinmux.h index 075cdce3c1..9447a4950b 100644 --- a/arch/arm/mach-s5pc1xx/include/mach/pinmux.h +++ b/arch/arm/mach-s5pc1xx/include/mach/pinmux.h @@ -34,7 +34,7 @@ enum { * * @param peripheral peripheral to be configured * @param flags configure flags - * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + * Return: 0 if ok, -1 on error (e.g. unsupported peripheral) */ int exynos_pinmux_config(int peripheral, int flags);

@@ -43,7 +43,7 @@ int exynos_pinmux_config(int peripheral, int flags); * * @param blob Device tree blob * @param node FDT I2C node to find - * @return peripheral id if ok, PERIPH_ID_NONE on error + * Return: peripheral id if ok, PERIPH_ID_NONE on error */ int pinmux_decode_periph_id(const void *blob, int node); #endif diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c index 7de62668fe..2932eae757 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c @@ -366,7 +366,7 @@ static u8 stm32prog_start(struct stm32prog_data *data, u32 address) * get_address() - Get address if it is valid * * @tmp_xor: Current xor value to update - * @return The address area + * Return: The address area */ static u32 get_address(u8 *tmp_xor) { @@ -791,7 +791,7 @@ error: * stm32prog_serial_loop() - USART bootloader Loop routine * * @data: Current command context - * @return true if reset is needed after loop + * Return: true if reset is needed after loop */ bool stm32prog_serial_loop(struct stm32prog_data *data) { diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 18c19dbf60..77c8ad978e 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -243,7 +243,7 @@ void clock_ll_set_source(enum periph_id periph_id, unsigned source) * @param divider_bits number of divider bits (8 or 16) * @param parent_rate clock rate of parent clock in Hz * @param rate required clock rate for this clock - * @return divider which should be used + * Return: divider which should be used */ static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate, unsigned long rate) @@ -297,7 +297,7 @@ int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate) * * @param parent_rate clock rate of parent clock in Hz * @param divider which should be used in 7.1 format - * @return effective clock rate of peripheral + * Return: effective clock rate of peripheral */ static unsigned long get_rate_from_divider(unsigned long parent_rate, int divider) @@ -365,7 +365,7 @@ unsigned long clock_get_periph_rate(enum periph_id periph_id, * @param rate required clock rate for this clock * @param extra_div value for the second-stage divisor (not set if this * function returns -1. - * @return divider which should be used, or -1 if nothing is valid + * Return: divider which should be used, or -1 if nothing is valid * */ static int find_best_divider(unsigned divider_bits, unsigned long parent_rate, @@ -403,7 +403,7 @@ static int find_best_divider(unsigned divider_bits, unsigned long parent_rate, * @param source Source number (0-3 or 0-7) * @param mux_bits Number of mux bits (2 or 4) * @param divider Required divider in 7.1 or 15.1 format - * @return 0 if ok, -1 on error (requesting a parent clock which is not valid + * Return: 0 if ok, -1 on error (requesting a parent clock which is not valid * for this peripheral) */ static int adjust_periph_pll(enum periph_id periph_id, int source, @@ -586,7 +586,7 @@ unsigned clock_get_rate(enum clock_id clkid) * @param m PLL input divider(DIVN) * @param p post divider(DIVP) * @param cpcon base PLL charge pump(CPCON) - * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot + * Return: 0 if ok, -1 on error (the requested PLL is incorrect and cannot * be overridden), 1 if PLL is already correct */ int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon) diff --git a/arch/arm/mach-tegra/tegra114/clock.c b/arch/arm/mach-tegra/tegra114/clock.c index 167589d1bb..703a2314e7 100644 --- a/arch/arm/mach-tegra/tegra114/clock.c +++ b/arch/arm/mach-tegra/tegra114/clock.c @@ -553,7 +553,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) * @param source PLL id of required parent clock * @param mux_bits Set to number of bits in mux register: 2 or 4 * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) + * Return: mux value (0-4, or -1 if not found) */ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) @@ -623,7 +623,7 @@ void reset_set_enable(enum periph_id periph_id, int enable) * provided. * * @param clk_id Clock ID according to tegra114 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + * Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ enum periph_id clk_id_to_periph_id(int clk_id) { diff --git a/arch/arm/mach-tegra/tegra124/clock.c b/arch/arm/mach-tegra/tegra124/clock.c index 79e67f5194..bbfe184652 100644 --- a/arch/arm/mach-tegra/tegra124/clock.c +++ b/arch/arm/mach-tegra/tegra124/clock.c @@ -699,7 +699,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) * @param source PLL id of required parent clock * @param mux_bits Set to number of bits in mux register: 2 or 4 * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) + * Return: mux value (0-4, or -1 if not found) */ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) @@ -773,7 +773,7 @@ void reset_set_enable(enum periph_id periph_id, int enable) * provided. * * @param clk_id Clock ID according to tegra124 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + * Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ enum periph_id clk_id_to_periph_id(int clk_id) { @@ -899,7 +899,7 @@ void clock_early_init(void) * Check a register that we set up to see if clock_early_init() has already * been called. * - * @return true if clock_early_init() was called, false if not + * Return: true if clock_early_init() was called, false if not */ bool clock_early_init_done(void) { diff --git a/arch/arm/mach-tegra/tegra20/clock.c b/arch/arm/mach-tegra/tegra20/clock.c index 24e8a13b1f..3b50a81194 100644 --- a/arch/arm/mach-tegra/tegra20/clock.c +++ b/arch/arm/mach-tegra/tegra20/clock.c @@ -476,7 +476,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) * @param source PLL id of required parent clock * @param mux_bits Set to number of bits in mux register: 2 or 4 * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) + * Return: mux value (0-4, or -1 if not found) */ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) @@ -548,7 +548,7 @@ void reset_set_enable(enum periph_id periph_id, int enable) * provided. * * @param clk_id Clock ID according to tegra20 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + * Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ enum periph_id clk_id_to_periph_id(int clk_id) { diff --git a/arch/arm/mach-tegra/tegra20/emc.c b/arch/arm/mach-tegra/tegra20/emc.c index d55b09b4ac..fb5e699c94 100644 --- a/arch/arm/mach-tegra/tegra20/emc.c +++ b/arch/arm/mach-tegra/tegra20/emc.c @@ -113,7 +113,7 @@ enum { * @param blob Device tree blob * @param node EMC node (nvidia,tegra20-emc compatible string) * @param ram_code RAM code to select (0-3, or -1 if unknown) - * @return 0 if ok, otherwise a -ve ERR_ code (see enum above) + * Return: 0 if ok, otherwise a -ve ERR_ code (see enum above) */ static int find_emc_tables(const void *blob, int node, int ram_code) { @@ -167,7 +167,7 @@ static int find_emc_tables(const void *blob, int node, int ram_code) * @param tablep Returns pointer to table to program into EMC. There are * TEGRA_EMC_NUM_REGS entries, destined for offsets as per the * emc_reg_addr array. - * @return 0 if ok, otherwise a -ve error code which will allow someone to + * Return: 0 if ok, otherwise a -ve error code which will allow someone to * figure out roughly what went wrong by looking at this code. */ static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp, diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c index ccc64eb77b..10c2478df7 100644 --- a/arch/arm/mach-tegra/tegra210/clock.c +++ b/arch/arm/mach-tegra/tegra210/clock.c @@ -791,7 +791,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) * @param source PLL id of required parent clock * @param mux_bits Set to number of bits in mux register: 2 or 4 * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) + * Return: mux value (0-4, or -1 if not found) */ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) @@ -871,7 +871,7 @@ void reset_set_enable(enum periph_id periph_id, int enable) * provided. * * @param clk_id Clock ID according to tegra210 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + * Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ enum periph_id clk_id_to_periph_id(int clk_id) { diff --git a/arch/arm/mach-tegra/tegra30/clock.c b/arch/arm/mach-tegra/tegra30/clock.c index b0641c6a41..c835cd0d47 100644 --- a/arch/arm/mach-tegra/tegra30/clock.c +++ b/arch/arm/mach-tegra/tegra30/clock.c @@ -533,7 +533,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) * @param source PLL id of required parent clock * @param mux_bits Set to number of bits in mux register: 2 or 4 * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) + * Return: mux value (0-4, or -1 if not found) */ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) @@ -603,7 +603,7 @@ void reset_set_enable(enum periph_id periph_id, int enable) * provided. * * @param clk_id Clock ID according to tegra30 device tree binding - * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid + * Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ enum periph_id clk_id_to_periph_id(int clk_id) { diff --git a/arch/microblaze/include/asm/microblaze_intc.h b/arch/microblaze/include/asm/microblaze_intc.h index 1434be8756..a7e8715851 100644 --- a/arch/microblaze/include/asm/microblaze_intc.h +++ b/arch/microblaze/include/asm/microblaze_intc.h @@ -30,7 +30,7 @@ struct irq_action { * @param irq IRQ number * @param hdlr Interrupt handler rutine * @param arg Pointer to argument which is passed to int. handler rutine - * @return 0 if registration pass, 1 if unregistration pass, + * Return: 0 if registration pass, 1 if unregistration pass, * or an error code < 0 otherwise */ int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, diff --git a/arch/mips/mach-octeon/bootoctlinux.c b/arch/mips/mach-octeon/bootoctlinux.c index 349da08da6..2c583b8b83 100644 --- a/arch/mips/mach-octeon/bootoctlinux.c +++ b/arch/mips/mach-octeon/bootoctlinux.c @@ -154,7 +154,7 @@ static struct cvmx_bootinfo cvmx_bootinfo_array[CVMX_MIPS_MAX_CORES]; * 16 dwords. * @param num_words Number of data dwords (up to 32) * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ static int octeon_set_moveable_region(u32 base, int region_num, bool enable, const u64 *data, @@ -219,7 +219,7 @@ static int octeon_set_moveable_region(u32 base, int region_num, * @param[in] str string to parse * @param base 0 for auto, otherwise 8, 10 or 16 for the number base * - * @return number of values read. + * Return: number of values read. */ static int octeon_parse_nodes(u64 values[CVMX_MAX_NODES], const char *str, int base) @@ -246,7 +246,7 @@ static int octeon_parse_nodes(u64 values[CVMX_MAX_NODES], * @param cmd command type * @param[out] boot_args parsed values * - * @return number of arguments parsed + * Return: number of arguments parsed */ int octeon_parse_bootopts(int argc, char *const argv[], enum octeon_boot_cmd_type cmd, diff --git a/arch/mips/mach-octeon/cpu.c b/arch/mips/mach-octeon/cpu.c index f56beb8964..6cfcc3eae0 100644 --- a/arch/mips/mach-octeon/cpu.c +++ b/arch/mips/mach-octeon/cpu.c @@ -89,7 +89,7 @@ int mach_cpu_init(void) /** * Returns number of cores * - * @return number of CPU cores for the specified node + * Return: number of CPU cores for the specified node */ static int cavm_octeon_num_cores(void) { diff --git a/arch/mips/mach-octeon/cvmx-bootmem.c b/arch/mips/mach-octeon/cvmx-bootmem.c index 12695df9bc..9bd644d68b 100644 --- a/arch/mips/mach-octeon/cvmx-bootmem.c +++ b/arch/mips/mach-octeon/cvmx-bootmem.c @@ -107,7 +107,7 @@ static u64 cvmx_bootmem_desc_addr; * accessed. * @param size Size of the structure member. * - * @return Value of the structure member promoted into a u64. + * Return: Value of the structure member promoted into a u64. */ static inline u64 __cvmx_bootmem_desc_get(u64 base, int offset, int size) @@ -153,7 +153,7 @@ static inline void __cvmx_bootmem_desc_set(u64 base, int offset, int size, /** * This function returns the address of the bootmem descriptor lock. * - * @return 64-bit address in KSEG0 of the bootmem descriptor block + * Return: 64-bit address in KSEG0 of the bootmem descriptor block */ static inline u64 __cvmx_bootmem_get_lock_addr(void) { @@ -275,7 +275,7 @@ static u64 cvmx_bootmem_phy_get_next(u64 addr) * Exact major version to check against. A zero means * check that the version supports named blocks. * - * @return Zero if the version is correct. Negative if the version is + * Return: Zero if the version is correct. Negative if the version is * incorrect. Failures also cause a message to be displayed. */ static int __cvmx_bootmem_check_version(int exact_match) @@ -525,7 +525,7 @@ int cvmx_bootmem_free_named(const char *name) * * @param name is the block name * @param flags indicates the need to use locking during search - * @return pointer to named block descriptor + * Return: pointer to named block descriptor * * Note: this function returns a pointer to a static structure, * and is therefore not re-entrant. diff --git a/arch/mips/mach-octeon/cvmx-coremask.c b/arch/mips/mach-octeon/cvmx-coremask.c index ed673e4993..c3d6f7e0d1 100644 --- a/arch/mips/mach-octeon/cvmx-coremask.c +++ b/arch/mips/mach-octeon/cvmx-coremask.c @@ -96,7 +96,7 @@ static int convert_ciu_fuse_to_physical_core(int core, int max_cores) * @param num_tads number of tads * @param max_cores maximum number of cores * - * @return void + * Return: void */ void fill_tad_corecount(u64 coremask, int tad_blown_count[], int num_tads, int max_cores) @@ -132,7 +132,7 @@ u64 get_core_pattern(int num_tads, int max_cores) * CIU_FUSE register value. For other models there is no difference. * * @param ciu_fuse_value fuse value from CIU_FUSE register - * @return logical coremask of CIU_FUSE value. + * Return: logical coremask of CIU_FUSE value. */ u64 get_logical_coremask(u64 ciu_fuse_value) { @@ -173,7 +173,7 @@ u64 get_logical_coremask(u64 ciu_fuse_value) * If the fuses are blown and locked, they are the definitive coremask. * * @param pcm pointer to coremask to fill in - * @return pointer to coremask + * Return: pointer to coremask */ struct cvmx_coremask *octeon_get_available_coremask(struct cvmx_coremask *pcm) { diff --git a/arch/mips/mach-octeon/cvmx-helper-cfg.c b/arch/mips/mach-octeon/cvmx-helper-cfg.c index 6b7dd8ac4d..494108f0cd 100644 --- a/arch/mips/mach-octeon/cvmx-helper-cfg.c +++ b/arch/mips/mach-octeon/cvmx-helper-cfg.c @@ -206,7 +206,7 @@ uint64_t cvmx_helper_cfg_opt_get(cvmx_helper_cfg_option_t opt) * initialize the queue allocation list. the existing static allocation result * is used as a starting point to ensure backward compatibility. * - * @return 0 on success + * Return: 0 on success * -1 on failure */ int cvmx_pko_queue_grp_alloc(u64 start, uint64_t end, uint64_t count) @@ -333,7 +333,7 @@ int init_cvmx_pko_que_range(void) * @param port the port for which the queues are requested * @param count the number of queues requested * - * @return 0 on success + * Return: 0 on success * -1 on failure */ static int cvmx_pko_queue_alloc(u64 port, int count) @@ -381,7 +381,7 @@ static int cvmx_pko_queue_alloc(u64 port, int count) * * @param port the port for which the queues are returned * - * @return 0 on success + * Return: 0 on success * -1 on failure */ int cvmx_pko_queue_free(uint64_t port) @@ -730,7 +730,7 @@ int cvmx_helper_cfg_ipd2pko_port_num(int ipd_port) * Return the number of queues to be assigned to this pko_port * * @param pko_port - * @return the number of queues for this pko_port + * Return: the number of queues for this pko_port * */ static int cvmx_helper_cfg_dft_nqueues(int pko_port) @@ -815,7 +815,7 @@ static int cvmx_helper_cfg_init_pko_iports_and_queues_using_static_config(void) * @param xiface interface to check * @param index port index in the interface * - * @return status of the port present or not. + * Return: status of the port present or not. */ int cvmx_helper_is_port_valid(int xiface, int index) { @@ -1325,7 +1325,7 @@ void cvmx_helper_set_port_fdt_node_offset(int xiface, int index, int node_offset * * @param xiface node and interface * @param index port index - * @return node offset of port or -1 if invalid + * Return: node offset of port or -1 if invalid */ int cvmx_helper_get_port_fdt_node_offset(int xiface, int index) { @@ -1343,7 +1343,7 @@ int cvmx_helper_get_port_fdt_node_offset(int xiface, int index) * @param[out] xiface xinterface of match * @param[out] index port index of match * - * @return 0 if found, -1 if not found + * Return: 0 if found, -1 if not found */ int cvmx_helper_cfg_get_xiface_index_by_fdt_node_offset(int of_offset, int *xiface, int *index) { @@ -1392,7 +1392,7 @@ void cvmx_helper_set_phy_fdt_node_offset(int xiface, int index, int node_offset) * * @param xiface node and interface * @param index port index - * @return node offset of phy or -1 if invalid + * Return: node offset of phy or -1 if invalid */ int cvmx_helper_get_phy_fdt_node_offset(int xiface, int index) { @@ -1428,7 +1428,7 @@ void cvmx_helper_set_port_autonegotiation(int xiface, int index, bool enable) * @param xiface node and interface * @param index port index * - * @return 0 if autonegotiation is disabled, 1 if enabled. + * Return: 0 if autonegotiation is disabled, 1 if enabled. */ bool cvmx_helper_get_port_autonegotiation(int xiface, int index) { @@ -1463,7 +1463,7 @@ void cvmx_helper_set_port_fec(int xiface, int index, bool enable) * @param xiface node and interface * @param index port index * - * @return false if fec is disabled, true if enabled. + * Return: false if fec is disabled, true if enabled. */ bool cvmx_helper_get_port_fec(int xiface, int index) { @@ -1653,7 +1653,7 @@ void cvmx_helper_set_port_phy_info(int xiface, int index, struct cvmx_phy_info * * @param xiface node and interface * @param index port index * - * @return pointer to PHY information data structure or NULL if not set + * Return: pointer to PHY information data structure or NULL if not set */ struct cvmx_phy_info *cvmx_helper_get_port_phy_info(int xiface, int index) { @@ -1671,7 +1671,7 @@ struct cvmx_phy_info *cvmx_helper_get_port_phy_info(int xiface, int index) * @param xiface node and interface * @param index portindex * - * @return pointer to the PHY LED information data structure or NULL if not + * Return: pointer to the PHY LED information data structure or NULL if not * present */ struct cvmx_phy_gpio_leds *cvmx_helper_get_port_phy_leds(int xiface, int index) @@ -1750,7 +1750,7 @@ void cvmx_helper_cfg_get_rgmii_tx_clk_delay(int xiface, int index, bool *bypass, * @param xiface node and interface * @param index port index * - * @return offset in device tree or -1 if error or not defined. + * Return: offset in device tree or -1 if error or not defined. */ int cvmx_helper_cfg_get_sfp_fdt_offset(int xiface, int index) { @@ -1785,7 +1785,7 @@ void cvmx_helper_cfg_set_sfp_fdt_offset(int xiface, int index, int sfp_of_offset * @param xiface node and interface * @param index port index * - * @return pointer to vsc7224 data structure or NULL if not present + * Return: pointer to vsc7224 data structure or NULL if not present */ struct cvmx_vsc7224_chan *cvmx_helper_cfg_get_vsc7224_chan_info(int xiface, int index) { @@ -1820,7 +1820,7 @@ void cvmx_helper_cfg_set_vsc7224_chan_info(int xiface, int index, * @param xiface node and interface * @param index port index * - * @return pointer to avsp5410 data structure or NULL if not present + * Return: pointer to avsp5410 data structure or NULL if not present */ struct cvmx_avsp5410 *cvmx_helper_cfg_get_avsp5410_info(int xiface, int index) { @@ -1853,7 +1853,7 @@ void cvmx_helper_cfg_set_avsp5410_info(int xiface, int index, struct cvmx_avsp54 * @param xiface node and interface * @param index port index * - * @return pointer to SFP data structure or NULL if none + * Return: pointer to SFP data structure or NULL if none */ struct cvmx_fdt_sfp_info *cvmx_helper_cfg_get_sfp_info(int xiface, int index) { diff --git a/arch/mips/mach-octeon/cvmx-helper-fdt.c b/arch/mips/mach-octeon/cvmx-helper-fdt.c index 87bc6d2adc..3177dfb6e5 100644 --- a/arch/mips/mach-octeon/cvmx-helper-fdt.c +++ b/arch/mips/mach-octeon/cvmx-helper-fdt.c @@ -54,7 +54,7 @@ struct mux_compat { * * @param size number of bytes to allocate * - * @return pointer to allocated memory or NULL if out of memory. + * Return: pointer to allocated memory or NULL if out of memory. * Alignment is set to 8-bytes. */ void *__cvmx_fdt_alloc(size_t size) @@ -85,7 +85,7 @@ void __cvmx_fdt_free(void *ptr, size_t size) * @param[in,out] lenp Number of phandles, input max number * @param[out] nodes Array of phandle nodes * - * @return -ve error code on error or 0 for success + * Return: -ve error code on error or 0 for success */ int cvmx_fdt_lookup_phandles(const void *fdt_addr, int node, const char *prop_name, int *lenp, @@ -116,7 +116,7 @@ int cvmx_fdt_lookup_phandles(const void *fdt_addr, int node, * @param[in] fdt_addr Address of FDT * @param node FDT node number * - * @return CPU node number or error if negative + * Return: CPU node number or error if negative */ int cvmx_fdt_get_cpu_node(const void *fdt_addr, int node) { @@ -147,7 +147,7 @@ int cvmx_fdt_get_cpu_node(const void *fdt_addr, int node) * * @param[in] fdt_addr Address of FDT * - * @return Size of flat device tree in bytes or error if negative. + * Return: Size of flat device tree in bytes or error if negative. */ int cvmx_fdt_get_fdt_size(const void *fdt_addr) { @@ -167,7 +167,7 @@ int cvmx_fdt_get_fdt_size(const void *fdt_addr) * @param[in] strlist Array of FDT device compatibility strings, * must end with NULL or empty string. * - * @return 0 if at least one item matches, 1 if no matches + * Return: 0 if at least one item matches, 1 if no matches */ int cvmx_fdt_node_check_compatible_list(const void *fdt_addr, int node, const char *const *strlist) { @@ -187,7 +187,7 @@ int cvmx_fdt_node_check_compatible_list(const void *fdt_addr, int node, const ch * @param strlist Array of FDT device compatibility strings, must * end with NULL or empty string. * - * @return next matching node or -1 if no more matches. + * Return: next matching node or -1 if no more matches. */ int cvmx_fdt_node_offset_by_compatible_list(const void *fdt_addr, int startoffset, const char *const *strlist) @@ -221,7 +221,7 @@ void cvmx_sfp_attach_phy(struct cvmx_fdt_sfp_info *sfp, struct cvmx_phy_info *ph * @param sfp Handle to SFP data structure * @param ipd_port Port to assign it to * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int cvmx_sfp_set_ipd_port(struct cvmx_fdt_sfp_info *sfp, int ipd_port) { @@ -269,7 +269,7 @@ int cvmx_sfp_set_ipd_port(struct cvmx_fdt_sfp_info *sfp, int ipd_port) * @param of_offset Offset of vsc7224 node * @param[in,out] vsc7224 Data structure to hold the data * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ static int cvmx_fdt_parse_vsc7224_channels(const void *fdt_addr, int of_offset, struct cvmx_vsc7224 *vsc7224) @@ -437,7 +437,7 @@ static int cvmx_fdt_parse_vsc7224_channels(const void *fdt_addr, int of_offset, * * @param[in] fdt_addr Address of flat device tree * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ int __cvmx_fdt_parse_vsc7224(const void *fdt_addr) { @@ -530,7 +530,7 @@ int __cvmx_fdt_parse_vsc7224(const void *fdt_addr) * * @param[in] fdt_addr Address of flat device tree * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ int __cvmx_fdt_parse_avsp5410(const void *fdt_addr) { @@ -665,7 +665,7 @@ int __cvmx_fdt_parse_avsp5410(const void *fdt_addr) * @param of_offset Offset of QSFP node * @param[out] sfp_info Pointer to sfp info to fill in * - * @return 0 for success + * Return: 0 for success */ static int cvmx_parse_qsfp(const void *fdt_addr, int of_offset, struct cvmx_fdt_sfp_info *sfp_info) { @@ -684,7 +684,7 @@ static int cvmx_parse_qsfp(const void *fdt_addr, int of_offset, struct cvmx_fdt_ * @param of_offset Offset of SFP node * @param[out] sfp_info Pointer to sfp info to fill in * - * @return 0 for success + * Return: 0 for success */ static int cvmx_parse_sfp(const void *fdt_addr, int of_offset, struct cvmx_fdt_sfp_info *sfp_info) { @@ -702,7 +702,7 @@ static int cvmx_parse_sfp(const void *fdt_addr, int of_offset, struct cvmx_fdt_s * @param of_offset Offset of SFP node * @param[out] sfp_info Pointer to sfp info to fill in * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ static int cvmx_parse_sfp_eeprom(const void *fdt_addr, int of_offset, struct cvmx_fdt_sfp_info *sfp_info) @@ -741,7 +741,7 @@ static int cvmx_parse_sfp_eeprom(const void *fdt_addr, int of_offset, * * @param[in] fdt_addr Address of flat device tree * - * @return pointer to sfp info or NULL if error + * Return: pointer to sfp info or NULL if error */ struct cvmx_fdt_sfp_info *cvmx_helper_fdt_parse_sfp_info(const void *fdt_addr, int of_offset) { @@ -806,7 +806,7 @@ error_exit: * @param of_offset fdt offset of slice * @param phy_info phy_info data structure * - * @return slice number if non-negative, otherwise error + * Return: slice number if non-negative, otherwise error */ static int cvmx_fdt_parse_cs4343_slice(const void *fdt_addr, int of_offset, struct cvmx_phy_info *phy_info) @@ -905,7 +905,7 @@ static int cvmx_fdt_parse_cs4343_slice(const void *fdt_addr, int of_offset, * @param of_offset offset of slice or phy in device tree * @param phy_info phy_info data structure to fill in * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int cvmx_fdt_parse_cs4343(const void *fdt_addr, int of_offset, struct cvmx_phy_info *phy_info) { diff --git a/arch/mips/mach-octeon/cvmx-helper-jtag.c b/arch/mips/mach-octeon/cvmx-helper-jtag.c index a6fa69b4c5..bb773ff8e6 100644 --- a/arch/mips/mach-octeon/cvmx-helper-jtag.c +++ b/arch/mips/mach-octeon/cvmx-helper-jtag.c @@ -71,7 +71,7 @@ void cvmx_helper_qlm_jtag_init(void) * @param data Data to shift in. Bit 0 enters the chain first, followed by * bit 1, etc. * - * @return The low order bits of the JTAG chain that shifted out of the + * Return: The low order bits of the JTAG chain that shifted out of the * circle. */ uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) diff --git a/arch/mips/mach-octeon/cvmx-helper-util.c b/arch/mips/mach-octeon/cvmx-helper-util.c index 4625b4591b..92298fd8d1 100644 --- a/arch/mips/mach-octeon/cvmx-helper-util.c +++ b/arch/mips/mach-octeon/cvmx-helper-util.c @@ -132,7 +132,7 @@ static const struct ipd_port_map ipd_port_map_75xx[CVMX_HELPER_MAX_IFACE] = { * * @param mode Mode to convert * - * @return String + * Return: String */ const char *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t mode) { @@ -729,7 +729,7 @@ void cvmx_helper_setup_legacy_red(int pass_thresh, int drop_thresh) * @param drop_thresh * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. - * @return Zero on success. Negative on failure + * Return: Zero on success. Negative on failure */ int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) { @@ -749,7 +749,7 @@ int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) * @param xiface Interface to configure * @param num_ports Number of ports on the interface * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_setup_gmx(int xiface, int num_ports) { @@ -984,7 +984,7 @@ int cvmx_helper_get_bpid(int interface, int port) * * @param port IPD/PKO port number * - * @return none + * Return: none */ void cvmx_helper_show_stats(int port) { @@ -1013,7 +1013,7 @@ void cvmx_helper_show_stats(int port) * * @param ipd_port IPD/PKO port number * - * @return Interface number + * Return: Interface number */ int cvmx_helper_get_interface_num(int ipd_port) { @@ -1096,7 +1096,7 @@ int cvmx_helper_get_interface_num(int ipd_port) * * @param ipd_port IPD/PKO port number * - * @return Interface index number + * Return: Interface index number */ int cvmx_helper_get_interface_index_num(int ipd_port) { diff --git a/arch/mips/mach-octeon/cvmx-helper.c b/arch/mips/mach-octeon/cvmx-helper.c index 529e03a147..d0620d6cda 100644 --- a/arch/mips/mach-octeon/cvmx-helper.c +++ b/arch/mips/mach-octeon/cvmx-helper.c @@ -512,7 +512,7 @@ cvmx_helper_link_info_t __cvmx_helper_get_link_info(int xiface, int port) * * @param xiface - interface to check * - * @return zero if FCS is not used, otherwise FCS is used. + * Return: zero if FCS is not used, otherwise FCS is used. */ int __cvmx_helper_get_has_fcs(int xiface) { @@ -562,7 +562,7 @@ void (*cvmx_override_ipd_port_setup)(int ipd_port) = NULL; * but the CNX0XX and CNX1XX are exceptions. These only support * one interface. * - * @return Number of interfaces on chip + * Return: Number of interfaces on chip */ int cvmx_helper_get_number_of_interfaces(void) { @@ -609,7 +609,7 @@ int __cvmx_helper_early_ports_on_interface(int interface) * * @param xiface xiface to get the port count for * - * @return Number of ports on interface. Can be Zero. + * Return: Number of ports on interface. Can be Zero. */ int cvmx_helper_ports_on_interface(int xiface) { @@ -1158,7 +1158,7 @@ static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface) * * @param xiface Interface to probe * - * @return Mode of the interface. Unknown or unsupported interfaces return + * Return: Mode of the interface. Unknown or unsupported interfaces return * DISABLED. */ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int xiface) @@ -1239,7 +1239,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int xiface) * * @param xiface Interface to enumerate * - * @return The number of ports on the interface, negative on failure + * Return: The number of ports on the interface, negative on failure */ int cvmx_helper_interface_enumerate(int xiface) { @@ -1262,7 +1262,7 @@ int cvmx_helper_interface_enumerate(int xiface) * * @param xiface Interface to probe * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_interface_probe(int xiface) { @@ -1365,7 +1365,7 @@ int cvmx_helper_interface_probe(int xiface) * @INTERNAL * Setup backpressure. * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ static int __cvmx_helper_global_setup_backpressure(int node) { @@ -1441,7 +1441,7 @@ static int __cvmx_helper_global_setup_backpressure(int node) /** * @INTERNAL * Verify the per port IPD backpressure is aligned properly. - * @return Zero if working, non zero if misaligned + * Return: Zero if working, non zero if misaligned */ int __cvmx_helper_backpressure_is_misaligned(void) { @@ -1458,7 +1458,7 @@ int __cvmx_helper_backpressure_is_misaligned(void) * * @param xiface Interface to enable * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_packet_hardware_enable(int xiface) { @@ -1480,7 +1480,7 @@ int cvmx_helper_ipd_and_packet_input_enable(void) * Called after all internal packet IO paths are setup. This * function enables IPD/PIP and begins packet input and output. * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_ipd_and_packet_input_enable_node(int node) { @@ -1526,7 +1526,7 @@ int cvmx_helper_ipd_and_packet_input_enable_node(int node) * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower * priority than the previous. * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_initialize_packet_io_node(unsigned int node) { @@ -1645,7 +1645,7 @@ int cvmx_helper_initialize_packet_io_node(unsigned int node) * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower * priority than the previous. * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_initialize_packet_io_global(void) { @@ -1657,7 +1657,7 @@ int cvmx_helper_initialize_packet_io_global(void) /** * Does core local initialization for packet io * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_initialize_packet_io_local(void) { @@ -1681,7 +1681,7 @@ struct cvmx_buffer_list { * 1 => disable backpressure * 0 => enable backpressure * - * @return 0 on success + * Return: 0 on success * -1 on error */ int cvmx_gmx_set_backpressure_override(u32 interface, uint32_t port_mask) @@ -1710,7 +1710,7 @@ int cvmx_gmx_set_backpressure_override(u32 interface, uint32_t port_mask) * 1 => disable backpressure * 0 => enable backpressure * - * @return 0 on success + * Return: 0 on success * -1 on error */ int cvmx_agl_set_backpressure_override(u32 interface, uint32_t port_mask) @@ -1852,7 +1852,7 @@ int cvmx_helper_shutdown_packet_io_global_cn78xx(int node) * buffers used by the packet IO hardware to the FPA so a function emptying the * FPA after shutdown should find all packet buffers in the FPA. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_helper_shutdown_packet_io_global(void) { @@ -2158,7 +2158,7 @@ int cvmx_helper_shutdown_packet_io_global(void) /** * Does core local shutdown of packet io * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_shutdown_packet_io_local(void) { @@ -2176,7 +2176,7 @@ int cvmx_helper_shutdown_packet_io_local(void) * * @param xipd_port IPD/PKO port to auto configure * - * @return Link state after configure + * Return: Link state after configure */ cvmx_helper_link_info_t cvmx_helper_link_autoconf(int xipd_port) { @@ -2215,7 +2215,7 @@ cvmx_helper_link_info_t cvmx_helper_link_autoconf(int xipd_port) * * @param xipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t cvmx_helper_link_get(int xipd_port) { @@ -2264,7 +2264,7 @@ cvmx_helper_link_info_t cvmx_helper_link_get(int xipd_port) * @param xipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_link_set(int xipd_port, cvmx_helper_link_info_t link_info) { @@ -2301,7 +2301,7 @@ int cvmx_helper_link_set(int xipd_port, cvmx_helper_link_info_t link_info) * @param enable_external * Non zero if you want external loopback * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_helper_configure_loopback(int xipd_port, int enable_internal, int enable_external) { diff --git a/arch/mips/mach-octeon/cvmx-pcie.c b/arch/mips/mach-octeon/cvmx-pcie.c index f42d44cbec..c2a2018a1f 100644 --- a/arch/mips/mach-octeon/cvmx-pcie.c +++ b/arch/mips/mach-octeon/cvmx-pcie.c @@ -84,7 +84,7 @@ static uint32_t __cvmx_pcie_config_read32(int node, int pcie_port, int bus, int * * @param pcie_port PCIe port the IO is for * - * @return 64bit Octeon IO base address for read/write + * Return: 64bit Octeon IO base address for read/write */ uint64_t cvmx_pcie_get_io_base_address(int pcie_port) { @@ -107,7 +107,7 @@ uint64_t cvmx_pcie_get_io_base_address(int pcie_port) * * @param pcie_port PCIe port the IO is for * - * @return Size of the IO window + * Return: Size of the IO window */ uint64_t cvmx_pcie_get_io_size(int pcie_port) { @@ -120,7 +120,7 @@ uint64_t cvmx_pcie_get_io_size(int pcie_port) * * @param pcie_port PCIe port the IO is for * - * @return 64bit Octeon IO base address for read/write + * Return: 64bit Octeon IO base address for read/write */ uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) { @@ -141,7 +141,7 @@ uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) * * @param pcie_port PCIe port the IO is for * - * @return Size of the Mem window + * Return: Size of the Mem window */ uint64_t cvmx_pcie_get_mem_size(int pcie_port) { @@ -154,7 +154,7 @@ uint64_t cvmx_pcie_get_mem_size(int pcie_port) * * @param pcie_port QLM number to return for. * - * @return QLM number. + * Return: QLM number. */ static int __cvmx_pcie_get_qlm(int node, int pcie_port) { @@ -751,7 +751,7 @@ static void __cvmx_pcie_gser_phy_config(int node, int pcie_port, int qlm) * @param node Node to query * @param pcie_port PEM to query * - * @return LTSSM state + * Return: LTSSM state */ static int __cvmx_pcie_rc_get_ltssm_state(int node, int pcie_port) { @@ -794,7 +794,7 @@ static int __cvmx_pcie_rc_get_ltssm_state(int node, int pcie_port) * @param node Node to query * @param pcie_port PEM to query * - * @return LTSSM state + * Return: LTSSM state */ static const char *cvmx_pcie_get_ltssm_string(int ltssm) { @@ -890,7 +890,7 @@ static const char *cvmx_pcie_get_ltssm_string(int ltssm) * @param func PCIe function on the device * @param reg Register to read * - * @return Config register value, or all ones on failure + * Return: Config register value, or all ones on failure */ static uint32_t cvmx_pcie_config_read32_retry(int node, int pcie_port, int bus, int dev, int func, int reg) @@ -928,7 +928,7 @@ static uint32_t cvmx_pcie_config_read32_retry(int node, int pcie_port, int bus, * @param node node * @param pcie_port PCIe port to initialize * - * @return Zero on success + * Return: Zero on success */ static int __cvmx_pcie_rc_initialize_link_gen2(int node, int pcie_port) { @@ -1185,7 +1185,7 @@ static void __cvmx_pcie_sli_config(int node, int pcie_port) * * @param pcie_port PCIe port to initialize * - * @return Zero on success + * Return: Zero on success */ static int __cvmx_pcie_rc_initialize_gen2(int pcie_port) { @@ -1393,7 +1393,7 @@ static int __cvmx_pcie_rc_initialize_gen2(int pcie_port) * @param node node * @param pcie_port PCIe port to initialize * - * @return Zero on success + * Return: Zero on success */ static int __cvmx_pcie_rc_initialize_link_gen2_v3(int node, int pcie_port) { @@ -2008,7 +2008,7 @@ static int __cvmx_pcie_rc_initialize_gen2_v3(int pcie_port) * * @param pcie_port PCIe port to initialize for a node * - * @return Zero on success + * Return: Zero on success */ int cvmx_pcie_rc_initialize(int pcie_port) { @@ -2029,7 +2029,7 @@ int cvmx_pcie_rc_initialize(int pcie_port) * * @param pcie_port PCIe port to shutdown for a node * - * @return Zero on success + * Return: Zero on success */ int cvmx_pcie_rc_shutdown(int pcie_port) { @@ -2076,7 +2076,7 @@ int cvmx_pcie_rc_shutdown(int pcie_port) * @param fn Device sub function * @param reg Register to access * - * @return 64bit Octeon IO address + * Return: 64bit Octeon IO address */ static uint64_t __cvmx_pcie_build_config_addr(int node, int port, int bus, int dev, int fn, int reg) { @@ -2117,7 +2117,7 @@ static uint64_t __cvmx_pcie_build_config_addr(int node, int port, int bus, int d * @param fn Device sub function * @param reg Register to access * - * @return Result of the read + * Return: Result of the read */ uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, int fn, int reg) { @@ -2141,7 +2141,7 @@ uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, int fn, int reg) * @param fn Device sub function * @param reg Register to access * - * @return Result of the read + * Return: Result of the read */ uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, int fn, int reg) { @@ -2183,7 +2183,7 @@ static uint32_t __cvmx_pcie_config_read32(int node, int pcie_port, int bus, int * @param fn Device sub function * @param reg Register to access * - * @return Result of the read + * Return: Result of the read */ uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, int fn, int reg) { @@ -2264,7 +2264,7 @@ void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, int reg, * @param pcie_port PCIe port to read from * @param cfg_offset Address to read * - * @return Value read + * Return: Value read */ uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) { @@ -2313,7 +2313,7 @@ extern int cvmx_pcie_is_host_mode(int pcie_port); * * @param pcie_port PCIe port to initialize for a node * - * @return Zero on success + * Return: Zero on success */ int cvmx_pcie_ep_initialize(int pcie_port) { @@ -2459,7 +2459,7 @@ void cvmx_pcie_wait_for_pending(int pcie_port) * * @param pcie_port PCIe port number (PEM number) * - * @return 0 if PCIe port is in target mode, !0 if in host mode. + * Return: 0 if PCIe port is in target mode, !0 if in host mode. */ int cvmx_pcie_is_host_mode(int pcie_port) { diff --git a/arch/mips/mach-octeon/cvmx-qlm.c b/arch/mips/mach-octeon/cvmx-qlm.c index 970e34aaff..01051788b8 100644 --- a/arch/mips/mach-octeon/cvmx-qlm.c +++ b/arch/mips/mach-octeon/cvmx-qlm.c @@ -64,7 +64,7 @@ static qlm_jtag_uint32_t *__cvmx_qlm_jtag_xor_ref; /** * Return the number of QLMs supported by the chip * - * @return Number of QLMs + * Return: Number of QLMs */ int cvmx_qlm_get_num(void) { @@ -92,7 +92,7 @@ int cvmx_qlm_get_num(void) * * @param xiface interface to look up * - * @return the qlm number based on the xiface + * Return: the qlm number based on the xiface */ int cvmx_qlm_interface(int xiface) { @@ -130,7 +130,7 @@ int cvmx_qlm_interface(int xiface) * @param xiface interface to look up * @param index index in an interface * - * @return the qlm number based on the xiface + * Return: the qlm number based on the xiface */ int cvmx_qlm_lmac(int xiface, int index) { @@ -281,7 +281,7 @@ int cvmx_qlm_lmac(int xiface, int index) * * @param BGX BGX to search for. * - * @return muxes used 0 = DLM5+DLM6, 1 = DLM5, 2 = DLM6. + * Return: muxes used 0 = DLM5+DLM6, 1 = DLM5, 2 = DLM6. */ int cvmx_qlm_mux_interface(int bgx) { @@ -322,7 +322,7 @@ int cvmx_qlm_mux_interface(int bgx) * * @param qlm QLM to examine * - * @return Number of lanes + * Return: Number of lanes */ int cvmx_qlm_get_lanes(int qlm) { @@ -340,7 +340,7 @@ int cvmx_qlm_get_lanes(int qlm) /** * Get the QLM JTAG fields based on Octeon model on the supported chips. * - * @return qlm_jtag_field_t structure + * Return: qlm_jtag_field_t structure */ const __cvmx_qlm_jtag_field_t *cvmx_qlm_jtag_get_field(void) { @@ -361,7 +361,7 @@ const __cvmx_qlm_jtag_field_t *cvmx_qlm_jtag_get_field(void) * Get the QLM JTAG length by going through qlm_jtag_field for each * Octeon model that is supported * - * @return return the length. + * Return: return the length. */ int cvmx_qlm_jtag_get_length(void) { @@ -394,7 +394,7 @@ void cvmx_qlm_init(void) * * @param name Name to lookup * - * @return Field info, or NULL on failure + * Return: Field info, or NULL on failure */ static const __cvmx_qlm_jtag_field_t *__cvmx_qlm_lookup_field(const char *name) { @@ -417,7 +417,7 @@ static const __cvmx_qlm_jtag_field_t *__cvmx_qlm_lookup_field(const char *name) * @param lane Lane in QLM to get * @param name String name of field * - * @return JTAG field value + * Return: JTAG field value */ uint64_t cvmx_qlm_jtag_get(int qlm, int lane, const char *name) { @@ -620,7 +620,7 @@ void __cvmx_qlm_pcie_cfg_rxd_set_tweak(int qlm, int lane) * @param node node of the QLM * @param qlm QLM to examine * - * @return Speed in Mhz + * Return: Speed in Mhz */ int cvmx_qlm_get_gbaud_mhz_node(int node, int qlm) { @@ -723,7 +723,7 @@ int cvmx_qlm_get_gbaud_mhz_node(int node, int qlm) * * @param qlm QLM to examine * - * @return Speed in Mhz + * Return: Speed in Mhz */ int cvmx_qlm_get_gbaud_mhz(int qlm) { @@ -1021,7 +1021,7 @@ static enum cvmx_qlm_mode __cvmx_qlm_get_mode_cn70xx(int qlm) * 1 - PCIe * 2 - SATA * @param interface interface to use - * @return the qlm mode the interface is + * Return: the qlm mode the interface is */ enum cvmx_qlm_mode cvmx_qlm_get_dlm_mode(int interface_type, int interface) { @@ -1875,7 +1875,7 @@ int cvmx_qlm_measure_clock_cn7xxx(int node, int qlm) * @param node node to measure * @param qlm QLM to measure * - * @return Clock rate in Hz + * Return: Clock rate in Hz */ int cvmx_qlm_measure_clock_node(int node, int qlm) { @@ -1890,7 +1890,7 @@ int cvmx_qlm_measure_clock_node(int node, int qlm) * * @param qlm QLM to measure * - * @return Clock rate in Hz + * Return: Clock rate in Hz */ int cvmx_qlm_measure_clock(int qlm) { @@ -1972,7 +1972,7 @@ int cvmx_qlm_measure_clock(int qlm) * @param qlm QLM to perform RX equalization on * @param lane Lane to use, or -1 for all lanes * - * @return Zero on success, negative if any lane failed RX equalization + * Return: Zero on success, negative if any lane failed RX equalization */ int __cvmx_qlm_rx_equalization(int node, int qlm, int lane) { diff --git a/arch/mips/mach-octeon/include/mach/bootoct_cmd.h b/arch/mips/mach-octeon/include/mach/bootoct_cmd.h index 657698ba54..0e21b3a8d3 100644 --- a/arch/mips/mach-octeon/include/mach/bootoct_cmd.h +++ b/arch/mips/mach-octeon/include/mach/bootoct_cmd.h @@ -42,7 +42,7 @@ struct octeon_boot_args { * @param cmd command type * @param[out] boot_args parsed values * - * @return number of arguments parsed + * Return: number of arguments parsed */ int octeon_parse_bootopts(int argc, char *const argv[], enum octeon_boot_cmd_type cmd, diff --git a/arch/mips/mach-octeon/include/mach/cvmx-bootmem.h b/arch/mips/mach-octeon/include/mach/cvmx-bootmem.h index d60668c9ad..283ac5c6bb 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-bootmem.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-bootmem.h @@ -128,7 +128,7 @@ int cvmx_bootmem_init(u64 mem_desc_addr); * @param size Size in bytes of block to allocate * @param alignment Alignment required - must be power of 2 * - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc(u64 size, u64 alignment);

@@ -141,7 +141,7 @@ void *cvmx_bootmem_alloc(u64 size, u64 alignment); * @param size Size in bytes of block to allocate * @param alignment Alignment required - must be power of 2 * - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_node(u64 node, u64 size, u64 alignment);

@@ -156,7 +156,7 @@ void *cvmx_bootmem_alloc_node(u64 node, u64 size, u64 alignment); * @param address Physical address to allocate memory at. If this * memory is not available, the allocation fails. * @param alignment Alignment required - must be power of 2 - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_address(u64 size, u64 address, u64 alignment); @@ -172,7 +172,7 @@ void *cvmx_bootmem_alloc_address(u64 size, u64 address, * @param min_addr defines the minimum address of the range * @param max_addr defines the maximum address of the range * @param alignment Alignment required - must be power of 2 - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_range(u64 size, u64 alignment, u64 min_addr, u64 max_addr); @@ -187,7 +187,7 @@ void *cvmx_bootmem_alloc_range(u64 size, u64 alignment, * @param alignment Alignment required - must be power of 2 * @param name name of block - must be less than CVMX_BOOTMEM_NAME_LEN bytes * - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_named(u64 size, u64 alignment, const char *name); @@ -203,7 +203,7 @@ void *cvmx_bootmem_alloc_named(u64 size, u64 alignment, * @param name name of block - must be less than CVMX_BOOTMEM_NAME_LEN bytes * @param flags Flags to control options for the allocation. * - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_named_flags(u64 size, u64 alignment, const char *name, u32 flags); @@ -219,7 +219,7 @@ void *cvmx_bootmem_alloc_named_flags(u64 size, u64 alignment, * memory is not available, the allocation fails. * @param name name of block - must be less than CVMX_BOOTMEM_NAME_LEN bytes * - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_named_address(u64 size, u64 address, const char *name); @@ -238,7 +238,7 @@ void *cvmx_bootmem_alloc_named_address(u64 size, u64 address, * @param align Alignment of memory to be allocated. (must be a power of 2) * @param name name of block - must be less than CVMX_BOOTMEM_NAME_LEN bytes * - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_named_range(u64 size, u64 min_addr, u64 max_addr, u64 align, @@ -263,7 +263,7 @@ void *cvmx_bootmem_alloc_named_range(u64 size, u64 min_addr, * The initialization function is optional, if omitted the named block * is initialized to all zeros when it is created, i.e. once. * - * @return pointer to block of memory, NULL on error + * Return: pointer to block of memory, NULL on error */ void *cvmx_bootmem_alloc_named_range_once(u64 size, u64 min_addr, @@ -282,7 +282,7 @@ void *cvmx_bootmem_alloc_named_range_once(u64 size, * @param name Name to assign to reserved blocks * @param flags Flags to use when reserving memory * - * @return 0 on failure, + * Return: 0 on failure, * !0 on success */ int cvmx_bootmem_reserve_memory(u64 start_addr, u64 size, @@ -293,7 +293,7 @@ int cvmx_bootmem_reserve_memory(u64 start_addr, u64 size, * * @param name name of block to free * - * @return 0 on failure, + * Return: 0 on failure, * !0 on success */ int cvmx_bootmem_free_named(const char *name); @@ -303,7 +303,7 @@ int cvmx_bootmem_free_named(const char *name); * * @param name name of block to free * - * @return pointer to named block descriptor on success + * Return: pointer to named block descriptor on success * 0 on failure */ const struct cvmx_bootmem_named_block_desc * @@ -317,7 +317,7 @@ cvmx_bootmem_find_named_block(const char *name); * @param min_block_size * Minimum block size to count in total. * - * @return Number of bytes available for allocation that meet the + * Return: Number of bytes available for allocation that meet the * block size requirement */ u64 cvmx_bootmem_available_mem(u64 min_block_size); @@ -350,7 +350,7 @@ void cvmx_bootmem_print_named(void); * CVMX_BOOTMEM_ALIGNMENT_SIZE.) * @param flags Flags to control options for the allocation. * - * @return physical address of block allocated, or -1 on failure + * Return: physical address of block allocated, or -1 on failure */ s64 cvmx_bootmem_phy_alloc(u64 req_size, u64 address_min, u64 address_max, u64 alignment, u32 flags); @@ -379,7 +379,7 @@ s64 cvmx_bootmem_phy_alloc(u64 req_size, u64 address_min, u64 address_max, * * @param flags Flags to control options for the allocation. * - * @return physical address of block allocated, or -1 on failure + * Return: physical address of block allocated, or -1 on failure */ s64 cvmx_bootmem_phy_named_block_alloc(u64 size, u64 min_addr, u64 max_addr, u64 alignment, const char *name, @@ -394,7 +394,7 @@ s64 cvmx_bootmem_phy_named_block_alloc(u64 size, u64 min_addr, u64 max_addr, * * @param flags Flags to control options for the allocation. * - * @return Physical address of the memory block descriptor, zero if not + * Return: Physical address of the memory block descriptor, zero if not * found. If zero returned when name parameter is NULL, then no * memory block descriptors are available. */ @@ -408,7 +408,7 @@ u64 cvmx_bootmem_phy_named_block_find(const char *name, u32 flags); * @param min_block_size * Minimum block size to count in total. * - * @return Number of bytes available for allocation that meet the + * Return: Number of bytes available for allocation that meet the * block size requirement */ u64 cvmx_bootmem_phy_available_mem(u64 min_block_size); @@ -419,7 +419,7 @@ u64 cvmx_bootmem_phy_available_mem(u64 min_block_size); * @param name name of block to free * @param flags flags for passing options * - * @return 0 on failure + * Return: 0 on failure * 1 on success */ int cvmx_bootmem_phy_named_block_free(const char *name, u32 flags); @@ -438,7 +438,7 @@ int cvmx_bootmem_phy_named_block_free(const char *name, u32 flags); * @param size size of block in bytes. * @param flags flags for passing options * - * @return 1 on success, + * Return: 1 on success, * 0 on failure */ int __cvmx_bootmem_phy_free(u64 phy_addr, u64 size, u32 flags); @@ -467,7 +467,7 @@ void cvmx_bootmem_phy_list_print(void); * @param desc_buffer Buffer for the bootmem descriptor. This must be * a 32 bit addressable address. * - * @return 1 on success + * Return: 1 on success * 0 on failure */ s64 cvmx_bootmem_phy_mem_list_init(u64 mem_size, u32 low_reserved_bytes, @@ -487,7 +487,7 @@ s64 cvmx_bootmem_phy_mem_list_init(u64 mem_size, u32 low_reserved_bytes, * @param desc_buffer Buffer for the bootmem descriptor. This must be * a 32 bit addressable address. * - * @return 1 on success + * Return: 1 on success * 0 on failure */ s64 cvmx_bootmem_phy_mem_list_init_multi(u8 nodemask, u32 mem_size[], diff --git a/arch/mips/mach-octeon/include/mach/cvmx-cmd-queue.h b/arch/mips/mach-octeon/include/mach/cvmx-cmd-queue.h index ddc294348c..c83d09c9dd 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-cmd-queue.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-cmd-queue.h @@ -154,7 +154,7 @@ cvmx_cmd_queue_result_t __cvmx_cmd_queue_write_raw(cvmx_cmd_queue_id_t queue_id, * @param fpa_pool FPA pool the command queues should come from. * @param pool_size Size of each buffer in the FPA pool (bytes) * - * @return CVMX_CMD_QUEUE_SUCCESS or a failure code + * Return: CVMX_CMD_QUEUE_SUCCESS or a failure code */ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id, int max_depth, int fpa_pool, int pool_size); @@ -166,7 +166,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id, * * @param queue_id Queue to shutdown * - * @return CVMX_CMD_QUEUE_SUCCESS or a failure code + * Return: CVMX_CMD_QUEUE_SUCCESS or a failure code */ cvmx_cmd_queue_result_t cvmx_cmd_queue_shutdown(cvmx_cmd_queue_id_t queue_id);

@@ -176,7 +176,7 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_shutdown(cvmx_cmd_queue_id_t queue_id); * * @param queue_id Hardware command queue to query * - * @return Number of outstanding commands + * Return: Number of outstanding commands */ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id);

@@ -188,7 +188,7 @@ int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id); * * @param queue_id Command queue to query * - * @return Command buffer or NULL on failure + * Return: Command buffer or NULL on failure */ void *cvmx_cmd_queue_buffer(cvmx_cmd_queue_id_t queue_id);

@@ -204,7 +204,7 @@ cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(unsigned int node); * * @param queue_id Queue ID to get an index for * - * @return Index into the state arrays + * Return: Index into the state arrays */ static inline unsigned int __cvmx_cmd_queue_get_index(cvmx_cmd_queue_id_t queue_id) { @@ -270,7 +270,7 @@ static inline void __cvmx_cmd_queue_lock_init(cvmx_cmd_queue_id_t queue_id) * * @param queue_id Queue id to get * - * @return Queue structure or NULL on failure + * Return: Queue structure or NULL on failure */ static inline __cvmx_cmd_queue_state_t *__cvmx_cmd_queue_get_state(cvmx_cmd_queue_id_t queue_id) { @@ -301,7 +301,7 @@ static inline __cvmx_cmd_queue_state_t *__cvmx_cmd_queue_get_state(cvmx_cmd_queu * @param cmd_count Number of command words to write * @param cmds Array of commands to write * - * @return CVMX_CMD_QUEUE_SUCCESS or a failure code + * Return: CVMX_CMD_QUEUE_SUCCESS or a failure code */ static inline cvmx_cmd_queue_result_t cvmx_cmd_queue_write(cvmx_cmd_queue_id_t queue_id, bool use_locking, int cmd_count, const u64 *cmds) @@ -348,7 +348,7 @@ cvmx_cmd_queue_write(cvmx_cmd_queue_id_t queue_id, bool use_locking, int cmd_cou * @param cmd1 Command * @param cmd2 Command * - * @return CVMX_CMD_QUEUE_SUCCESS or a failure code + * Return: CVMX_CMD_QUEUE_SUCCESS or a failure code */ static inline cvmx_cmd_queue_result_t cvmx_cmd_queue_write2(cvmx_cmd_queue_id_t queue_id, bool use_locking, u64 cmd1, u64 cmd2) @@ -399,7 +399,7 @@ static inline cvmx_cmd_queue_result_t cvmx_cmd_queue_write2(cvmx_cmd_queue_id_t * @param cmd2 Command * @param cmd3 Command * - * @return CVMX_CMD_QUEUE_SUCCESS or a failure code + * Return: CVMX_CMD_QUEUE_SUCCESS or a failure code */ static inline cvmx_cmd_queue_result_t cvmx_cmd_queue_write3(cvmx_cmd_queue_id_t queue_id, bool use_locking, u64 cmd1, u64 cmd2, u64 cmd3) diff --git a/arch/mips/mach-octeon/include/mach/cvmx-coremask.h b/arch/mips/mach-octeon/include/mach/cvmx-coremask.h index 314b6d9789..915e870929 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-coremask.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-coremask.h @@ -101,7 +101,7 @@ struct cvmx_coremask { * @param node starting node number * @param node_mask node mask to use to find the next node * - * @return next node number or -1 if no more nodes are available + * Return: next node number or -1 if no more nodes are available */ static inline int cvmx_coremask_next_node(int node, u8 node_mask) { @@ -132,7 +132,7 @@ static inline int cvmx_coremask_next_node(int node, u8 node_mask) * * @param pcm is the pointer to the coremask. * @param core - * @return 1 if core is set and 0 if not. + * Return: 1 if core is set and 0 if not. */ static inline int cvmx_coremask_is_core_set(const struct cvmx_coremask *pcm, int core) @@ -149,7 +149,7 @@ static inline int cvmx_coremask_is_core_set(const struct cvmx_coremask *pcm, * Is ``current core'' set in the coremask? * * @param pcm is the pointer to the coremask. - * @return 1 if core is set and 0 if not. + * Return: 1 if core is set and 0 if not. */ static inline int cvmx_coremask_is_self_set(const struct cvmx_coremask *pcm) { @@ -159,7 +159,7 @@ static inline int cvmx_coremask_is_self_set(const struct cvmx_coremask *pcm) /** * Is coremask empty? * @param pcm is the pointer to the coremask. - * @return 1 if *pcm is empty (all zeros), 0 if not empty. + * Return: 1 if *pcm is empty (all zeros), 0 if not empty. */ static inline int cvmx_coremask_is_empty(const struct cvmx_coremask *pcm) { @@ -177,7 +177,7 @@ static inline int cvmx_coremask_is_empty(const struct cvmx_coremask *pcm) * * @param pcm is the pointer to the coremask. * @param core - * @return 0. + * Return: 0. */ static inline int cvmx_coremask_set_core(struct cvmx_coremask *pcm, int core) { @@ -194,7 +194,7 @@ static inline int cvmx_coremask_set_core(struct cvmx_coremask *pcm, int core) * Set ``current core'' in the coremask. * * @param pcm is the pointer to the coremask. - * @return 0. + * Return: 0. */ static inline int cvmx_coremask_set_self(struct cvmx_coremask *pcm) { @@ -206,7 +206,7 @@ static inline int cvmx_coremask_set_self(struct cvmx_coremask *pcm) * * @param pcm is the pointer to the coremask. * @param core - * @return 0. + * Return: 0. */ static inline int cvmx_coremask_clear_core(struct cvmx_coremask *pcm, int core) { @@ -223,7 +223,7 @@ static inline int cvmx_coremask_clear_core(struct cvmx_coremask *pcm, int core) * Clear ``current core'' from the coremask. * * @param pcm is the pointer to the coremask. - * @return 0. + * Return: 0. */ static inline int cvmx_coremask_clear_self(struct cvmx_coremask *pcm) { @@ -235,7 +235,7 @@ static inline int cvmx_coremask_clear_self(struct cvmx_coremask *pcm) * * @param pcm is the pointer to the coremask. * @param core - * @return 0. + * Return: 0. */ static inline int cvmx_coremask_toggle_core(struct cvmx_coremask *pcm, int core) { @@ -252,7 +252,7 @@ static inline int cvmx_coremask_toggle_core(struct cvmx_coremask *pcm, int core) * Toggle ``current core'' in the coremask. * * @param pcm is the pointer to the coremask. - * @return 0. + * Return: 0. */ static inline int cvmx_coremask_toggle_self(struct cvmx_coremask *pcm) { @@ -288,7 +288,7 @@ static inline void cvmx_coremask_set64_node(struct cvmx_coremask *pcm, * Gets the lower 64-bits of the coremask * * @param[in] pcm - pointer to coremask - * @return 64-bit coremask for the first node + * Return: 64-bit coremask for the first node */ static inline u64 cvmx_coremask_get64(const struct cvmx_coremask *pcm) { @@ -300,7 +300,7 @@ static inline u64 cvmx_coremask_get64(const struct cvmx_coremask *pcm) * * @param[in] pcm - pointer to coremask * @param node - node to get coremask for - * @return 64-bit coremask for the first node + * Return: 64-bit coremask for the first node */ static inline u64 cvmx_coremask_get64_node(const struct cvmx_coremask *pcm, u8 node) @@ -312,7 +312,7 @@ static inline u64 cvmx_coremask_get64_node(const struct cvmx_coremask *pcm, * Gets the lower 32-bits of the coremask for compatibility * * @param[in] pcm - pointer to coremask - * @return 32-bit coremask for the first node + * Return: 32-bit coremask for the first node * @deprecated This function is to maintain compatibility with older * SDK applications and may disappear at some point. * This function is not compatible with the CN78XX or any other @@ -515,7 +515,7 @@ static inline int cvmx_coremask_get_first_core(const struct cvmx_coremask *pcm) * @param core - starting core to check (can be -1 for core 0) * @param pcm - pointer to coremask to check for the next core. * - * @return next core following the core parameter or -1 if no more cores. + * Return: next core following the core parameter or -1 if no more cores. */ static inline int cvmx_coremask_next_core(int core, const struct cvmx_coremask *pcm) @@ -597,7 +597,7 @@ static inline void cvmx_coremask_copy(struct cvmx_coremask *dest, * @param[in] pcm pointer to the coremask to test against * @param[in] core core to check * - * @return 1 if the core is first core in the coremask, 0 otherwise + * Return: 1 if the core is first core in the coremask, 0 otherwise * */ static inline int cvmx_coremask_is_core_first_core(const struct cvmx_coremask *pcm, @@ -634,7 +634,7 @@ static inline int cvmx_coremask_is_core_first_core(const struct cvmx_coremask *p * * @param[in] pcm - pointer to core mask * - * @return number of bits set in the coremask + * Return: number of bits set in the coremask */ static inline int cvmx_coremask_get_core_count(const struct cvmx_coremask *pcm) { @@ -652,7 +652,7 @@ static inline int cvmx_coremask_get_core_count(const struct cvmx_coremask *pcm) * * @param core - core number (0-1023) * - * @return node number core belongs to + * Return: node number core belongs to */ static inline int cvmx_coremask_core_to_node(int core) { @@ -678,7 +678,7 @@ static inline int cvmx_coremask_core_on_node(int core) * @param main - main coremask to test * @param subset - subset coremask to test * - * @return 0 if the subset contains cores not in the main coremask or 1 if + * Return: 0 if the subset contains cores not in the main coremask or 1 if * the subset is fully contained in the main coremask. */ static inline int cvmx_coremask_is_subset(const struct cvmx_coremask *main, @@ -699,7 +699,7 @@ static inline int cvmx_coremask_is_subset(const struct cvmx_coremask *main, * @param c1 - main coremask to test * @param c2 - subset coremask to test * - * @return 1 if coremask c1 intersects coremask c2, 0 if they are exclusive + * Return: 1 if coremask c1 intersects coremask c2, 0 if they are exclusive */ static inline int cvmx_coremask_intersects(const struct cvmx_coremask *c1, const struct cvmx_coremask *c2) @@ -735,7 +735,7 @@ static inline void cvmx_coremask_mask_node(struct cvmx_coremask *pcm, int node) * * @param[in] pcm - pointer to core mask * - * @return nothing + * Return: nothing */ void cvmx_coremask_print(const struct cvmx_coremask *pcm);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-error.h b/arch/mips/mach-octeon/include/mach/cvmx-error.h index 9a13ed4224..216d32e726 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-error.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-error.h @@ -90,7 +90,7 @@ typedef struct cvmx_error_info { * * @param flags Optional flags. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_initialize(void);

@@ -99,7 +99,7 @@ int cvmx_error_initialize(void); * handlers. This should be called in the RSL interrupt handler * for your application or operating system. * - * @return Number of error handlers called. Zero means this call + * Return: Number of error handlers called. Zero means this call * found no errors and was spurious. */ int cvmx_error_poll(void); @@ -116,7 +116,7 @@ int cvmx_error_poll(void); * call. All members of the structure must be populated, even the * parent information. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_add(const cvmx_error_info_t *new_info);

@@ -136,7 +136,7 @@ int cvmx_error_add(const cvmx_error_info_t *new_info); * @param old_info If not NULL, this is filled with information about the handler * that was removed. * - * @return Zero on success, negative on failure (not found). + * Return: Zero on success, negative on failure (not found). */ int cvmx_error_remove(cvmx_error_register_t reg_type, u64 status_addr, u64 status_mask, cvmx_error_info_t *old_info); @@ -160,7 +160,7 @@ int cvmx_error_remove(cvmx_error_register_t reg_type, u64 status_addr, u64 statu * @param old_user_info * If not NULL, the old user info parameter. * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_error_change_handler(cvmx_error_register_t reg_type, u64 status_addr, u64 status_mask, cvmx_error_func_t new_func, u64 new_user_info, @@ -175,7 +175,7 @@ int cvmx_error_change_handler(cvmx_error_register_t reg_type, u64 status_addr, u * Index for the group as defined in the cvmx_error_group_t * comments. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ /* * Rather than conditionalize the calls throughout the executive to not enable @@ -197,7 +197,7 @@ static inline int cvmx_error_enable_group(cvmx_error_group_t group, int group_in * Index for the group as defined in the cvmx_error_group_t * comments. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ /* * Rather than conditionalize the calls throughout the executive to not disable @@ -218,7 +218,7 @@ static inline int cvmx_error_disable_group(cvmx_error_group_t group, int group_i * All handlers for this status register with this mask will be * enabled. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_enable(cvmx_error_register_t reg_type, u64 status_addr, u64 status_mask);

@@ -232,7 +232,7 @@ int cvmx_error_enable(cvmx_error_register_t reg_type, u64 status_addr, u64 statu * All handlers for this status register with this mask will be * disabled. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_disable(cvmx_error_register_t reg_type, u64 status_addr, u64 status_mask);

@@ -244,7 +244,7 @@ int cvmx_error_disable(cvmx_error_register_t reg_type, u64 status_addr, u64 stat * * @param info Error register to check * - * @return Number of error status bits found or zero if no bits were set. + * Return: Number of error status bits found or zero if no bits were set. */ int __cvmx_error_decode(const cvmx_error_info_t *info);

@@ -264,7 +264,7 @@ int __cvmx_error_display(const cvmx_error_info_t *info); * @param status_addr * Status register address * - * @return Return the handler on success or null on failure. + * Return: Return the handler on success or null on failure. */ cvmx_error_info_t *cvmx_error_get_index(u64 status_addr);

@@ -279,7 +279,7 @@ void __cvmx_install_gmx_error_handler_for_xaui(void); * @param key INTSN value to search for * @param data current entry from the searched array * - * @return Negative, 0 or positive when respectively key is less than, + * Return: Negative, 0 or positive when respectively key is less than, * equal or greater than data. */ int cvmx_error_intsn_cmp(const void *key, const void *data); @@ -291,7 +291,7 @@ int cvmx_error_intsn_cmp(const void *key, const void *data); * * @param node Node number * - * @return Zero on success, -1 on error + * Return: Zero on success, -1 on error */ int cvmx_error_intsn_display_v3(int node, u32 intsn);

@@ -302,7 +302,7 @@ int cvmx_error_intsn_display_v3(int node, u32 intsn); * * @param node Node number * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_initialize_cn78xx(int node);

@@ -312,7 +312,7 @@ int cvmx_error_initialize_cn78xx(int node); * @param node Node number * @param intsn Interrupt source number * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_intsn_enable_v3(int node, u32 intsn);

@@ -322,7 +322,7 @@ int cvmx_error_intsn_enable_v3(int node, u32 intsn); * @param node Node number * @param intsn Interrupt source number * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_intsn_disable_v3(int node, u32 intsn);

@@ -331,7 +331,7 @@ int cvmx_error_intsn_disable_v3(int node, u32 intsn); * * @param intsn Interrupt source number * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_intsn_clear_v3(int node, u32 intsn);

@@ -341,7 +341,7 @@ int cvmx_error_intsn_clear_v3(int node, u32 intsn); * @param node Node number * @param csr_address CSR address * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_error_csr_enable_v3(int node, u64 csr_address);

@@ -351,7 +351,7 @@ int cvmx_error_csr_enable_v3(int node, u64 csr_address); * @param node Node number * @param csr_address CSR address * - * @return Zero + * Return: Zero */ int cvmx_error_csr_disable_v3(int node, u64 csr_address);

@@ -362,7 +362,7 @@ int cvmx_error_csr_disable_v3(int node, u64 csr_address); * @param group Logical group to enable * @param xipd_port The IPD port value * - * @return Zero. + * Return: Zero. */ int cvmx_error_enable_group_v3(cvmx_error_group_t group, int xipd_port);

@@ -372,7 +372,7 @@ int cvmx_error_enable_group_v3(cvmx_error_group_t group, int xipd_port); * @param group Logical group to enable * @param xipd_port The IPD port value * - * @return Zero. + * Return: Zero. */ int cvmx_error_disable_group_v3(cvmx_error_group_t group, int xipd_port);

@@ -384,7 +384,7 @@ int cvmx_error_disable_group_v3(cvmx_error_group_t group, int xipd_port); * @param type Category in a logical group to enable * @param xipd_port The IPD port value * - * @return Zero. + * Return: Zero. */ int cvmx_error_enable_group_type_v3(cvmx_error_group_t group, cvmx_error_type_t type, int xipd_port); @@ -397,7 +397,7 @@ int cvmx_error_enable_group_type_v3(cvmx_error_group_t group, cvmx_error_type_t * @param type Category in a logical group to disable * @param xipd_port The IPD port value * - * @return Zero. + * Return: Zero. */ int cvmx_error_disable_group_type_v3(cvmx_error_group_t group, cvmx_error_type_t type, int xipd_port); @@ -408,7 +408,7 @@ int cvmx_error_disable_group_type_v3(cvmx_error_group_t group, cvmx_error_type_t * @param group Logical group to disable * @param xipd_port The IPD port value * - * @return Zero. + * Return: Zero. */ int cvmx_error_clear_group_v3(cvmx_error_group_t group, int xipd_port);

@@ -418,7 +418,7 @@ int cvmx_error_clear_group_v3(cvmx_error_group_t group, int xipd_port); * @param node CCPI node * @param type category to enable * - *@return Zero. + *Return: Zero. */ int cvmx_error_enable_type_v3(int node, cvmx_error_type_t type);

@@ -428,7 +428,7 @@ int cvmx_error_enable_type_v3(int node, cvmx_error_type_t type); * @param node CCPI node * @param type category to disable * - *@return Zero. + *Return: Zero. */ int cvmx_error_disable_type_v3(int node, cvmx_error_type_t type);

@@ -449,7 +449,7 @@ int __cvmx_cn7xxx_l2c_l2d_ecc_error_display(int node, int intsn); * @param intsn intsn from error array. * @param remote true for remote node (cn78xx only) * - * @return 1 if handled, 0 if not handled + * Return: 1 if handled, 0 if not handled */ int __cvmx_cn7xxx_l2c_tag_error_display(int node, int intsn, bool remote);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-fpa.h b/arch/mips/mach-octeon/include/mach/cvmx-fpa.h index 297fb3f4a2..aa238a8850 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-fpa.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-fpa.h @@ -36,7 +36,7 @@ typedef struct cvmx_fpa_pool_config cvmx_fpa_pool_config_t; * Return the name of the pool * * @param pool_num Pool to get the name of - * @return The name + * Return: The name */ const char *cvmx_fpa_get_name(int pool_num);

@@ -97,7 +97,7 @@ static inline cvmx_fpa3_gaura_t cvmx_fpa1_pool_to_fpa3_aura(cvmx_fpa1_pool_t poo * Get a new block from the FPA * * @param pool Pool to get the block from - * @return Pointer to the block or NULL on failure + * Return: Pointer to the block or NULL on failure */ static inline void *cvmx_fpa_alloc(u64 pool) { @@ -135,7 +135,7 @@ static inline void cvmx_fpa_async_alloc(u64 scr_addr, u64 pool) * @param pool Pool the block came from. Must be the same value * passed to cvmx_fpa_async_alloc. * - * @return Pointer to the block or NULL on failure + * Return: Pointer to the block or NULL on failure */ static inline void *cvmx_fpa_async_alloc_finish(u64 scr_addr, u64 pool) { @@ -194,7 +194,7 @@ static inline void cvmx_fpa_free(void *ptr, u64 pool, u64 num_cache_lines) * @param block_size Size for each block controlled by the FPA * @param num_blocks Number of blocks * - * @return the pool number on Success, + * Return: the pool number on Success, * -1 on failure */ int cvmx_fpa_setup_pool(int pool, const char *name, void *buffer, u64 block_size, u64 num_blocks); @@ -204,7 +204,7 @@ int cvmx_fpa_shutdown_pool(int pool); /** * Gets the block size of buffer in specified pool * @param pool Pool to get the block size from - * @return Size of buffer in specified pool + * Return: Size of buffer in specified pool */ unsigned int cvmx_fpa_get_block_size(int pool);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-fpa1.h b/arch/mips/mach-octeon/include/mach/cvmx-fpa1.h index 6985083a5d..a896d5a46f 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-fpa1.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-fpa1.h @@ -38,7 +38,7 @@ typedef union { * * @param pool FPA pool to allocate/reserve. If -1 it * finds an empty pool to allocate. - * @return Alloctaed pool number or CVMX_FPA1_POOL_INVALID + * Return: Alloctaed pool number or CVMX_FPA1_POOL_INVALID * if fails to allocate the pool */ cvmx_fpa1_pool_t cvmx_fpa1_reserve_pool(cvmx_fpa1_pool_t pool); @@ -46,7 +46,7 @@ cvmx_fpa1_pool_t cvmx_fpa1_reserve_pool(cvmx_fpa1_pool_t pool); /** * Free the specified fpa pool. * @param pool Pool to free - * @return 0 for success -1 failure + * Return: 0 for success -1 failure */ int cvmx_fpa1_release_pool(cvmx_fpa1_pool_t pool);

@@ -173,7 +173,7 @@ static inline void cvmx_fpa1_async_alloc(u64 scr_addr, cvmx_fpa1_pool_t pool) * @param pool Pool the block came from. Must be the same value * passed to cvmx_fpa_async_alloc. * - * @return Pointer to the block or NULL on failure + * Return: Pointer to the block or NULL on failure */ static inline void *cvmx_fpa1_async_alloc_finish(u64 scr_addr, cvmx_fpa1_pool_t pool) { diff --git a/arch/mips/mach-octeon/include/mach/cvmx-fpa3.h b/arch/mips/mach-octeon/include/mach/cvmx-fpa3.h index 229982b831..b3e04d7f02 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-fpa3.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-fpa3.h @@ -206,7 +206,7 @@ static inline cvmx_fpa3_pool_t cvmx_fpa3_aura_to_pool(cvmx_fpa3_gaura_t aura) * Get a new block from the FPA pool * * @param aura - aura number - * @return pointer to the block or NULL on failure + * Return: pointer to the block or NULL on failure */ static inline void *cvmx_fpa3_alloc(cvmx_fpa3_gaura_t aura) { @@ -267,7 +267,7 @@ static inline void cvmx_fpa3_async_alloc(u64 scr_addr, cvmx_fpa3_gaura_t aura) * @param aura Global aura the block came from. Must be the same value * passed to cvmx_fpa_async_alloc. * - * @return Pointer to the block or NULL on failure + * Return: Pointer to the block or NULL on failure */ static inline void *cvmx_fpa3_async_alloc_finish(u64 scr_addr, cvmx_fpa3_gaura_t aura) { @@ -376,7 +376,7 @@ static inline int cvmx_fpa3_config_red_params(unsigned int node, int qos_avg_en, * Gets the buffer size of the specified pool, * * @param aura Global aura number - * @return Returns size of the buffers in the specified pool. + * Return: Returns size of the buffers in the specified pool. */ static inline int cvmx_fpa3_get_aura_buf_size(cvmx_fpa3_gaura_t aura) { @@ -395,7 +395,7 @@ static inline int cvmx_fpa3_get_aura_buf_size(cvmx_fpa3_gaura_t aura) * Return the number of available buffers in an AURA * * @param aura to receive count for - * @return available buffer count + * Return: available buffer count */ static inline long long cvmx_fpa3_get_available(cvmx_fpa3_gaura_t aura) { @@ -500,7 +500,7 @@ cvmx_fpa3_pool_t cvmx_fpa3_setup_fill_pool(int node, int desired_pool, const cha * @param block_size - size of buffers to use * @param num_blocks - number of blocks to allocate * - * @return configured gaura on success, CVMX_FPA3_INVALID_GAURA on failure + * Return: configured gaura on success, CVMX_FPA3_INVALID_GAURA on failure */ cvmx_fpa3_gaura_t cvmx_fpa3_set_aura_for_pool(cvmx_fpa3_pool_t pool, int desired_aura, const char *name, unsigned int block_size, diff --git a/arch/mips/mach-octeon/include/mach/cvmx-fuse.h b/arch/mips/mach-octeon/include/mach/cvmx-fuse.h index a06a1326cb..3c248b0310 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-fuse.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-fuse.h @@ -11,7 +11,7 @@ * @param node node to read from * @param byte_addr address to read * - * @return fuse value: 0 or 1 + * Return: fuse value: 0 or 1 */ static inline u8 cvmx_fuse_read_byte_node(u8 node, int byte_addr) { @@ -31,7 +31,7 @@ static inline u8 cvmx_fuse_read_byte_node(u8 node, int byte_addr) * Read a byte of fuse data * @param byte_addr address to read * - * @return fuse value: 0 or 1 + * Return: fuse value: 0 or 1 */ static inline u8 cvmx_fuse_read_byte(int byte_addr) { @@ -44,7 +44,7 @@ static inline u8 cvmx_fuse_read_byte(int byte_addr) * @param node Node number * @param fuse Fuse number (0-1024) * - * @return fuse value: 0 or 1 + * Return: fuse value: 0 or 1 */ static inline int cvmx_fuse_read_node(u8 node, int fuse) { @@ -56,7 +56,7 @@ static inline int cvmx_fuse_read_node(u8 node, int fuse) * * @param fuse Fuse number (0-1024) * - * @return fuse value: 0 or 1 + * Return: fuse value: 0 or 1 */ static inline int cvmx_fuse_read(int fuse) { diff --git a/arch/mips/mach-octeon/include/mach/cvmx-global-resources.h b/arch/mips/mach-octeon/include/mach/cvmx-global-resources.h index 28c32ddbe1..e742868360 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-global-resources.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-global-resources.h @@ -116,7 +116,7 @@ int cvmx_create_global_resource_range(struct global_resource_tag tag, int neleme * @param nelements is the number of elements to be allocated. * @param owner is a 64 bit number that identifes the owner of this range. * @aligment specifes the required alignment of the returned base number. - * @return returns the base of the allocated range. -1 return value indicates + * Return: returns the base of the allocated range. -1 return value indicates * failure. */ int cvmx_allocate_global_resource_range(struct global_resource_tag tag, u64 owner, int nelements, @@ -133,7 +133,7 @@ int cvmx_allocate_global_resource_range(struct global_resource_tag tag, u64 owne * @param owner is a 64 bit number that identifes the owner of the allocated * elements. * @param allocated_elements returns indexs of the allocated entries. - * @return returns 0 on success and -1 on failure. + * Return: returns 0 on success and -1 on failure. */ int cvmx_resource_alloc_many(struct global_resource_tag tag, u64 owner, int nelements, int allocated_elements[]); @@ -148,7 +148,7 @@ int cvmx_resource_alloc_reverse(struct global_resource_tag, u64 owner); * @param nelements is the number of elements to be allocated. * @param owner is a 64 bit number that identifes the owner of this range. * @base specifies the base start of nelements. - * @return returns the base of the allocated range. -1 return value indicates + * Return: returns the base of the allocated range. -1 return value indicates * failure. */ int cvmx_reserve_global_resource_range(struct global_resource_tag tag, u64 owner, int base, @@ -160,7 +160,7 @@ int cvmx_reserve_global_resource_range(struct global_resource_tag tag, u64 owner * @param tag is the tag of the global resource range. * @param base is the base number * @param nelements is the number of elements that are to be freed. - * @return returns 0 if successful and -1 on failure. + * Return: returns 0 if successful and -1 on failure. */ int cvmx_free_global_resource_range_with_base(struct global_resource_tag tag, int base, int nelements); @@ -172,7 +172,7 @@ int cvmx_free_global_resource_range_with_base(struct global_resource_tag tag, in * @param tag is the tag of the global resource range. * @param bases is an array containing the bases to be freed. * @param nelements is the number of elements that are to be freed. - * @return returns 0 if successful and -1 on failure. + * Return: returns 0 if successful and -1 on failure. */ int cvmx_free_global_resource_range_multiple(struct global_resource_tag tag, int bases[], int nelements); @@ -182,7 +182,7 @@ int cvmx_free_global_resource_range_multiple(struct global_resource_tag tag, int * specified tag. * @param tag is the tag of the global resource range. * @param owner is the owner of resources that are to be freed. - * @return returns 0 if successful and -1 on failure. + * Return: returns 0 if successful and -1 on failure. */ int cvmx_free_global_resource_range_with_owner(struct global_resource_tag tag, int owner);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h index 7a5e4d89d3..68a3079c0c 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-agl.h @@ -21,7 +21,7 @@ int cvmx_helper_agl_get_port(int xiface); * * @param interface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_agl_probe(int interface);

@@ -33,7 +33,7 @@ int __cvmx_helper_agl_probe(int interface); * * @param interface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_agl_enable(int interface);

@@ -46,7 +46,7 @@ int __cvmx_helper_agl_enable(int interface); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_agl_link_get(int ipd_port);

@@ -61,7 +61,7 @@ cvmx_helper_link_info_t __cvmx_helper_agl_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_agl_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h index ead6193ec0..4edfdf9cc2 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-bgx.h @@ -29,7 +29,7 @@ void cvmx_helper_bgx_disable(int xipd_port); * * @param xiface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_bgx_probe(int xiface);

@@ -42,7 +42,7 @@ int __cvmx_helper_bgx_probe(int xiface); * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_bgx_sgmii_enable(int xiface);

@@ -56,7 +56,7 @@ int __cvmx_helper_bgx_sgmii_enable(int xiface); * * @param xipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_bgx_sgmii_link_get(int xipd_port);

@@ -72,7 +72,7 @@ cvmx_helper_link_info_t __cvmx_helper_bgx_sgmii_link_get(int xipd_port); * @param xipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_bgx_sgmii_link_set(int xipd_port, cvmx_helper_link_info_t link_info);

@@ -89,7 +89,7 @@ int __cvmx_helper_bgx_sgmii_link_set(int xipd_port, cvmx_helper_link_info_t link * @param enable_external * Non zero if you want external loopback * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int __cvmx_helper_bgx_sgmii_configure_loopback(int xipd_port, int enable_internal, int enable_external); @@ -103,7 +103,7 @@ int __cvmx_helper_bgx_sgmii_configure_loopback(int xipd_port, int enable_interna * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_bgx_xaui_enable(int xiface);

@@ -117,7 +117,7 @@ int __cvmx_helper_bgx_xaui_enable(int xiface); * * @param xipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_bgx_xaui_link_get(int xipd_port);

@@ -133,7 +133,7 @@ cvmx_helper_link_info_t __cvmx_helper_bgx_xaui_link_get(int xipd_port); * @param xipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_bgx_xaui_link_set(int xipd_port, cvmx_helper_link_info_t link_info);

@@ -150,7 +150,7 @@ int __cvmx_helper_bgx_xaui_link_set(int xipd_port, cvmx_helper_link_info_t link_ * @param enable_external * Non zero if you want external loopback * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int __cvmx_helper_bgx_xaui_configure_loopback(int xipd_port, int enable_internal, int enable_external); @@ -239,7 +239,7 @@ int __cvmx_helper_bgx_fifo_size(int xiface, unsigned int lmac); * @param xiface xinterface to check * @param index port index (must be 0 for rgmii) * - * @return true if RGMII, false otherwise + * Return: true if RGMII, false otherwise */ static inline bool cvmx_helper_bgx_is_rgmii(int xiface, int index) { @@ -257,7 +257,7 @@ static inline bool cvmx_helper_bgx_is_rgmii(int xiface, int index) * @param xiface global interface number * @param index interface index * - * @return true, if Super-MAC/PCS mode, false -- otherwise + * Return: true, if Super-MAC/PCS mode, false -- otherwise */ bool cvmx_helper_bgx_is_smu(int xiface, int index);

@@ -271,7 +271,7 @@ bool cvmx_helper_bgx_is_smu(int xiface, int index); * @param type PAUSE packet type. * @param time Pause time for PAUSE packets (number of 512 bit-times). * @param interval Interval between PAUSE packets (number of 512 bit-times). - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_bgx_set_pause_pkt_param(int xipd_port, u64 smac, u64 dmac, unsigned int type, unsigned int time, unsigned int interval); @@ -283,7 +283,7 @@ int cvmx_bgx_set_pause_pkt_param(int xipd_port, u64 smac, u64 dmac, unsigned int * @param xipd_port Global IPD port (node + IPD port). * @param type Flow-control type/protocol. * @param mode Flow-control mode. - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_bgx_set_flowctl_mode(int xipd_port, cvmx_qos_proto_t qos, cvmx_qos_pkt_mode_t mode);

@@ -294,7 +294,7 @@ int cvmx_bgx_set_flowctl_mode(int xipd_port, cvmx_qos_proto_t qos, cvmx_qos_pkt_ * @param index port index * @param enable true to enable autonegotiation, false to disable it * - * @return 0 for success, -1 on error. + * Return: 0 for success, -1 on error. */ int cvmx_helper_set_autonegotiation(int xiface, int index, bool enable);

@@ -305,7 +305,7 @@ int cvmx_helper_set_autonegotiation(int xiface, int index, bool enable); * @param index port index * @param enable set to true to enable FEC, false to disable * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error * * @NOTE: If autonegotiation is enabled then autonegotiation will be * restarted for negotiating FEC. diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-board.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-board.h index d7a7b7d227..5837592d21 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-board.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-board.h @@ -329,7 +329,7 @@ typedef struct cvmx_phy_info { * * @param ipd_port Octeon IPD port to get the MII address for. * - * @return MII PHY address and bus number or -1. + * Return: MII PHY address and bus number or -1. */ int cvmx_helper_board_get_mii_address(int ipd_port);

@@ -346,7 +346,7 @@ int cvmx_helper_board_get_mii_address(int ipd_port); * @param link_info Link speed to program. If the speed is zero and autonegotiation * is enabled, all possible negotiation speeds are advertised. * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_board_link_set_phy(int phy_addr, cvmx_helper_board_set_phy_link_flags_types_t link_flags, @@ -368,7 +368,7 @@ int cvmx_helper_board_link_set_phy(int phy_addr, * @param ipd_port IPD input port associated with the port we want to get link * status for. * - * @return The ports link status. If the link isn't fully resolved, this must + * Return: The ports link status. If the link isn't fully resolved, this must * return zero. */ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port); @@ -392,7 +392,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port); * @param supported_ports * Number of ports Octeon supports. * - * @return Number of ports the actual board supports. Many times this will + * Return: Number of ports the actual board supports. Many times this will * simple be "support_ports". */ int __cvmx_helper_board_interface_probe(int interface, int supported_ports); @@ -406,7 +406,7 @@ int __cvmx_helper_board_interface_probe(int interface, int supported_ports); * * @param interface Interface to enable * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_board_hardware_enable(int interface);

@@ -415,7 +415,7 @@ int __cvmx_helper_board_hardware_enable(int interface); * Gets the clock type used for the USB block based on board type. * Used by the USB code for auto configuration of clock type. * - * @return USB clock type enumeration + * Return: USB clock type enumeration */ cvmx_helper_board_usb_clock_types_t __cvmx_helper_board_usb_get_clock_type(void);

@@ -427,7 +427,7 @@ cvmx_helper_board_usb_clock_types_t __cvmx_helper_board_usb_get_clock_type(void) * @param supported_ports expected number of ports based on chip type; * * - * @return number of available usb ports, based on board specifics. + * Return: number of available usb ports, based on board specifics. * Return value is supported_ports if function does not * override. */ @@ -440,7 +440,7 @@ int __cvmx_helper_board_usb_get_num_ports(int supported_ports); * @param fdt_addr - address fo flat device tree * @param ipd_port - IPD port number * - * @return 1 if port is present, 0 if not present, -1 if error + * Return: 1 if port is present, 0 if not present, -1 if error */ int __cvmx_helper_board_get_port_from_dt(void *fdt_addr, int ipd_port);

@@ -450,7 +450,7 @@ int __cvmx_helper_board_get_port_from_dt(void *fdt_addr, int ipd_port); * * @param ipd_port - ipd port number to get the host mode for * - * @return host mode for phy + * Return: host mode for phy */ cvmx_phy_host_mode_t cvmx_helper_board_get_phy_host_mode(int ipd_port);

@@ -462,7 +462,7 @@ cvmx_phy_host_mode_t cvmx_helper_board_get_phy_host_mode(int ipd_port); * @param[out] - phy_info - phy info data structure * @param ipd_port - port to get phy info for * - * @return 0 for success, -1 if info not available + * Return: 0 for success, -1 if info not available * * NOTE: The phy_info data structure is subject to change. */ @@ -474,7 +474,7 @@ int cvmx_helper_board_get_phy_info(cvmx_phy_info_t *phy_info, int ipd_port); * * @param fdt_addr Pointer to device tree * - * @return 0 for success, -1 on error. + * Return: 0 for success, -1 on error. */ int __cvmx_helper_parse_bgx_dt(const void *fdt_addr);

@@ -484,7 +484,7 @@ int __cvmx_helper_parse_bgx_dt(const void *fdt_addr); * * @param fdt_addr Pointer to device tree * - * @return 0 for success, -1 on error. + * Return: 0 for success, -1 on error. */ int __cvmx_helper_parse_bgx_rgmii_dt(const void *fdt_addr);

@@ -513,7 +513,7 @@ void cvmx_update_rx_activity_led(int xiface, int index, bool check_time); * @param xiface xinterface number * @param index port index on interface * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error * * This function figures out the proper mod_abs_changed function to use and * registers the appropriate function. This should be called after the device @@ -529,7 +529,7 @@ int cvmx_helper_phy_register_mod_abs_changed(int xiface, int index); * @param xiface xinterface number * @param index port index on interface * - * @return 0 if signal present, 1 if loss of signal. + * Return: 0 if signal present, 1 if loss of signal. * * @NOTE: A result of 0 is possible in some cases where the signal is * not present. diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h index d4bd910b01..39260d8649 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-cfg.h @@ -193,7 +193,7 @@ extern int cvmx_enable_helper_flag; * * @param interface the interface number * @param index the port's index number - * @return the pknd + * Return: the pknd */ int __cvmx_helper_cfg_pknd(int interface, int index);

@@ -203,7 +203,7 @@ int __cvmx_helper_cfg_pknd(int interface, int index); * * @param interface the interface number * @param index the port's index number - * @return the bpid + * Return: the bpid */ int __cvmx_helper_cfg_bpid(int interface, int index);

@@ -213,7 +213,7 @@ int __cvmx_helper_cfg_bpid(int interface, int index); * * @param interface the interface number * @param index the port's index number - * @return the pko_port base + * Return: the pko_port base */ int __cvmx_helper_cfg_pko_port_base(int interface, int index);

@@ -223,7 +223,7 @@ int __cvmx_helper_cfg_pko_port_base(int interface, int index); * * @param interface the interface number * @param index the port's index number - * @return the number of pko_ports + * Return: the number of pko_ports */ int __cvmx_helper_cfg_pko_port_num(int interface, int index);

@@ -232,7 +232,7 @@ int __cvmx_helper_cfg_pko_port_num(int interface, int index); * Return the configured pko_queue base for the pko_port * * @param pko_port - * @return the pko_queue base + * Return: the pko_queue base */ int __cvmx_helper_cfg_pko_queue_base(int pko_port);

@@ -241,7 +241,7 @@ int __cvmx_helper_cfg_pko_queue_base(int pko_port); * Return the configured number of pko_queues for the pko_port * * @param pko_port - * @return the number of pko_queues + * Return: the number of pko_queues */ int __cvmx_helper_cfg_pko_queue_num(int pko_port);

@@ -250,7 +250,7 @@ int __cvmx_helper_cfg_pko_queue_num(int pko_port); * Return the interface the pko_port is configured for * * @param pko_port - * @return the interface for the pko_port + * Return: the interface for the pko_port */ int __cvmx_helper_cfg_pko_port_interface(int pko_port);

@@ -259,7 +259,7 @@ int __cvmx_helper_cfg_pko_port_interface(int pko_port); * Return the index of the port the pko_port is configured for * * @param pko_port - * @return the index of the port + * Return: the index of the port */ int __cvmx_helper_cfg_pko_port_index(int pko_port);

@@ -268,7 +268,7 @@ int __cvmx_helper_cfg_pko_port_index(int pko_port); * Return the pko_eid of the pko_port * * @param pko_port - * @return the pko_eid + * Return: the pko_eid */ int __cvmx_helper_cfg_pko_port_eid(int pko_port);

@@ -276,7 +276,7 @@ int __cvmx_helper_cfg_pko_port_eid(int pko_port); * @INTERNAL * Return the max# of pko queues allocated. * - * @return the max# of pko queues + * Return: the max# of pko queues * * Note: there might be holes in the queue space depending on user * configuration. The function returns the highest queue's index in @@ -288,7 +288,7 @@ int __cvmx_helper_cfg_pko_max_queue(void); * @INTERNAL * Return the max# of PKO DMA engines allocated. * - * @return the max# of DMA engines + * Return: the max# of DMA engines * * NOTE: the DMA engines are allocated contiguously and starting from * 0. @@ -299,7 +299,7 @@ int __cvmx_helper_cfg_pko_max_engine(void); * Get the value set for the config option ``opt''. * * @param opt is the config option. - * @return the value set for the option + * Return: the value set for the option * * LR: only used for DWB in NPI, POW, PKO1 */ @@ -310,7 +310,7 @@ u64 cvmx_helper_cfg_opt_get(cvmx_helper_cfg_option_t opt); * * @param opt is the config option. * @param val is the value to set for the opt. - * @return 0 for success and -1 on error + * Return: 0 for success and -1 on error * * Note an option here is a config-time parameter and this means that * it has to be set before calling the corresponding setup functions @@ -324,7 +324,7 @@ int cvmx_helper_cfg_opt_set(cvmx_helper_cfg_option_t opt, u64 val); * Retrieve the pko_port base given ipd_port. * * @param ipd_port is the IPD eport - * @return the corresponding PKO port base for the physical port + * Return: the corresponding PKO port base for the physical port * represented by the IPD eport or CVMX_HELPER_CFG_INVALID_VALUE. */ int cvmx_helper_cfg_ipd2pko_port_base(int ipd_port); @@ -333,7 +333,7 @@ int cvmx_helper_cfg_ipd2pko_port_base(int ipd_port); * Retrieve the number of pko_ports given ipd_port. * * @param ipd_port is the IPD eport - * @return the corresponding number of PKO ports for the physical port + * Return: the corresponding number of PKO ports for the physical port * represented by IPD eport or CVMX_HELPER_CFG_INVALID_VALUE. */ int cvmx_helper_cfg_ipd2pko_port_num(int ipd_port); @@ -343,7 +343,7 @@ int cvmx_helper_cfg_ipd2pko_port_num(int ipd_port); * The init function * * @param node - * @return 0 for success. + * Return: 0 for success. * * Note: this function is meant to be called to set the ``configured * parameters,'' e.g., pknd, bpid, etc. and therefore should be before @@ -357,7 +357,7 @@ int __cvmx_helper_init_port_config_data(int node); * The local init function * * @param none - * @return 0 for success. + * Return: 0 for success. * * Note: this function is meant to be called to set the ``configured * parameters locally,'' e.g., pknd, bpid, etc. and therefore should be before @@ -390,7 +390,7 @@ void cvmx_helper_cfg_store_short_packets_in_wqe(void); * port. This call will allocate a total of * (port_cnt * queue_cnt) queues * - * @return 0 on success + * Return: 0 on success * -1 on failure * * LR: Called ONLY from comfig-parse! @@ -402,14 +402,14 @@ int cvmx_pko_alloc_iport_and_queues(int interface, int port, int port_cnt, int q * * @param port the internal port for which the queues are freed. * - * @return 0 on success + * Return: 0 on success * -1 on failure */ int cvmx_pko_queue_free(u64 port);

/* * Initializes the pko queue range data structure. - * @return 0 on success + * Return: 0 on success * -1 on failure */ int init_cvmx_pko_que_range(void); @@ -425,7 +425,7 @@ void cvmx_pko_queue_free_all(void); * @param xiface interface to check * @param index port index in the interface * - * @return status of the port present or not. + * Return: status of the port present or not. */ int cvmx_helper_is_port_valid(int xiface, int index);

@@ -445,7 +445,7 @@ void cvmx_helper_set_port_valid(int interface, int index, bool valid); * @param interface the interface number * @param index the port's index number * - * @return 1 if port is in PHY mode, 0 if port is in MAC mode + * Return: 1 if port is in PHY mode, 0 if port is in MAC mode */ bool cvmx_helper_get_mac_phy_mode(int interface, int index); void cvmx_helper_set_mac_phy_mode(int interface, int index, bool valid); @@ -457,7 +457,7 @@ void cvmx_helper_set_mac_phy_mode(int interface, int index, bool valid); * @param interface the interface number * @param index the port's index number * - * @return 1 if port is in 1000Base X mode, 0 if port is in SGMII mode + * Return: 1 if port is in 1000Base X mode, 0 if port is in SGMII mode */ bool cvmx_helper_get_1000x_mode(int interface, int index); void cvmx_helper_set_1000x_mode(int interface, int index, bool valid); @@ -521,7 +521,7 @@ void cvmx_helper_set_port_fdt_node_offset(int xiface, int index, int node_offset * * @param xiface node and interface * @param index port index - * @return node offset of port or -1 if invalid + * Return: node offset of port or -1 if invalid */ int cvmx_helper_get_port_fdt_node_offset(int xiface, int index);

@@ -541,7 +541,7 @@ void cvmx_helper_set_phy_fdt_node_offset(int xiface, int index, int node_offset) * * @param xiface node and interface * @param index port index - * @return node offset of phy or -1 if invalid + * Return: node offset of phy or -1 if invalid */ int cvmx_helper_get_phy_fdt_node_offset(int xiface, int index);

@@ -563,7 +563,7 @@ void cvmx_helper_set_port_autonegotiation(int xiface, int index, bool enable); * @param xiface node and interface * @param index port index * - * @return 0 if autonegotiation is disabled, 1 if enabled. + * Return: 0 if autonegotiation is disabled, 1 if enabled. */ bool cvmx_helper_get_port_autonegotiation(int xiface, int index);

@@ -574,7 +574,7 @@ bool cvmx_helper_get_port_autonegotiation(int xiface, int index); * @param xiface node and interface * @param index port index * - * @return 0 if fec is disabled, 1 if enabled. + * Return: 0 if fec is disabled, 1 if enabled. */ bool cvmx_helper_get_port_fec(int xiface, int index);

@@ -683,7 +683,7 @@ void cvmx_helper_set_port_phy_info(int xiface, int index, struct cvmx_phy_info * * @param xiface node and interface * @param index port index * - * @return pointer to PHY information data structure or NULL if not set + * Return: pointer to PHY information data structure or NULL if not set */ struct cvmx_phy_info *cvmx_helper_get_port_phy_info(int xiface, int index);

@@ -694,7 +694,7 @@ struct cvmx_phy_info *cvmx_helper_get_port_phy_info(int xiface, int index); * @param xiface node and interface * @param index portindex * - * @return pointer to the PHY LED information data structure or NULL if not + * Return: pointer to the PHY LED information data structure or NULL if not * present */ struct cvmx_phy_gpio_leds *cvmx_helper_get_port_phy_leds(int xiface, int index); @@ -760,7 +760,7 @@ int cvmx_helper_pko_queue_config_set(int node, cvmx_user_static_pko_queue_config * @param xiface node and interface * @param index port index * - * @return offset in device tree or -1 if error or not defined. + * Return: offset in device tree or -1 if error or not defined. */ int cvmx_helper_cfg_get_sfp_fdt_offset(int xiface, int index);

@@ -769,7 +769,7 @@ int cvmx_helper_cfg_get_sfp_fdt_offset(int xiface, int index); * * @param of_offset Node offset of port to search for * - * @return ipd_port or -1 if not found + * Return: ipd_port or -1 if not found */ int cvmx_helper_cfg_get_ipd_port_by_fdt_node_offset(int of_offset);

@@ -790,7 +790,7 @@ void cvmx_helper_cfg_set_sfp_fdt_offset(int xiface, int index, int sfp_of_offset * @param[out] xiface xinterface of match * @param[out] index port index of match * - * @return 0 if found, -1 if not found + * Return: 0 if found, -1 if not found */ int cvmx_helper_cfg_get_xiface_index_by_fdt_node_offset(int of_offset, int *xiface, int *index);

@@ -801,7 +801,7 @@ int cvmx_helper_cfg_get_xiface_index_by_fdt_node_offset(int of_offset, int *xifa * @param xiface node and interface * @param index port index * - * @return pointer to vsc7224 data structure or NULL if not present + * Return: pointer to vsc7224 data structure or NULL if not present */ struct cvmx_vsc7224_chan *cvmx_helper_cfg_get_vsc7224_chan_info(int xiface, int index);

@@ -822,7 +822,7 @@ void cvmx_helper_cfg_set_vsc7224_chan_info(int xiface, int index, * @param xiface node and interface * @param index port index * - * @return pointer to avsp5410 data structure or NULL if not present + * Return: pointer to avsp5410 data structure or NULL if not present */ struct cvmx_avsp5410 *cvmx_helper_cfg_get_avsp5410_info(int xiface, int index);

@@ -841,7 +841,7 @@ void cvmx_helper_cfg_set_avsp5410_info(int xiface, int index, struct cvmx_avsp54 * @param xiface node and interface * @param index port index * - * @return pointer to SFP data structure or NULL if none + * Return: pointer to SFP data structure or NULL if none */ struct cvmx_fdt_sfp_info *cvmx_helper_cfg_get_sfp_info(int xiface, int index);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h index 9ed13c1626..697a6f04b8 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-errata.h @@ -17,7 +17,7 @@ * @INTERNAL * Function to adjust internal IPD pointer alignments * - * @return 0 on success + * Return: 0 on success * !0 on failure */ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void); @@ -35,7 +35,7 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void); * in each buffer). * * @param work Work queue entry to fix - * @return Zero on success. Negative on failure + * Return: Zero on success. Negative on failure */ int cvmx_helper_fix_ipd_packet_chain(cvmx_wqe_t *work);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h index d3809aec29..3328845570 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-fdt.h @@ -141,7 +141,7 @@ struct cvmx_fdt_sfp_info { * @param[in,out] lenp Number of phandles, input max number * @param[out] nodes Array of phandle nodes * - * @return -ve error code on error or 0 for success + * Return: -ve error code on error or 0 for success */ int cvmx_fdt_lookup_phandles(const void *fdt_addr, int node, const char *prop_name, int *lenp, int *nodes); @@ -153,7 +153,7 @@ int cvmx_fdt_lookup_phandles(const void *fdt_addr, int node, const char *prop_na * @param node node to read address from * @param prop_name property name to read * - * @return address of property or FDT_ADDR_T_NONE if not found + * Return: address of property or FDT_ADDR_T_NONE if not found */ static inline fdt_addr_t cvmx_fdt_get_addr(const void *fdt_addr, int node, const char *prop_name) { @@ -168,7 +168,7 @@ static inline fdt_addr_t cvmx_fdt_get_addr(const void *fdt_addr, int node, const * @param[in] prop_name property name to read * @param default_val default value to return if property doesn't exist * - * @return integer value of property or default_val if it doesn't exist. + * Return: integer value of property or default_val if it doesn't exist. */ static inline int cvmx_fdt_get_int(const void *fdt_addr, int node, const char *prop_name, int default_val) @@ -195,7 +195,7 @@ static inline u64 cvmx_fdt_get_uint64(const void *fdt_addr, int node, const char * @param node node to read phandle from * @param[in] prop_name name of property to find * - * @return node offset if found, -ve error code on error + * Return: node offset if found, -ve error code on error */ static inline int cvmx_fdt_lookup_phandle(const void *fdt_addr, int node, const char *prop_name) { @@ -214,7 +214,7 @@ static inline int cvmx_fdt_lookup_phandle(const void *fdt_addr, int node, const * NOTE: in_addr must be in the native ENDIAN * format. * - * @return Translated address or FDT_ADDR_T_NONE if address cannot be + * Return: Translated address or FDT_ADDR_T_NONE if address cannot be * translated. */ static inline u64 cvmx_fdt_translate_address(const void *fdt_addr, int node, const u32 *in_addr) @@ -228,7 +228,7 @@ static inline u64 cvmx_fdt_translate_address(const void *fdt_addr, int node, con * @param[in] s1 First string to compare * @param[in] sw Second string to compare * - * @return 0 if no match + * Return: 0 if no match * 1 if only the part number matches and not the manufacturer * 2 if both the part number and manufacturer match */ @@ -241,7 +241,7 @@ int cvmx_fdt_compat_match(const char *s1, const char *s2); * @param llen string list total length * @param[in] str string to search for * - * @return 1 if string list contains string, 0 if it does not. + * Return: 1 if string list contains string, 0 if it does not. */ int cvmx_fdt_compat_list_contains(const char *slist, int llen, const char *str);

@@ -252,7 +252,7 @@ int cvmx_fdt_compat_list_contains(const char *slist, int llen, const char *str); * @param node node offset to check * @param[in] compat compatible string to check * - * @return 0 if compatible, 1 if not compatible, error if negative + * Return: 0 if compatible, 1 if not compatible, error if negative */ int cvmx_fdt_node_check_compatible(const void *fdt_addr, int node, const char *compat);

@@ -263,7 +263,7 @@ int cvmx_fdt_node_check_compatible(const void *fdt_addr, int node, const char *c * @param[in] compat compatible string * @param[in] str string to check * - * @return 0 if not compatible, 1 if manufacturer compatible, 2 if + * Return: 0 if not compatible, 1 if manufacturer compatible, 2 if * part is compatible, 3 if both part and manufacturer are * compatible. */ @@ -276,7 +276,7 @@ int __cvmx_fdt_compat_match(const char *compat, const char *str); * @param phandle phandle to GPIO * @param[out] size Number of pins (optional, may be NULL) * - * @return Type of GPIO device or PIN_ERROR if error + * Return: Type of GPIO device or PIN_ERROR if error */ enum cvmx_gpio_type cvmx_fdt_get_gpio_type(const void *fdt_addr, int phandle, int *size);

@@ -289,7 +289,7 @@ enum cvmx_gpio_type cvmx_fdt_get_gpio_type(const void *fdt_addr, int phandle, in * NULL for none. * @param[out] addr TWSI address number, can be NULL for none * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ int cvmx_fdt_get_twsi_gpio_bus_addr(const void *fdt_addr, int phandle, int *bus, int *addr);

@@ -299,7 +299,7 @@ int cvmx_fdt_get_twsi_gpio_bus_addr(const void *fdt_addr, int phandle, int *bus, * @param[in] fdt_addr Address of FDT * @param node FDT node number * - * @return CPU node number or error if negative + * Return: CPU node number or error if negative */ int cvmx_fdt_get_cpu_node(const void *fdt_addr, int node);

@@ -308,7 +308,7 @@ int cvmx_fdt_get_cpu_node(const void *fdt_addr, int node); * * @param[in] fdt_addr Address of FDT * - * @return Size of flat device tree in bytes or -1 if error. + * Return: Size of flat device tree in bytes or -1 if error. */ int cvmx_fdt_get_fdt_size(const void *fdt_addr);

@@ -320,7 +320,7 @@ int cvmx_fdt_get_fdt_size(const void *fdt_addr); * @param[in] strlist Array of FDT device compatibility strings, * must end with NULL or empty string. * - * @return 0 if at least one item matches, 1 if no matches + * Return: 0 if at least one item matches, 1 if no matches */ int cvmx_fdt_node_check_compatible_list(const void *fdt_addr, int node, const char *const *strlist);

@@ -332,7 +332,7 @@ int cvmx_fdt_node_check_compatible_list(const void *fdt_addr, int node, const ch * @param strlist Array of FDT device compatibility strings, must * end with NULL or empty string. * - * @return next matching node or -1 if no more matches. + * Return: next matching node or -1 if no more matches. */ int cvmx_fdt_node_offset_by_compatible_list(const void *fdt_addr, int startoffset, const char *const *strlist); @@ -345,7 +345,7 @@ int cvmx_fdt_node_offset_by_compatible_list(const void *fdt_addr, int startoffse * @param of_offset Offset of the parent node of a GPIO device in * the device tree. * - * @return pointer to list of i2c devices starting from the root which + * Return: pointer to list of i2c devices starting from the root which * can include i2c muxes and switches or NULL if error. Note that * all entries are allocated on the heap. * @@ -358,7 +358,7 @@ struct cvmx_fdt_i2c_bus_info *cvmx_fdt_get_i2c_bus(const void *fdt_addr, int of_ * * @param[in] bus bus descriptor * - * @return Octeon twsi bus number or -1 on error + * Return: Octeon twsi bus number or -1 on error */ int cvmx_fdt_i2c_get_root_bus(const struct cvmx_fdt_i2c_bus_info *bus);

@@ -367,7 +367,7 @@ int cvmx_fdt_i2c_get_root_bus(const struct cvmx_fdt_i2c_bus_info *bus); * * @param bus bus to free * - * @return 0 + * Return: 0 */ int cvmx_fdt_free_i2c_bus(struct cvmx_fdt_i2c_bus_info *bus);

@@ -377,7 +377,7 @@ int cvmx_fdt_free_i2c_bus(struct cvmx_fdt_i2c_bus_info *bus); * @param[in] bus i2c bus descriptor to enable or disable * @param enable set to true to enable, false to disable * - * @return 0 for success or -1 for invalid bus + * Return: 0 for success or -1 for invalid bus * * This enables the entire bus including muxes and switches in the path. */ @@ -390,7 +390,7 @@ int cvmx_fdt_enable_i2c_bus(const struct cvmx_fdt_i2c_bus_info *bus, bool enable * @param of_offset node offset for property * @param prop_name name of property * - * @return pointer to GPIO handle or NULL if error + * Return: pointer to GPIO handle or NULL if error */ struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info_phandle(const void *fdt_addr, int of_offset, const char *prop_name); @@ -401,7 +401,7 @@ struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info_phandle(const void *fdt_addr, * @param pin GPIO pin descriptor * @param value value to set it to, 0 or 1 * - * @return 0 on success, -1 on error. + * Return: 0 on success, -1 on error. * * NOTE: If the CVMX_GPIO_ACTIVE_LOW flag is set then the output value will be * inverted. @@ -413,7 +413,7 @@ int cvmx_fdt_gpio_set(struct cvmx_fdt_gpio_info *pin, int value); * * @param pin GPIO pin descriptor * - * @return 0 if low, 1 if high, -1 on error. Note that the input will be + * Return: 0 if low, 1 if high, -1 on error. Note that the input will be * inverted if the CVMX_GPIO_ACTIVE_LOW flag bit is set. */ int cvmx_fdt_gpio_get(struct cvmx_fdt_gpio_info *pin); @@ -424,7 +424,7 @@ int cvmx_fdt_gpio_get(struct cvmx_fdt_gpio_info *pin); * @param sfp Handle to SFP data structure * @param ipd_port Port to assign it to * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int cvmx_sfp_set_ipd_port(struct cvmx_fdt_sfp_info *sfp, int ipd_port);

@@ -433,7 +433,7 @@ int cvmx_sfp_set_ipd_port(struct cvmx_fdt_sfp_info *sfp, int ipd_port); * * @param[in] sfp Handle to SFP data structure * - * @return IPD port number for SFP slot + * Return: IPD port number for SFP slot */ static inline int cvmx_sfp_get_ipd_port(const struct cvmx_fdt_sfp_info *sfp) { @@ -469,7 +469,7 @@ void cvmx_sfp_attach_phy(struct cvmx_fdt_sfp_info *sfp, struct cvmx_phy_info *ph * * @param[in] sfp SFP to get phy info from * - * @return phy descriptor or NULL if none. + * Return: phy descriptor or NULL if none. */ static inline struct cvmx_phy_info *cvmx_sfp_get_phy_info(const struct cvmx_fdt_sfp_info *sfp) { @@ -482,7 +482,7 @@ static inline struct cvmx_phy_info *cvmx_sfp_get_phy_info(const struct cvmx_fdt_ * * @param[in] fdt_addr Address of flat device tree * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ int __cvmx_fdt_parse_vsc7224(const void *fdt_addr);

@@ -492,7 +492,7 @@ int __cvmx_fdt_parse_vsc7224(const void *fdt_addr); * * @param[in] fdt_addr Address of flat device tree * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ int __cvmx_fdt_parse_avsp5410(const void *fdt_addr);

@@ -501,7 +501,7 @@ int __cvmx_fdt_parse_avsp5410(const void *fdt_addr); * * @param[in] fdt_addr Address of flat device tree * - * @return pointer to sfp info or NULL if error + * Return: pointer to sfp info or NULL if error */ struct cvmx_fdt_sfp_info *cvmx_helper_fdt_parse_sfp_info(const void *fdt_addr, int of_offset);

@@ -512,7 +512,7 @@ struct cvmx_fdt_sfp_info *cvmx_helper_fdt_parse_sfp_info(const void *fdt_addr, i * @param of_offset offset of slice or phy in device tree * @param phy_info phy_info data structure to fill in * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int cvmx_fdt_parse_cs4343(const void *fdt_addr, int of_offset, struct cvmx_phy_info *phy_info);

@@ -533,7 +533,7 @@ void cvmx_fdt_i2c_reg_write(int bus, int addr, u8 val); * @param bus i2c bus number * @param addr i2c device address (7 bits) * - * @return 8-bit value or error if negative + * Return: 8-bit value or error if negative */ int cvmx_fdt_i2c_reg_read(int bus, int addr);

@@ -545,7 +545,7 @@ int cvmx_fdt_i2c_reg_read(int bus, int addr); * @param reg i2c 8-bit register address * @param val 8-bit value to write * - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ int cvmx_fdt_i2c_write8(int bus, int addr, int reg, u8 val);

@@ -556,7 +556,7 @@ int cvmx_fdt_i2c_write8(int bus, int addr, int reg, u8 val); * @param addr i2c device address (7 bits) * @param reg i2c 8-bit register address * - * @return value or error if negative + * Return: value or error if negative */ int cvmx_fdt_i2c_read8(int bus, int addr, int reg);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h index 8b3a89bce4..766cb074a5 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-fpa.h @@ -29,7 +29,7 @@ * @param dfa_buffers * DFA command buffer. A relatively small (32 for example) * number should work. - * @return Zero on success, non-zero if out of memory + * Return: Zero on success, non-zero if out of memory */ int cvmx_helper_initialize_fpa(int packet_buffers, int work_queue_entries, int pko_buffers, int tim_buffers, int dfa_buffers); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h index 787eccf4aa..b63f654eda 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-gpio.h @@ -272,7 +272,7 @@ struct cvmx_fdt_gpio_led { * @param[in] fdt_addr Pointer to FDT * @param phandle phandle of GPIO entry * - * @return Pointer to op function or NULL if not found. + * Return: Pointer to op function or NULL if not found. */ cvmx_fdt_gpio_op_func_t cvmx_fdt_gpio_get_op_func(const void *fdt_addr, int phandle);

@@ -283,7 +283,7 @@ cvmx_fdt_gpio_op_func_t cvmx_fdt_gpio_get_op_func(const void *fdt_addr, int phan * @param phandle phandle to GPIO * @param[out] size Number of pins (optional, may be NULL) * - * @return Type of GPIO device or PIN_ERROR if error + * Return: Type of GPIO device or PIN_ERROR if error */ enum cvmx_gpio_type cvmx_fdt_get_gpio_type(const void *fdt_addr, int phandle, int *size);

@@ -294,7 +294,7 @@ enum cvmx_gpio_type cvmx_fdt_get_gpio_type(const void *fdt_addr, int phandle, in * @param of_offset node offset of GPIO device * @param prop_name name of property * - * @return pointer to GPIO handle or NULL if error + * Return: pointer to GPIO handle or NULL if error */ struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info(const void *fdt_addr, int of_offset, const char *prop_name); @@ -306,7 +306,7 @@ struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info(const void *fdt_addr, int of_o * @param of_offset node offset for property * @param prop_name name of property * - * @return pointer to GPIO handle or NULL if error + * Return: pointer to GPIO handle or NULL if error */ struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info_phandle(const void *fdt_addr, int of_offset, const char *prop_name); @@ -320,7 +320,7 @@ struct cvmx_fdt_gpio_info *cvmx_fdt_gpio_get_info_phandle(const void *fdt_addr, * @param flags flags set (1 = invert) * @param[out] gpio GPIO info data structure * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int cvmx_fdt_parse_gpio(const void *fdt_addr, int phandle, int pin, u32 flags, struct cvmx_fdt_gpio_info *gpio); @@ -336,7 +336,7 @@ void cvmx_fdt_gpio_set_timer(struct cvmx_fdt_gpio_info *gpio, int timer); * * @param pin GPIO pin descriptor * - * @return 0 if low, 1 if high, -1 on error. Note that the input will be + * Return: 0 if low, 1 if high, -1 on error. Note that the input will be * inverted if the CVMX_GPIO_ACTIVE_LOW flag bit is set. */ int cvmx_fdt_gpio_get(struct cvmx_fdt_gpio_info *pin); @@ -347,7 +347,7 @@ int cvmx_fdt_gpio_get(struct cvmx_fdt_gpio_info *pin); * @param gpio GPIO pin descriptor * @param value value to set it to, 0 or 1 * - * @return 0 on success, -1 on error. + * Return: 0 on success, -1 on error. * * NOTE: If the CVMX_GPIO_ACTIVE_LOW flag is set then the output value will be * inverted. @@ -368,7 +368,7 @@ void cvmx_fdt_gpio_set_freq(struct cvmx_fdt_gpio_info *gpio, int freq); * @param gpio GPIO handle * @param blink True to start blinking, false to stop * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error * NOTE: Not all GPIO types support blinking. */ int cvmx_fdt_gpio_set_blink(struct cvmx_fdt_gpio_info *gpio, bool blink); @@ -379,7 +379,7 @@ int cvmx_fdt_gpio_set_blink(struct cvmx_fdt_gpio_info *gpio, bool blink); * @param gpio GPIO handle * @param blink True to start blinking, false to use link status * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error * NOTE: Not all GPIO types support this. */ int cvmx_fdt_gpio_set_link_blink(struct cvmx_fdt_gpio_info *gpio, bool blink); @@ -404,7 +404,7 @@ void cvmx_fdt_gpio_set_output(struct cvmx_fdt_gpio_info *gpio, bool output); * @param gpio GPIO assigned to LED (can be NULL) * @param last Previous LED to build a list * - * @return pointer to LED data structure or NULL if out of memory + * Return: pointer to LED data structure or NULL if out of memory */ struct cvmx_fdt_gpio_led *cvmx_alloc_led(const char *name, int of_offset, struct cvmx_fdt_gpio_info *gpio, @@ -418,7 +418,7 @@ struct cvmx_fdt_gpio_led *cvmx_alloc_led(const char *name, int of_offset, * @param gpio GPIO data structure to use (can be NULL) * @param last Previous LED if this is a group of LEDs * - * @return Pointer to LED data structure or NULL if error + * Return: Pointer to LED data structure or NULL if error */ struct cvmx_fdt_gpio_led *cvmx_fdt_parse_led(const void *fdt_addr, int led_of_offset, struct cvmx_fdt_gpio_info *gpio, diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h index 29af48e7a1..500b5d5409 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-ilk.h @@ -48,7 +48,7 @@ void __cvmx_ilk_write_rx_cal_entry(int interface, int channel, unsigned char pip * * @param xiface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_ilk_probe(int xiface);

@@ -60,7 +60,7 @@ int __cvmx_helper_ilk_probe(int xiface); * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_ilk_enable(int xiface);

@@ -70,7 +70,7 @@ int __cvmx_helper_ilk_enable(int xiface); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_ilk_link_get(int ipd_port);

@@ -85,7 +85,7 @@ cvmx_helper_link_info_t __cvmx_helper_ilk_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_ilk_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h index fa379eaf55..d379d11c5f 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-jtag.h @@ -48,7 +48,7 @@ void cvmx_helper_qlm_jtag_init(void); * @param data Data to shift in. Bit 0 enters the chain first, followed by * bit 1, etc. * - * @return The low order bits of the JTAG chain that shifted out of the + * Return: The low order bits of the JTAG chain that shifted out of the * circle. */ u32 cvmx_helper_qlm_jtag_shift(int qlm, int bits, u32 data); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h index defd95551a..4370738fe2 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-loop.h @@ -17,7 +17,7 @@ * * @param xiface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_loop_probe(int xiface); int __cvmx_helper_loop_enumerate(int xiface); @@ -30,7 +30,7 @@ int __cvmx_helper_loop_enumerate(int xiface); * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_loop_enable(int xiface);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h index 6a600a017c..fe257c912a 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-npi.h @@ -17,7 +17,7 @@ * * @param interface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_npi_probe(int interface);

@@ -29,7 +29,7 @@ int __cvmx_helper_npi_probe(int interface); * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_npi_enable(int xiface);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h index f5933f24fa..ff32dab67b 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h @@ -163,7 +163,7 @@ int cvmx_helper_pki_set_qpg_entry(int node, struct cvmx_pki_qpg_config *qpg_cfg) * @param bp_thresh backpressure threshold. * @param ena_drop enable tail drop. * 1:enable 0:disable - * @return Zero on success. Negative on failure + * Return: Zero on success. Negative on failure */ int cvmx_helper_setup_aura_qos(int node, int aura, bool ena_red, bool ena_drop, u64 pass_thresh, u64 drop_thresh, bool ena_bp, u64 bp_thresh); @@ -177,7 +177,7 @@ int cvmx_helper_setup_aura_qos(int node, int aura, bool ena_red, bool ena_drop, * @param bpid bpid to map. * @param chl_map array of channels to map to that bpid. * @param chl_cnt number of channel/ports to map to that bpid. - * @return Zero on success. Negative on failure + * Return: Zero on success. Negative on failure */ int cvmx_helper_pki_map_aura_chl_bpid(int node, u16 aura, u16 bpid, u16 chl_map[], u16 chl_cnt);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h index ca8d848bd1..f985ce2c24 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-pko3.h @@ -12,7 +12,7 @@ * Covers the common hardware, memory and global configuration. * Per-interface initialization is performed separately. * - * @return 0 on success. + * Return: 0 on success. * */ int cvmx_helper_pko3_init_global(unsigned int node); @@ -29,7 +29,7 @@ int __cvmx_pko3_config_gen_interface(int xiface, u8 subif, u8 num_queues, bool p * Configure and initialize PKO3 for an interface * * @param interface is the interface number to configure - * @return 0 on success. + * Return: 0 on success. * */ int cvmx_helper_pko3_init_interface(int xiface); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h index 2a206a8827..89301362a9 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-rgmii.h @@ -15,7 +15,7 @@ * * @param xiface Interface to probe * - * @return Number of RGMII/GMII/MII ports (0-4). + * Return: Number of RGMII/GMII/MII ports (0-4). */ int __cvmx_helper_rgmii_probe(int xiface);

@@ -35,7 +35,7 @@ void cvmx_helper_rgmii_internal_loopback(int port); * * @param xiface PKO Interface to configure (0 or 1) * - * @return Zero on success + * Return: Zero on success */ int __cvmx_helper_rgmii_enable(int xiface);

@@ -48,7 +48,7 @@ int __cvmx_helper_rgmii_enable(int xiface); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_gmii_link_get(int ipd_port);

@@ -61,7 +61,7 @@ cvmx_helper_link_info_t __cvmx_helper_gmii_link_get(int ipd_port); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port);

@@ -76,7 +76,7 @@ cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_rgmii_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

@@ -92,7 +92,7 @@ int __cvmx_helper_rgmii_link_set(int ipd_port, cvmx_helper_link_info_t link_info * @param enable_external * Non zero if you want external loopback * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal, int enable_external);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h index 6fe55093b2..655bb106cc 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-sfp.h @@ -264,7 +264,7 @@ struct cvmx_sfp_mod_info { * @param i2c_bus i2c bus number to read from for SFP port * @param i2c_addr i2c address to use, 0 for default * - * @return -1 if invalid bus or i2c read error, 0 for success + * Return: -1 if invalid bus or i2c read error, 0 for success */ int cvmx_phy_sfp_read_i2c_eeprom(u8 *buffer, int i2c_bus, int i2c_addr);

@@ -275,7 +275,7 @@ int cvmx_phy_sfp_read_i2c_eeprom(u8 *buffer, int i2c_bus, int i2c_addr); * @param[out] sfp_info Info about SFP module * @param[in] buffer SFP EEPROM buffer to parse * - * @return 0 on success, -1 if error reading EEPROM or if EEPROM corrupt + * Return: 0 on success, -1 if error reading EEPROM or if EEPROM corrupt */ int cvmx_phy_sfp_parse_eeprom(struct cvmx_sfp_mod_info *sfp_info, const u8 *buffer);

@@ -291,7 +291,7 @@ void cvmx_phy_sfp_print_info(const struct cvmx_sfp_mod_info *sfp_info); * * @param sfp sfp handle to read * - * @return 0 for success, -1 on error. + * Return: 0 for success, -1 on error. */ int cvmx_sfp_read_i2c_eeprom(struct cvmx_fdt_sfp_info *sfp);

@@ -300,7 +300,7 @@ int cvmx_sfp_read_i2c_eeprom(struct cvmx_fdt_sfp_info *sfp); * * @param sfp sfp handle * - * @return sfp_info Pointer sfp mod info data structure + * Return: sfp_info Pointer sfp mod info data structure */ const struct cvmx_sfp_mod_info *cvmx_phy_get_sfp_mod_info(const struct cvmx_fdt_sfp_info *sfp);

@@ -311,7 +311,7 @@ const struct cvmx_sfp_mod_info *cvmx_phy_get_sfp_mod_info(const struct cvmx_fdt_ * @param sfp Handle to SFP information. * @param data User-defined data passed to the function * - * @return 0 if absent, 1 if present, -1 on error + * Return: 0 if absent, 1 if present, -1 on error */ int cvmx_sfp_check_mod_abs(struct cvmx_fdt_sfp_info *sfp, void *data);

@@ -323,7 +323,7 @@ int cvmx_sfp_check_mod_abs(struct cvmx_fdt_sfp_info *sfp, void *data); * @param check_mod_abs Function to be called or NULL to remove * @param mod_abs_data User-defined data to be passed to check_mod_abs * - * @return 0 for success + * Return: 0 for success */ int cvmx_sfp_register_check_mod_abs(struct cvmx_fdt_sfp_info *sfp, int (*check_mod_abs)(struct cvmx_fdt_sfp_info *sfp, void *data), @@ -339,7 +339,7 @@ int cvmx_sfp_register_check_mod_abs(struct cvmx_fdt_sfp_info *sfp, * @param mod_abs_changed_data User-defined data passed to * mod_abs_changed * - * @return 0 for success + * Return: 0 for success */ int cvmx_sfp_register_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp, int (*mod_abs_changed)(struct cvmx_fdt_sfp_info *sfp, int val, @@ -352,7 +352,7 @@ int cvmx_sfp_register_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp, * @param sfp Handle to SFP information. * @param data User-defined data passed to the function * - * @return 0 if signal present, 1 if signal absent, -1 on error + * Return: 0 if signal present, 1 if signal absent, -1 on error */ int cvmx_sfp_check_tx_fault(struct cvmx_fdt_sfp_info *sfp, void *data);

@@ -362,7 +362,7 @@ int cvmx_sfp_check_tx_fault(struct cvmx_fdt_sfp_info *sfp, void *data); * @param sfp Handle to SFP information. * @param data User-defined data passed to the function * - * @return 0 if signal present, 1 if signal absent, -1 on error + * Return: 0 if signal present, 1 if signal absent, -1 on error */ int cvmx_sfp_check_rx_los(struct cvmx_fdt_sfp_info *sfp, void *data);

@@ -375,7 +375,7 @@ int cvmx_sfp_check_rx_los(struct cvmx_fdt_sfp_info *sfp, void *data); * @param rx_los_changed_data User-defined data passed to * rx_los_changed * - * @return 0 for success + * Return: 0 for success */ int cvmx_sfp_register_rx_los_changed(struct cvmx_fdt_sfp_info *sfp, int (*rx_los_changed)(struct cvmx_fdt_sfp_info *sfp, int val, @@ -387,7 +387,7 @@ int cvmx_sfp_register_rx_los_changed(struct cvmx_fdt_sfp_info *sfp, * * @param fdt_addr Address of flat device-tree * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int cvmx_sfp_parse_device_tree(const void *fdt_addr);

@@ -396,7 +396,7 @@ int cvmx_sfp_parse_device_tree(const void *fdt_addr); * * @param ipd_port IPD port number to search for * - * @return pointer to SFP data structure or NULL if not found + * Return: pointer to SFP data structure or NULL if not found */ struct cvmx_fdt_sfp_info *cvmx_sfp_find_slot_by_port(int ipd_port);

@@ -405,14 +405,14 @@ struct cvmx_fdt_sfp_info *cvmx_sfp_find_slot_by_port(int ipd_port); * * @param of_offset flat device tree node offset * - * @return pointer to SFP data structure or NULL if not found + * Return: pointer to SFP data structure or NULL if not found */ struct cvmx_fdt_sfp_info *cvmx_sfp_find_slot_by_fdt_node(int of_offset);

/** * Reads the EEPROMs of all SFP modules. * - * @return 0 for success + * Return: 0 for success */ int cvmx_sfp_read_all_modules(void);

@@ -422,7 +422,7 @@ int cvmx_sfp_read_all_modules(void); * @param[in] sfp SFP port to check * @param mode interface mode * - * @return true if module is valid, false if invalid + * Return: true if module is valid, false if invalid * NOTE: This will also toggle the error LED, if present */ bool cvmx_sfp_validate_module(struct cvmx_fdt_sfp_info *sfp, int mode); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h index c5110c9513..0b32a732e3 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-sgmii.h @@ -17,7 +17,7 @@ * * @param xiface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_sgmii_probe(int xiface); int __cvmx_helper_sgmii_enumerate(int xiface); @@ -30,7 +30,7 @@ int __cvmx_helper_sgmii_enumerate(int xiface); * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_sgmii_enable(int xiface);

@@ -43,7 +43,7 @@ int __cvmx_helper_sgmii_enable(int xiface); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port);

@@ -58,7 +58,7 @@ cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_sgmii_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

@@ -74,7 +74,7 @@ int __cvmx_helper_sgmii_link_set(int ipd_port, cvmx_helper_link_info_t link_info * @param enable_external * Non zero if you want external loopback * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int __cvmx_helper_sgmii_configure_loopback(int ipd_port, int enable_internal, int enable_external);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h index cae72f2172..1adc6f7066 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-spi.h @@ -19,7 +19,7 @@ * * @param interface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_spi_probe(int interface); int __cvmx_helper_spi_enumerate(int interface); @@ -32,7 +32,7 @@ int __cvmx_helper_spi_enumerate(int interface); * * @param interface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_spi_enable(int interface);

@@ -45,7 +45,7 @@ int __cvmx_helper_spi_enable(int interface); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port);

@@ -60,7 +60,7 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_spi_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h index 2b7571dced..47db709b69 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-srio.h @@ -16,7 +16,7 @@ * * @param xiface Interface to convert * - * @return Srio link number + * Return: Srio link number */ int __cvmx_helper_srio_port(int xiface);

@@ -28,7 +28,7 @@ int __cvmx_helper_srio_port(int xiface); * * @param xiface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_srio_probe(int xiface);

@@ -40,7 +40,7 @@ int __cvmx_helper_srio_probe(int xiface); * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_srio_enable(int xiface);

@@ -50,7 +50,7 @@ int __cvmx_helper_srio_enable(int xiface); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_srio_link_get(int ipd_port);

@@ -65,7 +65,7 @@ cvmx_helper_link_info_t __cvmx_helper_srio_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_srio_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-util.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-util.h index cf98eaeba4..ffdd8d03e0 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-util.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-util.h @@ -82,7 +82,7 @@ typedef struct cvmx_xiface cvmx_xiface_t; * * @param xiface interface with node information * - * @return struct that contains node and interface number. + * Return: struct that contains node and interface number. */ static inline struct cvmx_xiface cvmx_helper_xiface_to_node_interface(int xiface) { @@ -237,7 +237,7 @@ static inline void cvmx_wqe_pki_free(cvmx_wqe_t *work) * * @param mode Mode to convert * - * @return String + * Return: String */ const char *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t mode);

@@ -252,7 +252,7 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work); /** * Get the version of the CVMX libraries. * - * @return Version string. Note this buffer is allocated statically + * Return: Version string. Note this buffer is allocated statically * and will be shared by all callers. */ const char *cvmx_helper_get_version(void); @@ -266,7 +266,7 @@ const char *cvmx_helper_get_version(void); * @param xiface Interface to configure * @param num_ports Number of ports on the interface * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_setup_gmx(int xiface, int num_ports);

@@ -276,7 +276,7 @@ int __cvmx_helper_setup_gmx(int xiface, int num_ports); * * @param interface * - * @return the number of pko_ports on the interface. + * Return: the number of pko_ports on the interface. */ int __cvmx_helper_get_num_pko_ports(int interface);

@@ -287,7 +287,7 @@ int __cvmx_helper_get_num_pko_ports(int interface); * @param interface Interface to use * @param port Port on the interface * - * @return IPD port number + * Return: IPD port number */ int cvmx_helper_get_ipd_port(int interface, int port);

@@ -298,7 +298,7 @@ int cvmx_helper_get_ipd_port(int interface, int port); * @param interface Interface to use * @param port Port on the interface * - * @return PKO port number and -1 on error. + * Return: PKO port number and -1 on error. */ int cvmx_helper_get_pko_port(int interface, int port);

@@ -308,7 +308,7 @@ int cvmx_helper_get_pko_port(int interface, int port); * * @param interface Interface to use * - * @return IPD/PKO port number + * Return: IPD/PKO port number */ static inline int cvmx_helper_get_first_ipd_port(int interface) { @@ -323,7 +323,7 @@ int cvmx_helper_ports_on_interface(int interface); * * @param interface Interface to use * - * @return IPD/PKO port number + * Return: IPD/PKO port number * * Note: for o68, the last ipd port on an interface does not always equal to * the first plus the number of ports as the ipd ports are not contiguous in @@ -354,7 +354,7 @@ void cvmx_helper_free_packet_data(cvmx_wqe_t *work); * * @param ipd_port IPD/PKO port number * - * @return Interface number + * Return: Interface number */ int cvmx_helper_get_interface_num(int ipd_port);

@@ -364,7 +364,7 @@ int cvmx_helper_get_interface_num(int ipd_port); * * @param ipd_port IPD/PKO port number * - * @return Interface index number + * Return: Interface index number */ int cvmx_helper_get_interface_index_num(int ipd_port);

@@ -374,7 +374,7 @@ int cvmx_helper_get_interface_index_num(int ipd_port); * @param xiface Interface * @param index index of the port in the interface * - * @return port kind on sucicess and -1 on failure + * Return: port kind on sucicess and -1 on failure */ int cvmx_helper_get_pknd(int xiface, int index);

@@ -384,7 +384,7 @@ int cvmx_helper_get_pknd(int xiface, int index); * @param interface Interface * @param port index of the port in the interface * - * @return port kind on sucicess and -1 on failure + * Return: port kind on sucicess and -1 on failure */ int cvmx_helper_get_bpid(int interface, int port);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h index 6ff4576f23..2d9b0bea42 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-xaui.h @@ -17,7 +17,7 @@ * * @param xiface Interface to probe * - * @return Number of ports on the interface. Zero to disable. + * Return: Number of ports on the interface. Zero to disable. */ int __cvmx_helper_xaui_probe(int xiface); int __cvmx_helper_xaui_enumerate(int xiface); @@ -30,7 +30,7 @@ int __cvmx_helper_xaui_enumerate(int xiface); * * @param xiface Interface to bring up * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_xaui_enable(int xiface);

@@ -47,7 +47,7 @@ int __cvmx_helper_xaui_enable(int xiface); * * @param interface Interface to retrain * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_xaui_link_retrain(int interface);

@@ -57,7 +57,7 @@ int cvmx_helper_xaui_link_retrain(int interface); * * @param interface Interface to reinitialize * - * @return 0 on success, negative on failure + * Return: 0 on success, negative on failure */ int cvmx_helper_xaui_link_reinit(int interface);

@@ -70,7 +70,7 @@ int cvmx_helper_xaui_link_reinit(int interface); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port);

@@ -85,7 +85,7 @@ cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

@@ -101,7 +101,7 @@ int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info) * @param enable_external * Non zero if you want external loopback * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int __cvmx_helper_xaui_configure_loopback(int ipd_port, int enable_internal, int enable_external);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper.h b/arch/mips/mach-octeon/include/mach/cvmx-helper.h index b82e201269..caa0c69fc0 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-helper.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-helper.h @@ -134,7 +134,7 @@ enum cvmx_pko_padding { * IPD configuration changes are made if CVMX_HELPER_ENABLE_IPD * is not set in the executive-config.h file. * - * @return 0 on success + * Return: 0 on success * -1 on failure */ int cvmx_helper_ipd_and_packet_input_enable_node(int node); @@ -146,7 +146,7 @@ int cvmx_helper_ipd_and_packet_input_enable(void); * @param wqe_entries The maximum number of work queue entries to be * supported. * - * @return Zero on success, non-zero on failure. + * Return: Zero on success, non-zero on failure. */ int cvmx_helper_initialize_sso(int wqe_entries);

@@ -157,14 +157,14 @@ int cvmx_helper_initialize_sso(int wqe_entries); * @param wqe_entries The maximum number of work queue entries to be * supported. * - * @return Zero on success, non-zero on failure. + * Return: Zero on success, non-zero on failure. */ int cvmx_helper_initialize_sso_node(unsigned int node, int wqe_entries);

/** * Undo the effect of cvmx_helper_initialize_sso(). * - * @return Zero on success, non-zero on failure. + * Return: Zero on success, non-zero on failure. */ int cvmx_helper_uninitialize_sso(void);

@@ -173,7 +173,7 @@ int cvmx_helper_uninitialize_sso(void); * * @param node Node SSO to initialize * - * @return Zero on success, non-zero on failure. + * Return: Zero on success, non-zero on failure. */ int cvmx_helper_uninitialize_sso_node(unsigned int node);

@@ -184,7 +184,7 @@ int cvmx_helper_uninitialize_sso_node(unsigned int node); * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower * priority than the previous. * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_initialize_packet_io_global(void); /** @@ -196,14 +196,14 @@ int cvmx_helper_initialize_packet_io_global(void); * * @param node Node on which to initialize packet io hardware * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_initialize_packet_io_node(unsigned int node);

/** * Does core local initialization for packet io * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_initialize_packet_io_local(void);

@@ -216,7 +216,7 @@ int cvmx_helper_initialize_packet_io_local(void); * buffers used by the packet IO hardware to the FPA so a function emptying the * FPA after shutdown should find all packet buffers in the FPA. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_helper_shutdown_packet_io_global(void);

@@ -228,7 +228,7 @@ int cvmx_helper_shutdown_packet_io_global_cn78xx(int node); /** * Does core local shutdown of packet io * - * @return Zero on success, non-zero on failure + * Return: Zero on success, non-zero on failure */ int cvmx_helper_shutdown_packet_io_local(void);

@@ -239,7 +239,7 @@ int cvmx_helper_shutdown_packet_io_local(void); * * @param interface Which interface to return port count for. * - * @return Port count for interface + * Return: Port count for interface * -1 for uninitialized interface */ int cvmx_helper_ports_on_interface(int interface); @@ -250,7 +250,7 @@ int cvmx_helper_ports_on_interface(int interface); * but the CNX0XX and CNX1XX are exceptions. These only support * one interface. * - * @return Number of interfaces on chip + * Return: Number of interfaces on chip */ int cvmx_helper_get_number_of_interfaces(void);

@@ -261,7 +261,7 @@ int cvmx_helper_get_number_of_interfaces(void); * * @param xiface Interface to probe * - * @return Mode of the interface. Unknown or unsupported interfaces return + * Return: Mode of the interface. Unknown or unsupported interfaces return * DISABLED. */ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int xiface); @@ -273,7 +273,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int xiface); * * @param ipd_port IPD/PKO port to auto configure * - * @return Link state after configure + * Return: Link state after configure */ cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port);

@@ -285,7 +285,7 @@ cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port); * * @param ipd_port IPD/PKO port to query * - * @return Link state + * Return: Link state */ cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port);

@@ -299,7 +299,7 @@ cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port); * @param ipd_port IPD/PKO port to configure * @param link_info The new link state * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info);

@@ -312,7 +312,7 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info); * * @param xiface Interface to probe * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_interface_probe(int xiface);

@@ -322,7 +322,7 @@ int cvmx_helper_interface_probe(int xiface); * * @param xiface Interface to enumerate * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_helper_interface_enumerate(int xiface);

@@ -337,7 +337,7 @@ int cvmx_helper_interface_enumerate(int xiface); * @param enable_external * Non zero if you want external loopback * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int cvmx_helper_configure_loopback(int ipd_port, int enable_internal, int enable_external);

@@ -346,7 +346,7 @@ int cvmx_helper_configure_loopback(int ipd_port, int enable_internal, int enable * * @param interface Which interface to return port count for. * - * @return Port count for interface + * Return: Port count for interface * -1 for uninitialized interface */ int __cvmx_helper_early_ports_on_interface(int interface); @@ -404,7 +404,7 @@ static inline u8 cvmx_helper_prio2qos(u8 prio) * * @param xiface * - * @return the number of ipd_ports on the interface and -1 for error. + * Return: the number of ipd_ports on the interface and -1 for error. */ int __cvmx_helper_get_num_ipd_ports(int xiface);

@@ -419,7 +419,7 @@ enum cvmx_pko_padding __cvmx_helper_get_pko_padding(int xiface); * @param pad The padding that PKO should apply. * interface. * - * @return 0 for success and -1 for failure + * Return: 0 for success and -1 for failure */ int __cvmx_helper_init_interface(int xiface, int num_ipd_ports, int has_fcs, enum cvmx_pko_padding pad); @@ -434,14 +434,14 @@ void __cvmx_helper_shutdown_interfaces(void); * hardware ports. PKO should still be disabled to make sure packets * aren't sent out partially setup hardware. * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int __cvmx_helper_packet_hardware_enable(int xiface);

/* * @INTERNAL * - * @return 0 for success and -1 for failure + * Return: 0 for success and -1 for failure */ int __cvmx_helper_set_link_info(int xiface, int index, cvmx_helper_link_info_t link_info);

@@ -451,7 +451,7 @@ int __cvmx_helper_set_link_info(int xiface, int index, cvmx_helper_link_info_t l * @param xiface * @param port * - * @return valid link_info on success or -1 on failure + * Return: valid link_info on success or -1 on failure */ cvmx_helper_link_info_t __cvmx_helper_get_link_info(int xiface, int port);

@@ -460,7 +460,7 @@ cvmx_helper_link_info_t __cvmx_helper_get_link_info(int xiface, int port); * * @param xiface * - * @return 0 if PKO does not do FCS and 1 otherwise. + * Return: 0 if PKO does not do FCS and 1 otherwise. */ int __cvmx_helper_get_has_fcs(int xiface);

@@ -513,7 +513,7 @@ typedef struct cvmx_qos_config { * Initialize QoS configuraiton with the SDK defaults. * * @param qos_cfg User QOS configuration parameters. - * @return Zero on success, negative number otherwise. + * Return: Zero on success, negative number otherwise. */ int cvmx_helper_qos_config_init(cvmx_qos_proto_t qos_proto, cvmx_qos_config_t *qos_cfg);

@@ -523,7 +523,7 @@ int cvmx_helper_qos_config_init(cvmx_qos_proto_t qos_proto, cvmx_qos_config_t *q * * @param xipdport Global IPD port * @param qos_cfg User QOS configuration parameters. - * @return Zero on success, negative number otherwise. + * Return: Zero on success, negative number otherwise. */ int cvmx_helper_qos_port_config_update(int xipdport, cvmx_qos_config_t *qos_cfg);

@@ -534,7 +534,7 @@ int cvmx_helper_qos_port_config_update(int xipdport, cvmx_qos_config_t *qos_cfg) * * @param xipdport Global IPD port * @param qos_cfg User QOS configuration parameters. - * @return Zero on success, negative number otherwise. + * Return: Zero on success, negative number otherwise. */ int cvmx_helper_qos_port_setup(int xipdport, cvmx_qos_config_t *qos_cfg);

@@ -545,7 +545,7 @@ int cvmx_helper_qos_port_setup(int xipdport, cvmx_qos_config_t *qos_cfg); * * @param node OCTEON3 node number. * @param qos_cfg User QOS configuration parameters. - * @return Zero on success, negative number otherwise. + * Return: Zero on success, negative number otherwise. */ int cvmx_helper_qos_sso_setup(int node, cvmx_qos_config_t *qos_cfg);

@@ -554,7 +554,7 @@ int cvmx_helper_qos_sso_setup(int node, cvmx_qos_config_t *qos_cfg); * @param chan Channel index. * @param namebuf Name buffer (output). * @param buflen Name maximum length. - * @return Length of name (in bytes) on success, negative number otherwise. + * Return: Length of name (in bytes) on success, negative number otherwise. */ int cvmx_helper_get_chan_e_name(int chan, char *namebuf, int buflen);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-hwfau.h b/arch/mips/mach-octeon/include/mach/cvmx-hwfau.h index 59772190aa..967d6ee5ca 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-hwfau.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-hwfau.h @@ -111,7 +111,7 @@ typedef union { * - Step by 2 for 16 bit access. * - Step by 4 for 32 bit access. * - Step by 8 for 64 bit access. - * @return Address to store for atomic update + * Return: Address to store for atomic update */ static inline u64 __cvmx_hwfau_store_address(u64 noadd, u64 reg) { @@ -135,7 +135,7 @@ static inline u64 __cvmx_hwfau_store_address(u64 noadd, u64 reg) * @param value Signed value to add. * Note: When performing 32 and 64 bit access, only the low * 22 bits are available. - * @return Address to read from for atomic update + * Return: Address to read from for atomic update */ static inline u64 __cvmx_hwfau_atomic_address(u64 tagwait, u64 reg, s64 value) { @@ -152,7 +152,7 @@ static inline u64 __cvmx_hwfau_atomic_address(u64 tagwait, u64 reg, s64 value) * - Step by 8 for 64 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return Value of the register before the update + * Return: Value of the register before the update */ static inline s64 cvmx_hwfau_fetch_and_add64(cvmx_fau_reg64_t reg, s64 value) { @@ -166,7 +166,7 @@ static inline s64 cvmx_hwfau_fetch_and_add64(cvmx_fau_reg64_t reg, s64 value) * - Step by 4 for 32 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return Value of the register before the update + * Return: Value of the register before the update */ static inline s32 cvmx_hwfau_fetch_and_add32(cvmx_fau_reg32_t reg, s32 value) { @@ -180,7 +180,7 @@ static inline s32 cvmx_hwfau_fetch_and_add32(cvmx_fau_reg32_t reg, s32 value) * @param reg FAU atomic register to access. 0 <= reg < 2048. * - Step by 2 for 16 bit access. * @param value Signed value to add. - * @return Value of the register before the update + * Return: Value of the register before the update */ static inline s16 cvmx_hwfau_fetch_and_add16(cvmx_fau_reg16_t reg, s16 value) { @@ -193,7 +193,7 @@ static inline s16 cvmx_hwfau_fetch_and_add16(cvmx_fau_reg16_t reg, s16 value) * * @param reg FAU atomic register to access. 0 <= reg < 2048. * @param value Signed value to add. - * @return Value of the register before the update + * Return: Value of the register before the update */ static inline int8_t cvmx_hwfau_fetch_and_add8(cvmx_fau_reg8_t reg, int8_t value) { @@ -209,7 +209,7 @@ static inline int8_t cvmx_hwfau_fetch_and_add8(cvmx_fau_reg8_t reg, int8_t value * - Step by 8 for 64 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return If a timeout occurs, the error bit will be set. Otherwise + * Return: If a timeout occurs, the error bit will be set. Otherwise * the value of the register before the update will be * returned */ @@ -232,7 +232,7 @@ static inline cvmx_fau_tagwait64_t cvmx_hwfau_tagwait_fetch_and_add64(cvmx_fau_r * - Step by 4 for 32 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return If a timeout occurs, the error bit will be set. Otherwise + * Return: If a timeout occurs, the error bit will be set. Otherwise * the value of the register before the update will be * returned */ @@ -255,7 +255,7 @@ static inline cvmx_fau_tagwait32_t cvmx_hwfau_tagwait_fetch_and_add32(cvmx_fau_r * @param reg FAU atomic register to access. 0 <= reg < 2048. * - Step by 2 for 16 bit access. * @param value Signed value to add. - * @return If a timeout occurs, the error bit will be set. Otherwise + * Return: If a timeout occurs, the error bit will be set. Otherwise * the value of the register before the update will be * returned */ @@ -277,7 +277,7 @@ static inline cvmx_fau_tagwait16_t cvmx_hwfau_tagwait_fetch_and_add16(cvmx_fau_r * * @param reg FAU atomic register to access. 0 <= reg < 2048. * @param value Signed value to add. - * @return If a timeout occurs, the error bit will be set. Otherwise + * Return: If a timeout occurs, the error bit will be set. Otherwise * the value of the register before the update will be * returned */ @@ -314,7 +314,7 @@ static inline cvmx_fau_tagwait8_t cvmx_hwfau_tagwait_fetch_and_add8(cvmx_fau_reg * - Step by 2 for 16 bit access. * - Step by 4 for 32 bit access. * - Step by 8 for 64 bit access. - * @return Data to write using cvmx_send_single + * Return: Data to write using cvmx_send_single */ static inline u64 __cvmx_fau_iobdma_data(u64 scraddr, s64 value, u64 tagwait, cvmx_fau_op_size_t size, u64 reg) @@ -337,7 +337,7 @@ static inline u64 __cvmx_fau_iobdma_data(u64 scraddr, s64 value, u64 tagwait, * - Step by 8 for 64 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_fetch_and_add64(u64 scraddr, cvmx_fau_reg64_t reg, s64 value) { @@ -354,7 +354,7 @@ static inline void cvmx_hwfau_async_fetch_and_add64(u64 scraddr, cvmx_fau_reg64_ * - Step by 4 for 32 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_fetch_and_add32(u64 scraddr, cvmx_fau_reg32_t reg, s32 value) { @@ -370,7 +370,7 @@ static inline void cvmx_hwfau_async_fetch_and_add32(u64 scraddr, cvmx_fau_reg32_ * @param reg FAU atomic register to access. 0 <= reg < 2048. * - Step by 2 for 16 bit access. * @param value Signed value to add. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_fetch_and_add16(u64 scraddr, cvmx_fau_reg16_t reg, s16 value) { @@ -385,7 +385,7 @@ static inline void cvmx_hwfau_async_fetch_and_add16(u64 scraddr, cvmx_fau_reg16_ * Must be 8 byte aligned. * @param reg FAU atomic register to access. 0 <= reg < 2048. * @param value Signed value to add. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_fetch_and_add8(u64 scraddr, cvmx_fau_reg8_t reg, int8_t value) { @@ -405,7 +405,7 @@ static inline void cvmx_hwfau_async_fetch_and_add8(u64 scraddr, cvmx_fau_reg8_t * - Step by 8 for 64 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_tagwait_fetch_and_add64(u64 scraddr, cvmx_fau_reg64_t reg, s64 value) @@ -426,7 +426,7 @@ static inline void cvmx_hwfau_async_tagwait_fetch_and_add64(u64 scraddr, cvmx_fa * - Step by 4 for 32 bit access. * @param value Signed value to add. * Note: Only the low 22 bits are available. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_tagwait_fetch_and_add32(u64 scraddr, cvmx_fau_reg32_t reg, s32 value) @@ -446,7 +446,7 @@ static inline void cvmx_hwfau_async_tagwait_fetch_and_add32(u64 scraddr, cvmx_fa * @param reg FAU atomic register to access. 0 <= reg < 2048. * - Step by 2 for 16 bit access. * @param value Signed value to add. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_tagwait_fetch_and_add16(u64 scraddr, cvmx_fau_reg16_t reg, s16 value) @@ -465,7 +465,7 @@ static inline void cvmx_hwfau_async_tagwait_fetch_and_add16(u64 scraddr, cvmx_fa * returned * @param reg FAU atomic register to access. 0 <= reg < 2048. * @param value Signed value to add. - * @return Placed in the scratch pad register + * Return: Placed in the scratch pad register */ static inline void cvmx_hwfau_async_tagwait_fetch_and_add8(u64 scraddr, cvmx_fau_reg8_t reg, int8_t value) @@ -574,28 +574,28 @@ static inline void cvmx_hwfau_atomic_write8(cvmx_fau_reg8_t reg, int8_t value) }

/** Allocates 64bit FAU register. - * @return value is the base address of allocated FAU register + * Return: value is the base address of allocated FAU register */ int cvmx_fau64_alloc(int reserve);

/** Allocates 32bit FAU register. - * @return value is the base address of allocated FAU register + * Return: value is the base address of allocated FAU register */ int cvmx_fau32_alloc(int reserve);

/** Allocates 16bit FAU register. - * @return value is the base address of allocated FAU register + * Return: value is the base address of allocated FAU register */ int cvmx_fau16_alloc(int reserve);

/** Allocates 8bit FAU register. - * @return value is the base address of allocated FAU register + * Return: value is the base address of allocated FAU register */ int cvmx_fau8_alloc(int reserve);

/** Frees the specified FAU register. * @param address Base address of register to release. - * @return 0 on success; -1 on failure + * Return: 0 on success; -1 on failure */ int cvmx_fau_free(int address);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-hwpko.h b/arch/mips/mach-octeon/include/mach/cvmx-hwpko.h index 459c19bbc0..fe0296653a 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-hwpko.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-hwpko.h @@ -270,7 +270,7 @@ static inline void cvmx_pko_send_packet_prepare(u64 port __attribute__((unused)) * @param use_locking * CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE * - * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output + * Return: returns CVMX_PKO_SUCCESS on success, or error code on failure of output */ static inline cvmx_pko_return_value_t cvmx_hwpko_send_packet_finish(u64 ipd_port, u64 queue, cvmx_pko_command_word0_t pko_command, @@ -313,7 +313,7 @@ cvmx_hwpko_send_packet_finish(u64 ipd_port, u64 queue, cvmx_pko_command_word0_t * @param use_locking * CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE * - * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output + * Return: returns CVMX_PKO_SUCCESS on success, or error code on failure of output */ static inline cvmx_pko_return_value_t cvmx_hwpko_send_packet_finish3(u64 ipd_port, u64 queue, cvmx_pko_command_word0_t pko_command, @@ -358,7 +358,7 @@ int cvmx_pko_get_num_pko_ports(int interface, int index); * for the port. * * @param port IPD port number - * @return Base output queue + * Return: Base output queue */ int cvmx_pko_get_base_queue(int port);

@@ -366,7 +366,7 @@ int cvmx_pko_get_base_queue(int port); * For a given port number, return the number of pko output queues. * * @param port IPD port number - * @return Number of output queues + * Return: Number of output queues */ int cvmx_pko_get_num_queues(int port);

@@ -407,7 +407,7 @@ void cvmx_pko_get_port_status(u64 ipd_port, u64 clear, cvmx_pko_port_status_t *s * @param burst Maximum number of packets to burst in a row before rate * limiting cuts in. * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst);

@@ -420,7 +420,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst); * @param burst Maximum number of bits to burst before rate * limiting cuts in. * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_pko_rate_limit_bits(int port, u64 bits_s, int burst);

@@ -432,7 +432,7 @@ int cvmx_pko_rate_limit_bits(int port, u64 bits_s, int burst); * @param interface * @param index * - * @return negative on error. + * Return: negative on error. * * This applies only to the non-loopback interfaces. * @@ -444,7 +444,7 @@ int __cvmx_pko_get_pipe(int interface, int index); * for the port. * * @param pko_port PKO port number - * @return Base output queue + * Return: Base output queue */ int cvmx_pko_get_base_queue_pkoid(int pko_port);

@@ -453,7 +453,7 @@ int cvmx_pko_get_base_queue_pkoid(int pko_port); * for the port. * * @param pko_port PKO port number - * @return the number of output queues + * Return: the number of output queues */ int cvmx_pko_get_num_queues_pkoid(int pko_port);

@@ -495,7 +495,7 @@ static inline void cvmx_pko_doorbell_pkoid(u64 pko_port, u64 queue, u64 len) * @param use_locking * CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE * - * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output + * Return: returns CVMX_PKO_SUCCESS on success, or error code on failure of output */ static inline cvmx_pko_return_value_t cvmx_hwpko_send_packet_finish_pkoid(int pko_port, u64 queue, cvmx_pko_command_word0_t pko_command, @@ -533,7 +533,7 @@ cvmx_hwpko_send_packet_finish_pkoid(int pko_port, u64 queue, cvmx_pko_command_wo * @param use_locking * CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE * - * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output + * Return: returns CVMX_PKO_SUCCESS on success, or error code on failure of output */ static inline cvmx_pko_return_value_t cvmx_hwpko_send_packet_finish3_pkoid(u64 pko_port, u64 queue, cvmx_pko_command_word0_t pko_command, @@ -561,7 +561,7 @@ cvmx_hwpko_send_packet_finish3_pkoid(u64 pko_port, u64 queue, cvmx_pko_command_w * Obtain the number of PKO commands pending in a queue * * @param queue is the queue identifier to be queried - * @return the number of commands pending transmission or -1 on error + * Return: the number of commands pending transmission or -1 on error */ int cvmx_pko_queue_pend_count(cvmx_cmd_queue_id_t queue);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-ipd.h b/arch/mips/mach-octeon/include/mach/cvmx-ipd.h index cdff36fffb..f4a008f41a 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-ipd.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-ipd.h @@ -213,7 +213,7 @@ void cvmx_ipd_set_wqe_pool_buffer_count(u64 buffer_count); * @param drop_thresh * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. - * @return Zero on success. Negative on failure + * Return: Zero on success. Negative on failure */ int cvmx_ipd_setup_red_queue(int queue, int pass_thresh, int drop_thresh);

@@ -226,7 +226,7 @@ int cvmx_ipd_setup_red_queue(int queue, int pass_thresh, int drop_thresh); * @param drop_thresh * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. - * @return Zero on success. Negative on failure + * Return: Zero on success. Negative on failure */ int cvmx_ipd_setup_red(int pass_thresh, int drop_thresh);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pcie.h b/arch/mips/mach-octeon/include/mach/cvmx-pcie.h index a819196c02..95ac7f2c93 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pcie.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pcie.h @@ -74,7 +74,7 @@ typedef union { * * @param pcie_port PCIe port the IO is for * - * @return 64bit Octeon IO base address for read/write + * Return: 64bit Octeon IO base address for read/write */ u64 cvmx_pcie_get_io_base_address(int pcie_port);

@@ -84,7 +84,7 @@ u64 cvmx_pcie_get_io_base_address(int pcie_port); * * @param pcie_port PCIe port the IO is for * - * @return Size of the IO window + * Return: Size of the IO window */ u64 cvmx_pcie_get_io_size(int pcie_port);

@@ -94,7 +94,7 @@ u64 cvmx_pcie_get_io_size(int pcie_port); * * @param pcie_port PCIe port the IO is for * - * @return 64bit Octeon IO base address for read/write + * Return: 64bit Octeon IO base address for read/write */ u64 cvmx_pcie_get_mem_base_address(int pcie_port);

@@ -104,7 +104,7 @@ u64 cvmx_pcie_get_mem_base_address(int pcie_port); * * @param pcie_port PCIe port the IO is for * - * @return Size of the Mem window + * Return: Size of the Mem window */ u64 cvmx_pcie_get_mem_size(int pcie_port);

@@ -113,7 +113,7 @@ u64 cvmx_pcie_get_mem_size(int pcie_port); * * @param pcie_port PCIe port to initialize * - * @return Zero on success + * Return: Zero on success */ int cvmx_pcie_rc_initialize(int pcie_port);

@@ -122,7 +122,7 @@ int cvmx_pcie_rc_initialize(int pcie_port); * * @param pcie_port PCIe port to shutdown * - * @return Zero on success + * Return: Zero on success */ int cvmx_pcie_rc_shutdown(int pcie_port);

@@ -135,7 +135,7 @@ int cvmx_pcie_rc_shutdown(int pcie_port); * @param fn Device sub function * @param reg Register to access * - * @return Result of the read + * Return: Result of the read */ u8 cvmx_pcie_config_read8(int pcie_port, int bus, int dev, int fn, int reg);

@@ -148,7 +148,7 @@ u8 cvmx_pcie_config_read8(int pcie_port, int bus, int dev, int fn, int reg); * @param fn Device sub function * @param reg Register to access * - * @return Result of the read + * Return: Result of the read */ u16 cvmx_pcie_config_read16(int pcie_port, int bus, int dev, int fn, int reg);

@@ -161,7 +161,7 @@ u16 cvmx_pcie_config_read16(int pcie_port, int bus, int dev, int fn, int reg); * @param fn Device sub function * @param reg Register to access * - * @return Result of the read + * Return: Result of the read */ u32 cvmx_pcie_config_read32(int pcie_port, int bus, int dev, int fn, int reg);

@@ -208,7 +208,7 @@ void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, int reg, * @param pcie_port PCIe port to read from * @param cfg_offset Address to read * - * @return Value read + * Return: Value read */ u32 cvmx_pcie_cfgx_read(int pcie_port, u32 cfg_offset); u32 cvmx_pcie_cfgx_read_node(int node, int pcie_port, u32 cfg_offset); @@ -240,7 +240,7 @@ static inline void cvmx_pcie_npei_write32(u64 address, u32 val) * Read a 32bit value from the Octeon NPEI register space * * @param address Address to read - * @return The result + * Return: The result */ static inline u32 cvmx_pcie_npei_read32(u64 address) { @@ -252,7 +252,7 @@ static inline u32 cvmx_pcie_npei_read32(u64 address) * * @param pcie_port PCIe port to initialize * - * @return Zero on success + * Return: Zero on success */ int cvmx_pcie_ep_initialize(int pcie_port);

@@ -272,7 +272,7 @@ void cvmx_pcie_wait_for_pending(int pcie_port); * * @param pcie_port PCIe port number (PEM number) * - * @return 0 if PCIe port is in target mode, !0 if in host mode. + * Return: 0 if PCIe port is in target mode, !0 if in host mode. */ int cvmx_pcie_is_host_mode(int pcie_port);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pip.h b/arch/mips/mach-octeon/include/mach/cvmx-pip.h index 013f533fb7..828604aa7b 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pip.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pip.h @@ -946,7 +946,7 @@ static inline void cvmx_pip_bsel_config(int bit, int offset, int skip) /** * Get the entry for the Bit Select Extractor Table. * @param work pointer to work queue entry - * @return Index of the Bit Select Extractor Table + * Return: Index of the Bit Select Extractor Table */ static inline int cvmx_pip_get_bsel_table_index(cvmx_wqe_t *work) { diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pki-resources.h b/arch/mips/mach-octeon/include/mach/cvmx-pki-resources.h index 79b99b0bd7..3c60166b99 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pki-resources.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pki-resources.h @@ -14,7 +14,7 @@ * @param style style to allocate, if -1 it will be allocated first available style from style resource. If index is positive number and in range, it will try to allocate specified style. - * @return style number on success, -1 on failure. + * Return: style number on success, -1 on failure. */ int cvmx_pki_style_alloc(int node, int style);

@@ -24,7 +24,7 @@ int cvmx_pki_style_alloc(int node, int style); * @param node node to allocate cluster group from. @param cl_grp cluster group to allocate/reserve, if -1 , allocate any available cluster group. - * @return cluster group number or -1 on failure + * Return: cluster group number or -1 on failure */ int cvmx_pki_cluster_grp_alloc(int node, int cl_grp);

@@ -45,7 +45,7 @@ int cvmx_pki_cluster_alloc(int node, int num_clusters, u64 *cluster_mask); allocate any available pcam entry. * @param bank pcam bank where to allocate/reserve pcan entry from * @param cluster_mask mask of clusters from which pcam entry is needed. - * @return pcam entry of -1 on failure + * Return: pcam entry of -1 on failure */ int cvmx_pki_pcam_entry_alloc(int node, int index, int bank, u64 cluster_mask);

@@ -57,7 +57,7 @@ int cvmx_pki_pcam_entry_alloc(int node, int index, int bank, u64 cluster_mask); number and in range, it will try to allocate specified base_offset. @param count number of consecutive qpg entries to allocate. They will be consecutive from base offset. - * @return qpg table base offset number on success, -1 on failure. + * Return: qpg table base offset number on success, -1 on failure. */ int cvmx_pki_qpg_entry_alloc(int node, int base_offset, int count);

@@ -65,7 +65,7 @@ int cvmx_pki_qpg_entry_alloc(int node, int base_offset, int count); * This function frees a style from pool of global styles per node. * @param node node to free style from. * @param style style to free - * @return 0 on success, -1 on failure. + * Return: 0 on success, -1 on failure. */ int cvmx_pki_style_free(int node, int style);

@@ -74,7 +74,7 @@ int cvmx_pki_style_free(int node, int style); cluster group resources. * @param node node to free cluster group from. @param cl_grp cluster group to free - * @return 0 on success or -1 on failure + * Return: 0 on success or -1 on failure */ int cvmx_pki_cluster_grp_free(int node, int cl_grp);

@@ -86,7 +86,7 @@ int cvmx_pki_cluster_grp_free(int node, int cl_grp); * number and in range, it will try to allocate specified base_offset. * @param count number of consecutive qpg entries to allocate. They will be consecutive * from base offset. - * @return qpg table base offset number on success, -1 on failure. + * Return: qpg table base offset number on success, -1 on failure. */ int cvmx_pki_qpg_entry_free(int node, int base_offset, int count);

@@ -95,7 +95,7 @@ int cvmx_pki_qpg_entry_free(int node, int base_offset, int count); clusters resources. * @param node node to free clusters from. * @param cluster_mask mask of clusters need freeing - * @return 0 on success or -1 on failure + * Return: 0 on success or -1 on failure */ int cvmx_pki_cluster_free(int node, u64 cluster_mask);

@@ -105,7 +105,7 @@ int cvmx_pki_cluster_free(int node, u64 cluster_mask); @param index index of pacm entry (0-191) needs to be freed. * @param bank pcam bank where to free pcam entry from * @param cluster_mask mask of clusters from which pcam entry is freed. - * @return 0 on success OR -1 on failure + * Return: 0 on success OR -1 on failure */ int cvmx_pki_pcam_entry_free(int node, int index, int bank, u64 cluster_mask);

@@ -115,7 +115,7 @@ int cvmx_pki_pcam_entry_free(int node, int index, int bank, u64 cluster_mask); * @param bpid bpid to allocate, if -1 it will be allocated * first available boid from bpid resource. If index is positive * number and in range, it will try to allocate specified bpid. - * @return bpid number on success, + * Return: bpid number on success, * -1 on alloc failure. * -2 on resource already reserved. */ @@ -125,7 +125,7 @@ int cvmx_pki_bpid_alloc(int node, int bpid); * This function frees a bpid from pool of global bpid per node. * @param node node to free bpid from. * @param bpid bpid to free - * @return 0 on success, -1 on failure or + * Return: 0 on success, -1 on failure or */ int cvmx_pki_bpid_free(int node, int bpid);

@@ -138,7 +138,7 @@ int cvmx_pki_bpid_free(int node, int bpid); * This function allocates/reserves an index from pool of global MTAG-IDX per node. * @param node node to allocate index from. * @param idx index to allocate, if -1 it will be allocated - * @return MTAG index number on success, + * Return: MTAG index number on success, * -1 on alloc failure. * -2 on resource already reserved. */ @@ -148,7 +148,7 @@ int cvmx_pki_mtag_idx_alloc(int node, int idx); * This function frees an index from pool of global MTAG-IDX per node. * @param node node to free bpid from. * @param bpid bpid to free - * @return 0 on success, -1 on failure or + * Return: 0 on success, -1 on failure or */ int cvmx_pki_mtag_idx_free(int node, int idx);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pko-internal-ports-range.h b/arch/mips/mach-octeon/include/mach/cvmx-pko-internal-ports-range.h index 1fb49b3fb6..77dd33c1d8 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pko-internal-ports-range.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pko-internal-ports-range.h @@ -14,7 +14,7 @@ * are requested. * @param count the number of internal ports requested * - * @return 0 on success + * Return: 0 on success * -1 on failure */ int cvmx_pko_internal_ports_alloc(int interface, int port, u64 count); @@ -26,7 +26,7 @@ int cvmx_pko_internal_ports_alloc(int interface, int port, u64 count); * @param port the index of the port within in the interface for which the internal ports * are requested. * - * @return 0 on success + * Return: 0 on success * -1 on failure */ int cvmx_pko_internal_ports_free(int interface, int port); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pko3-queue.h b/arch/mips/mach-octeon/include/mach/cvmx-pko3-queue.h index 5f83989049..b3f61d75f2 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pko3-queue.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pko3-queue.h @@ -113,7 +113,7 @@ int __cvmx_pko3_ipd_dq_unregister(int xiface, int index); * The channel assignment applies to L2 or L3 Shaper Queues depending * on the setting of channel credit level. * - * @return returns none. + * Return: returns none. */ void cvmx_pko3_map_channel(unsigned int node, unsigned int pq_num, unsigned int l2_l3_q_num, u16 channel); diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pow.h b/arch/mips/mach-octeon/include/mach/cvmx-pow.h index 0680ca258f..ed9b45fd7a 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-pow.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-pow.h @@ -906,7 +906,7 @@ static inline unsigned int cvmx_sso_num_maskset(void) * If a tag switch is pending this routine returns the tag before * the tag switch, not after. * - * @return Current tag + * Return: Current tag */ static inline cvmx_pow_tag_info_t cvmx_pow_get_current_tag(void) { @@ -967,7 +967,7 @@ static inline cvmx_pow_tag_info_t cvmx_pow_get_current_tag(void) * Get the POW WQE for this core. This returns the work queue * entry currently associated with this core. * - * @return WQE pointer + * Return: WQE pointer */ static inline cvmx_wqe_t *cvmx_pow_get_current_wqp(void) { @@ -1059,7 +1059,7 @@ static inline void cvmx_pow_tag_sw_wait(void) * @param wait When set, call stalls until work becomes available, or * times out. If not set, returns immediately. * - * @return Returns the WQE pointer from POW. Returns NULL if no work was + * Return: Returns the WQE pointer from POW. Returns NULL if no work was * available. */ static inline cvmx_wqe_t *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_t wait) @@ -1099,7 +1099,7 @@ static inline cvmx_wqe_t *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_t wai * @param wait When set, call stalls until work becomes available, or * times out. If not set, returns immediately. * - * @return Returns the WQE pointer from POW. Returns NULL if no work was + * Return: Returns the WQE pointer from POW. Returns NULL if no work was * available. */ static inline cvmx_wqe_t *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait) @@ -1114,7 +1114,7 @@ static inline cvmx_wqe_t *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait) * This function waits for any previous tag switch to complete before * requesting the null_rd. * - * @return Returns the POW state of type cvmx_pow_tag_type_t. + * Return: Returns the POW state of type cvmx_pow_tag_type_t. */ static inline cvmx_pow_tag_type_t cvmx_pow_work_request_null_rd(void) { @@ -1204,7 +1204,7 @@ static inline void cvmx_pow_work_request_async(int scr_addr, cvmx_pow_wait_t wai * * @param scr_addr Scratch memory address to get result from * Byte address, must be 8 byte aligned. - * @return Returns the WQE from the scratch register, or NULL if no work was + * Return: Returns the WQE from the scratch register, or NULL if no work was * available. */ static inline cvmx_wqe_t *cvmx_pow_work_response_async(int scr_addr) @@ -1226,7 +1226,7 @@ static inline cvmx_wqe_t *cvmx_pow_work_response_async(int scr_addr) * * @param wqe_ptr pointer to a work queue entry returned by the POW * - * @return 0 if pointer is valid + * Return: 0 if pointer is valid * 1 if invalid (no work was returned) */ static inline u64 cvmx_pow_work_invalid(cvmx_wqe_t *wqe_ptr) @@ -1735,7 +1735,7 @@ static inline void cvmx_pow_set_group_mask(u64 core_num, u64 mask) * indicates which groups each core will accept work from. * * @param core_num core to apply mask to - * @return Group mask, one bit for up to 64 groups. + * Return: Group mask, one bit for up to 64 groups. * Each 1 bit in the mask enables the core to accept work from * the corresponding group. * The CN68XX supports 64 groups, earlier models only support @@ -2364,7 +2364,7 @@ static inline void cvmx_sso_work_request_grp_async_nocheck(int scr_addr, cvmx_xg * @param wait When set, call stalls until work becomes available, or times out. * If not set, returns immediately. * - * @return Returns the WQE pointer from SSO. + * Return: Returns the WQE pointer from SSO. * Returns NULL if no work was available. */ static inline void *cvmx_sso_work_request_grp_sync_nocheck(unsigned int lgrp, cvmx_pow_wait_t wait) @@ -2403,7 +2403,7 @@ static inline void *cvmx_sso_work_request_grp_sync_nocheck(unsigned int lgrp, cv * @param wait When set, call stalls until work becomes available, or times out. * If not set, returns immediately. * - * @return The WQE pointer or NULL, if work is not available. + * Return: The WQE pointer or NULL, if work is not available. */ static inline void *cvmx_sso_work_request_grp_sync(unsigned int lgrp, cvmx_pow_wait_t wait) { @@ -2829,7 +2829,7 @@ static inline void cvmx_sso_update_wqp_group(cvmx_wqe_t *wqp, u8 xgrp) * @param hw_bits The lower bits (number depends on configuration) are set * to this value. The remainder of bits are set by the sw_bits parameter. * - * @return 32 bit value of the combined hw and sw bits. + * Return: 32 bit value of the combined hw and sw bits. */ static inline u32 cvmx_pow_tag_compose(u64 sw_bits, u64 hw_bits) { @@ -2842,7 +2842,7 @@ static inline u32 cvmx_pow_tag_compose(u64 sw_bits, u64 hw_bits) * * @param tag 32 bit tag value * - * @return N bit software tag value, where N is configurable with + * Return: N bit software tag value, where N is configurable with * the CVMX_TAG_SW_BITS define */ static inline u32 cvmx_pow_tag_get_sw_bits(u64 tag) @@ -2856,7 +2856,7 @@ static inline u32 cvmx_pow_tag_get_sw_bits(u64 tag) * * @param tag 32 bit tag value * - * @return (32 - N) bit software tag value, where N is configurable with + * Return: (32 - N) bit software tag value, where N is configurable with * the CVMX_TAG_SW_BITS define */ static inline u32 cvmx_pow_tag_get_hw_bits(u64 tag) @@ -2905,7 +2905,7 @@ static inline u64 cvmx_sso_get_total_wqe_count(void) * @param buffer Buffer to store capture into * @param buffer_size The size of the supplied buffer * - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */ int cvmx_pow_capture(void *buffer, int buffer_size);

@@ -2920,7 +2920,7 @@ void cvmx_pow_display(void *buffer, int buffer_size); /** * Return the number of POW entries supported by this chip * - * @return Number of POW entries + * Return: Number of POW entries */ int cvmx_pow_get_num_entries(void); int cvmx_pow_get_dump_size(void); @@ -2932,7 +2932,7 @@ int cvmx_pow_get_dump_size(void); * @param node The numa node for the allocation. * @param base_group Pointer to the initial group, -1 to allocate anywhere. * @param count The number of consecutive groups to allocate. - * @return 0 on success and -1 on failure. + * Return: 0 on success and -1 on failure. */ int cvmx_sso_reserve_group_range(int node, int *base_group, int count); #define cvmx_sso_allocate_group_range cvmx_sso_reserve_group_range diff --git a/arch/mips/mach-octeon/include/mach/cvmx-qlm.h b/arch/mips/mach-octeon/include/mach/cvmx-qlm.h index 19915eb82c..7695b69b98 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-qlm.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-qlm.h @@ -32,7 +32,7 @@ typedef struct { /** * Return the number of QLMs supported by the chip * - * @return Number of QLMs + * Return: Number of QLMs */ int cvmx_qlm_get_num(void);

@@ -49,7 +49,7 @@ int cvmx_qlm_interface(int xiface); * @param xiface interface to look up * @param index index in an interface * - * @return the qlm number based on the xiface + * Return: the qlm number based on the xiface */ int cvmx_qlm_lmac(int xiface, int index);

@@ -58,7 +58,7 @@ int cvmx_qlm_lmac(int xiface, int index); * * @param BGX BGX to search for. * - * @return muxes used 0 = DLM5+DLM6, 1 = DLM5, 2 = DLM6. + * Return: muxes used 0 = DLM5+DLM6, 1 = DLM5, 2 = DLM6. */ int cvmx_qlm_mux_interface(int bgx);

@@ -67,14 +67,14 @@ int cvmx_qlm_mux_interface(int bgx); * * @param qlm QLM block to query * - * @return Number of lanes + * Return: Number of lanes */ int cvmx_qlm_get_lanes(int qlm);

/** * Get the QLM JTAG fields based on Octeon model on the supported chips. * - * @return qlm_jtag_field_t structure + * Return: qlm_jtag_field_t structure */ const __cvmx_qlm_jtag_field_t *cvmx_qlm_jtag_get_field(void);

@@ -82,7 +82,7 @@ const __cvmx_qlm_jtag_field_t *cvmx_qlm_jtag_get_field(void); * Get the QLM JTAG length by going through qlm_jtag_field for each * Octeon model that is supported * - * @return return the length. + * Return: return the length. */ int cvmx_qlm_jtag_get_length(void);

@@ -98,7 +98,7 @@ void cvmx_qlm_init(void); * @param lane Lane in QLM to get * @param name String name of field * - * @return JTAG field value + * Return: JTAG field value */ u64 cvmx_qlm_jtag_get(int qlm, int lane, const char *name);

@@ -133,7 +133,7 @@ void __cvmx_qlm_pcie_cfg_rxd_set_tweak(int qlm, int lane); * * @param qlm QLM to examine * - * @return Speed in Mhz + * Return: Speed in Mhz */ int cvmx_qlm_get_gbaud_mhz(int qlm); /** @@ -142,7 +142,7 @@ int cvmx_qlm_get_gbaud_mhz(int qlm); * @param node Target QLM node * @param qlm QLM to examine * - * @return Speed in Mhz + * Return: Speed in Mhz */ int cvmx_qlm_get_gbaud_mhz_node(int node, int qlm);

@@ -250,7 +250,7 @@ int cvmx_qlm_measure_clock(int qlm); * @param node node to measure * @param qlm QLM to measure * - * @return Clock rate in Hz + * Return: Clock rate in Hz */ int cvmx_qlm_measure_clock_node(int node, int qlm);

@@ -261,7 +261,7 @@ int cvmx_qlm_measure_clock_node(int node, int qlm); * @param qlm QLM to perform RX equalization on * @param lane Lane to use, or -1 for all lanes * - * @return Zero on success, negative if any lane failed RX equalization + * Return: Zero on success, negative if any lane failed RX equalization */ int __cvmx_qlm_rx_equalization(int node, int qlm, int lane);

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-regs.h b/arch/mips/mach-octeon/include/mach/cvmx-regs.h index 9e86be8f63..dbb77232e2 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-regs.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-regs.h @@ -295,7 +295,7 @@ static inline void cvmx_write_io(u64 io_addr, u64 val) * * @param major_did 5 bit major did * @param sub_did 3 bit sub did - * @return I/O base address + * Return: I/O base address */ static inline u64 cvmx_build_io_address(u64 major_did, u64 sub_did) { @@ -306,7 +306,7 @@ static inline u64 cvmx_build_io_address(u64 major_did, u64 sub_did) * Builds a bit mask given the required size in bits. * * @param bits Number of bits in the mask - * @return The mask + * Return: The mask */ static inline u64 cvmx_build_mask(u64 bits) { @@ -323,7 +323,7 @@ static inline u64 cvmx_build_mask(u64 bits) * @param lsb Starting bit, least significant (0-63) * @param width Width in bits (1-64) * - * @return Extracted number + * Return: Extracted number */ static inline u64 cvmx_bit_extract(u64 input, int lsb, int width) { @@ -349,7 +349,7 @@ static inline u64 cvmx_bit_extract(u64 input, int lsb, int width) * @param high_bit Highest bit value can occupy (inclusive) 0-63 * @param low_bit Lowest bit value can occupy inclusive 0-high_bit * @param value Value to use - * @return Value masked and shifted + * Return: Value masked and shifted */ static inline u64 cvmx_build_bits(u64 high_bit, u64 low_bit, u64 value) { @@ -379,7 +379,7 @@ static inline u64 cvmx_ptr_to_phys(void *ptr) /** * Number of the Core on which the program is currently running. * - * @return core number + * Return: core number */ static inline unsigned int cvmx_get_core_num(void) { @@ -392,7 +392,7 @@ static inline unsigned int cvmx_get_core_num(void) /** * Node-local number of the core on which the program is currently running. * - * @return core number on local node + * Return: core number on local node */ static inline unsigned int cvmx_get_local_core_num(void) { @@ -411,7 +411,7 @@ static inline unsigned int cvmx_get_local_core_num(void) * * @param val 32 bit value to count set bits in * - * @return Number of bits set + * Return: Number of bits set */ static inline u32 cvmx_pop(u32 val) { diff --git a/arch/mips/mach-octeon/include/mach/cvmx-scratch.h b/arch/mips/mach-octeon/include/mach/cvmx-scratch.h index d567a8453b..960381f987 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-scratch.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-scratch.h @@ -23,7 +23,7 @@ * * @param address byte address to read from * - * @return value read + * Return: value read */ static inline u8 cvmx_scratch_read8(u64 address) { @@ -35,7 +35,7 @@ static inline u8 cvmx_scratch_read8(u64 address) * * @param address byte address to read from * - * @return value read + * Return: value read */ static inline u16 cvmx_scratch_read16(u64 address) { @@ -47,7 +47,7 @@ static inline u16 cvmx_scratch_read16(u64 address) * * @param address byte address to read from * - * @return value read + * Return: value read */ static inline u32 cvmx_scratch_read32(u64 address) { @@ -59,7 +59,7 @@ static inline u32 cvmx_scratch_read32(u64 address) * * @param address byte address to read from * - * @return value read + * Return: value read */ static inline u64 cvmx_scratch_read64(u64 address) { diff --git a/arch/mips/mach-octeon/include/mach/cvmx-wqe.h b/arch/mips/mach-octeon/include/mach/cvmx-wqe.h index c9e3c8312a..7244d5d29c 100644 --- a/arch/mips/mach-octeon/include/mach/cvmx-wqe.h +++ b/arch/mips/mach-octeon/include/mach/cvmx-wqe.h @@ -763,7 +763,7 @@ static inline void cvmx_wqe_set_len(cvmx_wqe_t *work, int len) * * @param work pointer to work queue entry * - * @return 0 if packet had no error, non-zero to indicate error code. + * Return: 0 if packet had no error, non-zero to indicate error code. * * Please refer to HRM for the specific model for full enumaration of error codes. * With Octeon1/Octeon2 models, the returned code indicates L1/L2 errors. @@ -1042,7 +1042,7 @@ static inline int cvmx_wqe_is_l3_mcast(cvmx_wqe_t *work) * For older chips if PIP_GBL_CTL was proviosned to flag ip4_otions and * ipv6 extension, it will be flag them. * @param work pointer to work queue entry - * @return 1 -- If IP error was found in packet + * Return: 1 -- If IP error was found in packet * 0 -- If no IP error was found in packet. */ static inline int cvmx_wqe_is_ip_exception(cvmx_wqe_t *work) @@ -1221,7 +1221,7 @@ static inline cvmx_buf_ptr_pki_t cvmx_wqe_get_pki_pkt_ptr(cvmx_wqe_t *work) /** * Set the buffer segment count for a packet. * - * @return Returns the actual resulting value in the WQE fielda + * Return: Returns the actual resulting value in the WQE fielda * */ static inline unsigned int cvmx_wqe_set_bufs(cvmx_wqe_t *work, unsigned int bufs) @@ -1239,7 +1239,7 @@ static inline unsigned int cvmx_wqe_set_bufs(cvmx_wqe_t *work, unsigned int bufs * Get the offset of Layer-3 header, * only supported when Layer-3 protocol is IPv4 or IPv6. * - * @return Returns the offset, or 0 if the offset is not known or unsupported. + * Return: Returns the offset, or 0 if the offset is not known or unsupported. * * FIXME: Assuming word4 is present. */ @@ -1263,7 +1263,7 @@ static inline unsigned int cvmx_wqe_get_l3_offset(cvmx_wqe_t *work) * or when the Layer-2 header length is modified, and * a subsequent recalculation of checksums is anticipated. * - * @return Returns the actual value of the work entry offset field. + * Return: Returns the actual value of the work entry offset field. * * FIXME: Assuming word4 is present. */ diff --git a/arch/mips/mach-octeon/include/mach/octeon-feature.h b/arch/mips/mach-octeon/include/mach/octeon-feature.h index 2eb1714e90..44eadecf03 100644 --- a/arch/mips/mach-octeon/include/mach/octeon-feature.h +++ b/arch/mips/mach-octeon/include/mach/octeon-feature.h @@ -437,7 +437,7 @@ static inline int octeon_has_feature_OCTEON_FEATURE_PTP(void) /* * Answer ``Is the bit for feature set in the bitmap?'' * @param feature - * @return 1 when the feature is present and 0 otherwise, -1 in case of error. + * Return: 1 when the feature is present and 0 otherwise, -1 in case of error. */ #define octeon_has_feature(feature_x) octeon_has_feature_##feature_x()

diff --git a/arch/mips/mach-octeon/include/mach/octeon-model.h b/arch/mips/mach-octeon/include/mach/octeon-model.h index 9164a4cfd6..c05178f45c 100644 --- a/arch/mips/mach-octeon/include/mach/octeon-model.h +++ b/arch/mips/mach-octeon/include/mach/octeon-model.h @@ -307,7 +307,7 @@ const char *octeon_model_get_string_buffer(u32 chip_id, char *buffer); /** * Return the octeon family, i.e., ProcessorID of the PrID register. * - * @return the octeon family on success, ((u32)-1) on error. + * Return: the octeon family on success, ((u32)-1) on error. */ static inline u32 cvmx_get_octeon_family(void) { diff --git a/arch/mips/mach-octeon/include/mach/octeon_eth.h b/arch/mips/mach-octeon/include/mach/octeon_eth.h index bfef0a6e9f..096fcfbfcf 100644 --- a/arch/mips/mach-octeon/include/mach/octeon_eth.h +++ b/arch/mips/mach-octeon/include/mach/octeon_eth.h @@ -115,7 +115,7 @@ void octeon_eth_register_phy_port_check(struct eth_device *dev, * * @param dev Ethernet device for phy * - * @return 0 to continue, or -1 for error to stop setting up the phy + * Return: 0 to continue, or -1 for error to stop setting up the phy */ int octeon_eth_board_post_setup_phy(struct eth_device *dev);

diff --git a/arch/mips/mach-octeon/include/mach/octeon_fdt.h b/arch/mips/mach-octeon/include/mach/octeon_fdt.h index 31878cb233..db0e28b6dd 100644 --- a/arch/mips/mach-octeon/include/mach/octeon_fdt.h +++ b/arch/mips/mach-octeon/include/mach/octeon_fdt.h @@ -52,7 +52,7 @@ enum octeon_gpio_type { * reg = <0> then the interface will be renamed after this function to * interface@0. * - * @return 0 for success. + * Return: 0 for success. */ int octeon_fdt_patch_rename(void *fdt, const char *fdt_key, const char *trim_name, bool rename, void (*callback)(void *fdt, int offset, void *arg), void *cbarg); @@ -85,7 +85,7 @@ int octeon_fdt_patch_rename(void *fdt, const char *fdt_key, const char *trim_nam * reg = <0> then the interface will be renamed after this function to * interface@0. * - * @return 0 for success. + * Return: 0 for success. */ int octeon_fdt_patch(void *fdt, const char *fdt_key, const char *trim_name);

@@ -150,7 +150,7 @@ int octeon_fdt_compat_vendor(const void *fdt, int nodeoffset, const char *vendor * @param fdt pointer to flat device tree * @param nodeoffset node offset to get OCX node for * - * @return the Octeon OCX node number + * Return: the Octeon OCX node number */ int octeon_fdt_get_soc_node(const void *fdt, int nodeoffset);

@@ -161,7 +161,7 @@ int octeon_fdt_get_soc_node(const void *fdt, int nodeoffset); * @param node_offset Node offset in device tree * @param[in] strlist Array of FDT devices to check, end must be NULL * - * @return 0 if at least one device is compatible, 1 if not compatible. + * Return: 0 if at least one device is compatible, 1 if not compatible. */ int octeon_fdt_node_check_compatible(const void *fdt, int node_offset, const char *const *strlist); /** @@ -170,7 +170,7 @@ int octeon_fdt_node_check_compatible(const void *fdt, int node_offset, const cha * @param[in] fdt Pointer to flat device tree * @param node_offset Node offset in device tree * - * @return i2c bus number or -1 if error + * Return: i2c bus number or -1 if error */ int octeon_fdt_i2c_get_bus(const void *fdt, int node_offset);

@@ -182,7 +182,7 @@ int octeon_fdt_i2c_get_bus(const void *fdt, int node_offset); * @param[out] bus i2c bus number of device * @param[out] addr address of device on i2c bus * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int octeon_fdt_get_i2c_bus_addr(const void *fdt, int node, int *bus, int *addr);

@@ -194,7 +194,7 @@ int octeon_fdt_get_i2c_bus_addr(const void *fdt, int node, int *bus, int *addr); * @param phandle phandle of GPIO node * @param pin pin number to read * - * @return 0 = pin is low, 1 = pin is high, -1 = error + * Return: 0 = pin is low, 1 = pin is high, -1 = error */ int octeon_fdt_read_gpio(const void *fdt, int phandle, int pin);

@@ -207,7 +207,7 @@ int octeon_fdt_read_gpio(const void *fdt, int phandle, int pin); * @param pin pin number to read * @param val value to write (1 = high, 0 = low) * - * @return 0 = success, -1 = error + * Return: 0 = success, -1 = error */ int octeon_fdt_set_gpio(const void *fdt, int phandle, int pin, int val);

@@ -221,7 +221,7 @@ int octeon_fdt_set_gpio(const void *fdt, int phandle, int pin, int val); * @param[out] addr i2c address of SFP EEPROM * @param[out] mod_abs Set true if module is absent, false if present * - * @return 0 for success, -1 if there are problems with the device tree + * Return: 0 for success, -1 if there are problems with the device tree */ int octeon_fdt_get_sfp_eeprom(const void *fdt, int mac_node, int *bus, int *addr, bool *mod_abs);

@@ -235,7 +235,7 @@ int octeon_fdt_get_sfp_eeprom(const void *fdt, int mac_node, int *bus, int *addr * @param[out] addr i2c address of SFP eeprom * @param[out] mod_abs Set true if module is absent, false if present * - * @return 0 for success, -1 if there are problems with the device tree + * Return: 0 for success, -1 if there are problems with the device tree */ int octeon_fdt_get_qsfp_eeprom(const void *fdt, int mac_node, int *bus, int *addr, bool *mod_abs);

@@ -249,7 +249,7 @@ int octeon_fdt_get_qsfp_eeprom(const void *fdt, int mac_node, int *bus, int *add * @param[out] i2c_bus For i2c GPIO expanders, the i2c bus number * @param[out] i2c_addr For i2c GPIO expanders, the i2c address * - * @return 0 for success, -1 for errors + * Return: 0 for success, -1 for errors * * NOTE: It is up to the caller to determine the pin number. */ @@ -262,7 +262,7 @@ int octeon_fdt_get_gpio_info(int fdt_node, enum octeon_gpio_type *type, int *i2c * @param fdt_node FDT node of phy * @param[out] type Type of GPIO * - * @return pointer to phy device or NULL if no match found. + * Return: pointer to phy device or NULL if no match found. */ struct phy_device *octeon_fdt_get_phy_gpio_info(int fdt_node, enum octeon_gpio_type *type); #endif /* __OCTEON_FDT_H__ */ diff --git a/arch/mips/mach-octeon/include/mach/octeon_pci.h b/arch/mips/mach-octeon/include/mach/octeon_pci.h index 3034f23dc6..e28f5f9ee3 100644 --- a/arch/mips/mach-octeon/include/mach/octeon_pci.h +++ b/arch/mips/mach-octeon/include/mach/octeon_pci.h @@ -61,7 +61,7 @@ u32 octeon_pci_bus_to_phys(u32 bus); * @param pf - PCIe config space pf num * @param[out] id - override device and vendor ID * - * @return 0 if override found, 1 if not found. + * Return: 0 if override found, 1 if not found. */ int octeon_find_pcie_id_override(unsigned int address, unsigned int pf, u32 *id);

diff --git a/arch/mips/mach-octeon/include/mach/octeon_qlm.h b/arch/mips/mach-octeon/include/mach/octeon_qlm.h index 219625b256..e51343636f 100644 --- a/arch/mips/mach-octeon/include/mach/octeon_qlm.h +++ b/arch/mips/mach-octeon/include/mach/octeon_qlm.h @@ -36,7 +36,7 @@ * 1: QLMC_REF_CLK0 * 2: QLMC_REF_CLK1 * - * @return Return 0 on success or -1. + * Return: Return 0 on success or -1. * * @note When the 161MHz clock is used it can only be used for * XLAUI mode with a 6316 speed or XFI mode with a 103125 speed. diff --git a/arch/mips/mach-octeon/octeon_fdt.c b/arch/mips/mach-octeon/octeon_fdt.c index 199f692516..9b16104ba7 100644 --- a/arch/mips/mach-octeon/octeon_fdt.c +++ b/arch/mips/mach-octeon/octeon_fdt.c @@ -121,7 +121,7 @@ static const char * const octeon_gpio_list[] = { * reg = <0> then the interface will be renamed after this function to * interface@0. * - * @return 0 for success. + * Return: 0 for success. */ int __octeon_fdt_patch(void *fdt, const char *fdt_key, const char *trim_name) { @@ -164,7 +164,7 @@ int octeon_fdt_patch(void *fdt, const char *fdt_key, const char *trim_name) * reg = <0> then the interface will be renamed after this function to * interface@0. * - * @return 0 for success. + * Return: 0 for success. */ int octeon_fdt_patch_rename(void *fdt, const char *fdt_key, const char *trim_name, bool rename, @@ -648,7 +648,7 @@ int octeon_fdt_compat_vendor(const void *fdt, int nodeoffset, const char *vendor * @param fdt pointer to flat device tree * @param nodeoffset node offset to get OCX node for * - * @return the Octeon OCX node number + * Return: the Octeon OCX node number */ int octeon_fdt_get_soc_node(const void *fdt, int nodeoffset) { @@ -662,7 +662,7 @@ int octeon_fdt_get_soc_node(const void *fdt, int nodeoffset) * @param node_offset Node offset in device tree * @param[in] strlist Array of FDT devices to check, end must be NULL * - * @return 0 if at least one device is compatible, 1 if not compatible. + * Return: 0 if at least one device is compatible, 1 if not compatible. */ int octeon_fdt_node_check_compatible(const void *fdt, int node_offset, const char *const *strlist) @@ -685,7 +685,7 @@ int octeon_fdt_node_check_compatible(const void *fdt, int node_offset, * @param[in] fdt Pointer to flat device tree * @param node_offset Node offset in device tree * - * @return i2c bus number or -1 if error + * Return: i2c bus number or -1 if error */ int octeon_fdt_i2c_get_bus(const void *fdt, int node_offset) { @@ -742,7 +742,7 @@ int octeon_fdt_i2c_get_bus(const void *fdt, int node_offset) * @param[out] bus i2c bus number of device * @param[out] addr address of device on i2c bus * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ int octeon_fdt_get_i2c_bus_addr(const void *fdt, int node, int *bus, int *addr) { @@ -765,7 +765,7 @@ int octeon_fdt_get_i2c_bus_addr(const void *fdt, int node, int *bus, int *addr) * @param phandle phandle of GPIO node * @param pin pin number to read * - * @return 0 = pin is low, 1 = pin is high, -1 = error + * Return: 0 = pin is low, 1 = pin is high, -1 = error */ int octeon_fdt_read_gpio(const void *fdt, int phandle, int pin) { @@ -847,7 +847,7 @@ int octeon_fdt_read_gpio(const void *fdt, int phandle, int pin) * @param pin pin number to read * @param val value to write (1 = high, 0 = low) * - * @return 0 = success, -1 = error + * Return: 0 = success, -1 = error */ int octeon_fdt_set_gpio(const void *fdt, int phandle, int pin, int val) { @@ -918,7 +918,7 @@ int octeon_fdt_set_gpio(const void *fdt, int phandle, int pin, int val) * @param[out] i2c_bus For i2c GPIO expanders, the i2c bus number * @param[out] i2c_addr For i2c GPIO expanders, the i2c address * - * @return 0 for success, -1 for errors + * Return: 0 for success, -1 for errors * * NOTE: It is up to the caller to determine the pin number. */ @@ -988,7 +988,7 @@ int octeon_fdt_get_gpio_info(int fdt_node, enum octeon_gpio_type *type, * * @param fdt_node FDT node in device tree * - * @return pointer to PHY device or NULL if none found. + * Return: pointer to PHY device or NULL if none found. */ static struct phy_device *octeon_fdt_get_phy_device_from_node(int fdt_node) { @@ -1014,7 +1014,7 @@ static struct phy_device *octeon_fdt_get_phy_device_from_node(int fdt_node) * @param fdt_node FDT node of phy * @param[out] type Type of GPIO * - * @return pointer to phy device or NULL if no match found. + * Return: pointer to phy device or NULL if no match found. */ struct phy_device *octeon_fdt_get_phy_gpio_info(int fdt_node, enum octeon_gpio_type *type) { diff --git a/arch/mips/mach-octeon/octeon_qlm.c b/arch/mips/mach-octeon/octeon_qlm.c index 763692781d..1be7434e78 100644 --- a/arch/mips/mach-octeon/octeon_qlm.c +++ b/arch/mips/mach-octeon/octeon_qlm.c @@ -176,7 +176,7 @@ static void __set_qlm_pcie_mode_61xx(int pcie_port, int root_complex) * SPEED value is ignored in this mode. QLM_SPD is set based on * pcie2x1 value in this mode. * - * @return Return 0 on success or -1. + * Return: Return 0 on success or -1. */ static int octeon_configure_qlm_cn61xx(int qlm, int speed, int mode, int rc, int pcie2x1) { @@ -1882,7 +1882,7 @@ static int __dlmx_setup_pcie_cn70xx(int qlm, enum cvmx_qlm_mode mode, int gen2, * @param ref_clk_input The reference-clock input to use to configure QLM * @param ref_clk_sel The reference-clock selection to use to configure QLM * - * @return Return 0 on success or -1. + * Return: Return 0 on success or -1. */ static int octeon_configure_qlm_cn70xx(int qlm, int speed, int mode, int rc, int gen2, int ref_clk_sel, int ref_clk_input) @@ -2168,7 +2168,7 @@ void octeon_qlm_dfe_disable(int node, int qlm, int lane, int baud_mhz, int mode) * @param ctle_zero Equalizer Peaking control * @param agc_pre_ctle Pre-CTLE gain * @param agc_post_ctle Post-CTLE gain - * @return Zero on success, negative on failure + * Return: Zero on success, negative on failure */

int octeon_qlm_dfe_disable_ctle_agc(int node, int qlm, int lane, int baud_mhz, int mode, @@ -3278,7 +3278,7 @@ static const struct refclk_settings_cn78xx refclk_settings_cn78xx[R_NUM_LANE_MOD * @param ref_clk_sel 0 = 100MHz, 1 = 125MHz, 2 = 156.25MHz, * 3 = 161.1328125MHz * - * @return 0 for success or -1 if the reference clock selector is not supported + * Return: 0 for success or -1 if the reference clock selector is not supported * * NOTE: This must be called before __qlm_setup_pll_cn78xx. */ @@ -3624,7 +3624,7 @@ static void __qlm_setup_pll_cn78xx(int node, int qlm) * @param[out] alt_pll_settings If non-NULL this will be set if non-default PLL * settings are required for the mode. * - * @return lane mode to use or -1 on error + * Return: lane mode to use or -1 on error * * NOTE: In some modes */ @@ -4103,7 +4103,7 @@ static void __setup_pem_reset(int node, int pem, int is_endpoint) * 3 = REF_161MHZ * @param ref_clk_input The reference-clock input to use to configure QLM * - * @return Return 0 on success or -1. + * Return: Return 0 on success or -1. */ int octeon_configure_qlm_cn78xx(int node, int qlm, int baud_mhz, int mode, int rc, int gen3, int ref_clk_sel, int ref_clk_input) @@ -4629,7 +4629,7 @@ static int __is_qlm_valid_bgx_cn73xx(int qlm) * 1 = common reference clock input 0 * 2 = common reference clock input 1 * - * @return Return 0 on success or -1. + * Return: Return 0 on success or -1. */ static int octeon_configure_qlm_cn73xx(int qlm, int baud_mhz, int mode, int rc, int gen3, int ref_clk_sel, int ref_clk_input) @@ -5339,7 +5339,7 @@ static int __rmac_pll_config(int baud_mhz, int qlm, int mode) * 3 = REF_122MHZ * @param ref_clk_input The reference-clock input to use to configure QLM * - * @return Return 0 on success or -1. + * Return: Return 0 on success or -1. */ static int octeon_configure_qlm_cnf75xx(int qlm, int baud_mhz, int mode, int rc, int gen3, int ref_clk_sel, int ref_clk_input) @@ -5788,7 +5788,7 @@ static int octeon_configure_qlm_cnf75xx(int qlm, int baud_mhz, int mode, int rc, * 1: QLMC_REF_CLK0 * 2: QLMC_REF_CLK1 * - * @return Return 0 on success or -1. + * Return: Return 0 on success or -1. */ int octeon_configure_qlm(int qlm, int speed, int mode, int rc, int pcie_mode, int ref_clk_sel, int ref_clk_input) diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c index 5229949951..1101b9138f 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c @@ -70,7 +70,7 @@ static void pamu_setup_default_xfer_to_host_spaace(struct paace *spaace) then snoopid not defined * @param[in] subwin_cnt number of sub-windows * - * @return Returns 0 upon success else error code < 0 returned + * Return: Returns 0 upon success else error code < 0 returned */ static int pamu_config_ppaace(uint32_t liodn, uint64_t win_addr, uint64_t win_size, uint32_t omi, diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h index 2dae0800ce..4284a332e9 100644 --- a/arch/riscv/include/asm/smp.h +++ b/arch/riscv/include/asm/smp.h @@ -54,7 +54,7 @@ void handle_ipi(ulong hart); * @arg0: First argument of function * @arg1: Second argument of function * @wait: Wait for harts to acknowledge request - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait);

@@ -65,7 +65,7 @@ int smp_call_function(ulong addr, ulong arg0, ulong arg1, int wait); * the cpu driver is initialized. No other riscv_*_ipi() calls will be made * before this function is called. * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int riscv_init_ipi(void);

@@ -75,7 +75,7 @@ int riscv_init_ipi(void); * Platform code must provide this function. * * @hart: Hart ID of receiving hart - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int riscv_send_ipi(int hart);

@@ -85,7 +85,7 @@ int riscv_send_ipi(int hart); * Platform code must provide this function. * * @hart: Hart ID of hart to be cleared - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int riscv_clear_ipi(int hart);

@@ -97,7 +97,7 @@ int riscv_clear_ipi(int hart); * @hart: Hart ID of hart to be checked * @pending: Pointer to variable with result of the check, * 1 if IPI is pending, 0 otherwise - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int riscv_get_ipi(int hart, int *pending);

diff --git a/arch/riscv/include/asm/spl.h b/arch/riscv/include/asm/spl.h index 1487f2d910..e8a94fcb1f 100644 --- a/arch/riscv/include/asm/spl.h +++ b/arch/riscv/include/asm/spl.h @@ -31,7 +31,7 @@ enum { /** * spl_board_init_f() - initialize board in the SPL phase * - * @return 0 if succeeded, -ve on error + * Return: 0 if succeeded, -ve on error */ int spl_board_init_f(void);

diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c index 9887d09272..ff0fa8a685 100644 --- a/arch/sandbox/cpu/cpu.c +++ b/arch/sandbox/cpu/cpu.c @@ -73,7 +73,7 @@ int cleanup_before_linux_select(int flags) * which we can use to map back to the pointer later. * * @ptr: Pointer to check - * @return true if this is within sandbox emulated DRAM, false if not + * Return: true if this is within sandbox emulated DRAM, false if not */ static bool is_in_sandbox_mem(const void *ptr) { diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 40ebe322ae..d83c862182 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -718,7 +718,7 @@ static int make_exec(char *fname, const void *data, int size) * @argvp: Returns newly allocated args list * @add_args: Arguments to add, each a string * @count: Number of arguments in @add_args - * @return 0 if OK, -ENOMEM if out of memory + * Return: 0 if OK, -ENOMEM if out of memory */ static int add_args(char ***argvp, char *add_args[], int count) { @@ -764,7 +764,7 @@ static int add_args(char ***argvp, char *add_args[], int count) * execs it. * * @fname: Filename to exec - * @return does not return on success, any return value is an error + * Return: does not return on success, any return value is an error */ static int os_jump_to_file(const char *fname, bool delete_it) { diff --git a/arch/sandbox/cpu/state.c b/arch/sandbox/cpu/state.c index 4e822538ba..ce904b1740 100644 --- a/arch/sandbox/cpu/state.c +++ b/arch/sandbox/cpu/state.c @@ -101,7 +101,7 @@ err_open: * @state: Sandbox state * @io: Method to use for reading state * @blob: FDT containing state - * @return 0 if OK, -EINVAL if the read function returned failure + * Return: 0 if OK, -EINVAL if the read function returned failure */ int sandbox_read_state_nodes(struct sandbox_state *state, struct sandbox_state_io *io, const void *blob) @@ -190,7 +190,7 @@ int sandbox_read_state(struct sandbox_state *state, const char *fname) * * @state: Sandbox state * @io: Method to use for writing state - * @return 0 if OK, -EIO if there is a fatal error (such as out of space + * Return: 0 if OK, -EIO if there is a fatal error (such as out of space * for adding the data), -EINVAL if the write function failed. */ int sandbox_write_state_node(struct sandbox_state *state, diff --git a/arch/sandbox/include/asm/eth.h b/arch/sandbox/include/asm/eth.h index b313bf57c6..f042a5f3b9 100644 --- a/arch/sandbox/include/asm/eth.h +++ b/arch/sandbox/include/asm/eth.h @@ -23,7 +23,7 @@ void sandbox_eth_skip_timeout(void); * @dev: device that received the packet * @packet: pointer to the received pacaket buffer * @len: length of received packet - * @return 0 if injected, -EAGAIN if not + * Return: 0 if injected, -EAGAIN if not */ int sandbox_eth_arp_req_to_reply(struct udevice *dev, void *packet, unsigned int len); @@ -36,7 +36,7 @@ int sandbox_eth_arp_req_to_reply(struct udevice *dev, void *packet, * @dev: device that received the packet * @packet: pointer to the received pacaket buffer * @len: length of received packet - * @return 0 if injected, -EAGAIN if not + * Return: 0 if injected, -EAGAIN if not */ int sandbox_eth_ping_req_to_reply(struct udevice *dev, void *packet, unsigned int len); @@ -47,7 +47,7 @@ int sandbox_eth_ping_req_to_reply(struct udevice *dev, void *packet, * Inject an ARP request for this target * * @dev: device that received the packet - * @return 0 if injected, -EOVERFLOW if not + * Return: 0 if injected, -EOVERFLOW if not */ int sandbox_eth_recv_arp_req(struct udevice *dev);

@@ -57,7 +57,7 @@ int sandbox_eth_recv_arp_req(struct udevice *dev); * Inject a ping request for this target * * @dev: device that received the packet - * @return 0 if injected, -EOVERFLOW if not + * Return: 0 if injected, -EOVERFLOW if not */ int sandbox_eth_recv_ping_req(struct udevice *dev);

diff --git a/arch/sandbox/include/asm/gpio.h b/arch/sandbox/include/asm/gpio.h index 9542fdee67..0dd4c7bf60 100644 --- a/arch/sandbox/include/asm/gpio.h +++ b/arch/sandbox/include/asm/gpio.h @@ -37,7 +37,7 @@ * * @param dev device to use * @param offset GPIO offset within bank - * @return -1 on error, 0 if GPIO is low, >0 if high + * Return: -1 on error, 0 if GPIO is low, >0 if high */ int sandbox_gpio_get_value(struct udevice *dev, unsigned int offset);

@@ -47,7 +47,7 @@ int sandbox_gpio_get_value(struct udevice *dev, unsigned int offset); * @param dev device to use * @param offset GPIO offset within bank * @param value value to set (0 for low, non-zero for high) - * @return -1 on error, 0 if ok + * Return: -1 on error, 0 if ok */ int sandbox_gpio_set_value(struct udevice *dev, unsigned int offset, int value);

@@ -56,7 +56,7 @@ int sandbox_gpio_set_value(struct udevice *dev, unsigned int offset, int value); * * @param dev device to use * @param offset GPIO offset within bank - * @return -1 on error, 0 if GPIO is input, >0 if output + * Return: -1 on error, 0 if GPIO is input, >0 if output */ int sandbox_gpio_get_direction(struct udevice *dev, unsigned int offset);

@@ -66,7 +66,7 @@ int sandbox_gpio_get_direction(struct udevice *dev, unsigned int offset); * @param dev device to use * @param offset GPIO offset within bank * @param output 0 to set as input, 1 to set as output - * @return -1 on error, 0 if ok + * Return: -1 on error, 0 if ok */ int sandbox_gpio_set_direction(struct udevice *dev, unsigned int offset, int output); @@ -76,7 +76,7 @@ int sandbox_gpio_set_direction(struct udevice *dev, unsigned int offset, * * @param dev device to use * @param offset GPIO offset within bank - * @return dir_flags: bitfield accesses by GPIOD_ defines + * Return: dir_flags: bitfield accesses by GPIOD_ defines */ ulong sandbox_gpio_get_flags(struct udevice *dev, unsigned int offset);

@@ -86,7 +86,7 @@ ulong sandbox_gpio_get_flags(struct udevice *dev, unsigned int offset); * @param dev device to use * @param offset GPIO offset within bank * @param flags bitfield accesses by GPIOD_ defines - * @return -1 on error, 0 if ok + * Return: -1 on error, 0 if ok */ int sandbox_gpio_set_flags(struct udevice *dev, unsigned int offset, ulong flags); diff --git a/arch/sandbox/include/asm/sdl.h b/arch/sandbox/include/asm/sdl.h index 25dbdb5944..e271a849af 100644 --- a/arch/sandbox/include/asm/sdl.h +++ b/arch/sandbox/include/asm/sdl.h @@ -19,7 +19,7 @@ * display will pass 5, since 2*5 = 32 * @double_size: true to double the visible size in each direction for high-DPI * displays - * @return 0 if OK, -ENODEV if no device, -EIO if SDL failed to initialize + * Return: 0 if OK, -ENODEV if no device, -EIO if SDL failed to initialize * and -EPERM if the video failed to come up. */ int sandbox_sdl_init_display(int width, int height, int log2_bpp, @@ -28,7 +28,7 @@ int sandbox_sdl_init_display(int width, int height, int log2_bpp, /** * sandbox_sdl_remove_display() - Remove the SDL screen * - * @return 0 if OK, -ENOENT if the SDL had not been inited. + * Return: 0 if OK, -ENOENT if the SDL had not been inited. */ int sandbox_sdl_remove_display(void);

@@ -39,7 +39,7 @@ int sandbox_sdl_remove_display(void); * user can see it. * * @lcd_base: Base of frame buffer - * @return 0 if screen was updated, -ENODEV is there is no screen. + * Return: 0 if screen was updated, -ENODEV is there is no screen. */ int sandbox_sdl_sync(void *lcd_base);

@@ -50,7 +50,7 @@ int sandbox_sdl_sync(void *lcd_base); * * @key: Array to receive keycodes * @max_keys: Size of array - * @return number of keycodes found, 0 if none, -ENODEV if no keyboard + * Return: number of keycodes found, 0 if none, -ENODEV if no keyboard */ int sandbox_sdl_scan_keys(int key[], int max_keys);

@@ -58,7 +58,7 @@ int sandbox_sdl_scan_keys(int key[], int max_keys); * sandbox_sdl_key_pressed() - check if a particular key is pressed * * @keycode: Keycode to check (KEY_... - see include/linux/input.h - * @return 0 if pressed, -ENOENT if not pressed. -ENODEV if keybord not + * Return: 0 if pressed, -ENOENT if not pressed. -ENODEV if keybord not * available, */ int sandbox_sdl_key_pressed(int keycode); @@ -74,7 +74,7 @@ int sandbox_sdl_sound_play(const void *data, uint count); /** * sandbox_sdl_sound_stop() - stop playing a sound * - * @return 0 if OK, -ENODEV if no sound is available + * Return: 0 if OK, -ENODEV if no sound is available */ int sandbox_sdl_sound_stop(void);

@@ -83,7 +83,7 @@ int sandbox_sdl_sound_stop(void); * * @rate: Sample rate to use * @channels: Number of channels to use (1=mono, 2=stereo) - * @return 0 if OK, -ENODEV if no sound is available + * Return: 0 if OK, -ENODEV if no sound is available */ int sandbox_sdl_sound_init(int rate, int channels);

diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h index 10352a587e..07c768ae5d 100644 --- a/arch/sandbox/include/asm/state.h +++ b/arch/sandbox/include/asm/state.h @@ -134,7 +134,7 @@ struct sandbox_state { * data set for start-of-day. * @param blob: Pointer to device tree blob, or NULL if no data to read * @param node: Node offset to read from - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error * * @write: Function to write state to FDT * The caller will ensure that there is a node ready for the state. The @@ -186,7 +186,7 @@ struct sandbox_state_io { /** * Gets a pointer to the current state. * - * @return pointer to state + * Return: pointer to state */ struct sandbox_state *state_get_current(void);

@@ -198,7 +198,7 @@ struct sandbox_state *state_get_current(void); * * @param state Sandbox state to update * @param fname Filename of device tree file to read from - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int sandbox_read_state(struct sandbox_state *state, const char *fname);

@@ -212,7 +212,7 @@ int sandbox_read_state(struct sandbox_state *state, const char *fname); * * @param state Sandbox state to update * @param fname Filename of device tree file to write to - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int sandbox_write_state(struct sandbox_state *state, const char *fname);

@@ -247,7 +247,7 @@ void state_set_skip_delays(bool skip_delays); /** * See if delays should be skipped * - * @return true if delays should be skipped, false if they should be honoured + * Return: true if delays should be skipped, false if they should be honoured */ bool state_get_skip_delays(void);

@@ -274,7 +274,7 @@ int state_init(void); * Uninitialize the test system state, writing out state if configured to * do so. * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int state_uninit(void);

diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h index 0aad827e9c..0d83f4dc1b 100644 --- a/arch/sandbox/include/asm/test.h +++ b/arch/sandbox/include/asm/test.h @@ -101,7 +101,7 @@ uint sanbox_i2c_eeprom_get_prev_offset(struct udevice *dev); * @use_system_time: true to use system time, false to use @base_time * @offset: RTC offset from current system/base time (-1 for no * change) - * @return old value of RTC offset + * Return: old value of RTC offset */ long sandbox_i2c_rtc_set_offset(struct udevice *dev, bool use_system_time, int offset); @@ -111,7 +111,7 @@ long sandbox_i2c_rtc_set_offset(struct udevice *dev, bool use_system_time, * * @dev: RTC device to adjust * @base_time: New base system time (set to -1 for no change) - * @return old base time + * Return: old base time */ long sandbox_i2c_rtc_get_set_base_time(struct udevice *dev, long base_time);

@@ -135,7 +135,7 @@ int sandbox_osd_get_mem(struct udevice *dev, u8 *buf, size_t buflen); * @duty_ns: Current duty cycle of the PWM in nanoseconds * @enable: true if the PWM is enabled * @polarity: true if the PWM polarity is active high - * @return 0 if OK, -ENOSPC if the PWM number is invalid + * Return: 0 if OK, -ENOSPC if the PWM number is invalid */ int sandbox_pwm_get_config(struct udevice *dev, uint channel, uint *period_nsp, uint *duty_nsp, bool *enablep, bool *polarityp); @@ -164,7 +164,7 @@ void sandbox_get_codec_params(struct udevice *dev, int *interfacep, int *ratep, * This data is provided to the sandbox driver by the I2S tx_data() method. * * @dev: Device to check - * @return sum of audio data + * Return: sum of audio data */ int sandbox_get_i2s_sum(struct udevice *dev);

@@ -174,14 +174,14 @@ int sandbox_get_i2s_sum(struct udevice *dev); * This is used in the sound test * * @dev: Device to check - * @return call count for the setup() method + * Return: call count for the setup() method */ int sandbox_get_setup_called(struct udevice *dev);

/** * sandbox_get_sound_active() - Returns whether sound play is in progress * - * @return true if active, false if not + * Return: true if active, false if not */ int sandbox_get_sound_active(struct udevice *dev);

@@ -191,7 +191,7 @@ int sandbox_get_sound_active(struct udevice *dev); * This data is provided to the sandbox driver by the sound play() method. * * @dev: Device to check - * @return sum of audio data + * Return: sum of audio data */ int sandbox_get_sound_sum(struct udevice *dev);

@@ -207,7 +207,7 @@ void sandbox_set_allow_beep(struct udevice *dev, bool allow); * sandbox_get_beep_frequency() - Get the frequency of the current beep * * @dev: Device to check - * @return frequency of beep, if there is an active beep, else 0 + * Return: frequency of beep, if there is an active beep, else 0 */ int sandbox_get_beep_frequency(struct udevice *dev);

@@ -215,7 +215,7 @@ int sandbox_get_beep_frequency(struct udevice *dev); * sandbox_spi_get_speed() - Get current speed setting of a sandbox spi bus * * @dev: Device to check - * @return current bus speed + * Return: current bus speed */ uint sandbox_spi_get_speed(struct udevice *dev);

@@ -223,7 +223,7 @@ uint sandbox_spi_get_speed(struct udevice *dev); * sandbox_spi_get_mode() - Get current mode setting of a sandbox spi bus * * @dev: Device to check - * @return current mode + * Return: current mode */ uint sandbox_spi_get_mode(struct udevice *dev);

@@ -231,7 +231,7 @@ uint sandbox_spi_get_mode(struct udevice *dev); * sandbox_get_pch_spi_protect() - Get the PCI SPI protection status * * @dev: Device to check - * @return 0 if not protected, 1 if protected + * Return: 0 if not protected, 1 if protected */ int sandbox_get_pch_spi_protect(struct udevice *dev);

@@ -239,7 +239,7 @@ int sandbox_get_pch_spi_protect(struct udevice *dev); * sandbox_get_pci_ep_irq_count() - Get the PCI EP IRQ count * * @dev: Device to check - * @return irq count + * Return: irq count */ int sandbox_get_pci_ep_irq_count(struct udevice *dev);

@@ -254,7 +254,7 @@ int sandbox_get_pci_ep_irq_count(struct udevice *dev); * @type: Type of BAR (PCI_BASE_ADDRESS_SPACE_IO or * PCI_BASE_ADDRESS_MEM_TYPE_32) * @size: Size of BAR in bytes - * @return BAR value to return from emulator + * Return: BAR value to return from emulator */ uint sandbox_pci_read_bar(u32 barval, int type, uint size);

@@ -283,7 +283,7 @@ void sandbox_cros_ec_set_test_flags(struct udevice *dev, uint flags); * @dev: Device to check * @index: PWM channel index * @duty: Current duty cycle in 0..EC_PWM_MAX_DUTY range. - * @return 0 if OK, -ENOSPC if the PWM number is invalid + * Return: 0 if OK, -ENOSPC if the PWM number is invalid */ int sandbox_cros_ec_get_pwm_duty(struct udevice *dev, uint index, uint *duty);

@@ -298,7 +298,7 @@ int sandbox_cros_ec_get_pwm_duty(struct udevice *dev, uint index, uint *duty); * * @dev: Device to adjust * @l2bpp: depth to set - * @return 0 if the device was already active, other error if it fails to probe + * Return: 0 if the device was already active, other error if it fails to probe * after the change */ int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp); diff --git a/arch/sandbox/include/asm/u-boot-sandbox.h b/arch/sandbox/include/asm/u-boot-sandbox.h index 56dc13c3eb..9eb19323ec 100644 --- a/arch/sandbox/include/asm/u-boot-sandbox.h +++ b/arch/sandbox/include/asm/u-boot-sandbox.h @@ -44,7 +44,7 @@ struct udevice; * @devp: Returns the device which mapped into this space * @ptrp: Returns a pointer to the mapped address. The device's space * can be accessed as @lenp bytes starting here - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_map_physmem(phys_addr_t paddr, unsigned long *lenp, struct udevice **devp, void **ptrp); @@ -57,7 +57,7 @@ int pci_map_physmem(phys_addr_t paddr, unsigned long *lenp, * @paddr: Physical memory address, as passed to pci_map_physmem() * @len: Size of area mapped, as returned by pci_map_physmem() * @dev: Device to unmap, as returned by pci_map_physmem() - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_unmap_physmem(const void *addr, unsigned long len, struct udevice *dev); diff --git a/arch/x86/cpu/apollolake/fsp_bindings.c b/arch/x86/cpu/apollolake/fsp_bindings.c index 319c78b95a..fb75e1f709 100644 --- a/arch/x86/cpu/apollolake/fsp_bindings.c +++ b/arch/x86/cpu/apollolake/fsp_bindings.c @@ -44,7 +44,7 @@ static void read_u8_prop(ofnode node, char *name, size_t count, u8 *dst) * Set to 0 if the property is expected to be a scalar * @dst: Pointer to destination of where to save the value(s) read * from devicetree - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ static int read_u16_prop(ofnode node, char *name, size_t count, u16 *dst) { @@ -196,7 +196,7 @@ static void read_swizzle_prop(ofnode node, char *name, size_t count, u8 *dst) * @fsp_bindings: Binding describing which devicetree properties should * be stored where in the FSP configuration structure * The end of the list is declared by a NULL pointer in propname - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error * * This function reads the configuration for FSP from the provided * devicetree node and saves it in the FSP configuration structure. diff --git a/arch/x86/cpu/broadwell/pch.c b/arch/x86/cpu/broadwell/pch.c index f012db9deb..37fcddbb9b 100644 --- a/arch/x86/cpu/broadwell/pch.c +++ b/arch/x86/cpu/broadwell/pch.c @@ -522,7 +522,7 @@ static void serialio_init_once(bool acpi_mode) /** * pch_serialio_init() - set up serial I/O devices * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int pch_serialio_init(void) { diff --git a/arch/x86/cpu/broadwell/refcode.c b/arch/x86/cpu/broadwell/refcode.c index 6c04dde992..aced3e5e26 100644 --- a/arch/x86/cpu/broadwell/refcode.c +++ b/arch/x86/cpu/broadwell/refcode.c @@ -65,7 +65,7 @@ struct rmodule_header { * platform controller hub (PCH). This function should be implemented by the * CPU-specific code. * - * @return 0 on success, -ve on failure + * Return: 0 on success, -ve on failure */ static int cpu_run_reference_code(void) { diff --git a/arch/x86/cpu/intel_common/lpc.c b/arch/x86/cpu/intel_common/lpc.c index f31fddb6fa..af68c0f079 100644 --- a/arch/x86/cpu/intel_common/lpc.c +++ b/arch/x86/cpu/intel_common/lpc.c @@ -39,7 +39,7 @@ static void enable_port80_on_lpc(struct udevice *pch) * lpc_early_init() - set up LPC serial ports and other early things * * @dev: LPC device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int lpc_common_early_init(struct udevice *dev) { diff --git a/arch/x86/cpu/intel_common/p2sb.c b/arch/x86/cpu/intel_common/p2sb.c index 5a7b30d94a..e4e53f73c0 100644 --- a/arch/x86/cpu/intel_common/p2sb.c +++ b/arch/x86/cpu/intel_common/p2sb.c @@ -46,7 +46,7 @@ * This is needed by FSP-M which uses the High Precision Event Timer. * * @dev: P2SB device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int p2sb_early_init(struct udevice *dev) { diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c index 0540b02161..89312a8634 100644 --- a/arch/x86/cpu/ivybridge/bd82x6x.c +++ b/arch/x86/cpu/ivybridge/bd82x6x.c @@ -39,7 +39,7 @@ static int pch_type = -1; * pch_silicon_revision() - Read silicon revision ID from the PCH * * @dev: PCH device - * @return silicon revision ID + * Return: silicon revision ID */ static int pch_silicon_revision(struct udevice *dev) { @@ -71,7 +71,7 @@ int pch_silicon_type(struct udevice *dev) * @dev: PCH device * @type: PCH type * @rev: Minimum required resion - * @return 0 if not supported, 1 if supported + * Return: 0 if not supported, 1 if supported */ static int pch_silicon_supported(struct udevice *dev, int type, int rev) { diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c index c09762aee6..7637c9b07d 100644 --- a/arch/x86/cpu/mp_init.c +++ b/arch/x86/cpu/mp_init.c @@ -423,7 +423,7 @@ static int apic_wait_timeout(int total_delay, const char *msg) * * @num_aps: Number of APs we expect to find * @ap_count: Initially zero. Incremented by this function for each AP found - * @return 0 if all APs were set up correctly or there are none to set up, + * Return: 0 if all APs were set up correctly or there are none to set up, * -ENOSPC if the SIPI vector is too high in memory, * -ETIMEDOUT if the ICR is busy or the second SIPI fails to complete * -EIO if not all APs check in correctly @@ -536,7 +536,7 @@ static int bsp_do_flight_plan(struct udevice *cpu, struct mp_flight_plan *plan, * * @devp: If non-NULL, returns CPU device corresponding to the BSP * @cpu_countp: If non-NULL, returns the total number of CPUs - * @return CPU number of the BSP, or -ve on error. If multiprocessing is not + * Return: CPU number of the BSP, or -ve on error. If multiprocessing is not * enabled, returns 0 */ static int get_bsp(struct udevice **devp, int *cpu_countp) @@ -573,7 +573,7 @@ static int get_bsp(struct udevice **devp, int *cpu_countp) * pointer to new instructions * * @slot: Pointer to the AP's callback slot - * @return value of that pointer + * Return: value of that pointer */ static struct mp_callback *read_callback(struct mp_callback **slot) { @@ -610,7 +610,7 @@ static void store_callback(struct mp_callback **slot, struct mp_callback *val) * @num_cpus: The number of CPUs in the system (= number of APs + 1) * @expire_ms: Timeout to wait for all APs to finish, in milliseconds, or 0 for * no timeout - * @return 0 if OK, -ETIMEDOUT if one or more APs failed to respond in time + * Return: 0 if OK, -ETIMEDOUT if one or more APs failed to respond in time */ static int run_ap_work(struct mp_callback *callback, struct udevice *bsp, int num_cpus, uint expire_ms) @@ -670,7 +670,7 @@ static int run_ap_work(struct mp_callback *callback, struct udevice *bsp, * * @cpu: CPU that is waiting * @unused: Optional argument provided by struct mp_flight_record, not used here - * @return Does not return + * Return: Does not return */ static int ap_wait_for_instruction(struct udevice *cpu, void *unused) { diff --git a/arch/x86/cpu/mtrr.c b/arch/x86/cpu/mtrr.c index 260a008093..e69dfb552b 100644 --- a/arch/x86/cpu/mtrr.c +++ b/arch/x86/cpu/mtrr.c @@ -109,7 +109,7 @@ static void read_mtrrs(void *arg) /** * mtrr_copy_to_aps() - Copy the MTRRs from the boot CPU to other CPUs * - * @return 0 on success, -ve on failure + * Return: 0 on success, -ve on failure */ static int mtrr_copy_to_aps(void) { diff --git a/arch/x86/cpu/slimbootloader/sdram.c b/arch/x86/cpu/slimbootloader/sdram.c index 36d0d4da55..c6f10e22e3 100644 --- a/arch/x86/cpu/slimbootloader/sdram.c +++ b/arch/x86/cpu/slimbootloader/sdram.c @@ -46,7 +46,7 @@ static struct sbl_memory_map_info *get_memory_map_info(void) * The memory map entries from Slim Bootloader hob are already sorted. * * @total_size: The memory size that u-boot occupies - * @return : The top available memory address lower than 4GB + * Return: : The top available memory address lower than 4GB */ ulong board_get_usable_ram_top(ulong total_size) { diff --git a/arch/x86/include/asm/acpi_table.h b/arch/x86/include/asm/acpi_table.h index d5c8805df3..55b1a3d3f1 100644 --- a/arch/x86/include/asm/acpi_table.h +++ b/arch/x86/include/asm/acpi_table.h @@ -46,7 +46,7 @@ u32 acpi_fill_csrt(u32 current); * Write out the table for High-Precision Event Timers * * @ctx: Current ACPI context - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_write_hpet(struct acpi_ctx *ctx);

@@ -56,7 +56,7 @@ int acpi_write_hpet(struct acpi_ctx *ctx); * @ctx: Current ACPI context * @dev: Debug UART device to describe * @access_size: Access size for UART (e.g. ACPI_ACCESS_SIZE_DWORD_ACCESS) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev, uint access_size); @@ -65,7 +65,7 @@ int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev, * acpi_create_gnvs() - Create a GNVS (Global Non Volatile Storage) table * * @gnvs: Table to fill in - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_create_gnvs(struct acpi_global_nvs *gnvs);

@@ -98,7 +98,7 @@ int arch_write_sci_irq_select(uint scis); * arch_madt_sci_irq_polarity() - Return the priority to use for the MADT * * @sci: System-control interrupt number - * @return priority to use (MP_IRQ_POLARITY_...) + * Return: priority to use (MP_IRQ_POLARITY_...) */ int arch_madt_sci_irq_polarity(int sci);

@@ -155,7 +155,7 @@ void acpi_dmar_rmrr_fixup(struct acpi_ctx *ctx, void *base); * * @ctx: ACPI context pointer * @bdf: PCI device to add - * @return length of mapping in bytes + * Return: length of mapping in bytes */ int acpi_create_dmar_ds_pci(struct acpi_ctx *ctx, pci_dev_t bdf);

@@ -166,7 +166,7 @@ int acpi_create_dmar_ds_pci(struct acpi_ctx *ctx, pci_dev_t bdf); * * @ctx: ACPI context pointer * @bdf: PCI device to add - * @return length of mapping in bytes + * Return: length of mapping in bytes */ int acpi_create_dmar_ds_pci_br(struct acpi_ctx *ctx, pci_dev_t bdf);

@@ -176,7 +176,7 @@ int acpi_create_dmar_ds_pci_br(struct acpi_ctx *ctx, pci_dev_t bdf); * @ctx: ACPI context pointer * @enumeration_id: Enumeration ID (typically 2) * @bdf: PCI device to add - * @return length of mapping in bytes + * Return: length of mapping in bytes */ int acpi_create_dmar_ds_ioapic(struct acpi_ctx *ctx, uint enumeration_id, pci_dev_t bdf); @@ -190,7 +190,7 @@ int acpi_create_dmar_ds_ioapic(struct acpi_ctx *ctx, uint enumeration_id, * @ctx: ACPI context pointer * @enumeration_id: Enumeration ID (typically 0) * @bdf: PCI device to add - * @return length of mapping in bytes + * Return: length of mapping in bytes */ int acpi_create_dmar_ds_msi_hpet(struct acpi_ctx *ctx, uint enumeration_id, pci_dev_t bdf); diff --git a/arch/x86/include/asm/arch-apollolake/fsp_bindings.h b/arch/x86/include/asm/arch-apollolake/fsp_bindings.h index a80e66bbfa..ae1f1b7a43 100644 --- a/arch/x86/include/asm/arch-apollolake/fsp_bindings.h +++ b/arch/x86/include/asm/arch-apollolake/fsp_bindings.h @@ -86,7 +86,7 @@ struct lpddr4_swizzle_cfg { * fsp_m_update_config_from_dtb() - Read FSP-M config from devicetree node * @node: Valid node reference to read property from * @cfg: Pointer to FSP-M config structure - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error * * This function reads the configuration for FSP-M from the provided * devicetree node and saves it in the FSP-M configuration structure. @@ -99,7 +99,7 @@ int fsp_m_update_config_from_dtb(ofnode node, struct fsp_m_config *cfg); * fsp_s_update_config_from_dtb() - Read FSP-S config from devicetree node * @node: Valid node reference to read property from * @cfg: Pointer to FSP-S config structure - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error * * This function reads the configuration for FSP-S from the provided * devicetree node and saves it in the FSP-S configuration structure. diff --git a/arch/x86/include/asm/arch-apollolake/lpc.h b/arch/x86/include/asm/arch-apollolake/lpc.h index 977b7eccd8..51d478ff80 100644 --- a/arch/x86/include/asm/arch-apollolake/lpc.h +++ b/arch/x86/include/asm/arch-apollolake/lpc.h @@ -67,7 +67,7 @@ void lpc_enable_fixed_io_ranges(uint io_enables); * * @base: Base I/O address (e.g. 0x800) * @size: Size of window (e.g. 0x100) - * @return 0 if OK, -ENOSPC if there are no more windows available, -EALREADY + * Return: 0 if OK, -ENOSPC if there are no more windows available, -EALREADY * if already set up */ int lpc_open_pmio_window(uint base, uint size); diff --git a/arch/x86/include/asm/arch-apollolake/systemagent.h b/arch/x86/include/asm/arch-apollolake/systemagent.h index 48e76c2bb0..25dbc9c281 100644 --- a/arch/x86/include/asm/arch-apollolake/systemagent.h +++ b/arch/x86/include/asm/arch-apollolake/systemagent.h @@ -45,7 +45,7 @@ void enable_bios_reset_cpl(void); * below 4GB * * @dev: hostbridge device - * @return TOLUD address + * Return: TOLUD address */ ulong sa_get_tolud_base(struct udevice *dev);

@@ -56,7 +56,7 @@ ulong sa_get_tolud_base(struct udevice *dev); * for Graphics Translation Tables. * * @dev: hostbridge device - * @return GSM address + * Return: GSM address */ ulong sa_get_gsm_base(struct udevice *dev);

@@ -65,7 +65,7 @@ ulong sa_get_gsm_base(struct udevice *dev); * * This returns the top address of DRAM available below 4GB * - * @return TSEG base + * Return: TSEG base */ ulong sa_get_tseg_base(struct udevice *dev);

diff --git a/arch/x86/include/asm/arch-coreboot/timestamp.h b/arch/x86/include/asm/arch-coreboot/timestamp.h index 531526b314..bbf89447dd 100644 --- a/arch/x86/include/asm/arch-coreboot/timestamp.h +++ b/arch/x86/include/asm/arch-coreboot/timestamp.h @@ -17,7 +17,7 @@ void timestamp_add_now(enum timestamp_id id); /** * timestamp_add_to_bootstage - Add important coreboot timestamps to bootstage * - * @return 0 if ok, -1 if no timestamps were found + * Return: 0 if ok, -1 if no timestamps were found */ int timestamp_add_to_bootstage(void);

diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h index 8018bc097d..0c980e547f 100644 --- a/arch/x86/include/asm/arch-ivybridge/pch.h +++ b/arch/x86/include/asm/arch-ivybridge/pch.h @@ -380,7 +380,7 @@ * pch_silicon_revision() - Read silicon device ID from the PCH * * @dev: PCH device - * @return silicon device ID + * Return: silicon device ID */ int pch_silicon_type(struct udevice *dev);

diff --git a/arch/x86/include/asm/arch-ivybridge/sandybridge.h b/arch/x86/include/asm/arch-ivybridge/sandybridge.h index a3a507f2b3..4f2971ccab 100644 --- a/arch/x86/include/asm/arch-ivybridge/sandybridge.h +++ b/arch/x86/include/asm/arch-ivybridge/sandybridge.h @@ -111,7 +111,7 @@ * bridge_silicon_revision() - Get the Northbridge revision * * @dev: Northbridge device - * @return revision ID (bits 3:0) and bridge ID (bits 7:4) + * Return: revision ID (bits 3:0) and bridge ID (bits 7:4) */ int bridge_silicon_revision(struct udevice *dev);

diff --git a/arch/x86/include/asm/bootm.h b/arch/x86/include/asm/bootm.h index bd8ce55729..109f686f74 100644 --- a/arch/x86/include/asm/bootm.h +++ b/arch/x86/include/asm/bootm.h @@ -19,7 +19,7 @@ void bootm_announce_and_cleanup(void); * @image_64bit: true if the image is a raw 64-bit kernel, false if it * is raw 32-bit or any type of self-extracting kernel * such as a bzImage. - * @return -ve error code. This function does not return if the kernel was + * Return: -ve error code. This function does not return if the kernel was * booted successfully. */ int boot_linux_kernel(ulong setup_base, ulong load_address, bool image_64bit); diff --git a/arch/x86/include/asm/cb_sysinfo.h b/arch/x86/include/asm/cb_sysinfo.h index 75901359f9..0201ac6b03 100644 --- a/arch/x86/include/asm/cb_sysinfo.h +++ b/arch/x86/include/asm/cb_sysinfo.h @@ -222,14 +222,14 @@ extern struct sysinfo_t lib_sysinfo; * so. * * @info: Place to put the parsed information - * @return 0 if OK, -ENOENT if no table found + * Return: 0 if OK, -ENOENT if no table found */ int get_coreboot_info(struct sysinfo_t *info);

/** * cb_get_sysinfo() - get a pointer to the parsed coreboot sysinfo * - * @return pointer to sysinfo, or NULL if not available + * Return: pointer to sysinfo, or NULL if not available */ const struct sysinfo_t *cb_get_sysinfo(void);

diff --git a/arch/x86/include/asm/coreboot_tables.h b/arch/x86/include/asm/coreboot_tables.h index a74654bbe3..f131de56a4 100644 --- a/arch/x86/include/asm/coreboot_tables.h +++ b/arch/x86/include/asm/coreboot_tables.h @@ -554,7 +554,7 @@ void write_coreboot_table(u32 addr, struct memory_area *cfg_tables); /** * locate_coreboot_table() - Try to find coreboot tables at standard locations * - * @return address of table that was found, or -ve error number + * Return: address of table that was found, or -ve error number */ long locate_coreboot_table(void);

diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 5b001bbee2..3346012d33 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -205,7 +205,7 @@ void cpu_disable_paging_pae(void); /** * cpu_has_64bit() - Check if the CPU has 64-bit support * - * @return 1 if this CPU supports long mode (64-bit), 0 if not + * Return: 1 if this CPU supports long mode (64-bit), 0 if not */ int cpu_has_64bit(void);

@@ -224,7 +224,7 @@ const char *cpu_vendor_name(int vendor); * cpu_get_name() - Get the name of the current cpu * * @name: Place to put name, which must be CPU_MAX_NAME_LEN bytes including - * @return pointer to name, which will likely be a few bytes after the start + * Return: pointer to name, which will likely be a few bytes after the start * of @name * \0 terminator */ @@ -277,14 +277,14 @@ int cpu_jump_to_64bit_uboot(ulong target); /** * cpu_get_family_model() - Get the family and model for the CPU * - * @return the CPU ID masked with 0x0fff0ff0 + * Return: the CPU ID masked with 0x0fff0ff0 */ u32 cpu_get_family_model(void);

/** * cpu_get_stepping() - Get the stepping value for the CPU * - * @return the CPU ID masked with 0xf + * Return: the CPU ID masked with 0xf */ u32 cpu_get_stepping(void);

@@ -293,7 +293,7 @@ u32 cpu_get_stepping(void); * * This is 32 for older CPUs but newer ones may support 36. * - * @return address size (typically 32 or 36) + * Return: address size (typically 32 or 36) */ int cpu_phys_address_size(void);

diff --git a/arch/x86/include/asm/cpu_common.h b/arch/x86/include/asm/cpu_common.h index e41ceda73a..dd4cf15aed 100644 --- a/arch/x86/include/asm/cpu_common.h +++ b/arch/x86/include/asm/cpu_common.h @@ -22,7 +22,7 @@ struct udevice; * This reports BIST failure, enables the LAPIC, updates microcode, enables * the upper 128-bytes of CROM RAM, probes the northbridge, PCH, LPC and SATA. * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cpu_common_init(void);

@@ -35,7 +35,7 @@ int cpu_common_init(void); * Some details are available here: * http://forum.hwbot.org/showthread.php?t=76092 * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cpu_set_flex_ratio_to_tdp_nominal(void);

@@ -49,7 +49,7 @@ int cpu_set_flex_ratio_to_tdp_nominal(void); * @info: cpu_info struct to fill in * @bclk_mz: the base clock in MHz * - * @return 0 always + * Return: 0 always */ int cpu_intel_get_info(struct cpu_info *info, int bclk_mz);

@@ -60,7 +60,7 @@ int cpu_intel_get_info(struct cpu_info *info, int bclk_mz); * MSR_TEMPERATURE_TARGET value. * * @dev: CPU device - * @return 0 if OK, -ENOENT if no target is given in device tree + * Return: 0 if OK, -ENOENT if no target is given in device tree */ int cpu_configure_thermal_target(struct udevice *dev);

@@ -76,7 +76,7 @@ void cpu_set_perf_control(uint clk_ratio); /** * cpu_config_tdp_levels() - Check for configurable TDP option * - * @return true if the CPU has configurable TDP (Thermal-design power) + * Return: true if the CPU has configurable TDP (Thermal-design power) */ bool cpu_config_tdp_levels(void);

@@ -95,7 +95,7 @@ enum burst_mode_t { * Bit 38 - TURBO_MODE_DISABLE Bit to get state ENABLED / DISABLED. * Also checks cpuid 0x6 to see whether burst mode is supported. * - * @return current burst mode status + * Return: current burst mode status */ enum burst_mode_t cpu_get_burst_mode_state(void);

@@ -134,14 +134,14 @@ void cpu_set_p_state_to_turbo_ratio(void); * * See ACPI spec v6.3 section 8.4.6.5 _PSD (P-State Dependency) * - * @return HW_ALL (always) + * Return: HW_ALL (always) */ int cpu_get_coord_type(void);

/** * cpu_get_min_ratio() - get minimum support frequency ratio for CPU * - * @return minimum ratio + * Return: minimum ratio */ int cpu_get_min_ratio(void);

@@ -151,7 +151,7 @@ int cpu_get_min_ratio(void); * If a nominal TDP ratio is available, it is returned. Otherwise this returns * the maximum non-turbo frequency ratio for this processor * - * @return max ratio + * Return: max ratio */ int cpu_get_max_ratio(void);

@@ -160,28 +160,28 @@ int cpu_get_max_ratio(void); * * This is the value the clock ratio is multiplied with * - * @return bus-block frequency in KHz + * Return: bus-block frequency in KHz */ int cpu_get_bus_clock_khz(void);

/** * cpu_get_power_max() - Get maximum CPU TDP * - * @return maximum CPU TDP (Thermal-design power) in mW + * Return: maximum CPU TDP (Thermal-design power) in mW */ int cpu_get_power_max(void);

/** * cpu_get_max_turbo_ratio() - Get maximum turbo ratio * - * @return maximum ratio + * Return: maximum ratio */ int cpu_get_max_turbo_ratio(void);

/** * cpu_get_cores_per_package() - Get the number of CPU cores in each package * - * @return number of cores + * Return: number of cores */ int cpu_get_cores_per_package(void);

diff --git a/arch/x86/include/asm/cpu_x86.h b/arch/x86/include/asm/cpu_x86.h index 4fd5f03fdc..7d04977996 100644 --- a/arch/x86/include/asm/cpu_x86.h +++ b/arch/x86/include/asm/cpu_x86.h @@ -13,7 +13,7 @@ * like the processor local apic id. * * @dev: Device to check (UCLASS_CPU) - * @return 0 always + * Return: 0 always */ int cpu_x86_bind(struct udevice *dev);

diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 850a0a7a89..1ab709abfc 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -34,7 +34,7 @@ unsigned int install_e820_map(unsigned int max_entries, * * @max_entries: Maximum number of entries to write * @entries: Place to put entires - * @return number of entries written + * Return: number of entries written */ unsigned int cb_install_e820_map(unsigned int max_entries, struct e820_entry *entries); diff --git a/arch/x86/include/asm/fast_spi.h b/arch/x86/include/asm/fast_spi.h index 82e3d8f63e..998847b82c 100644 --- a/arch/x86/include/asm/fast_spi.h +++ b/arch/x86/include/asm/fast_spi.h @@ -61,7 +61,7 @@ check_member(fast_spi_regs, ptdata, 0xd0); * @map_sizep: Returns size of mapped SPI * @offsetp: Returns start offset of SPI flash where the map works * correctly (offsets before this are not visible) - * @return 0 (always) + * Return: 0 (always) */ int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep, uint *offsetp); @@ -74,7 +74,7 @@ int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep, * @map_sizep: Returns size of mapped SPI * @offsetp: Returns start offset of SPI flash where the map works * correctly (offsets before this are not visible) - * @return 0 (always) + * Return: 0 (always) */ int fast_spi_get_bios_mmap_regs(struct fast_spi_regs *regs, ulong *map_basep, uint *map_sizep, uint *offsetp); diff --git a/arch/x86/include/asm/fsp/fsp_support.h b/arch/x86/include/asm/fsp/fsp_support.h index 3cd3e4fcf5..68331ebf6d 100644 --- a/arch/x86/include/asm/fsp/fsp_support.h +++ b/arch/x86/include/asm/fsp/fsp_support.h @@ -23,7 +23,7 @@ /** * fsp_find_header() - Find FSP header offset in FSP image * - * @return the offset of FSP header. If signature is invalid, returns 0. + * Return: the offset of FSP header. If signature is invalid, returns 0. */ struct fsp_header *fsp_find_header(void);

@@ -33,7 +33,7 @@ struct fsp_header *fsp_find_header(void); * @fsp_hdr: Pointer to FSP information header * @phase: FSP initialization phase defined in enum fsp_phase * - * @return compatible status code with EFI_STATUS defined in PI spec + * Return: compatible status code with EFI_STATUS defined in PI spec */ u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase);

@@ -42,7 +42,7 @@ u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase); * * @hob_list: A HOB list pointer. * - * @return Usable low memory top. + * Return: Usable low memory top. */ u32 fsp_get_usable_lowmem_top(const void *hob_list);

@@ -51,7 +51,7 @@ u32 fsp_get_usable_lowmem_top(const void *hob_list); * * @hob_list: A HOB list pointer. * - * @return Usable high memory top. + * Return: Usable high memory top. */ u64 fsp_get_usable_highmem_top(const void *hob_list);

@@ -63,7 +63,7 @@ u64 fsp_get_usable_highmem_top(const void *hob_list); * If the GUID HOB is located, the length will be updated. * @guid: A pointer to the owner guild. * - * @return Reserved region start address. + * Return: Reserved region start address. * 0 if this region does not exist. */ u64 fsp_get_reserved_mem_from_guid(const void *hob_list, @@ -75,7 +75,7 @@ u64 fsp_get_reserved_mem_from_guid(const void *hob_list, * @hob_list: A HOB list pointer. * @len: A pointer to the FSP reserved memory length buffer. * If the GUID HOB is located, the length will be updated. - * @return FSP reserved memory base + * Return: FSP reserved memory base * 0 if this region does not exist. */ u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len); @@ -87,8 +87,8 @@ u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len); * @len: A pointer to the TSEG reserved memory length buffer. * If the GUID HOB is located, the length will be updated. * - * @return NULL: Failed to find the TSEG reserved memory. - * @return others: TSEG reserved memory base. + * Return: NULL: Failed to find the TSEG reserved memory. + * Return: others: TSEG reserved memory base. */ u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len);

@@ -99,8 +99,8 @@ u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len); * @len: A pointer to the NVS data buffer length. * If the HOB is located, the length will be updated. * - * @return NULL: Failed to find the NVS HOB. - * @return others: FSP NVS data buffer pointer. + * Return: NULL: Failed to find the NVS HOB. + * Return: others: FSP NVS data buffer pointer. */ void *fsp_get_nvs_data(const void *hob_list, u32 *len);

@@ -111,8 +111,8 @@ void *fsp_get_nvs_data(const void *hob_list, u32 *len); * @len: A pointer to the NVS data buffer length. * If the HOB is located, the length will be updated. * - * @return NULL: Failed to find the NVS HOB. - * @return others: FSP NVS data buffer pointer. + * Return: NULL: Failed to find the NVS HOB. + * Return: others: FSP NVS data buffer pointer. */ void *fsp_get_var_nvs_data(const void *hob_list, u32 *len);

@@ -123,15 +123,15 @@ void *fsp_get_var_nvs_data(const void *hob_list, u32 *len); * @len: A pointer to the graphics info HOB length. * If the HOB is located, the length will be updated. * - * @return NULL: Failed to find the graphics info HOB. - * @return others: A pointer to struct hob_graphics_info. + * Return: NULL: Failed to find the graphics info HOB. + * Return: others: A pointer to struct hob_graphics_info. */ void *fsp_get_graphics_info(const void *hob_list, u32 *len);

/** * fsp_init_phase_pci() - Tell the FSP that we have completed PCI init * - * @return 0 if OK, -EPERM if the FSP gave an error. + * Return: 0 if OK, -EPERM if the FSP gave an error. */ int fsp_init_phase_pci(void);

@@ -140,7 +140,7 @@ int fsp_init_phase_pci(void); * * This sets gd->ram_size based on what it finds. * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fsp_scan_for_ram_size(void);

@@ -150,7 +150,7 @@ int fsp_scan_for_ram_size(void); * @fsp_hdr: Pointer to FSP information header * @phase: FSP initialization phase defined in enum fsp_phase * - * @return compatible status code with EFI_STATUS defined in PI spec + * Return: compatible status code with EFI_STATUS defined in PI spec */ u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase);

diff --git a/arch/x86/include/asm/fsp1/fsp_support.h b/arch/x86/include/asm/fsp1/fsp_support.h index a44a5504a4..b5d0f6dfa7 100644 --- a/arch/x86/include/asm/fsp1/fsp_support.h +++ b/arch/x86/include/asm/fsp1/fsp_support.h @@ -33,7 +33,7 @@ void fsp_init_done(void *hob_list); * @status: Always 0 * @hob_list: HOB list pointer * - * @return Never returns + * Return: Never returns */ void fsp_continue(u32 status, void *hob_list);

@@ -53,8 +53,8 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf); * @len: A pointer to the bootloader temporary stack length. * If the HOB is located, the length will be updated. * - * @return NULL: Failed to find the bootloader temporary stack HOB. - * @return others: Bootloader temporary stackbuffer pointer. + * Return: NULL: Failed to find the bootloader temporary stack HOB. + * Return: others: Bootloader temporary stackbuffer pointer. */ void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len);

@@ -64,7 +64,7 @@ void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len); * @config: A pointer to the FSP configuration data structure * @rt_buf: A pointer to the FSP runtime buffer data structure * - * @return None + * Return: None */ void fsp_update_configs(struct fsp_config_data *config, struct fspinit_rtbuf *rt_buf); diff --git a/arch/x86/include/asm/fsp2/fsp_api.h b/arch/x86/include/asm/fsp2/fsp_api.h index af1e8857b9..dccbfa45a1 100644 --- a/arch/x86/include/asm/fsp2/fsp_api.h +++ b/arch/x86/include/asm/fsp2/fsp_api.h @@ -38,7 +38,7 @@ struct __packed fsp_upd_header { * from scatch since we will lose its contents * @use_spi_flash: true to use the fast SPI driver to read FSP, otherwise use * mapped SPI - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fsp_memory_init(bool s3wake, bool use_spi_flash);

@@ -54,7 +54,7 @@ typedef asmlinkage int (*fsp_memory_init_func)(struct fspm_upd *params, * from scatch since we will lose its contents * @use_spi_flash: true to use the fast SPI driver to read FSP, otherwise use * mapped SPI - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fsp_silicon_init(bool s3wake, bool use_spi_flash);

diff --git a/arch/x86/include/asm/fsp2/fsp_internal.h b/arch/x86/include/asm/fsp2/fsp_internal.h index b4a4fbbd84..836660d59d 100644 --- a/arch/x86/include/asm/fsp2/fsp_internal.h +++ b/arch/x86/include/asm/fsp2/fsp_internal.h @@ -57,7 +57,7 @@ int arch_fsps_preinit(void); * * @dev: Hostbridge device containing config * @upd: Config data to fill in - * @return 0 if OK, -ENOENT if OK but no MRC-cache data was found, other -ve on + * Return: 0 if OK, -ENOENT if OK but no MRC-cache data was found, other -ve on * error */ int fspm_update_config(struct udevice *dev, struct fspm_upd *upd); @@ -69,7 +69,7 @@ int fspm_update_config(struct udevice *dev, struct fspm_upd *upd); * continue. * * @dev: Hostbridge device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fspm_done(struct udevice *dev);

@@ -79,7 +79,7 @@ int fspm_done(struct udevice *dev); * @dev: Hostbridge device containing config * @rom_offset: Value to add to convert from ROM offset to memory-mapped address * @upd: Config data to fill in - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fsps_update_config(struct udevice *dev, ulong rom_offset, struct fsps_upd *upd); @@ -90,7 +90,7 @@ int fsps_update_config(struct udevice *dev, ulong rom_offset, * This looks for cached Memory-reference code (MRC) data and stores it into * @upd for use by the FSP-M binary. * - * @return 0 if OK, -ENOENT if no data (whereupon the caller can continue and + * Return: 0 if OK, -ENOENT if no data (whereupon the caller can continue and * expect a slower boot), other -ve value on other error */ int prepare_mrc_cache(struct fspm_upd *upd); diff --git a/arch/x86/include/asm/hob.h b/arch/x86/include/asm/hob.h index 2f5b6e24c2..224bc08c43 100644 --- a/arch/x86/include/asm/hob.h +++ b/arch/x86/include/asm/hob.h @@ -135,7 +135,7 @@ struct hob_guid { * * @hdr: A pointer to a HOB. * - * @return A pointer to the next HOB in the HOB list. + * Return: A pointer to the next HOB in the HOB list. */ static inline const struct hob_header *get_next_hob(const struct hob_header *hdr) @@ -152,8 +152,8 @@ static inline const struct hob_header *get_next_hob(const struct hob_header * * @hdr: A pointer to a HOB. * - * @return true: The HOB specified by hdr is the last HOB in the HOB list. - * @return false: The HOB specified by hdr is not the last HOB in the HOB list. + * Return: true: The HOB specified by hdr is the last HOB in the HOB list. + * Return: false: The HOB specified by hdr is not the last HOB in the HOB list. */ static inline bool end_of_hob(const struct hob_header *hdr) { @@ -169,7 +169,7 @@ static inline bool end_of_hob(const struct hob_header *hdr) * * @hdr: A pointer to a HOB. * - * @return A pointer to the data buffer in a HOB. + * Return: A pointer to the data buffer in a HOB. */ static inline void *get_guid_hob_data(const struct hob_header *hdr) { @@ -185,7 +185,7 @@ static inline void *get_guid_hob_data(const struct hob_header *hdr) * * @hdr: A pointer to a HOB. * - * @return The size of the data buffer. + * Return: The size of the data buffer. */ static inline u16 get_guid_hob_data_size(const struct hob_header *hdr) { @@ -198,7 +198,7 @@ static inline u16 get_guid_hob_data_size(const struct hob_header *hdr) * @type: HOB type to search * @hob_list: A pointer to the HOB list * - * @return A HOB object with matching type; Otherwise NULL. + * Return: A HOB object with matching type; Otherwise NULL. */ const struct hob_header *hob_get_next_hob(uint type, const void *hob_list);

@@ -208,7 +208,7 @@ const struct hob_header *hob_get_next_hob(uint type, const void *hob_list); * @guid: GUID to search * @hob_list: A pointer to the HOB list * - * @return A HOB object with matching GUID; Otherwise NULL. + * Return: A HOB object with matching GUID; Otherwise NULL. */ const struct hob_header *hob_get_next_guid_hob(const efi_guid_t *guid, const void *hob_list); @@ -221,8 +221,8 @@ const struct hob_header *hob_get_next_guid_hob(const efi_guid_t *guid, * If the GUID HOB is located, the length will be updated. * @guid A pointer to HOB GUID. * - * @return NULL: Failed to find the GUID HOB. - * @return others: GUID HOB data buffer pointer. + * Return: NULL: Failed to find the GUID HOB. + * Return: others: GUID HOB data buffer pointer. */ void *hob_get_guid_hob_data(const void *hob_list, u32 *len, const efi_guid_t *guid); diff --git a/arch/x86/include/asm/i8254.h b/arch/x86/include/asm/i8254.h index 4069b9a2b8..0b999a1d31 100644 --- a/arch/x86/include/asm/i8254.h +++ b/arch/x86/include/asm/i8254.h @@ -42,7 +42,7 @@ * after a delay with i8254_disable_beep(). * * @frequency_hz: Frequency of beep in Hz - * @return 0 if OK, -EINVAL if frequency_hz is 0 + * Return: 0 if OK, -EINVAL if frequency_hz is 0 */ int i8254_enable_beep(uint frequency_hz);

diff --git a/arch/x86/include/asm/intel_acpi.h b/arch/x86/include/asm/intel_acpi.h index a5781f1af4..c1f5048ce6 100644 --- a/arch/x86/include/asm/intel_acpi.h +++ b/arch/x86/include/asm/intel_acpi.h @@ -22,7 +22,7 @@ struct udevice; * @core_id: CPU core number, as numbered by the SoC * @c_state_map: Information about each C state * @num_cstates: Number of entries in @c_state_map - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_generate_cpu_header(struct acpi_ctx *ctx, int core_id, const struct acpi_cstate *c_state_map, diff --git a/arch/x86/include/asm/intel_opregion.h b/arch/x86/include/asm/intel_opregion.h index fb3e38617e..182398a7db 100644 --- a/arch/x86/include/asm/intel_opregion.h +++ b/arch/x86/include/asm/intel_opregion.h @@ -239,7 +239,7 @@ struct __packed optionrom_vbt { * * This is called from ACPI code and OS drivers * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int intel_gma_init_igd_opregion(struct udevice *dev, struct igd_opregion *opregion); diff --git a/arch/x86/include/asm/intel_pinctrl.h b/arch/x86/include/asm/intel_pinctrl.h index 44eedc205c..b0ff470568 100644 --- a/arch/x86/include/asm/intel_pinctrl.h +++ b/arch/x86/include/asm/intel_pinctrl.h @@ -167,7 +167,7 @@ int intel_pinctrl_probe(struct udevice *dev); * @dev: Pinctrl device * @comm: Pad community for this device * @num_cfgs: Number of configuration words for each pad - * @return 0 if OK, -EDOM if @comm is NULL, other -ve value on other error + * Return: 0 if OK, -EDOM if @comm is NULL, other -ve value on other error */ int intel_pinctrl_of_to_plat(struct udevice *dev, const struct pad_community *comm, int num_cfgs); @@ -185,7 +185,7 @@ int intel_pinctrl_of_to_plat(struct udevice *dev, * @gpe0b: Value for GPE0B * @gpe0c: Value for GPE0C * @gpe0d: Value for GPE0D - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pinctrl_route_gpe(struct udevice *dev, uint gpe0b, uint gpe0c, uint gpe0d);

@@ -198,7 +198,7 @@ int pinctrl_route_gpe(struct udevice *dev, uint gpe0b, uint gpe0c, uint gpe0d); * @pads: Pad data, consisting of a pad number followed by num_cfgs entries * containing the data for that pad (num_cfgs is set by the pinctrl device) * @pads_count: Number of pads to configure - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pinctrl_config_pads(struct udevice *dev, u32 *pads, int pads_count);

@@ -207,7 +207,7 @@ int pinctrl_config_pads(struct udevice *dev, u32 *pads, int pads_count); * * This enables the interrupt inputs and clears the status register bits * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pinctrl_gpi_clear_int_cfg(void);

@@ -218,7 +218,7 @@ int pinctrl_gpi_clear_int_cfg(void); * * @dev: pinctrl device (any will do) * @node: Node containing the 'pads' property with the data in it - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pinctrl_config_pads_for_node(struct udevice *dev, ofnode node);

@@ -255,7 +255,7 @@ int pinctrl_read_pads(struct udevice *dev, ofnode node, const char *prop, * @dev: pinctrl device (any will do) * @pads: Array of pad data * @size: Size of pad data in bytes - * @return number of pads represented by the data + * Return: number of pads represented by the data */ int pinctrl_count_pads(struct udevice *dev, u32 *pads, int size);

@@ -266,7 +266,7 @@ int pinctrl_count_pads(struct udevice *dev, u32 *pads, int size); * * @dev: Pinctrl device * @offset: GPIO offset within this device - * @return register offset of first register within the GPIO p2sb region + * Return: register offset of first register within the GPIO p2sb region */ u32 intel_pinctrl_get_config_reg_offset(struct udevice *dev, uint offset);

@@ -276,7 +276,7 @@ u32 intel_pinctrl_get_config_reg_offset(struct udevice *dev, uint offset); * This works out the absolute address of the registers for a pin * @dev: Pinctrl device * @offset: GPIO offset within this device - * @return register address of first register within the GPIO p2sb region + * Return: register address of first register within the GPIO p2sb region */ u32 intel_pinctrl_get_config_reg_addr(struct udevice *dev, uint offset);

@@ -285,7 +285,7 @@ u32 intel_pinctrl_get_config_reg_addr(struct udevice *dev, uint offset); * * @dev: Pinctrl device * @offset: GPIO offset within this device - * @return register value within the GPIO p2sb region + * Return: register value within the GPIO p2sb region */ u32 intel_pinctrl_get_config_reg(struct udevice *dev, uint offset);

@@ -297,7 +297,7 @@ u32 intel_pinctrl_get_config_reg(struct udevice *dev, uint offset); * @pad: Pad to check * @devp: Returns pinctrl device containing that pad * @offsetp: Returns offset of pad within that pinctrl device - * @return 0 if OK, -ENOTBLK if pad number is invalid + * Return: 0 if OK, -ENOTBLK if pad number is invalid */ int intel_pinctrl_get_pad(uint pad, struct udevice **devp, uint *offsetp);

@@ -309,7 +309,7 @@ int intel_pinctrl_get_pad(uint pad, struct udevice **devp, uint *offsetp); * * @dev: Pinctrl device to check * @offset: Offset of pin within that device (0 = first) - * @return associated ACPI GPIO pin-table entry, or standard pin number if the + * Return: associated ACPI GPIO pin-table entry, or standard pin number if the * ACPI pad base is not set */ int intel_pinctrl_get_acpi_pin(struct udevice *dev, uint offset); diff --git a/arch/x86/include/asm/lpc_common.h b/arch/x86/include/asm/lpc_common.h index d462c2ec61..aa3ac626b4 100644 --- a/arch/x86/include/asm/lpc_common.h +++ b/arch/x86/include/asm/lpc_common.h @@ -49,7 +49,7 @@ * also puts the RCB in the correct place so that RCB_REG() works. * * @dev: LPC device (a child of the PCH) - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int lpc_common_early_init(struct udevice *dev);

diff --git a/arch/x86/include/asm/me_common.h b/arch/x86/include/asm/me_common.h index 49d88623ed..8570368314 100644 --- a/arch/x86/include/asm/me_common.h +++ b/arch/x86/include/asm/me_common.h @@ -325,7 +325,7 @@ void intel_me_status(struct udevice *me_dev); * intel_early_me_init() - Early Intel Management Engine init * * @me_dev: Management engine PCI device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int intel_early_me_init(struct udevice *me_dev);

@@ -333,7 +333,7 @@ int intel_early_me_init(struct udevice *me_dev); * intel_early_me_uma_size() - Get UMA size from the Intel Management Engine * * @me_dev: Management engine PCI device - * @return UMA size if OK, -EINVAL on error + * Return: UMA size if OK, -EINVAL on error */ int intel_early_me_uma_size(struct udevice *me_dev);

@@ -343,7 +343,7 @@ int intel_early_me_uma_size(struct udevice *me_dev); * @dev: Northbridge device * @me_dev: Management engine PCI device * @status: Status result (ME_INIT_...) - * @return 0 to continue to boot, -EINVAL on unknown result data, -ETIMEDOUT + * Return: 0 to continue to boot, -EINVAL on unknown result data, -ETIMEDOUT * if ME did not respond */ int intel_early_me_init_done(struct udevice *dev, struct udevice *me_dev, diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index 4ab7504931..09652b95a3 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -17,7 +17,7 @@ extern u32 ucode_size; * * Applies any microcode updates in the device tree. * - * @return 0 if OK, -EEXIST if the updates were already applied, -ENOENT if + * Return: 0 if OK, -EEXIST if the updates were already applied, -ENOENT if * not updates were found, -EINVAL if an update was invalid */ int microcode_update_intel(void); @@ -27,7 +27,7 @@ int microcode_update_intel(void); * * This reads the microcode version of the currently running CPU * - * @return microcode version number + * Return: microcode version number */ int microcode_read_rev(void); #endif /* __ASSEMBLY__ */ diff --git a/arch/x86/include/asm/mp.h b/arch/x86/include/asm/mp.h index e48ba051d9..f4c4d6c257 100644 --- a/arch/x86/include/asm/mp.h +++ b/arch/x86/include/asm/mp.h @@ -124,7 +124,7 @@ typedef void (*mp_run_func)(void *arg); * all, or MP_SELECT_BSP for BSP * @func: Function to run * @arg: Argument to pass to the function - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg);

@@ -133,7 +133,7 @@ int mp_run_on_cpus(int cpu_select, mp_run_func func, void *arg); * * This halts all CPUs except the main one, ready for the OS to use them * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mp_park_aps(void);

@@ -145,7 +145,7 @@ int mp_park_aps(void); * -EFBIG. * * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...) - * @return next CPU number to run on (e.g. 0) + * Return: next CPU number to run on (e.g. 0) */ int mp_first_cpu(int cpu_select);

@@ -160,7 +160,7 @@ int mp_first_cpu(int cpu_select); * * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...) * @prev_cpu: Previous value returned by mp_first_cpu()/mp_next_cpu() - * @return next CPU number to run on (e.g. 0) + * Return: next CPU number to run on (e.g. 0) */ int mp_next_cpu(int cpu_select, int prev_cpu); #else diff --git a/arch/x86/include/asm/mrc_common.h b/arch/x86/include/asm/mrc_common.h index d4e56bf37c..3d7f00c9f9 100644 --- a/arch/x86/include/asm/mrc_common.h +++ b/arch/x86/include/asm/mrc_common.h @@ -17,7 +17,7 @@ * @pei_data: Platform-specific data required by the MRC * @use_asm_linkage: true if the call to MRC requires asmlinkage, false if it * uses normal U-Boot calling - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mrc_common_init(struct udevice *dev, void *pei_data, bool use_asm_linkage);

diff --git a/arch/x86/include/asm/mrccache.h b/arch/x86/include/asm/mrccache.h index 8b104a2f0b..8ed6e0e9d6 100644 --- a/arch/x86/include/asm/mrccache.h +++ b/arch/x86/include/asm/mrccache.h @@ -46,7 +46,7 @@ struct udevice; * for setting up SDRAM * * @entry: Position and size of MRC cache in SPI flash - * @return pointer to latest record, or NULL if none + * Return: pointer to latest record, or NULL if none */ struct mrc_data_container *mrccache_find_current(struct mrc_region *entry);

@@ -60,7 +60,7 @@ struct mrc_data_container *mrccache_find_current(struct mrc_region *entry); * This routine should be called by reserve_arch() before U-Boot is relocated * when MRC cache is enabled. * - * @return 0 always + * Return: 0 always */ int mrccache_reserve(void);

@@ -75,7 +75,7 @@ int mrccache_reserve(void); * @type: Type of MRC data to use * @devp: Returns pointer to the SPI flash device, if found * @entry: Position and size of MRC cache in SPI flash - * @return 0 if success, -ENOENT if SPI flash node does not exist in the + * Return: 0 if success, -ENOENT if SPI flash node does not exist in the * device tree, -EPERM if MRC region subnode does not exist in the device * tree, -EINVAL if MRC region properties format is incorrect, other error * if SPI flash probe failed. @@ -89,7 +89,7 @@ int mrccache_get_region(enum mrc_type_t type, struct udevice **devp, * This saves MRC data stored previously by gd->arch.mrc_output to a proper * place within the MRC region on the SPI flash. * - * @return 0 if saved to SPI flash successfully, other error if failed + * Return: 0 if saved to SPI flash successfully, other error if failed */ int mrccache_save(void);

@@ -100,7 +100,7 @@ int mrccache_save(void); * data in SPL to avoid needing to pass it up to U-Boot proper to save. This * function handles that. * - * @return 0 if saved to SPI flash successfully, other error if failed + * Return: 0 if saved to SPI flash successfully, other error if failed */ int mrccache_spl_save(void);

diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h index d1aa86bf1d..ca2edc7878 100644 --- a/arch/x86/include/asm/mtrr.h +++ b/arch/x86/include/asm/mtrr.h @@ -145,7 +145,7 @@ int mtrr_commit(bool do_caches); * @type: Requested type (MTRR_TYPE_) * @start: Start address * @size: Size, must be power of 2 - * @return 0 on success, -EINVAL if size is not power of 2, + * Return: 0 on success, -EINVAL if size is not power of 2, * -ENOSPC if there are no more MTRRs */ int mtrr_set_next_var(uint type, uint64_t base, uint64_t size); @@ -166,7 +166,7 @@ void mtrr_read_all(struct mtrr_info *info); * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...) * @reg: MTRR register to write (0-7) * @valid: Valid flag to write - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int mtrr_set_valid(int cpu_select, int reg, bool valid);

@@ -177,7 +177,7 @@ int mtrr_set_valid(int cpu_select, int reg, bool valid); * @reg: MTRR register to write (0-7) * @base: Base address and MTRR_BASE_TYPE_MASK * @mask: Mask and MTRR_PHYS_MASK_VALID - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int mtrr_set(int cpu_select, int reg, u64 base, u64 mask);

@@ -186,7 +186,7 @@ int mtrr_set(int cpu_select, int reg, u64 base, u64 mask); * * Some CPUs have more than 8 MTRRs. This function returns the actual number * - * @return number of variable MTRRs + * Return: number of variable MTRRs */ int mtrr_get_var_count(void);

diff --git a/arch/x86/include/asm/pch_common.h b/arch/x86/include/asm/pch_common.h index c4614d3f42..5b8d19ff61 100644 --- a/arch/x86/include/asm/pch_common.h +++ b/arch/x86/include/asm/pch_common.h @@ -39,7 +39,7 @@ * * @dev: SATA device * @idx: Register index to read - * @return value read from register + * Return: value read from register */ u32 pch_common_sir_read(struct udevice *dev, int idx);

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 2a72073572..1c30b32d46 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -26,7 +26,7 @@ * @offset: Register offset to read * @valuep: Place to put the returned value * @size: Access size - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep, enum pci_size_t size); @@ -40,7 +40,7 @@ int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep, * @offset: Register offset to write * @value: Value to write * @size: Access size - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value, enum pci_size_t size); @@ -55,7 +55,7 @@ int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value, * @offset: Register offset to update * @clr: Bits to clear * @set: Bits to set - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set, enum pci_size_t size); diff --git a/arch/x86/include/asm/sfi.h b/arch/x86/include/asm/sfi.h index 09d4700812..10bd1c56a3 100644 --- a/arch/x86/include/asm/sfi.h +++ b/arch/x86/include/asm/sfi.h @@ -148,7 +148,7 @@ typedef int (*sfi_table_handler) (struct sfi_table_header *table); * write_sfi_table() - Write Simple Firmware Interface tables * * @base: Address to write table to - * @return address to use for the next table + * Return: address to use for the next table */ ulong write_sfi_table(ulong base);

diff --git a/arch/x86/include/asm/tables.h b/arch/x86/include/asm/tables.h index bf66e79018..aa938837b6 100644 --- a/arch/x86/include/asm/tables.h +++ b/arch/x86/include/asm/tables.h @@ -50,7 +50,7 @@ void table_fill_string(char *dest, const char *src, size_t n, char pad); * Multi-Processor table and ACPI table. Whether a specific type of * configuration table is written is controlled by a Kconfig option. * - * @return 0 if OK, -ENOSPC if table too large + * Return: 0 if OK, -ENOSPC if table too large */ int write_tables(void);

diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index d732661f6d..a1655e1cea 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -30,7 +30,7 @@ int x86_cpu_init_f(void); * identify so that CPU functions can be used correctly, but does not change * anything. * - * @return 0 (indicating success, to mimic cpu_init_f()) + * Return: 0 (indicating success, to mimic cpu_init_f()) */ int x86_cpu_reinit_f(void);

@@ -39,7 +39,7 @@ int x86_cpu_reinit_f(void); * * This just sets up the CPU features and figured out the identity * - * @return 0 (indicating success, to mimic cpu_init_f()) + * Return: 0 (indicating success, to mimic cpu_init_f()) */ int x86_cpu_init_tpl(void);

diff --git a/arch/x86/include/asm/zimage.h b/arch/x86/include/asm/zimage.h index fa6e7f76e0..000b38ea89 100644 --- a/arch/x86/include/asm/zimage.h +++ b/arch/x86/include/asm/zimage.h @@ -39,7 +39,7 @@ * @kernel_size: Size of kernel including setup block (or 0 if the kernel is * new enough to have a 'syssize' value) * @load_addressp: Returns the address where the kernel has been loaded - * @return address of setup block, or NULL if something went wrong + * Return: address of setup block, or NULL if something went wrong */ struct boot_params *load_zimage(char *image, unsigned long kernel_size, ulong *load_addressp); @@ -57,7 +57,7 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size, * BZIMAGE_LOAD_ADDR or ZIMAGE_LOAD_ADDR * @cmdline_force: Address of 'override' command line, or 0 to use the one in * the * setup block - * @return 0 (always) + * Return: 0 (always) */ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, ulong initrd_addr, ulong initrd_size, ulong cmdline_force); diff --git a/arch/x86/lib/hob.c b/arch/x86/lib/hob.c index f2c47240ee..b35248e5fd 100644 --- a/arch/x86/lib/hob.c +++ b/arch/x86/lib/hob.c @@ -13,7 +13,7 @@ * @type: HOB type to search * @hob_list: A pointer to the HOB list * - * @return A HOB object with matching type; Otherwise NULL. + * Return: A HOB object with matching type; Otherwise NULL. */ const struct hob_header *hob_get_next_hob(uint type, const void *hob_list) { @@ -38,7 +38,7 @@ const struct hob_header *hob_get_next_hob(uint type, const void *hob_list) * @guid: GUID to search * @hob_list: A pointer to the HOB list * - * @return A HOB object with matching GUID; Otherwise NULL. + * Return: A HOB object with matching GUID; Otherwise NULL. */ const struct hob_header *hob_get_next_guid_hob(const efi_guid_t *guid, const void *hob_list) @@ -65,8 +65,8 @@ const struct hob_header *hob_get_next_guid_hob(const efi_guid_t *guid, * If the GUID HOB is located, the length will be updated. * @guid A pointer to HOB GUID. * - * @return NULL: Failed to find the GUID HOB. - * @return others: GUID HOB data buffer pointer. + * Return: NULL: Failed to find the GUID HOB. + * Return: others: GUID HOB data buffer pointer. */ void *hob_get_guid_hob_data(const void *hob_list, u32 *len, const efi_guid_t *guid) diff --git a/arch/x86/lib/mrccache.c b/arch/x86/lib/mrccache.c index b526915680..38632e513f 100644 --- a/arch/x86/lib/mrccache.c +++ b/arch/x86/lib/mrccache.c @@ -93,7 +93,7 @@ struct mrc_data_container *mrccache_find_current(struct mrc_region *entry) * @data_size: Required data size of the new entry. Note that we assume that * all cache entries are the same size * - * @return next cache entry if found, NULL if we got to the end + * Return: next cache entry if found, NULL if we got to the end */ static struct mrc_data_container *find_next_mrc_cache(struct mrc_region *entry, struct mrc_data_container *prev, int data_size) @@ -130,7 +130,7 @@ static struct mrc_data_container *find_next_mrc_cache(struct mrc_region *entry, * @sf: SPI flash to write to * @entry: Position and size of MRC cache in SPI flash * @cur: Record to write - * @return 0 if updated, -EEXIST if the record is the same as the latest + * Return: 0 if updated, -EEXIST if the record is the same as the latest * record, -EINVAL if the record is not valid, other error if SPI write failed */ static int mrccache_update(struct udevice *sf, struct mrc_region *entry, diff --git a/board/Marvell/octeontx/board-fdt.c b/board/Marvell/octeontx/board-fdt.c index e989c374f2..6642b167e1 100644 --- a/board/Marvell/octeontx/board-fdt.c +++ b/board/Marvell/octeontx/board-fdt.c @@ -299,7 +299,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) /** * Return the FDT base address that was passed by ATF * - * @return FDT base address received from ATF in x1 register + * Return: FDT base address received from ATF in x1 register */ void *board_fdt_blob_setup(int *err) { diff --git a/board/Marvell/octeontx2/board-fdt.c b/board/Marvell/octeontx2/board-fdt.c index e2cfe017e8..04be9fb0a9 100644 --- a/board/Marvell/octeontx2/board-fdt.c +++ b/board/Marvell/octeontx2/board-fdt.c @@ -213,7 +213,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) /** * Return the FDT base address that was passed by ATF * - * @return FDT base address received from ATF in x1 register + * Return: FDT base address received from ATF in x1 register */ void *board_fdt_blob_setup(int *err) { diff --git a/board/emulation/qemu-ppce500/qemu-ppce500.c b/board/emulation/qemu-ppce500/qemu-ppce500.c index 7d8ba34b25..348fcf3bb0 100644 --- a/board/emulation/qemu-ppce500/qemu-ppce500.c +++ b/board/emulation/qemu-ppce500/qemu-ppce500.c @@ -331,7 +331,7 @@ u32 cpu_mask(void) /** * Return the virtual address of FDT that was passed by QEMU * - * @return virtual address of FDT received from QEMU in r3 register + * Return: virtual address of FDT received from QEMU in r3 register */ void *board_fdt_blob_setup(int *err) { diff --git a/board/gdsys/a38x/hre.c b/board/gdsys/a38x/hre.c index de5411a6b9..2f16a4d3e1 100644 --- a/board/gdsys/a38x/hre.c +++ b/board/gdsys/a38x/hre.c @@ -98,7 +98,7 @@ static const uint8_t vendor[] = "Guntermann & Drunck"; * @param tpm TPM device * @param index NV index of the area to get size for * @param size pointer to the size - * @return 0 on success, != 0 on error + * Return: 0 on success, != 0 on error */ static int get_tpm_nv_size(struct udevice *tpm, uint32_t index, uint32_t *size) { @@ -135,7 +135,7 @@ static int get_tpm_nv_size(struct udevice *tpm, uint32_t index, uint32_t *size) * @param auth usage auth of the key to search for * @param pubkey_digest (SHA1) hash of the pub key structure of the key * @param[out] handle the handle of the key iff found - * @return 0 if key was found in TPM; != 0 if not. + * Return: 0 if key was found in TPM; != 0 if not. */ static int find_key(struct udevice *tpm, const uint8_t auth[20], const uint8_t pubkey_digest[20], uint32_t *handle) @@ -180,7 +180,7 @@ static int find_key(struct udevice *tpm, const uint8_t auth[20], /** * @brief read CCDM common data from TPM NV * @param tpm TPM device - * @return 0 if CCDM common data was found and read, !=0 if something failed. + * Return: 0 if CCDM common data was found and read, !=0 if something failed. */ static int read_common_data(struct udevice *tpm) { @@ -216,7 +216,7 @@ static int read_common_data(struct udevice *tpm) /** * @brief get pointer to hash register by specification * @param spec specification of a hash register - * @return pointer to hash register or NULL if @a spec does not qualify a + * Return: pointer to hash register or NULL if @a spec does not qualify a * valid hash register; NULL else. */ static struct h_reg *get_hreg(uint8_t spec) @@ -245,7 +245,7 @@ static struct h_reg *get_hreg(uint8_t spec) * @param tpm TPM device * @param spec specification of a hash register * @param mode access mode (read or write or read/write) - * @return pointer to hash register if found and valid; NULL else. + * Return: pointer to hash register if found and valid; NULL else. * * This func uses @a get_reg() to determine the hash register for a given spec. * If a register is found it is validated according to the desired access mode. @@ -372,7 +372,7 @@ static int hre_op_loadkey(struct udevice *tpm, struct h_reg *src_reg, * @param tpm TPM device * @param[in,out] ip pointer to the opcode (instruction pointer) * @param[in,out] code_size (remaining) size of the code - * @return new instruction pointer on success, NULL on error. + * Return: new instruction pointer on success, NULL on error. */ static const uint8_t *hre_execute_op(struct udevice *tpm, const uint8_t **ip, size_t *code_size) @@ -497,7 +497,7 @@ end: * @param tpm TPM device * @param code pointer to the (HRE) code. * @param code_size size of the code (in bytes). - * @return 0 on success, != 0 on failure. + * Return: 0 on success, != 0 on failure. */ int hre_run_program(struct udevice *tpm, const uint8_t *code, size_t code_size) { diff --git a/board/google/chromebook_coral/coral.c b/board/google/chromebook_coral/coral.c index 53c5171d02..182cf7517a 100644 --- a/board/google/chromebook_coral/coral.c +++ b/board/google/chromebook_coral/coral.c @@ -98,7 +98,7 @@ static int get_memconfig(struct udevice *dev) * EC - reading from the EC (backup) * * @dev: sysinfo device to use - * @return SKU ID, or -ve error if not found + * Return: SKU ID, or -ve error if not found */ static int get_skuconfig(struct udevice *dev) { diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 23e8005991..a854d615c1 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -628,7 +628,7 @@ int get_voltrail_opp(int rail_offset) /** * @brief board_init * - * @return 0 + * Return: 0 */ int board_init(void) { diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 4777622156..929668ebaa 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -138,7 +138,7 @@ int usb_gadget_handle_interrupts(int index) /** * @brief board_init * - * @return 0 + * Return: 0 */ int board_init(void) { @@ -172,7 +172,7 @@ int board_eth_init(struct bd_info *bis) * such as power configurations, ethernet initialization as phase2 of * boot sequence * - * @return 0 + * Return: 0 */ int misc_init_r(void) { @@ -212,7 +212,7 @@ int board_mmc_init(struct bd_info *bis) * @brief board_usb_init - Configure EVM board specific configurations * for the LDO's and clocks for the USB blocks. * - * @return 0 + * Return: 0 */ int board_usb_init(int index, enum usb_init_type init) { diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index d8062997e5..2209318601 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -39,7 +39,7 @@ struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000; /** * @brief board_init * - * @return 0 + * Return: 0 */ int board_init(void) { @@ -215,7 +215,7 @@ void emif_get_dmm_regs(const struct dmm_lisa_map_regs * such as power configurations, ethernet initialization as phase2 of * boot sequence * - * @return 0 + * Return: 0 */ int misc_init_r(void) { diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 69726eb9ce..2c9ae794fd 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -25,7 +25,7 @@ const struct omap_sysinfo sysinfo = { /** * @brief board_init * - * @return 0 + * Return: 0 */ int board_init(void) { @@ -46,7 +46,7 @@ int board_eth_init(struct bd_info *bis) * such as power configurations, ethernet initialization as phase2 of * boot sequence * - * @return 0 + * Return: 0 */ int misc_init_r(void) { diff --git a/boot/android_ab.c b/boot/android_ab.c index 4943f26d53..2d7b392666 100644 --- a/boot/android_ab.c +++ b/boot/android_ab.c @@ -22,7 +22,7 @@ * * @param[in] abc bootloader control block * - * @return crc32 sum + * Return: crc32 sum */ static uint32_t ab_control_compute_crc(struct bootloader_control *abc) { @@ -38,7 +38,7 @@ static uint32_t ab_control_compute_crc(struct bootloader_control *abc) * * @param[in] abc bootloader control block * - * @return 0 on success and a negative on error + * Return: 0 on success and a negative on error */ static int ab_control_default(struct bootloader_control *abc) { @@ -81,7 +81,7 @@ static int ab_control_default(struct bootloader_control *abc) * @param[in] part_info Partition in 'dev_desc' where to read from, normally * the "misc" partition should be used * @param[out] pointer to pointer to bootloader_control data - * @return 0 on success and a negative on error + * Return: 0 on success and a negative on error */ static int ab_control_create_from_disk(struct blk_desc *dev_desc, const struct disk_partition *part_info, @@ -131,7 +131,7 @@ static int ab_control_create_from_disk(struct blk_desc *dev_desc, * @param[in] part_info Partition on the 'dev_desc' where to write * @param[in] abc Pointer to the boot control struct and the extra bytes after * it up to the nearest block boundary - * @return 0 on success and a negative on error + * Return: 0 on success and a negative on error */ static int ab_control_store(struct blk_desc *dev_desc, const struct disk_partition *part_info, @@ -160,7 +160,7 @@ static int ab_control_store(struct blk_desc *dev_desc, * * @param[in] a The first bootable slot metadata * @param[in] b The second bootable slot metadata - * @return Negative if the slot "a" is better, positive of the slot "b" is + * Return: Negative if the slot "a" is better, positive of the slot "b" is * better or 0 if they are equally good. */ static int ab_compare_slots(const struct slot_metadata *a, diff --git a/boot/bootm.c b/boot/bootm.c index 4482f84b40..00c00aef84 100644 --- a/boot/bootm.c +++ b/boot/bootm.c @@ -343,7 +343,7 @@ static int bootm_find_other(struct cmd_tbl *cmdtp, int flag, int argc, * @comp_type: Compression type being used (IH_COMP_...) * @uncomp_size: Number of bytes uncompressed * @ret: errno error code received from compression library - * @return Appropriate BOOTM_ERR_ error code + * Return: Appropriate BOOTM_ERR_ error code */ static int handle_decomp_error(int comp_type, size_t uncomp_size, int ret) { @@ -434,7 +434,7 @@ static int bootm_load_os(bootm_headers_t *images, int boot_progress) /** * bootm_disable_interrupts() - Disable interrupts in preparation for load/boot * - * @return interrupt flag (0 if interrupts were disabled, non-zero if they were + * Return: interrupt flag (0 if interrupts were disabled, non-zero if they were * enabled) */ ulong bootm_disable_interrupts(void) @@ -481,7 +481,7 @@ ulong bootm_disable_interrupts(void) * * @buf: Buffer containing the string to process * @maxlen: Maximum length of buffer - * @return 0 if OK, -ENOSPC if @maxlen is too small + * Return: 0 if OK, -ENOSPC if @maxlen is too small */ static int fixup_silent_linux(char *buf, int maxlen) { @@ -551,7 +551,7 @@ static int fixup_silent_linux(char *buf, int maxlen) * * @buf: Buffer containing the string to process * @maxlen: Maximum length of buffer - * @return 0 if OK, -ENOSPC if @maxlen is too small + * Return: 0 if OK, -ENOSPC if @maxlen is too small */ static int process_subst(char *buf, int maxlen) { @@ -655,7 +655,7 @@ int bootm_process_cmdline_env(int flags) * @param states Mask containing states to run (BOOTM_STATE_...) * @param images Image header information * @param boot_progress 1 to show boot progress, 0 to not do this - * @return 0 if ok, something else on error. Some errors will cause this + * Return: 0 if ok, something else on error. Some errors will cause this * function to perform a reboot! If states contains BOOTM_STATE_OS_GO * then the intent is to boot an OS, so this function will not return * unless the image type is standalone. diff --git a/boot/fdt_region.c b/boot/fdt_region.c index bac5559329..295ea08ac9 100644 --- a/boot/fdt_region.c +++ b/boot/fdt_region.c @@ -231,7 +231,7 @@ static int region_list_contains_offset(struct fdt_region_state *info, * function) * @max_regions: Maximum number of regions in @region list * @info: Place to put the region state - * @return number of regions after processing, or -FDT_ERR_NOSPACE if we did + * Return: number of regions after processing, or -FDT_ERR_NOSPACE if we did * not have enough room in the regions table for the regions we wanted to add. */ int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, diff --git a/boot/image-android-dt.c b/boot/image-android-dt.c index a2d52df4a2..fb014190d4 100644 --- a/boot/image-android-dt.c +++ b/boot/image-android-dt.c @@ -14,7 +14,7 @@ * Check if image header is correct. * * @param hdr_addr Start address of DT image - * @return true if header is correct or false if header is incorrect + * Return: true if header is correct or false if header is incorrect */ bool android_dt_check_header(ulong hdr_addr) { @@ -36,7 +36,7 @@ bool android_dt_check_header(ulong hdr_addr) * @param[out] addr If not NULL, will contain address to specified FDT * @param[out] size If not NULL, will contain size of specified FDT * - * @return true on success or false on error + * Return: true on success or false on error */ bool android_dt_get_fdt_by_index(ulong hdr_addr, u32 index, ulong *addr, u32 *size) diff --git a/boot/image-board.c b/boot/image-board.c index 251885c903..0d2e0fc969 100644 --- a/boot/image-board.c +++ b/boot/image-board.c @@ -321,7 +321,7 @@ int genimg_has_config(bootm_headers_t *images) * @arch: expected ramdisk architecture * @rd_datap: pointer to a ulong variable, will hold ramdisk pointer * @rd_lenp: pointer to a ulong variable, will hold ramdisk length - * @return 0 if OK, -ENOPKG if no ramdisk (but an error should not be reported), + * Return: 0 if OK, -ENOPKG if no ramdisk (but an error should not be reported), * other -ve value on other error */ static int select_ramdisk(bootm_headers_t *images, const char *select, u8 arch, diff --git a/boot/image-fdt.c b/boot/image-fdt.c index 7aad6d57b8..692a9ad3e4 100644 --- a/boot/image-fdt.c +++ b/boot/image-fdt.c @@ -258,7 +258,7 @@ error: * @select: name of FDT to select, or NULL for any * @arch: expected FDT architecture * @fdt_addrp: pointer to a ulong variable, will hold FDT pointer - * @return 0 if OK, -ENOPKG if no FDT (but an error should not be reported), + * Return: 0 if OK, -ENOPKG if no FDT (but an error should not be reported), * other -ve value on other error */

diff --git a/boot/image-fit-sig.c b/boot/image-fit-sig.c index 63e5423c92..9b1d38b20a 100644 --- a/boot/image-fit-sig.c +++ b/boot/image-fit-sig.c @@ -236,7 +236,7 @@ int fit_image_verify_required_sigs(const void *fit, int image_noffset, * /configurations/conf-1/kernel) * @err_msgp: In the event of an error, this will be pointed to a * help error string to display to the user. - * @return 0 if all verified ok, <0 on error + * Return: 0 if all verified ok, <0 on error */ static int fit_config_check_sig(const void *fit, int noffset, int required_keynode, int conf_noffset, diff --git a/boot/image-fit.c b/boot/image-fit.c index b629339f4e..f6594e065c 100644 --- a/boot/image-fit.c +++ b/boot/image-fit.c @@ -1595,7 +1595,7 @@ int fit_image_check_comp(const void *fit, int noffset, uint8_t comp) * * @fit: FIT to check * @parent: Parent node to check - * @return 0 if OK, -EADDRNOTAVAIL is a node has a name containing '@' + * Return: 0 if OK, -EADDRNOTAVAIL is a node has a name containing '@' */ static int fdt_check_no_at(const void *fit, int parent) { @@ -1961,7 +1961,7 @@ int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, /** * fit_get_image_type_property() - get property name for IH_TYPE_... * - * @return the properly name where we expect to find the image in the + * Return: the properly name where we expect to find the image in the * config node */ static const char *fit_get_image_type_property(int type) diff --git a/boot/image.c b/boot/image.c index c7ab034e08..07fa2d3160 100644 --- a/boot/image.c +++ b/boot/image.c @@ -550,7 +550,7 @@ static const char *unknown_msg(enum ih_category category) * This will scan the translation table trying to find the entry that matches * the given id. * - * @return long entry name if translation succeeds; error string on failure + * Return: long entry name if translation succeeds; error string on failure */ const char *genimg_get_cat_name(enum ih_category category, uint id) { @@ -570,7 +570,7 @@ const char *genimg_get_cat_name(enum ih_category category, uint id) * This will scan the translation table trying to find the entry that matches * the given id. * - * @return short entry name if translation succeeds; error string on failure + * Return: short entry name if translation succeeds; error string on failure */ const char *genimg_get_cat_short_name(enum ih_category category, uint id) { @@ -600,7 +600,7 @@ const char *genimg_get_cat_desc(enum ih_category category) * This will scan the translation table trying to find the entry that matches * the given id. * - * @return true if category has entry id; false if not + * Return: true if category has entry id; false if not */ bool genimg_cat_has_id(enum ih_category category, uint id) { diff --git a/boot/pxe_utils.c b/boot/pxe_utils.c index fcfee5e8b9..bb231b11a2 100644 --- a/boot/pxe_utils.c +++ b/boot/pxe_utils.c @@ -56,7 +56,7 @@ int pxe_get_file_size(ulong *sizep) * * @outbuf: Buffer to write string to * @outbuf_len: length of buffer - * @return 1 if OK, -ENOSPC if buffer is too small, -ENOENT is there is no + * Return: 1 if OK, -ENOSPC if buffer is too small, -ENOENT is there is no * current ethernet device */ int format_mac_pxe(char *outbuf, size_t outbuf_len) diff --git a/cmd/acpi.c b/cmd/acpi.c index e5b9a1752b..9c3462b411 100644 --- a/cmd/acpi.c +++ b/cmd/acpi.c @@ -39,7 +39,7 @@ static void dump_hdr(struct acpi_table_header *hdr) * find_table() - Look up an ACPI table * * @sig: Signature of table (4 characters, upper case) - * @return pointer to table header, or NULL if not found + * Return: pointer to table header, or NULL if not found */ struct acpi_table_header *find_table(const char *sig) { diff --git a/cmd/cramfs.c b/cmd/cramfs.c index d79292bad5..2aad50c672 100644 --- a/cmd/cramfs.c +++ b/cmd/cramfs.c @@ -92,7 +92,7 @@ extern int cramfs_info (struct part_info *info); * @param flag command flag * @param argc number of arguments supplied to the command * @param argv arguments list - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int do_cramfs_load(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) @@ -161,7 +161,7 @@ int do_cramfs_load(struct cmd_tbl *cmdtp, int flag, int argc, * @param flag command flag * @param argc number of arguments supplied to the command * @param argv arguments list - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int do_cramfs_ls(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/cmd/cros_ec.c b/cmd/cros_ec.c index a40f5898b5..ad49905d67 100644 --- a/cmd/cros_ec.c +++ b/cmd/cros_ec.c @@ -23,7 +23,7 @@ static const char * const ec_current_image_name[] = {"unknown", "RO", "RW"}; * * @param argc Number of params remaining * @param argv List of remaining parameters - * @return flash region (EC_FLASH_REGION_...) or -1 on error + * Return: flash region (EC_FLASH_REGION_...) or -1 on error */ static int cros_ec_decode_region(int argc, char *const argv[]) { @@ -48,7 +48,7 @@ static int cros_ec_decode_region(int argc, char *const argv[]) * @param is_write 1 do to a write, 0 to do a read * @param argc Number of arguments * @param argv Arguments (2 is region, 3 is address) - * @return 0 for ok, 1 for a usage error or -ve for ec command error + * Return: 0 for ok, 1 for a usage error or -ve for ec command error * (negative EC_RES_...) */ static int do_read_write(struct udevice *dev, int is_write, int argc, diff --git a/cmd/gpt.c b/cmd/gpt.c index f818fbb71f..1c0525fbf6 100644 --- a/cmd/gpt.c +++ b/cmd/gpt.c @@ -38,7 +38,7 @@ static LIST_HEAD(disk_partitions); * @param str - pointer to string * @param env - pointer to pointer to extracted env * - * @return - zero on successful expand and env is set + * Return: - zero on successful expand and env is set */ static int extract_env(const char *str, char **env) { @@ -97,7 +97,7 @@ static int extract_env(const char *str, char **env) * @param str - pointer to string with key=values pairs * @param key - pointer to the key to search for * - * @return - pointer to allocated string with the value + * Return: - pointer to allocated string with the value */ static char *extract_val(const char *str, const char *key) { @@ -134,7 +134,7 @@ static char *extract_val(const char *str, const char *key) * @param str - pointer to string with key * @param key - pointer to the key to search for * - * @return - true on found key + * Return: - true on found key */ static bool found_key(const char *str, const char *key) { @@ -403,7 +403,7 @@ static int do_get_gpt_info(struct blk_desc *dev_desc, char * const namestr) * @param partitions - pointer to pointer to allocated partitions array * @param parts_count - number of partitions * - * @return - zero on success, otherwise error + * Return: - zero on success, otherwise error * */ static int set_gpt_info(struct blk_desc *dev_desc, @@ -969,7 +969,7 @@ static int do_rename_gpt_parts(struct blk_desc *dev_desc, char *subcomm, * @param argc * @param argv * - * @return zero on success; otherwise error + * Return: zero on success; otherwise error */ static int do_gpt(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/cmd/jffs2.c b/cmd/jffs2.c index 6f15b57b6a..914a7beeed 100644 --- a/cmd/jffs2.c +++ b/cmd/jffs2.c @@ -149,7 +149,7 @@ extern int cramfs_info (struct part_info *info); * Check device number to be within valid range for given device type. * * @param dev device to validate - * @return 0 if device is valid, 1 otherwise + * Return: 0 if device is valid, 1 otherwise */ static int mtd_device_validate(u8 type, u8 num, u32 *size) { @@ -201,7 +201,7 @@ static int mtd_device_validate(u8 type, u8 num, u32 *size) * @param ret_id output pointer to next char after parse completes (output) * @param dev_type parsed device type (output) * @param dev_num parsed device number (output) - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num) { @@ -241,7 +241,7 @@ static int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *d /** * Calculate sector size. * - * @return sector size + * Return: sector size */ static inline u32 get_part_sector_size_nand(struct mtdids *id) { @@ -329,7 +329,7 @@ static inline u32 get_part_sector_size(struct mtdids *id, struct part_info *part * 'Static' version of command line mtdparts_init() routine. Single partition on * a single device configuration. * - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int mtdparts_init(void) { @@ -412,7 +412,7 @@ int mtdparts_init(void) * * @param dev device that is to be searched for a partition * @param part_num requested partition number - * @return pointer to the part_info, NULL otherwise + * Return: pointer to the part_info, NULL otherwise */ static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num) { @@ -459,7 +459,7 @@ static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int pa * @param flag command flag * @param argc number of arguments supplied to the command * @param argv arguments list - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int do_jffs2_fsload(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) @@ -522,7 +522,7 @@ int do_jffs2_fsload(struct cmd_tbl *cmdtp, int flag, int argc, * @param flag command flag * @param argc number of arguments supplied to the command * @param argv arguments list - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int do_jffs2_ls(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { @@ -560,7 +560,7 @@ int do_jffs2_ls(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) * @param flag command flag * @param argc number of arguments supplied to the command * @param argv arguments list - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int do_jffs2_fsinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) diff --git a/cmd/mtdparts.c b/cmd/mtdparts.c index 3048700778..bab75a262f 100644 --- a/cmd/mtdparts.c +++ b/cmd/mtdparts.c @@ -170,7 +170,7 @@ static int device_del(struct mtd_device *dev); * * @param ptr where parse begins * @param retptr output pointer to next char after parse completes (output) - * @return resulting unsigned int + * Return: resulting unsigned int */ static u64 memsize_parse (const char *const ptr, const char **retptr) { @@ -302,7 +302,7 @@ static void current_save(void) * @param type mtd type * @param num mtd number * @param mtd a pointer to an mtd_info instance (output) - * @return 0 if device is valid, 1 otherwise + * Return: 0 if device is valid, 1 otherwise */ static int get_mtd_info(u8 type, u8 num, struct mtd_info **mtd) { @@ -326,7 +326,7 @@ static int get_mtd_info(u8 type, u8 num, struct mtd_info **mtd) * * @param id of the parent device * @param part partition to validate - * @return 0 if partition is valid, 1 otherwise + * Return: 0 if partition is valid, 1 otherwise */ static int part_validate_eraseblock(struct mtdids *id, struct part_info *part) { @@ -413,7 +413,7 @@ static int part_validate_eraseblock(struct mtdids *id, struct part_info *part) * * @param id of the parent device * @param part partition to validate - * @return 0 if partition is valid, 1 otherwise + * Return: 0 if partition is valid, 1 otherwise */ static int part_validate(struct mtdids *id, struct part_info *part) { @@ -449,7 +449,7 @@ static int part_validate(struct mtdids *id, struct part_info *part) * * @param dev device to delete partition from * @param part partition to delete - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int part_del(struct mtd_device *dev, struct part_info *part) { @@ -577,7 +577,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part) * * @param dev device to which partition is added * @param part partition to be added - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int part_add(struct mtd_device *dev, struct part_info *part) { @@ -599,7 +599,7 @@ static int part_add(struct mtd_device *dev, struct part_info *part) * @param partdef pointer to the partition definition string i.e. <part-def> * @param ret output pointer to next char after parse completes (output) * @param retpart pointer to the allocated partition (output) - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int part_parse(const char *const partdef, const char **ret, struct part_info **retpart) { @@ -717,7 +717,7 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i * @param type mtd type * @param num mtd number * @param size a pointer to the size of the mtd device (output) - * @return 0 if device is valid, 1 otherwise + * Return: 0 if device is valid, 1 otherwise */ static int mtd_device_validate(u8 type, u8 num, u64 *size) { @@ -735,7 +735,7 @@ static int mtd_device_validate(u8 type, u8 num, u64 *size) * Delete all mtd devices from a supplied devices list, free memory allocated for * each device and delete all device partitions. * - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int device_delall(struct list_head *head) { @@ -759,7 +759,7 @@ static int device_delall(struct list_head *head) * from device list and device memory is freed. * * @param dev device to be deleted - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int device_del(struct mtd_device *dev) { @@ -791,7 +791,7 @@ static int device_del(struct mtd_device *dev) * * @param type device type * @param num device number - * @return NULL if requested device does not exist + * Return: NULL if requested device does not exist */ struct mtd_device *device_find(u8 type, u8 num) { @@ -838,7 +838,7 @@ static void device_add(struct mtd_device *dev) * @param mtd_dev pointer to the device definition string i.e. <mtd-dev> * @param ret output pointer to next char after parse completes (output) * @param retdev pointer to the allocated device (output) - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_device **retdev) { @@ -969,7 +969,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_ /** * Initialize global device list. * - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int mtd_devices_init(void) { @@ -983,7 +983,7 @@ static int mtd_devices_init(void) /* * Search global mtdids list and find id of requested type and number. * - * @return pointer to the id if it exists, NULL otherwise + * Return: pointer to the id if it exists, NULL otherwise */ static struct mtdids* id_find(u8 type, u8 num) { @@ -1007,7 +1007,7 @@ static struct mtdids* id_find(u8 type, u8 num) * * @param mtd_id string containing requested mtd_id * @param mtd_id_len length of supplied mtd_id - * @return pointer to the id if it exists, NULL otherwise + * Return: pointer to the id if it exists, NULL otherwise */ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_len) { @@ -1040,7 +1040,7 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_ * @param ret_id output pointer to next char after parse completes (output) * @param dev_type parsed device type (output) * @param dev_num parsed device number (output) - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num) @@ -1082,7 +1082,7 @@ int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, * * @param buf output buffer holding generated mtdparts string (output) * @param buflen buffer size - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int generate_mtdparts(char *buf, u32 buflen) { @@ -1207,7 +1207,7 @@ cleanup: * * @param buf output buffer holding generated mtdparts string (output) * @param buflen buffer size - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int generate_mtdparts_save(char *buf, u32 buflen) { @@ -1229,7 +1229,7 @@ static int generate_mtdparts_save(char *buf, u32 buflen) * * @param mtd the mtd info * @param part the partition - * @return the calculated net size of this partition + * Return: the calculated net size of this partition */ static uint64_t net_part_size(struct mtd_info *mtd, struct part_info *part) { @@ -1345,7 +1345,7 @@ static void list_partitions(void) * @param dev pointer to the requested device (output) * @param part_num verified partition number (output) * @param part pointer to requested partition (output) - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int find_dev_and_part(const char *id, struct mtd_device **dev, u8 *part_num, struct part_info **part) @@ -1405,7 +1405,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev, * Find and delete partition. For partition id format see find_dev_and_part(). * * @param id string describing device and partition - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int delete_partition(const char *id) { @@ -1481,7 +1481,7 @@ static void spread_partition(struct mtd_info *mtd, struct part_info *part, * as big as their mtdparts environment variable sizes and they each start * on a good block. * - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int spread_partitions(void) { @@ -1534,7 +1534,7 @@ static int spread_partitions(void) * buffer. gd->env_buf will be too small. * * @param buf temporary buffer pointer MTDPARTS_MAXLEN long - * @return mtdparts variable string, NULL if not found + * Return: mtdparts variable string, NULL if not found */ static const char *env_get_mtdparts(char *buf) { @@ -1550,7 +1550,7 @@ static const char *env_get_mtdparts(char *buf) * for each entry. Add created devices to the global devices list. * * @param mtdparts string specifing mtd partitions - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int parse_mtdparts(const char *const mtdparts) { @@ -1608,7 +1608,7 @@ static int parse_mtdparts(const char *const mtdparts) * to the global mtdids list. * * @param ids mapping string - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int parse_mtdids(const char *const ids) { @@ -1718,7 +1718,7 @@ static int parse_mtdids(const char *const ids) * Parse and initialize global mtdids mapping and create global * device/partition list. * - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ int mtdparts_init(void) { @@ -1868,7 +1868,7 @@ int mtdparts_init(void) * * @param dev device that is to be searched for a partition * @param part_num requested partition number - * @return pointer to the part_info, NULL otherwise + * Return: pointer to the part_info, NULL otherwise */ static struct part_info* mtd_part_info(struct mtd_device *dev, unsigned int part_num) { @@ -1915,7 +1915,7 @@ static struct part_info* mtd_part_info(struct mtd_device *dev, unsigned int part * @param flag command flag * @param argc number of arguments supplied to the command * @param argv arguments list - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int do_chpart(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) @@ -1954,7 +1954,7 @@ static int do_chpart(struct cmd_tbl *cmdtp, int flag, int argc, * @param flag command flag * @param argc number of arguments supplied to the command * @param argv arguments list - * @return 0 on success, 1 otherwise + * Return: 0 on success, 1 otherwise */ static int do_mtdparts(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) diff --git a/cmd/pci.c b/cmd/pci.c index 3b1863f139..389b41ccc3 100644 --- a/cmd/pci.c +++ b/cmd/pci.c @@ -317,7 +317,7 @@ static void pciinfo(struct udevice *bus, bool short_listing) * get_pci_dev() - Convert the "bus.device.function" identifier into a number * * @name: Device string in the form "bus.device.function" where each is in hex - * @return encoded pci_dev_t or -1 if the string was invalid + * Return: encoded pci_dev_t or -1 if the string was invalid */ static pci_dev_t get_pci_dev(char *name) { diff --git a/cmd/pinmux.c b/cmd/pinmux.c index 2d23357526..f17cf4110d 100644 --- a/cmd/pinmux.c +++ b/cmd/pinmux.c @@ -47,7 +47,7 @@ static int do_dev(struct cmd_tbl *cmdtp, int flag, int argc, * @param dev pinctrl device * @param name NULL to display all the pins * or name of the pin to display - * @return 0 on success, non-0 on error + * Return: 0 on success, non-0 on error */ static int show_pinmux(struct udevice *dev, char *name) { diff --git a/cmd/setexpr.c b/cmd/setexpr.c index 05d655809b..4d671e7ef1 100644 --- a/cmd/setexpr.c +++ b/cmd/setexpr.c @@ -140,7 +140,7 @@ static char *memstr(const char *s1, int l1, const char *s2, int l2) * @olen: Length of @old excluding terminator * @new: New string to replace @old with * @nlen: Length of @new excluding terminator - * @return pointer to immediately after the copied @new in @string, or NULL if + * Return: pointer to immediately after the copied @new in @string, or NULL if * no replacement took place */ static char *substitute(char *string, int *slen, int ssize, diff --git a/cmd/sf.c b/cmd/sf.c index 72246d912f..8bdebd9fd8 100644 --- a/cmd/sf.c +++ b/cmd/sf.c @@ -72,7 +72,7 @@ static int sf_parse_len_arg(char *arg, ulong *len) * * @param len amount of bytes currently processed * @param start_ms start time of processing in ms - * @return bytes per second if OK, 0 on error + * Return: bytes per second if OK, 0 on error */ static ulong bytes_per_second(unsigned int len, ulong start_ms) { @@ -166,7 +166,7 @@ static int do_spi_flash_probe(int argc, char *const argv[]) * @param buf buffer to write from * @param cmp_buf read buffer to use to compare data * @param skipped Count of skipped data (incremented by this function) - * @return NULL if OK, else a string containing the stage which failed + * Return: NULL if OK, else a string containing the stage which failed */ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset, size_t len, const char *buf, char *cmp_buf, size_t *skipped) @@ -208,7 +208,7 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset, * @param offset flash offset to write * @param len number of bytes to write * @param buf buffer to write from - * @return 0 if ok, 1 on error + * Return: 0 if ok, 1 on error */ static int spi_flash_update(struct spi_flash *flash, u32 offset, size_t len, const char *buf) @@ -438,7 +438,7 @@ static void spi_test_next_stage(struct test_info *test) * @param len Size of data to read/write * @param offset Offset within flash to check * @param vbuf Verification buffer - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int spi_flash_test(struct spi_flash *flash, uint8_t *buf, ulong len, ulong offset, uint8_t *vbuf) diff --git a/cmd/tpm-common.c b/cmd/tpm-common.c index 1d5442c06f..47adaffd18 100644 --- a/cmd/tpm-common.c +++ b/cmd/tpm-common.c @@ -46,7 +46,7 @@ void print_byte_string(u8 *data, size_t count) * NULL is passed, a large enough buffer will be allocated, * and the caller must free it. * @param count_ptr output variable for the length of byte string - * @return pointer to output buffer + * Return: pointer to output buffer */ void *parse_byte_string(char *bytes, u8 *data, size_t *count_ptr) { @@ -81,7 +81,7 @@ void *parse_byte_string(char *bytes, u8 *data, size_t *count_ptr) * report_return_code() - Report any error and return failure or success * * @param return_code TPM command return code - * @return value of enum command_ret_t + * Return: value of enum command_ret_t */ int report_return_code(int return_code) { @@ -97,7 +97,7 @@ int report_return_code(int return_code) * Return number of values defined by a type string. * * @param type_str type string - * @return number of values of type string + * Return: number of values of type string */ int type_string_get_num_values(const char *type_str) { @@ -108,7 +108,7 @@ int type_string_get_num_values(const char *type_str) * Return total size of values defined by a type string. * * @param type_str type string - * @return total size of values of type string, or 0 if type string + * Return: total size of values of type string, or 0 if type string * contains illegal type character. */ size_t type_string_get_space_size(const char *type_str) @@ -140,7 +140,7 @@ size_t type_string_get_space_size(const char *type_str) * * @param type_str type string * @param count pointer for storing size of buffer - * @return pointer to buffer or NULL on error + * Return: pointer to buffer or NULL on error */ void *type_string_alloc(const char *type_str, u32 *count) { @@ -164,7 +164,7 @@ void *type_string_alloc(const char *type_str, u32 *count) * @param type_str type string * @param values text strings of values to be packed * @param data output buffer of values - * @return 0 on success, non-0 on error + * Return: 0 on success, non-0 on error */ int type_string_pack(const char *type_str, char * const values[], u8 *data) @@ -202,7 +202,7 @@ int type_string_pack(const char *type_str, char * const values[], * @param type_str type string * @param data input buffer of values * @param vars names of environment variables - * @return 0 on success, non-0 on error + * Return: 0 on success, non-0 on error */ int type_string_write_vars(const char *type_str, u8 *data, char * const vars[]) diff --git a/common/autoboot.c b/common/autoboot.c index 6251c68310..b8861d5621 100644 --- a/common/autoboot.c +++ b/common/autoboot.c @@ -69,7 +69,7 @@ static int menukey; * before starting to enter the password. * * @etime: Timeout value ticks (stop when get_ticks() reachs this) - * @return 0 if autoboot should continue, 1 if it should stop + * Return: 0 if autoboot should continue, 1 if it should stop */ static int passwd_abort_crypt(uint64_t etime) { @@ -143,7 +143,7 @@ static int slow_equals(u8 *a, u8 *b, int len) * This checks for the user entering a SHA256 hash within a given time. * * @etime: Timeout value ticks (stop when get_ticks() reachs this) - * @return 0 if autoboot should continue, 1 if it should stop + * Return: 0 if autoboot should continue, 1 if it should stop */ static int passwd_abort_sha256(uint64_t etime) { @@ -219,7 +219,7 @@ static int passwd_abort_sha256(uint64_t etime) * This checks for the user entering a string within a given time. * * @etime: Timeout value ticks (stop when get_ticks() reachs this) - * @return 0 if autoboot should continue, 1 if it should stop + * Return: 0 if autoboot should continue, 1 if it should stop */ static int passwd_abort_key(uint64_t etime) { @@ -315,7 +315,7 @@ static void flush_stdin(void) * sha256-fallback has been enabled via the config setting * `AUTOBOOT_SHA256_FALLBACK`. * - * @return `false` if we must not fall-back, `true` if plain sha256 should be tried + * Return: `false` if we must not fall-back, `true` if plain sha256 should be tried */ static bool fallback_to_sha256(void) { diff --git a/common/board_r.c b/common/board_r.c index 60eced6f7f..c24d9b4e22 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -418,7 +418,7 @@ static int initr_pvblock(void) * NOTE: Loading the environment early can be a bad idea if security is * important, since no verification is done on the environment. * - * @return 0 if environment should not be loaded, !=0 if it is ok to load + * Return: 0 if environment should not be loaded, !=0 if it is ok to load */ static int should_load_env(void) { diff --git a/common/bootstage.c b/common/bootstage.c index 4621105682..0fd33be97e 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -230,7 +230,7 @@ uint32_t bootstage_accum(enum bootstage_id id) * @param buf Buffer to put name if needed * @param len Length of buffer * @param rec Boot stage record to get the name from - * @return pointer to name, either from the record or pointing to buf. + * Return: pointer to name, either from the record or pointing to buf. */ static const char *get_record_name(char *buf, int len, const struct bootstage_record *rec) @@ -273,7 +273,7 @@ static int h_compare_record(const void *r1, const void *r2) * Add all bootstage timings to a device tree. * * @param blob Device tree blob - * @return 0 on success, != 0 on failure. + * Return: 0 on success, != 0 on failure. */ static int add_bootstages_devicetree(struct fdt_header *blob) { diff --git a/common/cli.c b/common/cli.c index d86046a728..a7e3d84b68 100644 --- a/common/cli.c +++ b/common/cli.c @@ -27,7 +27,7 @@ * * @param cmd Command to run * @param flag Execution flags (CMD_FLAG_...) - * @return 0 on success, or != 0 on error. + * Return: 0 on success, or != 0 on error. */ int run_command(const char *cmd, int flag) { @@ -54,7 +54,7 @@ int run_command(const char *cmd, int flag) * * @param cmd Command to run * @param flag Execution flags (CMD_FLAG_...) - * @return 0 (not repeatable) or 1 (repeatable) on success, -1 on error. + * Return: 0 (not repeatable) or 1 (repeatable) on success, -1 on error. */ int run_command_repeatable(const char *cmd, int flag) { diff --git a/common/command.c b/common/command.c index 95af73f17b..41c91c6d8c 100644 --- a/common/command.c +++ b/common/command.c @@ -570,7 +570,7 @@ int cmd_discard_repeatable(struct cmd_tbl *cmdtp, int flag, int argc, * @param argc Number of arguments (arg 0 must be the command text) * @param argv Arguments * @param repeatable Can the command be repeated - * @return 0 if command succeeded, else non-zero (CMD_RET_...) + * Return: 0 if command succeeded, else non-zero (CMD_RET_...) */ static int cmd_call(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[], int *repeatable) diff --git a/common/console.c b/common/console.c index 2bccc8ab10..92b1c93be1 100644 --- a/common/console.c +++ b/common/console.c @@ -213,7 +213,7 @@ static int console_setfile(int file, struct stdio_dev * dev) * console_dev_is_serial() - Check if a stdio device is a serial device * * @sdev: Device to check - * @return true if this device is in the serial uclass (or for pre-driver-model, + * Return: true if this device is in the serial uclass (or for pre-driver-model, * whether it is called "serial". */ static bool console_dev_is_serial(struct stdio_dev *sdev) diff --git a/common/edid.c b/common/edid.c index fa85bcd6a1..556c4e3434 100644 --- a/common/edid.c +++ b/common/edid.c @@ -139,7 +139,7 @@ static void decode_timing(u8 *buf, struct display_timing *timing) /** * Check if HDMI vendor specific data block is present in CEA block * @param info CEA extension block - * @return true if block is found + * Return: true if block is found */ static bool cea_is_hdmi_vsdb_present(struct edid_cea861_info *info) { @@ -274,7 +274,7 @@ int edid_get_timing(u8 *buf, int buf_size, struct display_timing *timing, * Snip the tailing whitespace/return of a string. * * @param string The string to be snipped - * @return the snipped string + * Return: the snipped string */ static char *snip(char *string) { diff --git a/common/fdt_support.c b/common/fdt_support.c index c6b93e7889..efbd900e1f 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -2049,7 +2049,7 @@ int fdt_overlay_apply_verbose(void *fdt, void *fdto) * fdt_valid() - Check if an FDT is valid. If not, change it to NULL * * @blobp: Pointer to FDT pointer - * @return 1 if OK, 0 if bad (in which case *blobp is set to NULL) + * Return: 1 if OK, 0 if bad (in which case *blobp is set to NULL) */ int fdt_valid(struct fdt_header **blobp) { diff --git a/common/hash.c b/common/hash.c index 79202e18a2..9e53545dbd 100644 --- a/common/hash.c +++ b/common/hash.c @@ -500,7 +500,7 @@ static void store_result(struct hash_algo *algo, const uint8_t *sum, * @allow_env_vars: non-zero to permit storing the result to an environment * variable. If 0 then verify_str is assumed to be an * address, and the * prefix is not expected. - * @return 0 if ok, non-zero on error + * Return: 0 if ok, non-zero on error */ static int parse_verify_sum(struct hash_algo *algo, char *verify_str, uint8_t *vsum, int allow_env_vars) diff --git a/common/log.c b/common/log.c index 1aaa6c1527..f7e0c0fbf5 100644 --- a/common/log.c +++ b/common/log.c @@ -147,7 +147,7 @@ bool log_has_file(const char *file_list, const char *file) * * @ldev: Log device to check * @rec: Log record to check - * @return true if @rec is not blocked by the filters in @ldev, false if it is + * Return: true if @rec is not blocked by the filters in @ldev, false if it is */ static bool log_passes_filters(struct log_device *ldev, struct log_rec *rec) { @@ -390,7 +390,7 @@ int log_remove_filter(const char *drv_name, int filter_num) * log_find_device_by_drv() - Find a device by its driver * * @drv: Log driver - * @return Device associated with that driver, or NULL if not found + * Return: Device associated with that driver, or NULL if not found */ static struct log_device *log_find_device_by_drv(struct log_driver *drv) { diff --git a/common/spl/spl.c b/common/spl/spl.c index c5360f30ae..4bb9455efb 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -446,7 +446,7 @@ static inline int write_spl_handoff(void) { return 0; } * get_bootstage_id() - Get the bootstage ID to emit * * @start: true if this is for starting SPL, false for ending it - * @return bootstage ID to use + * Return: bootstage ID to use */ static enum bootstage_id get_bootstage_id(bool start) { @@ -617,7 +617,7 @@ static int spl_load_image(struct spl_image_info *spl_image, * @spl_image: Place to put the image details if successful * @spl_boot_list: List of boot devices to try * @count: Number of elements in spl_boot_list - * @return 0 if OK, -ENODEV if there were no boot devices + * Return: 0 if OK, -ENODEV if there were no boot devices * if CONFIG_SHOW_ERRORS is enabled, returns -ENXIO if there were * devices but none worked */ @@ -883,7 +883,7 @@ __weak void spl_relocate_stack_check(void) * All of this is done using the same layout and alignments as done in * board_init_f_init_reserve() / board_init_f_alloc_reserve(). * - * @return new stack location, or 0 to use the same stack + * Return: new stack location, or 0 to use the same stack */ ulong spl_relocate_stack_gd(void) { diff --git a/common/stdio.c b/common/stdio.c index 0f2eb6f0d6..976f51c252 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -144,7 +144,7 @@ struct list_head* stdio_get_list(void) * @name: stdio device name (e.g. "vidconsole") * id: Uclass ID of device to look for (e.g. UCLASS_VIDEO) * @sdevp: Returns stdout device, if found, else NULL - * @return 0 if found, -ENOENT if no device found with that name, other -ve + * Return: 0 if found, -ENOENT if no device found with that name, other -ve * on other error */ static int stdio_probe_device(const char *name, enum uclass_id id, diff --git a/disk/part.c b/disk/part.c index 99f592d96c..49e39a24e8 100644 --- a/disk/part.c +++ b/disk/part.c @@ -713,7 +713,7 @@ int part_get_info_by_name(struct blk_desc *dev_desc, const char *name, * @param[in] dev_part_str Input string argument, like "0.1#misc" * @param[out] dev_desc Place to store the device description pointer * @param[out] part_info Place to store the partition information - * @return 0 on success, or a negative on error + * Return: 0 on success, or a negative on error */ static int part_get_info_by_dev_and_name(const char *dev_iface, const char *dev_part_str, diff --git a/disk/part_efi.c b/disk/part_efi.c index 3809333078..611654fa18 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -331,7 +331,7 @@ static int part_test_efi(struct blk_desc *dev_desc) * set_protective_mbr(): Set the EFI protective MBR * @param dev_desc - block device descriptor * - * @return - zero on success, otherwise error + * Return: - zero on success, otherwise error */ static int set_protective_mbr(struct blk_desc *dev_desc) { diff --git a/drivers/block/blk-uclass.c b/drivers/block/blk-uclass.c index a055387570..bee1cd6f0d 100644 --- a/drivers/block/blk-uclass.c +++ b/drivers/block/blk-uclass.c @@ -172,7 +172,7 @@ struct blk_desc *blk_get_by_device(struct udevice *dev) * @if_type: Interface type * @devnum: Device number (0 = first) * @descp: Returns block device descriptor on success - * @return 0 on success, -ENODEV if there is no such device and no device + * Return: 0 on success, -ENODEV if there is no such device and no device * with a higher device number, -ENOENT if there is no such device but there * is one with a higher number, or other -ve on other error. */ diff --git a/drivers/block/blk_legacy.c b/drivers/block/blk_legacy.c index e3ee778c29..df9a359754 100644 --- a/drivers/block/blk_legacy.c +++ b/drivers/block/blk_legacy.c @@ -52,7 +52,7 @@ const char *blk_get_if_type_name(enum if_type if_type) * @drv: Legacy block driver * @devnum: Device number (0 = first) * @descp: Returns block device descriptor on success - * @return 0 on success, -ENODEV if there is no such device, -ENOSYS if the + * Return: 0 on success, -ENODEV if there is no such device, -ENOSYS if the * driver does not provide a way to find a device, or other -ve on other * error. */ diff --git a/drivers/clk/aspeed/clk_ast2500.c b/drivers/clk/aspeed/clk_ast2500.c index 97f00f505d..a1b4496ca2 100644 --- a/drivers/clk/aspeed/clk_ast2500.c +++ b/drivers/clk/aspeed/clk_ast2500.c @@ -91,7 +91,7 @@ static ulong ast2500_get_clkin(struct ast2500_scu *scu) * @scu SCU registers * @uart_index UART index, 1-5 * - * @return current setting for uart clock rate + * Return: current setting for uart clock rate */ static ulong ast2500_get_uart_clk_rate(struct ast2500_scu *scu, int uart_index) { @@ -216,7 +216,7 @@ static bool ast2500_get_clock_config_default(ulong input_rate, * The result (the best config we could find), would also be returned * in this structure. * - * @return The clock rate, when the resulting div_config is used. + * Return: The clock rate, when the resulting div_config is used. */ static ulong ast2500_calc_clock_config(ulong input_rate, ulong requested_rate, struct ast2500_div_config *cfg) diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c index 3fb8d68d64..f191b0f317 100644 --- a/drivers/clk/aspeed/clk_ast2600.c +++ b/drivers/clk/aspeed/clk_ast2600.c @@ -481,7 +481,7 @@ static ulong ast2600_clk_get_rate(struct clk *clk) /** * @brief lookup PLL divider config by input/output rate * @param[in] *pll - PLL descriptor - * @return true - if PLL divider config is found, false - else + * Return: true - if PLL divider config is found, false - else * The function caller shall fill "pll->in" and "pll->out", * then this function will search the lookup table * to find a valid PLL divider configuration. diff --git a/drivers/clk/microchip/mpfs_clk.h b/drivers/clk/microchip/mpfs_clk.h index 8e3fc55ae3..442562a5e7 100644 --- a/drivers/clk/microchip/mpfs_clk.h +++ b/drivers/clk/microchip/mpfs_clk.h @@ -13,7 +13,7 @@ * @base: base address of the mpfs system register. * @clk_rate: the mpfs pll clock rate. * @parent_name: a pointer to parent clock name. - * @return zero on success, or a negative error code. + * Return: zero on success, or a negative error code. */ int mpfs_clk_register_cfgs(void __iomem *base, u32 clk_rate, const char *parent_name); @@ -23,7 +23,7 @@ int mpfs_clk_register_cfgs(void __iomem *base, u32 clk_rate, * @base: base address of the mpfs system register. * @clk_rate: the mpfs pll clock rate. * @parent_name: a pointer to parent clock name. - * @return zero on success, or a negative error code. + * Return: zero on success, or a negative error code. */ int mpfs_clk_register_periphs(void __iomem *base, u32 clk_rate, const char *parent_name); @@ -35,7 +35,7 @@ int mpfs_clk_register_periphs(void __iomem *base, u32 clk_rate, * @table: a pointer to clock divider table. * @width: width of the divider bit field. * @flags: common clock framework flags. - * @return divider value on success, or a negative error code. + * Return: divider value on success, or a negative error code. */ int divider_get_val(unsigned long rate, unsigned long parent_rate, const struct clk_div_table *table, diff --git a/drivers/core/acpi.c b/drivers/core/acpi.c index 2176d8b836..e988a65ec5 100644 --- a/drivers/core/acpi.c +++ b/drivers/core/acpi.c @@ -109,7 +109,7 @@ int acpi_get_path(const struct udevice *dev, char *out_path, int maxlen) * @dev: Device that generated the data * @type: Table type it refers to * @start: The start of the data (the end is obtained from ctx->current) - * @return 0 if OK, -ENOSPC if too many items, -ENOMEM if out of memory + * Return: 0 if OK, -ENOSPC if too many items, -ENOMEM if out of memory */ static int acpi_add_item(struct acpi_ctx *ctx, struct udevice *dev, enum gen_type_t type, void *start) @@ -179,7 +179,7 @@ static struct acpi_item *find_acpi_item(const char *devname) * @start: Start position to put the sorted items. The items will follow each * other in sorted order * @type: Type of items to sort - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int sort_acpi_item_type(struct acpi_ctx *ctx, void *start, enum gen_type_t type) diff --git a/drivers/core/device-remove.c b/drivers/core/device-remove.c index 69c50da44a..e6ec6ff421 100644 --- a/drivers/core/device-remove.c +++ b/drivers/core/device-remove.c @@ -170,7 +170,7 @@ void device_free(struct udevice *dev) * * @flags: Flags passed to device_remove() * @drv_flags: Driver flags - * @return 0 if the device should be removed, + * Return: 0 if the device should be removed, * -EKEYREJECTED if @flags includes a flag in DM_REMOVE_ACTIVE_ALL but * @drv_flags does not (indicates that this device has nothing to do for * DMA shutdown or OS prepare) diff --git a/drivers/core/device.c b/drivers/core/device.c index d917d4e82d..901c1e2f7d 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -346,7 +346,7 @@ static void *alloc_priv(int size, uint flags) * device_alloc_priv() - Allocate priv/plat data required by the device * * @dev: Device to process - * @return 0 if OK, -ENOMEM if out of memory + * Return: 0 if OK, -ENOMEM if out of memory */ static int device_alloc_priv(struct udevice *dev) { diff --git a/drivers/core/lists.c b/drivers/core/lists.c index d2e9dc5719..22ccd9faaa 100644 --- a/drivers/core/lists.c +++ b/drivers/core/lists.c @@ -161,7 +161,7 @@ int device_bind_driver_to_node(struct udevice *parent, const char *drv_name, * @param of_match: List of compatible strings to match * @param of_idp: Returns the match that was found * @param compat: The compatible string to search for - * @return 0 if there is a match, -ENOENT if no match + * Return: 0 if there is a match, -ENOENT if no match */ static int driver_check_compatible(const struct udevice_id *of_match, const struct udevice_id **of_idp, diff --git a/drivers/core/of_access.c b/drivers/core/of_access.c index 3707143ae6..c20b19cb50 100644 --- a/drivers/core/of_access.c +++ b/drivers/core/of_access.c @@ -463,7 +463,7 @@ struct device_node *of_find_node_by_phandle(phandle handle) * @propname: name of the property to be searched. * @len: requested length of property value * - * @return the property value on success, -EINVAL if the property does not + * Return: the property value on success, -EINVAL if the property does not * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the * property data isn't large enough. */ diff --git a/drivers/core/root.c b/drivers/core/root.c index 815173f86e..e3f87956d8 100644 --- a/drivers/core/root.c +++ b/drivers/core/root.c @@ -257,7 +257,7 @@ int dm_scan_plat(bool pre_reloc_only) * @node: Node to scan * @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC * flag. If false bind all drivers. - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int dm_scan_fdt_node(struct udevice *parent, ofnode parent_node, bool pre_reloc_only) diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index 336ea8d243..2578803b7a 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -46,7 +46,7 @@ struct uclass *uclass_find(enum uclass_id key) * uclass_add() - Create new uclass in list * @id: Id number to create * @ucp: Returns pointer to uclass, or NULL on error - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error * * The new uclass is added to the list. There must be only one uclass for * each id. diff --git a/drivers/crypto/ace_sha.h b/drivers/crypto/ace_sha.h index a671b925b6..ad9e81a586 100644 --- a/drivers/crypto/ace_sha.h +++ b/drivers/crypto/ace_sha.h @@ -306,7 +306,7 @@ struct exynos_ace_sfr { * should allocate at least 32 bytes at pOut in advance. * @param hash_type SHA1 or SHA256 * - * @return 0 on Success, -1 on Failure (Timeout) + * Return: 0 on Success, -1 on Failure (Timeout) */ int ace_sha_hash_digest(const uchar * in_addr, uint buflen, uchar * out_addr, uint hash_type); diff --git a/drivers/crypto/fsl/fsl_hash.c b/drivers/crypto/fsl/fsl_hash.c index 8039473012..2379b70c2d 100644 --- a/drivers/crypto/fsl/fsl_hash.c +++ b/drivers/crypto/fsl/fsl_hash.c @@ -57,7 +57,7 @@ static enum caam_hash_algos get_hash_type(struct hash_algo *algo) * * @ctxp: Pointer to the pointer of the context for hashing * @caam_algo: Enum for SHA1 or SHA256 - * @return 0 if ok, -ENOMEM on error + * Return: 0 if ok, -ENOMEM on error */ static int caam_hash_init(void **ctxp, enum caam_hash_algos caam_algo) { @@ -80,7 +80,7 @@ static int caam_hash_init(void **ctxp, enum caam_hash_algos caam_algo) * @size: Size of the buffer being hashed * @is_last: 1 if this is the last update; 0 otherwise * @caam_algo: Enum for SHA1 or SHA256 - * @return 0 if ok, -EINVAL on error + * Return: 0 if ok, -EINVAL on error */ static int caam_hash_update(void *hash_ctx, const void *buf, unsigned int size, int is_last, @@ -126,7 +126,7 @@ static int caam_hash_update(void *hash_ctx, const void *buf, * @dest_buf: Pointer to the destination buffer where hash is to be copied * @size: Size of the buffer being hashed * @caam_algo: Enum for SHA1 or SHA256 - * @return 0 if ok, -EINVAL on error + * Return: 0 if ok, -EINVAL on error */ static int caam_hash_finish(void *hash_ctx, void *dest_buf, int size, enum caam_hash_algos caam_algo) diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index c350b32856..542b1652d8 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -22,7 +22,7 @@ * Secure memory run command * * @param sec_mem_cmd Secure memory command register - * @return cmd_status Secure memory command status register + * Return: cmd_status Secure memory command status register */ uint32_t secmem_set_cmd(uint32_t sec_mem_cmd) { @@ -52,7 +52,7 @@ uint32_t secmem_set_cmd(uint32_t sec_mem_cmd) * * @param page Number of the page to allocate. * @param partition Number of the partition to allocate. - * @return 0 on success, ERROR_IN_PAGE_ALLOC otherwise + * Return: 0 on success, ERROR_IN_PAGE_ALLOC otherwise */ int caam_page_alloc(uint8_t page_num, uint8_t partition_num) { diff --git a/drivers/fastboot/fb_getvar.c b/drivers/fastboot/fb_getvar.c index d43f2cfee6..018989dd16 100644 --- a/drivers/fastboot/fb_getvar.c +++ b/drivers/fastboot/fb_getvar.c @@ -96,7 +96,7 @@ static const struct { * @param[in] part_name Info for which partition name to look for * @param[in,out] response Pointer to fastboot response buffer * @param[out] size If not NULL, will contain partition size - * @return Partition number or negative value on error + * Return: Partition number or negative value on error */ static int getvar_get_part_info(const char *part_name, char *response, size_t *size) diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c index 2738dc836e..2710879812 100644 --- a/drivers/fastboot/fb_mmc.c +++ b/drivers/fastboot/fb_mmc.c @@ -289,7 +289,7 @@ static void fb_mmc_boot_ops(struct blk_desc *dev_desc, void *buffer, * @param[in] info Boot partition info * @param[out] hdr Where to store read boot image header * - * @return Boot image header sectors count or 0 on error + * Return: Boot image header sectors count or 0 on error */ static lbaint_t fb_mmc_get_boot_header(struct blk_desc *dev_desc, struct disk_partition *info, @@ -336,7 +336,7 @@ static lbaint_t fb_mmc_get_boot_header(struct blk_desc *dev_desc, * @param download_buffer Address to fastboot buffer with zImage in it * @param download_bytes Size of fastboot buffer, in bytes * - * @return 0 on success or -1 on error + * Return: 0 on success or -1 on error */ static int fb_mmc_update_zimage(struct blk_desc *dev_desc, void *download_buffer, diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 1c5e2e7976..125ae53d61 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -53,7 +53,7 @@ static void gpio_desc_init(struct gpio_desc *desc, * * @gpio: The numeric representation of the GPIO * @desc: Returns description (desc->flags will always be 0) - * @return 0 if found, -ENOENT if not found + * Return: 0 if found, -ENOENT if not found */ static int gpio_to_device(unsigned int gpio, struct gpio_desc *desc) { @@ -659,7 +659,7 @@ static int check_dir_flags(ulong flags) * * @desc: GPIO description * @flags: flags value to set - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int _dm_gpio_set_flags(struct gpio_desc *desc, ulong flags) { diff --git a/drivers/gpio/iproc_gpio.c b/drivers/gpio/iproc_gpio.c index 8c143e9b75..7187d3257b 100644 --- a/drivers/gpio/iproc_gpio.c +++ b/drivers/gpio/iproc_gpio.c @@ -123,7 +123,7 @@ static u32 iproc_get_pctrl_from_gpio(struct iproc_gpio_plat *plat, u32 gpio) * in private data structure to use it later while enabling gpio. * * @dev: pointer to GPIO device - * @return 0 on success and -ENOMEM on failure + * Return: 0 on success and -ENOMEM on failure */ static int iproc_get_gpio_pctrl_mapping(struct udevice *dev) { diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index cdbc40d48f..caefb1447c 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -225,7 +225,7 @@ static const struct dm_gpio_ops gpio_sunxi_ops = { * GPIO banks are named A, B, C, ... * * @bank: Bank number (0, 1..n-1) - * @return allocated string containing the name + * Return: allocated string containing the name */ static char *gpio_bank_name(int bank) { diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index e00f104b9f..4291e496fa 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -264,7 +264,7 @@ static const struct dm_gpio_ops gpio_tegra_ops = { * GPIOs are named A, B, C, ..., Z, AA, BB, CC, ... * * @base_port: Base port number (0, 1..n-1) - * @return allocated string containing the name + * Return: allocated string containing the name */ static char *gpio_port_name(int base_port) { diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index d95f77649e..1aae6b64ba 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -57,7 +57,7 @@ enum { * * @ic_clk: Input clock in Hz * @period_ns: Period to represent, in ns - * @return calculated count + * Return: calculated count */ static uint calc_counts(uint ic_clk, uint period_ns) { @@ -123,7 +123,7 @@ static const struct i2c_mode_info info_for_mode[] = { * @ic_clk: IC clock speed in Hz * @spk_cnt: Spike-suppression count * @config: Returns value to use - * @return 0 if OK, -EINVAL if the calculation failed due to invalid data + * Return: 0 if OK, -EINVAL if the calculation failed due to invalid data */ static int dw_i2c_calc_timing(struct dw_i2c *priv, enum i2c_speed_mode mode, int ic_clk, int spk_cnt, @@ -202,7 +202,7 @@ static int dw_i2c_calc_timing(struct dw_i2c *priv, enum i2c_speed_mode mode, * @speed: Required i2c speed in Hz * @bus_clk: Input clock to the I2C controller in Hz (e.g. IC_CLK) * @config: Returns the config to use for this speed - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int calc_bus_speed(struct dw_i2c *priv, struct i2c_regs *regs, int speed, ulong bus_clk, struct dw_i2c_speed_config *config) @@ -271,7 +271,7 @@ static int calc_bus_speed(struct dw_i2c *priv, struct i2c_regs *regs, int speed, * @i2c_base: Registers for the I2C controller * @speed: Required i2c speed in Hz * @bus_clk: Input clock to the I2C controller in Hz (e.g. IC_CLK) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int _dw_i2c_set_bus_speed(struct dw_i2c *priv, struct i2c_regs *i2c_base, unsigned int speed, unsigned int bus_clk) diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h index b56d7dd22f..a9c50c90ac 100644 --- a/drivers/i2c/designware_i2c.h +++ b/drivers/i2c/designware_i2c.h @@ -223,7 +223,7 @@ int designware_i2c_of_to_plat(struct udevice *bus); * @dev: I2C bus to check * @speed_hz: Requested speed in Hz * @config: Returns config to use for that speed - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dw_i2c_gen_speed_config(const struct udevice *dev, int speed_hz, struct dw_i2c_speed_config *config); diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c index 71bc2b5b8a..5539becc19 100644 --- a/drivers/i2c/i2c-uclass.c +++ b/drivers/i2c/i2c-uclass.c @@ -53,7 +53,7 @@ void i2c_dump_msgs(struct i2c_msg *msg, int nmsgs) * @offset: Byte offset within chip * @offset_buf: Place to put byte offset * @msg: Message buffer - * @return 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the + * Return: 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the * message is still set up but will not contain an offset. */ static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset, @@ -268,7 +268,7 @@ int dm_i2c_reg_clrset(struct udevice *dev, uint offset, u32 clr, u32 set) * @bus: Bus to probe * @chip_addr: Chip address to probe * @flags: Flags for the chip - * @return 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip + * Return: 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip * does not respond to probe */ static int i2c_probe_chip(struct udevice *bus, uint chip_addr, diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index ff21e3c52b..bad4b1484f 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -177,7 +177,7 @@ enum mvtwsi_ack_flags { * calc_tick() - Calculate the duration of a clock cycle from the I2C speed * * @speed: The speed in Hz to calculate the clock cycle duration for. - * @return The duration of a clock cycle in ns. + * Return: The duration of a clock cycle in ns. */ inline uint calc_tick(uint speed) { @@ -192,7 +192,7 @@ inline uint calc_tick(uint speed) * twsi_get_base() - Get controller register base for specified adapter * * @adap: Adapter to get the register base for. - * @return Register base for the specified adapter. + * Return: Register base for the specified adapter. */ static struct mvtwsi_registers *twsi_get_base(struct i2c_adapter *adap) { @@ -251,7 +251,7 @@ enum mvtwsi_error_class { * @lc: The last value of the control register. * @ls: The last value of the status register. * @es: The expected value of the status register. - * @return The generated error code. + * Return: The generated error code. */ inline uint mvtwsi_error(uint ec, uint lc, uint ls, uint es) { @@ -264,7 +264,7 @@ inline uint mvtwsi_error(uint ec, uint lc, uint ls, uint es) /* * twsi_wait() - Wait for I2C bus interrupt flag and check status, or time out. * - * @return Zero if status is as expected, or a non-zero code if either a time + * Return: Zero if status is as expected, or a non-zero code if either a time * out occurred, or the status was not the expected one. */ static int twsi_wait(struct mvtwsi_registers *twsi, int expected_status, @@ -312,7 +312,7 @@ static int twsi_wait(struct mvtwsi_registers *twsi, int expected_status, * @expected_status: The I2C bus status expected to be asserted after the * operation completion. * @tick: The duration of a clock cycle at the current I2C speed. - * @return Zero if status is as expected, or a non-zero code if either a time + * Return: Zero if status is as expected, or a non-zero code if either a time * out occurred or the status was not the expected one. */ static int twsi_start(struct mvtwsi_registers *twsi, int expected_status, @@ -335,7 +335,7 @@ static int twsi_start(struct mvtwsi_registers *twsi, int expected_status, * @expected_status: The I2C bus status expected to be asserted after the * operation completion. * @tick: The duration of a clock cycle at the current I2C speed. - * @return Zero if status is as expected, or a non-zero code if either a time + * Return: Zero if status is as expected, or a non-zero code if either a time * out occurred or the status was not the expected one. */ static int twsi_send(struct mvtwsi_registers *twsi, u8 byte, @@ -360,7 +360,7 @@ static int twsi_send(struct mvtwsi_registers *twsi, u8 byte, * @ack_flag: Flag that determines whether the received byte should * be acknowledged by the controller or not (sent ACK/NAK). * @tick: The duration of a clock cycle at the current I2C speed. - * @return Zero if status is as expected, or a non-zero code if either a time + * Return: Zero if status is as expected, or a non-zero code if either a time * out occurred or the status was not the expected one. */ static int twsi_recv(struct mvtwsi_registers *twsi, u8 *byte, int ack_flag, @@ -391,7 +391,7 @@ static int twsi_recv(struct mvtwsi_registers *twsi, u8 *byte, int ack_flag, * * @twsi: The MVTWSI register structure to use. * @tick: The duration of a clock cycle at the current I2C speed. - * @return Zero if the operation succeeded, or a non-zero code if a time out + * Return: Zero if the operation succeeded, or a non-zero code if a time out * occurred. */ static int twsi_stop(struct mvtwsi_registers *twsi, uint tick) @@ -422,7 +422,7 @@ static int twsi_stop(struct mvtwsi_registers *twsi, uint tick) * * @n: Parameter 'n' for the frequency calculation algorithm. * @m: Parameter 'm' for the frequency calculation algorithm. - * @return The I2C frequency corresponding to the passed m and n parameters. + * Return: The I2C frequency corresponding to the passed m and n parameters. */ static uint twsi_calc_freq(const int n, const int m) { @@ -458,7 +458,7 @@ static void twsi_reset(struct mvtwsi_registers *twsi) * @twsi: The MVTWSI register structure to use. * @requested_speed: The desired frequency the controller should run at * in Hz. - * @return The actual frequency the controller was configured to. + * Return: The actual frequency the controller was configured to. */ static uint __twsi_i2c_set_bus_speed(struct mvtwsi_registers *twsi, uint requested_speed) @@ -500,7 +500,7 @@ static uint __twsi_i2c_set_bus_speed(struct mvtwsi_registers *twsi, * @slaveadd: The I2C address to be set for the I2C master. * @actual_speed: A output parameter that receives the actual frequency * in Hz the controller was set to by the function. - * @return Zero if the operation succeeded, or a non-zero code if a time out + * Return: Zero if the operation succeeded, or a non-zero code if a time out * occurred. */ static void __twsi_i2c_init(struct mvtwsi_registers *twsi, int speed, @@ -539,7 +539,7 @@ static void __twsi_i2c_init(struct mvtwsi_registers *twsi, int speed, * @addr: The address byte to be sent. * @tick: The duration of a clock cycle at the current * I2C speed. - * @return Zero if the operation succeeded, or a non-zero code if a time out or + * Return: Zero if the operation succeeded, or a non-zero code if a time out or * unexpected I2C status occurred. */ static int i2c_begin(struct mvtwsi_registers *twsi, int expected_start_status, @@ -571,7 +571,7 @@ static int i2c_begin(struct mvtwsi_registers *twsi, int expected_start_status, * @twsi: The MVTWSI register structure to use. * @chip: The chip address to probe. * @tick: The duration of a clock cycle at the current I2C speed. - * @return Zero if the operation succeeded, or a non-zero code if a time out or + * Return: Zero if the operation succeeded, or a non-zero code if a time out or * unexpected I2C status occurred. */ static int __twsi_i2c_probe_chip(struct mvtwsi_registers *twsi, uchar chip, @@ -610,7 +610,7 @@ static int __twsi_i2c_probe_chip(struct mvtwsi_registers *twsi, uchar chip, * a size of at least 'length' bytes). * @length: The amount of data to be read from the chip in bytes. * @tick: The duration of a clock cycle at the current I2C speed. - * @return Zero if the operation succeeded, or a non-zero code if a time out or + * Return: Zero if the operation succeeded, or a non-zero code if a time out or * unexpected I2C status occurred. */ static int __twsi_i2c_read(struct mvtwsi_registers *twsi, uchar chip, @@ -659,7 +659,7 @@ static int __twsi_i2c_read(struct mvtwsi_registers *twsi, uchar chip, * @data: The buffer containing the data to be sent to the chip. * @length: The length of data to be sent to the chip in bytes. * @tick: The duration of a clock cycle at the current I2C speed. - * @return Zero if the operation succeeded, or a non-zero code if a time out or + * Return: Zero if the operation succeeded, or a non-zero code if a time out or * unexpected I2C status occurred. */ static int __twsi_i2c_write(struct mvtwsi_registers *twsi, uchar chip, diff --git a/drivers/i2c/octeon_i2c.c b/drivers/i2c/octeon_i2c.c index ea2cc33f9d..50199ff46e 100644 --- a/drivers/i2c/octeon_i2c.c +++ b/drivers/i2c/octeon_i2c.c @@ -193,7 +193,7 @@ static int twsi_stop(void *base); * * @code status code * @final_read true if this is the final read operation - * @return true if arbitration has been lost, false if it hasn't been lost. + * Return: true if arbitration has been lost, false if it hasn't been lost. */ static int twsi_i2c_lost_arb(u8 code, int final_read) { @@ -249,7 +249,7 @@ static int twsi_i2c_lost_arb(u8 code, int final_read) * * @base Base address of i2c registers * @val value to write - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static u64 twsi_write_sw(void __iomem *base, u64 val) { @@ -274,7 +274,7 @@ static u64 twsi_write_sw(void __iomem *base, u64 val) * * @base Base address of i2c registers * @val value for eia and op, etc. to read - * @return value of the register + * Return: value of the register */ static u64 twsi_read_sw(void __iomem *base, u64 val) { @@ -316,7 +316,7 @@ static void twsi_write_ctl(void __iomem *base, u8 data) * Reads the TWSI Control Register * * @base Base address for i2c - * @return 8-bit TWSI control register + * Return: 8-bit TWSI control register */ static u8 twsi_read_ctl(void __iomem *base) { @@ -334,7 +334,7 @@ static u8 twsi_read_ctl(void __iomem *base) * Read i2c status register * * @base Base address of i2c registers - * @return value of status register + * Return: value of status register */ static u8 twsi_read_status(void __iomem *base) { @@ -350,7 +350,7 @@ static u8 twsi_read_status(void __iomem *base) * Waits for an i2c operation to complete * * @param base Base address of registers - * @return 0 for success, 1 if timeout + * Return: 0 for success, 1 if timeout */ static int twsi_wait(void __iomem *base) { @@ -384,7 +384,7 @@ static int twsi_start_unstick(void __iomem *base) * Sends an i2c start condition * * @base base address of registers - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int twsi_start(void __iomem *base) { @@ -415,7 +415,7 @@ static int twsi_start(void __iomem *base) * Sends an i2c stop condition * * @base register base address - * @return 0 for success, -1 if error + * Return: 0 for success, -1 if error */ static int twsi_stop(void __iomem *base) { @@ -439,7 +439,7 @@ static int twsi_stop(void __iomem *base) * @slave_addr address of slave to write to * @buffer Pointer to buffer to write * @length Number of bytes in buffer to write - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int twsi_write_data(void __iomem *base, u8 slave_addr, u8 *buffer, unsigned int length) @@ -537,7 +537,7 @@ static void twsi_unblock(void __iomem *base) * @slave_addr i2c bus address to read from * @buffer buffer to read into * @length number of bytes to read - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int twsi_read_data(void __iomem *base, u8 slave_addr, u8 *buffer, unsigned int length) @@ -605,7 +605,7 @@ static int twsi_read_data(void __iomem *base, u8 slave_addr, * @speed Speed to set * @m_div Pointer to M divisor * @n_div Pointer to N divisor - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static void twsi_calc_div(struct udevice *bus, ulong sclk, unsigned int speed, int *m_div, int *n_div) @@ -651,7 +651,7 @@ static void twsi_calc_div(struct udevice *bus, ulong sclk, unsigned int speed, * * @base Base address of twsi registers * @slave_addr I2C slave address to configure this controller to - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int twsi_init(void __iomem *base, int slaveaddr) { @@ -681,7 +681,7 @@ static int twsi_init(void __iomem *base, int slaveaddr) * @bus i2c bus to transfer data over * @msg Array of i2c messages * @nmsgs Number of messages to send/receive - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int octeon_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) @@ -718,7 +718,7 @@ static int octeon_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, * * @bus i2c bus to transfer data over * @speed Speed in Hz to set - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int octeon_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) { @@ -773,7 +773,7 @@ static const struct octeon_i2c_data i2c_octeontx2_data = { * Driver probe function * * @dev I2C device to probe - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int octeon_i2c_probe(struct udevice *dev) { diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index e0f499d759..aaccb3aa22 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; * Wait til the byte transfer is completed. * * @param i2c- pointer to the appropriate i2c register bank. - * @return I2C_OK, if transmission was ACKED + * Return: I2C_OK, if transmission was ACKED * I2C_NACK, if transmission was NACKED * I2C_NOK_TIMEOUT, if transaction did not complete in I2C_TIMEOUT_MS */ diff --git a/drivers/input/cros_ec_keyb.c b/drivers/input/cros_ec_keyb.c index dc3b08c0f6..c485346373 100644 --- a/drivers/input/cros_ec_keyb.c +++ b/drivers/input/cros_ec_keyb.c @@ -38,7 +38,7 @@ struct cros_ec_keyb_priv { * @param keys List of keys that we have detected * @param max_count Maximum number of keys to return * @param samep Set to true if this scan repeats the last, else false - * @return number of pressed keys, 0 for none, -EIO on error + * Return: number of pressed keys, 0 for none, -EIO on error */ static int check_for_keys(struct udevice *dev, struct key_matrix_key *keys, int max_count, bool *samep) @@ -112,7 +112,7 @@ static int check_for_keys(struct udevice *dev, struct key_matrix_key *keys, * characters * * @param input Input configuration - * @return 1, to indicate that we have something to look at + * Return: 1, to indicate that we have something to look at */ int cros_ec_kbc_check(struct input_config *input) { @@ -176,7 +176,7 @@ int cros_ec_kbc_check(struct input_config *input) * @param blob Device tree blob * @param node Node to decode from * @param config Configuration data read from fdt - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int cros_ec_keyb_decode_fdt(struct udevice *dev, struct cros_ec_keyb_priv *config) diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c index d3743dc37f..3563dc9883 100644 --- a/drivers/input/i8042.c +++ b/drivers/input/i8042.c @@ -78,7 +78,7 @@ static int kbd_output_full(void) * check_leds() - Check the keyboard LEDs and update them it needed * * @ret: Value to return - * @return value of @ret + * Return: value of @ret */ static int i8042_kbd_update_leds(struct udevice *dev, int leds) { @@ -199,7 +199,7 @@ static void i8042_flush(void) * Disables the keyboard so that key strokes no longer generate scancodes to * the host. * - * @return 0 if ok, -1 if keyboard input was found while disabling + * Return: 0 if ok, -1 if keyboard input was found while disabling */ static int i8042_disable(void) { @@ -312,7 +312,7 @@ static int i8042_kbd_remove(struct udevice *dev) * wait for the keyboard to init. We do this only when a key is first * read - see kbd_wait_for_fifo_init(). * - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ static int i8042_kbd_probe(struct udevice *dev) { diff --git a/drivers/input/input.c b/drivers/input/input.c index c1c5e428dc..a4341e8c7c 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -253,7 +253,7 @@ int input_getc(struct input_config *config) * @param config Input state * @param key Key code to process * @param release 0 if a press, 1 if a release - * @return pointer to keycode->ascii translation table that should be used + * Return: pointer to keycode->ascii translation table that should be used */ static struct input_key_xlate *process_modifier(struct input_config *config, int key, int release) @@ -322,7 +322,7 @@ static struct input_key_xlate *process_modifier(struct input_config *config, * @param array Array to search * @param count Number of elements in array * @param key Key value to find - * @return element where value was first found, -1 if none + * Return: element where value was first found, -1 if none */ static int array_search(int *array, int count, int key) { @@ -347,7 +347,7 @@ static int array_search(int *array, int count, int key) * @param count Number of elements to sort * @param order Array containing ordering elements * @param ocount Number of ordering elements - * @return number of elements in dest that are in order (these will be at the + * Return: number of elements in dest that are in order (these will be at the * start of dest). */ static int sort_array_by_ordering(int *dest, int count, int *order, @@ -417,7 +417,7 @@ static int input_check_keycodes(struct input_config *config, * be at least ANSI_CHAR_MAX bytes long, to allow for * an ANSI sequence. * @param max_chars Maximum number of characters to add to output_ch - * @return number of characters output, if the key was converted, otherwise 0. + * Return: number of characters output, if the key was converted, otherwise 0. * This may be larger than max_chars, in which case the overflow * characters are not output. */ @@ -462,7 +462,7 @@ static int input_keycode_to_ansi364(struct input_config *config, * ANSI sequences. * @param max_chars Maximum number of characters to add to output_ch * @param same Number of key codes which are the same - * @return number of characters written into output_ch, or -1 if we would + * Return: number of characters written into output_ch, or -1 if we would * exceed max_chars chars. */ static int input_keycodes_to_ascii(struct input_config *config, diff --git a/drivers/input/key_matrix.c b/drivers/input/key_matrix.c index 4631728b8b..e2fb2e1707 100644 --- a/drivers/input/key_matrix.c +++ b/drivers/input/key_matrix.c @@ -22,7 +22,7 @@ * @param config Keyboard matrix config * @param keys List of keys to check * @param valid Number of valid keypresses to check - * @return 0 if no ghosting is possible, 1 if it is + * Return: 0 if no ghosting is possible, 1 if it is */ static int has_ghosting(struct key_matrix *config, struct key_matrix_key *keys, int valid) @@ -103,7 +103,7 @@ int key_matrix_decode(struct key_matrix *config, struct key_matrix_key keys[], * @param len Number of entries in keycode table * @param map_keycode Key code to find in the map * @param pos Returns position of map_keycode, if found, else -1 - * @return map Pointer to allocated map + * Return: map Pointer to allocated map */ static uchar *create_keymap(struct key_matrix *config, const u32 *data, int len, int map_keycode, int *pos) diff --git a/drivers/input/tegra-kbc.c b/drivers/input/tegra-kbc.c index 5113041d3e..d4741a7666 100644 --- a/drivers/input/tegra-kbc.c +++ b/drivers/input/tegra-kbc.c @@ -66,7 +66,7 @@ struct tegra_kbd_priv { * @param priv Keyboard private data * @param fifo Place to put fifo results * @param max_keycodes Maximum number of key codes to put in the fifo - * @return number of items put into fifo + * Return: number of items put into fifo */ static int tegra_kbc_find_keys(struct tegra_kbd_priv *priv, int *fifo, int max_keycodes) @@ -179,7 +179,7 @@ static void kbd_wait_for_fifo_init(struct tegra_kbd_priv *priv) * characters * * @param input Input configuration - * @return 1, to indicate that we have something to look at + * Return: 1, to indicate that we have something to look at */ static int tegra_kbc_check(struct input_config *input) { @@ -281,7 +281,7 @@ static int tegra_kbd_start(struct udevice *dev) * wait for the keyboard to init. We do this only when a key is first * read - see kbd_wait_for_fifo_init(). * - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ static int tegra_kbd_probe(struct udevice *dev) { diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c index c627c1df6c..e131eccd28 100644 --- a/drivers/misc/cros_ec.c +++ b/drivers/misc/cros_ec.c @@ -117,7 +117,7 @@ void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len) * * @param data Data block to checksum * @param size Size of data block in bytes - * @return checksum value (0 to 255) + * Return: checksum value (0 to 255) */ int cros_ec_calc_checksum(const uint8_t *data, int size) { @@ -138,7 +138,7 @@ int cros_ec_calc_checksum(const uint8_t *data, int size) * @param cmd_version Version of command to send (EC_VER_...) * @param dout Output data (may be NULL If dout_len=0) * @param dout_len Size of output data in bytes - * @return packet size in bytes, or <0 if error. + * Return: packet size in bytes, or <0 if error. */ static int create_proto3_request(struct cros_ec_dev *cdev, int cmd, int cmd_version, @@ -178,7 +178,7 @@ static int create_proto3_request(struct cros_ec_dev *cdev, * * @param dev CROS-EC device * @param din_len Maximum size of response in bytes - * @return maximum expected number of bytes in response, or <0 if error. + * Return: maximum expected number of bytes in response, or <0 if error. */ static int prepare_proto3_response_buffer(struct cros_ec_dev *cdev, int din_len) { @@ -202,7 +202,7 @@ static int prepare_proto3_response_buffer(struct cros_ec_dev *cdev, int din_len) * @param dev CROS-EC device * @param dinp Returns pointer to response data * @param din_len Maximum size of response in bytes - * @return number of bytes of response data, or <0 if error. Note that error + * Return: number of bytes of response data, or <0 if error. Note that error * codes can be from errno.h or -ve EC_RES_INVALID_CHECKSUM values (and they * overlap!) */ @@ -318,7 +318,7 @@ static int send_command(struct cros_ec_dev *dev, uint cmd, int cmd_version, * If not NULL, it will be updated to point to the data * and will always be double word aligned (64-bits) * @param din_len Maximum size of response in bytes - * @return number of bytes in response, or -ve on error + * Return: number of bytes in response, or -ve on error */ static int ec_command_inptr(struct udevice *dev, uint cmd, int cmd_version, const void *dout, int dout_len, @@ -385,7 +385,7 @@ static int ec_command_inptr(struct udevice *dev, uint cmd, * It not NULL, it is a place for ec_command() to copy the * data to. * @param din_len Maximum size of response in bytes - * @return number of bytes in response, or -ve on error + * Return: number of bytes in response, or -ve on error */ static int ec_command(struct udevice *dev, uint cmd, int cmd_version, const void *dout, int dout_len, @@ -872,7 +872,7 @@ int cros_ec_flash_erase(struct udevice *dev, uint32_t offset, uint32_t size) * @param data Pointer to data buffer to write * @param offset Offset within flash to write to. * @param size Number of bytes to write - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int cros_ec_flash_write_block(struct udevice *dev, const uint8_t *data, uint32_t offset, uint32_t size) @@ -913,7 +913,7 @@ static int cros_ec_flash_write_burst_size(struct udevice *dev) * * @param data Pointer to data to check (must be word-aligned) * @param size Number of bytes to check (must be word-aligned) - * @return 0 if erased, non-zero if any word is not erased + * Return: 0 if erased, non-zero if any word is not erased */ static int cros_ec_data_is_erased(const uint32_t *data, int size) { @@ -985,7 +985,7 @@ int cros_ec_flash_write(struct udevice *dev, const uint8_t *data, * * @param me CrosEc instance * @param region Region to run verification on - * @return 0 if success or not applicable. Non-zero if verification failed. + * Return: 0 if success or not applicable. Non-zero if verification failed. */ int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region) { @@ -1022,7 +1022,7 @@ int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region) * @param data Pointer to data buffer to read into * @param offset Offset within flash to read from * @param size Number of bytes to read - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int cros_ec_flash_read_block(struct udevice *dev, uint8_t *data, uint32_t offset, uint32_t size) diff --git a/drivers/misc/cros_ec_lpc.c b/drivers/misc/cros_ec_lpc.c index f40375978d..1a8a81349c 100644 --- a/drivers/misc/cros_ec_lpc.c +++ b/drivers/misc/cros_ec_lpc.c @@ -186,7 +186,7 @@ int cros_ec_lpc_command(struct udevice *udev, uint8_t cmd, int cmd_version, * * @param dev CROS_EC device * @param blob Device tree blob - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob) { diff --git a/drivers/misc/cros_ec_sandbox.c b/drivers/misc/cros_ec_sandbox.c index 2173517cff..8dbe0b188a 100644 --- a/drivers/misc/cros_ec_sandbox.c +++ b/drivers/misc/cros_ec_sandbox.c @@ -186,7 +186,7 @@ SANDBOX_STATE_IO(cros_ec, "google,cros-ec", cros_ec_read_state, * * @param ec Current emulated EC state * @param entry Flash map entry containing the image to check - * @return actual image size in bytes, 0 if the image contains no content or + * Return: actual image size in bytes, 0 if the image contains no content or * error. */ static int get_image_used(struct ec_state *ec, struct fmap_entry *entry) @@ -214,7 +214,7 @@ static int get_image_used(struct ec_state *ec, struct fmap_entry *entry) * * @param ec Current emulated EC state * @param node Keyboard node of device tree containing keyscan information - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int keyscan_read_fdt_matrix(struct ec_state *ec, ofnode node) { @@ -263,7 +263,7 @@ static int keyscan_read_fdt_matrix(struct ec_state *ec, ofnode node) * @param ec Current emulated EC state * @param scan Place to put keyscan bytes for the keyscan message (must hold * enough space for a full keyscan) - * @return number of bytes of valid scan data + * Return: number of bytes of valid scan data */ static int cros_ec_keyscan(struct ec_state *ec, uint8_t *scan) { @@ -305,7 +305,7 @@ static int cros_ec_keyscan(struct ec_state *ec, uint8_t *scan) * @param req_data Pointer to body of request * @param resp_hdr Pointer to place to put response header * @param resp_data Pointer to place to put response data, if any - * @return length of response data, or 0 for no response data, or -1 on error + * Return: length of response data, or 0 for no response data, or -1 on error */ static int process_cmd(struct ec_state *ec, struct ec_host_request *req_hdr, const void *req_data, diff --git a/drivers/misc/cros_ec_spi.c b/drivers/misc/cros_ec_spi.c index bbc96301ae..001f0a85ca 100644 --- a/drivers/misc/cros_ec_spi.c +++ b/drivers/misc/cros_ec_spi.c @@ -75,7 +75,7 @@ done: * @param dinp Returns pointer to response data. This will be * untouched unless we return a value > 0. * @param din_len Maximum size of response in bytes - * @return number of bytes in response, or -1 on error + * Return: number of bytes in response, or -1 on error */ int cros_ec_spi_command(struct udevice *udev, uint8_t cmd, int cmd_version, const uint8_t *dout, int dout_len, diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 4d9871d69f..f6ccd837aa 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -215,7 +215,7 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) * @data: additional data to send/receive * @retries: how many times to retry; mmc_send_cmd is always called at least * once - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ static int mmc_send_cmd_retry(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data, uint retries) @@ -239,7 +239,7 @@ static int mmc_send_cmd_retry(struct mmc *mmc, struct mmc_cmd *cmd, * @quirk: retry only if this quirk is enabled * @retries: how many times to retry; mmc_send_cmd is always called at least * once - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ static int mmc_send_cmd_quirks(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data, u32 quirk, uint retries) diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h index a6cd250d29..b32123758e 100644 --- a/drivers/mmc/mmc_private.h +++ b/drivers/mmc/mmc_private.h @@ -91,7 +91,7 @@ static inline void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd) /** * mmc_get_next_devnum() - Get the next available MMC device number * - * @return next available device number (0 = first), or -ve on error + * Return: next available device number (0 = first), or -ve on error */ int mmc_get_next_devnum(void);

@@ -117,7 +117,7 @@ void mmc_list_add(struct mmc *mmc); * * @mmc: MMC device * @part_num: Hardware partition number - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mmc_switch_part(struct mmc *mmc, unsigned int part_num);

@@ -128,7 +128,7 @@ int mmc_switch_part(struct mmc *mmc, unsigned int part_num); * @set: Unused * @index: Cmdarg index * @value: Cmdarg value - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value);

diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index e2d78794f2..bcea800e5f 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -83,7 +83,7 @@ struct mmc_spi_priv { * @resp_match: if true, compare each of received bytes with @resp_match_value * @resp_match_value: a value to be compared with each of received bytes * @r1b: if true, receive additional bytes for busy signal token - * @return 0 if OK, -ETIMEDOUT if no card response is received, -ve on error + * Return: 0 if OK, -ETIMEDOUT if no card response is received, -ve on error */ static int mmc_spi_sendcmd(struct udevice *dev, ushort cmdidx, u32 cmdarg, u32 resp_type, @@ -181,7 +181,7 @@ static int mmc_spi_sendcmd(struct udevice *dev, * @xbuf: buffer of the actual data (excluding token and crc) to read * @bcnt: number of data blocks to transfer * @bsize: size of the actual data (excluding token and crc) in bytes - * @return 0 if OK, -ECOMM if crc error, -ETIMEDOUT on other errors + * Return: 0 if OK, -ECOMM if crc error, -ETIMEDOUT on other errors */ static int mmc_spi_readdata(struct udevice *dev, void *xbuf, u32 bcnt, u32 bsize) @@ -239,7 +239,7 @@ static int mmc_spi_readdata(struct udevice *dev, * @bcnt: number of data blocks to transfer * @bsize: size of actual data (excluding token and crc) in bytes * @multi: indicate a transfer by multiple block write command (CMD25) - * @return 0 if OK, -ECOMM if crc error, -ETIMEDOUT on other errors + * Return: 0 if OK, -ECOMM if crc error, -ETIMEDOUT on other errors */ static int mmc_spi_writedata(struct udevice *dev, const void *xbuf, u32 bcnt, u32 bsize, int multi) diff --git a/drivers/mmc/octeontx_hsmmc.c b/drivers/mmc/octeontx_hsmmc.c index 2e569a9e0f..f0519f0cf8 100644 --- a/drivers/mmc/octeontx_hsmmc.c +++ b/drivers/mmc/octeontx_hsmmc.c @@ -780,7 +780,7 @@ static const struct octeontx_sd_mods octeontx_cr_types[] = { * @param mmc mmc device * @param cmd command information * - * @return octeontx_mmc_cr_mods data structure with various quirks and flags + * Return: octeontx_mmc_cr_mods data structure with various quirks and flags */ static struct octeontx_mmc_cr_mods octeontx_mmc_get_cr_mods(struct mmc *mmc, const struct mmc_cmd *cmd, @@ -993,7 +993,7 @@ static void octeontx_mmc_start_dma(struct mmc *mmc, bool write, * @param mmc mmc device * @param timeout timeout in ms * - * @return 0 for success (could be DMA errors), -ETIMEDOUT on timeout + * Return: 0 for success (could be DMA errors), -ETIMEDOUT on timeout */

/** @@ -1042,7 +1042,7 @@ static void octeontx_mmc_cleanup_dma(struct mmc *mmc, * @param timeout timeout in ms * @param verbose true to print out error information * - * @return 0 for success (could be DMA errors), -ETIMEDOUT on timeout + * Return: 0 for success (could be DMA errors), -ETIMEDOUT on timeout * or -EIO if IO error. */ static int octeontx_mmc_wait_dma(struct mmc *mmc, bool write, ulong timeout, @@ -1140,7 +1140,7 @@ static int octeontx_mmc_wait_dma(struct mmc *mmc, bool write, ulong timeout, * @param data data for read * @param verbose true to print out error information * - * @return number of blocks read or 0 if error + * Return: number of blocks read or 0 if error */ static int octeontx_mmc_read_blocks(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data, bool verbose) @@ -1342,7 +1342,7 @@ static ulong octeontx_mmc_write_blocks(struct mmc *mmc, struct mmc_cmd *cmd, * @param cmd cmd to send and response * @param data additional data * @param flags - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ static int octeontx_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) @@ -2021,7 +2021,7 @@ struct adj adj[] = { * @param adj parameter to tune * @param opcode command opcode to use * - * @return 0 for success, -1 if tuning failed + * Return: 0 for success, -1 if tuning failed */ static int octeontx_mmc_adjust_tuning(struct mmc *mmc, struct adj *adj, u32 opcode) @@ -2426,7 +2426,7 @@ static void octeontx_mmc_set_emm_timing(struct mmc *mmc, * Calculate the clock period with rounding up * * @param mmc mmc device - * @return clock period in system clocks for clk_lo + clk_hi + * Return: clock period in system clocks for clk_lo + clk_hi */ static u32 octeontx_mmc_calc_clk_period(struct mmc *mmc) { @@ -2916,7 +2916,7 @@ static void do_switch(struct mmc *mmc, union mio_emm_switch emm_switch) * * @param mmc Pointer to mmc data structure * - * @return 0 for success or -ETIMEDOUT on error + * Return: 0 for success or -ETIMEDOUT on error * * NOTE: On error a default value will be calculated. */ @@ -2942,7 +2942,7 @@ static int octeontx_mmc_calibrate_delay(struct mmc *mmc) * @param mmc mmc data structure * @param delay delay in picoseconds * - * @return Number of tap cycles or error if -1 + * Return: Number of tap cycles or error if -1 */ static int octeontx2_mmc_calc_delay(struct mmc *mmc, int delay) { @@ -3136,7 +3136,7 @@ static int octeontx_mmc_set_input_bus_timing(struct mmc *mmc) * * @param mmc mmc data structure * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ static int octeontx_mmc_set_output_bus_timing(struct mmc *mmc) { @@ -3369,7 +3369,7 @@ static void octeontx_mmc_switch_to(struct mmc *mmc) * * @param mmc mmc device * - * @return 0 for success + * Return: 0 for success * * NOTE: This will need to be updated when new silicon comes out */ @@ -3395,7 +3395,7 @@ static int octeontx_mmc_init_timing(struct mmc *mmc) * * @param mmc mmc device * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ static int octeontx_mmc_init_lowlevel(struct mmc *mmc) { @@ -3453,7 +3453,7 @@ static int octeontx_mmc_init_lowlevel(struct mmc *mmc) * * @param voltage voltage in microvolts * - * @return MMC register value for voltage + * Return: MMC register value for voltage */ static u32 xlate_voltage(u32 voltage) { @@ -3506,7 +3506,7 @@ static u32 xlate_voltage(u32 voltage) * * @param dev slot device to check * - * @return true if status reports "ok" or "okay" or if no status, + * Return: true if status reports "ok" or "okay" or if no status, * false otherwise. */ static bool octeontx_mmc_get_valid(struct udevice *dev) @@ -3524,7 +3524,7 @@ static bool octeontx_mmc_get_valid(struct udevice *dev) * * @param dev slot device * - * @return 0 on success, otherwise error + * Return: 0 on success, otherwise error */ static int octeontx_mmc_get_config(struct udevice *dev) { @@ -3705,7 +3705,7 @@ static int octeontx_mmc_get_config(struct udevice *dev) * * @param dev mmc device * - * @return 0 for success, error otherwise + * Return: 0 for success, error otherwise */ static int octeontx_mmc_slot_probe(struct udevice *dev) { @@ -3802,7 +3802,7 @@ U_BOOT_DRIVER(octeontx_hsmmc_slot) = { * * @param dev mmc host controller device * - * @return 0 for success, -1 on error + * Return: 0 for success, -1 on error */ static int octeontx_mmc_host_probe(struct udevice *dev) { @@ -3910,7 +3910,7 @@ static int octeontx_mmc_host_probe(struct udevice *dev) * * @param dev: MMC slot device * - * @return 0 for success, -1 on failure + * Return: 0 for success, -1 on failure * * Do some pre-initialization before probing a slot. */ diff --git a/drivers/mmc/sdhci-adma.c b/drivers/mmc/sdhci-adma.c index 2ec057fbb1..8213223d3f 100644 --- a/drivers/mmc/sdhci-adma.c +++ b/drivers/mmc/sdhci-adma.c @@ -64,7 +64,7 @@ void sdhci_prepare_adma_table(struct sdhci_adma_desc *table, /** * sdhci_adma_init() - initialize the ADMA descriptor table * - * @return pointer to the allocated descriptor table or NULL in case of an + * Return: pointer to the allocated descriptor table or NULL in case of an * error. */ struct sdhci_adma_desc *sdhci_adma_init(void) diff --git a/drivers/mtd/mtd_uboot.c b/drivers/mtd/mtd_uboot.c index 90767ec417..dd0b0242f9 100644 --- a/drivers/mtd/mtd_uboot.c +++ b/drivers/mtd/mtd_uboot.c @@ -54,7 +54,7 @@ static const char *get_mtdids(void) * @altname: Alternate name to return * @max_len: Length of the alternate name buffer * - * @return 0 on success, an error otherwise. + * Return: 0 on success, an error otherwise. */ int mtd_search_alternate_name(const char *mtdname, char *altname, unsigned int max_len) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 1d45fb55c7..aa78d41a55 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -850,7 +850,7 @@ EXPORT_SYMBOL_GPL(get_mtd_device_nm); * @param mtd an MTD device * @param offset offset in flash * @param length image length - * @return image length including bad blocks in *len_incl_bad and whether or not + * Return: image length including bad blocks in *len_incl_bad and whether or not * the length returned was truncated in *truncated */ void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset, diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index a435ce6d07..4119ea4ff6 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -89,7 +89,7 @@ bool mtd_partitions_used(struct mtd_info *master) * @mtdparts: String describing the partition with mtdparts command syntax * @partition: MTD partition structure to fill * - * @return 0 on success, an error otherwise. + * Return: 0 on success, an error otherwise. */ static int mtd_parse_partition(const char **_mtdparts, struct mtd_partition *partition) @@ -200,7 +200,7 @@ static int mtd_parse_partition(const char **_mtdparts, * caller. * @_nparts: Size of @_parts array. * - * @return 0 on success, an error otherwise. + * Return: 0 on success, an error otherwise. */ int mtd_parse_partitions(struct mtd_info *parent, const char **_mtdparts, struct mtd_partition **_parts, int *_nparts) diff --git a/drivers/mtd/nand/raw/cortina_nand.c b/drivers/mtd/nand/raw/cortina_nand.c index c5e97da5e0..88798f233e 100644 --- a/drivers/mtd/nand/raw/cortina_nand.c +++ b/drivers/mtd/nand/raw/cortina_nand.c @@ -83,7 +83,7 @@ static int nand_waitfor_cmd_completion(struct nand_ctlr *reg, unsigned int mask) * Read one byte from the chip * * @param mtd MTD device structure - * @return data byte + * Return: data byte * * Read function for 8bit bus-width */ @@ -504,7 +504,7 @@ static void ca_nand_command(struct mtd_info *mtd, unsigned int command, * Set up NAND bus width and page size * * @param info nand_info structure - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int set_bus_width_page_size(struct mtd_info *mtd) { @@ -724,7 +724,7 @@ static int ca_do_bch_encode(struct mtd_info *mtd, struct nand_chip *chip, * @param page page number * @param with_ecc 1 to enable ECC, 0 to disable ECC * @param is_writing 0 for read, 1 for write - * @return 0 when successfully completed + * Return: 0 when successfully completed * -ETIMEDOUT when command timeout */ static int nand_rw_page(struct mtd_info *mtd, struct nand_chip *chip, @@ -952,7 +952,7 @@ static int nand_rw_page(struct mtd_info *mtd, struct nand_chip *chip, * @param chip nand chip info structure * @param buf buffer to store read data * @param page page number to read - * @return 0 when successfully completed + * Return: 0 when successfully completed * -ETIMEDOUT when command timeout */ static int nand_read_page_hwecc(struct mtd_info *mtd, @@ -980,7 +980,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, * @param mtd mtd info structure * @param chip nand chip info structure * @param buf data buffer - * @return 0 when successfully completed + * Return: 0 when successfully completed * -ETIMEDOUT when command timeout */ static int nand_write_page_hwecc(struct mtd_info *mtd, @@ -1009,7 +1009,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, * @param chip nand chip info structure * @param buf buffer to store read data * @param page page number to read - * @return 0 when successfully completed + * Return: 0 when successfully completed * -ETIMEDOUT when command timeout */ static int nand_read_page_raw(struct mtd_info *mtd, @@ -1037,7 +1037,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, * @param mtd mtd info structure * @param chip nand chip info structure * @param buf data buffer - * @return 0 when successfully completed + * Return: 0 when successfully completed * -ETIMEDOUT when command timeout */ static int nand_write_page_raw(struct mtd_info *mtd, @@ -1067,7 +1067,7 @@ static int nand_write_page_raw(struct mtd_info *mtd, * @param page page number to read * @param with_ecc 1 to enable ECC, 0 to disable ECC * @param is_writing 0 for read, 1 for write - * @return 0 when successfully completed + * Return: 0 when successfully completed * -ETIMEDOUT when command timeout */ static int nand_rw_oob(struct mtd_info *mtd, struct nand_chip *chip, @@ -1137,7 +1137,7 @@ static int nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) * @param mtd mtd info structure * @param chip nand chip info structure * @param page page number to write - * @return 0 when successfully completed + * Return: 0 when successfully completed * -ETIMEDOUT when command timeout */ static int nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip, @@ -1239,7 +1239,7 @@ static void nand_config_flash_type(struct nand_chip *nand) * config oob layout * * @param chip nand chip info structure - * @return 0 when successfully completed + * Return: 0 when successfully completed * -EINVAL when ECC bytes exceed OOB size */ static int nand_config_oob_layout(struct nand_chip *nand) diff --git a/drivers/mtd/nand/raw/nand_util.c b/drivers/mtd/nand/raw/nand_util.c index 5409c9f322..5150607d8a 100644 --- a/drivers/mtd/nand/raw/nand_util.c +++ b/drivers/mtd/nand/raw/nand_util.c @@ -47,7 +47,7 @@ typedef struct mtd_info mtd_info_t; * * @param mtd nand mtd instance to erase * @param opts options, @see struct nand_erase_options - * @return 0 in case of success + * Return: 0 in case of success * * This code is ported from flash_eraseall.c from Linux mtd utils by * Arcom Control System Ltd. @@ -202,7 +202,7 @@ int nand_erase_opts(struct mtd_info *mtd, * @param mtd nand mtd instance * @param tight bring device in lock tight mode * - * @return 0 on success, -1 in case of error + * Return: 0 on success, -1 in case of error * * The lock / lock-tight command only applies to the whole chip. To get some * parts of the chip lock and others unlocked use the following sequence: @@ -258,7 +258,7 @@ int nand_lock(struct mtd_info *mtd, int tight) * @param mtd nand mtd instance * @param offset page address to query (must be page-aligned!) * - * @return -1 in case of error + * Return: -1 in case of error * >0 lock status: * bitfield with the following combinations: * NAND_LOCK_STATUS_TIGHT: page in tight state @@ -308,7 +308,7 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset) * page size mtd->writesize) * @param allexcept if set, unlock everything not selected * - * @return 0 on success, -1 in case of error + * Return: 0 on success, -1 in case of error */ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, int allexcept) @@ -405,7 +405,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, * @param offset offset in flash * @param length image length * @param used length of flash needed for the requested length - * @return 0 if the image fits and there are no bad blocks + * Return: 0 if the image fits and there are no bad blocks * 1 if the image fits, but there are bad blocks * -1 if the image does not fit */ @@ -476,7 +476,7 @@ static size_t drop_ffs(const struct mtd_info *mtd, const u_char *buf, * @param mtd nand mtd instance * @param ops MTD operations, including data to verify * @param ofs offset in flash - * @return 0 in case of success + * Return: 0 in case of success */ int nand_verify_page_oob(struct mtd_info *mtd, struct mtd_oob_ops *ops, loff_t ofs) @@ -517,7 +517,7 @@ int nand_verify_page_oob(struct mtd_info *mtd, struct mtd_oob_ops *ops, * @param ofs offset in flash * @param len buffer length * @param buf buffer to read from - * @return 0 in case of success + * Return: 0 in case of success */ int nand_verify(struct mtd_info *mtd, loff_t ofs, size_t len, u_char *buf) { @@ -568,7 +568,7 @@ int nand_verify(struct mtd_info *mtd, loff_t ofs, size_t len, u_char *buf) * exceed the buffer * @param buffer buffer to read from * @param flags flags modifying the behaviour of the write to NAND - * @return 0 in case of success + * Return: 0 in case of success */ int nand_write_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length, size_t *actual, loff_t lim, u_char *buffer, int flags) @@ -702,7 +702,7 @@ int nand_write_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length, * @param lim maximum size that actual may be in order to not exceed the * buffer * @param buffer buffer to write to - * @return 0 in case of success + * Return: 0 in case of success */ int nand_read_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length, size_t *actual, loff_t lim, u_char *buffer) @@ -793,7 +793,7 @@ int nand_read_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length, * @param buf buffer to check * @param patt the pattern to check * @param size buffer size in bytes - * @return 1 if there are only patt bytes in buf + * Return: 1 if there are only patt bytes in buf * 0 if something else was found */ static int check_pattern(const u_char *buf, u_char patt, int size) @@ -815,7 +815,7 @@ static int check_pattern(const u_char *buf, u_char patt, int size) * * @param mtd nand mtd instance * @param offset offset in flash - * @return 0 if the block is still good + * Return: 0 if the block is still good */ int nand_torture(struct mtd_info *mtd, loff_t offset) { diff --git a/drivers/mtd/nand/raw/octeontx_bch.c b/drivers/mtd/nand/raw/octeontx_bch.c index a41772880f..24ffa5105f 100644 --- a/drivers/mtd/nand/raw/octeontx_bch.c +++ b/drivers/mtd/nand/raw/octeontx_bch.c @@ -218,7 +218,7 @@ static const struct pci_device_id octeontx_bchvf_pci_id_table[] = { * @param[out] ecc 8-byte aligned pointer to where ecc data should go * @param[in] resp pointer to where responses will be written. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int octeontx_bch_encode(struct bch_vf *vf, dma_addr_t block, u16 block_size, u8 bch_level, dma_addr_t ecc, dma_addr_t resp) @@ -259,7 +259,7 @@ int octeontx_bch_encode(struct bch_vf *vf, dma_addr_t block, u16 block_size, * This should not be the same as block_ecc_in. * @param[in] resp pointer to where responses will be written. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */

int octeontx_bch_decode(struct bch_vf *vf, dma_addr_t block_ecc_in, diff --git a/drivers/mtd/nand/raw/octeontx_bch.h b/drivers/mtd/nand/raw/octeontx_bch.h index 3aaa52c264..95a9b7126f 100644 --- a/drivers/mtd/nand/raw/octeontx_bch.h +++ b/drivers/mtd/nand/raw/octeontx_bch.h @@ -75,7 +75,7 @@ int octeontx_bch_wait(struct bch_vf *vf, union bch_resp *resp, * @param[out] ecc 8-byte aligned pointer to where ecc data should go * @param[in] resp pointer to where responses will be written. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */ int octeontx_bch_encode(struct bch_vf *vf, dma_addr_t block, u16 block_size, u8 bch_level, dma_addr_t ecc, dma_addr_t resp); @@ -95,7 +95,7 @@ int octeontx_bch_encode(struct bch_vf *vf, dma_addr_t block, u16 block_size, * This should not be the same as block_ecc_in. * @param[in] resp pointer to where responses will be written. * - * @return Zero on success, negative on failure. + * Return: Zero on success, negative on failure. */

int octeontx_bch_decode(struct bch_vf *vf, dma_addr_t block_ecc_in, @@ -124,7 +124,7 @@ static inline void octeontx_bch_write_doorbell(u64 num_commands, * In this case, the initial probe returns success but the actual probing * is deferred until the BCH VF has been probed. * - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ int octeontx_pci_nand_deferred_probe(void);

diff --git a/drivers/mtd/nand/raw/octeontx_nand.c b/drivers/mtd/nand/raw/octeontx_nand.c index 75476c098f..ff363a56b5 100644 --- a/drivers/mtd/nand/raw/octeontx_nand.c +++ b/drivers/mtd/nand/raw/octeontx_nand.c @@ -2179,7 +2179,7 @@ int octeontx_pci_nand_disable(struct udevice *dev) * In this case, the initial probe returns success but the actual probing * is deferred until the BCH VF has been probed. * - * @return 0 for success, otherwise error + * Return: 0 for success, otherwise error */ int octeontx_pci_nand_deferred_probe(void) { diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c index 107447f9df..8b9ff4de18 100644 --- a/drivers/mtd/nand/raw/omap_gpmc.c +++ b/drivers/mtd/nand/raw/omap_gpmc.c @@ -117,7 +117,7 @@ static uint32_t gen_true_ecc(uint8_t *ecc_buf) * @read_ecc: ecc read from nand flash * @calc_ecc: ecc read from ECC registers * - * @return 0 if data is OK or corrected, else returns -1 + * Return: 0 if data is OK or corrected, else returns -1 */ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) @@ -488,7 +488,7 @@ static void omap_reverse_list(u8 *list, unsigned int length) * @read_ecc: ecc read from nand flash (ignored) * @calc_ecc: ecc read from ECC registers * - * @return 0 if data is OK or corrected, else returns -1 + * Return: 0 if data is OK or corrected, else returns -1 */ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c index 8e70c8e73b..d2801d48a3 100644 --- a/drivers/mtd/nand/raw/tegra_nand.c +++ b/drivers/mtd/nand/raw/tegra_nand.c @@ -152,7 +152,7 @@ static int nand_waitfor_cmd_completion(struct nand_ctlr *reg) * Read one byte from the chip * * @param mtd MTD device structure - * @return data byte + * Return: data byte * * Read function for 8bit bus-width */ @@ -466,7 +466,7 @@ static void stop_command(struct nand_ctlr *reg) * * @param info nand_info structure * @param *reg_val address of reg_val - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int set_bus_width_page_size(struct mtd_info *our_mtd, struct fdt_nand *config, u32 *reg_val) @@ -505,7 +505,7 @@ static int set_bus_width_page_size(struct mtd_info *our_mtd, * @param page page number * @param with_ecc 1 to enable ECC, 0 to disable ECC * @param is_writing 0 for read, 1 for write - * @return 0 when successfully completed + * Return: 0 when successfully completed * -EIO when command timeout */ static int nand_rw_page(struct mtd_info *mtd, struct nand_chip *chip, @@ -655,7 +655,7 @@ static int nand_rw_page(struct mtd_info *mtd, struct nand_chip *chip, * @param chip nand chip info structure * @param buf buffer to store read data * @param page page number to read - * @return 0 when successfully completed + * Return: 0 when successfully completed * -EIO when command timeout */ static int nand_read_page_hwecc(struct mtd_info *mtd, @@ -687,7 +687,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, * @param chip nand chip info structure * @param buf buffer to store read data * @param page page number to read - * @return 0 when successfully completed + * Return: 0 when successfully completed * -EINVAL when chip->oob_poi is not double-word aligned * -EIO when command timeout */ @@ -720,7 +720,7 @@ static int nand_write_page_raw(struct mtd_info *mtd, * @param page page number to read * @param with_ecc 1 to enable ECC, 0 to disable ECC * @param is_writing 0 for read, 1 for write - * @return 0 when successfully completed + * Return: 0 when successfully completed * -EINVAL when chip->oob_poi is not double-word aligned * -EIO when command timeout */ @@ -838,7 +838,7 @@ static int nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, * @param mtd mtd info structure * @param chip nand chip info structure * @param page page number to write - * @return 0 when successfully completed + * Return: 0 when successfully completed * -EINVAL when chip->oob_poi is not double-word aligned * -EIO when command timeout */ @@ -900,7 +900,7 @@ static void setup_timing(unsigned timing[FDT_NAND_TIMING_COUNT], * * @param dev Driver model device * @param config Device tree NAND configuration - * @return 0 if ok, -ve on error (FDT_ERR_...) + * Return: 0 if ok, -ve on error (FDT_ERR_...) */ static int fdt_decode_nand(struct udevice *dev, struct fdt_nand *config) { diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 56e1858de4..f94597c061 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -148,7 +148,7 @@ static void onenand_writew(unsigned short value, void __iomem * addr) * onenand_block_address - [DEFAULT] Get block address * @param device the device id * @param block the block - * @return translated block address if DDP, otherwise same + * Return: translated block address if DDP, otherwise same * * Setup Start Address 1 Register (F100h) */ @@ -165,7 +165,7 @@ static int onenand_block_address(struct onenand_chip *this, int block) * onenand_bufferram_address - [DEFAULT] Get bufferram address * @param device the device id * @param block the block - * @return set DBS value if DDP, otherwise 0 + * Return: set DBS value if DDP, otherwise 0 * * Setup Start Address 2 Register (F101h) for DDP */ @@ -182,7 +182,7 @@ static int onenand_bufferram_address(struct onenand_chip *this, int block) * onenand_page_address - [DEFAULT] Get page address * @param page the page address * @param sector the sector address - * @return combined page and sector address + * Return: combined page and sector address * * Setup Start Address 8 Register (F107h) */ @@ -202,7 +202,7 @@ static int onenand_page_address(int page, int sector) * @param dataram1 DataRAM index * @param sectors the sector address * @param count the number of sectors - * @return the start buffer value + * Return: the start buffer value * * Setup Start Buffer Register (F200h) */ @@ -511,7 +511,7 @@ static int onenand_wait(struct mtd_info *mtd, int state) * onenand_bufferram_offset - [DEFAULT] BufferRAM offset * @param mtd MTD data structure * @param area BufferRAM area - * @return offset given area + * Return: offset given area * * Return BufferRAM offset given area */ @@ -612,7 +612,7 @@ static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area, * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode * @param mtd MTD data structure * @param addr address to check - * @return blockpage address + * Return: blockpage address * * Get blockpage address at 2x program mode */ @@ -636,7 +636,7 @@ static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr) * onenand_check_bufferram - [GENERIC] Check BufferRAM information * @param mtd MTD data structure * @param addr address to check - * @return 1 if there are valid data, otherwise 0 + * Return: 1 if there are valid data, otherwise 0 * * Check bufferram if there is data we required */ diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 811bc275c1..985b038447 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -331,7 +331,7 @@ static int fec_tx_task_disable(struct fec_priv *fec) * @param[in] fec all we know about the device yet * @param[in] count receive buffer count to be allocated * @param[in] dsize desired size of each receive buffer - * @return 0 on success + * Return: 0 on success * * Init all RX descriptors to default values. */ @@ -703,7 +703,7 @@ static void fec_halt(struct eth_device *dev) * @param[in] dev Our ethernet device to handle * @param[in] packet Pointer to the data to be transmitted * @param[in] length Data count in bytes - * @return 0 on success + * Return: 0 on success */ #ifdef CONFIG_DM_ETH static int fecmxc_send(struct udevice *dev, void *packet, int length) @@ -854,7 +854,7 @@ out: /** * Pull one frame from the card * @param[in] dev Our ethernet device to handle - * @return Length of packet read + * Return: Length of packet read */ #ifdef CONFIG_DM_ETH static int fecmxc_recv(struct udevice *dev, int flags, uchar **packetp) diff --git a/drivers/net/octeontx2/cgx.c b/drivers/net/octeontx2/cgx.c index 189fe7c631..d139029f4e 100644 --- a/drivers/net/octeontx2/cgx.c +++ b/drivers/net/octeontx2/cgx.c @@ -52,7 +52,7 @@ char lmac_speed_to_str[][8] = { * * @param instance instance to find * - * @return pointer to lmac data structure or NULL if not found + * Return: pointer to lmac data structure or NULL if not found */ struct lmac *nix_get_cgx_lmac(int lmac_instance) { diff --git a/drivers/net/octeontx2/cgx.h b/drivers/net/octeontx2/cgx.h index f287692712..b1f6f067bf 100644 --- a/drivers/net/octeontx2/cgx.h +++ b/drivers/net/octeontx2/cgx.h @@ -82,7 +82,7 @@ static inline u64 cgx_read(struct cgx *cgx, u8 lmac, u64 offset) * * @param instance instance to find * - * @return pointer to lmac data structure or NULL if not found + * Return: pointer to lmac data structure or NULL if not found */ struct lmac *nix_get_cgx_lmac(int lmac_instance);

diff --git a/drivers/net/octeontx2/lmt.h b/drivers/net/octeontx2/lmt.h index 84a7eab814..3b30992cb6 100644 --- a/drivers/net/octeontx2/lmt.h +++ b/drivers/net/octeontx2/lmt.h @@ -15,7 +15,7 @@ * @param ptr address in memory to add incr to * @param incr amount to increment memory location by (signed) * - * @return Value of memory location before increment + * Return: Value of memory location before increment */ static inline s64 atomic_fetch_and_add64_nosync(s64 *ptr, s64 incr) { diff --git a/drivers/net/octeontx2/nix.c b/drivers/net/octeontx2/nix.c index 5954737b5c..a5665a25f2 100644 --- a/drivers/net/octeontx2/nix.c +++ b/drivers/net/octeontx2/nix.c @@ -36,7 +36,7 @@ * @param elem_size Size of each element * @param msg Text string to show when allocation fails * - * @return A valid memory location or NULL on failure + * Return: A valid memory location or NULL on failure */ static void *nix_memalloc(int num_elements, size_t elem_size, const char *msg) { diff --git a/drivers/net/octeontx2/nix_af.c b/drivers/net/octeontx2/nix_af.c index d513917ee7..cd098d6cd6 100644 --- a/drivers/net/octeontx2/nix_af.c +++ b/drivers/net/octeontx2/nix_af.c @@ -336,7 +336,7 @@ int npa_af_shutdown(struct npa_af *npa_af) * * @param nix Handle to setup * - * @return 0, or negative on failure + * Return: 0, or negative on failure */ static int nix_af_setup_sq(struct nix *nix) { @@ -445,7 +445,7 @@ static int nix_af_setup_sq(struct nix *nix) * @param cindex Context index * @param resp Result pointer * - * @return 0 for success, -EBUSY on failure + * Return: 0 for success, -EBUSY on failure */ static int nix_aq_issue_command(struct nix_af *nix_af, int lf, diff --git a/drivers/net/octeontx2/rvu.h b/drivers/net/octeontx2/rvu.h index c0a834b89a..62bc7a644a 100644 --- a/drivers/net/octeontx2/rvu.h +++ b/drivers/net/octeontx2/rvu.h @@ -101,7 +101,7 @@ int qmem_alloc(struct qmem *q, u32 qsize, size_t entry_sz); * @param inst_size Size of each instruction * @param res_size Size of each result * - * @return -ENOMEM on error, 0 on success + * Return: -ENOMEM on error, 0 on success */ int rvu_aq_alloc(struct admin_queue *aq, unsigned int qsize, size_t inst_size, size_t res_size); diff --git a/drivers/net/octeontx2/rvu_common.c b/drivers/net/octeontx2/rvu_common.c index 173b28ba4b..4d8173f5ba 100644 --- a/drivers/net/octeontx2/rvu_common.c +++ b/drivers/net/octeontx2/rvu_common.c @@ -41,7 +41,7 @@ void qmem_free(struct qmem *q) * @param inst_size Size of each instruction * @param res_size Size of each result * - * @return -ENOMEM on error, 0 on success + * Return: -ENOMEM on error, 0 on success */ int rvu_aq_alloc(struct admin_queue *aq, unsigned int qsize, size_t inst_size, size_t res_size) diff --git a/drivers/net/pfe_eth/pfe_driver.c b/drivers/net/pfe_eth/pfe_driver.c index 6f443b4ea8..5e14f82de5 100644 --- a/drivers/net/pfe_eth/pfe_driver.c +++ b/drivers/net/pfe_eth/pfe_driver.c @@ -25,7 +25,7 @@ static struct rx_desc_s *g_rx_desc; * @param[out] pkt_ptr - Pointer to store rx packet * @param[out] phy_port - Pointer to store recv phy port * - * @return -1 if no packet, else return length of packet. + * Return: -1 if no packet, else return length of packet. */ int pfe_recv(uchar **pkt_ptr, int *phy_port) { @@ -121,7 +121,7 @@ int pfe_eth_free_pkt(struct udevice *dev, uchar *packet, int length) * @param[in] data Pointer to the data * @param[in] length Length of the ethernet packet to be transferred. * - * @return -1 if tx Q is full, else returns the tx location where the pkt is + * Return: -1 if tx Q is full, else returns the tx location where the pkt is * placed. */ int pfe_send(int phy_port, void *data, int length) @@ -190,7 +190,7 @@ int pfe_send(int phy_port, void *data, int length) * locations * if success, moves the tx_to_send to next location. * - * @return -1 if TX ownership bit is not cleared by hw. + * Return: -1 if TX ownership bit is not cleared by hw. * else on success (tx done completion) return zero. */ int pfe_tx_done(void) @@ -557,7 +557,7 @@ static int pfe_hif_init(struct pfe_ddr_address *pfe_addr) * * @param[in] edev Pointer to eth device structure. * - * @return 0, on success. + * Return: 0, on success. */ static int pfe_hw_init(struct pfe_ddr_address *pfe_addr) { diff --git a/drivers/net/pfe_eth/pfe_eth.c b/drivers/net/pfe_eth/pfe_eth.c index 0c27a668b5..d338b363d5 100644 --- a/drivers/net/pfe_eth/pfe_eth.c +++ b/drivers/net/pfe_eth/pfe_eth.c @@ -101,7 +101,7 @@ static int pfe_eth_write_hwaddr(struct udevice *dev) * * @param[in] edev Pointer to eth device structure. * - * @return none + * Return: none */ static inline void pfe_eth_stop(struct udevice *dev) { diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c index 93e5ea55c7..6669048181 100644 --- a/drivers/net/pfe_eth/pfe_firmware.c +++ b/drivers/net/pfe_eth/pfe_firmware.c @@ -37,7 +37,7 @@ static const void *pfe_esbc_hdr_addr; * @param pe_mask Mask of PE id's to load firmware to * @param pfe_firmware Pointer to the firmware image * - * @return 0 on success, a negative value on error + * Return: 0 on success, a negative value on error */ static int pfe_load_elf(int pe_mask, uint8_t *pfe_firmware) { @@ -99,7 +99,7 @@ err: * @param size pointer to size of the firmware * @param fw_name pfe firmware name, either class or tmu * - * @return 0 on success, a negative value on error + * Return: 0 on success, a negative value on error */ static int pfe_get_fw(const void **data, size_t *size, char *fw_name) @@ -148,7 +148,7 @@ static int pfe_get_fw(const void **data, /* * Check PFE FIT image * - * @return 0 on success, a negative value on error + * Return: 0 on success, a negative value on error */ static int pfe_fit_check(void) { @@ -248,7 +248,7 @@ int pfe_spi_flash_init(void) * firmware files * Takes PE's out of reset * - * @return 0 on success, a negative value on error + * Return: 0 on success, a negative value on error */ int pfe_firmware_init(void) { diff --git a/drivers/net/pfe_eth/pfe_hw.c b/drivers/net/pfe_eth/pfe_hw.c index 722f5c238f..4db6f3158c 100644 --- a/drivers/net/pfe_eth/pfe_hw.c +++ b/drivers/net/pfe_eth/pfe_hw.c @@ -128,7 +128,7 @@ static void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, * @param[in] addr PMEM read address (must be aligned on size) * @param[in] size Number of bytes to read (maximum 4, must not * cross 32bit boundaries) - * @return the data read (in PE endianness, i.e BE). + * Return: the data read (in PE endianness, i.e BE). */ u32 pe_pmem_read(int id, u32 addr, u8 size) { @@ -176,7 +176,7 @@ void pe_dmem_write(int id, u32 val, u32 addr, u8 size) * @param[in] addr DMEM read address (must be aligned on size) * @param[in] size Number of bytes to read (maximum 4, must not * cross 32bit boundaries) - * @return the data read (in PE endianness, i.e BE). + * Return: the data read (in PE endianness, i.e BE). */ u32 pe_dmem_read(int id, u32 addr, u8 size) { @@ -222,7 +222,7 @@ static void class_bus_write(u32 val, u32 addr, u8 size) * through indirect access registers. * @param[in] addr Address to read from (must be aligned on size) * @param[in] size Number of bytes to read (1, 2 or 4) - * @return the read data + * Return: the read data */ static u32 class_bus_read(u32 addr, u8 size) { diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 5da3515f5f..c66cd756d9 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -76,7 +76,7 @@ pci_dev_t dm_pci_get_bdf(const struct udevice *dev) /** * pci_get_bus_max() - returns the bus number of the last active bus * - * @return last bus number, or -1 if no active buses + * Return: last bus number, or -1 if no active buses */ static int pci_get_bus_max(void) { @@ -700,7 +700,7 @@ static bool pci_match_one_id(const struct pci_device_id *id, * @bus: Bus to check * @vendor: Vendor ID to check * @device: Device ID to check - * @return true if the vendor/device is in the list, false if not + * Return: true if the vendor/device is in the list, false if not */ static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor, uint device) @@ -728,7 +728,7 @@ static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor, * @find_id: Specification of the driver to find * @bdf: Bus/device/function addreess - see PCI_BDF() * @devp: Returns a pointer to the device created - * @return 0 if OK, -EPERM if the device is not needed before relocation and + * Return: 0 if OK, -EPERM if the device is not needed before relocation and * therefore was not created, other -ve value on error */ static int pci_find_and_bind_driver(struct udevice *parent, diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c index 02a71da30f..a18251297f 100644 --- a/drivers/pci/pci_common.c +++ b/drivers/pci/pci_common.c @@ -236,7 +236,7 @@ int __pci_hose_phys_to_bus(struct pci_controller *hose, * @hose: PCI hose of the root PCI controller * @phys_addr: physical address to convert * @flags: flags of pci regions - * @return bus address if OK, 0 on error + * Return: bus address if OK, 0 on error */ pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose, phys_addr_t phys_addr, diff --git a/drivers/pci/pci_internal.h b/drivers/pci/pci_internal.h index 8b842f6fb4..5a4c90e619 100644 --- a/drivers/pci/pci_internal.h +++ b/drivers/pci/pci_internal.h @@ -39,7 +39,7 @@ void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus); * If the device is a bridge, downstream devices will be probed. * * @dev: Device to configure - * @return the maximum PCI bus number found by this device. If there are no + * Return: the maximum PCI bus number found by this device. If there are no * bridges, this just returns the device's bus number. If the device is a * bridge then it will return a larger number, depending on the devices on * that bridge. On error, returns a -ve error number. @@ -54,7 +54,7 @@ int dm_pciauto_config_device(struct udevice *dev); * * @busnum: PCI bus number to look up * @busp: Returns PCI bus on success - * @return 0 on success, or -ve error + * Return: 0 on success, or -ve error */ int pci_get_bus(int busnum, struct udevice **busp);

diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index 7bad4c82c0..f8b193058a 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -149,7 +149,7 @@ static int pci_rom_probe(struct udevice *dev, struct pci_rom_header **hdrp) * @ram_headerp: Returns a pointer to the image in RAM * @allocedp: Returns true if @ram_headerp was allocated and needs * to be freed - * @return 0 if OK, -ve on error. Note that @allocedp is set up regardless of + * Return: 0 if OK, -ve on error. Note that @allocedp is set up regardless of * the error state. Even if this function returns an error, it may have * allocated memory. */ diff --git a/drivers/pinctrl/intel/pinctrl.c b/drivers/pinctrl/intel/pinctrl.c index 987a56b715..1607000ded 100644 --- a/drivers/pinctrl/intel/pinctrl.c +++ b/drivers/pinctrl/intel/pinctrl.c @@ -60,7 +60,7 @@ * * @comm: Community to search * @gpio: Pad number to look up (assumed to be valid) - * @return offset, 0 for first GPIO in community + * Return: offset, 0 for first GPIO in community */ static size_t relative_pad_in_comm(const struct pad_community *comm, uint gpio) @@ -75,7 +75,7 @@ static size_t relative_pad_in_comm(const struct pad_community *comm, * * @comm: Community to search * @relative_pad: Pad to look up - * @return group number if found (see community_n_groups, etc.), or + * Return: group number if found (see community_n_groups, etc.), or * -ESPIPE if no groups, or -ENOENT if not found */ static int pinctrl_group_index(const struct pad_community *comm, @@ -135,7 +135,7 @@ static u32 pinctrl_bitmask_within_group(const struct pad_community *comm, * * @pad: Pad to check * @devp: Returns the device for that pad - * @return 0 if OK, -ENOTBLK if no device was found for the given pin + * Return: 0 if OK, -ENOTBLK if no device was found for the given pin */ static int pinctrl_get_device(uint pad, struct udevice **devp) { @@ -346,7 +346,7 @@ static const int mask[4] = { * * @dev: Pinctrl device containing the pad (see pinctrl_get_device()) * @cfg: Configuration to apply - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int pinctrl_configure_pad(struct udevice *dev, const struct pad_config *cfg) diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c index 4fba7b527c..6d62f6cae4 100644 --- a/drivers/power/exynos-tmu.c +++ b/drivers/power/exynos-tmu.c @@ -102,7 +102,7 @@ static struct tmu_info gbl_info; * then calculate and calibrate it's value * in degree celsius. * - * @return current temperature of the chip as sensed by TMU + * Return: current temperature of the chip as sensed by TMU */ static int get_cur_temp(struct tmu_info *info) { @@ -135,7 +135,7 @@ static int get_cur_temp(struct tmu_info *info) * Monitors status of the TMU device and exynos temperature * * @param temp pointer to the current temperature value - * @return enum tmu_status_t value, code indicating event to execute + * Return: enum tmu_status_t value, code indicating event to execute */ enum tmu_status_t tmu_monitor(int *temp) { @@ -177,7 +177,7 @@ enum tmu_status_t tmu_monitor(int *temp) * * @param info pointer to the tmu_info struct * @param blob FDT blob - * @return int value, 0 for success + * Return: int value, 0 for success */ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) { @@ -332,7 +332,7 @@ static void tmu_setup_parameters(struct tmu_info *info) * Initialize TMU device * * @param blob FDT blob - * @return int value, 0 for success + * Return: int value, 0 for success */ int tmu_init(const void *blob) { diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c index bf9173949c..0959445364 100644 --- a/drivers/power/palmas.c +++ b/drivers/power/palmas.c @@ -149,7 +149,7 @@ int twl603x_audio_power(u8 on) * @brief palmas_enable_ss_ldo - Configure EVM board specific configurations * for the USB Super speed SMPS10 regulator. * - * @return 0 + * Return: 0 */ int palmas_enable_ss_ldo(void) { diff --git a/drivers/power/regulator/tps65090_regulator.c b/drivers/power/regulator/tps65090_regulator.c index 174ee58d03..fa15e61a10 100644 --- a/drivers/power/regulator/tps65090_regulator.c +++ b/drivers/power/regulator/tps65090_regulator.c @@ -45,7 +45,7 @@ static int tps65090_fet_get_enable(struct udevice *dev) * @param pmic pmic structure for the tps65090 * @param fet_id FET number to set (1..MAX_FET_NUM) * @param set 1 to power on FET, 0 to power off - * @return -EIO if we got a comms error, -EAGAIN if the FET failed to + * Return: -EIO if we got a comms error, -EAGAIN if the FET failed to * change state. If all is ok, returns 0. */ static int tps65090_fet_set(struct udevice *pmic, int fet_id, bool set) diff --git a/drivers/power/tps6586x.c b/drivers/power/tps6586x.c index 49b28a5e6b..37f1c459a6 100644 --- a/drivers/power/tps6586x.c +++ b/drivers/power/tps6586x.c @@ -84,7 +84,7 @@ exit: * * @param sm0 Place to put SM0 voltage * @param sm1 Place to put SM1 voltage - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int read_voltages(int *sm0, int *sm1) { diff --git a/drivers/remoteproc/sandbox_testproc.c b/drivers/remoteproc/sandbox_testproc.c index 6836eca4c5..78b108184b 100644 --- a/drivers/remoteproc/sandbox_testproc.c +++ b/drivers/remoteproc/sandbox_testproc.c @@ -308,7 +308,7 @@ static int sandbox_testproc_ping(struct udevice *dev) * @dev: device to operate upon * @da: device address * @size: Size of the memory region @da is pointing to - * @return converted virtual address + * Return: converted virtual address */ static void *sandbox_testproc_device_to_virt(struct udevice *dev, ulong da, ulong size) diff --git a/drivers/remoteproc/stm32_copro.c b/drivers/remoteproc/stm32_copro.c index 4c5f24857e..5271f83bc0 100644 --- a/drivers/remoteproc/stm32_copro.c +++ b/drivers/remoteproc/stm32_copro.c @@ -30,7 +30,7 @@ struct stm32_copro_privdata { /** * stm32_copro_probe() - Basic probe * @dev: corresponding STM32 remote processor device - * @return 0 if all went ok, else corresponding -ve error + * Return: 0 if all went ok, else corresponding -ve error */ static int stm32_copro_probe(struct udevice *dev) { @@ -61,7 +61,7 @@ static int stm32_copro_probe(struct udevice *dev) * @dev: corresponding STM32 remote processor device * @da: device address * @size: Size of the memory region @da is pointing to - * @return converted virtual address + * Return: converted virtual address */ static void *stm32_copro_device_to_virt(struct udevice *dev, ulong da, ulong size) @@ -89,7 +89,7 @@ static void *stm32_copro_device_to_virt(struct udevice *dev, ulong da, * @dev: corresponding STM32 remote processor device * @addr: Address in memory where image is stored * @size: Size in bytes of the image - * @return 0 if all went ok, else corresponding -ve error + * Return: 0 if all went ok, else corresponding -ve error */ static int stm32_copro_load(struct udevice *dev, ulong addr, ulong size) { @@ -123,7 +123,7 @@ static int stm32_copro_load(struct udevice *dev, ulong addr, ulong size) /** * stm32_copro_start() - Start the STM32 remote processor * @dev: corresponding STM32 remote processor device - * @return 0 if all went ok, else corresponding -ve error + * Return: 0 if all went ok, else corresponding -ve error */ static int stm32_copro_start(struct udevice *dev) { @@ -157,7 +157,7 @@ static int stm32_copro_start(struct udevice *dev) /** * stm32_copro_reset() - Reset the STM32 remote processor * @dev: corresponding STM32 remote processor device - * @return 0 if all went ok, else corresponding -ve error + * Return: 0 if all went ok, else corresponding -ve error */ static int stm32_copro_reset(struct udevice *dev) { @@ -186,7 +186,7 @@ static int stm32_copro_reset(struct udevice *dev) /** * stm32_copro_stop() - Stop the STM32 remote processor * @dev: corresponding STM32 remote processor device - * @return 0 if all went ok, else corresponding -ve error + * Return: 0 if all went ok, else corresponding -ve error */ static int stm32_copro_stop(struct udevice *dev) { @@ -196,7 +196,7 @@ static int stm32_copro_stop(struct udevice *dev) /** * stm32_copro_is_running() - Is the STM32 remote processor running * @dev: corresponding STM32 remote processor device - * @return 0 if the remote processor is running, 1 otherwise + * Return: 0 if the remote processor is running, 1 otherwise */ static int stm32_copro_is_running(struct udevice *dev) { diff --git a/drivers/serial/serial_bcm283x_mu.c b/drivers/serial/serial_bcm283x_mu.c index 58fa722b4b..f0756c37c8 100644 --- a/drivers/serial/serial_bcm283x_mu.c +++ b/drivers/serial/serial_bcm283x_mu.c @@ -140,7 +140,7 @@ static const struct udevice_id bcm283x_mu_serial_id[] = { * The serial device will only work properly if it has been muxed to the serial * pins by firmware. Check whether that happened here. * - * @return true if serial device is muxed, false if not + * Return: true if serial device is muxed, false if not */ static bool bcm283x_is_serial_muxed(void) { diff --git a/drivers/serial/serial_bcm283x_pl011.c b/drivers/serial/serial_bcm283x_pl011.c index 2d2e970316..fe746294cd 100644 --- a/drivers/serial/serial_bcm283x_pl011.c +++ b/drivers/serial/serial_bcm283x_pl011.c @@ -17,7 +17,7 @@ * The serial device will only work properly if it has been muxed to the serial * pins by firmware. Check whether that happened here. * - * @return true if serial device is muxed, false if not + * Return: true if serial device is muxed, false if not */ static bool bcm283x_is_serial_muxed(void) { diff --git a/drivers/sound/hda_codec.c b/drivers/sound/hda_codec.c index eb92830ad9..af6148ef72 100644 --- a/drivers/sound/hda_codec.c +++ b/drivers/sound/hda_codec.c @@ -302,7 +302,7 @@ int hda_codecs_init(struct udevice *dev, struct hda_regs *regs, u32 codec_mask) * @regs: HDA registers * @val: Command to write * @response: Set to response from codec - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int exec_verb(struct hda_regs *regs, uint val, uint *response) { @@ -324,7 +324,7 @@ static int exec_verb(struct hda_regs *regs, uint val, uint *response) * @nid: Parent node ID to check * @num_sub_nodesp: Returns number of subnodes * @start_sub_node_nidp: Returns start subnode number - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int get_subnode_info(struct hda_regs *regs, uint nid, uint *num_sub_nodesp, uint *start_sub_node_nidp) @@ -354,7 +354,7 @@ static int get_subnode_info(struct hda_regs *regs, uint nid, * * @regs: HDA registers * @group_nid: Group node ID to check - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static uint find_beep_node_in_group(struct hda_regs *regs, uint group_nid) { @@ -395,7 +395,7 @@ static uint find_beep_node_in_group(struct hda_regs *regs, uint group_nid) * Checks if the given audio group contains a beep generator * @regs: HDA registers * @nid: Node ID to check - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int audio_group_has_beep_node(struct hda_regs *regs, uint nid) { @@ -424,7 +424,7 @@ static int audio_group_has_beep_node(struct hda_regs *regs, uint nid) * instead. * * @dev: Sound device - * @return Node ID >0 if found, -ve error code otherwise + * Return: Node ID >0 if found, -ve error code otherwise */ static int get_hda_beep_nid(struct udevice *dev) { @@ -461,7 +461,7 @@ static int get_hda_beep_nid(struct udevice *dev) * * @priv: Device's private data * @divider: Divider value (0 to disable the beep) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int set_beep_divisor(struct hda_codec_priv *priv, uint divider) { diff --git a/drivers/sound/max98088.c b/drivers/sound/max98088.c index 4bcb7482b2..c0463b8e8a 100644 --- a/drivers/sound/max98088.c +++ b/drivers/sound/max98088.c @@ -30,7 +30,7 @@ static const int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, * @param rate sampling rate * @param value address of indexvalue to be stored * - * @return 0 for success or negative error code. + * Return: 0 for success or negative error code. */ static int rate_value(int rate, u8 *value) { @@ -54,7 +54,7 @@ static int rate_value(int rate, u8 *value) * @rate: Sampling rate * @bits_per_sample: Bits per sample * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ int max98088_hw_params(struct maxim_priv *priv, unsigned int rate, unsigned int bits_per_sample) @@ -115,7 +115,7 @@ int max98088_hw_params(struct maxim_priv *priv, unsigned int rate, * @priv: max98088 information * @freq: Sampling frequency in Hz * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ int max98088_set_sysclk(struct maxim_priv *priv, unsigned int freq) { @@ -163,7 +163,7 @@ int max98088_set_sysclk(struct maxim_priv *priv, unsigned int freq) * @priv: max98088 information * @fmt: i2S format - supports a subset of the options defined in i2s.h. * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ int max98088_set_fmt(struct maxim_priv *priv, int fmt) { @@ -241,7 +241,7 @@ int max98088_set_fmt(struct maxim_priv *priv, int fmt) * max98088_reset() - reset the audio codec * * @priv: max98088 information - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ static int max98088_reset(struct maxim_priv *priv) { @@ -278,7 +278,7 @@ static int max98088_reset(struct maxim_priv *priv) * * @priv: max98088 information * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ static int max98088_device_init(struct maxim_priv *priv) { diff --git a/drivers/sound/max98090.c b/drivers/sound/max98090.c index c77a732277..a798762f1e 100644 --- a/drivers/sound/max98090.c +++ b/drivers/sound/max98090.c @@ -25,7 +25,7 @@ * @rate: Sampling rate * @bits_per_sample: Bits per sample * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ int max98090_hw_params(struct maxim_priv *priv, unsigned int rate, unsigned int bits_per_sample) @@ -77,7 +77,7 @@ int max98090_hw_params(struct maxim_priv *priv, unsigned int rate, * @priv: max98090 information * @freq: Sampling frequency in Hz * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ int max98090_set_sysclk(struct maxim_priv *priv, unsigned int freq) { @@ -122,7 +122,7 @@ int max98090_set_sysclk(struct maxim_priv *priv, unsigned int freq) * @priv: max98090 information * @fmt: i2S format - supports a subset of the options defined in i2s.h. * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ int max98090_set_fmt(struct maxim_priv *priv, int fmt) { @@ -205,7 +205,7 @@ int max98090_set_fmt(struct maxim_priv *priv, int fmt) * resets the audio codec * * @priv: max98090 information - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ static int max98090_reset(struct maxim_priv *priv) { @@ -231,7 +231,7 @@ static int max98090_reset(struct maxim_priv *priv) * * @priv: max98090 information * - * @return -EIO for error, 0 for success. + * Return: -EIO for error, 0 for success. */ int max98090_device_init(struct maxim_priv *priv) { diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c index 002dab437f..d0f701aaf1 100644 --- a/drivers/sound/max98095.c +++ b/drivers/sound/max98095.c @@ -29,7 +29,7 @@ int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000, * @param rate sampling rate * @param value address of indexvalue to be stored * - * @return 0 for success or negative error code. + * Return: 0 for success or negative error code. */ static int rate_value(int rate, u8 *value) { @@ -53,7 +53,7 @@ static int rate_value(int rate, u8 *value) * @param rate Sampling rate * @param bits_per_sample Bits per sample * - * @return 0 for success or negative error code. + * Return: 0 for success or negative error code. */ static int max98095_hw_params(struct maxim_priv *priv, enum en_max_audio_interface aif_id, @@ -121,7 +121,7 @@ static int max98095_hw_params(struct maxim_priv *priv, * @param priv max98095 information * @param freq Sampling frequency in Hz * - * @return 0 for success or negative error code. + * Return: 0 for success or negative error code. */ static int max98095_set_sysclk(struct maxim_priv *priv, unsigned int freq) { @@ -163,7 +163,7 @@ static int max98095_set_sysclk(struct maxim_priv *priv, unsigned int freq) * @param fmt i2S format - supports a subset of the options defined * in i2s.h. * - * @return 0 for success or negative error code. + * Return: 0 for success or negative error code. */ static int max98095_set_fmt(struct maxim_priv *priv, int fmt, enum en_max_audio_interface aif_id) @@ -255,7 +255,7 @@ static int max98095_set_fmt(struct maxim_priv *priv, int fmt, * resets the audio codec * * @param priv Private data for driver - * @return 0 for success or negative error code. + * Return: 0 for success or negative error code. */ static int max98095_reset(struct maxim_priv *priv) { @@ -296,7 +296,7 @@ static int max98095_reset(struct maxim_priv *priv) * Intialise max98095 codec device * * @param priv max98095 information - * @return 0 for success or negative error code. + * Return: 0 for success or negative error code. */ static int max98095_device_init(struct maxim_priv *priv) { diff --git a/drivers/sound/maxim_codec.c b/drivers/sound/maxim_codec.c index 31e67ee672..6553d95904 100644 --- a/drivers/sound/maxim_codec.c +++ b/drivers/sound/maxim_codec.c @@ -22,7 +22,7 @@ * @param reg reg number to be write * @param data data to be writen to the above registor * - * @return int value 1 for change, 0 for no change or negative error code. + * Return: int value 1 for change, 0 for no change or negative error code. */ int maxim_i2c_write(struct maxim_priv *priv, unsigned int reg, unsigned char data) @@ -39,7 +39,7 @@ int maxim_i2c_write(struct maxim_priv *priv, unsigned int reg, * @param reg reg number to be read * @param data address of read data to be stored * - * @return int value 0 for success, -1 in case of error. + * Return: int value 0 for success, -1 in case of error. */ unsigned int maxim_i2c_read(struct maxim_priv *priv, unsigned int reg, unsigned char *data) @@ -64,7 +64,7 @@ unsigned int maxim_i2c_read(struct maxim_priv *priv, unsigned int reg, * @param mask register mask * @param value new value * - * @return int value 0 for success, non-zero error code. + * Return: int value 0 for success, non-zero error code. */ int maxim_bic_or(struct maxim_priv *priv, unsigned int reg, unsigned char mask, unsigned char value) diff --git a/drivers/sound/maxim_codec.h b/drivers/sound/maxim_codec.h index a3128e0bb7..deaefd93eb 100644 --- a/drivers/sound/maxim_codec.h +++ b/drivers/sound/maxim_codec.h @@ -34,7 +34,7 @@ struct maxim_priv { * @param reg reg number to be write * @param data data to be writen to the above registor * - * @return int value 1 for change, 0 for no change or negative error code. + * Return: int value 1 for change, 0 for no change or negative error code. */ int maxim_i2c_write(struct maxim_priv *priv, unsigned int reg, unsigned char data); @@ -46,7 +46,7 @@ int maxim_i2c_write(struct maxim_priv *priv, unsigned int reg, * @param reg reg number to be read * @param data address of read data to be stored * - * @return int value 0 for success, -1 in case of error. + * Return: int value 0 for success, -1 in case of error. */ unsigned int maxim_i2c_read(struct maxim_priv *priv, unsigned int reg, unsigned char *data); @@ -59,7 +59,7 @@ unsigned int maxim_i2c_read(struct maxim_priv *priv, unsigned int reg, * @param mask register mask * @param value new value * - * @return int value 0 for success, non-zero error code. + * Return: int value 0 for success, non-zero error code. */ int maxim_bic_or(struct maxim_priv *priv, unsigned int reg, unsigned char mask, unsigned char value); diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c index d3d75c046e..dc5a2789ae 100644 --- a/drivers/sound/samsung-i2s.c +++ b/drivers/sound/samsung-i2s.c @@ -126,7 +126,7 @@ static void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush) * @param i2s_reg i2s register address * @param dir Clock direction * - * @return int value 0 for success, -1 in case of error + * Return: int value 0 for success, -1 in case of error */ static int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir) { @@ -148,7 +148,7 @@ static int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir) * @param fmt i2s clock properties * @param i2s_reg i2s register address * - * @return int value 0 for success, -1 in case of error + * Return: int value 0 for success, -1 in case of error */ static int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) { @@ -225,7 +225,7 @@ static int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) * @param blc samplewidth (size of sample in bits) * @param i2s_reg i2s register address * - * @return int value 0 for success, -1 in case of error + * Return: int value 0 for success, -1 in case of error */ static int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc) { diff --git a/drivers/sound/tegra_ahub.c b/drivers/sound/tegra_ahub.c index 8708fc44a9..495a29c513 100644 --- a/drivers/sound/tegra_ahub.c +++ b/drivers/sound/tegra_ahub.c @@ -70,7 +70,7 @@ static int tegra_ahub_apbif_is_full(struct udevice *dev) /** * tegra_ahub_wait_for_space() - Wait for space in the FIFO * - * @return 0 if OK, -ETIMEDOUT if no space was available in time + * Return: 0 if OK, -ETIMEDOUT if no space was available in time */ static int tegra_ahub_wait_for_space(struct udevice *dev) { diff --git a/drivers/sound/tegra_i2s_priv.h b/drivers/sound/tegra_i2s_priv.h index 7cd3fc808c..65a3623ad9 100644 --- a/drivers/sound/tegra_i2s_priv.h +++ b/drivers/sound/tegra_i2s_priv.h @@ -22,7 +22,7 @@ enum { * * @dev: I2S device * @value: Value to write to CIF_TX_CTRL register - * @return 0 + * Return: 0 */ int tegra_i2s_set_cif_tx_ctrl(struct udevice *dev, u32 value);

diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c index cb1e97d7a5..fd646479b3 100644 --- a/drivers/sound/wm8994.c +++ b/drivers/sound/wm8994.c @@ -71,7 +71,7 @@ static int bclk_divs[] = { * @param reg reg number to be write * @param data data to be writen to the above registor * - * @return int value 1 for change, 0 for no change or negative error code. + * Return: int value 1 for change, 0 for no change or negative error code. */ static int wm8994_i2c_write(struct wm8994_priv *priv, unsigned int reg, unsigned short data) @@ -92,7 +92,7 @@ static int wm8994_i2c_write(struct wm8994_priv *priv, unsigned int reg, * @param reg reg number to be read * @param data address of read data to be stored * - * @return int value 0 for success, -1 in case of error. + * Return: int value 0 for success, -1 in case of error. */ static unsigned int wm8994_i2c_read(struct wm8994_priv *priv, unsigned int reg, unsigned short *data) @@ -122,7 +122,7 @@ static unsigned int wm8994_i2c_read(struct wm8994_priv *priv, unsigned int reg, * @param mask register mask * @param value new value * - * @return int value 1 if change in the register value, + * Return: int value 1 if change in the register value, * 0 for no change or negative error code. */ static int wm8994_bic_or(struct wm8994_priv *priv, unsigned int reg, @@ -150,7 +150,7 @@ static int wm8994_bic_or(struct wm8994_priv *priv, unsigned int reg, * @param aif_id Interface ID * @param fmt i2S format * - * @return -1 for error and 0 Success. + * Return: -1 for error and 0 Success. */ static int wm8994_set_fmt(struct wm8994_priv *priv, int aif_id, uint fmt) { @@ -274,7 +274,7 @@ static int wm8994_set_fmt(struct wm8994_priv *priv, int aif_id, uint fmt) * @param bits_per_sample Bits per sample * @param Channels Channels in the given audio input * - * @return -1 for error and 0 Success. + * Return: -1 for error and 0 Success. */ static int wm8994_hw_params(struct wm8994_priv *priv, int aif_id, uint sampling_rate, uint bits_per_sample, @@ -417,7 +417,7 @@ static int wm8994_hw_params(struct wm8994_priv *priv, int aif_id, * @param priv wm8994 information pointer * @param aif Audio Interface ID * - * @return -1 for error and 0 Success. + * Return: -1 for error and 0 Success. */ static int configure_aif_clock(struct wm8994_priv *priv, int aif) { @@ -497,7 +497,7 @@ static int configure_aif_clock(struct wm8994_priv *priv, int aif) * @param clk_id Input Clock ID * @param freq Sampling frequency in Hz * - * @return -1 for error and 0 success. + * Return: -1 for error and 0 success. */ static int wm8994_set_sysclk(struct wm8994_priv *priv, int aif_id, int clk_id, unsigned int freq) diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index 42071bb70c..9142ffd238 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -504,7 +504,7 @@ static int wait_for_hwseq_xfer(struct fast_spi_regs *regs, uint offset) * @hsfsts_cycle: Cycle type (enum hsfsts_cycle_t) * @offset: Offset to access * @len: Number of bytes to transfer (can be 0) - * @return 0 if OK, -EIO on flash-cycle error (FCERR), -EPERM on access error + * Return: 0 if OK, -EIO on flash-cycle error (FCERR), -EPERM on access error * (AEL), -ETIMEDOUT on timeout */ static int exec_sync_hwseq_xfer(struct fast_spi_regs *regs, uint hsfsts_cycle, @@ -615,7 +615,7 @@ static int ich_spi_exec_op(struct spi_slave *slave, const struct spi_mem_op *op) * @pchp: Returns a pointer to the pch, or NULL if not found * @ich_versionp: Returns ICH version detected on success * @mmio_basep: Returns the address of the SPI registers on success - * @return 0 if OK, -EPROTOTYPE if the PCH could not be found, -EAGAIN if + * Return: 0 if OK, -EPROTOTYPE if the PCH could not be found, -EAGAIN if * the function cannot success without probing, possible another error if * pch_get_spi_base() fails */ diff --git a/drivers/spi/octeon_spi.c b/drivers/spi/octeon_spi.c index 6ac66d2f9a..fcabc112d2 100644 --- a/drivers/spi/octeon_spi.c +++ b/drivers/spi/octeon_spi.c @@ -137,7 +137,7 @@ static void octeon_spi_wait_ready(struct udevice *dev) * * @param dev SPI bus * - * @return 0 for success, -EINVAL if chip select is invalid + * Return: 0 for success, -EINVAL if chip select is invalid */ static int octeon_spi_claim_bus(struct udevice *dev) { @@ -168,7 +168,7 @@ static int octeon_spi_claim_bus(struct udevice *dev) * * @param dev SPI bus * - * @return 0 for success, -EINVAL if chip select is invalid + * Return: 0 for success, -EINVAL if chip select is invalid */ static int octeon_spi_release_bus(struct udevice *dev) { diff --git a/drivers/tpm/cr50_i2c.c b/drivers/tpm/cr50_i2c.c index 7a2b5a4faa..f8c3087894 100644 --- a/drivers/tpm/cr50_i2c.c +++ b/drivers/tpm/cr50_i2c.c @@ -467,7 +467,7 @@ out_err: * TPM finished reset processing. * * @dev: Cr50 device - * @return 0 if OK, -EPERM if locality could not be taken + * Return: 0 if OK, -EPERM if locality could not be taken */ static int process_reset(struct udevice *dev) { diff --git a/drivers/tpm/sandbox_common.h b/drivers/tpm/sandbox_common.h index e822a200fd..f423c50ec5 100644 --- a/drivers/tpm/sandbox_common.h +++ b/drivers/tpm/sandbox_common.h @@ -57,7 +57,7 @@ struct nvdata_state { * number used by the sandbox emulation. * * @index: Index to use (FIRMWARE_NV_INDEX, etc.) - * @return associated space (enum sandbox_nv_space) + * Return: associated space (enum sandbox_nv_space) */ int sb_tpm_index_to_seq(uint index);

diff --git a/drivers/tpm/tpm2_tis_spi.c b/drivers/tpm/tpm2_tis_spi.c index 58b6f33510..de9cf8f21e 100644 --- a/drivers/tpm/tpm2_tis_spi.c +++ b/drivers/tpm/tpm2_tis_spi.c @@ -60,7 +60,7 @@ struct tpm_tis_chip_data { * NOTE: TPM is big-endian for multi-byte values. Multi-byte * values have to be swapped. * - * @return -EIO on error, 0 on success. + * Return: -EIO on error, 0 on success. */ static int tpm_tis_spi_xfer(struct udevice *dev, u32 addr, const u8 *out, u8 *in, u16 len) diff --git a/drivers/tpm/tpm_atmel_twi.c b/drivers/tpm/tpm_atmel_twi.c index fa4fbec6bb..c059ea4cfe 100644 --- a/drivers/tpm/tpm_atmel_twi.c +++ b/drivers/tpm/tpm_atmel_twi.c @@ -48,7 +48,7 @@ static int tpm_atmel_twi_close(struct udevice *dev) * @dev: Device to check * @buf: Buffer to put the string * @size: Maximum size of buffer - * @return length of string, or -ENOSPC it no space + * Return: length of string, or -ENOSPC it no space */ static int tpm_atmel_twi_get_desc(struct udevice *dev, char *buf, int size) { diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index e9e6f2a551..5170044a3a 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -280,7 +280,7 @@ void ehci_set_controller_priv(int index, void *priv, * ehci_get_controller_priv() - Get controller private data * * @index Controller number to get - * @return controller pointer for this index + * Return: controller pointer for this index */ void *ehci_get_controller_priv(int index);

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 0d9da62bab..21cd03b662 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -32,7 +32,7 @@ * * @param addr pointer to memory region to be flushed * @param len the length of the cache line to be flushed - * @return none + * Return: none */ void xhci_flush_cache(uintptr_t addr, u32 len) { @@ -47,7 +47,7 @@ void xhci_flush_cache(uintptr_t addr, u32 len) * * @param addr pointer to memory region to be invalidates * @param len the length of the cache line to be invalidated - * @return none + * Return: none */ void xhci_inval_cache(uintptr_t addr, u32 len) { @@ -62,7 +62,7 @@ void xhci_inval_cache(uintptr_t addr, u32 len) * frees the "segment" pointer passed * * @param ptr pointer to "segement" to be freed - * @return none + * Return: none */ static void xhci_segment_free(struct xhci_segment *seg) { @@ -76,7 +76,7 @@ static void xhci_segment_free(struct xhci_segment *seg) * frees the "ring" pointer passed * * @param ptr pointer to "ring" to be freed - * @return none + * Return: none */ static void xhci_ring_free(struct xhci_ring *ring) { @@ -101,7 +101,7 @@ static void xhci_ring_free(struct xhci_ring *ring) * Free the scratchpad buffer array and scratchpad buffers * * @ctrl host controller data structure - * @return none + * Return: none */ static void xhci_scratchpad_free(struct xhci_ctrl *ctrl) { @@ -120,7 +120,7 @@ static void xhci_scratchpad_free(struct xhci_ctrl *ctrl) * frees the "xhci_container_ctx" pointer passed * * @param ptr pointer to "xhci_container_ctx" to be freed - * @return none + * Return: none */ static void xhci_free_container_ctx(struct xhci_container_ctx *ctx) { @@ -132,7 +132,7 @@ static void xhci_free_container_ctx(struct xhci_container_ctx *ctx) * frees the virtual devices for "xhci_ctrl" pointer passed * * @param ptr pointer to "xhci_ctrl" whose virtual devices are to be freed - * @return none + * Return: none */ static void xhci_free_virt_devices(struct xhci_ctrl *ctrl) { @@ -170,7 +170,7 @@ static void xhci_free_virt_devices(struct xhci_ctrl *ctrl) * frees all the memory allocated * * @param ptr pointer to "xhci_ctrl" to be cleaned up - * @return none + * Return: none */ void xhci_cleanup(struct xhci_ctrl *ctrl) { @@ -187,7 +187,7 @@ void xhci_cleanup(struct xhci_ctrl *ctrl) * Malloc the aligned memory * * @param size size of memory to be allocated - * @return allocates the memory and returns the aligned pointer + * Return: allocates the memory and returns the aligned pointer */ static void *xhci_malloc(unsigned int size) { @@ -212,7 +212,7 @@ static void *xhci_malloc(unsigned int size) * @param prev pointer to the previous segment * @param next pointer to the next segment * @param link_trbs flag to indicate whether to link the trbs or NOT - * @return none + * Return: none */ static void xhci_link_segments(struct xhci_ctrl *ctrl, struct xhci_segment *prev, struct xhci_segment *next, bool link_trbs) @@ -243,7 +243,7 @@ static void xhci_link_segments(struct xhci_ctrl *ctrl, struct xhci_segment *prev * Initialises the Ring's enqueue,dequeue,enq_seg pointers * * @param ring pointer to the RING to be intialised - * @return none + * Return: none */ static void xhci_initialize_ring_info(struct xhci_ring *ring) { @@ -271,7 +271,7 @@ static void xhci_initialize_ring_info(struct xhci_ring *ring) * "All components of all Command and Transfer TRBs shall be initialized to '0'" * * @param none - * @return pointer to the newly allocated SEGMENT + * Return: pointer to the newly allocated SEGMENT */ static struct xhci_segment *xhci_segment_alloc(void) { @@ -300,7 +300,7 @@ static struct xhci_segment *xhci_segment_alloc(void) * * @param num_segs number of segments in the ring * @param link_trbs flag to indicate whether to link the trbs or NOT - * @return pointer to the newly created RING + * Return: pointer to the newly created RING */ struct xhci_ring *xhci_ring_alloc(struct xhci_ctrl *ctrl, unsigned int num_segs, bool link_trbs) @@ -346,7 +346,7 @@ struct xhci_ring *xhci_ring_alloc(struct xhci_ctrl *ctrl, unsigned int num_segs, * Set up the scratchpad buffer array and scratchpad buffers * * @ctrl host controller data structure - * @return -ENOMEM if buffer allocation fails, 0 on success + * Return: -ENOMEM if buffer allocation fails, 0 on success */ static int xhci_scratchpad_alloc(struct xhci_ctrl *ctrl) { @@ -419,7 +419,7 @@ fail_sp: * * @param ctrl Host controller data structure * @param type type of XHCI Container Context - * @return NULL if failed else pointer to the context on success + * Return: NULL if failed else pointer to the context on success */ static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_ctrl *ctrl, int type) @@ -445,7 +445,7 @@ static struct xhci_container_ctx * Allocating virtual device * * @param udev pointer to USB deivce structure - * @return 0 on success else -1 on failure + * Return: 0 on success else -1 on failure */ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) { @@ -504,7 +504,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) * @param ctrl Host controller data structure * @param hccr pointer to HOST Controller Control Registers * @param hcor pointer to HOST Controller Operational Registers - * @return 0 if successful else -1 on failure + * Return: 0 if successful else -1 on failure */ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, struct xhci_hcor *hcor) @@ -611,7 +611,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, * Give the input control context for the passed container context * * @param ctx pointer to the context - * @return pointer to the Input control context data + * Return: pointer to the Input control context data */ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx) @@ -625,7 +625,7 @@ struct xhci_input_control_ctx * * @param ctrl Host controller data structure * @param ctx pointer to the context - * @return pointer to the slot control context data + * Return: pointer to the slot control context data */ struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl, struct xhci_container_ctx *ctx) @@ -643,7 +643,7 @@ struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_ctrl *ctrl, * @param ctrl Host controller data structure * @param ctx context container * @param ep_index index of the endpoint - * @return pointer to the End point context + * Return: pointer to the End point context */ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl, struct xhci_container_ctx *ctx, @@ -668,7 +668,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_ctrl *ctrl, * @param in_ctx contains the input context * @param out_ctx contains the input context * @param ep_index index of the end point - * @return none + * Return: none */ void xhci_endpoint_copy(struct xhci_ctrl *ctrl, struct xhci_container_ctx *in_ctx, @@ -697,7 +697,7 @@ void xhci_endpoint_copy(struct xhci_ctrl *ctrl, * @param ctrl Host controller data structure * @param in_ctx contains the inpout context * @param out_ctx contains the inpout context - * @return none + * Return: none */ void xhci_slot_copy(struct xhci_ctrl *ctrl, struct xhci_container_ctx *in_ctx, struct xhci_container_ctx *out_ctx) @@ -718,7 +718,7 @@ void xhci_slot_copy(struct xhci_ctrl *ctrl, struct xhci_container_ctx *in_ctx, * Setup an xHCI virtual device for a Set Address command * * @param udev pointer to the Device Data Structure - * @return returns negative value on failure else 0 on success + * Return: returns negative value on failure else 0 on success */ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, struct usb_device *udev, int hop_portnr) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 35bd5cd29e..0b3e7a2f55 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -33,7 +33,7 @@ * @param ring pointer to the ring * @param seg poniter to the segment to which TRB belongs * @param trb poniter to the ring trb - * @return 1 if this TRB a link TRB else 0 + * Return: 1 if this TRB a link TRB else 0 */ static int last_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring, struct xhci_segment *seg, union xhci_trb *trb) @@ -52,7 +52,7 @@ static int last_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring, * @param ring pointer to the ring * @param seg poniter to the segment to which TRB belongs * @param trb poniter to the ring trb - * @return 1 if this TRB is the last TRB on the last segment else 0 + * Return: 1 if this TRB is the last TRB on the last segment else 0 */ static bool last_trb_on_last_seg(struct xhci_ctrl *ctrl, struct xhci_ring *ring, @@ -86,7 +86,7 @@ static bool last_trb_on_last_seg(struct xhci_ctrl *ctrl, * are expected or NOT. * Will you enqueue more TRBs before calling * prepare_ring()? - * @return none + * Return: none */ static void inc_enq(struct xhci_ctrl *ctrl, struct xhci_ring *ring, bool more_trbs_coming) @@ -178,7 +178,7 @@ static void inc_deq(struct xhci_ctrl *ctrl, struct xhci_ring *ring) * @param ring pointer to the ring * @param more_trbs_coming flag to indicate whether more trbs * @param trb_fields pointer to trb field array containing TRB contents - * @return pointer to the enqueued trb + * Return: pointer to the enqueued trb */ static struct xhci_generic_trb *queue_trb(struct xhci_ctrl *ctrl, struct xhci_ring *ring, @@ -207,7 +207,7 @@ static struct xhci_generic_trb *queue_trb(struct xhci_ctrl *ctrl, * @param ctrl Host controller data structure * @param ep_ring pointer to the EP Transfer Ring * @param ep_state State of the End Point - * @return error code in case of invalid ep_state, 0 on success + * Return: error code in case of invalid ep_state, 0 on success */ static int prepare_ring(struct xhci_ctrl *ctrl, struct xhci_ring *ep_ring, u32 ep_state) @@ -269,7 +269,7 @@ static int prepare_ring(struct xhci_ctrl *ctrl, struct xhci_ring *ep_ring, * @param slot_id Slot ID to encode in the flags field (opt.) * @param ep_index Endpoint index to encode in the flags field (opt.) * @param cmd Command type to enqueue - * @return none + * Return: none */ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id, u32 ep_index, trb_type cmd) @@ -327,7 +327,7 @@ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id, * @param td_total_len total packet count * @param maxp max packet size of current pipe * @param more_trbs_coming indicate last trb in TD - * @return remainder + * Return: remainder */ static u32 xhci_td_remainder(struct xhci_ctrl *ctrl, int transferred, int trb_buff_len, unsigned int td_total_len, @@ -361,7 +361,7 @@ static u32 xhci_td_remainder(struct xhci_ctrl *ctrl, int transferred, * @param ep_index index of the endpoint * @param start_cycle cycle flag of the first TRB * @param start_trb pionter to the first TRB - * @return none + * Return: none */ static void giveback_first_trb(struct usb_device *udev, int ep_index, int start_cycle, @@ -395,7 +395,7 @@ static void giveback_first_trb(struct usb_device *udev, int ep_index, * the end of each event handler, and not touch the TRB again afterwards. * * @param ctrl Host controller data structure - * @return none + * Return: none */ void xhci_acknowledge_event(struct xhci_ctrl *ctrl) { @@ -411,7 +411,7 @@ void xhci_acknowledge_event(struct xhci_ctrl *ctrl) * Checks if there is a new event to handle on the event ring. * * @param ctrl Host controller data structure - * @return 0 if failure else 1 on success + * Return: 0 if failure else 1 on success */ static int event_ready(struct xhci_ctrl *ctrl) { @@ -437,7 +437,7 @@ static int event_ready(struct xhci_ctrl *ctrl) * * @param ctrl Host controller data structure * @param expected TRB type expected from Event TRB - * @return pointer to event trb + * Return: pointer to event trb */ union xhci_trb *xhci_wait_for_event(struct xhci_ctrl *ctrl, trb_type expected) { @@ -557,7 +557,7 @@ static void record_transfer_result(struct usb_device *udev, * @param pipe contains the DIR_IN or OUT , devnum * @param length length of the buffer * @param buffer buffer to be read/written based on the request - * @return returns 0 if successful else -1 on failure + * Return: returns 0 if successful else -1 on failure */ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe, int length, void *buffer) @@ -753,7 +753,7 @@ again: * @param req request type * @param length length of the buffer * @param buffer buffer to be read/written based on the request - * @return returns 0 if successful else error code on failure + * Return: returns 0 if successful else error code on failure */ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe, struct devrequest *req, int length, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 452dacc0af..ad73ba12e2 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -143,7 +143,7 @@ struct xhci_ctrl *xhci_get_ctrl(struct usb_device *udev) * @param mask mask for the value read * @param done value to be campared with result * @param usec time to wait till - * @return 0 if handshake is success else < 0 on failure + * Return: 0 if handshake is success else < 0 on failure */ static int handshake(uint32_t volatile *ptr, uint32_t mask, uint32_t done, int usec) @@ -164,7 +164,7 @@ handshake(uint32_t volatile *ptr, uint32_t mask, uint32_t done, int usec) * Set the run bit and wait for the host to be running. * * @param hcor pointer to host controller operation registers - * @return status of the Handshake + * Return: status of the Handshake */ static int xhci_start(struct xhci_hcor *hcor) { @@ -192,7 +192,7 @@ static int xhci_start(struct xhci_hcor *hcor) * Resets the XHCI Controller * * @param hcor pointer to host controller operation registers - * @return -EBUSY if XHCI Controller is not halted else status of handshake + * Return: -EBUSY if XHCI Controller is not halted else status of handshake */ static int xhci_reset(struct xhci_hcor *hcor) { @@ -244,7 +244,7 @@ static int xhci_reset(struct xhci_hcor *hcor) * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2) * * @param desc USB enpdoint Descriptor - * @return index of the Endpoint + * Return: index of the Endpoint */ static unsigned int xhci_get_ep_index(struct usb_endpoint_descriptor *desc) { @@ -447,7 +447,7 @@ static u32 xhci_get_max_esit_payload(struct usb_device *udev, * * @param udev pointer to the Device Data Structure * @param ctx_change flag to indicate the Context has changed or NOT - * @return 0 on success, -1 on failure + * Return: 0 on success, -1 on failure */ static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change) { @@ -487,7 +487,7 @@ static int xhci_configure_endpoints(struct usb_device *udev, bool ctx_change) * Configure the endpoint, programming the device contexts. * * @param udev pointer to the USB device structure - * @return returns the status of the xhci_configure_endpoints + * Return: returns the status of the xhci_configure_endpoints */ static int xhci_set_configuration(struct usb_device *udev) { @@ -630,7 +630,7 @@ static int xhci_set_configuration(struct usb_device *udev) * the device). * * @param udev pointer to the Device Data Structure - * @return 0 if successful else error code on failure + * Return: 0 if successful else error code on failure */ static int xhci_address_device(struct usb_device *udev, int root_portnr) { @@ -712,7 +712,7 @@ static int xhci_address_device(struct usb_device *udev, int root_portnr) * or allocating memory failed. * * @param udev pointer to the Device Data Structure - * @return Returns 0 on succes else return error code on failure + * Return: Returns 0 on succes else return error code on failure */ static int _xhci_alloc_device(struct usb_device *udev) { @@ -766,7 +766,7 @@ int usb_alloc_device(struct usb_device *udev) * we need to issue an evaluate context command and wait on it. * * @param udev pointer to the Device Data Structure - * @return returns the status of the xhci_configure_endpoints + * Return: returns the status of the xhci_configure_endpoints */ int xhci_check_maxpacket(struct usb_device *udev) { @@ -822,7 +822,7 @@ int xhci_check_maxpacket(struct usb_device *udev) * @param wIndex request index * @param addr address of posrt status register * @param port_status state of port status register - * @return none + * Return: none */ static void xhci_clear_port_change_bit(u16 wValue, u16 wIndex, volatile uint32_t *addr, u32 port_status) @@ -870,7 +870,7 @@ static void xhci_clear_port_change_bit(u16 wValue, * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect. * * @param state state of the Port Status and Control Regsiter - * @return a value that would result in the port being in the + * Return: a value that would result in the port being in the * same state, if the value was written to the port * status control register. */ @@ -886,7 +886,7 @@ static u32 xhci_port_state_to_neutral(u32 state) * @param udev pointer to the USB device structure * @param pipe contains the DIR_IN or OUT , devnum * @param buffer buffer to be read/written based on the request - * @return returns 0 if successful else -1 on failure + * Return: returns 0 if successful else -1 on failure */ static int xhci_submit_root(struct usb_device *udev, unsigned long pipe, void *buffer, struct devrequest *req) @@ -1116,7 +1116,7 @@ unknown: * @param buffer buffer to be read/written based on the request * @param length length of the buffer * @param interval interval of the interrupt - * @return 0 + * Return: 0 */ static int _xhci_submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer, int length, int interval, @@ -1143,7 +1143,7 @@ static int _xhci_submit_int_msg(struct usb_device *udev, unsigned long pipe, * @param pipe contains the DIR_IN or OUT , devnum * @param buffer buffer to be read/written based on the request * @param length length of the buffer - * @return returns 0 if successful else -1 on failure + * Return: returns 0 if successful else -1 on failure */ static int _xhci_submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer, int length) @@ -1165,7 +1165,7 @@ static int _xhci_submit_bulk_msg(struct usb_device *udev, unsigned long pipe, * @param length length of the buffer * @param setup Request type * @param root_portnr Root port number that this device is on - * @return returns 0 if successful else -1 on failure + * Return: returns 0 if successful else -1 on failure */ static int _xhci_submit_control_msg(struct usb_device *udev, unsigned long pipe, void *buffer, int length, @@ -1299,7 +1299,7 @@ int submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer, * and allocates the necessary data structures * * @param index index to the host controller data structure - * @return pointer to the intialised controller + * Return: pointer to the intialised controller */ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) { @@ -1338,7 +1338,7 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) * and cleans up all the related data structures * * @param index index to the host controller data structure - * @return none + * Return: none */ int usb_lowlevel_stop(int index) { diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c index 7cca92b970..05bd948785 100644 --- a/drivers/usb/musb-new/musb_gadget.c +++ b/drivers/usb/musb-new/musb_gadget.c @@ -1966,7 +1966,7 @@ void musb_gadget_cleanup(struct musb *musb) * -ENOMEM no memory to perform the operation * * @param driver the gadget driver - * @return <0 if error, 0 if everything is fine + * Return: <0 if error, 0 if everything is fine */ #ifndef __UBOOT__ static int musb_gadget_start(struct usb_gadget *g, diff --git a/drivers/usb/musb-new/musb_gadget_ep0.c b/drivers/usb/musb-new/musb_gadget_ep0.c index cbd92fca6b..7fdd24005e 100644 --- a/drivers/usb/musb-new/musb_gadget_ep0.c +++ b/drivers/usb/musb-new/musb_gadget_ep0.c @@ -147,7 +147,7 @@ static int service_tx_status_request( * that is supposed to be a standard control request. Assumes the fifo to * be at least 2 bytes long. * - * @return 0 if the request was NOT HANDLED, + * Return: 0 if the request was NOT HANDLED, * < 0 when error * > 0 when the request is processed * diff --git a/drivers/usb/musb-new/usb-compat.h b/drivers/usb/musb-new/usb-compat.h index 1c66c4fe36..df68c9220a 100644 --- a/drivers/usb/musb-new/usb-compat.h +++ b/drivers/usb/musb-new/usb-compat.h @@ -72,7 +72,7 @@ static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, * usb_dev_get_parent() - Get the parent of a USB device * * @udev: USB struct containing information about the device - * @return associated device for which udev == dev_get_parent_priv(dev) + * Return: associated device for which udev == dev_get_parent_priv(dev) */ struct usb_device *usb_dev_get_parent(struct usb_device *udev);

diff --git a/drivers/video/bridge/ps862x.c b/drivers/video/bridge/ps862x.c index c8e105857f..d1d22a6e23 100644 --- a/drivers/video/bridge/ps862x.c +++ b/drivers/video/bridge/ps862x.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; * @param addr_off offset from the i2c base address for ps8622 * @param reg_addr register address to write * @param value value to be written - * @return 0 on success, non-0 on failure + * Return: 0 on success, non-0 on failure */ static int ps8622_write(struct udevice *dev, unsigned addr_off, unsigned char reg_addr, unsigned char value) diff --git a/drivers/video/console_truetype.c b/drivers/video/console_truetype.c index de8b86bbac..c04b449a6d 100644 --- a/drivers/video/console_truetype.c +++ b/drivers/video/console_truetype.c @@ -368,7 +368,7 @@ static int console_truetype_putc_xy(struct udevice *dev, uint x, uint y, * @xend: X end position in pixels from the left * @yend: Y end position in pixels from the top * @clr: Value to write - * @return 0 if OK, -ENOSYS if the display depth is not supported + * Return: 0 if OK, -ENOSYS if the display depth is not supported */ static int console_truetype_erase(struct udevice *dev, int xstart, int ystart, int xend, int yend, int clr) @@ -429,7 +429,7 @@ static int console_truetype_erase(struct udevice *dev, int xstart, int ystart, * not been entered. * * @dev: Device to update - * @return 0 if OK, -ENOSYS if not supported + * Return: 0 if OK, -ENOSYS if not supported */ static int console_truetype_backspace(struct udevice *dev) { @@ -535,7 +535,7 @@ static struct font_info font_table[] = { * * This searched for the first available font. * - * @return pointer to the font, or NULL if none is found + * Return: pointer to the font, or NULL if none is found */ static u8 *console_truetype_find_font(void) { diff --git a/drivers/video/imx/ipu_common.c b/drivers/video/imx/ipu_common.c index 5908b23acc..54d1efc8f5 100644 --- a/drivers/video/imx/ipu_common.c +++ b/drivers/video/imx/ipu_common.c @@ -457,7 +457,7 @@ static void ipu_reset(void) * @param dev The device structure for the IPU passed in by the * driver framework. * - * @return Returns 0 on success or negative error code on error + * Return: Returns 0 on success or negative error code on error */ int ipu_probe(void) { @@ -574,7 +574,7 @@ void ipu_dump_registers(void) * @param params Input parameter containing union of channel * initialization parameters. * - * @return Returns 0 on success or negative error code on fail + * Return: Returns 0 on success or negative error code on fail */ int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params) { @@ -1006,7 +1006,7 @@ static void ipu_ch_param_init(int ch, * @param v private v offset for additional cropping, * zero if not used. * - * @return Returns 0 on success or negative error code on fail + * Return: Returns 0 on success or negative error code on fail */ int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, uint32_t pixel_fmt, @@ -1061,7 +1061,7 @@ int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, * * @param channel Input parameter for the logical channel ID. * - * @return This function returns 0 on success or negative error code on + * Return: This function returns 0 on success or negative error code on * fail. */ int32_t ipu_enable_channel(ipu_channel_t channel) @@ -1139,7 +1139,7 @@ void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type, * @param wait_for_stop Flag to set whether to wait for channel end * of frame or return immediately. * - * @return This function returns 0 on success or negative error code on + * Return: This function returns 0 on success or negative error code on * fail. */ int32_t ipu_disable_channel(ipu_channel_t channel) diff --git a/drivers/video/imx/ipu_disp.c b/drivers/video/imx/ipu_disp.c index 45069897fa..144322e4e2 100644 --- a/drivers/video/imx/ipu_disp.c +++ b/drivers/video/imx/ipu_disp.c @@ -822,7 +822,7 @@ static int ipu_pixfmt_to_map(uint32_t fmt) * * @param sig Bitfield of signal polarities for LCD interface. * - * @return This function returns 0 on success or negative error code on + * Return: This function returns 0 on success or negative error code on * fail. */

@@ -1171,7 +1171,7 @@ int32_t ipu_init_sync_panel(int disp, uint32_t pixel_clk, * * @param alpha Global alpha value. * - * @return Returns 0 on success or negative error code on fail + * Return: Returns 0 on success or negative error code on fail */ int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable, uint8_t alpha) @@ -1226,7 +1226,7 @@ int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable, * * @param colorKey 24-bit RGB color for transparent color key. * - * @return Returns 0 on success or negative error code on fail + * Return: Returns 0 on success or negative error code on fail */ int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable, uint32_t color_key) diff --git a/drivers/video/imx/mxc_ipuv3_fb.c b/drivers/video/imx/mxc_ipuv3_fb.c index 6cdbbafafb..98228f2ad6 100644 --- a/drivers/video/imx/mxc_ipuv3_fb.c +++ b/drivers/video/imx/mxc_ipuv3_fb.c @@ -428,7 +428,7 @@ static int mxcfb_unmap_video_memory(struct fb_info *fbi) * structures. This includes information such as bits per pixel, * color maps, screen width/height and RGBA offsets. * - * @return Framebuffer structure initialized with our information + * Return: Framebuffer structure initialized with our information */ static struct fb_info *mxcfb_init_fbinfo(void) { @@ -479,7 +479,7 @@ extern struct clk *g_ipu_clk; * this routine: Framebuffer initialization, Memory allocation and * mapping, Framebuffer registration, IPU initialization. * - * @return Appropriate error code to the kernel common code + * Return: Appropriate error code to the kernel common code */ static int mxcfb_probe(struct udevice *dev, u32 interface_pix_fmt, uint8_t disp, struct fb_videomode const *mode) diff --git a/drivers/video/meson/simplefb_common.h b/drivers/video/meson/simplefb_common.h index 9ea7b0486c..d0cc1b401f 100644 --- a/drivers/video/meson/simplefb_common.h +++ b/drivers/video/meson/simplefb_common.h @@ -14,7 +14,7 @@ * * @blob: device tree blob * @pipeline: display pipeline - * @return device node offset in blob, or negative values if failed + * Return: device node offset in blob, or negative values if failed */ int meson_simplefb_fdt_match(void *blob, const char *pipeline);

diff --git a/drivers/video/panel-uclass.c b/drivers/video/panel-uclass.c index bb2eaae2e9..1f7e20e0b5 100644 --- a/drivers/video/panel-uclass.c +++ b/drivers/video/panel-uclass.c @@ -26,7 +26,7 @@ int panel_enable_backlight(struct udevice *dev) * @dev: Panel device containing the backlight to update * @percent: Brightness value (0=off, 1=min brightness, * 100=full brightness) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int panel_set_backlight(struct udevice *dev, int percent) { diff --git a/drivers/video/rockchip/rk_hdmi.h b/drivers/video/rockchip/rk_hdmi.h index 859a0b9ff3..200dbaea74 100644 --- a/drivers/video/rockchip/rk_hdmi.h +++ b/drivers/video/rockchip/rk_hdmi.h @@ -33,7 +33,7 @@ struct rk_hdmi_priv { * @dev: device * @buf: output buffer for the EDID * @buf_size: number of bytes in the buffer - * @return number of bytes read if OK, -ve if something went wrong + * Return: number of bytes read if OK, -ve if something went wrong */ int rk_hdmi_read_edid(struct udevice *dev, u8 *buf, int buf_size);

@@ -55,7 +55,7 @@ void rk_hdmi_probe_regulators(struct udevice *dev, * rk_hdmi_of_to_plat() - common of_to_plat implementation * * @dev: device - * @return 0 if OK, -ve if something went wrong + * Return: 0 if OK, -ve if something went wrong */ int rk_hdmi_of_to_plat(struct udevice *dev);

@@ -68,7 +68,7 @@ int rk_hdmi_of_to_plat(struct udevice *dev); * 3. initialises the Designware HDMI PHY * * @dev: device - * @return 0 if OK, -ve if something went wrong + * Return: 0 if OK, -ve if something went wrong */ int rk_hdmi_probe(struct udevice *dev);

diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c index fe0574870f..bc98ab6875 100644 --- a/drivers/video/rockchip/rk_vop.c +++ b/drivers/video/rockchip/rk_vop.c @@ -238,7 +238,7 @@ static void rkvop_mode_set(struct udevice *dev, * @fbbase: Frame buffer address * @ep_node: Device tree node to process - this is the offset of an endpoint * node within the VOP's 'port' list. - * @return 0 if OK, -ve if something went wrong + * Return: 0 if OK, -ve if something went wrong */ static int rk_display_init(struct udevice *dev, ulong fbbase, ofnode ep_node) { diff --git a/drivers/video/rockchip/rk_vop.h b/drivers/video/rockchip/rk_vop.h index 53a79c04b5..0528fb23f5 100644 --- a/drivers/video/rockchip/rk_vop.h +++ b/drivers/video/rockchip/rk_vop.h @@ -32,7 +32,7 @@ struct rkvop_driverdata { * successfully initialised). * * @dev: device - * @return 0 if OK, -ve if something went wrong + * Return: 0 if OK, -ve if something went wrong */ int rk_vop_probe(struct udevice *dev);

@@ -44,7 +44,7 @@ int rk_vop_probe(struct udevice *dev); * (32 BPP) x VIDEO_ROCKCHIP_MAX_XRES x VIDEO_ROCKCHIP_MAX_YRES * * @dev: device - * @return 0 (always OK) + * Return: 0 (always OK) */ int rk_vop_bind(struct udevice *dev);

diff --git a/drivers/video/sunxi/simplefb_common.h b/drivers/video/sunxi/simplefb_common.h index f4c5e745c6..10292a095a 100644 --- a/drivers/video/sunxi/simplefb_common.h +++ b/drivers/video/sunxi/simplefb_common.h @@ -14,7 +14,7 @@ * * @blob: device tree blob * @pipeline: display pipeline - * @return device node offset in blob, or negative values if failed + * Return: device node offset in blob, or negative values if failed */ int sunxi_simplefb_fdt_match(void *blob, const char *pipeline);

diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c index d60132eb77..3f9fcd0403 100644 --- a/drivers/video/tegra.c +++ b/drivers/video/tegra.c @@ -262,7 +262,7 @@ static int setup_window(struct disp_ctl_win *win, * @param blob Device tree blob * @param priv Driver's private data * @param default_lcd_base Default address of LCD frame buffer - * @return 0 if ok, -1 on error (unsupported bits per pixel) + * Return: 0 if ok, -1 on error (unsupported bits per pixel) */ static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv, void *default_lcd_base) diff --git a/drivers/video/ti/am335x-fb.c b/drivers/video/ti/am335x-fb.c index 8b41dac66d..680ea47998 100644 --- a/drivers/video/ti/am335x-fb.c +++ b/drivers/video/ti/am335x-fb.c @@ -139,7 +139,7 @@ struct dpll_data { * * @dpll_data: struct dpll_data pointer for the DPLL * @rate: New DPLL clock rate - * @return rounded rate and the computed m, n and div values in the dpll_data + * Return: rounded rate and the computed m, n and div values in the dpll_data * structure, or -ve error code. */ static ulong am335x_dpll_round_rate(struct dpll_data *dd, ulong rate) @@ -189,7 +189,7 @@ static ulong am335x_dpll_round_rate(struct dpll_data *dd, ulong rate) * * @am335x_lcdhw: Base address of the LCD controller registers. * @rate: New clock rate in Hz. - * @return new rate, or -ve error code. + * Return: new rate, or -ve error code. */ static ulong am335x_fb_set_pixel_clk_rate(struct am335x_lcdhw *regs, ulong rate) { diff --git a/drivers/video/video_bmp.c b/drivers/video/video_bmp.c index e8600b2def..c8c3fd3549 100644 --- a/drivers/video/video_bmp.c +++ b/drivers/video/video_bmp.c @@ -21,7 +21,7 @@ /** * get_bmp_col_16bpp() - Convert a colour-table entry into a 16bpp pixel value * - * @return value to write to the 16bpp frame buffer for this palette entry + * Return: value to write to the 16bpp frame buffer for this palette entry */ static uint get_bmp_col_16bpp(struct bmp_color_table_entry cte) { diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c index ed7373eac8..69ef736d4c 100644 --- a/drivers/video/videomodes.c +++ b/drivers/video/videomodes.c @@ -384,7 +384,7 @@ int video_get_option_int(const char *options, const char *name, int def) * @param t The EDID detailed timing to be converted * @param mode Returns the converted timing * - * @return 0 on success, or a negative errno on error + * Return: 0 on success, or a negative errno on error */ int video_edid_dtd_to_ctfb_res_modes(struct edid_detailed_timing *t, struct ctfb_res_modes *mode) diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c index dfbbf8a625..fd8a1f3fec 100644 --- a/drivers/virtio/virtio_pci_modern.c +++ b/drivers/virtio/virtio_pci_modern.c @@ -380,7 +380,7 @@ static int virtio_pci_notify(struct udevice *udev, struct virtqueue *vq) * @udev: the transport device * @cfg_type: the VIRTIO_PCI_CAP_* value we seek * - * @return offset of the configuration structure + * Return: offset of the configuration structure */ static int virtio_pci_find_capability(struct udevice *udev, u8 cfg_type) { @@ -413,7 +413,7 @@ static int virtio_pci_find_capability(struct udevice *udev, u8 cfg_type) * @udev: the transport device * @off: offset of the configuration structure * - * @return base address of the capability + * Return: base address of the capability */ static void __iomem *virtio_pci_map_capability(struct udevice *udev, int off) { diff --git a/env/common.c b/env/common.c index ee957c0a8c..f9226e0690 100644 --- a/env/common.c +++ b/env/common.c @@ -47,7 +47,7 @@ struct hsearch_data env_htab = { * * @param varname Environment variable to set * @param value Value to set it to - * @return 0 if ok, 1 on error + * Return: 0 if ok, 1 on error */ int env_set_ulong(const char *varname, ulong value) { @@ -62,7 +62,7 @@ int env_set_ulong(const char *varname, ulong value) * * @param varname Environment variable to set * @param value Value to set it to - * @return 0 if ok, 1 on error + * Return: 0 if ok, 1 on error */ int env_set_hex(const char *varname, ulong value) { @@ -208,7 +208,7 @@ int env_get_f(const char *name, char *buf, unsigned len) * @param base Number base to use (normally 10, or 16 for hex) * @param default_val Default value to return if the variable is not * found - * @return the decoded value, or default_val if not found + * Return: the decoded value, or default_val if not found */ ulong env_get_ulong(const char *name, int base, ulong default_val) { diff --git a/fs/cbfs/cbfs.c b/fs/cbfs/cbfs.c index 3e905c74e5..714f4baafc 100644 --- a/fs/cbfs/cbfs.c +++ b/fs/cbfs/cbfs.c @@ -85,7 +85,7 @@ static void swap_file_header(struct cbfs_fileheader *dest, * @node: Node to fill * @start: Pointer to the start of the CBFS file in memory * @header: Pointer to the header information (in our enddianess) - * @return 0 if OK, -EBADF if the header is too small + * Return: 0 if OK, -EBADF if the header is too small */ static int fill_node(struct cbfs_cachenode *node, void *start, struct cbfs_fileheader *header) @@ -142,7 +142,7 @@ static int fill_node(struct cbfs_cachenode *node, void *start, * @param used A pointer to the count of of bytes scanned through, * including the file if one is found. * - * @return 0 if a file is found, -ENOENT if one isn't, -EBADF if a bad header + * Return: 0 if a file is found, -ENOENT if one isn't, -EBADF if a bad header * is found. */ static int file_cbfs_next_file(struct cbfs_priv *priv, void *start, int size, @@ -234,7 +234,7 @@ static int file_cbfs_fill_cache(struct cbfs_priv *priv, int size, int align) * * @priv: Private data, which is inited by this function * @addr: Address of CBFS header in memory-mapped SPI flash - * @return 0 if OK, -ENXIO if the header is bad + * Return: 0 if OK, -ENXIO if the header is bad */ static int load_header(struct cbfs_priv *priv, ulong addr) { @@ -259,7 +259,7 @@ static int load_header(struct cbfs_priv *priv, ulong addr) * * @priv: Private data, which is inited by this function * @end_of_rom: Address of the last byte of the ROM (typically 0xffffffff) - * @return 0 if OK, -ENXIO if the header is bad + * Return: 0 if OK, -ENXIO if the header is bad */ static int file_cbfs_load_header(struct cbfs_priv *priv, ulong end_of_rom) { @@ -279,7 +279,7 @@ static int file_cbfs_load_header(struct cbfs_priv *priv, ulong end_of_rom) * * @priv: Private data, which is inited by this function * @base: Address of the first byte of the ROM (e.g. 0xff000000) - * @return 0 if OK, -ENXIO if the header is bad + * Return: 0 if OK, -ENXIO if the header is bad */ static int cbfs_load_header_ptr(struct cbfs_priv *priv, ulong base) { diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 65f77c4f75..df9ea2c028 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -735,7 +735,7 @@ static int fat_itr_isdir(fat_itr *itr); * * @itr: iterator to initialize * @fsdata: filesystem data for the partition - * @return 0 on success, else -errno + * Return: 0 on success, else -errno */ static int fat_itr_root(fat_itr *itr, fsdata *fsdata) { @@ -954,7 +954,7 @@ static dir_entry *extract_vfat_name(fat_itr *itr) * Must be called once on a new iterator before the cursor is valid. * * @itr: the iterator to iterate - * @return boolean, 1 if success or 0 if no more entries in the + * Return: boolean, 1 if success or 0 if no more entries in the * current directory */ static int fat_itr_next(fat_itr *itr) @@ -1024,7 +1024,7 @@ static int fat_itr_next(fat_itr *itr) * fat_itr_isdir() - is current cursor position pointing to a directory * * @itr: the iterator - * @return true if cursor is at a directory + * Return: true if cursor is at a directory */ static int fat_itr_isdir(fat_itr *itr) { @@ -1052,7 +1052,7 @@ static int fat_itr_isdir(fat_itr *itr) * @itr: iterator initialized to root * @path: the requested path * @type: bitmask of allowable file types - * @return 0 on success or -errno + * Return: 0 on success or -errno */ static int fat_itr_resolve(fat_itr *itr, const char *path, unsigned type) { diff --git a/include/abuf.h b/include/abuf.h index d230f72806..9badda64e4 100644 --- a/include/abuf.h +++ b/include/abuf.h @@ -86,7 +86,7 @@ void abuf_map_sysmem(struct abuf *abuf, ulong addr, size_t size); * if less than the current size, the abuf is contracted and the data at * the end is lost. If @new_size is 0, this sets the alloced member to * false - * @return true if OK, false if out of memory + * Return: true if OK, false if out of memory */ bool abuf_realloc(struct abuf *abuf, size_t new_size);

@@ -109,7 +109,7 @@ bool abuf_realloc(struct abuf *abuf, size_t new_size); * * @abuf: abuf to uninit * @sizep: if non-NULL, returns the size of the returned data - * @return data contents, allocated with malloc(), or NULL if the data could not + * Return: data contents, allocated with malloc(), or NULL if the data could not * be allocated, or the data size is 0 */ void *abuf_uninit_move(struct abuf *abuf, size_t *sizep); diff --git a/include/acpi/acpi_device.h b/include/acpi/acpi_device.h index 2c8846250b..16bcf3c6f8 100644 --- a/include/acpi/acpi_device.h +++ b/include/acpi/acpi_device.h @@ -322,7 +322,7 @@ struct acpi_i2c_priv { * @dev: Device to check * @buf: Buffer to place the path in (should be ACPI_PATH_MAX long) * @maxlen: Size of buffer (typically ACPI_PATH_MAX) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_device_path(const struct udevice *dev, char *buf, int maxlen);

@@ -335,7 +335,7 @@ int acpi_device_path(const struct udevice *dev, char *buf, int maxlen); * @dev: Device to check * @buf: Buffer to place the path in (should be ACPI_PATH_MAX long) * @maxlen: Size of buffer (typically ACPI_PATH_MAX) - * @return 0 if OK, -EINVAL if the device has no parent, other -ve on other + * Return: 0 if OK, -EINVAL if the device has no parent, other -ve on other * error */ int acpi_device_scope(const struct udevice *dev, char *scope, int maxlen); @@ -347,7 +347,7 @@ int acpi_device_scope(const struct udevice *dev, char *scope, int maxlen); * inactive or hidden devices. * * @dev: Device to check - * @return device status, as ACPI_DSTATUS_... + * Return: device status, as ACPI_DSTATUS_... */ enum acpi_dev_status acpi_device_status(const struct udevice *dev);

@@ -359,7 +359,7 @@ enum acpi_dev_status acpi_device_status(const struct udevice *dev); * * @ctx: ACPI context pointer * @req_irq: Interrupt to output - * @return IRQ pin number if OK, -ve on error + * Return: IRQ pin number if OK, -ve on error */ int acpi_device_write_interrupt_irq(struct acpi_ctx *ctx, const struct irq *req_irq); @@ -368,7 +368,7 @@ int acpi_device_write_interrupt_irq(struct acpi_ctx *ctx, * acpi_device_write_gpio() - Write GpioIo() or GpioInt() descriptor * * @gpio: GPIO information to write - * @return GPIO pin number of first GPIO if OK, -ve on error + * Return: GPIO pin number of first GPIO if OK, -ve on error */ int acpi_device_write_gpio(struct acpi_ctx *ctx, const struct acpi_gpio *gpio);

@@ -380,7 +380,7 @@ int acpi_device_write_gpio(struct acpi_ctx *ctx, const struct acpi_gpio *gpio); * * @ctx: ACPI context pointer * @desc: GPIO to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_device_write_gpio_desc(struct acpi_ctx *ctx, const struct gpio_desc *desc); @@ -394,7 +394,7 @@ int acpi_device_write_gpio_desc(struct acpi_ctx *ctx, * If an interrupt is found, an ACPI interrupt descriptor is written to the ACPI * output. If not, but if a GPIO is found, a GPIO descriptor is written. * - * @return irq or GPIO pin number if OK, -ve if neither an interrupt nor a GPIO + * Return: irq or GPIO pin number if OK, -ve if neither an interrupt nor a GPIO * could be found, or some other error occurred */ int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx, @@ -419,7 +419,7 @@ int acpi_device_write_dsm_i2c_hid(struct acpi_ctx *ctx, * * @ctx: ACPI context pointer * @dev: I2C device to write - * @return I2C address of device if OK, -ve on error + * Return: I2C address of device if OK, -ve on error */ int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev);

@@ -431,7 +431,7 @@ int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev); * * @ctx: ACPI context pointer * @dev: SPI device to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev);

@@ -466,7 +466,7 @@ int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev); * @stop_off_delay_ms: Delay to be inserted after enabling stop. * (_OFF method delay) * - * @return 0 if OK, -ve if at least one GPIO is not provided + * Return: 0 if OK, -ve if at least one GPIO is not provided */ int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val, const char *dw0_read, const char *dw0_write, @@ -490,7 +490,7 @@ int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val, * * @dev: Device to check * @out_name: Place to put the name (must hold ACPI_NAME_MAX bytes) - * @return 0 if a name was found, -ENOENT if not found, -ENXIO if the device + * Return: 0 if a name was found, -ENOENT if not found, -ENXIO if the device * sequence number could not be determined */ int acpi_device_infer_name(const struct udevice *dev, char *out_name); diff --git a/include/acpi/acpi_dp.h b/include/acpi/acpi_dp.h index 5e539b1d21..be02cc3495 100644 --- a/include/acpi/acpi_dp.h +++ b/include/acpi/acpi_dp.h @@ -124,7 +124,7 @@ struct acpi_dp { * acpi_dp_new_table() - Start a new Device Property table * * @ref: ACPI reference (e.g. "_DSD") - * @return pointer to table, or NULL if out of memory + * Return: pointer to table, or NULL if out of memory */ struct acpi_dp *acpi_dp_new_table(const char *ref);

@@ -136,7 +136,7 @@ struct acpi_dp *acpi_dp_new_table(const char *ref); * @dp: Table to add this property to * @name: Name of property, or NULL for none * @value: Integer value - * @return pointer to new node, or NULL if out of memory + * Return: pointer to new node, or NULL if out of memory */ struct acpi_dp *acpi_dp_add_integer(struct acpi_dp *dp, const char *name, u64 value); @@ -149,7 +149,7 @@ struct acpi_dp *acpi_dp_add_integer(struct acpi_dp *dp, const char *name, * @dp: Table to add this property to * @name: Name of property, or NULL for none * @string: String value - * @return pointer to new node, or NULL if out of memory + * Return: pointer to new node, or NULL if out of memory */ struct acpi_dp *acpi_dp_add_string(struct acpi_dp *dp, const char *name, const char *string); @@ -162,7 +162,7 @@ struct acpi_dp *acpi_dp_add_string(struct acpi_dp *dp, const char *name, * @dp: Table to add this property to * @name: Name of property, or NULL for none * @reference: Reference value - * @return pointer to new node, or NULL if out of memory + * Return: pointer to new node, or NULL if out of memory */ struct acpi_dp *acpi_dp_add_reference(struct acpi_dp *dp, const char *name, const char *reference); @@ -175,7 +175,7 @@ struct acpi_dp *acpi_dp_add_reference(struct acpi_dp *dp, const char *name, * * @dp: Table to add this property to * @name: Name of property, or NULL for none - * @return pointer to new node, or NULL if out of memory + * Return: pointer to new node, or NULL if out of memory */ struct acpi_dp *acpi_dp_add_array(struct acpi_dp *dp, struct acpi_dp *array);

@@ -187,7 +187,7 @@ struct acpi_dp *acpi_dp_add_array(struct acpi_dp *dp, struct acpi_dp *array); * * @dp: Table to add this property to * @name: Name of property, or NULL for none - * @return pointer to new array node, or NULL if out of memory + * Return: pointer to new array node, or NULL if out of memory */ struct acpi_dp *acpi_dp_add_integer_array(struct acpi_dp *dp, const char *name, u64 *array, int len); @@ -200,7 +200,7 @@ struct acpi_dp *acpi_dp_add_integer_array(struct acpi_dp *dp, const char *name, * @dp: Table to add this child to * @name: Name of child, or NULL for none * @child: Child node to add - * @return pointer to new child node, or NULL if out of memory + * Return: pointer to new child node, or NULL if out of memory */ struct acpi_dp *acpi_dp_add_child(struct acpi_dp *dp, const char *name, struct acpi_dp *child); @@ -217,7 +217,7 @@ struct acpi_dp *acpi_dp_add_child(struct acpi_dp *dp, const char *name, * @index: Index of the GPIO resource in _CRS starting from zero * @pin: Pin in the GPIO resource, typically zero * @polarity: GPIO polarity. Note that ACPI_IRQ_ACTIVE_BOTH is not supported - * @return pointer to new node, or NULL if out of memory + * Return: pointer to new node, or NULL if out of memory */ struct acpi_dp *acpi_dp_add_gpio(struct acpi_dp *dp, const char *name, const char *ref, int index, int pin, @@ -230,7 +230,7 @@ struct acpi_dp *acpi_dp_add_gpio(struct acpi_dp *dp, const char *name, * * @ctx: ACPI context * @table: Table to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_dp_write(struct acpi_ctx *ctx, struct acpi_dp *table);

@@ -242,7 +242,7 @@ int acpi_dp_write(struct acpi_ctx *ctx, struct acpi_dp *table); * @node: Node to copy from * @dp: DP to copy to * @prop: Property name to copy - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_dp_ofnode_copy_int(ofnode node, struct acpi_dp *dp, const char *prop);

@@ -254,7 +254,7 @@ int acpi_dp_ofnode_copy_int(ofnode node, struct acpi_dp *dp, const char *prop); * @node: Node to copy from * @dp: DP to copy to * @prop: Property name to copy - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_dp_ofnode_copy_str(ofnode node, struct acpi_dp *dp, const char *prop);

@@ -266,7 +266,7 @@ int acpi_dp_ofnode_copy_str(ofnode node, struct acpi_dp *dp, const char *prop); * @dev: Device to copy from * @dp: DP to copy to * @prop: Property name to copy - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_dp_dev_copy_int(const struct udevice *dev, struct acpi_dp *dp, const char *prop); @@ -279,7 +279,7 @@ int acpi_dp_dev_copy_int(const struct udevice *dev, struct acpi_dp *dp, * @dev: Device to copy from * @dp: DP to copy to * @prop: Property name to copy - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_dp_dev_copy_str(const struct udevice *dev, struct acpi_dp *dp, const char *prop); diff --git a/include/acpi/acpi_s3.h b/include/acpi/acpi_s3.h index 847139baa0..d3f271f948 100644 --- a/include/acpi/acpi_s3.h +++ b/include/acpi/acpi_s3.h @@ -93,7 +93,7 @@ static inline enum acpi_sleep_state acpi_sleep_from_pm1(u32 pm1_cnt) * This returns chipset previous sleep state from ACPI registers. * Platform codes must supply this routine in order to support ACPI S3. * - * @return ACPI_S0/S1/S2/S3/S4/S5. + * Return: ACPI_S0/S1/S2/S3/S4/S5. */ enum acpi_sleep_state chipset_prev_sleep_state(void);

diff --git a/include/acpi/acpi_table.h b/include/acpi/acpi_table.h index a28eb71f4d..dbfea3be70 100644 --- a/include/acpi/acpi_table.h +++ b/include/acpi/acpi_table.h @@ -595,7 +595,7 @@ enum acpi_tables { * This keeps the version-number information in one place * * @table: ACPI table to check - * @return version number that U-Boot generates + * Return: version number that U-Boot generates */ int acpi_get_table_revision(enum acpi_tables table);

@@ -604,7 +604,7 @@ int acpi_get_table_revision(enum acpi_tables table); * * @dmar: Place to put the table * @flags: DMAR flags to use - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_create_dmar(struct acpi_dmar *dmar, enum dmar_flags flags);

@@ -674,7 +674,7 @@ void acpi_inc_align(struct acpi_ctx *ctx, uint amount); * * @ctx: ACPI context * @table: Table to add - * @return 0 if OK, -E2BIG if too many tables + * Return: 0 if OK, -E2BIG if too many tables */ int acpi_add_table(struct acpi_ctx *ctx, void *table);

diff --git a/include/acpi/acpigen.h b/include/acpi/acpigen.h index 976f4dbb9a..2c269ed662 100644 --- a/include/acpi/acpigen.h +++ b/include/acpi/acpigen.h @@ -140,7 +140,7 @@ struct acpi_tstate { * acpigen_get_current() - Get the current ACPI code output pointer * * @ctx: ACPI context pointer - * @return output pointer + * Return: output pointer */ u8 *acpigen_get_current(struct acpi_ctx *ctx);

@@ -428,7 +428,7 @@ void acpigen_write_scope(struct acpi_ctx *ctx, const char *scope); * * @ctx: ACPI context pointer * @uuid: UUID to write in the form aabbccdd-eeff-gghh-iijj-kkllmmnnoopp - * @return 0 if OK, -EINVAL if the format is incorrect + * Return: 0 if OK, -EINVAL if the format is incorrect */ int acpigen_write_uuid(struct acpi_ctx *ctx, const char *uuid);

diff --git a/include/ahci.h b/include/ahci.h index d5453042d1..d7f951c388 100644 --- a/include/ahci.h +++ b/include/ahci.h @@ -202,7 +202,7 @@ struct ahci_ops { * sata_reset() - reset the controller * * @dev: Controller to reset - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int sata_reset(struct udevice *dev);

@@ -211,7 +211,7 @@ int sata_reset(struct udevice *dev); * * @dev: Controller to reset * @port: Port number to check (0 for first) - * @return 0 if detected, -ENXIO if nothin on port, other -ve on error + * Return: 0 if detected, -ENXIO if nothin on port, other -ve on error */ int sata_dm_port_status(struct udevice *dev, int port);

@@ -219,7 +219,7 @@ int sata_dm_port_status(struct udevice *dev, int port); * sata_scan() - scan SATA ports * * @dev: Controller to scan - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int sata_scan(struct udevice *dev);

@@ -254,7 +254,7 @@ int ahci_init_dm(struct udevice *dev, void __iomem *base); * * @ahci_dev: AHCI parent device * @devp: Returns new SCSI bus device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int ahci_bind_scsi(struct udevice *ahci_dev, struct udevice **devp);

@@ -266,7 +266,7 @@ int ahci_bind_scsi(struct udevice *ahci_dev, struct udevice **devp); * * @ahci_dev: AHCI parent device * @base: Base address of AHCI port - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int ahci_probe_scsi(struct udevice *ahci_dev, ulong base);

@@ -277,7 +277,7 @@ int ahci_probe_scsi(struct udevice *ahci_dev, ulong base); * devices it finds. * * @ahci_dev: AHCI parent device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int ahci_probe_scsi_pci(struct udevice *ahci_dev);

diff --git a/include/android_ab.h b/include/android_ab.h index 0941eb6b9c..3eb61125c6 100644 --- a/include/android_ab.h +++ b/include/android_ab.h @@ -28,7 +28,7 @@ struct disk_partition; * * @param[in] dev_desc Place to store the device description pointer * @param[in] part_info Place to store the partition information - * @return The slot number (>= 0) on success, or a negative on error + * Return: The slot number (>= 0) on success, or a negative on error */ int ab_select_slot(struct blk_desc *dev_desc, struct disk_partition *part_info);

diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index fa9b80722e..adc19e9765 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -50,7 +50,7 @@ struct ofnode_phandle_args; * * @param gpio GPIO number * @param label User label for this GPIO - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int gpio_request(unsigned gpio, const char *label);

@@ -59,7 +59,7 @@ int gpio_request(unsigned gpio, const char *label); * Stop using the GPIO. This function should not alter pin configuration. * * @param gpio GPIO number - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int gpio_free(unsigned gpio);

@@ -68,7 +68,7 @@ int gpio_free(unsigned gpio); * Make a GPIO an input. * * @param gpio GPIO number - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int gpio_direction_input(unsigned gpio);

@@ -78,7 +78,7 @@ int gpio_direction_input(unsigned gpio); * * @param gpio GPIO number * @param value GPIO value (0 for low or 1 for high) - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int gpio_direction_output(unsigned gpio, int value);

@@ -88,7 +88,7 @@ int gpio_direction_output(unsigned gpio, int value); * or an output. * * @param gpio GPIO number - * @return 0 if low, 1 if high, -1 on error + * Return: 0 if low, 1 if high, -1 on error */ int gpio_get_value(unsigned gpio);

@@ -99,7 +99,7 @@ int gpio_get_value(unsigned gpio); * * @param gpio GPIO number * @param value GPIO value (0 for low or 1 for high) - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int gpio_set_value(unsigned gpio, int value);

@@ -146,7 +146,7 @@ struct gpio_desc { * * @desc: GPIO description containing device, offset and flags, * previously returned by gpio_request_by_name() - * @return true if valid, false if not + * Return: true if valid, false if not */ static inline bool dm_gpio_is_valid(const struct gpio_desc *desc) { @@ -184,7 +184,7 @@ int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize); * @offset: Offset of device GPIO to check * @namep: If non-NULL, this is set to the name given when the GPIO * was requested, or -1 if it has not been requested - * @return -ENODATA if the driver returned an unknown function, + * Return: -ENODATA if the driver returned an unknown function, * -ENODEV if the device is not active, -EINVAL if the offset is invalid. * GPIOF_UNUSED if the GPIO has not been requested. Otherwise returns the * function from enum gpio_func_t. @@ -203,7 +203,7 @@ int gpio_get_function(struct udevice *dev, int offset, const char **namep); * @offset: Offset of device GPIO to check * @namep: If non-NULL, this is set to the name given when the GPIO * was requested, or -1 if it has not been requested - * @return -ENODATA if the driver returned an unknown function, + * Return: -ENODATA if the driver returned an unknown function, * -ENODEV if the device is not active, -EINVAL if the offset is invalid. * Otherwise returns the function from enum gpio_func_t. */ @@ -434,7 +434,7 @@ struct gpio_dev_priv { * * @dev: Device to look up * @offset_count: Returns number of GPIOs within this bank - * @return bank name of this device + * Return: bank name of this device */ const char *gpio_get_bank_info(struct udevice *dev, int *offset_count);

@@ -447,7 +447,7 @@ const char *gpio_get_bank_info(struct udevice *dev, int *offset_count); * * @name: Name to look up * @desc: Returns description, on success - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_gpio_lookup_name(const char *name, struct gpio_desc *desc);

@@ -489,7 +489,7 @@ int gpio_lookup_name(const char *name, struct udevice **devp, * etc. then returns the resulting integer. * * @gpio_list: List of GPIOs to collect - * @return resulting integer value, or -ve on error + * Return: resulting integer value, or -ve on error */ int gpio_get_values_as_int(const int *gpio_list);

@@ -501,7 +501,7 @@ int gpio_get_values_as_int(const int *gpio_list); * * @desc_list: List of GPIOs to collect * @count: Number of GPIOs - * @return resulting integer value, or -ve on error + * Return: resulting integer value, or -ve on error */ int dm_gpio_get_values_as_int(const struct gpio_desc *desc_list, int count);

@@ -525,7 +525,7 @@ int dm_gpio_get_values_as_int(const struct gpio_desc *desc_list, int count); * * @desc_list: List of GPIOs to collect * @count: Number of GPIOs - * @return resulting integer value, or -ve on error + * Return: resulting integer value, or -ve on error */ int dm_gpio_get_values_as_int_base3(struct gpio_desc *desc_list, int count); @@ -535,7 +535,7 @@ int dm_gpio_get_values_as_int_base3(struct gpio_desc *desc_list, * * @gpio_num_array: array of gpios to claim, terminated by -1 * @fmt: format string for GPIO names, e.g. "board_id%d" - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int gpio_claim_vector(const int *gpio_num_array, const char *fmt);

@@ -572,7 +572,7 @@ int gpio_claim_vector(const int *gpio_num_array, const char *fmt); * @desc: Returns GPIO description information. If there is no such * GPIO, @desc->dev will be NULL. * @flags: Indicates the GPIO input/output settings (GPIOD_...) - * @return 0 if OK, -ENOENT if the GPIO does not exist, -EINVAL if there is + * Return: 0 if OK, -ENOENT if the GPIO does not exist, -EINVAL if there is * something wrong with the list, or other -ve for another error (e.g. * -EBUSY if a GPIO was already requested) */ @@ -598,7 +598,7 @@ int gpio_request_by_name(struct udevice *dev, const char *list_name, * @max_count: Maximum number of GPIOs to return (@desc_list must be at least * this big) * @flags: Indicates the GPIO input/output settings (GPIOD_...) - * @return number of GPIOs requested, or -ve on error + * Return: number of GPIOs requested, or -ve on error */ int gpio_request_list_by_name(struct udevice *dev, const char *list_name, struct gpio_desc *desc_list, int max_count, @@ -612,7 +612,7 @@ int gpio_request_list_by_name(struct udevice *dev, const char *list_name, * * @desc: GPIO description of GPIO to request (see dm_gpio_lookup_name()) * @label: Label to attach to the GPIO while claimed - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_gpio_request(struct gpio_desc *desc, const char *label);

@@ -629,7 +629,7 @@ int gpio_request_by_phandle(struct udevice *dev, * * @dev: Device requesting the GPIO * @list_name: Name of GPIO list (e.g. "board-id-gpios") - * @return number of GPIOs (0 for an empty property) or -ENOENT if the list + * Return: number of GPIOs (0 for an empty property) or -ENOENT if the list * does not exist */ int gpio_get_list_count(struct udevice *dev, const char *list_name); @@ -677,7 +677,7 @@ int gpio_dev_request_index(struct udevice *dev, const char *nodename, * * @dev: Device which requested the GPIO * @desc: GPIO to free - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc);

@@ -690,7 +690,7 @@ int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc); * @dev: Device which requested the GPIOs * @desc: List of GPIOs to free * @count: Number of GPIOs in the list - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int gpio_free_list(struct udevice *dev, struct gpio_desc *desc, int count);

@@ -713,7 +713,7 @@ int gpio_free_list_nodev(struct gpio_desc *desc, int count); * * @desc: GPIO description containing device, offset and flags, * previously returned by gpio_request_by_name() - * @return GPIO value (0 for inactive, 1 for active) or -ve on error + * Return: GPIO value (0 for inactive, 1 for active) or -ve on error */ int dm_gpio_get_value(const struct gpio_desc *desc);

@@ -732,7 +732,7 @@ int dm_gpio_set_value(const struct gpio_desc *desc, int value); * previously returned by gpio_request_by_name() * @clr: Flags to clear (GPIOD_...) * @set: Flags to set (GPIOD_...) - * @return 0 if OK, -EINVAL if the flags had obvious conflicts, + * Return: 0 if OK, -EINVAL if the flags had obvious conflicts, * -ERECALLCONFLICT if there was a non-obvious hardware conflict when attempting * to set the flags */ @@ -748,7 +748,7 @@ int dm_gpio_clrset_flags(struct gpio_desc *desc, ulong clr, ulong set); * @desc: GPIO description containing device, offset and flags, * previously returned by gpio_request_by_name() * @flags: New flags to use - * @return 0 if OK, -ve on error, in which case desc->flags is not updated + * Return: 0 if OK, -ve on error, in which case desc->flags is not updated */ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags);

@@ -762,7 +762,7 @@ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags); * @clr: Flags to clear (GPIOD_...), e.g. GPIOD_MASK_DIR if you are * changing the direction * @set: Flags to set (GPIOD_...) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_gpios_clrset_flags(struct gpio_desc *desc, int count, ulong clr, ulong set); @@ -775,7 +775,7 @@ int dm_gpios_clrset_flags(struct gpio_desc *desc, int count, ulong clr, * @desc: GPIO description containing device, offset and flags, * previously returned by gpio_request_by_name() * @flags: place to put the used flags - * @return 0 if OK, -ve on error, in which case desc->flags is not updated + * Return: 0 if OK, -ve on error, in which case desc->flags is not updated */ int dm_gpio_get_flags(struct gpio_desc *desc, ulong *flags);

@@ -787,7 +787,7 @@ int dm_gpio_get_flags(struct gpio_desc *desc, ulong *flags); * * @desc: GPIO description containing device, offset and flags, * previously returned by gpio_request_by_name() - * @return GPIO number, or -ve if not found + * Return: GPIO number, or -ve if not found */ int gpio_get_number(const struct gpio_desc *desc);

@@ -799,7 +799,7 @@ int gpio_get_number(const struct gpio_desc *desc); * * @desc: GPIO description to convert * @gpio: Output ACPI GPIO information - * @return ACPI pin number or -ve on error + * Return: ACPI pin number or -ve on error */ int gpio_get_acpi(const struct gpio_desc *desc, struct acpi_gpio *gpio);

diff --git a/include/audio_codec.h b/include/audio_codec.h index 2ea4ff096e..a81a315157 100644 --- a/include/audio_codec.h +++ b/include/audio_codec.h @@ -42,7 +42,7 @@ struct audio_codec_ops { * @mclk_freq: Codec clock frequency in Hz * @bits_per_sample: Must be 16 or 24 * @channels: Number of channels to use (1=mono, 2=stereo) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int audio_codec_set_params(struct udevice *dev, int interface, int rate, int mclk_freq, int bits_per_sample, uint channels); diff --git a/include/autoboot.h b/include/autoboot.h index d6915dd0cc..eb204995d0 100644 --- a/include/autoboot.h +++ b/include/autoboot.h @@ -21,7 +21,7 @@ * This is only implemented for sandbox since other platforms don't have a way * of controlling the feature at runtime. * - * @return true if enabled, false if not + * Return: true if enabled, false if not */ bool autoboot_keyed(void);

@@ -29,7 +29,7 @@ bool autoboot_keyed(void); * autoboot_set_keyed() - set whether keyed autoboot should be used * * @autoboot_keyed: true to enable the feature, false to disable - * @return old value of the flag + * Return: old value of the flag */ bool autoboot_set_keyed(bool autoboot_keyed); #else @@ -55,7 +55,7 @@ static inline bool autoboot_set_keyed(bool autoboot_keyed) * bootcmd, failbootcmd or altbootcmd depending on the current state. * Return this command so it can be executed. * - * @return command to executed + * Return: command to executed */ const char *bootdelay_process(void);

diff --git a/include/backlight.h b/include/backlight.h index b44da50bc3..c8418828d1 100644 --- a/include/backlight.h +++ b/include/backlight.h @@ -41,7 +41,7 @@ struct backlight_ops { * backlight_enable() - Enable a backlight * * @dev: Backlight device to enable - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int backlight_enable(struct udevice *dev);

@@ -50,7 +50,7 @@ int backlight_enable(struct udevice *dev); * * @dev: Backlight device to update * @percent: Brightness value (0 to 100, or BACKLIGHT_... value) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int backlight_set_brightness(struct udevice *dev, int percent);

diff --git a/include/binman.h b/include/binman.h index 5958dfb448..62a522eac3 100644 --- a/include/binman.h +++ b/include/binman.h @@ -29,7 +29,7 @@ struct binman_entry { * @name: Name of entry * @bufp: Returns a pointer to the entry * @sizep: Returns the size of the entry - * @return 0 on success, -EPERM if the ROM offset is not set, -ENOENT if the + * Return: 0 on success, -EPERM if the ROM offset is not set, -ENOENT if the * entry cannot be found, other error code other error */ int binman_entry_map(ofnode parent, const char *name, void **bufp, int *sizep); @@ -57,7 +57,7 @@ int binman_get_rom_offset(void); * * @name: Path to entry to examine (e.g. "/read-only/u-boot") * @entry: Returns information about the entry - * @return 0 if OK, -ENOENT if the path is not found, other -ve value if the + * Return: 0 if OK, -ENOENT if the path is not found, other -ve value if the * binman information is invalid (missing image-pos or size) */ int binman_entry_find(const char *name, struct binman_entry *entry); @@ -66,7 +66,7 @@ int binman_entry_find(const char *name, struct binman_entry *entry); * binman_section_find_node() - Find a binman node * * @name: Name of node to look for - * @return Node that was found, ofnode_null() if not found + * Return: Node that was found, ofnode_null() if not found */ ofnode binman_section_find_node(const char *name);

@@ -78,7 +78,7 @@ ofnode binman_section_find_node(const char *name); * * @name: Name of subnode, typically a section. This must be in the top-level * binman node - * @return 0 if OK, -EINVAL if there is no /binman node, -ECHILD if multiple + * Return: 0 if OK, -EINVAL if there is no /binman node, -ECHILD if multiple * images are being used but the first image is not available, -ENOENT if * the requested subnode cannot be found */ @@ -89,7 +89,7 @@ int binman_select_subnode(const char *name); * * This locates the binary symbol information in the device tree ready for use * - * @return 0 if OK, -ENOMEM if out of memory, -EINVAL if there is no binman node + * Return: 0 if OK, -ENOMEM if out of memory, -EINVAL if there is no binman node */ int binman_init(void);

diff --git a/include/blk.h b/include/blk.h index 133204a82e..d06098bc13 100644 --- a/include/blk.h +++ b/include/blk.h @@ -136,7 +136,7 @@ int blkcache_init(void); * @param blksz - size in bytes of each block * @param buf - buffer to contain cached data * - * @return - 1 if block returned from cache, 0 otherwise. + * Return: - 1 if block returned from cache, 0 otherwise. */ int blkcache_read(int iftype, int dev, lbaint_t start, lbaint_t blkcnt, @@ -297,7 +297,7 @@ unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start, * @if_type: Interface type (enum if_type_t) * @devnum: Device number (specific to each interface type) * @devp: the device, if found - * @return 0 if found, -ENODEV if no device found, or other -ve error value + * Return: 0 if found, -ENODEV if no device found, or other -ve error value */ int blk_find_device(int if_type, int devnum, struct udevice **devp);

@@ -307,7 +307,7 @@ int blk_find_device(int if_type, int devnum, struct udevice **devp); * @if_type: Interface type (enum if_type_t) * @devnum: Device number (specific to each interface type) * @devp: the device, if found - * @return 0 if found, -ENODEV if no device found, or other -ve error value + * Return: 0 if found, -ENODEV if no device found, or other -ve error value */ int blk_get_device(int if_type, int devnum, struct udevice **devp);

@@ -318,7 +318,7 @@ int blk_get_device(int if_type, int devnum, struct udevice **devp); * * @devnum: Device number (specific to each interface type) * @devp: the device, if found - * @return 0 if found, -ENODEV if no device, or other -ve error value + * Return: 0 if found, -ENODEV if no device, or other -ve error value */ int blk_first_device(int if_type, struct udevice **devp);

@@ -332,7 +332,7 @@ int blk_first_device(int if_type, struct udevice **devp); * * @devp: On entry, the previous device returned. On exit, the next * device, if found - * @return 0 if found, -ENODEV if no device, or other -ve error value + * Return: 0 if found, -ENODEV if no device, or other -ve error value */ int blk_next_device(struct udevice **devp);

@@ -388,7 +388,7 @@ int blk_probe_or_unbind(struct udevice *dev); * The devices are removed and then unbound. * * @if_type: Interface type to unbind - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int blk_unbind_all(int if_type);

@@ -399,7 +399,7 @@ int blk_unbind_all(int if_type); * next number is safe to use for a newly allocated device. * * @if_type: Interface type to scan - * @return maximum device number found, or -ENODEV if none, or other -ve on + * Return: maximum device number found, or -ENODEV if none, or other -ve on * error */ int blk_find_max_devnum(enum if_type if_type); @@ -411,7 +411,7 @@ int blk_find_max_devnum(enum if_type if_type); * an interface type @if_type. * * @if_type: Interface type to scan - * @return next device number safe to use, or -ve on error + * Return: next device number safe to use, or -ve on error */ int blk_next_free_devnum(enum if_type if_type);

@@ -422,7 +422,7 @@ int blk_next_free_devnum(enum if_type if_type); * * @dev: Device to update * @hwpart: Partition number to select - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int blk_select_hwpart(struct udevice *dev, int hwpart);

@@ -559,7 +559,7 @@ struct blk_driver *blk_driver_lookup_type(int if_type); * * @if_type: Block device type * @devnum: Device number - * @return point to block device descriptor, or NULL if not found + * Return: point to block device descriptor, or NULL if not found */ struct blk_desc *blk_get_devnum_by_type(enum if_type if_type, int devnum);

@@ -571,7 +571,7 @@ struct blk_desc *blk_get_devnum_by_type(enum if_type if_type, int devnum); * * @if_typename: Block device type name * @devnum: Device number - * @return point to block device descriptor, or NULL if not found + * Return: point to block device descriptor, or NULL if not found */ struct blk_desc *blk_get_devnum_by_typename(const char *if_typename, int devnum); @@ -585,7 +585,7 @@ struct blk_desc *blk_get_devnum_by_typename(const char *if_typename, * * @desc: Block device descriptor for the device to select * @hwpart: Partition number to select - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int blk_dselect_hwpart(struct blk_desc *desc, int hwpart);

@@ -596,7 +596,7 @@ int blk_dselect_hwpart(struct blk_desc *desc, int hwpart); * then displays a list of partitions. * * @if_type: Block device type - * @return 0 if OK, -ENODEV if there is none of that type + * Return: 0 if OK, -ENODEV if there is none of that type */ int blk_list_part(enum if_type if_type);

@@ -617,7 +617,7 @@ void blk_list_devices(enum if_type if_type); * * @if_type: Block device type * @devnum: Device number - * @return 0 if OK, -ENODEV for invalid device number + * Return: 0 if OK, -ENODEV for invalid device number */ int blk_show_device(enum if_type if_type, int devnum);

@@ -629,7 +629,7 @@ int blk_show_device(enum if_type if_type, int devnum); * * @if_type: Block device type * @devnum: Device number - * @return 0 if OK, -ENODEV for invalid device number, -ENOENT if the block + * Return: 0 if OK, -ENODEV for invalid device number, -ENOENT if the block * device is not connected */ int blk_print_device_num(enum if_type if_type, int devnum); @@ -639,7 +639,7 @@ int blk_print_device_num(enum if_type if_type, int devnum); * * @if_type: Block device type * @devnum: Device number - * @return 0 if OK, -ENOENT if the block device is not connected, -ENOSYS if + * Return: 0 if OK, -ENOENT if the block device is not connected, -ENOSYS if * the interface type is not supported, other -ve on other error */ int blk_print_part_devnum(enum if_type if_type, int devnum); @@ -651,7 +651,7 @@ int blk_print_part_devnum(enum if_type if_type, int devnum); * @devnum: Device number * @blkcnt: Number of blocks to read * @buffer: Address to write data to - * @return number of blocks read, or -ve error number on error + * Return: number of blocks read, or -ve error number on error */ ulong blk_read_devnum(enum if_type if_type, int devnum, lbaint_t start, lbaint_t blkcnt, void *buffer); @@ -663,7 +663,7 @@ ulong blk_read_devnum(enum if_type if_type, int devnum, lbaint_t start, * @devnum: Device number * @blkcnt: Number of blocks to write * @buffer: Address to read data from - * @return number of blocks written, or -ve error number on error + * Return: number of blocks written, or -ve error number on error */ ulong blk_write_devnum(enum if_type if_type, int devnum, lbaint_t start, lbaint_t blkcnt, const void *buffer); @@ -677,7 +677,7 @@ ulong blk_write_devnum(enum if_type if_type, int devnum, lbaint_t start, * @if_type: Block device type * @devnum: Device number * @hwpart: Partition number to select - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int blk_select_hwpart_devnum(enum if_type if_type, int devnum, int hwpart);

@@ -685,7 +685,7 @@ int blk_select_hwpart_devnum(enum if_type if_type, int devnum, int hwpart); * blk_get_if_type_name() - Get the name of an interface type * * @if_type: Interface type to check - * @return name of interface, or NULL if none + * Return: name of interface, or NULL if none */ const char *blk_get_if_type_name(enum if_type if_type);

@@ -696,7 +696,7 @@ const char *blk_get_if_type_name(enum if_type if_type); * @argv: Command arguments * @if_type: Interface type * @cur_devnump: Current device number for this interface type - * @return 0 if OK, CMD_RET_ERROR on error + * Return: 0 if OK, CMD_RET_ERROR on error */ int blk_common_cmd(int argc, char *const argv[], enum if_type if_type, int *cur_devnump); @@ -714,7 +714,7 @@ enum blk_flag_t { * * @flags: Indicates type of device to return * @devp: Returns pointer to the first device in that uclass, or NULL if none - * @return 0 if found, -ENODEV if not found, other -ve on error + * Return: 0 if found, -ENODEV if not found, other -ve on error */ int blk_first_device_err(enum blk_flag_t flags, struct udevice **devp);

@@ -727,7 +727,7 @@ int blk_first_device_err(enum blk_flag_t flags, struct udevice **devp); * @devp: On entry, pointer to device to lookup. On exit, returns pointer * to the next device in the uclass if no error occurred, or -ENODEV if * there is no next device. - * @return 0 if found, -ENODEV if not found, other -ve on error + * Return: 0 if found, -ENODEV if not found, other -ve on error */ int blk_next_device_err(enum blk_flag_t flags, struct udevice **devp);

@@ -751,7 +751,7 @@ int blk_next_device_err(enum blk_flag_t flags, struct udevice **devp); * blk_count_devices() - count the number of devices of a particular type * * @flags: Indicates type of device to find - * @return number of devices matching those flags + * Return: number of devices matching those flags */ int blk_count_devices(enum blk_flag_t flag);

diff --git a/include/boot_fit.h b/include/boot_fit.h index f75fed66bc..092cfb0b7f 100644 --- a/include/boot_fit.h +++ b/include/boot_fit.h @@ -8,6 +8,6 @@ * locate_dtb_in_fit - Find a DTB matching the board in a FIT image * @fit: pointer to the FIT image * - * @return a pointer to a matching DTB blob if found, NULL otherwise + * Return: a pointer to a matching DTB blob if found, NULL otherwise */ void *locate_dtb_in_fit(const void *fit); diff --git a/include/bootcount.h b/include/bootcount.h index 796b237c8f..fccee7e15b 100644 --- a/include/bootcount.h +++ b/include/bootcount.h @@ -45,7 +45,7 @@ struct bootcount_ops { * * @dev: Device to read from * @bootcount: Place to put the current bootcount - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_bootcount_get(struct udevice *dev, u32 *bootcount);

@@ -54,7 +54,7 @@ int dm_bootcount_get(struct udevice *dev, u32 *bootcount); * * @dev: Device to read from * @bootcount: Value to be written to the backing storage - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_bootcount_set(struct udevice *dev, u32 bootcount);

@@ -66,7 +66,7 @@ void bootcount_store(ulong); /** * bootcount_load() - load the current bootcount * - * @return bootcount, read from the appropriate location + * Return: bootcount, read from the appropriate location */ ulong bootcount_load(void);

diff --git a/include/bootm.h b/include/bootm.h index 48fc668cf3..7ed5650fca 100644 --- a/include/bootm.h +++ b/include/bootm.h @@ -29,7 +29,7 @@ struct cmd_tbl; * argc is adjusted accordingly. This avoids confusion as to how * many arguments are available for the OS. * @images: Pointers to os/initrd/fdt - * @return 1 on error. On success the OS boots so this function does + * Return: 1 on error. On success the OS boots so this function does * not return. */ typedef int boot_os_fn(int flag, int argc, char *const argv[], @@ -106,7 +106,7 @@ void board_preboot_os(void); * @buf: buffer holding commandline string to adjust * @maxlen: Maximum length of buffer at @buf (including \0) * @flags: Flags to control what happens (see bootm_cmdline_t) - * @return 0 if OK, -ENOMEM if out of memory, -ENOSPC if the commandline is too + * Return: 0 if OK, -ENOMEM if out of memory, -ENOSPC if the commandline is too * long */ int bootm_process_cmdline(char *buf, int maxlen, int flags); @@ -120,7 +120,7 @@ int bootm_process_cmdline(char *buf, int maxlen, int flags); * - performing substitutions in the command line ('bootargs_subst' envvar) * * @flags: Flags to control what happens (see bootm_cmdline_t) - * @return 0 if OK, -ENOMEM if out of memory + * Return: 0 if OK, -ENOMEM if out of memory */ int bootm_process_cmdline_env(int flags);

diff --git a/include/bootretry.h b/include/bootretry.h index 0cedd300c3..1e8aa83a5b 100644 --- a/include/bootretry.h +++ b/include/bootretry.h @@ -14,7 +14,7 @@ * Check for a keypress repeatedly, resetting the watchdog each time. If a * keypress is not received within the command timeout, return an error. * - * @return 0 if a key is received in time, -ETIMEDOUT if not + * Return: 0 if a key is received in time, -ETIMEDOUT if not */ int bootretry_tstc_timeout(void);

diff --git a/include/bootstage.h b/include/bootstage.h index 8d1989ac0e..99a334ad54 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -248,7 +248,7 @@ void show_boot_progress(int val); * Call this after relocation has happened and after malloc has been initted. * We need to copy any pointers in bootstage records that were added pre- * relocation, since memory can be overwritten later. - * @return Always returns 0, to indicate success + * Return: Always returns 0, to indicate success */ int bootstage_relocate(void);

@@ -280,7 +280,7 @@ ulong bootstage_mark_name(enum bootstage_id id, const char *name); * @param file Filename to record (NULL if none) * @param func Function name to record * @param linenum Line number to record - * @return recorded time stamp + * Return: recorded time stamp */ ulong bootstage_mark_code(const char *file, const char *func, int linenum); @@ -294,7 +294,7 @@ ulong bootstage_mark_code(const char *file, const char *func, * * @param id Bootstage id to record this timestamp against * @param name Textual name to display for this id in the report (maybe NULL) - * @return start timestamp in microseconds + * Return: start timestamp in microseconds */ uint32_t bootstage_start(enum bootstage_id id, const char *name);

@@ -306,7 +306,7 @@ uint32_t bootstage_start(enum bootstage_id id, const char *name); * as many times as you like. * * @param id Bootstage id to record this timestamp against - * @return time spent in this iteration of the activity (i.e. the time now + * Return: time spent in this iteration of the activity (i.e. the time now * less the start time recorded in the last bootstage_start() call * with this id. */ @@ -318,7 +318,7 @@ void bootstage_report(void); /** * Add bootstage information to the device tree * - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ int bootstage_fdt_add_report(void);

@@ -327,7 +327,7 @@ int bootstage_fdt_add_report(void); * * @param base Base address of memory buffer * @param size Size of memory buffer - * @return 0 if stashed ok, -1 if out of space + * Return: 0 if stashed ok, -1 if out of space */ int bootstage_stash(void *base, int size);

@@ -339,7 +339,7 @@ int bootstage_stash(void *base, int size); * * @param base Base address of memory buffer * @param size Size of memory buffer (-1 if unknown) - * @return 0 if unstashed ok, -ENOENT if bootstage info not found, -ENOSPC if + * Return: 0 if unstashed ok, -ENOENT if bootstage info not found, -ENOSPC if * there is not space for read the stashed data, or other error if * something else went wrong */ @@ -348,7 +348,7 @@ int bootstage_unstash(const void *base, int size); /** * bootstage_get_size() - Get the size of the bootstage data * - * @return size of boostage data in bytes + * Return: size of boostage data in bytes */ int bootstage_get_size(void);

diff --git a/include/button.h b/include/button.h index ee14fadf0c..96e6b1901f 100644 --- a/include/button.h +++ b/include/button.h @@ -46,7 +46,7 @@ struct button_ops { * * @label: button label to look up * @devp: Returns the associated device, if found - * @return 0 if found, -ENODEV if not found, other -ve on error + * Return: 0 if found, -ENODEV if not found, other -ve on error */ int button_get_by_label(const char *label, struct udevice **devp);

@@ -54,7 +54,7 @@ int button_get_by_label(const char *label, struct udevice **devp); * button_get_state() - get the state of a button * * @dev: button device to change - * @return button state button_state_t, or -ve on error + * Return: button state button_state_t, or -ve on error */ enum button_state_t button_get_state(struct udevice *dev);

diff --git a/include/cache.h b/include/cache.h index ecb7956efd..b12fec2591 100644 --- a/include/cache.h +++ b/include/cache.h @@ -49,7 +49,7 @@ struct cache_ops { * * @dev: Device to check (UCLASS_CACHE) * @info: Returns cache info - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cache_get_info(struct udevice *dev, struct cache_info *info);

@@ -57,7 +57,7 @@ int cache_get_info(struct udevice *dev, struct cache_info *info); * cache_enable() - Enable cache * * @dev: Device to check (UCLASS_CACHE) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cache_enable(struct udevice *dev);

@@ -65,7 +65,7 @@ int cache_enable(struct udevice *dev); * cache_disable() - Flush and disable cache * * @dev: Device to check (UCLASS_CACHE) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cache_disable(struct udevice *dev); #endif diff --git a/include/cbfs.h b/include/cbfs.h index ae94f1dcdf..7449873b49 100644 --- a/include/cbfs.h +++ b/include/cbfs.h @@ -136,14 +136,14 @@ struct cbfs_cachenode { * file_cbfs_error() - Return a string describing the most recent error * condition. * - * @return A pointer to the constant string. + * Return: A pointer to the constant string. */ const char *file_cbfs_error(void);

/** * cbfs_get_result() - Get the result of the last CBFS operation * - *@return last result + *Return: last result */ enum cbfs_result cbfs_get_result(void);

@@ -151,21 +151,21 @@ enum cbfs_result cbfs_get_result(void); * file_cbfs_init() - Initialize the CBFS driver and load metadata into RAM. * * @end_of_rom: Points to the end of the ROM the CBFS should be read from - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int file_cbfs_init(ulong end_of_rom);

/** * file_cbfs_get_header() - Get the header structure for the current CBFS. * - * @return A pointer to the constant structure, or NULL if there is none. + * Return: A pointer to the constant structure, or NULL if there is none. */ const struct cbfs_header *file_cbfs_get_header(void);

/** * cbfs_get_first() - Get the first file in a CBFS * - * @return pointer to first file, or NULL if it is empty + * Return: pointer to first file, or NULL if it is empty */ const struct cbfs_cachenode *cbfs_get_first(const struct cbfs_priv *priv);

@@ -180,7 +180,7 @@ void cbfs_get_next(const struct cbfs_cachenode **filep); /** * file_cbfs_get_first() - Get a handle for the first file in CBFS. * - * @return A handle for the first file in CBFS, NULL on error. + * Return: A handle for the first file in CBFS, NULL on error. */ const struct cbfs_cachenode *file_cbfs_get_first(void);

@@ -196,7 +196,7 @@ void file_cbfs_get_next(const struct cbfs_cachenode **file); * * @name: The name to search for. * - * @return A handle to the file, or NULL on error. + * Return: A handle to the file, or NULL on error. */ const struct cbfs_cachenode *file_cbfs_find(const char *name);

@@ -205,7 +205,7 @@ const struct cbfs_cachenode *file_cbfs_find(const char *name); * * @cbfs: CBFS to look in (use cbfs_init_mem() to set it up) * @name: Filename to look for - * @return pointer to CBFS node if found, else NULL + * Return: pointer to CBFS node if found, else NULL */ const struct cbfs_cachenode *cbfs_find_file(struct cbfs_priv *cbfs, const char *name); @@ -217,7 +217,7 @@ const struct cbfs_cachenode *cbfs_find_file(struct cbfs_priv *cbfs, * @size: Size of CBFS if known, else CBFS_SIZE_UNKNOWN * @require_header: true to read a header at the start, false to not require one * @cbfsp: Returns a pointer to CBFS on success - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cbfs_init_mem(ulong base, ulong size, bool require_hdr, struct cbfs_priv **privp); @@ -235,7 +235,7 @@ int cbfs_init_mem(ulong base, ulong size, bool require_hdr, * @end_of_rom: Points to the end of the ROM the CBFS should be read from * @name: The name to search for * @node: Returns the contents of the node if found (i.e. copied into *node) - * @return 0 on success, -ENOENT if not found, -EFAULT on bad header + * Return: 0 on success, -ENOENT if not found, -EFAULT on bad header */ int file_cbfs_find_uncached(ulong end_of_rom, const char *name, struct cbfs_cachenode *node); @@ -249,7 +249,7 @@ int file_cbfs_find_uncached(ulong end_of_rom, const char *name, * @base: Points to the base of the CBFS * @name: The name to search for * @node: Returns the contents of the node if found (i.e. copied into *node) - * @return 0 on success, -ENOENT if not found, -EFAULT on bad header + * Return: 0 on success, -ENOENT if not found, -EFAULT on bad header */ int file_cbfs_find_uncached_base(ulong base, const char *name, struct cbfs_cachenode *node); @@ -259,7 +259,7 @@ int file_cbfs_find_uncached_base(ulong base, const char *name, * * @file: The handle to the file. * - * @return The name of the file, NULL on error. + * Return: The name of the file, NULL on error. */ const char *file_cbfs_name(const struct cbfs_cachenode *file);

@@ -268,7 +268,7 @@ const char *file_cbfs_name(const struct cbfs_cachenode *file); * * @file: The handle to the file. * - * @return The size of the file, zero on error. + * Return: The size of the file, zero on error. */ u32 file_cbfs_size(const struct cbfs_cachenode *file);

@@ -277,7 +277,7 @@ u32 file_cbfs_size(const struct cbfs_cachenode *file); * * @file: The handle to the file. * - * @return The type of the file, zero on error. + * Return: The type of the file, zero on error. */ u32 file_cbfs_type(const struct cbfs_cachenode *file);

@@ -288,7 +288,7 @@ u32 file_cbfs_type(const struct cbfs_cachenode *file); * @buffer: Where to read it into memory. * @maxsize: Maximum number of bytes to read * - * @return If positive or zero, the number of characters read. If negative, an + * Return: If positive or zero, the number of characters read. If negative, an * error occurred. */ long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer, diff --git a/include/cli.h b/include/cli.h index 3449fa6ae7..ba5b8ebd36 100644 --- a/include/cli.h +++ b/include/cli.h @@ -20,7 +20,7 @@ void cli_simple_loop(void); * * @cmd: String containing the command to execute * @flag Flag value - see CMD_FLAG_... - * @return 1 - command executed, repeatable + * Return: 1 - command executed, repeatable * 0 - command executed but not repeatable, interrupted commands are * always considered not repeatable * -1 - not executed (unrecognized, bootd recursion or too many args) @@ -35,7 +35,7 @@ int cli_simple_run_command(const char *cmd, int flag); * @param input Input string possible containing $() / ${} vars * @param output Output string with $() / ${} vars expanded * @param max_size Maximum size of @output (including terminator) - * @return 0 if OK, -ENOSPC if we ran out of space in @output + * Return: 0 if OK, -ENOSPC if we ran out of space in @output */ int cli_simple_process_macros(const char *input, char *output, int max_size);

@@ -50,7 +50,7 @@ int cli_simple_process_macros(const char *input, char *output, int max_size); * * @param cmd String containing list of commands * @param flag Execution flags (CMD_FLAG_...) - * @return 0 on success, or != 0 on error. + * Return: 0 on success, or != 0 on error. */ int cli_simple_run_command_list(char *cmd, int flag);

@@ -60,7 +60,7 @@ int cli_simple_run_command_list(char *cmd, int flag); * This is a convenience function which calls cli_readline_into_buffer(). * * @prompt: Prompt to display - * @return command line length excluding terminator, or -ve on error + * Return: command line length excluding terminator, or -ve on error */ int cli_readline(const char *const prompt);

@@ -82,7 +82,7 @@ int cli_readline(const char *const prompt); * @prompt: Prompt to display * @buffer: Place to put the line that is entered * @timeout: Timeout in milliseconds, 0 if none - * @return command line length excluding terminator, or -ve on error: of the + * Return: command line length excluding terminator, or -ve on error: of the * timeout is exceeded (either CONFIG_BOOT_RETRY_TIME or the timeout * parameter), then -2 is returned. If a break is detected (Ctrl-C) then * -1 is returned. @@ -105,7 +105,7 @@ int cli_readline_into_buffer(const char *const prompt, char *buffer, * * @line: Command line to parse * @args: Array to hold arguments - * @return number of arguments + * Return: number of arguments */ int cli_simple_parse_line(char *line, char *argv[]);

@@ -121,7 +121,7 @@ int cli_simple_parse_line(char *line, char *argv[]); * @cmdp: On entry, the command that will be executed if the FDT does * not have a command. Returns the command to execute after * checking the FDT. - * @return true to execute securely, else false + * Return: true to execute securely, else false */ bool cli_process_fdt(const char **cmdp);

diff --git a/include/clk.h b/include/clk.h index df5255e510..040d2d60f7 100644 --- a/include/clk.h +++ b/include/clk.h @@ -112,7 +112,7 @@ struct phandle_1_arg; * @dev: Device containing the phandle * @cells: Phandle info * @clock: A pointer to a clock struct to initialise - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_get_by_phandle(struct udevice *dev, const struct phandle_1_arg *cells, struct clk *clk); @@ -130,7 +130,7 @@ int clk_get_by_phandle(struct udevice *dev, const struct phandle_1_arg *cells, * @index: The index of the clock to request, within the client's list of * clocks. * @clock A pointer to a clock struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_get_by_index(struct udevice *dev, int index, struct clk *clk);

@@ -144,7 +144,7 @@ int clk_get_by_index(struct udevice *dev, int index, struct clk *clk); * @index: The index of the clock to request, within the client's list of * clocks. * @clock A pointer to a clock struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_get_by_index_nodev(ofnode node, int index, struct clk *clk);

@@ -159,7 +159,7 @@ int clk_get_by_index_nodev(ofnode node, int index, struct clk *clk); * * @dev: The client device. * @bulk A pointer to a clock bulk struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk);

@@ -176,7 +176,7 @@ int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk); * @name: The name of the clock to request, within the client's list of * clocks. * @clock: A pointer to a clock struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk);

@@ -189,7 +189,7 @@ int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk); * @name: The name of the clock to request, within the client's list of * clocks. * @clock: A pointer to a clock struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_get_by_name_nodev(ofnode node, const char *name, struct clk *clk);

@@ -249,7 +249,7 @@ struct clk *devm_clk_get_optional(struct udevice *dev, const char *id); * @clk: A clock struct array that was previously successfully * requested by clk_request/get_by_*(). * @count Number of clock contained in the array - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int clk_release_all(struct clk *clk, int count);

@@ -351,7 +351,7 @@ static inline int clk_set_defaults(struct udevice *dev, int stage) * * @clk: A clock bulk struct that was previously successfully * requested by clk_get_bulk(). - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ static inline int clk_release_bulk(struct clk_bulk *bulk) { @@ -371,7 +371,7 @@ static inline int clk_release_bulk(struct clk_bulk *bulk) * @clock: A pointer to a clock struct to initialize. The caller must * have already initialized any field in this struct which the * clock provider uses to identify the clock. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_request(struct udevice *dev, struct clk *clk);

@@ -380,7 +380,7 @@ int clk_request(struct udevice *dev, struct clk *clk); * * @clock: A clock struct that was previously successfully requested by * clk_request/get_by_*(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int clk_free(struct clk *clk);

@@ -389,7 +389,7 @@ int clk_free(struct clk *clk); * * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). - * @return clock rate in Hz on success, 0 for invalid clock, or -ve error code + * Return: clock rate in Hz on success, 0 for invalid clock, or -ve error code * for other errors. */ ulong clk_get_rate(struct clk *clk); @@ -399,7 +399,7 @@ ulong clk_get_rate(struct clk *clk); * * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). - * @return pointer to parent's struct clk, or error code passed as pointer + * Return: pointer to parent's struct clk, or error code passed as pointer */ struct clk *clk_get_parent(struct clk *clk);

@@ -408,7 +408,7 @@ struct clk *clk_get_parent(struct clk *clk); * * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). - * @return clock rate in Hz, or -ve error code. + * Return: clock rate in Hz, or -ve error code. */ long long clk_get_parent_rate(struct clk *clk);

@@ -431,7 +431,7 @@ long long clk_get_parent_rate(struct clk *clk); * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). * @rate: desired clock rate in Hz. - * @return rounded rate in Hz, or -ve error code. + * Return: rounded rate in Hz, or -ve error code. */ ulong clk_round_rate(struct clk *clk, ulong rate);

@@ -441,7 +441,7 @@ ulong clk_round_rate(struct clk *clk, ulong rate); * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). * @rate: New clock rate in Hz. - * @return new rate, or -ve error code. + * Return: new rate, or -ve error code. */ ulong clk_set_rate(struct clk *clk, ulong rate);

@@ -452,7 +452,7 @@ ulong clk_set_rate(struct clk *clk, ulong rate); * clk_request/get_by_*(). * @parent: A clock struct that was previously successfully requested by * clk_request/get_by_*(). - * @return new rate, or -ve error code. + * Return: new rate, or -ve error code. */ int clk_set_parent(struct clk *clk, struct clk *parent);

@@ -461,7 +461,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent); * * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int clk_enable(struct clk *clk);

@@ -470,7 +470,7 @@ int clk_enable(struct clk *clk); * * @bulk: A clock bulk struct that was previously successfully requested * by clk_get_bulk(). - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int clk_enable_bulk(struct clk_bulk *bulk);

@@ -479,7 +479,7 @@ int clk_enable_bulk(struct clk_bulk *bulk); * * @clk: A clock struct that was previously successfully requested by * clk_request/get_by_*(). - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int clk_disable(struct clk *clk);

@@ -488,7 +488,7 @@ int clk_disable(struct clk *clk); * * @bulk: A clock bulk struct that was previously successfully requested * by clk_get_bulk(). - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int clk_disable_bulk(struct clk_bulk *bulk);

@@ -511,7 +511,7 @@ bool clk_is_match(const struct clk *p, const struct clk *q); * * @clkp: A pointer to clock struct that has been found among added clocks * to UCLASS_CLK - * @return zero on success, or -ENOENT on error + * Return: zero on success, or -ENOENT on error */ int clk_get_by_id(ulong id, struct clk **clkp);

@@ -520,7 +520,7 @@ int clk_get_by_id(ulong id, struct clk **clkp); * * @clk A pointer to the clk * - * @return true on binded, or false on no + * Return: true on binded, or false on no */ bool clk_dev_binded(struct clk *clk);

@@ -606,7 +606,7 @@ static inline bool clk_dev_binded(struct clk *clk) * clk_valid() - check if clk is valid * * @clk: the clock to check - * @return true if valid, or false + * Return: true if valid, or false */ static inline bool clk_valid(struct clk *clk) { diff --git a/include/clk/sunxi.h b/include/clk/sunxi.h index d4ad5fd0ba..a2239b990b 100644 --- a/include/clk/sunxi.h +++ b/include/clk/sunxi.h @@ -91,7 +91,7 @@ extern struct clk_ops sunxi_clk_ops; * * @dev: reset device * @count: reset count - * @return 0 success, or error value + * Return: 0 success, or error value */ int sunxi_reset_bind(struct udevice *dev, ulong count);

diff --git a/include/command.h b/include/command.h index f8e07a591c..0cf12fde39 100644 --- a/include/command.h +++ b/include/command.h @@ -96,7 +96,7 @@ int cmd_auto_complete(const char *const prompt, char *buf, int *np, * * @cmdtp: Command which caused the error * @err: Error code (0 if none, -ve for error, like -EIO) - * @return 0 (CMD_RET_SUCCESS) if there is not error, + * Return: 0 (CMD_RET_SUCCESS) if there is not error, * 1 (CMD_RET_FAILURE) if an error is found * -1 (CMD_RET_USAGE) if 'usage' error is found */ @@ -138,7 +138,7 @@ int cmd_process_error(struct cmd_tbl *cmdtp, int err); * @arg: Pointers to the command to check. If a valid specifier is present it * will be the last character of the string, following a '.' * @default_size: Default size to return if there is no specifier - * @return data size in bytes (1, 2, 4, 8) or CMD_DATA_SIZE_ERR for an invalid + * Return: data size in bytes (1, 2, 4, 8) or CMD_DATA_SIZE_ERR for an invalid * character, or CMD_DATA_SIZE_STR for a string */ int cmd_get_data_size(char *arg, int default_size); @@ -198,7 +198,7 @@ int do_env_set_efi(struct cmd_tbl *cmdtp, int flag, int argc, * @s: String to replace with * @global: true to replace all matches in @data, false to replace just the * first - * @return 0 if OK, 1 on error + * Return: 0 if OK, 1 on error */ int setexpr_regex_sub(char *data, uint data_size, char *nbuf, uint nbuf_size, const char *r, const char *s, bool global); @@ -229,7 +229,7 @@ enum command_ret_t { * is left unchanged. * @param ticks If ticks is not null, this function set it to the * number of ticks the command took to complete. - * @return 0 if the command succeeded, 1 if it failed + * Return: 0 if the command succeeded, 1 if it failed */ int cmd_process(int flag, int argc, char *const argv[], int *repeatable, unsigned long *ticks); @@ -250,7 +250,7 @@ void fixup_cmdtable(struct cmd_tbl *cmdtp, int size); * simply hang. * * @cmdline: Command line string to execute - * @return 0 if OK, 1 for error + * Return: 0 if OK, 1 for error */ int board_run_command(const char *cmdline);

@@ -266,7 +266,7 @@ int run_command_repeatable(const char *cmd, int flag); * @param cmd List of commands to run, each separated bu semicolon * @param len Length of commands excluding terminator if known (-1 if not) * @param flag Execution flags (CMD_FLAG_...) - * @return 0 on success, or != 0 on error. + * Return: 0 on success, or != 0 on error. */ int run_command_list(const char *cmd, int len, int flag); #endif /* __ASSEMBLY__ */ diff --git a/include/compiler.h b/include/compiler.h index 8cf11792e2..ef7b2cb1f7 100644 --- a/include/compiler.h +++ b/include/compiler.h @@ -157,7 +157,7 @@ typedef unsigned long int uintptr_t; /** * tools_build() - check if we are building host tools * - * @return true if building for the host, false if for a target + * Return: true if building for the host, false if for a target */ static inline bool tools_build(void) { diff --git a/include/console.h b/include/console.h index b182440fcd..ceb733b5cb 100644 --- a/include/console.h +++ b/include/console.h @@ -33,7 +33,7 @@ int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */ * Iterates over registered STDIO devices and match them with given @flags * and @name. * - * @return pointer to the &struct stdio_dev if found, or NULL otherwise + * Return: pointer to the &struct stdio_dev if found, or NULL otherwise */ struct stdio_dev *console_search_dev(int flags, const char *name);

@@ -44,7 +44,7 @@ struct stdio_dev *console_search_dev(int flags, const char *name); * This should be called as soon as malloc() is available so that the maximum * amount of console output can be recorded. * - * @return 0 if OK, -ENOMEM if out of memory + * Return: 0 if OK, -ENOMEM if out of memory */ int console_record_init(void);

@@ -60,7 +60,7 @@ void console_record_reset(void); * * This should be called to enable the console buffer. * - * @return 0 (always) + * Return: 0 (always) */ int console_record_reset_enable(void);

@@ -72,7 +72,7 @@ int console_record_reset_enable(void); * * @str: Place to put string * @maxlen: Maximum length of @str including nul terminator - * @return length of string returned, or -ENOSPC if the console buffer was + * Return: length of string returned, or -ENOSPC if the console buffer was * overflowed by the output */ int console_record_readline(char *str, int maxlen); @@ -80,7 +80,7 @@ int console_record_readline(char *str, int maxlen); /** * console_record_avail() - Get the number of available bytes in console output * - * @return available bytes (0 if empty) + * Return: available bytes (0 if empty) */ int console_record_avail(void);

@@ -91,7 +91,7 @@ int console_record_avail(void); * returned if a function calls e.g. `getc()` * * @str: the string to write - * @return the number of bytes added + * Return: the number of bytes added */ int console_in_puts(const char *str); #else @@ -141,7 +141,7 @@ static inline int console_in_puts(const char *str) * This function prints a banner on devices which (we assume) did not receive * it before relocation. * - * @return 0 (meaning no errors) + * Return: 0 (meaning no errors) */ int console_announce_r(void);

diff --git a/include/cpu_func.h b/include/cpu_func.h index 23cd5eca39..45e8a0a057 100644 --- a/include/cpu_func.h +++ b/include/cpu_func.h @@ -45,7 +45,7 @@ int is_core_valid(unsigned int core); * This is used on PowerPC, SH and X86 machines as a CPU init mechanism. It is * called during the pre-relocation init sequence in board_init_f(). * - * @return 0 if oK, -ve on error + * Return: 0 if oK, -ve on error */ int checkcpu(void);

diff --git a/include/cros_ec.h b/include/cros_ec.h index ef89deff76..2a7728622c 100644 --- a/include/cros_ec.h +++ b/include/cros_ec.h @@ -67,7 +67,7 @@ struct fdt_cros_ec { * @param dev CROS-EC device * @param id Place to put the ID * @param maxlen Maximum length of the ID field - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_read_id(struct udevice *dev, char *id, int maxlen);

@@ -78,7 +78,7 @@ int cros_ec_read_id(struct udevice *dev, char *id, int maxlen); * * @param dev CROS-EC device * @param scan Place to put the scan results - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan);

@@ -88,7 +88,7 @@ int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan); * Send a message requesting the next event and return the result. * * @param event Place to put the event. - * @return 0 if ok, <0 on error. + * Return: 0 if ok, <0 on error. */ int cros_ec_get_next_event(struct udevice *dev, struct ec_response_get_next_event *event); @@ -98,7 +98,7 @@ int cros_ec_get_next_event(struct udevice *dev, * * @param dev CROS-EC device * @param image Destination for image identifier - * @return 0 if ok, <0 on error + * Return: 0 if ok, <0 on error */ int cros_ec_read_current_image(struct udevice *dev, enum ec_current_image *image); @@ -109,7 +109,7 @@ int cros_ec_read_current_image(struct udevice *dev, * @param dev CROS-EC device * @param hash_offset Offset in flash to read from * @param hash Destination for hash information - * @return 0 if ok, <0 on error + * Return: 0 if ok, <0 on error */ int cros_ec_read_hash(struct udevice *dev, uint hash_offset, struct ec_response_vboot_hash *hash); @@ -122,7 +122,7 @@ int cros_ec_read_hash(struct udevice *dev, uint hash_offset, * @param dev CROS-EC device * @param cmd Reboot command * @param flags Flags for reboot command (EC_REBOOT_FLAG_*) - * @return 0 if ok, <0 on error + * Return: 0 if ok, <0 on error */ int cros_ec_reboot(struct udevice *dev, enum ec_reboot_cmd cmd, uint8_t flags);

@@ -133,7 +133,7 @@ int cros_ec_reboot(struct udevice *dev, enum ec_reboot_cmd cmd, uint8_t flags); * If no external interrupt is configured, this always returns 1. * * @param dev CROS-EC device - * @return 0 if no interrupt is pending + * Return: 0 if no interrupt is pending */ int cros_ec_interrupt_pending(struct udevice *dev);

@@ -151,7 +151,7 @@ enum { * * @param blob Device tree blob containing setup information * @param cros_ecp Returns pointer to the cros_ec device, or NULL if none - * @return 0 if we got an cros_ec device and all is well (or no cros_ec is + * Return: 0 if we got an cros_ec device and all is well (or no cros_ec is * expected), -ve if we should have an cros_ec device but failed to find * one, or init failed (-CROS_EC_ERR_...). */ @@ -170,7 +170,7 @@ int cros_ec_info(struct udevice *dev, struct ec_response_mkbp_info *info); * * @param dev CROS-EC device * @param events_ptr Destination for event flags. Not changed on error. - * @return 0 if ok, <0 on error + * Return: 0 if ok, <0 on error */ int cros_ec_get_host_events(struct udevice *dev, uint32_t *events_ptr);

@@ -179,7 +179,7 @@ int cros_ec_get_host_events(struct udevice *dev, uint32_t *events_ptr); * * @param dev CROS-EC device * @param events Event flags to clear - * @return 0 if ok, <0 on error + * Return: 0 if ok, <0 on error */ int cros_ec_clear_host_events(struct udevice *dev, uint32_t events);

@@ -192,7 +192,7 @@ int cros_ec_clear_host_events(struct udevice *dev, uint32_t events); * @param set_flags New flag values; only bits in set_mask are applied; * ignored if set_mask=0. * @param prot Destination for updated protection state from EC. - * @return 0 if ok, <0 on error + * Return: 0 if ok, <0 on error */ int cros_ec_flash_protect(struct udevice *dev, uint32_t set_mask, uint32_t set_flags, @@ -202,7 +202,7 @@ int cros_ec_flash_protect(struct udevice *dev, uint32_t set_mask, * Run internal tests on the cros_ec interface. * * @param dev CROS-EC device - * @return 0 if ok, <0 if the test failed + * Return: 0 if ok, <0 if the test failed */ int cros_ec_test(struct udevice *dev);

@@ -212,7 +212,7 @@ int cros_ec_test(struct udevice *dev); * @param dev CROS-EC device * @param image the content to write * @param imafge_size content length - * @return 0 if ok, <0 if the test failed + * Return: 0 if ok, <0 if the test failed */ int cros_ec_flash_update_rw(struct udevice *dev, const uint8_t *image, int image_size); @@ -220,7 +220,7 @@ int cros_ec_flash_update_rw(struct udevice *dev, const uint8_t *image, /** * Return a pointer to the board's CROS-EC device * - * @return pointer to CROS-EC device, or NULL if none is available + * Return: pointer to CROS-EC device, or NULL if none is available */ struct udevice *board_get_cros_ec_dev(void);

@@ -302,7 +302,7 @@ void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len); * * @param data Data block to checksum * @param size Size of data block in bytes - * @return checksum value (0 to 255) + * Return: checksum value (0 to 255) */ int cros_ec_calc_checksum(const uint8_t *data, int size);

@@ -321,7 +321,7 @@ int cros_ec_flash_erase(struct udevice *dev, uint32_t offset, uint32_t size); * @param data Pointer to data buffer to read into * @param offset Offset within flash to read from * @param size Number of bytes to read - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_flash_read(struct udevice *dev, uint8_t *data, uint32_t offset, uint32_t size); @@ -353,7 +353,7 @@ int cros_ec_read_flashinfo(struct udevice *dev, * @param data Pointer to data buffer to write * @param offset Offset within flash to write to. * @param size Number of bytes to write - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_flash_write(struct udevice *dev, const uint8_t *data, uint32_t offset, uint32_t size); @@ -365,7 +365,7 @@ int cros_ec_flash_write(struct udevice *dev, const uint8_t *data, * @param region Flash region to query * @param offset Returns offset of flash region in EC flash * @param size Returns size of flash region - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_flash_offset(struct udevice *dev, enum ec_flash_region region, uint32_t *offset, uint32_t *size); @@ -383,7 +383,7 @@ int cros_ec_get_sku_id(struct udevice *dev); * * @param dev CROS-EC device * @param block Buffer of VbNvContext to be read/write - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_read_nvdata(struct udevice *dev, uint8_t *block, int size); int cros_ec_write_nvdata(struct udevice *dev, const uint8_t *block, int size); @@ -393,7 +393,7 @@ int cros_ec_write_nvdata(struct udevice *dev, const uint8_t *block, int size); * * @param dev CROS-EC device * @param versionp This is set to point to the version information - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_read_version(struct udevice *dev, struct ec_response_get_version **versionp); @@ -403,7 +403,7 @@ int cros_ec_read_version(struct udevice *dev, * * @param dev CROS-EC device * @param versionp This is set to point to the build string - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_read_build_info(struct udevice *dev, char **strp);

@@ -413,7 +413,7 @@ int cros_ec_read_build_info(struct udevice *dev, char **strp); * @param dev CROS-EC device * @param index index of the LDO/FET to switch * @param state new state of the LDO/FET : EC_LDO_STATE_ON|OFF - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state);

@@ -423,7 +423,7 @@ int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state); * @param dev CROS-EC device * @param index index of the LDO/FET to switch * @param state current state of the LDO/FET : EC_LDO_STATE_ON|OFF - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state);

@@ -433,7 +433,7 @@ int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state); * This permits delayed reporting of the EC error if it failed during * early init. * - * @return error (0 if there was no error, -ve if there was an error) + * Return: error (0 if there was no error, -ve if there was an error) */ int cros_ec_get_error(void);

@@ -468,7 +468,7 @@ int cros_ec_i2c_tunnel(struct udevice *dev, int port, struct i2c_msg *msg, /** * cros_ec_get_events_b() - Get event mask B * - * @return value of event mask, default value of 0 if it could not be read + * Return: value of event mask, default value of 0 if it could not be read */ uint64_t cros_ec_get_events_b(struct udevice *dev);

@@ -477,7 +477,7 @@ uint64_t cros_ec_get_events_b(struct udevice *dev); * * Any pending events in the B range are cleared * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_clear_events_b(struct udevice *dev, uint64_t mask);

@@ -486,7 +486,7 @@ int cros_ec_clear_events_b(struct udevice *dev, uint64_t mask); * * @param dev CROS-EC device * @param region Flash region to query - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region);

@@ -499,7 +499,7 @@ int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region); * * @param dev CROS-EC device * @param flags Flags to use (EC_BATTERY_CUTOFF_FLAG_...) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_battery_cutoff(struct udevice *dev, uint8_t flags);

@@ -512,7 +512,7 @@ int cros_ec_battery_cutoff(struct udevice *dev, uint8_t flags); * @param dev CROS-EC device * @param index Index of the pwm * @param duty Desired duty cycle, in 0..EC_PWM_MAX_DUTY range. - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_set_pwm_duty(struct udevice *dev, uint8_t index, uint16_t duty);

@@ -524,7 +524,7 @@ int cros_ec_set_pwm_duty(struct udevice *dev, uint8_t index, uint16_t duty); * * @param dev CROS-EC device * @param limit_powerp Returns whether power is limited (0 or 1) - * @return 0 if OK, -ENOSYS if the EC does not support this comment, -EINVAL + * Return: 0 if OK, -ENOSYS if the EC does not support this comment, -EINVAL * if the EC returned an invalid response */ int cros_ec_read_limit_power(struct udevice *dev, int *limit_powerp); @@ -534,7 +534,7 @@ int cros_ec_read_limit_power(struct udevice *dev, int *limit_powerp); * * @param dev CROS-EC device * @param flags Flags to use (EC_POWER_BUTTON_...) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_config_powerbtn(struct udevice *dev, uint32_t flags);

@@ -544,7 +544,7 @@ int cros_ec_config_powerbtn(struct udevice *dev, uint32_t flags); * Determines whether a lid close event is reported * * @param dev CROS-EC device - * @return shufdown mas if OK, -ve on error + * Return: shufdown mas if OK, -ve on error */ int cros_ec_get_lid_shutdown_mask(struct udevice *dev);

@@ -555,7 +555,7 @@ int cros_ec_get_lid_shutdown_mask(struct udevice *dev); * * @param dev CROS-EC device * @param enable true to enable reporting, false to disable - * @return shufdown mas if OK, -ve on error + * Return: shufdown mas if OK, -ve on error */ int cros_ec_set_lid_shutdown_mask(struct udevice *dev, int enable);

@@ -567,7 +567,7 @@ int cros_ec_set_lid_shutdown_mask(struct udevice *dev, int enable); * * @dev: CROS-EC device * @handshakep: If non-NULL, returns received handshake value on error - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_hello(struct udevice *dev, uint *handshakep);

@@ -578,7 +578,7 @@ int cros_ec_hello(struct udevice *dev, uint *handshakep); * * @dev: CROS-EC device * @featuresp: Returns a bitmask of supported features - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_get_features(struct udevice *dev, u64 *featuresp);

@@ -587,7 +587,7 @@ int cros_ec_get_features(struct udevice *dev, u64 *featuresp); * * @dev: CROS-EC device * @feature: Feature number to check (enum ec_feature_code) - * @return true if supported, false if not, -ve on error + * Return: true if supported, false if not, -ve on error */ int cros_ec_check_feature(struct udevice *dev, uint feature);

@@ -595,7 +595,7 @@ int cros_ec_check_feature(struct udevice *dev, uint feature); * cros_ec_get_switches() - Get switches value * * @dev: CROS-EC device - * @return switches value, or -ENOSYS if not supported, or other -ve value on + * Return: switches value, or -ENOSYS if not supported, or other -ve value on * other error */ int cros_ec_get_switches(struct udevice *dev); @@ -604,7 +604,7 @@ int cros_ec_get_switches(struct udevice *dev); * cros_ec_vstore_supported() - Check if vstore is supported * * @dev: CROS-EC device - * @return false if not supported, true if supported, -ve on error + * Return: false if not supported, true if supported, -ve on error */ int cros_ec_vstore_supported(struct udevice *dev);

@@ -613,7 +613,7 @@ int cros_ec_vstore_supported(struct udevice *dev); * * @dev: CROS-EC device * @lockedp: mask of locked slots - * @return number of vstore slots supported by the EC,, -ve on error + * Return: number of vstore slots supported by the EC,, -ve on error */ int cros_ec_vstore_info(struct udevice *dev, u32 *lockedp);

@@ -623,7 +623,7 @@ int cros_ec_vstore_info(struct udevice *dev, u32 *lockedp); * @dev: CROS-EC device * @slot: vstore slot to read from * @data: buffer to store read data, must be EC_VSTORE_SLOT_SIZE bytes - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_vstore_read(struct udevice *dev, int slot, uint8_t *data);

@@ -638,7 +638,7 @@ int cros_ec_vstore_read(struct udevice *dev, int slot, uint8_t *data); * @slot: vstore slot to write into * @data: data to write * @size: size of data in bytes - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int cros_ec_vstore_write(struct udevice *dev, int slot, const uint8_t *data, size_t size); diff --git a/include/crypt.h b/include/crypt.h index f18a1705d4..3301f3b769 100644 --- a/include/crypt.h +++ b/include/crypt.h @@ -9,6 +9,6 @@ * @equal Pointer to an int where the result is stored * '0' = unequal * '1' = equal - * @return 0 on success, error code of errno else + * Return: 0 on success, error code of errno else */ int crypt_compare(const char *should, const char *passphrase, int *equal); diff --git a/include/display.h b/include/display.h index 66294616ea..3d01217644 100644 --- a/include/display.h +++ b/include/display.h @@ -27,7 +27,7 @@ struct display_plat { * display_read_timing() - Read timing information * * @dev: Device to read from - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int display_read_timing(struct udevice *dev, struct display_timing *timing);

@@ -37,7 +37,7 @@ int display_read_timing(struct udevice *dev, struct display_timing *timing); * @dev: Device to enable * @panel_bpp: Number of bits per pixel for panel * @timing: Display timings - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int display_enable(struct udevice *dev, int panel_bpp, const struct display_timing *timing); @@ -45,7 +45,7 @@ int display_enable(struct udevice *dev, int panel_bpp, /** * display_in_use() - Check if a display is in use by any device * - * @return true if the device is in use (display_enable() has been called + * Return: true if the device is in use (display_enable() has been called * successfully), else false */ bool display_in_use(struct udevice *dev); diff --git a/include/display_options.h b/include/display_options.h index 43810cbe22..33fcbb8533 100644 --- a/include/display_options.h +++ b/include/display_options.h @@ -66,7 +66,7 @@ int print_buffer(ulong addr, const void *data, uint width, uint count, * @linelen: Number of values to print per line; specify 0 for default length * @out: Output buffer to hold the dump * @size: Size of output buffer in bytes - * @return number of bytes processed, if OK, -ENOSPC if buffer too small + * Return: number of bytes processed, if OK, -ENOSPC if buffer too small * */ int hexdump_line(ulong addr, const void *data, uint width, uint count, @@ -91,7 +91,7 @@ int display_options(void); * @newlines: true to include two newlines at the start * @buf: place to put string * @size: Size of buf (string is truncated to fit) - * @return buf + * Return: buf */ char *display_options_get_banner(bool newlines, char *buf, int size);

diff --git a/include/dm/acpi.h b/include/dm/acpi.h index 7f1f2ef2cb..0fa239eb3a 100644 --- a/include/dm/acpi.h +++ b/include/dm/acpi.h @@ -139,7 +139,7 @@ struct acpi_ops { * @dev: Device to check * @out_name: Place to put the name, must hold at least ACPI_NAME_MAX * bytes - * @return 0 if OK, -ENOENT if no name is available, other -ve value on + * Return: 0 if OK, -ENOENT if no name is available, other -ve value on * other error */ int acpi_get_name(const struct udevice *dev, char *out_name); @@ -159,7 +159,7 @@ int acpi_get_name(const struct udevice *dev, char *out_name); * * @out_name: Place to put the name * @name: Name to copy - * @return 0 (always) + * Return: 0 (always) */ int acpi_copy_name(char *out_name, const char *name);

@@ -169,7 +169,7 @@ int acpi_copy_name(char *out_name, const char *name); * This scans through all devices and tells them to write any tables they want * to write. * - * @return 0 if OK, -ve if any device returned an error + * Return: 0 if OK, -ve if any device returned an error */ int acpi_write_dev_tables(struct acpi_ctx *ctx);

@@ -179,7 +179,7 @@ int acpi_write_dev_tables(struct acpi_ctx *ctx); * This is called to create the SSDT code for all devices. * * @ctx: ACPI context to use - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_fill_ssdt(struct acpi_ctx *ctx);

@@ -189,7 +189,7 @@ int acpi_fill_ssdt(struct acpi_ctx *ctx); * This is called to create the DSDT code for all devices. * * @ctx: ACPI context to use - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_inject_dsdt(struct acpi_ctx *ctx);

@@ -200,7 +200,7 @@ int acpi_inject_dsdt(struct acpi_ctx *ctx); * * @ctx: ACPI context to use * @nhlt: Pointer to nhlt information to add to - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_setup_nhlt(struct acpi_ctx *ctx, struct nhlt *nhlt);

@@ -223,7 +223,7 @@ void acpi_dump_items(enum acpi_dump_option option); * @dev: Device to check * @out_path: Buffer to place the path in (should be ACPI_PATH_MAX long) * @maxlen: Size of buffer (typically ACPI_PATH_MAX) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int acpi_get_path(const struct udevice *dev, char *out_path, int maxlen);

diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index e6b71cbfd2..02002acb78 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -109,7 +109,7 @@ struct udevice; * @ofnode: Devicetree node for this device. This is ofnode_null() for * devices which don't use devicetree or don't have a node. * @devp: if non-NULL, returns a pointer to the bound device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int device_bind(struct udevice *parent, const struct driver *drv, const char *name, void *plat, ofnode node, @@ -132,7 +132,7 @@ int device_bind(struct udevice *parent, const struct driver *drv, * @node: Device tree node for this device. This is invalid for devices which * don't use device tree. * @devp: if non-NULL, returns a pointer to the bound device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int device_bind_with_driver_data(struct udevice *parent, const struct driver *drv, const char *name, @@ -149,7 +149,7 @@ int device_bind_with_driver_data(struct udevice *parent, * is set. If false bind the driver always. * @info: Name and plat for this device * @devp: if non-NULL, returns a pointer to the bound device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int device_bind_by_name(struct udevice *parent, bool pre_reloc_only, const struct driver_info *info, struct udevice **devp); @@ -159,7 +159,7 @@ int device_bind_by_name(struct udevice *parent, bool pre_reloc_only, * * @dev: pointer to device to be reparented * @new_parent: pointer to new parent device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int device_reparent(struct udevice *dev, struct udevice *new_parent);

@@ -175,7 +175,7 @@ int device_reparent(struct udevice *dev, struct udevice *new_parent); * All private data associated with the device is allocated. * * @dev: Pointer to device to process - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int device_of_to_plat(struct udevice *dev);

@@ -186,7 +186,7 @@ int device_of_to_plat(struct udevice *dev); * first. * * @dev: Pointer to device to probe - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int device_probe(struct udevice *dev);

@@ -198,7 +198,7 @@ int device_probe(struct udevice *dev); * * @dev: Pointer to device to remove * @flags: Flags for selective device removal (DM_REMOVE_...) - * @return 0 if OK, -EKEYREJECTED if not removed due to flags, -EPROBE_DEFER if + * Return: 0 if OK, -EKEYREJECTED if not removed due to flags, -EPROBE_DEFER if * this is a vital device and flags is DM_REMOVE_NON_VITAL, other -ve on * error (such an error here is normally a very bad thing) */ @@ -214,7 +214,7 @@ static inline int device_remove(struct udevice *dev, uint flags) { return 0; } * Unbind a device and remove all memory used by it * * @dev: Pointer to device to unbind - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int device_unbind(struct udevice *dev); @@ -237,7 +237,7 @@ static inline void device_free(struct udevice *dev) {} * * @dev: The device that is to be stripped of its children * @drv: The targeted driver - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int device_chld_unbind(struct udevice *dev, struct driver *drv); @@ -261,7 +261,7 @@ static inline int device_chld_unbind(struct udevice *dev, struct driver *drv) * @dev: The device whose children are to be removed * @drv: The targeted driver * @flags: Flag, if this functions is called in the pre-OS stage - * @return 0 on success, -EPROBE_DEFER if any child failed to remove, other + * Return: 0 on success, -EPROBE_DEFER if any child failed to remove, other * -ve on error */ #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) @@ -385,7 +385,7 @@ void dev_set_uclass_plat(struct udevice *dev, void *uclass_plat); * * @dev: Simple bus device (parent of target device) * @addr: Address to translate - * @return new address + * Return: new address */ fdt_addr_t simple_bus_translate(struct udevice *dev, fdt_addr_t addr);

diff --git a/include/dm/pci.h b/include/dm/pci.h index bddacbf599..d35d24d959 100644 --- a/include/dm/pci.h +++ b/include/dm/pci.h @@ -16,7 +16,7 @@ struct udevice; * This returns an int to avoid a dependency on pci.h * * @dev: PCI device - * @return devfn in bits 15...8 if found (pci_dev_t format), or -ENODEV if not + * Return: devfn in bits 15...8 if found (pci_dev_t format), or -ENODEV if not * found */ int pci_get_devfn(struct udevice *dev); @@ -33,7 +33,7 @@ int pci_get_devfn(struct udevice *dev); * @reg: reg value from dt-plat.c array (first member). This is not a * pointer type, since the caller may use fdt32_t or fdt64_t depending on * the address sizes. - * @return device/function for that device (pci_dev_t format) + * Return: device/function for that device (pci_dev_t format) */ static inline int pci_ofplat_get_devfn(u32 reg) { diff --git a/include/dm/test.h b/include/dm/test.h index a9562b2bfc..4919064cc0 100644 --- a/include/dm/test.h +++ b/include/dm/test.h @@ -26,7 +26,7 @@ struct dm_test_pdata { * @dev: Device to operate on * @pingval: Value to ping the device with * @pingret: Returns resulting value from driver - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ struct test_ops { int (*ping)(struct udevice *dev, int pingval, int *pingret); @@ -189,7 +189,7 @@ int testfdt_ping(struct udevice *dev, int pingval, int *pingret); * @dev: Device to test * @base: Base address, used to check ping return value * @priv: Pointer to private test information - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_check_operations(struct unit_test_state *uts, struct udevice *dev, uint32_t base, struct dm_test_priv *priv); @@ -199,7 +199,7 @@ int dm_check_operations(struct unit_test_state *uts, struct udevice *dev, * * @dms: Overall test state * @num_devices: Number of test devices to check - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_check_devices(struct unit_test_state *uts, int num_devices);

diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h index fb0edcc296..e71b86a973 100644 --- a/include/dm/uclass-internal.h +++ b/include/dm/uclass-internal.h @@ -89,7 +89,7 @@ void uclass_set_priv(struct uclass *uc, void *priv); * This allows assigning the sequence number in the binding order. * * @uc: uclass to check - * @return The next free sequence number + * Return: The next free sequence number */ int uclass_find_next_free_seq(struct uclass *uc);

@@ -101,7 +101,7 @@ int uclass_find_next_free_seq(struct uclass *uc); * @dev: Device that needs to be probed * @ret: Error to return. If non-zero then the device is not probed * @devp: Returns the value of 'dev' if there is no error - * @return ret, if non-zero, else the result of the device_probe() call + * Return: ret, if non-zero, else the result of the device_probe() call */ int uclass_get_device_tail(struct udevice *dev, int ret, struct udevice **devp);

@@ -112,7 +112,7 @@ int uclass_get_device_tail(struct udevice *dev, int ret, struct udevice **devp); * * The device is not prepared for use - this is an internal function. * - * @return the index of the device in the uclass list or -ENODEV if not found. + * Return: the index of the device in the uclass list or -ENODEV if not found. */ int dev_get_uclass_index(struct udevice *dev, struct uclass **ucp);

@@ -125,7 +125,7 @@ int dev_get_uclass_index(struct udevice *dev, struct uclass **ucp); * The device is not prepared for use - this is an internal function. * The function uclass_get_device_tail() can be used to probe the device. * - * @return the uclass pointer of a child at the given index or + * Return: the uclass pointer of a child at the given index or * return NULL on error. */ int uclass_find_device(enum uclass_id id, int index, struct udevice **devp); @@ -138,7 +138,7 @@ int uclass_find_device(enum uclass_id id, int index, struct udevice **devp); * The device is not prepared for use - this is an internal function. * The function uclass_get_device_tail() can be used to probe the device. * - * @return 0 if OK (found or not found), -ve on error + * Return: 0 if OK (found or not found), -ve on error */ int uclass_find_first_device(enum uclass_id id, struct udevice **devp);

@@ -150,7 +150,7 @@ int uclass_find_first_device(enum uclass_id id, struct udevice **devp); * The device is not prepared for use - this is an internal function. * The function uclass_get_device_tail() can be used to probe the device. * - * @return 0 if OK (found or not found), -ve on error + * Return: 0 if OK (found or not found), -ve on error */ int uclass_find_next_device(struct udevice **devp);

@@ -164,7 +164,7 @@ int uclass_find_next_device(struct udevice **devp); * @id: ID to look up * @name: name of a device to find * @devp: Returns pointer to device (the first one with the name) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int uclass_find_device_by_name(enum uclass_id id, const char *name, struct udevice **devp); @@ -179,7 +179,7 @@ int uclass_find_device_by_name(enum uclass_id id, const char *name, * @id: ID to look up * @seq: Sequence number to find (0=first) * @devp: Returns pointer to device (there is only one per for each seq) - * @return 0 if OK, -ENODEV if not found + * Return: 0 if OK, -ENODEV if not found */ int uclass_find_device_by_seq(enum uclass_id id, int seq, struct udevice **devp); @@ -195,7 +195,7 @@ int uclass_find_device_by_seq(enum uclass_id id, int seq, * @id: ID to look up * @node: Device tree offset to search for (if -ve then -ENODEV is returned) * @devp: Returns pointer to device (there is only one for each node) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int uclass_find_device_by_of_offset(enum uclass_id id, int node, struct udevice **devp); @@ -211,7 +211,7 @@ int uclass_find_device_by_of_offset(enum uclass_id id, int node, * @id: ID to look up * @node: Device tree offset to search for (if NULL then -ENODEV is returned) * @devp: Returns pointer to device (there is only one for each node) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int uclass_find_device_by_ofnode(enum uclass_id id, ofnode node, struct udevice **devp); @@ -227,7 +227,7 @@ int uclass_find_device_by_ofnode(enum uclass_id id, ofnode node, * @parent: Parent device containing the phandle pointer * @name: Name of property in the parent device node * @devp: Returns pointer to device (there is only one for each node) - * @return 0 if OK, -ENOENT if there is no @name present in the node, other + * Return: 0 if OK, -ENOENT if there is no @name present in the node, other * -ve on error */ int uclass_find_device_by_phandle(enum uclass_id id, struct udevice *parent, @@ -317,7 +317,7 @@ int uclass_get_count(void); * uclass_find() - Find uclass by its id * * @id: Id to serach for - * @return pointer to uclass, or NULL if not found + * Return: pointer to uclass, or NULL if not found */ struct uclass *uclass_find(enum uclass_id key);

@@ -327,7 +327,7 @@ struct uclass *uclass_find(enum uclass_id key); * Destroy a uclass and all its devices * * @uc: uclass to destroy - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int uclass_destroy(struct uclass *uc);

diff --git a/include/dm/util.h b/include/dm/util.h index 17baf55c25..4428f045b7 100644 --- a/include/dm/util.h +++ b/include/dm/util.h @@ -20,7 +20,7 @@ struct list_head; * list_count_items() - Count number of items in a list * * @param head: Head of list - * @return number of items, or 0 if empty + * Return: number of items, or 0 if empty */ int list_count_items(struct list_head *head);

diff --git a/include/dma.h b/include/dma.h index a64580a61f..9b39221227 100644 --- a/include/dma.h +++ b/include/dma.h @@ -179,7 +179,7 @@ struct dma { * @index: The index of the DMA to request, within the client's list of * DMA channels. * @dma: A pointer to a DMA struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int dma_get_by_index(struct udevice *dev, int index, struct dma *dma);

@@ -196,7 +196,7 @@ int dma_get_by_index(struct udevice *dev, int index, struct dma *dma); * @name: The name of the DMA to request, within the client's list of * DMA channels. * @dma: A pointer to a DMA struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int dma_get_by_name(struct udevice *dev, const char *name, struct dma *dma); # else @@ -225,7 +225,7 @@ static inline int dma_get_by_name(struct udevice *dev, const char *name, * @dma: A pointer to a DMA struct to initialize. The caller must * have already initialized any field in this struct which the * DMA provider uses to identify the DMA channel. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int dma_request(struct udevice *dev, struct dma *dma);

@@ -234,7 +234,7 @@ int dma_request(struct udevice *dev, struct dma *dma); * * @dma: A DMA struct that was previously successfully requested by * dma_request/get_by_*(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int dma_free(struct dma *dma);

@@ -243,7 +243,7 @@ int dma_free(struct dma *dma); * * @dma: A DMA struct that was previously successfully requested by * dma_request/get_by_*(). - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int dma_enable(struct dma *dma);

@@ -252,7 +252,7 @@ int dma_enable(struct dma *dma); * * @dma: A DMA struct that was previously successfully requested by * dma_request/get_by_*(). - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int dma_disable(struct dma *dma);

@@ -266,7 +266,7 @@ int dma_disable(struct dma *dma); * dma_request/get_by_*(). * @dst: The receive buffer pointer. * @size: The receive buffer size - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int dma_prepare_rcv_buf(struct dma *dma, void *dst, size_t size);

@@ -277,7 +277,7 @@ int dma_prepare_rcv_buf(struct dma *dma, void *dst, size_t size); * dma_request/get_by_*(). * @dst: The destination pointer. * @metadata: DMA driver's channel specific data - * @return length of received data on success, or zero - no data, + * Return: length of received data on success, or zero - no data, * or -ve error code. */ int dma_receive(struct dma *dma, void **dst, void *metadata); @@ -290,7 +290,7 @@ int dma_receive(struct dma *dma, void **dst, void *metadata); * @src: The source pointer. * @len: Length of the data to be sent (number of bytes). * @metadata: DMA driver's channel specific data - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int dma_send(struct dma *dma, void *src, size_t len, void *metadata);

@@ -302,7 +302,7 @@ int dma_send(struct dma *dma, void *src, size_t len, void *metadata); * configuration data client needs * @cfg_data: Pointer to store pointer to DMA driver specific * configuration data for the given cfg_id (output param) - * @return zero on success, or -ve error code. + * Return: zero on success, or -ve error code. */ int dma_get_cfg(struct dma *dma, u32 cfg_id, void **cfg_data); #endif /* CONFIG_DMA_CHANNELS */ @@ -315,7 +315,7 @@ int dma_get_cfg(struct dma *dma, u32 cfg_id, void **cfg_data); * @transfer_type - transfer type should be one/multiple of * DMA_SUPPORTS_* * @devp - udevice pointer to return the found device - * @return - will return on success and devp will hold the + * Return: - will return on success and devp will hold the * pointer to the device */ int dma_get_device(u32 transfer_type, struct udevice **devp); @@ -327,7 +327,7 @@ int dma_get_device(u32 transfer_type, struct udevice **devp); * @dst - destination pointer * @src - souce pointer * @len - data length to be copied - * @return - on successful transfer returns no of bytes + * Return: - on successful transfer returns no of bytes transferred and on failure return error code. */ int dma_memcpy(void *dst, void *src, size_t len); diff --git a/include/dsi_host.h b/include/dsi_host.h index 9dfc7b3687..83f8839db6 100644 --- a/include/dsi_host.h +++ b/include/dsi_host.h @@ -54,7 +54,7 @@ struct dsi_host_ops { * @timing: Display timings * @max_data_lanes: maximum number of data lines * @phy_ops: set of function pointers for performing physical operations - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dsi_host_init(struct udevice *dev, struct mipi_dsi_device *device, @@ -66,7 +66,7 @@ int dsi_host_init(struct udevice *dev, * dsi_host_enable * * @dev: dsi host device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dsi_host_enable(struct udevice *dev);

diff --git a/include/dwmmc.h b/include/dwmmc.h index 5fc8ed8395..136a95b8cd 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -284,7 +284,7 @@ void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host, * @cfg: Empty configuration structure (generally &plat->cfg). This is * normally all zeroes at this point. The only purpose of passing * this in is to set mmc->cfg to it. - * @return 0 if OK, -ve if the block device could not be created + * Return: 0 if OK, -ve if the block device could not be created */ int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);

@@ -297,7 +297,7 @@ int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); * @host: DWMMC host structure * @max_clk: Maximum supported clock speed in HZ (e.g. 150000000) * @min_clk: Minimum supported clock speed in HZ (e.g. 400000) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); #endif /* !CONFIG_BLK */ diff --git a/include/edid.h b/include/edid.h index 2562733061..cee7c4c763 100644 --- a/include/edid.h +++ b/include/edid.h @@ -277,7 +277,7 @@ void edid_print_info(struct edid1_info *edid_info); * Check the EDID info. * * @param info The EDID info to be checked - * @return 0 on valid, or -1 on invalid + * Return: 0 on valid, or -1 on invalid */ int edid_check_info(struct edid1_info *info);

@@ -286,7 +286,7 @@ int edid_check_info(struct edid1_info *info); * * @param edid_block EDID block data * - * @return 0 on success, or a negative errno on error + * Return: 0 on success, or a negative errno on error */ int edid_check_checksum(u8 *edid_block);

@@ -298,7 +298,7 @@ int edid_check_checksum(u8 *edid_block); * @param hmax Returns the maxium horizontal rate * @param vmin Returns the minimum vertical rate * @param vmax Returns the maxium vertical rate - * @return 0 on success, or -1 on error + * Return: 0 on success, or -1 on error */ int edid_get_ranges(struct edid1_info *edid, unsigned int *hmin, unsigned int *hmax, unsigned int *vmin, @@ -319,7 +319,7 @@ struct display_timing; * @param mode_valid Callback validating mode, returning true is mode is * supported, false otherwise. * @parem valid_priv Pointer to private data for mode_valid callback - * @return 0 if timings are OK, -ve on error + * Return: 0 if timings are OK, -ve on error */ int edid_get_timing_validate(u8 *buf, int buf_size, struct display_timing *timing, @@ -337,7 +337,7 @@ int edid_get_timing_validate(u8 *buf, int buf_size, * @param panel_bits_per_colourp Place to put the number of bits per * colour supported by the panel. This will be set to * -1 if not available - * @return 0 if timings are OK, -ve on error + * Return: 0 if timings are OK, -ve on error */ int edid_get_timing(u8 *buf, int buf_size, struct display_timing *timing, int *panel_bits_per_colourp); diff --git a/include/efi_loader.h b/include/efi_loader.h index f20d361876..701efcd2b6 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -553,7 +553,7 @@ void efi_initrd_deregister(void); * * Called by bootefi to make ACPI tables available * - * @return 0 if OK, -ENOMEM if no memory is available for the tables + * Return: 0 if OK, -ENOMEM if no memory is available for the tables */ efi_status_t efi_acpi_register(void); /** @@ -561,7 +561,7 @@ efi_status_t efi_acpi_register(void); * * Called by bootefi to make SMBIOS tables available * - * @return 0 if OK, -ENOMEM if no memory is available for the tables + * Return: 0 if OK, -ENOMEM if no memory is available for the tables */ efi_status_t efi_smbios_register(void);

@@ -976,7 +976,7 @@ efi_status_t efi_capsule_authenticate(const void *capsule, /** * Install the ESRT system table. * - * @return status code + * Return: status code */ efi_status_t efi_esrt_register(void);

diff --git a/include/env.h b/include/env.h index ff8943ed96..60acb5454e 100644 --- a/include/env.h +++ b/include/env.h @@ -68,7 +68,7 @@ enum env_redund_flags { * This value increments every time the environment changes, so can be used an * an indication of this * - * @return environment ID + * Return: environment ID */ int env_get_id(void);

@@ -78,7 +78,7 @@ int env_get_id(void); * This locates the environment or uses the default if nothing is available. * This must be called before env_get() will work. * - * @return 0 if OK, -ENODEV if no environment drivers are enabled + * Return: 0 if OK, -ENODEV if no environment drivers are enabled */ int env_init(void);

@@ -98,7 +98,7 @@ void env_relocate(void); * case this function calls env_get_f(). * * @varname: Variable to look up - * @return value of variable, or NULL if not found + * Return: value of variable, or NULL if not found */ char *env_get(const char *varname);

@@ -108,7 +108,7 @@ char *env_get(const char *varname); * place of env_get without changing error handling otherwise. * * @varname: Variable to look up - * @return value of variable, or NULL if not found + * Return: value of variable, or NULL if not found */ char *from_env(const char *envvar);

@@ -120,7 +120,7 @@ char *from_env(const char *envvar); * support reading the value (slowly) and some will not. * * @varname: Variable to look up - * @return actual length of the variable value excluding the terminating + * Return: actual length of the variable value excluding the terminating * NULL-byte, or -1 if the variable is not found */ int env_get_f(const char *name, char *buf, unsigned int len); @@ -128,7 +128,7 @@ int env_get_f(const char *name, char *buf, unsigned int len); /** * env_get_yesno() - Read an environment variable as a boolean * - * @return 1 if yes/true (Y/y/T/t), -1 if variable does not exist (i.e. default + * Return: 1 if yes/true (Y/y/T/t), -1 if variable does not exist (i.e. default * to true), 0 if otherwise */ int env_get_yesno(const char *var); @@ -136,7 +136,7 @@ int env_get_yesno(const char *var); /** * env_get_autostart() - Check if autostart is enabled * - * @return true if the "autostart" env var exists and is set to "yes" + * Return: true if the "autostart" env var exists and is set to "yes" */ bool env_get_autostart(void);

@@ -148,7 +148,7 @@ bool env_get_autostart(void); * * @varname: Variable to adjust * @value: Value to set for the variable, or NULL or "" to delete the variable - * @return 0 if OK, 1 on error + * Return: 0 if OK, 1 on error */ int env_set(const char *varname, const char *value);

@@ -161,7 +161,7 @@ int env_set(const char *varname, const char *value); * @name: Variable to look up * @base: Base to use (e.g. 10 for base 10, 2 for binary) * @default_val: Default value to return if no value is found - * @return the value found, or @default_val if none + * Return: the value found, or @default_val if none */ ulong env_get_ulong(const char *name, int base, ulong default_val);

@@ -170,7 +170,7 @@ ulong env_get_ulong(const char *name, int base, ulong default_val); * * @varname: Variable to adjust * @value: Value to set for the variable (will be converted to a string) - * @return 0 if OK, 1 on error + * Return: 0 if OK, 1 on error */ int env_set_ulong(const char *varname, ulong value);

@@ -191,7 +191,7 @@ ulong env_get_hex(const char *varname, ulong default_val); * * @varname: Variable to adjust * @value: Value to set for the variable (will be converted to a hex string) - * @return 0 if OK, 1 on error + * Return: 0 if OK, 1 on error */ int env_set_hex(const char *varname, ulong value);

@@ -200,7 +200,7 @@ int env_set_hex(const char *varname, ulong value); * * @varname: Environment variable to set * @addr: Value to set it to - * @return 0 if ok, 1 on error + * Return: 0 if ok, 1 on error */ static inline int env_set_addr(const char *varname, const void *addr) { @@ -216,7 +216,7 @@ static inline int env_set_addr(const char *varname, const void *addr) * @maxsz: Size of buffer to use for matches * @buf: Buffer to use for matches * @dollar_comp: non-zero to wrap each match in ${...} - * @return number of matches found (in @cmdv) + * Return: number of matches found (in @cmdv) */ int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf, bool dollar_comp); @@ -226,7 +226,7 @@ int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf, * * @name: Environment variable to get (e.g. "ethaddr") * @enetaddr: Place to put MAC address (6 bytes) - * @return 0 if OK, 1 on error + * Return: 0 if OK, 1 on error */ int eth_env_get_enetaddr(const char *name, uint8_t *enetaddr);

@@ -235,7 +235,7 @@ int eth_env_get_enetaddr(const char *name, uint8_t *enetaddr); * * @name: Environment variable to set (e.g. "ethaddr") * @enetaddr: Pointer to MAC address to put into the variable (6 bytes) - * @return 0 if OK, 1 on error + * Return: 0 if OK, 1 on error */ int eth_env_set_enetaddr(const char *name, const uint8_t *enetaddr);

@@ -258,35 +258,35 @@ int env_set_default_vars(int nvars, char *const vars[], int flags); /** * env_load() - Load the environment from storage * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int env_load(void);

/** * env_reload() - Re-Load the environment from current storage * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int env_reload(void);

/** * env_save() - Save the environment to storage * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int env_save(void);

/** * env_erase() - Erase the environment on storage * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int env_erase(void);

/** * env_select() - Select the environment storage * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int env_select(const char *name);

@@ -300,7 +300,7 @@ int env_select(const char *name); * @check: non-zero to check the CRC at the start of the environment, 0 to * ignore it * @flags: Flags controlling matching (H_... - see search.h) - * @return 0 if imported successfully, -ENOMSG if the CRC was bad, -EIO if + * Return: 0 if imported successfully, -ENOMSG if the CRC was bad, -EIO if * something else went wrong */ int env_import(const char *buf, int check, int flags); @@ -311,7 +311,7 @@ int env_import(const char *buf, int check, int flags); * Export from hash table into binary representation * * @env_out: Buffer to contain the environment (must be large enough!) - * @return 0 if OK, 1 on error + * Return: 0 if OK, 1 on error */ int env_export(struct environment_s *env_out);

@@ -323,7 +323,7 @@ int env_export(struct environment_s *env_out); * @buf1_read_fail: 0 if buf1 is valid, non-zero if invalid * @buf2: Second environment (struct environemnt_s *) * @buf2_read_fail: 0 if buf2 is valid, non-zero if invalid - * @return 0 if OK, + * Return: 0 if OK, * -EIO if no environment is valid, * -ENOMSG if the CRC was bad */ @@ -339,7 +339,7 @@ int env_check_redund(const char *buf1, int buf1_read_fail, * @buf2: Second environment (struct environemnt_s *) * @buf2_read_fail: 0 if buf2 is valid, non-zero if invalid * @flags: Flags controlling matching (H_... - see search.h) - * @return 0 if OK, -EIO if no environment is valid, -ENOMSG if the CRC was bad + * Return: 0 if OK, -EIO if no environment is valid, -ENOMSG if the CRC was bad */ int env_import_redund(const char *buf1, int buf1_read_fail, const char *buf2, int buf2_read_fail, @@ -349,7 +349,7 @@ int env_import_redund(const char *buf1, int buf1_read_fail, * env_get_default() - Look up a variable from the default environment * * @name: Variable to look up - * @return value if found, NULL if not found in default environment + * Return: value if found, NULL if not found in default environment */ char *env_get_default(const char *name);

diff --git a/include/env_internal.h b/include/env_internal.h index 174c3b1a79..07c227ecc0 100644 --- a/include/env_internal.h +++ b/include/env_internal.h @@ -220,7 +220,7 @@ extern struct hsearch_data env_htab; * It is a weak function allowing board to overidde the default interface for * U-Boot env in EXT4: CONFIG_ENV_EXT4_INTERFACE * - * @return string of interface, empty if not supported + * Return: string of interface, empty if not supported */ const char *env_ext4_get_intf(void);

@@ -230,7 +230,7 @@ const char *env_ext4_get_intf(void); * It is a weak function allowing board to overidde the default device and * partition used for U-Boot env in EXT4: CONFIG_ENV_EXT4_DEVICE_AND_PART * - * @return string of device and partition + * Return: string of device and partition */ const char *env_ext4_get_dev_part(void);

@@ -242,7 +242,7 @@ const char *env_ext4_get_dev_part(void); * @op: operations performed on the environment * @prio: priority between the multiple environments, 0 being the * highest priority - * @return an enum env_location value on success, or -ve error code. + * Return: an enum env_location value on success, or -ve error code. */ enum env_location env_get_location(enum env_operation op, int prio); #endif /* DO_DEPS_ONLY */ diff --git a/include/extension_board.h b/include/extension_board.h index c530a0ad8a..3b75b5ba9f 100644 --- a/include/extension_board.h +++ b/include/extension_board.h @@ -19,7 +19,7 @@ struct extension { /** * extension_board_scan - Add system-specific function to scan extension board. * @param extension_list List of extension board information to update. - * @return the number of extension. + * Return: the number of extension. * * This function is called if CONFIG_CMD_EXTENSION is defined. * Needs to fill the list extension_list with elements. diff --git a/include/fdt_region.h b/include/fdt_region.h index d0c68760f7..b4930df22e 100644 --- a/include/fdt_region.h +++ b/include/fdt_region.h @@ -131,7 +131,7 @@ struct fdt_region_state { * @path_len: Length of path, must be large enough to hold the longest * path in the tree * @add_string_tab: 1 to add a region for the string table - * @return number of regions in list. If this is >max_regions then the + * Return: number of regions in list. If this is >max_regions then the * region array was exhausted. You should increase max_regions and try * the call again. */ @@ -232,7 +232,7 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count, * @data: Pointer to data (node name, property name, compatible * string, value (not yet supported) * @size: Size of data, or 0 if none - * @return 0 to exclude, 1 to include, -1 if no information is + * Return: 0 to exclude, 1 to include, -1 if no information is * available * @priv: Private pointer passed to h_include * @region: Returns list of regions, sorted by offset @@ -243,7 +243,7 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count, * path in the tree * @flags: Various flags that control the region algortihm, see * FDT_REG_... - * @return number of regions in list. If this is >max_regions then the + * Return: number of regions in list. If this is >max_regions then the * region array was exhausted. You should increase max_regions and try * the call again. Only the first max_regions elements are available in the * array. @@ -295,7 +295,7 @@ int fdt_next_region(const void *fdt, * @count: Number of regions * @max_regions: Number of entries that can fit in @region * @info: Region state as returned from fdt_next_region() - * @return new number of regions in @region (i.e. count + the number added) + * Return: new number of regions in @region (i.e. count + the number added) * or -FDT_ERR_NOSPACE if there was not enough space. */ int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, diff --git a/include/fdt_support.h b/include/fdt_support.h index 8ec461af6c..e7cd4aa548 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -18,7 +18,7 @@ * Defined in arch/$(ARCH)/lib/bootm-fdt.c * * @blob: FDT blob to write to - * @return 0 if ok, or -ve FDT_ERR_... on failure + * Return: 0 if ok, or -ve FDT_ERR_... on failure */ int arch_fixup_fdt(void *blob);

@@ -37,7 +37,7 @@ u32 fdt_getprop_u32_default(const void *fdt, const char *path, * See doc/device-tree-bindings/root.txt * * @param fdt FDT address in memory - * @return 0 if ok, or -FDT_ERR_... on error + * Return: 0 if ok, or -FDT_ERR_... on error */ int fdt_root(void *fdt);

@@ -47,7 +47,7 @@ int fdt_root(void *fdt); * In particular, this adds the kernel command line (bootargs) to the FDT. * * @param fdt FDT address in memory - * @return 0 if ok, or -FDT_ERR_... on error + * Return: 0 if ok, or -FDT_ERR_... on error */ int fdt_chosen(void *fdt);

@@ -55,7 +55,7 @@ int fdt_chosen(void *fdt); * Add initrd information to the FDT before booting the OS. * * @param fdt FDT address in memory - * @return 0 if ok, or -FDT_ERR_... on error + * Return: 0 if ok, or -FDT_ERR_... on error */ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);

@@ -89,7 +89,7 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat, * @param blob FDT blob to update * @param start Begin of DRAM mapping in physical memory * @param size Size of the single memory bank - * @return 0 if ok, or -1 or -FDT_ERR_... on error + * Return: 0 if ok, or -1 or -FDT_ERR_... on error */ int fdt_fixup_memory(void *blob, u64 start, u64 size);

@@ -105,7 +105,7 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size); * @param size Array of size <banks> to hold the size of each region. * @param banks Number of memory banks to create. If 0, the reg * property will be left untouched. - * @return 0 if ok, or -1 or -FDT_ERR_... on error + * Return: 0 if ok, or -1 or -FDT_ERR_... on error */ #ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); @@ -132,7 +132,7 @@ void fdt_fixup_qe_firmware(void *fdt); * @param blob FDT blob to update * @param path path within dt * @param display name of display timing to match - * @return 0 if ok, or -FDT_ERR_... on error + * Return: 0 if ok, or -FDT_ERR_... on error */ int fdt_fixup_display(void *blob, const char *path, const char *display);

@@ -161,7 +161,7 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} * @param type type (if specified, otherwise pass NULL) * @param os os-type (if specified, otherwise pass NULL) * @param arch architecture (if specified, otherwise pass NULL) - * @return 0 if ok, or -1 or -FDT_ERR_... on error + * Return: 0 if ok, or -1 or -FDT_ERR_... on error */ int fdt_record_loadable(void *blob, u32 index, const char *name, uintptr_t load_addr, u32 size, uintptr_t entry_point, @@ -182,7 +182,7 @@ int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name); * * @param blob FDT blob to update * @param bd Pointer to board data - * @return 0 if ok, or -FDT_ERR_... on error + * Return: 0 if ok, or -FDT_ERR_... on error */ int ft_board_setup(void *blob, struct bd_info *bd);

@@ -212,7 +212,7 @@ void ft_board_setup_ex(void *blob, struct bd_info *bd); * * @param blob FDT blob to update * @param bd Pointer to board data - * @return 0 if ok, or -FDT_ERR_... on error + * Return: 0 if ok, or -FDT_ERR_... on error */ int ft_system_setup(void *blob, struct bd_info *bd);

@@ -223,7 +223,7 @@ void set_working_fdt_addr(ulong addr); * * @param blob FDT blob to update * @param extrasize additional bytes needed - * @return 0 if ok, or -FDT_ERR_... on error + * Return: 0 if ok, or -FDT_ERR_... on error */ int fdt_shrink_to_minimum(void *blob, uint extrasize); int fdt_increase_size(void *fdt, int add_len); @@ -254,7 +254,7 @@ void fdt_del_node_and_alias(void *blob, const char *alias); * @param blob Pointer to device tree blob * @param node_offset Node DT offset * @param in_addr Pointer to the address to translate - * @return translated address or OF_BAD_ADDR on error + * Return: translated address or OF_BAD_ADDR on error */ u64 fdt_translate_address(const void *blob, int node_offset, const __be32 *in_addr); @@ -266,7 +266,7 @@ u64 fdt_translate_address(const void *blob, int node_offset, * @param blob Pointer to device tree blob * @param node_offset Node DT offset * @param in_addr Pointer to the DMA address to translate - * @return translated DMA address or OF_BAD_ADDR on error + * Return: translated DMA address or OF_BAD_ADDR on error */ u64 fdt_translate_dma_address(const void *blob, int node_offset, const __be32 *in_addr); @@ -280,7 +280,7 @@ u64 fdt_translate_dma_address(const void *blob, int node_offset, * @param cpu Pointer to variable storing the range's cpu address * @param bus Pointer to variable storing the range's bus address * @param size Pointer to variable storing the range's size - * @return translated DMA address or OF_BAD_ADDR on error + * Return: translated DMA address or OF_BAD_ADDR on error */ int fdt_get_dma_range(const void *blob, int node_offset, phys_addr_t *cpu, dma_addr_t *bus, u64 *size); @@ -403,7 +403,7 @@ int fdtdec_get_int(const void *blob, int node, const char *prop_name, * * @param blob FDT blob * @param node parent node - * @return number of child node; 0 if there is not child node + * Return: number of child node; 0 if there is not child node */ int fdtdec_get_child_count(const void *blob, int node); #endif diff --git a/include/fdtdec.h b/include/fdtdec.h index 15f2d2bbba..9a7b6a7ee1 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -148,7 +148,7 @@ static inline u8 *dtb_dt_embedded(void) * Compute the size of a resource. * * @param res the resource to operate on - * @return the size of the resource + * Return: the size of the resource */ static inline fdt_size_t fdt_resource_size(const struct fdt_resource *res) { @@ -241,7 +241,7 @@ struct fdtdec_phandle_args { * @cells_count: Cell count to use if @cells_name is NULL * @index: index of a phandle to parse out * @out_args: optional pointer to output arguments structure (will be filled) - * @return 0 on success (with @out_args filled out if not NULL), -ENOENT if + * Return: 0 on success (with @out_args filled out if not NULL), -ENOENT if * @list_name does not exist, a phandle was not found, @cells_name * could not be found, the arguments were truncated or there were too * many arguments. @@ -268,7 +268,7 @@ int fdtdec_parse_phandle_with_args(const void *blob, int src_node, * @param blob FDT blob to use * @param name Root name of alias to search for * @param id Compatible ID to look for - * @return offset of next compatible node, or -FDT_ERR_NOTFOUND if no more + * Return: offset of next compatible node, or -FDT_ERR_NOTFOUND if no more */ int fdtdec_next_alias(const void *blob, const char *name, enum fdt_compat_id id, int *upto); @@ -282,7 +282,7 @@ int fdtdec_next_alias(const void *blob, const char *name, * * @param blob FDT blob to use * @param node Node containing compatible string to find - * @return compatible ID, or COMPAT_UNKNOWN if we cannot find a match + * Return: compatible ID, or COMPAT_UNKNOWN if we cannot find a match */ enum fdt_compat_id fdtdec_lookup(const void *blob, int node);

@@ -296,7 +296,7 @@ enum fdt_compat_id fdtdec_lookup(const void *blob, int node); * @param blob FDT blob to use * @param node Start node for search * @param id Compatible ID to look for (enum fdt_compat_id) - * @return offset of next compatible node, or -FDT_ERR_NOTFOUND if no more + * Return: offset of next compatible node, or -FDT_ERR_NOTFOUND if no more */ int fdtdec_next_compatible(const void *blob, int node, enum fdt_compat_id id); @@ -313,7 +313,7 @@ int fdtdec_next_compatible(const void *blob, int node, * @param node Start node for search * @param id Compatible ID to look for (enum fdt_compat_id) * @param depthp Current depth (set to 0 before first call) - * @return offset of next compatible node, or -FDT_ERR_NOTFOUND if no more + * Return: offset of next compatible node, or -FDT_ERR_NOTFOUND if no more */ int fdtdec_next_compatible_subnode(const void *blob, int node, enum fdt_compat_id id, int *depthp); @@ -339,7 +339,7 @@ int fdtdec_next_compatible_subnode(const void *blob, int node, * @param sizep a pointer to store the size into. Use NULL if not required * @param translate Indicates whether to translate the returned value * using the parent node's ranges property. - * @return address, if found, or FDT_ADDR_T_NONE if not + * Return: address, if found, or FDT_ADDR_T_NONE if not */ fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob, int node, const char *prop_name, int index, int na, int ns, @@ -361,7 +361,7 @@ fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob, int node, * @param sizep a pointer to store the size into. Use NULL if not required * @param translate Indicates whether to translate the returned value * using the parent node's ranges property. - * @return address, if found, or FDT_ADDR_T_NONE if not + * Return: address, if found, or FDT_ADDR_T_NONE if not */ fdt_addr_t fdtdec_get_addr_size_auto_parent(const void *blob, int parent, int node, const char *prop_name, int index, fdt_size_t *sizep, @@ -387,7 +387,7 @@ fdt_addr_t fdtdec_get_addr_size_auto_parent(const void *blob, int parent, * @param sizep a pointer to store the size into. Use NULL if not required * @param translate Indicates whether to translate the returned value * using the parent node's ranges property. - * @return address, if found, or FDT_ADDR_T_NONE if not + * Return: address, if found, or FDT_ADDR_T_NONE if not */ fdt_addr_t fdtdec_get_addr_size_auto_noparent(const void *blob, int node, const char *prop_name, int index, fdt_size_t *sizep, @@ -414,7 +414,7 @@ fdt_addr_t fdtdec_get_addr_size_auto_noparent(const void *blob, int node, * @param blob FDT blob * @param node node to examine * @param prop_name name of property to find - * @return address, if found, or FDT_ADDR_T_NONE if not + * Return: address, if found, or FDT_ADDR_T_NONE if not */ fdt_addr_t fdtdec_get_addr(const void *blob, int node, const char *prop_name); @@ -442,7 +442,7 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node, * @param node node to examine * @param prop_name name of property to find * @param sizep a pointer to store the size into. Use NULL if not required - * @return address, if found, or FDT_ADDR_T_NONE if not + * Return: address, if found, or FDT_ADDR_T_NONE if not */ fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, const char *prop_name, fdt_size_t *sizep); @@ -455,7 +455,7 @@ fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, * @param node node to examine * @param vendor vendor id of the pci device * @param device device id of the pci device - * @return 0 if ok, negative on error + * Return: 0 if ok, negative on error */ int fdtdec_get_pci_vendev(const void *blob, int node, u16 *vendor, u16 *device); @@ -467,7 +467,7 @@ int fdtdec_get_pci_vendev(const void *blob, int node, * @param dev device to examine * @param addr pci address in the form of fdt_pci_addr * @param bar returns base address of the pci device's registers - * @return 0 if ok, negative on error + * Return: 0 if ok, negative on error */ int fdtdec_get_pci_bar32(const struct udevice *dev, struct fdt_pci_addr *addr, u32 *bar); @@ -479,7 +479,7 @@ int fdtdec_get_pci_bar32(const struct udevice *dev, struct fdt_pci_addr *addr, * @param blob FDT blob * @param node node to examine * @param res the resource structure to return the bus range - * @return 0 if ok, negative on error + * Return: 0 if ok, negative on error */

int fdtdec_get_pci_bus_range(const void *blob, int node, @@ -494,7 +494,7 @@ int fdtdec_get_pci_bus_range(const void *blob, int node, * @param node node to examine * @param prop_name name of property to find * @param default_val default value to return if the property is not found - * @return integer value, if found, or default_val if not + * Return: integer value, if found, or default_val if not */ s32 fdtdec_get_int(const void *blob, int node, const char *prop_name, s32 default_val); @@ -507,7 +507,7 @@ s32 fdtdec_get_int(const void *blob, int node, const char *prop_name, * @param node node to examine * @param prop_name name of property to find * @param default_val default value to return if the property is not found - * @return unsigned integer value, if found, or default_val if not + * Return: unsigned integer value, if found, or default_val if not */ unsigned int fdtdec_get_uint(const void *blob, int node, const char *prop_name, unsigned int default_val); @@ -519,7 +519,7 @@ unsigned int fdtdec_get_uint(const void *blob, int node, const char *prop_name, * * @param ptr Pointer to property * @param cells Number of cells containing the number - * @return the value in the cells + * Return: the value in the cells */ u64 fdtdec_get_number(const fdt32_t *ptr, unsigned int cells);

@@ -533,7 +533,7 @@ u64 fdtdec_get_number(const fdt32_t *ptr, unsigned int cells); * @param node node to examine * @param prop_name name of property to find * @param default_val default value to return if the property is not found - * @return integer value, if found, or default_val if not + * Return: integer value, if found, or default_val if not */ uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name, uint64_t default_val); @@ -547,7 +547,7 @@ uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name, * * @param blob FDT blob * @param node node to examine - * @return integer value 0 (not enabled) or 1 (enabled) + * Return: integer value 0 (not enabled) or 1 (enabled) */ int fdtdec_get_is_enabled(const void *blob, int node);

@@ -556,7 +556,7 @@ int fdtdec_get_is_enabled(const void *blob, int node); * * If not, a message is printed to the console if the console is ready. * - * @return 0 if all ok, -1 if not + * Return: 0 if all ok, -1 if not */ int fdtdec_prepare_fdt(void);

@@ -604,7 +604,7 @@ int fdtdec_check_fdt(void); * @param id Compatible ID to look for * @param node_list Place to put list of found nodes * @param maxcount Maximum number of nodes to find - * @return number of nodes found on success, FDT_ERR_... on error + * Return: number of nodes found on success, FDT_ERR_... on error */ int fdtdec_find_aliases_for_id(const void *blob, const char *name, enum fdt_compat_id id, int *node_list, int maxcount); @@ -645,7 +645,7 @@ int fdtdec_add_aliases_for_id(const void *blob, const char *name, * @param node Node to look up * @param seqp This is set to the sequence number if one is found, * but otherwise the value is left alone - * @return 0 if a sequence was found, -ve if not + * Return: 0 if a sequence was found, -ve if not */ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, int *seqp); @@ -659,7 +659,7 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, * @param blob Device tree blob (if NULL, then error is returned) * @param base Base name for alias susbystem (before the number) * - * @return 0 highest alias ID, -1 if not found + * Return: 0 highest alias ID, -1 if not found */ int fdtdec_get_alias_highest_id(const void *blob, const char *base);

@@ -668,7 +668,7 @@ int fdtdec_get_alias_highest_id(const void *blob, const char *base); * * @param blob Device tree blob (if NULL, then NULL is returned) * @param name Property name to look up - * @return Value of property, or NULL if it does not exist + * Return: Value of property, or NULL if it does not exist */ const char *fdtdec_get_chosen_prop(const void *blob, const char *name);

@@ -680,7 +680,7 @@ const char *fdtdec_get_chosen_prop(const void *blob, const char *name); * * @param blob Device tree blob (if NULL, then error is returned) * @param name Property name, e.g. "stdout-path" - * @return Node offset referred to by that chosen node, or -ve FDT_ERR_... + * Return: Node offset referred to by that chosen node, or -ve FDT_ERR_... */ int fdtdec_get_chosen_node(const void *blob, const char *name);

@@ -688,7 +688,7 @@ int fdtdec_get_chosen_node(const void *blob, const char *name); * Get the name for a compatible ID * * @param id Compatible ID to look for - * @return compatible string for that id + * Return: compatible string for that id */ const char *fdtdec_get_compatible(enum fdt_compat_id id);

@@ -698,7 +698,7 @@ const char *fdtdec_get_compatible(enum fdt_compat_id id); * @param blob FDT blob * @param node node to examine * @param prop_name name of property to find - * @return node offset if found, -ve error code on error + * Return: node offset if found, -ve error code on error */ int fdtdec_lookup_phandle(const void *blob, int node, const char *prop_name);

@@ -712,7 +712,7 @@ int fdtdec_lookup_phandle(const void *blob, int node, const char *prop_name); * @param prop_name name of property to find * @param array array to fill with data * @param count number of array elements - * @return 0 if ok, or -FDT_ERR_NOTFOUND if the property is not found, + * Return: 0 if ok, or -FDT_ERR_NOTFOUND if the property is not found, * or -FDT_ERR_BADLAYOUT if not enough data */ int fdtdec_get_int_array(const void *blob, int node, const char *prop_name, @@ -728,7 +728,7 @@ int fdtdec_get_int_array(const void *blob, int node, const char *prop_name, * @param prop_name name of property to find * @param array array to fill with data * @param count number of array elements - * @return number of array elements if ok, or -FDT_ERR_NOTFOUND if the + * Return: number of array elements if ok, or -FDT_ERR_NOTFOUND if the * property is not found */ int fdtdec_get_int_array_count(const void *blob, int node, @@ -747,7 +747,7 @@ int fdtdec_get_int_array_count(const void *blob, int node, * @param node node to examine * @param prop_name name of property to find * @param count number of array elements - * @return pointer to array if found, or NULL if the property is not + * Return: pointer to array if found, or NULL if the property is not * found or there is not enough data */ const u32 *fdtdec_locate_array(const void *blob, int node, @@ -762,7 +762,7 @@ const u32 *fdtdec_locate_array(const void *blob, int node, * @param blob FDT blob * @param node node to examine * @param prop_name name of property to find - * @return 1 if the properly is present; 0 if it isn't present + * Return: 1 if the properly is present; 0 if it isn't present */ int fdtdec_get_bool(const void *blob, int node, const char *prop_name);

@@ -771,7 +771,7 @@ int fdtdec_get_bool(const void *blob, int node, const char *prop_name); * * @param blob FDT blob * @param node parent node - * @return number of child node; 0 if there is not child node + * Return: number of child node; 0 if there is not child node */ int fdtdec_get_child_count(const void *blob, int node);

@@ -785,7 +785,7 @@ int fdtdec_get_child_count(const void *blob, int node); * @param prop_name name of property to find * @param array array to fill with data * @param count number of array elements - * @return 0 if ok, or -FDT_ERR_MISSING if the property is not found, + * Return: 0 if ok, or -FDT_ERR_MISSING if the property is not found, * or -FDT_ERR_BADLAYOUT if not enough data */ int fdtdec_get_byte_array(const void *blob, int node, const char *prop_name, @@ -801,7 +801,7 @@ int fdtdec_get_byte_array(const void *blob, int node, const char *prop_name, * @param node node to examine * @param prop_name name of property to find * @param count number of array elements - * @return pointer to byte array if found, or NULL if the property is not + * Return: pointer to byte array if found, or NULL if the property is not * found or there is not enough data */ const u8 *fdtdec_locate_byte_array(const void *blob, int node, @@ -815,7 +815,7 @@ const u8 *fdtdec_locate_byte_array(const void *blob, int node, * @param property name of the property to parse * @param index index of the resource to retrieve * @param res returns the resource - * @return 0 if ok, negative on error + * Return: 0 if ok, negative on error */ int fdt_get_resource(const void *fdt, int node, const char *property, unsigned int index, struct fdt_resource *res); @@ -911,7 +911,7 @@ struct display_timing { * @param node 'display-timing' node containing the timing subnodes * @param index Index number to read (0=first timing subnode) * @param config Place to put timings - * @return 0 if OK, -FDT_ERR_NOTFOUND if not found + * Return: 0 if OK, -FDT_ERR_NOTFOUND if not found */ int fdtdec_decode_display_timing(const void *blob, int node, int index, struct display_timing *config); @@ -929,7 +929,7 @@ int fdtdec_decode_display_timing(const void *blob, int node, int index, * address instead of hard coding the value in the case where the memory size * and start address cannot be detected automatically. * - * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or + * Return: 0 if OK, -EINVAL if the /memory node or reg property is missing or * invalid */ int fdtdec_setup_mem_size_base(void); @@ -946,7 +946,7 @@ int fdtdec_setup_mem_size_base(void); * address instead of hard coding the value in the case where the memory size * and start address cannot be detected automatically. * - * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or + * Return: 0 if OK, -EINVAL if the /memory node or reg property is missing or * invalid */ int fdtdec_setup_mem_size_base_lowest(void); @@ -963,7 +963,7 @@ int fdtdec_setup_mem_size_base_lowest(void); * information instead of hard coding the information in cases where it cannot * be detected automatically. * - * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or + * Return: 0 if OK, -EINVAL if the /memory node or reg property is missing or * invalid */ int fdtdec_setup_memory_banksize(void); @@ -988,7 +988,7 @@ int fdtdec_setup_memory_banksize(void); * @param fdt FDT blob * @param mac buffer containing the MAC address to set * @param size size of MAC address - * @return 0 on success or a negative error code on failure + * Return: 0 on success or a negative error code on failure */ int fdtdec_set_ethernet_mac_address(void *fdt, const u8 *mac, size_t size);

@@ -999,7 +999,7 @@ int fdtdec_set_ethernet_mac_address(void *fdt, const u8 *mac, size_t size); * @param node offset in the FDT blob of the node whose phandle is to * be set * @param phandle phandle to set for the given node - * @return 0 on success or a negative error code on failure + * Return: 0 on success or a negative error code on failure */ static inline int fdtdec_set_phandle(void *blob, int node, uint32_t phandle) { @@ -1058,7 +1058,7 @@ static inline int fdtdec_set_phandle(void *blob, int node, uint32_t phandle) * @param phandlep return location for the phandle of the carveout region * can be NULL if no phandle should be added * @param flags bitmask of flags to set for the carveout region - * @return 0 on success or a negative error code on failure + * Return: 0 on success or a negative error code on failure */ int fdtdec_add_reserved_memory(void *blob, const char *basename, const struct fdt_memory *carveout, @@ -1082,7 +1082,7 @@ int fdtdec_add_reserved_memory(void *blob, const char *basename, * @param compatiblesp return location for compatible strings * @param countp return location for the number of compatible strings * @param flags return location for the flags of the carveout - * @return 0 on success or a negative error code on failure + * Return: 0 on success or a negative error code on failure */ int fdtdec_get_carveout(const void *blob, const char *node, const char *prop_name, unsigned int index, @@ -1149,7 +1149,7 @@ int fdtdec_get_carveout(const void *blob, const char *node, * @param compatibles compatible strings to set for the carveout * @param count number of compatible strings * @param flags bitmask of flags to set for the carveout - * @return 0 on success or a negative error code on failure + * Return: 0 on success or a negative error code on failure */ int fdtdec_set_carveout(void *blob, const char *node, const char *prop_name, unsigned int index, const struct fdt_memory *carveout, @@ -1182,7 +1182,7 @@ int fdtdec_board_setup(const void *fdt_blob); * @param rescan Returns a flag indicating that fdt has changed and rescanning * the fdt is required * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fdtdec_resetup(int *rescan); #endif @@ -1228,7 +1228,7 @@ void *board_fdt_blob_setup(int *err); * ignore) * @param sizep Returns total memory size (NULL to ignore) * @param bd Updated with the memory bank information (NULL to skip) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fdtdec_decode_ram_size(const void *blob, const char *area, int board_id, phys_addr_t *basep, phys_size_t *sizep, @@ -1237,7 +1237,7 @@ int fdtdec_decode_ram_size(const void *blob, const char *area, int board_id, /** * fdtdec_get_srcname() - Get the name of where the devicetree comes from * - * @return source name + * Return: source name */ const char *fdtdec_get_srcname(void);

diff --git a/include/fs.h b/include/fs.h index 1c79e299fd..c8df3886ac 100644 --- a/include/fs.h +++ b/include/fs.h @@ -27,7 +27,7 @@ struct blk_desc; * @flag: Command flags (CMD_FLAG_...) * @argc: Number of arguments * @argv: List of arguments - * @return result (see enum command_ret_t) + * Return: result (see enum command_ret_t) */ int do_fat_fsload(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); @@ -39,7 +39,7 @@ int do_fat_fsload(struct cmd_tbl *cmdtp, int flag, int argc, * @flag: Command flags (CMD_FLAG_...) * @argc: Number of arguments * @argv: List of arguments - * @return result (see enum command_ret_t) + * Return: result (see enum command_ret_t) */ int do_ext2load(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);

@@ -118,7 +118,7 @@ int fs_exists(const char *filename); * * @filename: Name of the file * @size: Size of file - * @return 0 if ok with valid *size, negative on error + * Return: 0 if ok with valid *size, negative on error */ int fs_size(const char *filename, loff_t *size);

@@ -195,7 +195,7 @@ struct fs_dir_stream { * fs_opendir - Open a directory * * @filename: the path to directory to open - * @return a pointer to the directory stream or NULL on error and errno + * Return: a pointer to the directory stream or NULL on error and errno * set appropriately */ struct fs_dir_stream *fs_opendir(const char *filename); @@ -209,7 +209,7 @@ struct fs_dir_stream *fs_opendir(const char *filename); * longer valid. * * @dirs: the directory stream - * @return the next directory entry (only valid until next fs_readdir() or + * Return: the next directory entry (only valid until next fs_readdir() or * fs_closedir() call, do not attempt to free()) or NULL if the end of * the directory is reached. */ @@ -228,7 +228,7 @@ void fs_closedir(struct fs_dir_stream *dirs); * If a given name is a directory, it will be deleted only if it's empty * * @filename: Name of file or directory to delete - * @return 0 on success, -1 on error conditions + * Return: 0 on success, -1 on error conditions */ int fs_unlink(const char *filename);

@@ -236,7 +236,7 @@ int fs_unlink(const char *filename); * fs_mkdir - Create a directory * * @filename: Name of directory to create - * @return 0 on success, -1 on error conditions + * Return: 0 on success, -1 on error conditions */ int fs_mkdir(const char *filename);

@@ -281,7 +281,7 @@ int do_fs_type(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); * @flag: Command flags (CMD_FLAG_...) * @argc: Number of arguments * @argv: List of arguments - * @return result (see enum command_ret_t) + * Return: result (see enum command_ret_t) */ int do_fs_types(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]);

diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index 56c9db2594..a7272e4be7 100644 --- a/include/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -483,7 +483,7 @@ typedef struct fixed_ddr_parm{ /** * fsl_initdram() - Set up the SDRAM * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int fsl_initdram(void);

diff --git a/include/generic-phy.h b/include/generic-phy.h index 9a11659640..ff48b37081 100644 --- a/include/generic-phy.h +++ b/include/generic-phy.h @@ -79,7 +79,7 @@ struct phy_ops { * If power_off() is not implemented, it must power down the phy. * * @phy: PHY port to be de-initialized - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int (*exit)(struct phy *phy);

@@ -91,7 +91,7 @@ struct phy_ops { * During runtime, the PHY may need to be reset in order to * re-establish connection etc without being shut down or exit. * - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int (*reset)(struct phy *phy);

@@ -105,7 +105,7 @@ struct phy_ops { * setup done in init(). If init() is not implemented, it must take care * of setting up the context (PLLs, ...) * - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int (*power_on)(struct phy *phy);

@@ -119,7 +119,7 @@ struct phy_ops { * init()/deinit() are not implemented, it must not de-initialize * everything. * - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int (*power_off)(struct phy *phy);

@@ -133,7 +133,7 @@ struct phy_ops { * This function configures the PHY for it's main function following * power_on/off() after beeing initialized. * - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int (*configure)(struct phy *phy, void *params); }; @@ -161,7 +161,7 @@ struct phy_bulk { * generic_phy_init() - initialize the PHY port * * @phy: the PHY port to initialize - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_init(struct phy *phy);

@@ -169,7 +169,7 @@ int generic_phy_init(struct phy *phy); * generic_phy_init() - de-initialize the PHY device * * @phy: PHY port to be de-initialized - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_exit(struct phy *phy);

@@ -177,7 +177,7 @@ int generic_phy_exit(struct phy *phy); * generic_phy_reset() - resets a PHY device without shutting down * * @phy: PHY port to be reset - *@return 0 if OK, or a negative error code + *Return: 0 if OK, or a negative error code */ int generic_phy_reset(struct phy *phy);

@@ -185,7 +185,7 @@ int generic_phy_reset(struct phy *phy); * generic_phy_power_on() - power on a PHY device * * @phy: PHY port to be powered on - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_power_on(struct phy *phy);

@@ -193,7 +193,7 @@ int generic_phy_power_on(struct phy *phy); * generic_phy_power_off() - power off a PHY device * * @phy: PHY port to be powered off - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_power_off(struct phy *phy);

@@ -202,7 +202,7 @@ int generic_phy_power_off(struct phy *phy); * * @phy: PHY port to be configured * @params: PHY Parameters, underlying data is specific to the PHY function - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_configure(struct phy *phy, void *params);

@@ -230,7 +230,7 @@ int generic_phy_configure(struct phy *phy, void *params); * the USB2 phy can be accessed by passing index '0' and the USB3 phy can * be accessed by passing index '1' * - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_get_by_index(struct udevice *user, int index, struct phy *phy); @@ -261,7 +261,7 @@ int generic_phy_get_by_index(struct udevice *user, int index, * the USB2 phy can be accessed by passing index '0' and the USB3 phy can * be accessed by passing index '1' * - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_get_by_index_nodev(ofnode node, int index, struct phy *phy);

@@ -288,7 +288,7 @@ int generic_phy_get_by_index_nodev(ofnode node, int index, struct phy *phy); * }; * the USB3 phy can be accessed using "usb3phy", and USB2 by using "usb2phy" * - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int generic_phy_get_by_name(struct udevice *user, const char *phy_name, struct phy *phy); @@ -302,7 +302,7 @@ int generic_phy_get_by_name(struct udevice *user, const char *phy_name, * * @dev: The consumer device. * @bulk A pointer to a phy bulk struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int generic_phy_get_bulk(struct udevice *dev, struct phy_bulk *bulk);

@@ -311,7 +311,7 @@ int generic_phy_get_bulk(struct udevice *dev, struct phy_bulk *bulk); * * @bulk: A phy bulk struct that was previously successfully requested * by generic_phy_get_bulk(). - * @return 0 if OK, or negative error code. + * Return: 0 if OK, or negative error code. */ int generic_phy_init_bulk(struct phy_bulk *bulk);

@@ -320,7 +320,7 @@ int generic_phy_init_bulk(struct phy_bulk *bulk); * * @bulk: A phy bulk struct that was previously successfully requested * by generic_phy_get_bulk(). - * @return 0 if OK, or negative error code. + * Return: 0 if OK, or negative error code. */ int generic_phy_exit_bulk(struct phy_bulk *bulk);

@@ -329,7 +329,7 @@ int generic_phy_exit_bulk(struct phy_bulk *bulk); * * @bulk: A phy bulk struct that was previously successfully requested * by generic_phy_get_bulk(). - * @return 0 if OK, or negative error code. + * Return: 0 if OK, or negative error code. */ int generic_phy_power_on_bulk(struct phy_bulk *bulk);

@@ -338,7 +338,7 @@ int generic_phy_power_on_bulk(struct phy_bulk *bulk); * * @bulk: A phy bulk struct that was previously successfully requested * by generic_phy_get_bulk(). - * @return 0 if OK, or negative error code. + * Return: 0 if OK, or negative error code. */ int generic_phy_power_off_bulk(struct phy_bulk *bulk);

@@ -413,7 +413,7 @@ static inline int generic_phy_power_off_bulk(struct phy_bulk *bulk) * generic_phy_valid() - check if PHY port is valid * * @phy: the PHY port to check - * @return TRUE if valid, or FALSE + * Return: TRUE if valid, or FALSE */ static inline bool generic_phy_valid(struct phy *phy) { diff --git a/include/gzip.h b/include/gzip.h index cb4db3d70f..e578b283ed 100644 --- a/include/gzip.h +++ b/include/gzip.h @@ -16,7 +16,7 @@ struct blk_desc; * * @src: Pointer to gzip file * @len: Length of data - * @return length of header in bytes, or -1 if not enough data + * Return: length of header in bytes, or -1 if not enough data */ int gzip_parse_header(const unsigned char *src, unsigned long len);

@@ -27,7 +27,7 @@ int gzip_parse_header(const unsigned char *src, unsigned long len); * @dstlen: Size of destination buffer * @src: Source data to decompress * @lenp: Returns length of uncompressed data - * @return 0 if OK, -1 on error + * Return: 0 if OK, -1 on error */ int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp);

@@ -40,7 +40,7 @@ int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp); * @lenp: On entry, length data at @src. On exit, number of bytes used from @src * @stoponerr: 0 to continue when a decode error is found, 1 to stop * @offset: start offset within the src buffer - * @return 0 if OK, -1 on error + * Return: 0 if OK, -1 on error */ int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, int stoponerr, int offset); @@ -71,7 +71,7 @@ void gzwrite_progress_finish(int retcode, ulong totalwritten, ulong totalsize, * @startoffs: offset in bytes of first write * @szexpected: expected uncompressed length, may be zero to use gzip trailer * for files under 4GiB - * @return 0 if OK, -1 on error + * Return: 0 if OK, -1 on error */ int gzwrite(unsigned char *src, int len, struct blk_desc *dev, ulong szwritebuf, ulong startoffs, ulong szexpected); @@ -84,7 +84,7 @@ int gzwrite(unsigned char *src, int len, struct blk_desc *dev, ulong szwritebuf, * number of bytes used in the buffer * @src: Source data to compress * @srclen: Size of source data - * @return 0 if OK, -1 on error + * Return: 0 if OK, -1 on error */ int gzip(void *dst, unsigned long *lenp, unsigned char *src, ulong srclen);

diff --git a/include/handoff.h b/include/handoff.h index 070a79c1b9..0104b834f2 100644 --- a/include/handoff.h +++ b/include/handoff.h @@ -38,7 +38,7 @@ void handoff_load_dram_banks(struct spl_handoff *ho); * write_spl_handoff(). * * @ho: Handoff area to fill in - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int handoff_arch_save(struct spl_handoff *ho);

diff --git a/include/hash.h b/include/hash.h index cfafbe7006..8b3f79ec47 100644 --- a/include/hash.h +++ b/include/hash.h @@ -114,7 +114,7 @@ int hash_command(const char *algo_name, int flags, struct cmd_tbl *cmdtp, * If NULL, then it is assumed that the caller has * allocated enough space for the hash. This is possible * since the caller is selecting the algorithm. - * @return 0 if ok, -ve on error: -EPROTONOSUPPORT for an unknown algorithm, + * Return: 0 if ok, -ve on error: -EPROTONOSUPPORT for an unknown algorithm, * -ENOSPC if the output buffer is not large enough. */ int hash_block(const char *algo_name, const void *data, unsigned int len, @@ -131,7 +131,7 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, * @algo_name: Hash algorithm to look up * @algop: Pointer to the hash_algo struct if found * - * @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. + * Return: 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. */ int hash_lookup_algo(const char *algo_name, struct hash_algo **algop);

@@ -144,7 +144,7 @@ int hash_lookup_algo(const char *algo_name, struct hash_algo **algop); * @algo_name: Hash algorithm to look up * @algop: Pointer to the hash_algo struct if found * - * @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. + * Return: 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. */ int hash_progressive_lookup_algo(const char *algo_name, struct hash_algo **algop); @@ -159,7 +159,7 @@ int hash_progressive_lookup_algo(const char *algo_name, * @str: Hash string to get parsed * @result: Binary array of the parsed hash string * - * @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. + * Return: 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. */ int hash_parse_string(const char *algo_name, const char *str, uint8_t *result);

diff --git a/include/hda_codec.h b/include/hda_codec.h index 56de571f0f..247eafe66e 100644 --- a/include/hda_codec.h +++ b/include/hda_codec.h @@ -27,7 +27,7 @@ struct hda_codec_priv { * hda_wait_for_ready() - Wait for the codec to indicate it is ready * * @regs: HDA registers - * @return 0 if OK -ETIMEDOUT if codec did not respond in time + * Return: 0 if OK -ETIMEDOUT if codec did not respond in time */ int hda_wait_for_ready(struct hda_regs *regs);

@@ -35,7 +35,7 @@ int hda_wait_for_ready(struct hda_regs *regs); * hda_wait_for_valid() - Wait for the codec to accept the last command * * @regs: HDA registers - * @return 0 if OK -ETIMEDOUT if codec did not respond in time + * Return: 0 if OK -ETIMEDOUT if codec did not respond in time */ int hda_wait_for_valid(struct hda_regs *regs);

@@ -43,8 +43,8 @@ int hda_wait_for_valid(struct hda_regs *regs); * hda_codec_detect() - Detect which codecs are present * * @regs: HDA registers - * @return bit mask of active codecs (0 if none) - * @return 0 if OK, -ve on error + * Return: bit mask of active codecs (0 if none) + * Return: 0 if OK, -ve on error */ int hda_codec_detect(struct hda_regs *regs);

@@ -54,7 +54,7 @@ int hda_codec_detect(struct hda_regs *regs); * @dev: Sound device * @regs: HDA registers * @codec_mask: Mask of codecs to init (bits 3:0) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int hda_codecs_init(struct udevice *dev, struct hda_regs *regs, u32 codec_mask);

@@ -66,7 +66,7 @@ int hda_codecs_init(struct udevice *dev, struct hda_regs *regs, u32 codec_mask); * * @dev: Sound device * @frequency_hz: Beep frequency in hertz - * @return if OK, -ve on error + * Return: if OK, -ve on error */ int hda_codec_start_beep(struct udevice *dev, int frequency_hz);

@@ -76,7 +76,7 @@ int hda_codec_start_beep(struct udevice *dev, int frequency_hz); * This tells the sound hardware to stop a previously started beep. * * @dev: Sound device - * @return if OK, -ve on error + * Return: if OK, -ve on error */ int hda_codec_stop_beep(struct udevice *dev);

@@ -86,7 +86,7 @@ int hda_codec_stop_beep(struct udevice *dev); * This should be called at the start of the probe() method. * * @dev: Sound device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int hda_codec_init(struct udevice *dev);

@@ -96,7 +96,7 @@ int hda_codec_init(struct udevice *dev); * This should be called at the end of the probe() method. * * @dev: Sound device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int hda_codec_finish_init(struct udevice *dev);

diff --git a/include/hw_sha.h b/include/hw_sha.h index d4f3471c43..b9bb583810 100644 --- a/include/hw_sha.h +++ b/include/hw_sha.h @@ -65,7 +65,7 @@ void hw_sha1(const uchar *in_addr, uint buflen, uchar *out_addr, * * @algo: Pointer to the hash_algo struct * @ctxp: Pointer to the pointer of the context for hashing - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ int hw_sha_init(struct hash_algo *algo, void **ctxp);

@@ -79,7 +79,7 @@ int hw_sha_init(struct hash_algo *algo, void **ctxp); * @buf: Pointer to the buffer being hashed * @size: Size of the buffer being hashed * @is_last: 1 if this is the last update; 0 otherwise - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, unsigned int size, int is_last); @@ -93,7 +93,7 @@ int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, * @ctx: Pointer to the context for hashing * @dest_buf: Pointer to the destination buffer where hash is to be copied * @size: Size of the buffer being hashed - * @return 0 if ok, -ve on error + * Return: 0 if ok, -ve on error */ int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, int size); diff --git a/include/hwspinlock.h b/include/hwspinlock.h index 99389c13c2..d8556c0b4b 100644 --- a/include/hwspinlock.h +++ b/include/hwspinlock.h @@ -39,7 +39,7 @@ struct hwspinlock { * @index: The index of the hardware spinlock to request, within the * client's list of hardware spinlock. * @hws: A pointer to a hardware spinlock struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int hwspinlock_get_by_index(struct udevice *dev, int index, struct hwspinlock *hws); diff --git a/include/i2c.h b/include/i2c.h index a35e99bf87..22add0b528 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -184,7 +184,7 @@ struct i2c_msg_list { * @buffer: Place to put data * @len: Number of bytes to read * - * @return 0 on success, -ve on failure + * Return: 0 on success, -ve on failure */ int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len);

@@ -198,7 +198,7 @@ int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len); * @buffer: Buffer containing data to write * @len: Number of bytes to write * - * @return 0 on success, -ve on failure + * Return: 0 on success, -ve on failure */ int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, int len); @@ -214,7 +214,7 @@ int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, * @chip_addr: 7-bit address to probe (10-bit and others are not supported) * @chip_flags: Flags for the probe (see enum dm_i2c_chip_flags) * @devp: Returns the device found, or NULL if none - * @return 0 if a chip was found at that address, -ve if not + * Return: 0 if a chip was found at that address, -ve if not */ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, struct udevice **devp); @@ -226,7 +226,7 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, * * @dev: Device to use for transfer * @addr: Address to read from - * @return value read, or -ve on error + * Return: value read, or -ve on error */ int dm_i2c_reg_read(struct udevice *dev, uint offset);

@@ -238,7 +238,7 @@ int dm_i2c_reg_read(struct udevice *dev, uint offset); * @dev: Device to use for transfer * @addr: Address to write to * @val: Value to write (normally a byte) - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int dm_i2c_reg_write(struct udevice *dev, uint offset, unsigned int val);

@@ -252,7 +252,7 @@ int dm_i2c_reg_write(struct udevice *dev, uint offset, unsigned int val); * @offset: Address for the R/W operation * @clr: Bitmask of bits that should be cleared * @set: Bitmask of bits that should be set - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int dm_i2c_reg_clrset(struct udevice *dev, uint offset, u32 clr, u32 set);

@@ -265,7 +265,7 @@ int dm_i2c_reg_clrset(struct udevice *dev, uint offset, u32 clr, u32 set); * @dev: Device to use for transfer * @msg: List of messages to transfer * @nmsgs: Number of messages to transfer - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int dm_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs);

@@ -274,7 +274,7 @@ int dm_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs); * * @bus: Bus to adjust * @speed: Requested speed in Hz - * @return 0 if OK, -EINVAL for invalid values + * Return: 0 if OK, -EINVAL for invalid values */ int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed);

@@ -282,7 +282,7 @@ int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed); * dm_i2c_get_bus_speed() - get the speed of a bus * * @bus: Bus to check - * @return speed of selected I2C bus in Hz, -ve on error + * Return: speed of selected I2C bus in Hz, -ve on error */ int dm_i2c_get_bus_speed(struct udevice *bus);

@@ -294,7 +294,7 @@ int dm_i2c_get_bus_speed(struct udevice *bus); * * @dev: Chip to adjust * @flags: New flags - * @return 0 if OK, -EINVAL if value is unsupported, other -ve value on error + * Return: 0 if OK, -EINVAL if value is unsupported, other -ve value on error */ int i2c_set_chip_flags(struct udevice *dev, uint flags);

@@ -303,7 +303,7 @@ int i2c_set_chip_flags(struct udevice *dev, uint flags); * * @dev: Chip to check * @flagsp: Place to put flags - * @return 0 if OK, other -ve value on error + * Return: 0 if OK, other -ve value on error */ int i2c_get_chip_flags(struct udevice *dev, uint *flagsp);

@@ -334,14 +334,14 @@ int i2c_get_chip_offset_len(struct udevice *dev); * function to set the bits that are valid to be used for offset overflow. * * @mask: The mask to be used for high offset bits within address - * @return 0 if OK, other -ve value on error + * Return: 0 if OK, other -ve value on error */ int i2c_set_chip_addr_offset_mask(struct udevice *dev, uint mask);

/* * i2c_get_chip_addr_offset_mask() - get mask of address bits usable by offset * - * @return current chip addr offset mask + * Return: current chip addr offset mask */ uint i2c_get_chip_addr_offset_mask(struct udevice *dev);

@@ -351,7 +351,7 @@ uint i2c_get_chip_addr_offset_mask(struct udevice *dev); * See the deblock() method in 'struct dm_i2c_ops' for full information * * @bus: Bus to recover - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int i2c_deblock(struct udevice *bus);

@@ -366,7 +366,7 @@ int i2c_deblock(struct udevice *bus); * @scl_count: Number of SCL clock cycles generated to deblock SDA * @start_count:Number of I2C start conditions sent after deblocking SDA * @delay: Delay between SCL clock line changes - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ struct gpio_desc; int i2c_deblock_gpio_loop(struct gpio_desc *sda_pin, struct gpio_desc *scl_pin, @@ -567,7 +567,7 @@ void i2c_dump_msgs(struct i2c_msg *msg, int nmsgs); * * @dev: Device to find an emulator for * @emulp: Returns the associated emulator, if found * - * @return 0 if OK, -ENOENT or -ENODEV if not found + * Return: 0 if OK, -ENOENT or -ENODEV if not found */ int i2c_emul_find(struct udevice *dev, struct udevice **emulp);

@@ -589,7 +589,7 @@ void i2c_emul_set_idx(struct udevice *dev, int emul_idx); * Given an emulator this returns the associated device * * @emul: Emulator for the device - * @return device that @emul is emulating + * Return: device that @emul is emulating */ struct udevice *i2c_emul_get_device(struct udevice *emul);

@@ -606,7 +606,7 @@ extern struct acpi_ops i2c_acpi_ops; * properties. * * @dev: I2C device to process - * @return 0 if OK, -EINVAL if acpi,hid is not present + * Return: 0 if OK, -EINVAL if acpi,hid is not present */ int acpi_i2c_of_to_plat(struct udevice *dev);

@@ -967,7 +967,7 @@ enum { * Get FDT values for i2c bus. * * @param blob Device tree blbo - * @return the number of I2C bus + * Return: the number of I2C bus */ void board_i2c_init(const void *blob);

@@ -976,7 +976,7 @@ void board_i2c_init(const void *blob); * * @param blob Device tree blbo * @param node FDT I2C node to find - * @return the number of I2C bus (zero based), or -1 on error + * Return: the number of I2C bus (zero based), or -1 on error */ int i2c_get_bus_num_fdt(int node);

@@ -985,7 +985,7 @@ int i2c_get_bus_num_fdt(int node); * * @param blob Device tree blbo * @param node FDT I2C node to find - * @return 0 if port was reset, -1 if not found + * Return: 0 if port was reset, -1 if not found */ int i2c_reset_port_fdt(const void *blob, int node);

diff --git a/include/i2c_eeprom.h b/include/i2c_eeprom.h index cd620d519f..3ad565684f 100644 --- a/include/i2c_eeprom.h +++ b/include/i2c_eeprom.h @@ -28,7 +28,7 @@ struct i2c_eeprom { * @buf: Place to put data * @size: Number of bytes to read * - * @return 0 on success, -ve on failure + * Return: 0 on success, -ve on failure */ int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int size);

@@ -40,7 +40,7 @@ int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int size); * @buf: Buffer containing data to write * @size: Number of bytes to write * - * @return 0 on success, -ve on failure + * Return: 0 on success, -ve on failure */ int i2c_eeprom_write(struct udevice *dev, int offset, uint8_t *buf, int size);

@@ -49,7 +49,7 @@ int i2c_eeprom_write(struct udevice *dev, int offset, uint8_t *buf, int size); * * @dev: Chip to query * - * @return +ve size in bytes on success, -ve on failure + * Return: +ve size in bytes on success, -ve on failure */ int i2c_eeprom_size(struct udevice *dev);

diff --git a/include/i2s.h b/include/i2s.h index 7760aab7c4..c9fbeb5d8a 100644 --- a/include/i2s.h +++ b/include/i2s.h @@ -108,7 +108,7 @@ struct i2s_ops { * @dev: I2C device * @data: Data buffer to play * @data_size: Size of data buffer in bytes - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int i2s_tx_data(struct udevice *dev, void *data, uint data_size);

@@ -118,7 +118,7 @@ int i2s_tx_data(struct udevice *dev, void *data, uint data_size); * @param pi2s_tx pointer of i2s transmitter parameter structure. * @param data address of the data buffer * @param data_size size of the data (in bytes) - * @return int value 0 for success, -1 in case of error + * Return: int value 0 for success, -1 in case of error */ int i2s_transfer_tx_data(struct i2s_uc_priv *pi2s_tx, void *data, uint data_size); diff --git a/include/ide.h b/include/ide.h index 1b37d67992..60739436e9 100644 --- a/include/ide.h +++ b/include/ide.h @@ -64,7 +64,7 @@ void ide_led(uchar led, uchar status); /** * board_start_ide() - Start up the board IDE interfac * - * @return 0 if ok + * Return: 0 if ok */ int board_start_ide(void);

diff --git a/include/image.h b/include/image.h index fd662e74b4..1cdc70faee 100644 --- a/include/image.h +++ b/include/image.h @@ -422,7 +422,7 @@ const char *genimg_get_os_name(uint8_t os); * genimg_get_os_short_name() - get the short name for an OS * * @param os OS (IH_OS_...) - * @return OS short name, or "unknown" if unknown + * Return: OS short name, or "unknown" if unknown */ const char *genimg_get_os_short_name(uint8_t comp);

@@ -432,7 +432,7 @@ const char *genimg_get_arch_name(uint8_t arch); * genimg_get_arch_short_name() - get the short name for an architecture * * @param arch Architecture type (IH_ARCH_...) - * @return architecture short name, or "unknown" if unknown + * Return: architecture short name, or "unknown" if unknown */ const char *genimg_get_arch_short_name(uint8_t arch);

@@ -442,7 +442,7 @@ const char *genimg_get_type_name(uint8_t type); * genimg_get_type_short_name() - get the short name for an image type * * @param type Image type (IH_TYPE_...) - * @return image short name, or "unknown" if unknown + * Return: image short name, or "unknown" if unknown */ const char *genimg_get_type_short_name(uint8_t type);

@@ -452,7 +452,7 @@ const char *genimg_get_comp_name(uint8_t comp); * genimg_get_comp_short_name() - get the short name for a compression method * * @param comp compression method (IH_COMP_...) - * @return compression method short name, or "unknown" if unknown + * Return: compression method short name, or "unknown" if unknown */ const char *genimg_get_comp_short_name(uint8_t comp);

@@ -461,7 +461,7 @@ const char *genimg_get_comp_short_name(uint8_t comp); * * @category: Category of item * @id: Item ID - * @return name of item, or "Unknown ..." if unknown + * Return: name of item, or "Unknown ..." if unknown */ const char *genimg_get_cat_name(enum ih_category category, uint id);

@@ -470,7 +470,7 @@ const char *genimg_get_cat_name(enum ih_category category, uint id); * * @category: Category of item * @id: Item ID - * @return short name of item, or "Unknown ..." if unknown + * Return: short name of item, or "Unknown ..." if unknown */ const char *genimg_get_cat_short_name(enum ih_category category, uint id);

@@ -478,7 +478,7 @@ const char *genimg_get_cat_short_name(enum ih_category category, uint id); * genimg_get_cat_count() - Get the number of items in a category * * @category: Category to check - * @return the number of items in the category (IH_xxx_COUNT) + * Return: the number of items in the category (IH_xxx_COUNT) */ int genimg_get_cat_count(enum ih_category category);

@@ -486,7 +486,7 @@ int genimg_get_cat_count(enum ih_category category); * genimg_get_cat_desc() - Get the description of a category * * @category: Category to check - * @return the description of a category, e.g. "architecture". This + * Return: the description of a category, e.g. "architecture". This * effectively converts the enum to a string. */ const char *genimg_get_cat_desc(enum ih_category category); @@ -496,7 +496,7 @@ const char *genimg_get_cat_desc(enum ih_category category); * * @category: Category to check * @id: Item ID - * @return true or false as to whether a category has an item + * Return: true or false as to whether a category has an item */ bool genimg_cat_has_id(enum ih_category category, uint id);

@@ -588,7 +588,7 @@ int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch, * @param datap Returns address of loaded image * @param lenp Returns length of loaded image * - * @return node offset of base image, or -ve error code on error + * Return: node offset of base image, or -ve error code on error */ int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, const char **fit_unamep, const char **fit_uname_configp, @@ -622,7 +622,7 @@ int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, * @param load_op Decribes what to do with the load address * @param datap Returns address of loaded image * @param lenp Returns length of loaded image - * @return node offset of image, or -ve error code on error + * Return: node offset of image, or -ve error code on error */ int fit_image_load(bootm_headers_t *images, ulong addr, const char **fit_unamep, const char **fit_uname_configp, @@ -637,7 +637,7 @@ int fit_image_load(bootm_headers_t *images, ulong addr, * * @addr: Address of script * @fit_uname: FIT subimage name - * @return result code (enum command_ret_t) + * Return: result code (enum command_ret_t) */ int image_source_script(ulong addr, const char *fit_uname);

@@ -827,7 +827,7 @@ static inline int image_check_target_arch(const image_header_t *hdr) * * @buf: Address in U-Boot memory where image is loaded. * @len: Length of the compressed image. - * @return compression type or IH_COMP_NONE if not compressed. + * Return: compression type or IH_COMP_NONE if not compressed. * * Note: Only following compression types are supported now. * lzo, lzma, gzip, bzip2 @@ -845,7 +845,7 @@ int image_decomp_type(const unsigned char *buf, ulong len); * @image_buf: Address to decompress from * @image_len: Number of bytes in @image_buf to decompress * @unc_len: Available space for decompression - * @return 0 if OK, -ve on error (BOOTM_ERR_...) + * Return: 0 if OK, -ve on error (BOOTM_ERR_...) */ int image_decomp(int comp, ulong load, ulong image_start, int type, void *load_buf, void *image_buf, ulong image_len, @@ -860,7 +860,7 @@ int image_decomp(int comp, ulong load, ulong image_start, int type, * @blob: FDT to update * @of_size: Size of the FDT * @lmb: Points to logical memory block structure - * @return 0 if ok, <0 on failure + * Return: 0 if ok, <0 on failure */ int image_setup_libfdt(bootm_headers_t *images, void *blob, int of_size, struct lmb *lmb); @@ -872,7 +872,7 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, * paramters to the FDT if libfdt is available. * * @param images Images information - * @return 0 if ok, <0 on failure + * Return: 0 if ok, <0 on failure */ int image_setup_linux(bootm_headers_t *images);

@@ -882,7 +882,7 @@ int image_setup_linux(bootm_headers_t *images); * @image: Address of image * @start: Returns start address of image * @end : Returns end address of image - * @return 0 if OK, 1 if the image was not recognised + * Return: 0 if OK, 1 if the image was not recognised */ int bootz_setup(ulong image, ulong *start, ulong *end);

@@ -893,7 +893,7 @@ int bootz_setup(ulong image, ulong *start, ulong *end); * @start: Returns start address of image * @size : Returns size image * @force_reloc: Ignore image->ep field, always place image to RAM start - * @return 0 if OK, 1 if the image was not recognised + * Return: 0 if OK, 1 if the image was not recognised */ int booti_setup(ulong image, ulong *relocated_addr, ulong *size, bool force_reloc); @@ -1068,7 +1068,7 @@ int fit_image_check_comp(const void *fit, int noffset, uint8_t comp); * sure that there are no strange tags or broken nodes in the FIT. * * @fit: pointer to the FIT format image header - * @return 0 if OK, -ENOEXEC if not an FDT file, -EINVAL if the full FDT check + * Return: 0 if OK, -ENOEXEC if not an FDT file, -EINVAL if the full FDT check * failed (e.g. due to bad structure), -ENOMSG if the description is * missing, -EBADMSG if the timestamp is missing, -ENOENT if the /images * path is missing @@ -1269,7 +1269,7 @@ ll_entry_declare(struct padding_algo, __name, paddings) * image_get_checksum_algo() - Look up a checksum algorithm * * @param full_name Name of algorithm in the form "checksum,crypto" - * @return pointer to algorithm information, or NULL if not found + * Return: pointer to algorithm information, or NULL if not found */ struct checksum_algo *image_get_checksum_algo(const char *full_name);

@@ -1277,7 +1277,7 @@ struct checksum_algo *image_get_checksum_algo(const char *full_name); * image_get_crypto_algo() - Look up a cryptosystem algorithm * * @param full_name Name of algorithm in the form "checksum,crypto" - * @return pointer to algorithm information, or NULL if not found + * Return: pointer to algorithm information, or NULL if not found */ struct crypto_algo *image_get_crypto_algo(const char *full_name);

@@ -1285,7 +1285,7 @@ struct crypto_algo *image_get_crypto_algo(const char *full_name); * image_get_padding_algo() - Look up a padding algorithm * * @param name Name of padding algorithm - * @return pointer to algorithm information, or NULL if not found + * Return: pointer to algorithm information, or NULL if not found */ struct padding_algo *image_get_padding_algo(const char *name);

@@ -1301,7 +1301,7 @@ struct padding_algo *image_get_padding_algo(const char *name); * therefore nothing was checked. The caller may wish * to fall back to other mechanisms, or refuse to * boot. - * @return 0 if all verified ok, <0 on error + * Return: 0 if all verified ok, <0 on error */ int fit_image_verify_required_sigs(const void *fit, int image_noffset, const char *data, size_t size, const void *sig_blob, @@ -1320,7 +1320,7 @@ int fit_image_verify_required_sigs(const void *fit, int image_noffset, * -1 then any signature will do. * @err_msgp: In the event of an error, this will be pointed to a * help error string to display to the user. - * @return 0 if all verified ok, <0 on error + * Return: 0 if all verified ok, <0 on error */ int fit_image_check_sig(const void *fit, int noffset, const void *data, size_t size, int required_keynode, char **err_msgp); @@ -1341,7 +1341,7 @@ int fit_image_decrypt_data(const void *fit, * @fdt_regions: Regions as returned by libfdt * @count: Number of regions returned by libfdt * @region: Place to put list of regions (NULL to allocate it) - * @return pointer to list of regions, or NULL if out of memory + * Return: pointer to list of regions, or NULL if out of memory */ struct image_region *fit_region_make_list(const void *fit, struct fdt_region *fdt_regions, int count, @@ -1440,7 +1440,7 @@ bool android_image_print_dtb_contents(ulong hdr_addr); * in each (FDT) image node. * * @name: Device tree description - * @return 0 if this device tree should be used, non-zero to try the next + * Return: 0 if this device tree should be used, non-zero to try the next */ int board_fit_config_name_match(const char *name);

@@ -1457,7 +1457,7 @@ int board_fit_config_name_match(const char *name); * @node: offset of image node * @image: pointer to the image start pointer * @size: pointer to the image size - * @return no return value (failure should be handled internally) + * Return: no return value (failure should be handled internally) */ void board_fit_image_post_process(const void *fit, int node, void **p_image, size_t *p_size); @@ -1476,7 +1476,7 @@ ulong fdt_getprop_u32(const void *fdt, int node, const char *prop); * the node described by the default configuration if it exists. * * @fdt: pointer to flat device tree - * @return the node if found, -ve otherwise + * Return: the node if found, -ve otherwise */ int fit_find_config_node(const void *fdt);

diff --git a/include/input.h b/include/input.h index 3285a3ffa2..e99dbb0d33 100644 --- a/include/input.h +++ b/include/input.h @@ -71,7 +71,7 @@ struct stdio_dev; * @param config Input state * @param keycode List of key codes to examine * @param num_keycodes Number of key codes - * @return number of ascii characters sent, or 0 if none, or -1 for an + * Return: number of ascii characters sent, or 0 if none, or -1 for an * internal error */ int input_send_keycodes(struct input_config *config, int keycode[], int count); @@ -90,7 +90,7 @@ int input_send_keycodes(struct input_config *config, int keycode[], int count); * @param config Input state * @param new_keycode New keycode to add/remove * @param release true if this key was released, false if depressed - * @return number of ascii characters sent, or 0 if none, or -1 for an + * Return: number of ascii characters sent, or 0 if none, or -1 for an * internal error */ int input_add_keycode(struct input_config *config, int new_keycode, @@ -112,7 +112,7 @@ int input_add_table(struct input_config *config, int left_keycode, * Test if keys are available to be read * * @param config Input state - * @return 0 if no keys available, 1 if keys are available + * Return: 0 if no keys available, 1 if keys are available */ int input_tstc(struct input_config *config);

@@ -122,7 +122,7 @@ int input_tstc(struct input_config *config); * TODO: U-Boot wants 0 for no key, but Ctrl-@ is a valid key... * * @param config Input state - * @return key, or 0 if no key, or -1 if error + * Return: key, or 0 if no key, or -1 if error */ int input_getc(struct input_config *config);

@@ -130,7 +130,7 @@ int input_getc(struct input_config *config); * Register a new device with stdio and switch to it if wanted * * @param dev Pointer to device - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int input_stdio_register(struct stdio_dev *dev);

@@ -168,7 +168,7 @@ void input_allow_repeats(struct input_config *config, bool allow_repeats); * updating. * * @param config Input state - * @return -1 if no LEDs need updating, other value if they do + * Return: -1 if no LEDs need updating, other value if they do */ int input_leds_changed(struct input_config *config);

@@ -179,7 +179,7 @@ int input_leds_changed(struct input_config *config); * * @param config Input state * @param german true to use German keyboard layout, false for US - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int input_add_tables(struct input_config *config, bool german);

@@ -188,7 +188,7 @@ int input_add_tables(struct input_config *config, bool german); * * @param config Input state * @param leds Initial LED value (INPUT_LED_ mask), 0 suggested - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int input_init(struct input_config *config, int leds);

diff --git a/include/iotrace.h b/include/iotrace.h index 380da1fbc2..7ff2e8332b 100644 --- a/include/iotrace.h +++ b/include/iotrace.h @@ -81,7 +81,7 @@ void iotrace_reset_checksum(void); /** * iotrace_get_checksum() - Get the current checksum value * - * @return currect checksum value + * Return: currect checksum value */ u32 iotrace_get_checksum(void);

@@ -122,7 +122,7 @@ void iotrace_set_enabled(int enable); /** * iotrace_get_enabled() - Get whether iotracing is enabled or not * - * @return true if enabled, false if disabled + * Return: true if enabled, false if disabled */ int iotrace_get_enabled(void);

diff --git a/include/irq.h b/include/irq.h index a0965e4420..1d08cb858d 100644 --- a/include/irq.h +++ b/include/irq.h @@ -147,7 +147,7 @@ struct irq_ops { * * @irq: IRQ description containing device and ID, e.g. previously * returned by irq_get_by_index() - * @return true if valid, false if not + * Return: true if valid, false if not */ static inline bool irq_is_valid(const struct irq *irq) { @@ -169,7 +169,7 @@ int irq_route_pmc_gpio_gpe(struct udevice *dev, uint pmc_gpe_num); * @dev: IRQ device * @irq: Interrupt number to set * @active_low: true if active low, false for active high - * @return 0 if OK, -EINVAL if @irq is invalid + * Return: 0 if OK, -EINVAL if @irq is invalid */ int irq_set_polarity(struct udevice *dev, uint irq, bool active_low);

@@ -177,7 +177,7 @@ int irq_set_polarity(struct udevice *dev, uint irq, bool active_low); * irq_snapshot_polarities() - record IRQ polarities for later restore * * @dev: IRQ device - * @return 0 + * Return: 0 */ int irq_snapshot_polarities(struct udevice *dev);

@@ -185,7 +185,7 @@ int irq_snapshot_polarities(struct udevice *dev); * irq_restore_polarities() - restore IRQ polarities * * @dev: IRQ device - * @return 0 + * Return: 0 */ int irq_restore_polarities(struct udevice *dev);

@@ -195,7 +195,7 @@ int irq_restore_polarities(struct udevice *dev); * Clears the interrupt if pending * * @dev: IRQ device - * @return 0 if interrupt is not pending, 1 if it was (and so has been + * Return: 0 if interrupt is not pending, 1 if it was (and so has been * cleared), -ve on error */ int irq_read_and_clear(struct irq *irq); @@ -224,7 +224,7 @@ struct phandle_2_arg; * @dev: Device containing the phandle * @cells: Phandle info * @irq: A pointer to a irq struct to initialise - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int irq_get_by_phandle(struct udevice *dev, const struct phandle_2_arg *cells, struct irq *irq); @@ -242,7 +242,7 @@ int irq_get_by_phandle(struct udevice *dev, const struct phandle_2_arg *cells, * @index: The index of the irq to request, within the client's list of * irqs. * @irq: A pointer to a irq struct to initialise. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int irq_get_by_index(struct udevice *dev, int index, struct irq *irq);

@@ -258,7 +258,7 @@ int irq_get_by_index(struct udevice *dev, int index, struct irq *irq); * @irq: A pointer to a irq struct to initialise. The caller must * have already initialised any field in this struct which the * irq provider uses to identify the irq. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int irq_request(struct udevice *dev, struct irq *irq);

@@ -267,7 +267,7 @@ int irq_request(struct udevice *dev, struct irq *irq); * * @irq: A irq struct that was previously successfully requested by * irq_request/get_by_*(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int irq_free(struct irq *irq);

@@ -278,7 +278,7 @@ int irq_free(struct irq *irq); * * @type: Type to find * @devp: Returns the device, if found - * @return 0 if OK, -ENODEV if not found, other -ve error if uclass failed to + * Return: 0 if OK, -ENODEV if not found, other -ve error if uclass failed to * probe */ int irq_first_device_type(enum irq_dev_t type, struct udevice **devp); @@ -291,7 +291,7 @@ int irq_first_device_type(enum irq_dev_t type, struct udevice **devp); * * @irq: irq to convert * @acpi_irq: Output ACPI interrupt information - * @return ACPI pin number or -ve on error + * Return: ACPI pin number or -ve on error */ int irq_get_acpi(const struct irq *irq, struct acpi_irq *acpi_irq);

diff --git a/include/key_matrix.h b/include/key_matrix.h index 519722f2d8..e7420b9d79 100644 --- a/include/key_matrix.h +++ b/include/key_matrix.h @@ -66,7 +66,7 @@ int key_matrix_decode(struct key_matrix *config, struct key_matrix_key *keys, * @param config Keyboard matrix config * @param blob FDT blob * @param node Node containing compatible data - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int key_matrix_decode_fdt(struct udevice *dev, struct key_matrix *config);

@@ -77,7 +77,7 @@ int key_matrix_decode_fdt(struct udevice *dev, struct key_matrix *config); * @param rows Number of rows in key matrix * @param cols Number of columns in key matrix * @param ghost_filter Non-zero to enable ghost filtering - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int key_matrix_init(struct key_matrix *config, int rows, int cols, int ghost_filter); diff --git a/include/lcd.h b/include/lcd.h index 9a4c0da5ba..51a79317bb 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -76,42 +76,42 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y); /** * Get the width of the LCD in pixels * - * @return width of LCD in pixels + * Return: width of LCD in pixels */ int lcd_get_pixel_width(void);

/** * Get the height of the LCD in pixels * - * @return height of LCD in pixels + * Return: height of LCD in pixels */ int lcd_get_pixel_height(void);

/** * Get the number of text lines/rows on the LCD * - * @return number of rows + * Return: number of rows */ int lcd_get_screen_rows(void);

/** * Get the number of text columns on the LCD * - * @return number of columns + * Return: number of columns */ int lcd_get_screen_columns(void);

/** * Get the background color of the LCD * - * @return background color value + * Return: background color value */ int lcd_getbgcolor(void);

/** * Get the foreground color of the LCD * - * @return foreground color value + * Return: foreground color value */ int lcd_getfgcolor(void);

diff --git a/include/led.h b/include/led.h index 02766fa56f..8eeb5a7c6d 100644 --- a/include/led.h +++ b/include/led.h @@ -78,7 +78,7 @@ struct led_ops { * * @label: LED label to look up * @devp: Returns the associated device, if found - * @return 0 if found, -ENODEV if not found, other -ve on error + * Return: 0 if found, -ENODEV if not found, other -ve on error */ int led_get_by_label(const char *label, struct udevice **devp);

@@ -87,7 +87,7 @@ int led_get_by_label(const char *label, struct udevice **devp); * * @dev: LED device to change * @state: LED state to set - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int led_set_state(struct udevice *dev, enum led_state_t state);

@@ -95,7 +95,7 @@ int led_set_state(struct udevice *dev, enum led_state_t state); * led_get_state() - get the state of an LED * * @dev: LED device to change - * @return LED state led_state_t, or -ve on error + * Return: LED state led_state_t, or -ve on error */ enum led_state_t led_get_state(struct udevice *dev);

@@ -104,7 +104,7 @@ enum led_state_t led_get_state(struct udevice *dev); * * @dev: LED device to change * @period_ms: LED blink period in milliseconds - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int led_set_period(struct udevice *dev, int period_ms);

diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 9d296f240a..9a6116646d 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -84,7 +84,7 @@ u8 clk_mux_get_parent(struct clk *clk); * @table: array of register values corresponding to the parent index (optional) * @flags: hardware-specific flags * @index: parent clock index - * @return the register value + * Return: the register value */ unsigned int clk_mux_index_to_val(u32 *table, unsigned int flags, u8 index);

@@ -143,7 +143,7 @@ extern const struct clk_ops clk_divider_ops; * * @table: array of register values corresponding to valid dividers * @val: value to convert - * @return the divider + * Return: the divider */ unsigned int clk_divider_get_table_div(const struct clk_div_table *table, unsigned int val); @@ -156,7 +156,7 @@ unsigned int clk_divider_get_table_div(const struct clk_div_table *table, * * @table: array of register values corresponding to valid dividers * @div: requested divider - * @return the register value + * Return: the register value */ unsigned int clk_divider_get_table_val(const struct clk_div_table *table, unsigned int div); @@ -167,7 +167,7 @@ unsigned int clk_divider_get_table_val(const struct clk_div_table *table, * @table: array of valid dividers (optional) * @div: divider to check * @flags: hardware-specific flags - * @return true if the divider is valid, false otherwise + * Return: true if the divider is valid, false otherwise */ bool clk_divider_is_valid_div(const struct clk_div_table *table, unsigned int div, unsigned long flags); @@ -177,7 +177,7 @@ bool clk_divider_is_valid_div(const struct clk_div_table *table, * * @table: array of valid dividers * @div: divider to check - * @return true if the divider is found in the @table array, false otherwise + * Return: true if the divider is found in the @table array, false otherwise */ bool clk_divider_is_valid_table_div(const struct clk_div_table *table, unsigned int div); diff --git a/include/linux/string.h b/include/linux/string.h index 3169c93796..df1c1c5669 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -62,7 +62,7 @@ extern char * strchr(const char *,int); * NULL * @s: string to search * @c: character to search for - * @return position of @c in @s, or end of @s if not found + * Return: position of @c in @s, or end of @s if not found */ const char *strchrnul(const char *s, int c);

@@ -89,7 +89,7 @@ extern __kernel_size_t strnlen(const char *,__kernel_size_t); * * @s: string to search * @reject: strings which cause the search to halt - * @return number of characters at the start of @s which are not in @reject + * Return: number of characters at the start of @s which are not in @reject */ size_t strcspn(const char *s, const char *reject); #endif @@ -136,7 +136,7 @@ void *memchr_inv(const void *, int, size_t); * * @src: data to copy in * @len: number of bytes to copy - * @return allocated buffer with the copied contents, or NULL if not enough + * Return: allocated buffer with the copied contents, or NULL if not enough * memory is available * */ diff --git a/include/linux/zstd.h b/include/linux/zstd.h index 35ba4c90aa..aed20fc3bd 100644 --- a/include/linux/zstd.h +++ b/include/linux/zstd.h @@ -1151,7 +1151,7 @@ struct abuf; * * @in: Input buffer to decompress * @out: Output buffer to hold the results (must be large enough) - * @return size of the decompressed data, or -ve on error + * Return: size of the decompressed data, or -ve on error */ int zstd_decompress(struct abuf *in, struct abuf *out);

diff --git a/include/log.h b/include/log.h index e0e12ce194..ce48d51446 100644 --- a/include/log.h +++ b/include/log.h @@ -660,7 +660,7 @@ int log_remove_filter(const char *drv_name, int filter_num); * * @drv: Driver of device to enable * @enable: true to enable, false to disable - * @return 0 if OK, -ENOENT if the driver was not found + * Return: 0 if OK, -ENOENT if the driver was not found */ int log_device_set_enable(struct log_driver *drv, bool enable);

diff --git a/include/mailbox-uclass.h b/include/mailbox-uclass.h index 3c60c76506..866ca0aa8d 100644 --- a/include/mailbox-uclass.h +++ b/include/mailbox-uclass.h @@ -62,7 +62,7 @@ struct mbox_ops { * * @chan: The channel to send to the message to. * @data: A pointer to the message to send. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int (*send)(struct mbox_chan *chan, const void *data); /** @@ -73,7 +73,7 @@ struct mbox_ops { * * @chan: The channel to receive to the message from. * @data: A pointer to the buffer to hold the received message. - * @return 0 if OK, -ENODATA if no message was available, or a negative + * Return: 0 if OK, -ENODATA if no message was available, or a negative * error code. */ int (*recv)(struct mbox_chan *chan, void *data); diff --git a/include/mailbox.h b/include/mailbox.h index 93f4715e16..323b6c2bc5 100644 --- a/include/mailbox.h +++ b/include/mailbox.h @@ -76,7 +76,7 @@ struct mbox_chan { * @index: The index of the mailbox channel to request, within the * client's list of channels. * @chan A pointer to a channel object to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int mbox_get_by_index(struct udevice *dev, int index, struct mbox_chan *chan);

@@ -94,7 +94,7 @@ int mbox_get_by_index(struct udevice *dev, int index, struct mbox_chan *chan); * @name: The name of the mailbox channel to request, within the client's * list of channels. * @chan A pointer to a channel object to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int mbox_get_by_name(struct udevice *dev, const char *name, struct mbox_chan *chan); @@ -104,7 +104,7 @@ int mbox_get_by_name(struct udevice *dev, const char *name, * * @chan: A channel object that was previously successfully requested by * calling mbox_get_by_*(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int mbox_free(struct mbox_chan *chan);

@@ -120,7 +120,7 @@ int mbox_free(struct mbox_chan *chan); * the memory region pointed at by @data is determined by the * mailbox provider. Providers that solely transfer notifications * will ignore this parameter. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int mbox_send(struct mbox_chan *chan, const void *data);

@@ -139,7 +139,7 @@ int mbox_send(struct mbox_chan *chan, const void *data); * notifications will ignore this parameter. * @timeout_us: The maximum time to wait for a message to be available, in * micro-seconds. A value of 0 does not wait at all. - * @return 0 if OK, -ENODATA if no message was available, or a negative error + * Return: 0 if OK, -ENODATA if no message was available, or a negative error * code. */ int mbox_recv(struct mbox_chan *chan, void *data, ulong timeout_us); diff --git a/include/memalign.h b/include/memalign.h index 44f4a86241..f67f0a74f2 100644 --- a/include/memalign.h +++ b/include/memalign.h @@ -103,7 +103,7 @@ * * @size: Minimum number of bytes to allocate * - * @return pointer to new memory region, or NULL if there is no more memory + * Return: pointer to new memory region, or NULL if there is no more memory * available. */ static inline void *malloc_cache_aligned(size_t size) diff --git a/include/membuff.h b/include/membuff.h index c992067133..21051b0c54 100644 --- a/include/membuff.h +++ b/include/membuff.h @@ -62,7 +62,7 @@ void membuff_purge(struct membuff *mb); * @maxlen: the number of bytes we want to write * @update: true to update the membuff as if the write happened, false to not * @data: the address data can be written to - * @return number of bytes which can be written + * Return: number of bytes which can be written */ int membuff_putraw(struct membuff *mb, int maxlen, bool update, char **data);

@@ -80,7 +80,7 @@ int membuff_putraw(struct membuff *mb, int maxlen, bool update, char **data); * @update: true to update the membuff as if the bytes have been read (use * false to check bytes without reading them) * @data: returns address of data in input membuff - * @return the number of bytes available at *@data + * Return: the number of bytes available at *@data */ int membuff_getraw(struct membuff *mb, int maxlen, bool update, char **data);

@@ -89,14 +89,14 @@ int membuff_getraw(struct membuff *mb, int maxlen, bool update, char **data); * * @mb: membuff to adjust * @ch: byte to write - * @return true on success, false if membuff is full + * Return: true on success, false if membuff is full */ bool membuff_putbyte(struct membuff *mb, int ch);

/** * @mb: membuff to adjust * membuff_getbyte() - Read a byte from the membuff - * @return the byte read, or -1 if the membuff is empty + * Return: the byte read, or -1 if the membuff is empty */ int membuff_getbyte(struct membuff *mb);

@@ -107,7 +107,7 @@ int membuff_getbyte(struct membuff *mb); * removing it from the membuff. * * @mb: membuff to adjust - * @return the byte peeked, or -1 if the membuff is empty + * Return: the byte peeked, or -1 if the membuff is empty */ int membuff_peekbyte(struct membuff *mb);

@@ -120,7 +120,7 @@ int membuff_peekbyte(struct membuff *mb); * @mb: membuff to adjust * @Buff: address of membuff to transfer bytes to * @maxlen: maximum number of bytes to read - * @return the number of bytes read + * Return: the number of bytes read */ int membuff_get(struct membuff *mb, char *buff, int maxlen);

@@ -133,7 +133,7 @@ int membuff_get(struct membuff *mb, char *buff, int maxlen); * @mb: membuff to adjust * @data: the data to write * @length: number of bytes to write from 'data' - * @return the number of bytes added + * Return: the number of bytes added */ int membuff_put(struct membuff *mb, const char *buff, int length);

@@ -141,7 +141,7 @@ int membuff_put(struct membuff *mb, const char *buff, int length); * membuff_isempty() - check if a membuff is empty * * @mb: membuff to check - * @return true if empty, else false + * Return: true if empty, else false */ bool membuff_isempty(struct membuff *mb);

@@ -149,7 +149,7 @@ bool membuff_isempty(struct membuff *mb); * membuff_avail() - check available data in a membuff * * @mb: membuff to check - * @return number of bytes of data available + * Return: number of bytes of data available */ int membuff_avail(struct membuff *mb);

@@ -159,7 +159,7 @@ int membuff_avail(struct membuff *mb); * Note that a membuff can only old data up to one byte less than its size. * * @mb: membuff to check - * @return total size + * Return: total size */ int membuff_size(struct membuff *mb);

@@ -170,7 +170,7 @@ int membuff_size(struct membuff *mb); * possible * * @mb: membuff to adjust - * @return true on success + * Return: true on success */ bool membuff_makecontig(struct membuff *mb);

@@ -178,7 +178,7 @@ bool membuff_makecontig(struct membuff *mb); * membuff_free() - find the number of bytes that can be written to a membuff * * @mb: membuff to check - * @return returns the number of bytes free in a membuff + * Return: returns the number of bytes free in a membuff */ int membuff_free(struct membuff *mb);

@@ -192,7 +192,7 @@ int membuff_free(struct membuff *mb); * @mb: membuff to adjust * @str: Place to put the line * @maxlen: Maximum line length (excluding terminator) - * @return number of bytes read (including terminator) if a line has been + * Return: number of bytes read (including terminator) if a line has been * read, 0 if nothing was there */ int membuff_readline(struct membuff *mb, char *str, int maxlen, int minch); @@ -205,7 +205,7 @@ int membuff_readline(struct membuff *mb, char *str, int maxlen, int minch); * @mb: membuff to adjust * @by: Number of bytes to increase the size by * @max: Maximum size to allow - * @return 0 if the expand succeeded, -ENOMEM if not enough memory, -E2BIG + * Return: 0 if the expand succeeded, -ENOMEM if not enough memory, -E2BIG * if the the size would exceed @max */ int membuff_extend_by(struct membuff *mb, int by, int max); @@ -231,7 +231,7 @@ void membuff_uninit(struct membuff *mb); * * @mb: membuff to init * @size: size of membuff to create - * @return 0 if OK, -ENOMEM if out of memory + * Return: 0 if OK, -ENOMEM if out of memory */ int membuff_new(struct membuff *mb, int size);

diff --git a/include/menu.h b/include/menu.h index 9ab9b21ebb..ad5859437e 100644 --- a/include/menu.h +++ b/include/menu.h @@ -30,7 +30,7 @@ int menu_default_choice(struct menu *m, void **choice); * * @bootdelay: Delay to wait before running the default menu option (0 to run * the entry immediately) - * @return If it returns, it always returns -1 to indicate that the boot should + * Return: If it returns, it always returns -1 to indicate that the boot should * be aborted and the command prompt should be provided */ int menu_show(int bootdelay); diff --git a/include/miiphy.h b/include/miiphy.h index 77a0035958..235ae066dd 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -165,7 +165,7 @@ void dm_mdio_probe_devices(void); * @ethdev: ethernet device to connect to the PHY * @interface: MAC-PHY protocol * - * @return pointer to phy_device, or 0 on error + * Return: pointer to phy_device, or 0 on error */ struct phy_device *dm_mdio_phy_connect(struct udevice *mdiodev, int phyaddr, struct udevice *ethdev, @@ -179,7 +179,7 @@ struct phy_device *dm_mdio_phy_connect(struct udevice *mdiodev, int phyaddr, * * @ethdev: ethernet device * - * @return pointer to phy_device, or 0 on error + * Return: pointer to phy_device, or 0 on error */ struct phy_device *dm_eth_phy_connect(struct udevice *ethdev);

diff --git a/include/mmc.h b/include/mmc.h index 244d2dc592..6bdcce881d 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -390,7 +390,7 @@ struct mmc_uclass_priv { * will be available. * * @dev: Device - * @return associated mmc struct pointer if available, else NULL + * Return: associated mmc struct pointer if available, else NULL */ struct mmc *mmc_get_mmc_dev(const struct udevice *dev);

@@ -768,7 +768,7 @@ struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); * @dev: MMC device to set up * @mmc: MMC struct * @cfg: MMC configuration - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mmc_bind(struct udevice *dev, struct mmc *mmc, const struct mmc_config *cfg); @@ -778,7 +778,7 @@ void mmc_destroy(struct mmc *mmc); * mmc_unbind() - Unbind a MMC device's child block device * * @dev: MMC device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mmc_unbind(struct udevice *dev); int mmc_initialize(struct bd_info *bis); @@ -793,7 +793,7 @@ int mmc_deinit(struct mmc *mmc); * * @dev: MMC device * @cfg: MMC configuration - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg);

@@ -803,7 +803,7 @@ int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg); * * @dev: MMC device * @cfg: MMC configuration - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mmc_pwrseq_get_power(struct udevice *dev, struct mmc_config *cfg); #endif @@ -814,7 +814,7 @@ int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); * mmc_voltage_to_mv() - Convert a mmc_voltage in mV * * @voltage: The mmc_voltage to convert - * @return the value in mV if OK, -EINVAL on error (invalid mmc_voltage value) + * Return: the value in mV if OK, -EINVAL on error (invalid mmc_voltage value) */ int mmc_voltage_to_mv(enum mmc_voltage voltage);

@@ -823,7 +823,7 @@ int mmc_voltage_to_mv(enum mmc_voltage voltage); * @mmc: MMC struct * @clock: bus frequency in Hz * @disable: flag indicating if the clock must on or off - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int mmc_set_clock(struct mmc *mmc, uint clock, bool disable);

@@ -837,7 +837,7 @@ void print_mmc_devices(char separator); /** * get_mmc_num() - get the total MMC device number * - * @return 0 if there is no MMC device, else the number of devices + * Return: 0 if there is no MMC device, else the number of devices */ int get_mmc_num(void); int mmc_switch_part(struct mmc *mmc, unsigned int part_num); @@ -898,7 +898,7 @@ int mmc_set_bkops_enable(struct mmc *mmc); * * @param mmc Pointer to a MMC device struct * @param quiet Be quiet, do not print error messages when card is not detected. - * @return 0 on success, <0 on error. + * Return: 0 on success, <0 on error. */ int mmc_get_op_cond(struct mmc *mmc, bool quiet);

@@ -909,7 +909,7 @@ int mmc_get_op_cond(struct mmc *mmc, bool quiet); * initializatin. * * @param mmc Pointer to a MMC device struct - * @return 0 on success, <0 on error. + * Return: 0 on success, <0 on error. */ int mmc_start_init(struct mmc *mmc);

@@ -956,7 +956,7 @@ int mmc_get_env_dev(void); * mmc_get_blk_desc() - Get the block descriptor for an MMC device * * @mmc: MMC device - * @return block device if found, else NULL + * Return: block device if found, else NULL */ struct blk_desc *mmc_get_blk_desc(struct mmc *mmc);

diff --git a/include/net.h b/include/net.h index cec8c98618..b02e4f630c 100644 --- a/include/net.h +++ b/include/net.h @@ -67,7 +67,7 @@ struct in_addr { * @flag: Command flags (CMD_FLAG_...) * @argc: Number of arguments * @argv: List of arguments - * @return result (see enum command_ret_t) + * Return: result (see enum command_ret_t) */ int do_tftpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);

@@ -274,7 +274,7 @@ int eth_get_dev_index(void); /* get the device index */ * @base_name: Base name for variable, typically "eth" * @index: Index of interface being updated (>=0) * @enetaddr: Pointer to MAC address to put into the variable - * @return 0 if OK, other value on error + * Return: 0 if OK, other value on error */ int eth_env_set_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr); @@ -628,7 +628,7 @@ void net_set_udp_header(uchar *pkt, struct in_addr dest, int dport, * * @addr: Address to check (must be 16-bit aligned) * @nbytes: Number of bytes to check (normally a multiple of 2) - * @return 16-bit IP checksum + * Return: 16-bit IP checksum */ unsigned compute_ip_checksum(const void *addr, unsigned nbytes);

@@ -638,7 +638,7 @@ unsigned compute_ip_checksum(const void *addr, unsigned nbytes); * @offset: Offset of first sum (if odd we do a byte-swap) * @sum: First checksum * @new_sum: New checksum to add - * @return updated 16-bit IP checksum + * Return: updated 16-bit IP checksum */ unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum);

@@ -649,7 +649,7 @@ unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum); * * @addr: Address to check (must be 16-bit aligned) * @nbytes: Number of bytes to check (normally a multiple of 2) - * @return true if the checksum matches, false if not + * Return: true if the checksum matches, false if not */ int ip_checksum_ok(const void *addr, unsigned nbytes);

@@ -917,7 +917,7 @@ int net_parse_bootfile(struct in_addr *ipaddr, char *filename, int max_len); * @param interface - the DFU medium name - e.g. "mmc" * @param devstring - the DFU medium number - e.g. "1" * - * @return - 0 on success, other value on failure + * Return: - 0 on success, other value on failure */ int update_tftp(ulong addr, char *interface, char *devstring);

@@ -927,7 +927,7 @@ int update_tftp(ulong addr, char *interface, char *devstring); * @var: Environment variable to convert. The value of this variable must be * in the format format a.b.c.d, where each value is a decimal number from * 0 to 255 - * @return IP address, or 0 if invalid + * Return: IP address, or 0 if invalid */ static inline struct in_addr env_get_ip(char *var) { diff --git a/include/net/dsa.h b/include/net/dsa.h index 1b1068cd88..9fa9d4e785 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -130,7 +130,7 @@ struct dsa_pdata { * @tailroom: Size, in bytes, of tailroom needed for the DSA tag. * Total headroom and tailroom size should not exceed * DSA_MAX_OVR. - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dsa_set_tagging(struct udevice *dev, ushort headroom, ushort tailroom);

@@ -142,7 +142,7 @@ int dsa_set_tagging(struct udevice *dev, ushort headroom, ushort tailroom); * Can be called at driver probe time or later. * * @dev: DSA device pointer - * @return Master Eth 'udevice' pointer if OK, NULL on error + * Return: Master Eth 'udevice' pointer if OK, NULL on error */ struct udevice *dsa_get_master(struct udevice *dev);

@@ -153,7 +153,7 @@ struct udevice *dsa_get_master(struct udevice *dev); * * @dev: DSA switch udevice pointer * @port: Port index - * @return OF node reference if OK, NULL on error + * Return: OF node reference if OK, NULL on error */ ofnode dsa_port_get_ofnode(struct udevice *dev, int port);

@@ -164,7 +164,7 @@ ofnode dsa_port_get_ofnode(struct udevice *dev, int port); * Can be called at driver probe time or later. * * @pdev: DSA port device pointer - * @return 'dsa_port_pdata' pointer if OK, NULL on error + * Return: 'dsa_port_pdata' pointer if OK, NULL on error */ static inline struct dsa_port_pdata * dsa_port_get_pdata(struct udevice *pdev) diff --git a/include/net/pcap.h b/include/net/pcap.h index 512ba982f1..6184bf53a8 100644 --- a/include/net/pcap.h +++ b/include/net/pcap.h @@ -10,7 +10,7 @@ * @paddr physicaly memory address to store buffer * @size maximum size of capture file in memory * - * @return 0 on success, -ERROR on error + * Return: 0 on success, -ERROR on error */ int pcap_init(phys_addr_t paddr, unsigned long size);

@@ -19,28 +19,28 @@ int pcap_init(phys_addr_t paddr, unsigned long size); * * @start if true, start capture if false stop capture * - * @return 0 on success, -ERROR on error + * Return: 0 on success, -ERROR on error */ int pcap_start_stop(bool start);

/** * pcap_clear() - clear pcap capture buffer and statistics * - * @return 0 on success, -ERROR on error + * Return: 0 on success, -ERROR on error */ int pcap_clear(void);

/** * pcap_print_status() - print status of pcap capture * - * @return 0 on success, -ERROR on error + * Return: 0 on success, -ERROR on error */ int pcap_print_status(void);

/** * pcap_active() - check if pcap is enabled * - * @return TRUE if active, FALSE if not. + * Return: TRUE if active, FALSE if not. */ bool pcap_active(void);

@@ -50,6 +50,6 @@ bool pcap_active(void); * @packet: packet to post * @len: packet length in bytes * @outgoing packet direction (outgoing/incoming) - * @return 0 on success, -ERROR on error + * Return: 0 on success, -ERROR on error */ int pcap_post(const void *packet, size_t len, bool outgoing); diff --git a/include/ns16550.h b/include/ns16550.h index bef2071998..3d9002d9f1 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -237,7 +237,7 @@ void ns16550_reinit(struct ns16550 *com_port, int baud_divisor); * @port: UART port * @clock: UART input clock speed in Hz * @baudrate: Required baud rate - * @return baud rate divisor that should be used + * Return: baud rate divisor that should be used */ int ns16550_calc_divisor(struct ns16550 *port, int clock, int baudrate);

@@ -257,7 +257,7 @@ int ns16550_serial_of_to_plat(struct udevice *dev); * ns16550_serial_probe() - probe a serial port * * This sets up the serial port ready for use, except for the baud rate - * @return 0, or -ve on error + * Return: 0, or -ve on error */ int ns16550_serial_probe(struct udevice *dev);

diff --git a/include/of_live.h b/include/of_live.h index b8561f5b1f..b2b9679ae8 100644 --- a/include/of_live.h +++ b/include/of_live.h @@ -16,7 +16,7 @@ struct device_node; * * @fdt_blob: Input tree to convert * @rootp: Returns live tree that was created - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int of_live_build(const void *fdt_blob, struct device_node **rootp);

diff --git a/include/p2sb.h b/include/p2sb.h index ddbc8d5e14..00acc8d935 100644 --- a/include/p2sb.h +++ b/include/p2sb.h @@ -63,7 +63,7 @@ struct p2sb_ops { * * @dev: P2SB device * @hide: true to hide the device, false to show it - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int p2sb_set_hide(struct udevice *dev, bool hide);

@@ -74,7 +74,7 @@ int p2sb_set_hide(struct udevice *dev, bool hide); * * @dev: Device to read from * @offset: Offset within device to read - * @return value read + * Return: value read */ uint pcr_read32(struct udevice *dev, uint offset); uint pcr_read16(struct udevice *dev, uint offset); @@ -149,7 +149,7 @@ static inline void pcr_clrbits8(struct udevice *dev, uint offset, uint clr) * * @dev: Child device (whose parent is UCLASS_P2SB) * @portid: Port ID of child device - * @return 0 if OK, -ENODEV is the p2sb device could not be found + * Return: 0 if OK, -ENODEV is the p2sb device could not be found */ int p2sb_set_port_id(struct udevice *dev, int portid);

@@ -157,7 +157,7 @@ int p2sb_set_port_id(struct udevice *dev, int portid); * p2sb_get_port_id() - Get the port ID for a p2sb child device * * @dev: Child device (whose parent is UCLASS_P2SB) - * @return Port ID of that child + * Return: Port ID of that child */ int p2sb_get_port_id(struct udevice *dev);

@@ -166,7 +166,7 @@ int p2sb_get_port_id(struct udevice *dev); * * @dev: Child device (whose parent is UCLASS_P2SB) * @offset: Offset within that child's address space - * @return pointer to that offset within the child's address space + * Return: pointer to that offset within the child's address space */ void *pcr_reg_address(struct udevice *dev, uint offset);

diff --git a/include/panel.h b/include/panel.h index cd596d48c0..ab417bc91e 100644 --- a/include/panel.h +++ b/include/panel.h @@ -43,7 +43,7 @@ struct panel_ops { * * @dev: Panel device containing the backlight to enable * @enable: true to enable the backlight, false to dis - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int panel_enable_backlight(struct udevice *dev);

@@ -52,7 +52,7 @@ int panel_enable_backlight(struct udevice *dev); * * @dev: Panel device containing the backlight to update * @percent: Brightness value (0 to 100, or BACKLIGHT_... value) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int panel_set_backlight(struct udevice *dev, int percent);

@@ -60,7 +60,7 @@ int panel_set_backlight(struct udevice *dev, int percent); * panel_get_display_timing() - Get display timings from panel. * * @dev: Panel device containing the display timings - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int panel_get_display_timing(struct udevice *dev, struct display_timing *timing); diff --git a/include/part.h b/include/part.h index b8d8e1ff0d..53cfbdd876 100644 --- a/include/part.h +++ b/include/part.h @@ -97,7 +97,7 @@ struct disk_part { * @ifname: Interface name (e.g. "ide", "scsi") * @dev: Device number (0 for first device on that interface, 1 for * second, etc. - * @return pointer to the block device, or NULL if not available, or an + * Return: pointer to the block device, or NULL if not available, or an * error occurred. */ struct blk_desc *blk_get_dev(const char *ifname, int dev); @@ -142,7 +142,7 @@ void dev_print(struct blk_desc *dev_desc); * and hardware partition number (e.g. "2.4") for devices that * support it (currently only MMC). * @dev_desc: Returns a pointer to the block device on success - * @return block device number (local to the interface), or -1 on error + * Return: block device number (local to the interface), or -1 on error */ int blk_get_device_by_str(const char *ifname, const char *dev_str, struct blk_desc **dev_desc); @@ -177,7 +177,7 @@ int blk_get_device_by_str(const char *ifname, const char *dev_str, * @allow_whole_dev: true to allow the user to select partition 0 * (which means the whole device), false to require a valid * partition number >= 1 - * @return partition number, or -1 on error + * Return: partition number, or -1 on error * */ int blk_get_device_part_str(const char *ifname, const char *dev_part_str, @@ -193,7 +193,7 @@ int blk_get_device_part_str(const char *ifname, const char *dev_part_str, * @param info - returns the disk partition info * @param part_type - only search in partitions of this type * - * @return - the partition number on match (starting on 1), -1 on no match, + * Return: - the partition number on match (starting on 1), -1 on no match, * otherwise error */ int part_get_info_by_name_type(struct blk_desc *dev_desc, const char *name, @@ -207,7 +207,7 @@ int part_get_info_by_name_type(struct blk_desc *dev_desc, const char *name, * @param gpt_name - the specified table entry name * @param info - returns the disk partition info * - * @return - the partition number on match (starting on 1), -1 on no match, + * Return: - the partition number on match (starting on 1), -1 on no match, * otherwise error */ int part_get_info_by_name(struct blk_desc *dev_desc, @@ -230,7 +230,7 @@ int part_get_info_by_name(struct blk_desc *dev_desc, * @param[in] allow_whole_dev true to allow the user to select partition 0 * (which means the whole device), false to require a valid * partition number >= 1 - * @return the partition number on success, or negative errno on error + * Return: the partition number on success, or negative errno on error */ int part_get_info_by_dev_and_name_or_num(const char *dev_iface, const char *dev_part_str, @@ -352,7 +352,7 @@ struct part_driver { * @param gpt_h - pointer to GPT header representation * @param gpt_e - pointer to GPT partition table entries * - * @return - zero on success, otherwise error + * Return: - zero on success, otherwise error */ int write_gpt_table(struct blk_desc *dev_desc, gpt_header *gpt_h, gpt_entry *gpt_e); @@ -366,7 +366,7 @@ int write_gpt_table(struct blk_desc *dev_desc, * @param partitions - list of partitions * @param parts - number of partitions * - * @return zero on success + * Return: zero on success */ int gpt_fill_pte(struct blk_desc *dev_desc, gpt_header *gpt_h, gpt_entry *gpt_e, @@ -380,7 +380,7 @@ int gpt_fill_pte(struct blk_desc *dev_desc, * @param str_guid - disk guid string representation * @param parts_count - number of partitions * - * @return - error on str_guid conversion error + * Return: - error on str_guid conversion error */ int gpt_fill_header(struct blk_desc *dev_desc, gpt_header *gpt_h, char *str_guid, int parts_count); @@ -393,7 +393,7 @@ int gpt_fill_header(struct blk_desc *dev_desc, gpt_header *gpt_h, * @param partitions - list of partitions * @param parts - number of partitions * - * @return zero on success + * Return: zero on success */ int gpt_restore(struct blk_desc *dev_desc, char *str_disk_guid, struct disk_partition *partitions, const int parts_count); @@ -404,7 +404,7 @@ int gpt_restore(struct blk_desc *dev_desc, char *str_disk_guid, * @param dev_desc - block device descriptor * @param buf - buffer which contains the MBR and Primary GPT info * - * @return - '0' on success, otherwise error + * Return: - '0' on success, otherwise error */ int is_valid_gpt_buf(struct blk_desc *dev_desc, void *buf);

@@ -414,7 +414,7 @@ int is_valid_gpt_buf(struct blk_desc *dev_desc, void *buf); * @param dev_desc - block device descriptor * @param buf - buffer which contains the MBR and Primary GPT info * - * @return - '0' on success, otherwise error + * Return: - '0' on success, otherwise error */ int write_mbr_and_gpt_partitions(struct blk_desc *dev_desc, void *buf);

@@ -428,7 +428,7 @@ int write_mbr_and_gpt_partitions(struct blk_desc *dev_desc, void *buf); * @param gpt_head - pointer to GPT header data read from medium * @param gpt_pte - pointer to GPT partition table enties read from medium * - * @return - '0' on success, otherwise error + * Return: - '0' on success, otherwise error */ int gpt_verify_headers(struct blk_desc *dev_desc, gpt_header *gpt_head, gpt_entry **gpt_pte); @@ -447,7 +447,7 @@ int gpt_verify_headers(struct blk_desc *dev_desc, gpt_header *gpt_head, * @param gpt_head - pointer to GPT header data read from medium * @param gpt_pte - pointer to GPT partition table enties read from medium * - * @return - '0' on success, otherwise error + * Return: - '0' on success, otherwise error */ int gpt_verify_partitions(struct blk_desc *dev_desc, struct disk_partition *partitions, int parts, @@ -463,7 +463,7 @@ int gpt_verify_partitions(struct blk_desc *dev_desc, * @param dev_desc - block device descriptor * @param guid - pre-allocated string in which to return the GUID * - * @return - '0' on success, otherwise error + * Return: - '0' on success, otherwise error */ int get_disk_guid(struct blk_desc *dev_desc, char *guid);

@@ -475,7 +475,7 @@ int get_disk_guid(struct blk_desc *dev_desc, char *guid); * * @param buf - buffer which contains the MBR * - * @return - '0' on success, otherwise error + * Return: - '0' on success, otherwise error */ int is_valid_dos_buf(void *buf);

@@ -485,7 +485,7 @@ int is_valid_dos_buf(void *buf); * @param dev_desc - block device descriptor * @param buf - buffer which contains the MBR * - * @return - '0' on success, otherwise error + * Return: - '0' on success, otherwise error */ int write_mbr_sector(struct blk_desc *dev_desc, void *buf);

@@ -500,7 +500,7 @@ int layout_mbr_partitions(struct disk_partition *p, int count, /** * part_driver_get_count() - get partition driver count * - * @return - number of partition drivers + * Return: - number of partition drivers */ static inline int part_driver_get_count(void) { @@ -510,7 +510,7 @@ static inline int part_driver_get_count(void) /** * part_driver_get_first() - get first partition driver * - * @return - pointer to first partition driver on success, otherwise NULL + * Return: - pointer to first partition driver on success, otherwise NULL */ static inline struct part_driver *part_driver_get_first(void) { diff --git a/include/pch.h b/include/pch.h index 620566819c..d2b6862037 100644 --- a/include/pch.h +++ b/include/pch.h @@ -110,7 +110,7 @@ struct pch_ops { * * @dev: PCH device to check * @sbasep: Returns address of SPI base if available, else 0 - * @return 0 if OK, -ve on error (e.g. there is no SPI base) + * Return: 0 if OK, -ve on error (e.g. there is no SPI base) */ int pch_get_spi_base(struct udevice *dev, ulong *sbasep);

@@ -120,7 +120,7 @@ int pch_get_spi_base(struct udevice *dev, ulong *sbasep); * @dev: PCH device to adjust * @protect: true to protect, false to unprotect * - * @return 0 on success, -ENOSYS if not implemented + * Return: 0 on success, -ENOSYS if not implemented */ int pch_set_spi_protect(struct udevice *dev, bool protect);

@@ -129,7 +129,7 @@ int pch_set_spi_protect(struct udevice *dev, bool protect); * * @dev: PCH device to check * @gbasep: Returns address of GPIO base if available, else 0 - * @return 0 if OK, -ve on error (e.g. there is no GPIO base) + * Return: 0 if OK, -ve on error (e.g. there is no GPIO base) */ int pch_get_gpio_base(struct udevice *dev, u32 *gbasep);

@@ -138,7 +138,7 @@ int pch_get_gpio_base(struct udevice *dev, u32 *gbasep); * * @dev: PCH device to check * @iobasep: Returns address of IO base if available, else 0 - * @return 0 if OK, -ve on error (e.g. there is no IO base) + * Return: 0 if OK, -ve on error (e.g. there is no IO base) */ int pch_get_io_base(struct udevice *dev, u32 *iobasep);

@@ -154,7 +154,7 @@ int pch_get_io_base(struct udevice *dev, u32 *iobasep); * @req: PCH request ID * @data: Input/output data * @size: Size of input data (and maximum size of output data) - * @return size of output data on sucesss, -ve on error + * Return: size of output data on sucesss, -ve on error */ int pch_ioctl(struct udevice *dev, ulong req, void *data, int size);

diff --git a/include/pci.h b/include/pci.h index ad1171b0a2..9e7910b271 100644 --- a/include/pci.h +++ b/include/pci.h @@ -812,7 +812,7 @@ void pciauto_config_init(struct pci_controller *hose); * @size: Amount of bytes to allocate * @bar: Returns the PCI bus address of the allocated resource * @supports_64bit: Whether to allow allocations above the 32-bit boundary - * @return 0 if successful, -1 on failure + * Return: 0 if successful, -1 on failure */ int pciauto_region_allocate(struct pci_region *res, pci_size_t size, pci_addr_t *bar, bool supports_64bit); @@ -898,7 +898,7 @@ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, * @hose: PCI hose to use * @dev: PCI device to inspect * @barnum: BAR number (0-5) - * @return address of the bar, masking out any control bits + * Return: address of the bar, masking out any control bits * */ u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);

@@ -998,7 +998,7 @@ struct dm_pci_ops { * dm_pci_get_bdf() - Get the BDF value for a device * * @dev: Device to check - * @return bus/device/function value (see PCI_BDF()) + * Return: bus/device/function value (see PCI_BDF()) */ pci_dev_t dm_pci_get_bdf(const struct udevice *dev);

@@ -1015,7 +1015,7 @@ pci_dev_t dm_pci_get_bdf(const struct udevice *dev); * driver interface. * * @bus: Bus containing devices to bind - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_bind_bus_devices(struct udevice *bus);

@@ -1030,7 +1030,7 @@ int pci_bind_bus_devices(struct udevice *bus); * devices are mapped into memory and I/O space ready for use. * * @bus: Bus containing devices to bind - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_auto_config_devices(struct udevice *bus);

@@ -1039,7 +1039,7 @@ int pci_auto_config_devices(struct udevice *bus); * * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @devp: Returns the device for this address, if found - * @return 0 if OK, -ENODEV if not found + * Return: 0 if OK, -ENODEV if not found */ int dm_pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp);

@@ -1048,7 +1048,7 @@ int dm_pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp); * * @find_devfn: PCI device address (device and function only) * @devp: Returns the device for this address, if found - * @return 0 if OK, -ENODEV if not found + * Return: 0 if OK, -ENODEV if not found */ int pci_bus_find_devfn(const struct udevice *bus, pci_dev_t find_devfn, struct udevice **devp); @@ -1062,7 +1062,7 @@ int pci_bus_find_devfn(const struct udevice *bus, pci_dev_t find_devfn, * * @devp: Set to the first available device, or NULL if no more are left * or we got an error - * @return 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe) + * Return: 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe) */ int pci_find_first_device(struct udevice **devp);

@@ -1074,7 +1074,7 @@ int pci_find_first_device(struct udevice **devp); * * @devp: On entry, the last device returned. Set to the next available * device, or NULL if no more are left or we got an error - * @return 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe) + * Return: 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe) */ int pci_find_next_device(struct udevice **devp);

@@ -1082,7 +1082,7 @@ int pci_find_next_device(struct udevice **devp); * pci_get_ff() - Returns a mask for the given access size * * @size: Access size - * @return 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for + * Return: 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for * PCI_SIZE_32 */ int pci_get_ff(enum pci_size_t size); @@ -1097,7 +1097,7 @@ int pci_get_ff(enum pci_size_t size); * parameter is decremented for each non-matching device so * can be called repeatedly. * @devp: Returns matching device if found - * @return 0 if found, -ENODEV if not + * Return: 0 if found, -ENODEV if not */ int pci_bus_find_devices(struct udevice *bus, const struct pci_device_id *ids, int *indexp, struct udevice **devp); @@ -1109,7 +1109,7 @@ int pci_bus_find_devices(struct udevice *bus, const struct pci_device_id *ids, * @index: Index number of device to find, 0 for the first match, 1 for * the second, etc. * @devp: Returns matching device if found - * @return 0 if found, -ENODEV if not + * Return: 0 if found, -ENODEV if not */ int pci_find_device_id(const struct pci_device_id *ids, int index, struct udevice **devp); @@ -1126,7 +1126,7 @@ int pci_find_device_id(const struct pci_device_id *ids, int index, * * @hose: PCI hose to scan * @bdf: PCI bus address to scan (PCI_BUS(bdf) is the bus number) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_pci_hose_probe_bus(struct udevice *bus);

@@ -1141,7 +1141,7 @@ int dm_pci_hose_probe_bus(struct udevice *bus); * @offset: Register offset to read * @valuep: Place to put the returned value * @size: Access size - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_bus_read_config(const struct udevice *bus, pci_dev_t bdf, int offset, unsigned long *valuep, enum pci_size_t size); @@ -1154,7 +1154,7 @@ int pci_bus_read_config(const struct udevice *bus, pci_dev_t bdf, int offset, * @offset: Register offset to write * @value: Value to write * @size: Access size - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset, unsigned long value, enum pci_size_t size); @@ -1169,7 +1169,7 @@ int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset, * @offset: Register offset to update * @clr: Bits to clear * @set: Bits to set - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_bus_clrset_config32(struct udevice *bus, pci_dev_t bdf, int offset, u32 clr, u32 set); @@ -1271,7 +1271,7 @@ int pci_generic_mmap_read_config( * * @pdev: Physical Function udevice handle * @vf_en: Number of Virtual Function devices to enable - * @return 0 on success, -ve on error + * Return: 0 on success, -ve on error */ int pci_sriov_init(struct udevice *pdev, int vf_en);

@@ -1279,7 +1279,7 @@ int pci_sriov_init(struct udevice *pdev, int vf_en); * pci_sriov_get_totalvfs() - Get total available Virtual Function devices * * @pdev: Physical Function udevice handle - * @return count on success, -ve on error + * Return: count on success, -ve on error */ int pci_sriov_get_totalvfs(struct udevice *pdev); #endif @@ -1335,7 +1335,7 @@ static inline int pci_read_config_byte(pci_dev_t pcidev, int offset, * devices are mapped into memory and I/O space ready for use. * * @dev: Device to configure - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_pciauto_config_device(struct udevice *dev);

@@ -1349,7 +1349,7 @@ int dm_pciauto_config_device(struct udevice *dev); * @value: Value to transform (32-bit value read from @offset & ~3) * @offset: Register offset that was read * @size: Required size of the result - * @return the value that would have been obtained if the read had been + * Return: the value that would have been obtained if the read had been * performed at the given offset with the correct size */ ulong pci_conv_32_to_size(ulong value, uint offset, enum pci_size_t size); @@ -1365,7 +1365,7 @@ ulong pci_conv_32_to_size(ulong value, uint offset, enum pci_size_t size); * @value: Value to transform (32-bit value read from @offset & ~3) * @offset: Register offset that should be written * @size: Required size of the write - * @return the value that should be written as a 32-bit access to @offset & ~3. + * Return: the value that should be written as a 32-bit access to @offset & ~3. */ ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, enum pci_size_t size); @@ -1374,7 +1374,7 @@ ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, * pci_get_controller() - obtain the controller to use for a bus * * @dev: Device to check - * @return pointer to the controller device for this bus + * Return: pointer to the controller device for this bus */ struct udevice *pci_get_controller(struct udevice *dev);

@@ -1385,7 +1385,7 @@ struct udevice *pci_get_controller(struct udevice *dev); * @iop: Returns a pointer to the I/O region, or NULL if none * @memp: Returns a pointer to the memory region, or NULL if none * @prefp: Returns a pointer to the pre-fetch region, or NULL if none - * @return the number of non-NULL regions returned, normally 3 + * Return: the number of non-NULL regions returned, normally 3 */ int pci_get_regions(struct udevice *dev, struct pci_region **iop, struct pci_region **memp, struct pci_region **prefp); @@ -1417,7 +1417,7 @@ u32 dm_pci_read_bar32(const struct udevice *dev, int barnum); * @dev: Device containing the PCI address * @addr: PCI address to convert * @flags: Flags for the region type (PCI_REGION_...) - * @return physical address corresponding to that PCI bus address + * Return: physical address corresponding to that PCI bus address */ phys_addr_t dm_pci_bus_to_phys(struct udevice *dev, pci_addr_t addr, unsigned long flags); @@ -1428,7 +1428,7 @@ phys_addr_t dm_pci_bus_to_phys(struct udevice *dev, pci_addr_t addr, * @dev: Device containing the bus address * @addr: Physical address to convert * @flags: Flags for the region type (PCI_REGION_...) - * @return PCI bus address corresponding to that physical address + * Return: PCI bus address corresponding to that physical address */ pci_addr_t dm_pci_phys_to_bus(struct udevice *dev, phys_addr_t addr, unsigned long flags); @@ -1582,7 +1582,7 @@ int dm_pci_flr(struct udevice *dev); * @device: Device ID * @index: 0 to find the first match, 1 for second, etc. * @devp: Returns pointer to the device, if found - * @return 0 if found, -ve on error + * Return: 0 if found, -ve on error */ int dm_pci_find_device(unsigned int vendor, unsigned int device, int index, struct udevice **devp); @@ -1593,7 +1593,7 @@ int dm_pci_find_device(unsigned int vendor, unsigned int device, int index, * @find_class: 3-byte (24-bit) class value to find * @index: 0 to find the first match, 1 for second, etc. * @devp: Returns pointer to the device, if found - * @return 0 if found, -ve on error + * Return: 0 if found, -ve on error */ int dm_pci_find_class(uint find_class, int index, struct udevice **devp);

@@ -1705,7 +1705,7 @@ struct dm_pci_emul_ops { * @find_devfn: PCI device and function address (PCI_DEVFN()) * @containerp: Returns container device if found * @emulp: Returns emulated device if found - * @return 0 if found, -ENODEV if not found + * Return: 0 if found, -ENODEV if not found */ int sandbox_pci_get_emul(const struct udevice *bus, pci_dev_t find_devfn, struct udevice **containerp, struct udevice **emulp); @@ -1715,7 +1715,7 @@ int sandbox_pci_get_emul(const struct udevice *bus, pci_dev_t find_devfn, * * @emul: Emulation device to check * @devp: Returns the client device emulated by this device - * @return 0 if OK, -ENOENT if the device has no client yet + * Return: 0 if OK, -ENOENT if the device has no client yet */ int sandbox_pci_get_client(struct udevice *emul, struct udevice **devp);

diff --git a/include/pci_ep.h b/include/pci_ep.h index 00e8c6d8ab..e8e5800096 100644 --- a/include/pci_ep.h +++ b/include/pci_ep.h @@ -255,7 +255,7 @@ struct pci_ep_ops { * @dev: device to write to * @func_num: EP function to fill * @hdr: header to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_write_header(struct udevice *dev, uint func_num, struct pci_ep_header *hdr); @@ -266,7 +266,7 @@ int pci_ep_write_header(struct udevice *dev, uint func_num, * @dev: device to write to * @func_num: EP function to fill * @hdr: header to read to - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_read_header(struct udevice *dev, uint func_num, struct pci_ep_header *hdr); @@ -276,7 +276,7 @@ int pci_ep_read_header(struct udevice *dev, uint func_num, * @dev: device to set * @func_num: EP function to set * @bar: bar data - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_set_bar(struct udevice *dev, uint func_num, struct pci_bar *bar);

@@ -287,7 +287,7 @@ int pci_ep_set_bar(struct udevice *dev, uint func_num, struct pci_bar *bar); * @func_num: EP function to read * @bar: struct to copy data to * @barno: bar number to read - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_read_bar(struct udevice *dev, uint func_no, struct pci_bar *ep_bar, enum pci_barno barno); @@ -298,7 +298,7 @@ int pci_ep_read_bar(struct udevice *dev, uint func_no, struct pci_bar *ep_bar, * @dev: device to clear * @func_num: EP function to clear * @bar: bar number - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_clear_bar(struct udevice *dev, uint func_num, enum pci_barno bar); /** @@ -312,7 +312,7 @@ int pci_ep_clear_bar(struct udevice *dev, uint func_num, enum pci_barno bar); * @addr: local physical address base * @pci_addr: pci address to translate to * @size: region size - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_map_addr(struct udevice *dev, uint func_num, phys_addr_t addr, u64 pci_addr, size_t size); @@ -324,7 +324,7 @@ int pci_ep_map_addr(struct udevice *dev, uint func_num, phys_addr_t addr, * @dev: device to set * @func_num: EP function to set * @addr: local physical address base - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_unmap_addr(struct udevice *dev, uint func_num, phys_addr_t addr);

@@ -337,7 +337,7 @@ int pci_ep_unmap_addr(struct udevice *dev, uint func_num, phys_addr_t addr); * @dev: device to set * @func_num: EP function to set * @interrupts: required interrupts count - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_set_msi(struct udevice *dev, uint func_num, uint interrupts);

@@ -349,7 +349,7 @@ int pci_ep_set_msi(struct udevice *dev, uint func_num, uint interrupts); * * @dev: device to use * @func_num: EP function to use - * @return msi count if OK, -EINVAL if msi were not enabled at host. + * Return: msi count if OK, -EINVAL if msi were not enabled at host. */ int pci_ep_get_msi(struct udevice *dev, uint func_num);

@@ -362,7 +362,7 @@ int pci_ep_get_msi(struct udevice *dev, uint func_num); * @dev: device to set * @func_num: EP function to set * @interrupts: required interrupts count - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_set_msix(struct udevice *dev, uint func_num, uint interrupts);

@@ -374,7 +374,7 @@ int pci_ep_set_msix(struct udevice *dev, uint func_num, uint interrupts); * * @dev: device to use * @func_num: EP function to use - * @return msi count if OK, -EINVAL if msi were not enabled at host. + * Return: msi count if OK, -EINVAL if msi were not enabled at host. */ int pci_ep_get_msix(struct udevice *dev, uint func_num);

@@ -385,7 +385,7 @@ int pci_ep_get_msix(struct udevice *dev, uint func_num); * @func_num: EP function to set * @type: type of irq to send * @interrupt_num: interrupt vector to use - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_raise_irq(struct udevice *dev, uint func_num, enum pci_ep_irq_type type, uint interrupt_num); @@ -396,7 +396,7 @@ int pci_ep_raise_irq(struct udevice *dev, uint func_num, * process. * * @dev: device to set - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_start(struct udevice *dev);

@@ -407,7 +407,7 @@ int pci_ep_start(struct udevice *dev); * link. * * @dev: device to set - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pci_ep_stop(struct udevice *dev);

diff --git a/include/pci_rom.h b/include/pci_rom.h index 895c9627f4..1cc61c387b 100644 --- a/include/pci_rom.h +++ b/include/pci_rom.h @@ -60,7 +60,7 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void), * the mapping ourselves. * * @vendev: Vendor and device for the video device - * @return standard vendor and device expected by the ROM + * Return: standard vendor and device expected by the ROM */ uint32_t board_map_oprom_vendev(uint32_t vendev);

diff --git a/include/phy-sun4i-usb.h b/include/phy-sun4i-usb.h index b0a45b2058..c37c59379f 100644 --- a/include/phy-sun4i-usb.h +++ b/include/phy-sun4i-usb.h @@ -11,7 +11,7 @@ * sun4i_usb_phy_id_detect - detect ID pin of USB PHY * * @phy: USB PHY port to detect ID pin - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int sun4i_usb_phy_id_detect(struct phy *phy);

@@ -19,7 +19,7 @@ int sun4i_usb_phy_id_detect(struct phy *phy); * sun4i_usb_phy_vbus_detect - detect VBUS pin of USB PHY * * @phy: USB PHY port to detect VBUS pin - * @return 0 if OK, or a negative error code + * Return: 0 if OK, or a negative error code */ int sun4i_usb_phy_vbus_detect(struct phy *phy);

diff --git a/include/physmem.h b/include/physmem.h index 03d3a78b74..c88ae9653f 100644 --- a/include/physmem.h +++ b/include/physmem.h @@ -16,6 +16,6 @@ * @param c The character to set each byte of the region to. * @param n The number of bytes to set. * - * @return The physical address of the memory which was set. + * Return: The physical address of the memory which was set. */ phys_addr_t arch_phys_memset(phys_addr_t s, int c, phys_size_t n); diff --git a/include/power-domain.h b/include/power-domain.h index 62ff19948f..113276b511 100644 --- a/include/power-domain.h +++ b/include/power-domain.h @@ -74,7 +74,7 @@ struct power_domain { * * @dev: The client device. * @power_domain A pointer to a power domain struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ #if CONFIG_IS_ENABLED(POWER_DOMAIN) int power_domain_get(struct udevice *dev, struct power_domain *power_domain); @@ -93,7 +93,7 @@ int power_domain_get(struct udevice *dev, struct power_domain *power_domain) * @power_domain: A pointer to a power domain struct to initialize. * @index: Power domain index to be powered on. * - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ #if CONFIG_IS_ENABLED(POWER_DOMAIN) int power_domain_get_by_index(struct udevice *dev, @@ -112,7 +112,7 @@ int power_domain_get_by_index(struct udevice *dev, * * @power_domain: A power domain struct that was previously successfully * requested by power_domain_get(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ #if CONFIG_IS_ENABLED(POWER_DOMAIN) int power_domain_free(struct power_domain *power_domain); @@ -128,7 +128,7 @@ static inline int power_domain_free(struct power_domain *power_domain) * * @power_domain: A power domain struct that was previously successfully * requested by power_domain_get(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ #if CONFIG_IS_ENABLED(POWER_DOMAIN) int power_domain_on(struct power_domain *power_domain); @@ -144,7 +144,7 @@ static inline int power_domain_on(struct power_domain *power_domain) * * @power_domain: A power domain struct that was previously successfully * requested by power_domain_get(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ #if CONFIG_IS_ENABLED(POWER_DOMAIN) int power_domain_off(struct power_domain *power_domain); @@ -160,7 +160,7 @@ static inline int power_domain_off(struct power_domain *power_domain) * * @dev: The client device. * - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ #if CONFIG_IS_ENABLED(OF_REAL) && CONFIG_IS_ENABLED(POWER_DOMAIN) int dev_power_domain_on(struct udevice *dev); @@ -176,7 +176,7 @@ static inline int dev_power_domain_on(struct udevice *dev) * * @dev: The client device. * - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ #if CONFIG_IS_ENABLED(OF_REAL) && CONFIG_IS_ENABLED(POWER_DOMAIN) int dev_power_domain_off(struct udevice *dev); diff --git a/include/power/acpi_pmc.h b/include/power/acpi_pmc.h index 64176d79bc..62c4dcbd97 100644 --- a/include/power/acpi_pmc.h +++ b/include/power/acpi_pmc.h @@ -141,7 +141,7 @@ struct acpi_pmc_ops { * This reads the current state of the PMC. This reads in the common registers, * then calls the device's init() method to read the SoC-specific registers. * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pmc_init(struct udevice *dev);

@@ -151,7 +151,7 @@ int pmc_init(struct udevice *dev); * This reads various state registers and returns the sleep state from * which the system woke. * - * @return enum acpi_sleep_state indicating the previous sleep state + * Return: enum acpi_sleep_state indicating the previous sleep state * (ACPI_S0, ACPI_S3 or ACPI_S5), or -ve on error */ int pmc_prev_sleep_state(struct udevice *dev); @@ -162,7 +162,7 @@ int pmc_prev_sleep_state(struct udevice *dev); * Disables the timer/counter in the PMC * * @dev: PMC device to use - * @return 0 + * Return: 0 */ int pmc_disable_tco(struct udevice *dev);

@@ -176,7 +176,7 @@ int pmc_disable_tco(struct udevice *dev); * * @dev: PMC device to use * @enable: true to enable global reset, false to disable - * @return 0 + * Return: 0 */ int pmc_global_reset_set_enable(struct udevice *dev, bool enable);

@@ -190,7 +190,7 @@ void pmc_dump_info(struct udevice *dev); * pmc_gpe_init() - Set up general-purpose events * * @dev: PMC device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pmc_gpe_init(struct udevice *dev);

diff --git a/include/power/pmic.h b/include/power/pmic.h index 97f855ce39..70f2709bd0 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -201,7 +201,7 @@ struct pmic_child_info { * * @pmic - pmic device - the parent of found child's * @child_info - N-childs info array - * @return a positive number of childs, or 0 if no child found (error) + * Return: a positive number of childs, or 0 if no child found (error) * * Note: For N-childs the child_info array should have N+1 entries and the last * entry prefix should be NULL - the same as for drivers compatible. @@ -236,7 +236,7 @@ int pmic_bind_children(struct udevice *pmic, ofnode parent, * * @name - device name * @devp - returned pointer to the pmic device - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. * * The returned devp device can be used with pmic_read/write calls */ @@ -248,7 +248,7 @@ int pmic_get(const char *name, struct udevice **devp); * The required pmic device can be obtained by 'pmic_get()' * * @dev - pointer to the UCLASS_PMIC device - * @return register count value on success or negative value of errno. + * Return: register count value on success or negative value of errno. */ int pmic_reg_count(struct udevice *dev);

@@ -261,7 +261,7 @@ int pmic_reg_count(struct udevice *dev); * @reg - device register offset * @buffer - pointer to read/write buffer * @len - byte count for read/write - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. */ int pmic_read(struct udevice *dev, uint reg, uint8_t *buffer, int len); int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len); @@ -271,7 +271,7 @@ int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len); * * @dev: PMIC device to read * @reg: Register to read - * @return value read on success or negative value of errno. + * Return: value read on success or negative value of errno. */ int pmic_reg_read(struct udevice *dev, uint reg);

@@ -281,7 +281,7 @@ int pmic_reg_read(struct udevice *dev, uint reg); * @dev: PMIC device to write * @reg: Register to write * @value: Value to write - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. */ int pmic_reg_write(struct udevice *dev, uint reg, uint value);

@@ -295,7 +295,7 @@ int pmic_reg_write(struct udevice *dev, uint reg, uint value); * @reg: Register to update * @clr: Bit mask to clear (set those bits that you want cleared) * @set: Bit mask to set (set those bits that you want set) - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. */ int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set);

diff --git a/include/power/regulator.h b/include/power/regulator.h index fad87c99e5..ff1bfc2435 100644 --- a/include/power/regulator.h +++ b/include/power/regulator.h @@ -274,7 +274,7 @@ struct dm_regulator_ops { * * @dev - pointer to the regulator device * @modep - pointer to the returned mode info array - * @return - count of modep entries on success or negative errno if fail. + * Return: - count of modep entries on success or negative errno if fail. */ int regulator_mode(struct udevice *dev, struct dm_regulator_mode **modep);

@@ -282,7 +282,7 @@ int regulator_mode(struct udevice *dev, struct dm_regulator_mode **modep); * regulator_get_value: get microvoltage voltage value of a given regulator * * @dev - pointer to the regulator device - * @return - positive output value [uV] on success or negative errno if fail. + * Return: - positive output value [uV] on success or negative errno if fail. */ int regulator_get_value(struct udevice *dev);

@@ -291,7 +291,7 @@ int regulator_get_value(struct udevice *dev); * * @dev - pointer to the regulator device * @uV - the output value to set [micro Volts] - * @return - 0 on success or -errno val if fails + * Return: - 0 on success or -errno val if fails */ int regulator_set_value(struct udevice *dev, int uV);

@@ -300,7 +300,7 @@ int regulator_set_value(struct udevice *dev, int uV); * * @dev - pointer to the regulator device * @uV - the output suspend value to set [micro Volts] - * @return - 0 on success or -errno val if fails + * Return: - 0 on success or -errno val if fails */ int regulator_set_suspend_value(struct udevice *dev, int uV);

@@ -308,7 +308,7 @@ int regulator_set_suspend_value(struct udevice *dev, int uV); * regulator_get_suspend_value: get the suspend microvoltage value of a given regulator. * * @dev - pointer to the regulator device - * @return - positive output value [uV] on success or negative errno if fail. + * Return: - positive output value [uV] on success or negative errno if fail. */ int regulator_get_suspend_value(struct udevice *dev);

@@ -318,7 +318,7 @@ int regulator_get_suspend_value(struct udevice *dev); * * @dev - pointer to the regulator device * @uV - the output value to set [micro Volts] - * @return - 0 on success or -errno val if fails + * Return: - 0 on success or -errno val if fails */ int regulator_set_value_force(struct udevice *dev, int uV);

@@ -326,7 +326,7 @@ int regulator_set_value_force(struct udevice *dev, int uV); * regulator_get_current: get microampere value of a given regulator * * @dev - pointer to the regulator device - * @return - positive output current [uA] on success or negative errno if fail. + * Return: - positive output current [uA] on success or negative errno if fail. */ int regulator_get_current(struct udevice *dev);

@@ -335,7 +335,7 @@ int regulator_get_current(struct udevice *dev); * * @dev - pointer to the regulator device * @uA - set the output current [micro Amps] - * @return - 0 on success or -errno val if fails + * Return: - 0 on success or -errno val if fails */ int regulator_set_current(struct udevice *dev, int uA);

@@ -343,7 +343,7 @@ int regulator_set_current(struct udevice *dev, int uA); * regulator_get_enable: get regulator device enable state. * * @dev - pointer to the regulator device - * @return - true/false of enable state or -errno val if fails + * Return: - true/false of enable state or -errno val if fails */ int regulator_get_enable(struct udevice *dev);

@@ -352,7 +352,7 @@ int regulator_get_enable(struct udevice *dev); * * @dev - pointer to the regulator device * @enable - set true or false - * @return - 0 on success or -errno val if fails + * Return: - 0 on success or -errno val if fails */ int regulator_set_enable(struct udevice *dev, bool enable);

@@ -362,7 +362,7 @@ int regulator_set_enable(struct udevice *dev, bool enable); * * @dev - pointer to the regulator device * @enable - set true or false - * @return - 0 on success or if enabling is not supported + * Return: - 0 on success or if enabling is not supported * -errno val if fails. */ int regulator_set_enable_if_allowed(struct udevice *dev, bool enable); @@ -372,7 +372,7 @@ int regulator_set_enable_if_allowed(struct udevice *dev, bool enable); * * @dev - pointer to the regulator device * @enable - set true or false - * @return - 0 on success or -errno val if fails + * Return: - 0 on success or -errno val if fails */ int regulator_set_suspend_enable(struct udevice *dev, bool enable);

@@ -380,7 +380,7 @@ int regulator_set_suspend_enable(struct udevice *dev, bool enable); * regulator_get_suspend_enable: get regulator suspend enable state * * @dev - pointer to the regulator device - * @return - true/false of enable state or -errno val if fails + * Return: - true/false of enable state or -errno val if fails */ int regulator_get_suspend_enable(struct udevice *dev);

@@ -388,7 +388,7 @@ int regulator_get_suspend_enable(struct udevice *dev); * regulator_get_mode: get active operation mode id of a given regulator * * @dev - pointer to the regulator device - * @return - positive mode 'id' number on success or -errno val if fails + * Return: - positive mode 'id' number on success or -errno val if fails * Note: * The device can provide an array of operating modes, which is type of struct * dm_regulator_mode. Each mode has it's own 'id', which should be unique inside @@ -402,7 +402,7 @@ int regulator_get_mode(struct udevice *dev); * * @dev - pointer to the regulator device * @mode_id - mode id to set ('id' field of struct type dm_regulator_mode) - * @return - 0 on success or -errno value if fails + * Return: - 0 on success or -errno value if fails * Note: * The device can provide an array of operating modes, which is type of struct * dm_regulator_mode. Each mode has it's own 'id', which should be unique inside @@ -493,7 +493,7 @@ int regulator_autoset_by_name(const char *platname, struct udevice **devp); * @list_devp - an array of returned pointers to the successfully setup * regulator devices if non-NULL passed * @verbose - (true/false) print each regulator setup info, or be quiet - * @return 0 on successfully setup of all list entries, otherwise first error. + * Return: 0 on successfully setup of all list entries, otherwise first error. * * The returned 'regulator' devices can be used with: * - regulator_get/set_* @@ -515,7 +515,7 @@ int regulator_list_autoset(const char *list_platname[], * * @devname - expected string for 'dev->name' of regulator device * @devp - returned pointer to the regulator device - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. * * The returned 'regulator' device is probed and can be used with: * - regulator_get/set_* @@ -528,7 +528,7 @@ int regulator_get_by_devname(const char *devname, struct udevice **devp); * * @platname - expected string for uc_pdata->name of regulator uclass plat * @devp - returns pointer to the regulator device or NULL on error - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. * * The returned 'regulator' device is probed and can be used with: * - regulator_get/set_* @@ -546,7 +546,7 @@ int regulator_get_by_platname(const char *platname, struct udevice **devp); * @dev - device with supply phandle * @supply_name - phandle name of regulator * @devp - returned pointer to the supply device - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. */ int device_get_supply_regulator(struct udevice *dev, const char *supply_name, struct udevice **devp); diff --git a/include/pwm.h b/include/pwm.h index 668551e4b8..bfdc1e3f30 100644 --- a/include/pwm.h +++ b/include/pwm.h @@ -63,7 +63,7 @@ struct pwm_ops { * @channel: PWM channel to update * @period_ns: PWM period in nanoseconds * @duty_ns: PWM duty period in nanoseconds - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pwm_set_config(struct udevice *dev, uint channel, uint period_ns, uint duty_ns); @@ -74,7 +74,7 @@ int pwm_set_config(struct udevice *dev, uint channel, uint period_ns, * @dev: PWM device to update * @channel: PWM channel to update * @enable: true to enable, false to disable - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pwm_set_enable(struct udevice *dev, uint channel, bool enable);

@@ -84,7 +84,7 @@ int pwm_set_enable(struct udevice *dev, uint channel, bool enable); * @dev: PWM device to update * @channel: PWM channel to update * @polarity: true to invert, false to keep normal polarity - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int pwm_set_invert(struct udevice *dev, uint channel, bool polarity);

diff --git a/include/pxe_utils.h b/include/pxe_utils.h index b7037f841a..dad2668818 100644 --- a/include/pxe_utils.h +++ b/include/pxe_utils.h @@ -205,7 +205,7 @@ int format_mac_pxe(char *outbuf, size_t outbuf_len); * @allow_abs_path: true to allow absolute paths * @bootfile: Bootfile whose directory loaded files are relative to, NULL if * none - * @return 0 if OK, -ENOMEM if out of memory, -E2BIG if bootfile is larger than + * Return: 0 if OK, -ENOMEM if out of memory, -E2BIG if bootfile is larger than * MAX_TFTP_PATH_LEN bytes */ int pxe_setup_ctx(struct pxe_context *ctx, struct cmd_tbl *cmdtp, @@ -232,7 +232,7 @@ int pxe_process(struct pxe_context *ctx, ulong pxefile_addr_r, bool prompt); * pxe_get_file_size() - Read the value of the 'filesize' environment variable * * @sizep: Place to put the value - * @return 0 if OK, -ENOENT if no such variable, -EINVAL if format is invalid + * Return: 0 if OK, -ENOENT if no such variable, -EINVAL if format is invalid */ int pxe_get_file_size(ulong *sizep);

diff --git a/include/ram.h b/include/ram.h index 273d415394..2fc971df46 100644 --- a/include/ram.h +++ b/include/ram.h @@ -32,7 +32,7 @@ struct ram_ops { * * @dev: Device to check (UCLASS_RAM) * @info: Returns RAM info - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int ram_get_info(struct udevice *dev, struct ram_info *info);

diff --git a/include/reboot-mode/reboot-mode.h b/include/reboot-mode/reboot-mode.h index 86b51f881c..5fbd7c801a 100644 --- a/include/reboot-mode/reboot-mode.h +++ b/include/reboot-mode/reboot-mode.h @@ -49,7 +49,7 @@ struct reboot_mode_ops { * dm_reboot_mode_update() - Update the reboot mode env variable. * * @dev: Device to read from - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_reboot_mode_update(struct udevice *dev);

diff --git a/include/relocate.h b/include/relocate.h index 26682da955..2dbfd901e4 100644 --- a/include/relocate.h +++ b/include/relocate.h @@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR; /** * copy_uboot_to_ram() - Copy U-Boot to its new relocated position * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int copy_uboot_to_ram(void);

@@ -25,7 +25,7 @@ int copy_uboot_to_ram(void); * * This clears the memory used by global variables * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int clear_bss(void);

@@ -35,7 +35,7 @@ int clear_bss(void); * This processes the relocation tables to ensure that the code can run in its * new location. * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int do_elf_reloc_fixups(void);

@@ -46,7 +46,7 @@ int do_elf_reloc_fixups(void); * which need to manually relocate some things. * * @ptr: Pointer to relocate - * @return new pointer value + * Return: new pointer value */ static inline void *manual_reloc(void *ptr) { diff --git a/include/remoteproc.h b/include/remoteproc.h index 089131f65f..a8e654674e 100644 --- a/include/remoteproc.h +++ b/include/remoteproc.h @@ -134,20 +134,20 @@ struct dm_rproc_ops { #if CONFIG_IS_ENABLED(REMOTEPROC) /** * rproc_init() - Initialize all bound remote proc devices - * @return 0 if all ok, else appropriate error value. + * Return: 0 if all ok, else appropriate error value. */ int rproc_init(void);

/** * rproc_dev_init() - Initialize a remote proc device based on id * @id: id of the remote processor - * @return 0 if all ok, else appropriate error value. + * Return: 0 if all ok, else appropriate error value. */ int rproc_dev_init(int id);

/** * rproc_is_initialized() - check to see if remoteproc devices are initialized - * @return true if all devices are initialized, false otherwise. + * Return: true if all devices are initialized, false otherwise. */ bool rproc_is_initialized(void);

@@ -156,35 +156,35 @@ bool rproc_is_initialized(void); * @id: id of the remote processor * @addr: address in memory where the image is located * @size: size of the image - * @return 0 if all ok, else appropriate error value. + * Return: 0 if all ok, else appropriate error value. */ int rproc_load(int id, ulong addr, ulong size);

/** * rproc_start() - Start a remote processor * @id: id of the remote processor - * @return 0 if all ok, else appropriate error value. + * Return: 0 if all ok, else appropriate error value. */ int rproc_start(int id);

/** * rproc_stop() - Stop a remote processor * @id: id of the remote processor - * @return 0 if all ok, else appropriate error value. + * Return: 0 if all ok, else appropriate error value. */ int rproc_stop(int id);

/** * rproc_reset() - reset a remote processor * @id: id of the remote processor - * @return 0 if all ok, else appropriate error value. + * Return: 0 if all ok, else appropriate error value. */ int rproc_reset(int id);

/** * rproc_ping() - ping a remote processor to check if it can communicate * @id: id of the remote processor - * @return 0 if all ok, else appropriate error value. + * Return: 0 if all ok, else appropriate error value. * * NOTE: this might need communication path available, which is not implemented * as part of remoteproc framework - hook on to appropriate bus architecture to @@ -195,7 +195,7 @@ int rproc_ping(int id); /** * rproc_is_running() - check to see if remote processor is running * @id: id of the remote processor - * @return 0 if running, 1 if not running, -ve on error. + * Return: 0 if running, 1 if not running, -ve on error. * * NOTE: this may not involve actual communication capability of the remote * processor, but just ensures that it is out of reset and executing code. @@ -210,7 +210,7 @@ int rproc_is_running(int id); * * @addr: address of the image to verify * @size: size of the image - * @return 0 if the image looks good, else appropriate error value. + * Return: 0 if the image looks good, else appropriate error value. */ int rproc_elf32_sanity_check(ulong addr, ulong size);

@@ -222,7 +222,7 @@ int rproc_elf32_sanity_check(ulong addr, ulong size); * * @addr: address of the image to verify * @size: size of the image - * @return 0 if the image looks good, else appropriate error value. + * Return: 0 if the image looks good, else appropriate error value. */ int rproc_elf64_sanity_check(ulong addr, ulong size);

@@ -231,7 +231,7 @@ int rproc_elf64_sanity_check(ulong addr, ulong size); * @dev: device loading the ELF32 image * @addr: valid ELF32 image address * @size: size of the image - * @return 0 if the image is successfully loaded, else appropriate error value. + * Return: 0 if the image is successfully loaded, else appropriate error value. */ int rproc_elf32_load_image(struct udevice *dev, unsigned long addr, ulong size);

@@ -240,7 +240,7 @@ int rproc_elf32_load_image(struct udevice *dev, unsigned long addr, ulong size); * @dev: device loading the ELF64 image * @addr: valid ELF64 image address * @size: size of the image - * @return 0 if the image is successfully loaded, else appropriate error value. + * Return: 0 if the image is successfully loaded, else appropriate error value. */ int rproc_elf64_load_image(struct udevice *dev, ulong addr, ulong size);

@@ -251,7 +251,7 @@ int rproc_elf64_load_image(struct udevice *dev, ulong addr, ulong size); * @size: size of the image * * Auto detects if the image is ELF32 or ELF64 image and load accordingly. - * @return 0 if the image is successfully loaded, else appropriate error value. + * Return: 0 if the image is successfully loaded, else appropriate error value. */ int rproc_elf_load_image(struct udevice *dev, unsigned long addr, ulong size);

@@ -279,7 +279,7 @@ ulong rproc_elf_get_boot_addr(struct udevice *dev, ulong addr); * @rsc_size: pointer to the found resource table size. Updated on operation * success * - * @return 0 if a valid resource table is successfully loaded, -ENODATA if there + * Return: 0 if a valid resource table is successfully loaded, -ENODATA if there * is no resource table (which is optional), or another appropriate error value. */ int rproc_elf32_load_rsc_table(struct udevice *dev, ulong fw_addr, @@ -298,7 +298,7 @@ int rproc_elf32_load_rsc_table(struct udevice *dev, ulong fw_addr, * @rsc_size: pointer to the found resource table size. Updated on operation * success * - * @return 0 if a valid resource table is successfully loaded, -ENODATA if there + * Return: 0 if a valid resource table is successfully loaded, -ENODATA if there * is no resource table (which is optional), or another appropriate error value. */ int rproc_elf64_load_rsc_table(struct udevice *dev, ulong fw_addr, @@ -317,7 +317,7 @@ int rproc_elf64_load_rsc_table(struct udevice *dev, ulong fw_addr, * @rsc_size: pointer to the found resource table size. Updated on operation * success * - * @return 0 if a valid resource table is successfully loaded, -ENODATA if there + * Return: 0 if a valid resource table is successfully loaded, -ENODATA if there * is no resource table (which is optional), or another appropriate error value. */ int rproc_elf_load_rsc_table(struct udevice *dev, ulong fw_addr, diff --git a/include/reset.h b/include/reset.h index cde2c4b4a8..965f02e0ce 100644 --- a/include/reset.h +++ b/include/reset.h @@ -190,7 +190,7 @@ struct reset_ctl_bulk *devm_reset_bulk_get_optional_by_node(struct udevice *dev, * @index: The index of the reset signal to request, within the client's * list of reset signals. * @reset_ctl A pointer to a reset control struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_get_by_index(struct udevice *dev, int index, struct reset_ctl *reset_ctl); @@ -205,7 +205,7 @@ int reset_get_by_index(struct udevice *dev, int index, * @index: The index of the reset signal to request, within the client's * list of reset signals. * @reset_ctl A pointer to a reset control struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_get_by_index_nodev(ofnode node, int index, struct reset_ctl *reset_ctl); @@ -222,7 +222,7 @@ int reset_get_by_index_nodev(ofnode node, int index, * * @dev: The client device. * @bulk A pointer to a reset control bulk struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_get_bulk(struct udevice *dev, struct reset_ctl_bulk *bulk);

@@ -240,7 +240,7 @@ int reset_get_bulk(struct udevice *dev, struct reset_ctl_bulk *bulk); * @name: The name of the reset signal to request, within the client's * list of reset signals. * @reset_ctl: A pointer to a reset control struct to initialize. - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_get_by_name(struct udevice *dev, const char *name, struct reset_ctl *reset_ctl); @@ -250,7 +250,7 @@ int reset_get_by_name(struct udevice *dev, const char *name, * * @reset_ctl: A reset control struct. * - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_request(struct reset_ctl *reset_ctl);

@@ -259,7 +259,7 @@ int reset_request(struct reset_ctl *reset_ctl); * * @reset_ctl: A reset control struct that was previously successfully * requested by reset_get_by_*(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_free(struct reset_ctl *reset_ctl);

@@ -273,7 +273,7 @@ int reset_free(struct reset_ctl *reset_ctl); * * @reset_ctl: A reset control struct that was previously successfully * requested by reset_get_by_*(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_assert(struct reset_ctl *reset_ctl);

@@ -288,7 +288,7 @@ int reset_assert(struct reset_ctl *reset_ctl); * * @bulk: A reset control bulk struct that was previously successfully * requested by reset_get_bulk(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_assert_bulk(struct reset_ctl_bulk *bulk);

@@ -301,7 +301,7 @@ int reset_assert_bulk(struct reset_ctl_bulk *bulk); * * @reset_ctl: A reset control struct that was previously successfully * requested by reset_get_by_*(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_deassert(struct reset_ctl *reset_ctl);

@@ -315,7 +315,7 @@ int reset_deassert(struct reset_ctl *reset_ctl); * * @bulk: A reset control bulk struct that was previously successfully * requested by reset_get_bulk(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_deassert_bulk(struct reset_ctl_bulk *bulk);

@@ -323,7 +323,7 @@ int reset_deassert_bulk(struct reset_ctl_bulk *bulk); * rst_status - Check reset signal status. * * @reset_ctl: The reset signal to check. - * @return 0 if deasserted, positive if asserted, or a negative + * Return: 0 if deasserted, positive if asserted, or a negative * error code. */ int reset_status(struct reset_ctl *reset_ctl); @@ -337,7 +337,7 @@ int reset_status(struct reset_ctl *reset_ctl); * @reset_ctl: A reset struct array that was previously successfully * requested by reset_get_by_*(). * @count Number of reset contained in the array - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ int reset_release_all(struct reset_ctl *reset_ctl, int count);

@@ -351,7 +351,7 @@ int reset_release_all(struct reset_ctl *reset_ctl, int count); * * @bulk: A reset control bulk struct that was previously successfully * requested by reset_get_bulk(). - * @return 0 if OK, or a negative error code. + * Return: 0 if OK, or a negative error code. */ static inline int reset_release_bulk(struct reset_ctl_bulk *bulk) { @@ -462,7 +462,7 @@ static inline int reset_release_bulk(struct reset_ctl_bulk *bulk) * reset_valid() - check if reset is valid * * @reset_ctl: the reset to check - * @return TRUE if valid, or FALSE + * Return: TRUE if valid, or FALSE */ static inline bool reset_valid(struct reset_ctl *reset_ctl) { diff --git a/include/rtc.h b/include/rtc.h index 1efc0db3de..6c7fcadd48 100644 --- a/include/rtc.h +++ b/include/rtc.h @@ -94,7 +94,7 @@ struct rtc_ops { * @dev: Device to write to * @reg: Register to write * @value: Value to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int (*write8)(struct udevice *dev, unsigned int reg, int val); }; @@ -107,7 +107,7 @@ struct rtc_ops { * * @dev: Device to read from * @time: Place to put the current time - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_rtc_get(struct udevice *dev, struct rtc_time *time);

@@ -116,7 +116,7 @@ int dm_rtc_get(struct udevice *dev, struct rtc_time *time); * * @dev: Device to read from * @time: Time to write into the RTC - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_rtc_set(struct udevice *dev, struct rtc_time *time);

@@ -129,7 +129,7 @@ int dm_rtc_set(struct udevice *dev, struct rtc_time *time); * the caller. * * @dev: Device to read from - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_rtc_reset(struct udevice *dev);

@@ -140,7 +140,7 @@ int dm_rtc_reset(struct udevice *dev); * @reg: First register to read * @buf: Output buffer * @len: Number of registers to read - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_rtc_read(struct udevice *dev, unsigned int reg, u8 *buf, unsigned int len);

@@ -151,7 +151,7 @@ int dm_rtc_read(struct udevice *dev, unsigned int reg, u8 *buf, unsigned int len * @reg: First register to write * @buf: Input buffer * @len: Number of registers to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int dm_rtc_write(struct udevice *dev, unsigned int reg, const u8 *buf, unsigned int len); @@ -161,7 +161,7 @@ int dm_rtc_write(struct udevice *dev, unsigned int reg, * * @dev: Device to read from * @reg: Register to read - * @return value read, or -ve on error + * Return: value read, or -ve on error */ int rtc_read8(struct udevice *dev, unsigned int reg);

@@ -171,7 +171,7 @@ int rtc_read8(struct udevice *dev, unsigned int reg); * @dev: Device to write to * @reg: Register to write * @value: Value to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int rtc_write8(struct udevice *dev, unsigned int reg, int val);

@@ -181,7 +181,7 @@ int rtc_write8(struct udevice *dev, unsigned int reg, int val); * @dev: Device to read from * @reg: Offset to start reading from * @valuep: Place to put the value that is read - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep);

@@ -191,7 +191,7 @@ int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep); * @dev: Device to write to * @reg: Register to start writing to * @value: Value to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int rtc_write16(struct udevice *dev, unsigned int reg, u16 value);

@@ -201,7 +201,7 @@ int rtc_write16(struct udevice *dev, unsigned int reg, u16 value); * @dev: Device to read from * @reg: Offset to start reading from * @valuep: Place to put the value that is read - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep);

@@ -211,7 +211,7 @@ int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep); * @dev: Device to write to * @reg: Register to start writing to * @value: Value to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int rtc_write32(struct udevice *dev, unsigned int reg, u32 value);

@@ -231,7 +231,7 @@ void rtc_enable_32khz_output(void); * rtc_read8() - Read an 8-bit register * * @reg: Register to read - * @return value read + * Return: value read */ int rtc_read8(int reg);

@@ -247,7 +247,7 @@ void rtc_write8(int reg, uchar val); * rtc_read32() - Read a 32-bit value from the RTC * * @reg: Offset to start reading from - * @return value read + * Return: value read */ u32 rtc_read32(int reg);

@@ -269,7 +269,7 @@ void rtc_init(void); * is_leap_year - Check if year is a leap year * * @year Year - * @return 1 if leap year + * Return: 1 if leap year */ static inline bool is_leap_year(unsigned int year) { @@ -283,7 +283,7 @@ static inline bool is_leap_year(unsigned int year) * It sets time->tm_wdaay to the correct day of the week. * * @time: Time to inspect. tm_wday is updated - * @return 0 if OK, -EINVAL if the weekday could not be determined + * Return: 0 if OK, -EINVAL if the weekday could not be determined */ int rtc_calc_weekday(struct rtc_time *time);

@@ -309,7 +309,7 @@ void rtc_to_tm(u64 time_t, struct rtc_time *time); * Note that tm_wday and tm_yday are ignored. * * @time: Broken-out time to convert - * @return corresponding time_t value, seconds since 1970-01-01 00:00:00 + * Return: corresponding time_t value, seconds since 1970-01-01 00:00:00 */ unsigned long rtc_mktime(const struct rtc_time *time);

diff --git a/include/scmi_agent.h b/include/scmi_agent.h index ed40c7360a..5015c06be9 100644 --- a/include/scmi_agent.h +++ b/include/scmi_agent.h @@ -53,7 +53,7 @@ struct scmi_msg { * * @dev: SCMI agent device * @msg: Message structure reference - * @return 0 on success and a negative errno on failure + * Return: 0 on success and a negative errno on failure */ int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg);

@@ -61,7 +61,7 @@ int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg); * scmi_to_linux_errno() - Convert an SCMI error code into a Linux errno code * * @scmi_errno: SCMI error code value - * @return 0 for successful status and a negative errno otherwise + * Return: 0 for successful status and a negative errno otherwise */ int scmi_to_linux_errno(s32 scmi_errno);

diff --git a/include/scsi.h b/include/scsi.h index 0a475a8ca4..66a2caa26e 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -207,7 +207,7 @@ extern struct scsi_ops scsi_ops; * * @dev: SCSI bus * @cmd: Command to execute - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int scsi_exec(struct udevice *dev, struct scsi_cmd *cmd);

@@ -215,7 +215,7 @@ int scsi_exec(struct udevice *dev, struct scsi_cmd *cmd); * scsi_bus_reset() - reset the bus * * @dev: SCSI bus to reset - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int scsi_bus_reset(struct udevice *dev);

diff --git a/include/sdhci.h b/include/sdhci.h index c718dd7206..c8d69f5a63 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -470,7 +470,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, * @cfg: Empty configuration structure (generally &plat->cfg). This is * normally all zeroes at this point. The only purpose of passing * this in is to set mmc->cfg to it. - * @return 0 if OK, -ve if the block device could not be created + * Return: 0 if OK, -ve if the block device could not be created */ int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); #else @@ -483,7 +483,7 @@ int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); * @host: SDHCI host structure * @f_max: Maximum supported clock frequency in HZ (0 for default) * @f_min: Minimum supported clock frequency in HZ (0 for default) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min); #endif /* !CONFIG_BLK */ diff --git a/include/search.h b/include/search.h index d0bb44388e..7faf23f4ac 100644 --- a/include/search.h +++ b/include/search.h @@ -86,7 +86,7 @@ int hmatch_r(const char *match, int last_idx, struct env_entry **retval, * @key: Name of entry to delete * @htab: Hash table * @flag: Flags to use (H_...) - * @return 0 on success, -ENOENT if not found, -EPERM if the hash table callback + * Return: 0 on success, -ENOENT if not found, -EPERM if the hash table callback * rejected changing the variable, -EINVAL if the hash table refused to * delete the variable */ diff --git a/include/serial.h b/include/serial.h index 6d1e62c677..19a8c0c67d 100644 --- a/include/serial.h +++ b/include/serial.h @@ -293,7 +293,7 @@ struct serial_dev_priv { * * @dev: Device pointer * @serial_config: Returns config information (see SERIAL_... above) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int serial_getconfig(struct udevice *dev, uint *config);

@@ -305,7 +305,7 @@ int serial_getconfig(struct udevice *dev, uint *config); * * @dev: Device pointer * @serial_config: number of bits, parity and number of stopbits to use - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int serial_setconfig(struct udevice *dev, uint config);

@@ -314,7 +314,7 @@ int serial_setconfig(struct udevice *dev, uint config); * * @dev: Device pointer * @info: struct serial_device_info to fill - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int serial_getinfo(struct udevice *dev, struct serial_device_info *info);

@@ -333,7 +333,7 @@ void sh_serial_initialize(void); * The total size of the output must be less than CONFIG_SYS_PBSIZE. * * @fmt: Printf format string, followed by format arguments - * @return number of characters written + * Return: number of characters written */ int serial_printf(const char *fmt, ...) __attribute__ ((format (__printf__, 1, 2))); diff --git a/include/smbios.h b/include/smbios.h index acfcbfe2ca..c9df2706f5 100644 --- a/include/smbios.h +++ b/include/smbios.h @@ -271,7 +271,7 @@ char *smbios_string(const struct smbios_header *header, int index); * main loop has started) to update the BIOS version string (SMBIOS table 0). * * @version: New version string to use - * @return 0 if OK, -ENOENT if no version string was previously written, + * Return: 0 if OK, -ENOENT if no version string was previously written, * -ENOSPC if the new string is too large to fit */ int smbios_update_version(const char *version); @@ -287,7 +287,7 @@ int smbios_update_version(const char *version); * * @smbios_tab: Start of SMBIOS tables * @version: New version string to use - * @return 0 if OK, -ENOENT if no version string was previously written, + * Return: 0 if OK, -ENOENT if no version string was previously written, * -ENOSPC if the new string is too large to fit */ int smbios_update_version_full(void *smbios_tab, const char *version); diff --git a/include/smem.h b/include/smem.h index 83da9e177e..b19c534ebc 100644 --- a/include/smem.h +++ b/include/smem.h @@ -57,7 +57,7 @@ struct smem_ops { * @host: remote processor id, or -1 * @item: smem item handle * @size: number of bytes to be allocated - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error * * Allocate space for a given smem item of size @size, given that the item is * not yet allocated. @@ -69,7 +69,7 @@ int smem_alloc(struct udevice *dev, unsigned int host, unsigned int item, size_t * @host: the remote processor, or -1 for all processors. * @item: smem item handle * @size: pointer to be filled out with size of the item - * @return pointer on success, NULL on error + * Return: pointer on success, NULL on error * * Looks up smem item and returns pointer to it. Size of smem * item is returned in @size. @@ -80,7 +80,7 @@ void *smem_get(struct udevice *dev, unsigned int host, unsigned int item, size_t * smem_get_free_space() - retrieve amount of free space in a partition * @host: the remote processor identifying a partition, or -1 * for all processors. - * @return size in bytes, -ve on error + * Return: size in bytes, -ve on error * * To be used by smem clients as a quick way to determine if any new * allocations has been made. diff --git a/include/sort.h b/include/sort.h index 0c6b588fcb..76483cff33 100644 --- a/include/sort.h +++ b/include/sort.h @@ -27,7 +27,7 @@ void qsort(void *base, size_t nmemb, size_t size, * * @s1: First string to compare * @s2: Second string to compare - * @return comparison value (less than, equal to, or greater than 0) + * Return: comparison value (less than, equal to, or greater than 0) */ int strcmp_compar(const void *s1, const void *s2);

diff --git a/include/sound.h b/include/sound.h index 71bd850652..dab9ea186e 100644 --- a/include/sound.h +++ b/include/sound.h @@ -116,7 +116,7 @@ int sound_setup(struct udevice *dev); * @dev: Sound device * @msecs: Duration of beep in milliseconds * @frequency_hz: Frequency of the beep in Hertz - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int sound_beep(struct udevice *dev, int msecs, int frequency_hz);

@@ -128,7 +128,7 @@ int sound_beep(struct udevice *dev, int msecs, int frequency_hz); * * @dev: Sound device * @frequency_hz: Beep frequency in hertz - * @return if OK, -ve on error + * Return: if OK, -ve on error */ int sound_start_beep(struct udevice *dev, int frequency_hz);

@@ -138,7 +138,7 @@ int sound_start_beep(struct udevice *dev, int frequency_hz); * This tells the sound hardware to stop a previously started beep. * * @dev: Sound device - * @return if OK, -ve on error + * Return: if OK, -ve on error */ int sound_stop_beep(struct udevice *dev);

diff --git a/include/spi.h b/include/spi.h index dc3b21132a..fa9ab12dbe 100644 --- a/include/spi.h +++ b/include/spi.h @@ -561,7 +561,7 @@ struct dm_spi_emul_ops { * @cs: Chip select to look for * @busp: Returns bus device * @devp: Return slave device - * @return 0 if found, -ENODEV on error + * Return: 0 if found, -ENODEV on error */ int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp, struct udevice **devp); @@ -586,7 +586,7 @@ int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp, * @dev_name: Name of the new device thus created * @busp: Returns bus device * @devp: Return slave device - * @return 0 if found, -ve on error + * Return: 0 if found, -ve on error */ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode, const char *drv_name, const char *dev_name, @@ -595,7 +595,7 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode, /** * spi_chip_select() - Get the chip select for a slave * - * @return the chip select this slave is attached to + * Return: the chip select this slave is attached to */ int spi_chip_select(struct udevice *slave);

@@ -605,7 +605,7 @@ int spi_chip_select(struct udevice *slave); * @bus: SPI bus to search * @cs: Chip select to look for * @devp: Returns the slave device if found - * @return 0 if found, -EINVAL if cs is invalid, -ENODEV if no device attached, + * Return: 0 if found, -EINVAL if cs is invalid, -ENODEV if no device attached, * other -ve value on error */ int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp); @@ -630,7 +630,7 @@ int spi_slave_of_to_plat(struct udevice *dev, struct dm_spi_slave_plat *plat); * @bus: The SPI bus * @cs: The chip select (0..n-1) * @info: Returns information about the chip select, if valid - * @return 0 if OK (and @info is set up), -ENODEV if the chip select + * Return: 0 if OK (and @info is set up), -ENODEV if the chip select * is invalid, other -ve value on error */ int spi_cs_info(struct udevice *bus, uint cs, struct spi_cs_info *info); @@ -649,7 +649,7 @@ struct sandbox_state; * @bus: SPI bus requesting the emulator * @slave: SPI slave device requesting the emulator * @emuip: Returns pointer to emulator - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int sandbox_spi_get_emul(struct sandbox_state *state, struct udevice *bus, struct udevice *slave, @@ -715,7 +715,7 @@ int dm_spi_xfer(struct udevice *dev, unsigned int bitlen, * @map_sizep: Returns size of mapped SPI * @offsetp: Returns start offset of SPI flash where the map works * correctly (offsets before this are not visible) - * @return 0 if OK, -ENOSYS if no operation, -EFAULT if memory mapping is not + * Return: 0 if OK, -ENOSYS if no operation, -EFAULT if memory mapping is not * available */ int dm_spi_get_mmap(struct udevice *dev, ulong *map_basep, uint *map_sizep, diff --git a/include/spi_flash.h b/include/spi_flash.h index 4566feab63..d33d0dd46a 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -47,7 +47,7 @@ struct dm_spi_flash_ops { * @offset: Offset into device in bytes to read from * @len: Number of bytes to read * @buf: Buffer to put the data that is read - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf);

@@ -58,7 +58,7 @@ int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf); * @offset: Offset into device in bytes to write to * @len: Number of bytes to write * @buf: Buffer containing bytes to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len, const void *buf); @@ -71,7 +71,7 @@ int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len, * @dev: SPI flash device * @offset: Offset into device in bytes to start erasing * @len: Number of bytes to erase - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);

@@ -83,7 +83,7 @@ int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len); * defined. * * @dev: SPI flash device - * @return 0 if no region is write-protected, 1 if a region is + * Return: 0 if no region is write-protected, 1 if a region is * write-protected, -ENOSYS if the driver does not implement this, * other -ve value on error */ @@ -97,7 +97,7 @@ int spl_flash_get_sw_write_prot(struct udevice *dev); * do this, typically with of-platdata * * @dev: SPI-flash device to probe - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int spi_flash_std_probe(struct udevice *dev);

diff --git a/include/spl.h b/include/spl.h index 0af0ee3003..9fc5ac61f8 100644 --- a/include/spl.h +++ b/include/spl.h @@ -106,7 +106,7 @@ enum u_boot_phase { * ... * } * - * @return U-Boot phase + * Return: U-Boot phase */ static inline enum u_boot_phase spl_phase(void) { @@ -127,7 +127,7 @@ static inline enum u_boot_phase spl_phase(void) /** * spl_prev_phase() - Figure out the previous U-Boot phase * - * @return the previous phase from this one, e.g. if called in SPL this returns + * Return: the previous phase from this one, e.g. if called in SPL this returns * PHASE_TPL, if TPL is enabled */ static inline enum u_boot_phase spl_prev_phase(void) @@ -144,7 +144,7 @@ static inline enum u_boot_phase spl_prev_phase(void) /** * spl_next_phase() - Figure out the next U-Boot phase * - * @return the next phase from this one, e.g. if called in TPL this returns + * Return: the next phase from this one, e.g. if called in TPL this returns * PHASE_SPL */ static inline enum u_boot_phase spl_next_phase(void) @@ -159,7 +159,7 @@ static inline enum u_boot_phase spl_next_phase(void) /** * spl_phase_name() - Get the name of the current phase * - * @return phase name + * Return: phase name */ static inline const char *spl_phase_name(enum u_boot_phase phase) { @@ -180,7 +180,7 @@ static inline const char *spl_phase_name(enum u_boot_phase phase) * spl_phase_prefix() - Get the prefix of the current phase * * @phase: Phase to look up - * @return phase prefix ("spl", "tpl", etc.) + * Return: phase prefix ("spl", "tpl", etc.) */ static inline const char *spl_phase_prefix(enum u_boot_phase phase) { @@ -291,7 +291,7 @@ ulong spl_get_image_size(void); * This returns the address that the next stage is linked to run at, i.e. * CONFIG_SPL_TEXT_BASE or CONFIG_SYS_TEXT_BASE * - * @return text-base address + * Return: text-base address */ ulong spl_get_image_text_base(void);

@@ -435,7 +435,7 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image); * * @spl_image: Image description to set up * @header image header to parse - * @return 0 if a header was correctly parsed, -ve on error + * Return: 0 if a header was correctly parsed, -ve on error */ int spl_parse_image_header(struct spl_image_info *spl_image, const struct image_header *header); @@ -484,7 +484,7 @@ void __noreturn jump_to_image_optee(struct spl_image_info *spl_image); * wants to load the kernel or U-Boot. This function should be provided by * the board. * - * @return 0 if SPL should start the kernel, 1 if U-Boot must be started + * Return: 0 if SPL should start the kernel, 1 if U-Boot must be started */ int spl_start_uboot(void);

@@ -628,7 +628,7 @@ void spl_board_init(void); * This will normally be true, but if U-Boot jumps to second U-Boot, it will * be false. This should be implemented by board-specific code. * - * @return true if U-Boot booted from SPL, else false + * Return: true if U-Boot booted from SPL, else false */ bool spl_was_boot_source(void);

@@ -637,7 +637,7 @@ bool spl_was_boot_source(void); * @param usb_index - usb controller number * @param mmc_dev - mmc device nubmer * - * @return 0 on success, otherwise error code + * Return: 0 on success, otherwise error code */ int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);

@@ -653,7 +653,7 @@ int spl_mmc_load_image(struct spl_image_info *spl_image, * @param raw_part Partition to load from (in RAW mode) * @param raw_sect Sector to load from (in RAW mode) * - * @return 0 on success, otherwise error code + * Return: 0 on success, otherwise error code */ int spl_mmc_load(struct spl_image_info *spl_image, struct spl_boot_device *bootdev, @@ -669,7 +669,7 @@ int spl_mmc_load(struct spl_image_info *spl_image, * @param raw_part Fat partition to load from * @param filename Name of file to load * - * @return 0 on success, otherwise error code + * Return: 0 on success, otherwise error code */ int spl_usb_load(struct spl_image_info *spl_image, struct spl_boot_device *bootdev, diff --git a/include/spl_gpio.h b/include/spl_gpio.h index e410e62914..e39ac3f624 100644 --- a/include/spl_gpio.h +++ b/include/spl_gpio.h @@ -36,7 +36,7 @@ * @regs: Pointer to GPIO registers * @gpio: GPIO to adjust (SoC-specific) * @pull: Pull value (SoC-specific) - * @return return 0 if OK, -ve on error + * Return: return 0 if OK, -ve on error */ int spl_gpio_set_pull(void *regs, uint gpio, int pull);

@@ -46,7 +46,7 @@ int spl_gpio_set_pull(void *regs, uint gpio, int pull); * @regs: Pointer to GPIO registers * @gpio: GPIO to adjust (SoC-specific) * @value: 0 to set the output low, 1 to set it high - * @return return 0 if OK, -ve on error + * Return: return 0 if OK, -ve on error */ int spl_gpio_output(void *regs, uint gpio, int value);

@@ -55,7 +55,7 @@ int spl_gpio_output(void *regs, uint gpio, int value); * * @regs: Pointer to GPIO registers * @gpio: GPIO to adjust (SoC-specific) - * @return return 0 if OK, -ve on error + * Return: return 0 if OK, -ve on error */ int spl_gpio_input(void *regs, uint gpio);

diff --git a/include/spmi/spmi.h b/include/spmi/spmi.h index 3242e6bbd0..3f8bba1284 100644 --- a/include/spmi/spmi.h +++ b/include/spmi/spmi.h @@ -26,7 +26,7 @@ struct dm_spmi_ops { * @usid SlaveID * @pid Peripheral ID * @reg: Register to read - * @return value read on success or negative value of errno. + * Return: value read on success or negative value of errno. */ int spmi_reg_read(struct udevice *dev, int usid, int pid, int reg);

@@ -38,7 +38,7 @@ int spmi_reg_read(struct udevice *dev, int usid, int pid, int reg); * @pid Peripheral ID * @reg: Register to write * @value: Value to write - * @return 0 on success or negative value of errno. + * Return: 0 on success or negative value of errno. */ int spmi_reg_write(struct udevice *dev, int usid, int pid, int reg, uint8_t value); diff --git a/include/syscon.h b/include/syscon.h index 2e02199c05..f5e6cc1a4b 100644 --- a/include/syscon.h +++ b/include/syscon.h @@ -43,7 +43,7 @@ struct syscon_base_plat { * * @dev: Device to check (UCLASS_SCON) * @info: Returns regmap for the device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ struct regmap *syscon_get_regmap(struct udevice *dev);

@@ -56,7 +56,7 @@ struct regmap *syscon_get_regmap(struct udevice *dev); * * @driver_data: Driver data value to look up * @devp: Returns the controller correponding to @driver_data - * @return 0 on success, -ENODEV if the ID was not found, or other -ve error + * Return: 0 on success, -ENODEV if the ID was not found, or other -ve error * code */ int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp); @@ -69,7 +69,7 @@ int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp); * are in use. This function looks up the regmap given this driver data. * * @driver_data: Driver data value to look up - * @return register map correponding to @driver_data, or -ve error code + * Return: register map correponding to @driver_data, or -ve error code */ struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data);

@@ -81,7 +81,7 @@ struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data); * * @dev: Device using the system controller * @name: Name of property referring to the system controller - * @return A pointer to the regmap if found, ERR_PTR(-ve) on error + * Return: A pointer to the regmap if found, ERR_PTR(-ve) on error */ struct regmap *syscon_regmap_lookup_by_phandle(struct udevice *dev, const char *name); @@ -90,7 +90,7 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct udevice *dev, * syscon_get_first_range() - get the first memory range from a syscon regmap * * @driver_data: Driver data value to look up - * @return first region of register map correponding to @driver_data, or + * Return: first region of register map correponding to @driver_data, or * -ve error code */ void *syscon_get_first_range(ulong driver_data); diff --git a/include/test/suites.h b/include/test/suites.h index d35cd83a4e..6553a765c6 100644 --- a/include/test/suites.h +++ b/include/test/suites.h @@ -20,7 +20,7 @@ struct unit_test; * @argc: Argument count provided. Must be >= 1. If this is 1 then all * tests are run, otherwise only the one named @argv[1] is run. * @argv: Arguments: argv[1] is the test to run (if @argc >= 2) - * @return 0 if OK, CMD_RET_FAILURE on failure + * Return: 0 if OK, CMD_RET_FAILURE on failure */ int cmd_ut_category(const char *name, const char *prefix, struct unit_test *tests, int n_ents, diff --git a/include/test/ut.h b/include/test/ut.h index fb2e5fcff2..18740f5807 100644 --- a/include/test/ut.h +++ b/include/test/ut.h @@ -52,7 +52,7 @@ void ut_failf(struct unit_test_state *uts, const char *fname, int line, * * @uts: Test state * @fmt: printf() format string for the error, followed by args - * @return 0 if OK, other value on error + * Return: 0 if OK, other value on error */ int ut_check_console_line(struct unit_test_state *uts, const char *fmt, ...) __attribute__ ((format (__printf__, 2, 3))); @@ -69,7 +69,7 @@ int ut_check_console_line(struct unit_test_state *uts, const char *fmt, ...) * * @uts: Test state * @fmt: printf() format string for the error, followed by args - * @return 0 if OK, other value on error + * Return: 0 if OK, other value on error */ int ut_check_console_linen(struct unit_test_state *uts, const char *fmt, ...) __attribute__ ((format (__printf__, 2, 3))); @@ -78,7 +78,7 @@ int ut_check_console_linen(struct unit_test_state *uts, const char *fmt, ...) * ut_check_skipline() - Check that the next console line exists and skip it * * @uts: Test state - * @return 0 if OK, other value on error + * Return: 0 if OK, other value on error */ int ut_check_skipline(struct unit_test_state *uts);

@@ -93,7 +93,7 @@ int ut_check_skipline(struct unit_test_state *uts); * * @uts: Test state * @fmt: printf() format string to look for, followed by args - * @return 0 if OK, -ENOENT if not found, other value on error + * Return: 0 if OK, -ENOENT if not found, other value on error */ int ut_check_skip_to_line(struct unit_test_state *uts, const char *fmt, ...);

@@ -104,7 +104,7 @@ int ut_check_skip_to_line(struct unit_test_state *uts, const char *fmt, ...); * from the console * * @uts: Test state - * @return 0 if OK (console has no output), other value on error + * Return: 0 if OK (console has no output), other value on error */ int ut_check_console_end(struct unit_test_state *uts);

@@ -114,7 +114,7 @@ int ut_check_console_end(struct unit_test_state *uts); * This only supports a byte dump. * * @total_bytes: Size of the expected dump in bytes` - * @return 0 if OK (looks like a dump and the length matches), other value on + * Return: 0 if OK (looks like a dump and the length matches), other value on * error */ int ut_check_console_dump(struct unit_test_state *uts, int total_bytes); @@ -332,7 +332,7 @@ int ut_check_console_dump(struct unit_test_state *uts, int total_bytes); /** * ut_check_free() - Return the number of bytes free in the malloc() pool * - * @return bytes free + * Return: bytes free */ ulong ut_check_free(void);

@@ -340,7 +340,7 @@ ulong ut_check_free(void); * ut_check_delta() - Return the number of bytes allocated/freed * * @last: Last value from ut_check_free - * @return free memory delta from @last; positive means more memory has been + * Return: free memory delta from @last; positive means more memory has been * allocated, negative means less has been allocated (i.e. some is freed) */ long ut_check_delta(ulong last); @@ -377,7 +377,7 @@ void ut_set_skip_delays(struct unit_test_state *uts, bool skip_delays); /** * test_get_state() - Get the active test state * - * @return the currently active test state, or NULL if none + * Return: the currently active test state, or NULL if none */ struct unit_test_state *test_get_state(void);

@@ -403,7 +403,7 @@ void test_set_state(struct unit_test_state *uts); * @count: Number of tests to run * @select_name: Name of a single test to run (from the list provided). If NULL * then all tests are run - * @return 0 if all tests passed, -1 if any failed + * Return: 0 if all tests passed, -1 if any failed */ int ut_run_list(const char *name, const char *prefix, struct unit_test *tests, int count, const char *select_name); diff --git a/include/time.h b/include/time.h index 3f00e68713..9deb2cf61c 100644 --- a/include/time.h +++ b/include/time.h @@ -24,7 +24,7 @@ uint64_t get_timer_us(uint64_t base); * delays of over an hour. For 64-bit machines it uses a 64-bit value. * *@base: Base time to consider - *@return elapsed time since @base + *Return: elapsed time since @base */ unsigned long get_timer_us_long(unsigned long base);

@@ -87,7 +87,7 @@ uint64_t usec_to_tick(unsigned long usec); * usec2ticks() - Convert microseconds to internal ticks * * @usec: Value of microseconds to convert - * @return Corresponding internal ticks value, calculated using get_tbclk() + * Return: Corresponding internal ticks value, calculated using get_tbclk() */ ulong usec2ticks(unsigned long usec);

@@ -95,7 +95,7 @@ ulong usec2ticks(unsigned long usec); * ticks2usec() - Convert internal ticks to microseconds * * @ticks: Value of ticks to convert - * @return Corresponding microseconds value, calculated using get_tbclk() + * Return: Corresponding microseconds value, calculated using get_tbclk() */ ulong ticks2usec(unsigned long ticks);

@@ -112,7 +112,7 @@ void wait_ticks(unsigned long ticks); /** * timer_get_us() - Get monotonic microsecond timer * - * @return value of monotonic microsecond timer + * Return: value of monotonic microsecond timer */ unsigned long timer_get_us(void);

@@ -122,7 +122,7 @@ unsigned long timer_get_us(void); * This is an internal value used by the timer on the system. Ticks increase * monotonically at the rate given by get_tbclk(). * - * @return current tick value + * Return: current tick value */ uint64_t get_ticks(void);

diff --git a/include/tmu.h b/include/tmu.h index da07a2211e..f4389f81da 100644 --- a/include/tmu.h +++ b/include/tmu.h @@ -31,7 +31,7 @@ enum tmu_status_t { * Monitors status of the TMU device and exynos temperature * * @param temp pointer to the current temperature value - * @return enum tmu_status_t value, code indicating event to execute + * Return: enum tmu_status_t value, code indicating event to execute * and -1 on error */ enum tmu_status_t tmu_monitor(int *temp); @@ -40,7 +40,7 @@ enum tmu_status_t tmu_monitor(int *temp); * Initialize TMU device * * @param blob FDT blob - * @return int value, 0 for success + * Return: int value, 0 for success */ int tmu_init(const void *blob); #endif /* _THERMAL_H_ */ diff --git a/include/tpm-common.h b/include/tpm-common.h index 998b4fbb41..a28629e701 100644 --- a/include/tpm-common.h +++ b/include/tpm-common.h @@ -220,7 +220,7 @@ int tpm_close(struct udevice *dev); * tpm_clear_and_reenable() - Force clear the TPM and reenable it * * @dev: TPM device - * @return 0 on success, -ve on failure + * Return: 0 on success, -ve on failure */ u32 tpm_clear_and_reenable(struct udevice *dev);

@@ -230,7 +230,7 @@ u32 tpm_clear_and_reenable(struct udevice *dev); * @dev: Device to check * @buf: Buffer to put the string * @size: Maximum size of buffer - * @return length of string, or -ENOSPC it no space + * Return: length of string, or -ENOSPC it no space */ int tpm_get_desc(struct udevice *dev, char *buf, int size);

@@ -263,14 +263,14 @@ int tpm_xfer(struct udevice *dev, const u8 *sendbuf, size_t send_size, * Initialize TPM device. It must be called before any TPM commands. * * @dev - TPM device - * @return 0 on success, non-0 on error. + * Return: 0 on success, non-0 on error. */ int tpm_init(struct udevice *dev);

/** * Retrieve the array containing all the v1 (resp. v2) commands. * - * @return a struct cmd_tbl array. + * Return: a struct cmd_tbl array. */ #if defined(CONFIG_TPM_V1) struct cmd_tbl *get_tpm1_commands(unsigned int *size); @@ -296,7 +296,7 @@ static inline struct cmd_tbl *get_tpm2_commands(unsigned int *size) * it supports. * * @dev: TPM device - * @return version number (TPM_V1 or TPMV2) + * Return: version number (TPM_V1 or TPMV2) */ enum tpm_version tpm_get_version(struct udevice *dev);

diff --git a/include/tpm-v1.h b/include/tpm-v1.h index fcfe1f054f..33d53fb695 100644 --- a/include/tpm-v1.h +++ b/include/tpm-v1.h @@ -287,7 +287,7 @@ struct __packed tpm_nv_data_public { * * @param dev TPM device * @param mode TPM startup mode - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_startup(struct udevice *dev, enum tpm_startup_type mode);

@@ -295,7 +295,7 @@ u32 tpm1_startup(struct udevice *dev, enum tpm_startup_type mode); * Issue a TPM_SelfTestFull command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_self_test_full(struct udevice *dev);

@@ -303,7 +303,7 @@ u32 tpm1_self_test_full(struct udevice *dev); * Issue a TPM_ContinueSelfTest command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_continue_self_test(struct udevice *dev);

@@ -316,7 +316,7 @@ u32 tpm1_continue_self_test(struct udevice *dev); * @param index index of the area * @param perm TPM_NV_ATTRIBUTES of the area * @param size size of the area - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_nv_define_space(struct udevice *dev, u32 index, u32 perm, u32 size);

@@ -329,7 +329,7 @@ u32 tpm1_nv_define_space(struct udevice *dev, u32 index, u32 perm, u32 size); * @param index index of the area * @param data output buffer of the area contents * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_nv_read_value(struct udevice *dev, u32 index, void *data, u32 count);

@@ -342,7 +342,7 @@ u32 tpm1_nv_read_value(struct udevice *dev, u32 index, void *data, u32 count); * @param index index of the area * @param data input buffer to be wrote to the area * @param length length of data bytes of input buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_nv_write_value(struct udevice *dev, u32 index, const void *data, u32 length); @@ -356,7 +356,7 @@ u32 tpm1_nv_write_value(struct udevice *dev, u32 index, const void *data, * recorded * @param out_digest 160-bit PCR value after execution of the * command - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_extend(struct udevice *dev, u32 index, const void *in_digest, void *out_digest); @@ -368,7 +368,7 @@ u32 tpm1_extend(struct udevice *dev, u32 index, const void *in_digest, * @param index index of the PCR * @param data output buffer for contents of the named PCR * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_pcr_read(struct udevice *dev, u32 index, void *data, size_t count);

@@ -378,7 +378,7 @@ u32 tpm1_pcr_read(struct udevice *dev, u32 index, void *data, size_t count); * * @param dev TPM device * @param presence TPM physical presence flag - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_tsc_physical_presence(struct udevice *dev, u16 presence);

@@ -388,7 +388,7 @@ u32 tpm1_tsc_physical_presence(struct udevice *dev, u16 presence); * @param dev TPM device * @param data output buffer for the public endorsement key * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_read_pubek(struct udevice *dev, void *data, size_t count);

@@ -396,7 +396,7 @@ u32 tpm1_read_pubek(struct udevice *dev, void *data, size_t count); * Issue a TPM_ForceClear command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_force_clear(struct udevice *dev);

@@ -404,7 +404,7 @@ u32 tpm1_force_clear(struct udevice *dev); * Issue a TPM_PhysicalEnable command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_physical_enable(struct udevice *dev);

@@ -412,7 +412,7 @@ u32 tpm1_physical_enable(struct udevice *dev); * Issue a TPM_PhysicalDisable command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_physical_disable(struct udevice *dev);

@@ -421,7 +421,7 @@ u32 tpm1_physical_disable(struct udevice *dev); * * @param dev TPM device * @param state boolean state of the deactivated flag - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_physical_set_deactivated(struct udevice *dev, u8 state);

@@ -435,7 +435,7 @@ u32 tpm1_physical_set_deactivated(struct udevice *dev, u8 state); * limited to be 4-byte wide * @param cap output buffer for capability information * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_get_capability(struct udevice *dev, u32 cap_area, u32 sub_cap, void *cap, size_t count); @@ -445,7 +445,7 @@ u32 tpm1_get_capability(struct udevice *dev, u32 cap_area, u32 sub_cap, * * @param dev TPM device * @param auth_handle handle of the auth session - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_terminate_auth_session(struct udevice *dev, u32 auth_handle);

@@ -458,7 +458,7 @@ u32 tpm1_terminate_auth_session(struct udevice *dev, u32 auth_handle); * * @param dev TPM device * @param auth_handle pointer to the (new) auth handle or NULL. - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_oiap(struct udevice *dev, u32 *auth_handle);

@@ -466,7 +466,7 @@ u32 tpm1_oiap(struct udevice *dev, u32 *auth_handle); * Ends an active OIAP session. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_end_oiap(struct udevice *dev);

@@ -480,7 +480,7 @@ u32 tpm1_end_oiap(struct udevice *dev); * @param key_length size of the key structure * @param parent_key_usage_auth usage auth for the parent key * @param key_handle pointer to the key handle - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_load_key2_oiap(struct udevice *dev, u32 parent_handle, const void *key, size_t key_length, const void *parent_key_usage_auth, @@ -498,7 +498,7 @@ u32 tpm1_load_key2_oiap(struct udevice *dev, u32 parent_handle, const void *key, * @param pubkey_len pointer to the pub key buffer len. On entry: the size of * the provided pubkey buffer. On successful exit: the size * of the stored TPM_PUBKEY structure (iff pubkey != NULL). - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_get_pub_key_oiap(struct udevice *dev, u32 key_handle, const void *usage_auth, void *pubkey, @@ -509,7 +509,7 @@ u32 tpm1_get_pub_key_oiap(struct udevice *dev, u32 key_handle, * * @param dev TPM device * @param pflags Place to put permanent flags - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_get_permanent_flags(struct udevice *dev, struct tpm_permanent_flags *pflags); @@ -519,7 +519,7 @@ u32 tpm1_get_permanent_flags(struct udevice *dev, * * @param dev TPM device * @param perm Returns permissions value - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_get_permissions(struct udevice *dev, u32 index, u32 *perm);

@@ -529,7 +529,7 @@ u32 tpm1_get_permissions(struct udevice *dev, u32 index, u32 *perm); * @param dev TPM device * @param key_handle handle of the resource * @param resource_type type of the resource - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_flush_specific(struct udevice *dev, u32 key_handle, u32 resource_type);

@@ -541,7 +541,7 @@ u32 tpm1_flush_specific(struct udevice *dev, u32 key_handle, u32 resource_type); * @param auth Usage auth of the key to search for * @param pubkey_digest SHA1 hash of the pub key structure of the key * @param[out] handle The handle of the key (Non-null iff found) - * @return 0 if key was found in TPM; != 0 if not. + * Return: 0 if key was found in TPM; != 0 if not. */ u32 tpm1_find_key_sha1(struct udevice *dev, const u8 auth[20], const u8 pubkey_digest[20], u32 *handle); @@ -555,7 +555,7 @@ u32 tpm1_find_key_sha1(struct udevice *dev, const u8 auth[20], * @param dev TPM device * @param data output buffer for the random bytes * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm1_get_random(struct udevice *dev, void *data, u32 count);

@@ -563,7 +563,7 @@ u32 tpm1_get_random(struct udevice *dev, void *data, u32 count); * tpm_finalise_physical_presence() - Finalise physical presence * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm1_finalise_physical_presence(struct udevice *dev);

@@ -571,7 +571,7 @@ u32 tpm1_finalise_physical_presence(struct udevice *dev); * tpm_nv_enable_locking() - lock the non-volatile space * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm1_nv_set_locked(struct udevice *dev);

@@ -579,7 +579,7 @@ u32 tpm1_nv_set_locked(struct udevice *dev); * tpm_set_global_lock() - set the global lock * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm_set_global_lock(struct udevice *dev);

@@ -587,7 +587,7 @@ u32 tpm_set_global_lock(struct udevice *dev); * tpm_resume() - start up the TPM from resume (after suspend) * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm1_resume(struct udevice *dev);

diff --git a/include/tpm-v2.h b/include/tpm-v2.h index 4e9dd52cb6..e79c90b939 100644 --- a/include/tpm-v2.h +++ b/include/tpm-v2.h @@ -425,7 +425,7 @@ enum { * @dev TPM device * @mode TPM startup mode * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_startup(struct udevice *dev, enum tpm2_startup_types mode);

@@ -435,7 +435,7 @@ u32 tpm2_startup(struct udevice *dev, enum tpm2_startup_types mode); * @dev TPM device * @full_test Asking to perform all tests or only the untested ones * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_self_test(struct udevice *dev, enum tpm2_yes_no full_test);

@@ -447,7 +447,7 @@ u32 tpm2_self_test(struct udevice *dev, enum tpm2_yes_no full_test); * @pw Password * @pw_sz Length of the password * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_clear(struct udevice *dev, u32 handle, const char *pw, const ssize_t pw_sz); @@ -463,7 +463,7 @@ u32 tpm2_clear(struct udevice *dev, u32 handle, const char *pw, * @nv_attributes TPM_NV_ATTRIBUTES of the area * @nv_policy policy to use * @nv_policy_size size of the policy - * @return return code of the operation + * Return: return code of the operation */ u32 tpm2_nv_define_space(struct udevice *dev, u32 space_index, size_t space_size, u32 nv_attributes, @@ -478,7 +478,7 @@ u32 tpm2_nv_define_space(struct udevice *dev, u32 space_index, * @digest Value representing the event to be recorded * @digest_len len of the hash * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_pcr_extend(struct udevice *dev, u32 index, u32 algorithm, const u8 *digest, u32 digest_len); @@ -490,7 +490,7 @@ u32 tpm2_pcr_extend(struct udevice *dev, u32 index, u32 algorithm, * @index Index of data to read * @data Place to put data * @count Number of bytes of data - * @return code of the operation + * Return: code of the operation */ u32 tpm2_nv_read_value(struct udevice *dev, u32 index, void *data, u32 count);

@@ -501,7 +501,7 @@ u32 tpm2_nv_read_value(struct udevice *dev, u32 index, void *data, u32 count); * @index Index of data to write * @data Data to write * @count Number of bytes of data - * @return code of the operation + * Return: code of the operation */ u32 tpm2_nv_write_value(struct udevice *dev, u32 index, const void *data, u32 count); @@ -517,7 +517,7 @@ u32 tpm2_nv_write_value(struct udevice *dev, u32 index, const void *data, * @digest_len len of the data * @updates Optional out parameter: number of updates for this PCR * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_pcr_read(struct udevice *dev, u32 idx, unsigned int idx_min_sz, u16 algorithm, void *data, u32 digest_len, @@ -533,7 +533,7 @@ u32 tpm2_pcr_read(struct udevice *dev, u32 idx, unsigned int idx_min_sz, * @buf Output buffer for capability information * @prop_count Size of output buffer * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_get_capability(struct udevice *dev, u32 capability, u32 property, void *buf, size_t prop_count); @@ -545,7 +545,7 @@ u32 tpm2_get_capability(struct udevice *dev, u32 capability, u32 property, * @pw Password * @pw_sz Length of the password * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_dam_reset(struct udevice *dev, const char *pw, const ssize_t pw_sz);

@@ -559,7 +559,7 @@ u32 tpm2_dam_reset(struct udevice *dev, const char *pw, const ssize_t pw_sz); * @recovery_time Time before decrementation of the failure count * @lockout_recovery Time to wait after a lockout * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_dam_parameters(struct udevice *dev, const char *pw, const ssize_t pw_sz, unsigned int max_tries, @@ -576,7 +576,7 @@ u32 tpm2_dam_parameters(struct udevice *dev, const char *pw, * @oldpw Old password * @oldpw_sz Length of the old password * - * @return code of the operation + * Return: code of the operation */ int tpm2_change_auth(struct udevice *dev, u32 handle, const char *newpw, const ssize_t newpw_sz, const char *oldpw, @@ -591,7 +591,7 @@ int tpm2_change_auth(struct udevice *dev, u32 handle, const char *newpw, * @index Index of the PCR * @digest New key to access the PCR * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_pcr_setauthpolicy(struct udevice *dev, const char *pw, const ssize_t pw_sz, u32 index, const char *key); @@ -606,7 +606,7 @@ u32 tpm2_pcr_setauthpolicy(struct udevice *dev, const char *pw, * @digest New key to access the PCR * @key_sz Length of the new key * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_pcr_setauthvalue(struct udevice *dev, const char *pw, const ssize_t pw_sz, u32 index, const char *key, @@ -619,7 +619,7 @@ u32 tpm2_pcr_setauthvalue(struct udevice *dev, const char *pw, * @param data output buffer for the random bytes * @param count size of output buffer * - * @return return code of the operation + * Return: return code of the operation */ u32 tpm2_get_random(struct udevice *dev, void *data, u32 count);

@@ -630,7 +630,7 @@ u32 tpm2_get_random(struct udevice *dev, void *data, u32 count); * * @dev TPM device * @index Index of data to lock - * @return code of the operation + * Return: code of the operation */ u32 tpm2_write_lock(struct udevice *dev, u32 index);

@@ -641,7 +641,7 @@ u32 tpm2_write_lock(struct udevice *dev, u32 index); * before calling the kernel. * * @dev TPM device - * @return code of the operation + * Return: code of the operation */ u32 tpm2_disable_platform_hierarchy(struct udevice *dev);

@@ -653,7 +653,7 @@ u32 tpm2_disable_platform_hierarchy(struct udevice *dev); * @recvbuf: Buffer to save the response to * @recv_size: Pointer to the size of the response buffer * - * @return code of the operation + * Return: code of the operation */ u32 tpm2_submit_command(struct udevice *dev, const u8 *sendbuf, u8 *recvbuf, size_t *recv_size); diff --git a/include/tpm_api.h b/include/tpm_api.h index f13d98cae4..ef45b43a8f 100644 --- a/include/tpm_api.h +++ b/include/tpm_api.h @@ -16,7 +16,7 @@ * * @param dev TPM device * @param mode TPM startup mode - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_startup(struct udevice *dev, enum tpm_startup_type mode);

@@ -24,7 +24,7 @@ u32 tpm_startup(struct udevice *dev, enum tpm_startup_type mode); * Issue a TPM_SelfTestFull command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_self_test_full(struct udevice *dev);

@@ -32,7 +32,7 @@ u32 tpm_self_test_full(struct udevice *dev); * Issue a TPM_ContinueSelfTest command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_continue_self_test(struct udevice *dev);

@@ -45,7 +45,7 @@ u32 tpm_continue_self_test(struct udevice *dev); * @param index index of the area * @param perm TPM_NV_ATTRIBUTES of the area * @param size size of the area - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_nv_define_space(struct udevice *dev, u32 index, u32 perm, u32 size);

@@ -58,7 +58,7 @@ u32 tpm_nv_define_space(struct udevice *dev, u32 index, u32 perm, u32 size); * @param index index of the area * @param data output buffer of the area contents * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_nv_read_value(struct udevice *dev, u32 index, void *data, u32 count);

@@ -71,7 +71,7 @@ u32 tpm_nv_read_value(struct udevice *dev, u32 index, void *data, u32 count); * @param index index of the area * @param data input buffer to be wrote to the area * @param length length of data bytes of input buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_nv_write_value(struct udevice *dev, u32 index, const void *data, u32 length); @@ -85,7 +85,7 @@ u32 tpm_nv_write_value(struct udevice *dev, u32 index, const void *data, * recorded * @param out_digest 160-bit PCR value after execution of the * command - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_pcr_extend(struct udevice *dev, u32 index, const void *in_digest, void *out_digest); @@ -97,7 +97,7 @@ u32 tpm_pcr_extend(struct udevice *dev, u32 index, const void *in_digest, * @param index index of the PCR * @param data output buffer for contents of the named PCR * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_pcr_read(struct udevice *dev, u32 index, void *data, size_t count);

@@ -107,7 +107,7 @@ u32 tpm_pcr_read(struct udevice *dev, u32 index, void *data, size_t count); * * @param dev TPM device * @param presence TPM physical presence flag - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_tsc_physical_presence(struct udevice *dev, u16 presence);

@@ -117,7 +117,7 @@ u32 tpm_tsc_physical_presence(struct udevice *dev, u16 presence); * @param dev TPM device * @param data output buffer for the public endorsement key * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_read_pubek(struct udevice *dev, void *data, size_t count);

@@ -125,7 +125,7 @@ u32 tpm_read_pubek(struct udevice *dev, void *data, size_t count); * Issue a TPM_ForceClear command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_force_clear(struct udevice *dev);

@@ -133,7 +133,7 @@ u32 tpm_force_clear(struct udevice *dev); * Issue a TPM_PhysicalEnable command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_physical_enable(struct udevice *dev);

@@ -141,7 +141,7 @@ u32 tpm_physical_enable(struct udevice *dev); * Issue a TPM_PhysicalDisable command. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_physical_disable(struct udevice *dev);

@@ -150,7 +150,7 @@ u32 tpm_physical_disable(struct udevice *dev); * * @param dev TPM device * @param state boolean state of the deactivated flag - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_physical_set_deactivated(struct udevice *dev, u8 state);

@@ -164,7 +164,7 @@ u32 tpm_physical_set_deactivated(struct udevice *dev, u8 state); * limited to be 4-byte wide * @param cap output buffer for capability information * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_get_capability(struct udevice *dev, u32 cap_area, u32 sub_cap, void *cap, size_t count); @@ -174,7 +174,7 @@ u32 tpm_get_capability(struct udevice *dev, u32 cap_area, u32 sub_cap, * * @param dev TPM device * @param auth_handle handle of the auth session - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_terminate_auth_session(struct udevice *dev, u32 auth_handle);

@@ -187,7 +187,7 @@ u32 tpm_terminate_auth_session(struct udevice *dev, u32 auth_handle); * * @param dev TPM device * @param auth_handle pointer to the (new) auth handle or NULL. - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_oiap(struct udevice *dev, u32 *auth_handle);

@@ -195,7 +195,7 @@ u32 tpm_oiap(struct udevice *dev, u32 *auth_handle); * Ends an active OIAP session. * * @param dev TPM device - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_end_oiap(struct udevice *dev);

@@ -209,7 +209,7 @@ u32 tpm_end_oiap(struct udevice *dev); * @param key_length size of the key structure * @param parent_key_usage_auth usage auth for the parent key * @param key_handle pointer to the key handle - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_load_key2_oiap(struct udevice *dev, u32 parent_handle, const void *key, size_t key_length, const void *parent_key_usage_auth, @@ -227,7 +227,7 @@ u32 tpm_load_key2_oiap(struct udevice *dev, u32 parent_handle, const void *key, * @param pubkey_len pointer to the pub key buffer len. On entry: the size of * the provided pubkey buffer. On successful exit: the size * of the stored TPM_PUBKEY structure (iff pubkey != NULL). - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_get_pub_key_oiap(struct udevice *dev, u32 key_handle, const void *usage_auth, void *pubkey, @@ -238,7 +238,7 @@ u32 tpm_get_pub_key_oiap(struct udevice *dev, u32 key_handle, * * @param dev TPM device * @param perm Returns permissions value - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_get_permissions(struct udevice *dev, u32 index, u32 *perm);

@@ -248,7 +248,7 @@ u32 tpm_get_permissions(struct udevice *dev, u32 index, u32 *perm); * @param dev TPM device * @param key_handle handle of the resource * @param resource_type type of the resource - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_flush_specific(struct udevice *dev, u32 key_handle, u32 resource_type);

@@ -260,7 +260,7 @@ u32 tpm_flush_specific(struct udevice *dev, u32 key_handle, u32 resource_type); * @param auth Usage auth of the key to search for * @param pubkey_digest SHA1 hash of the pub key structure of the key * @param[out] handle The handle of the key (Non-null iff found) - * @return 0 if key was found in TPM; != 0 if not. + * Return: 0 if key was found in TPM; != 0 if not. */ u32 tpm_find_key_sha1(struct udevice *dev, const u8 auth[20], const u8 pubkey_digest[20], u32 *handle); @@ -274,7 +274,7 @@ u32 tpm_find_key_sha1(struct udevice *dev, const u8 auth[20], * @param dev TPM device * @param data output buffer for the random bytes * @param count size of output buffer - * @return return code of the operation + * Return: return code of the operation */ u32 tpm_get_random(struct udevice *dev, void *data, u32 count);

@@ -282,7 +282,7 @@ u32 tpm_get_random(struct udevice *dev, void *data, u32 count); * tpm_finalise_physical_presence() - Finalise physical presence * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm_finalise_physical_presence(struct udevice *dev);

@@ -290,7 +290,7 @@ u32 tpm_finalise_physical_presence(struct udevice *dev); * tpm_nv_enable_locking() - lock the non-volatile space * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm_nv_enable_locking(struct udevice *dev);

@@ -298,7 +298,7 @@ u32 tpm_nv_enable_locking(struct udevice *dev); * tpm_set_global_lock() - set the global lock * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm_set_global_lock(struct udevice *dev);

@@ -307,7 +307,7 @@ u32 tpm_set_global_lock(struct udevice *dev); * * @param dev TPM device * @param index Index of space to lock - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm_write_lock(struct udevice *dev, u32 index);

@@ -315,7 +315,7 @@ u32 tpm_write_lock(struct udevice *dev, u32 index); * tpm_resume() - start up the TPM from resume (after suspend) * * @param dev TPM device - * @return return code of the operation (0 = success) + * Return: return code of the operation (0 = success) */ u32 tpm_resume(struct udevice *dev);

diff --git a/include/tps6586x.h b/include/tps6586x.h index aa4270c65e..b89074b8ac 100644 --- a/include/tps6586x.h +++ b/include/tps6586x.h @@ -20,7 +20,7 @@ enum { * Enable PWM mode for selected SM0-2 * * @param mask Mask of synchronous converter to enable (TPS6586X_PWM_...) - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int tps6586x_set_pwm_mode(int mask);

@@ -36,7 +36,7 @@ int tps6586x_set_pwm_mode(int mask); * If this condition is not met, no adjustment will be * done and an error will be reported. Use -1 to skip * this check. - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate, int min_sm0_over_sm1); @@ -46,7 +46,7 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate, * on the device. This function must be called before using other functions. * * @param bus I2C bus containing the TPS6586X chip - * @return 0 (always succeeds) + * Return: 0 (always succeeds) */ int tps6586x_init(struct udevice *bus);

diff --git a/include/trace.h b/include/trace.h index 606dba9768..e7aee024f0 100644 --- a/include/trace.h +++ b/include/trace.h @@ -55,7 +55,7 @@ void trace_print_stats(void); * @param buff Buffer in which to place data, or NULL to count size * @param buff_size Size of buffer * @param needed Returns number of bytes used / needed - * @return 0 if ok, -1 on error (buffer exhausted) + * Return: 0 if ok, -1 on error (buffer exhausted) */ int trace_list_functions(void *buff, size_t buff_size, size_t *needed);

diff --git a/include/u-boot/crc.h b/include/u-boot/crc.h index bfd477f31d..52ec6a9e2d 100644 --- a/include/u-boot/crc.h +++ b/include/u-boot/crc.h @@ -21,7 +21,7 @@ * @crc_start: CRC8 start value * @vptr: Buffer to checksum * @len: Length of buffer in bytes - * @return CRC8 checksum + * Return: CRC8 checksum */ unsigned int crc8(unsigned int crc_start, const unsigned char *vptr, int len);

@@ -48,7 +48,7 @@ void crc16_ccitt_wd_buf(const uint8_t *in, uint len, * calculation) * @buf: Bytes to checksum * @len: Number of bytes to checksum - * @return checksum value + * Return: checksum value */ uint32_t crc32(uint32_t crc, const unsigned char *buf, uint len);

@@ -63,7 +63,7 @@ uint32_t crc32(uint32_t crc, const unsigned char *buf, uint len); * @buf: Bytes to checksum * @len: Number of bytes to checksum * @chunk_sz: Chunk size to use between watchdog resets - * @return checksum + * Return: checksum */ uint32_t crc32_wd(uint32_t crc, const unsigned char *buf, uint len, uint chunk_sz); @@ -78,7 +78,7 @@ uint32_t crc32_wd(uint32_t crc, const unsigned char *buf, uint len, * calculation) * @buf: Bytes to checksum * @len: Number of bytes to checksum - * @return checksum value + * Return: checksum value */ uint32_t crc32_no_comp(uint32_t crc, const unsigned char *buf, uint len);

@@ -115,7 +115,7 @@ void crc32c_init(uint32_t *crc32c_table, uint32_t pol); * @data: Data bytes to checksum * @length: Number of bytes to process * @crc32c_table:: CRC table - * @return checksum value + * Return: checksum value */ uint32_t crc32c_cal(uint32_t crc, const char *data, int length, uint32_t *crc32c_table); diff --git a/include/u-boot/ecdsa.h b/include/u-boot/ecdsa.h index f6951c7346..0ceb0c1a08 100644 --- a/include/u-boot/ecdsa.h +++ b/include/u-boot/ecdsa.h @@ -57,7 +57,7 @@ int ecdsa_add_verify_data(struct image_sign_info *info, void *keydest); * @data_len: Data length * @sig: Signature * @sig_len: Number of bytes in signature - * @return 0 if verified, -ve on error + * Return: 0 if verified, -ve on error */ int ecdsa_verify(struct image_sign_info *info, const struct image_region region[], int region_count, diff --git a/include/u-boot/fdt-libcrypto.h b/include/u-boot/fdt-libcrypto.h index 5142f37039..b15d8a1eaf 100644 --- a/include/u-boot/fdt-libcrypto.h +++ b/include/u-boot/fdt-libcrypto.h @@ -19,7 +19,7 @@ * @prop_name: What to call the property in the FDT * @num: pointer to a libcrypto big number * @num_bits: How big is 'num' in bits? - * @return 0 if all good all working, -ve on horror + * Return: 0 if all good all working, -ve on horror */ int fdt_add_bignum(void *blob, int noffset, const char *prop_name, BIGNUM *num, int num_bits); diff --git a/include/u-boot/hash-checksum.h b/include/u-boot/hash-checksum.h index 7f16b37a9a..bcc6ba48fc 100644 --- a/include/u-boot/hash-checksum.h +++ b/include/u-boot/hash-checksum.h @@ -21,7 +21,7 @@ struct image_region; * @region_count: Number of regions in the region array * @checksum: Buffer contanining the output hash * - * @return 0 if OK, < 0 if error + * Return: 0 if OK, < 0 if error */ int hash_calculate(const char *name, const struct image_region *region, int region_count, diff --git a/include/u-boot/lz4.h b/include/u-boot/lz4.h index 1276fb98a3..e18b39a5dc 100644 --- a/include/u-boot/lz4.h +++ b/include/u-boot/lz4.h @@ -13,7 +13,7 @@ * @srcn: Length of source data * @dst: Destination for uncompressed data * @dstn: Returns length of uncompressed data - * @return 0 if OK, -EPROTONOSUPPORT if the magic number or version number are + * Return: 0 if OK, -EPROTONOSUPPORT if the magic number or version number are * not recognised or independent blocks are used, -EINVAL if the reserved * fields are non-zero, or input is overrun, -EENOBUFS if the destination * buffer is overrun, -EEPROTO if the compressed data causes an error in diff --git a/include/u-boot/rsa.h b/include/u-boot/rsa.h index 7556aa5b4b..2ed2ac7e53 100644 --- a/include/u-boot/rsa.h +++ b/include/u-boot/rsa.h @@ -75,7 +75,7 @@ int rsa_add_verify_data(struct image_sign_info *info, void *keydest); * @hash: Hash according to algorithm specified in @info * @sig: Signature * @sig_len: Number of bytes in signature - * @return 0 if verified, -ve on error + * Return: 0 if verified, -ve on error */ int rsa_verify_hash(struct image_sign_info *info, const uint8_t *hash, uint8_t *sig, uint sig_len); @@ -90,7 +90,7 @@ int rsa_verify_hash(struct image_sign_info *info, * @data_len: Data length * @sig: Signature * @sig_len: Number of bytes in signature - * @return 0 if verified, -ve on error + * Return: 0 if verified, -ve on error */ int rsa_verify(struct image_sign_info *info, const struct image_region region[], int region_count, diff --git a/include/ufs.h b/include/ufs.h index bda135cf18..702b8359db 100644 --- a/include/ufs.h +++ b/include/ufs.h @@ -7,7 +7,7 @@ struct udevice; /** * ufs_probe() - initialize all devices in the UFS uclass * - * @return 0 if Ok, -ve on error + * Return: 0 if Ok, -ve on error */ int ufs_probe(void);

@@ -16,7 +16,7 @@ int ufs_probe(void); * * @index: index in the uclass sequence * - * @return 0 if successfully probed, -ve on error + * Return: 0 if successfully probed, -ve on error */ int ufs_probe_dev(int index);

@@ -26,7 +26,7 @@ int ufs_probe_dev(int index); * @ufs_dev: UFS device * @scsi_devp: Pointer to scsi device * - * @return 0 if Ok, -ve on error + * Return: 0 if Ok, -ve on error */ int ufs_scsi_bind(struct udevice *ufs_dev, struct udevice **scsi_devp); #endif diff --git a/include/usb.h b/include/usb.h index b3851fdb4f..f032de8af9 100644 --- a/include/usb.h +++ b/include/usb.h @@ -832,7 +832,7 @@ struct usb_device *usb_get_dev_index(struct udevice *bus, int index); * @do_read: true to read the device descriptor before an address is set * (should be false for XHCI buses, true otherwise) * @parent: Parent device (either UCLASS_USB or UCLASS_USB_HUB) - * @return 0 if OK, -ve on error */ + * Return: 0 if OK, -ve on error */ int usb_setup_device(struct usb_device *dev, bool do_read, struct usb_device *parent);

@@ -862,7 +862,7 @@ int usb_hub_scan(struct udevice *hub); * @port: Hub port number (numbered from 1) * @speed: USB speed to use for this device * @devp: Returns pointer to device if all is well - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int usb_scan_device(struct udevice *parent, int port, enum usb_device_speed speed, struct udevice **devp); @@ -874,7 +874,7 @@ int usb_scan_device(struct udevice *parent, int port, * will be a device with uclass UCLASS_USB. * * @dev: Device to check - * @return The bus, or NULL if not found (this indicates a critical error in + * Return: The bus, or NULL if not found (this indicates a critical error in * the USB stack */ struct udevice *usb_get_bus(struct udevice *dev); @@ -967,7 +967,7 @@ void usb_find_usb2_hub_address_port(struct usb_device *udev, * @devp: returns a pointer of a new device structure. With driver model this * is a device pointer, but with legacy USB this pointer is * driver-specific. - * @return 0 if OK, -ENOSPC if we have found out of room for new devices + * Return: 0 if OK, -ENOSPC if we have found out of room for new devices */ int usb_alloc_new_device(struct udevice *controller, struct usb_device **devp);

@@ -990,7 +990,7 @@ int usb_alloc_device(struct usb_device *dev); * representation of this hub can be updated. * * @dev: Hub device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int usb_update_hub_device(struct usb_device *dev);

@@ -1002,7 +1002,7 @@ int usb_update_hub_device(struct usb_device *dev); * * @dev: USB device * @size: maximum transfer bytes - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int usb_get_max_xfer_size(struct usb_device *dev, size_t *size);

@@ -1018,7 +1018,7 @@ int usb_get_max_xfer_size(struct usb_device *dev, size_t *size); * @desc_list: List of points or USB descriptors, terminated by NULL. * The first entry must be struct usb_device_descriptor, * and others follow on after that. - * @return 0 if OK, -ENOSYS if not implemented, other -ve on error + * Return: 0 if OK, -ENOSYS if not implemented, other -ve on error */ int usb_emul_setup_device(struct udevice *dev, struct usb_string *strings, void **desc_list); @@ -1029,7 +1029,7 @@ int usb_emul_setup_device(struct udevice *dev, struct usb_string *strings, * @emul: Emulator device * @udev: USB device (which the emulator is causing to appear) * See struct dm_usb_ops for details on other parameters - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int usb_emul_control(struct udevice *emul, struct usb_device *udev, unsigned long pipe, void *buffer, int length, @@ -1041,7 +1041,7 @@ int usb_emul_control(struct udevice *emul, struct usb_device *udev, * @emul: Emulator device * @udev: USB device (which the emulator is causing to appear) * See struct dm_usb_ops for details on other parameters - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int usb_emul_bulk(struct udevice *emul, struct usb_device *udev, unsigned long pipe, void *buffer, int length); @@ -1052,7 +1052,7 @@ int usb_emul_bulk(struct udevice *emul, struct usb_device *udev, * @emul: Emulator device * @udev: USB device (which the emulator is causing to appear) * See struct dm_usb_ops for details on other parameters - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int usb_emul_int(struct udevice *emul, struct usb_device *udev, unsigned long pipe, void *buffer, int length, int interval, @@ -1067,7 +1067,7 @@ int usb_emul_int(struct udevice *emul, struct usb_device *udev, * @pipe: Describes pipe being used, and includes the device number * @port1: Describes port number on the parent hub * @emulp: Returns pointer to emulator, or NULL if not found - * @return 0 if found, -ve on error + * Return: 0 if found, -ve on error */ int usb_emul_find(struct udevice *bus, ulong pipe, int port1, struct udevice **emulp); @@ -1077,7 +1077,7 @@ int usb_emul_find(struct udevice *bus, ulong pipe, int port1, * * @dev: USB device to check * @emulp: Returns pointer to emulator, or NULL if not found - * @return 0 if found, -ve on error + * Return: 0 if found, -ve on error */ int usb_emul_find_for_dev(struct udevice *dev, struct udevice **emulp);

@@ -1087,7 +1087,7 @@ int usb_emul_find_for_dev(struct udevice *dev, struct udevice **emulp); * @ptr: a pointer to a list of USB descriptor pointers * @type: type of USB descriptor to find * @index: if @type is USB_DT_CONFIG, this is the configuration value - * @return a pointer to the USB descriptor found, NULL if not found + * Return: a pointer to the USB descriptor found, NULL if not found */ struct usb_generic_descriptor **usb_emul_find_descriptor( struct usb_generic_descriptor **ptr, int type, int index); diff --git a/include/usb/xhci.h b/include/usb/xhci.h index 01e63cf0fc..ea4cf3f52b 100644 --- a/include/usb/xhci.h +++ b/include/usb/xhci.h @@ -1265,7 +1265,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, * xhci_deregister() - Unregister an XHCI controller * * @dev: Controller device - * @return 0 if registered, -ve on error + * Return: 0 if registered, -ve on error */ int xhci_deregister(struct udevice *dev);

@@ -1275,7 +1275,7 @@ int xhci_deregister(struct udevice *dev); * @dev: Controller device * @hccr: Host controller control registers * @hcor: Not sure what this means - * @return 0 if registered, -ve on error + * Return: 0 if registered, -ve on error */ int xhci_register(struct udevice *dev, struct xhci_hccr *hccr, struct xhci_hcor *hcor); diff --git a/include/usb_ether.h b/include/usb_ether.h index e85acadb7f..8c7bd06906 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -43,7 +43,7 @@ struct ueth_data { * @dev: USB device * @ss: Place to put USB ethernet data * @rxsize: Maximum size to allocate for the receive buffer - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize);

@@ -51,7 +51,7 @@ int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize); * usb_ether_deregister() - deregister a USB ethernet device * * @ueth: USB Ethernet device - * @return 0 + * Return: 0 */ int usb_ether_deregister(struct ueth_data *ueth);

@@ -62,7 +62,7 @@ int usb_ether_deregister(struct ueth_data *ueth); * * @ueth: USB Ethernet device * @rxsize: Maximum size to receive - * @return 0 if a packet was received, -EAGAIN if not, -ENOSPC if @rxsize is + * Return: 0 if a packet was received, -EAGAIN if not, -ENOSPC if @rxsize is * larger than the size passed ot usb_ether_register(), other -ve on error */ int usb_ether_receive(struct ueth_data *ueth, int rxsize); @@ -77,7 +77,7 @@ int usb_ether_receive(struct ueth_data *ueth, int rxsize); * @ueth: USB Ethernet device * @ptrp: Returns a pointer to the start of the next packet if there is * one available - * @return number of bytes available, or 0 if none + * Return: number of bytes available, or 0 if none */ int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp);

diff --git a/include/video.h b/include/video.h index 1d75a90510..48a71dc237 100644 --- a/include/video.h +++ b/include/video.h @@ -151,7 +151,7 @@ struct video_ops { * * @addrp: On entry, the top of available memory. On exit, the new top, * after allocating the required memory. - * @return 0 + * Return: 0 */ int video_reserve(ulong *addrp);

@@ -160,7 +160,7 @@ int video_reserve(ulong *addrp); * video_clear() - Clear a device's frame buffer to background color. * * @dev: Device to clear - * @return 0 + * Return: 0 */ int video_clear(struct udevice *dev); #endif /* CONFIG_DM_VIDEO */ @@ -202,7 +202,7 @@ void video_sync_all(void); * - if a coordinate is -ve then it will be offset to the * left/top of the centre by that many pixels * - if a coordinate is positive it will be used unchnaged. - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, bool align); @@ -211,7 +211,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, * video_get_xsize() - Get the width of the display in pixels * * @dev: Device to check - * @return device frame buffer width in pixels + * Return: device frame buffer width in pixels */ int video_get_xsize(struct udevice *dev);

@@ -219,7 +219,7 @@ int video_get_xsize(struct udevice *dev); * video_get_ysize() - Get the height of the display in pixels * * @dev: Device to check - * @return device frame buffer height in pixels + * Return: device frame buffer height in pixels */ int video_get_ysize(struct udevice *dev);

@@ -251,7 +251,7 @@ void video_set_default_colors(struct udevice *dev, bool invert); * @dev: Vidconsole device being updated * @from: Start/end address within the framebuffer (->fb) * @to: Other address within the frame buffer - * @return 0 if OK, -EFAULT if the start address is before the start of the + * Return: 0 if OK, -EFAULT if the start address is before the start of the * frame buffer start */ int video_sync_copy(struct udevice *dev, void *from, void *to); @@ -260,7 +260,7 @@ int video_sync_copy(struct udevice *dev, void *from, void *to); * video_sync_copy_all() - Sync the entire framebuffer to the copy * * @dev: Vidconsole device being updated - * @return 0 (always) + * Return: 0 (always) */ int video_sync_copy_all(struct udevice *dev); #else @@ -279,7 +279,7 @@ static inline int video_sync_copy_all(struct udevice *dev) /** * video_is_active() - Test if one video device it active * - * @return true if at least one video device is active, else false. + * Return: true if at least one video device is active, else false. */ bool video_is_active(void);

@@ -299,28 +299,28 @@ int video_display_bitmap(ulong bmp_image, int x, int y); /** * Get the width of the screen in pixels * - * @return width of screen in pixels + * Return: width of screen in pixels */ int video_get_pixel_width(void);

/** * Get the height of the screen in pixels * - * @return height of screen in pixels + * Return: height of screen in pixels */ int video_get_pixel_height(void);

/** * Get the number of text lines/rows on the screen * - * @return number of rows + * Return: number of rows */ int video_get_screen_rows(void);

/** * Get the number of text columns on the screen * - * @return number of columns + * Return: number of columns */ int video_get_screen_columns(void);

diff --git a/include/video_bridge.h b/include/video_bridge.h index 22e93dbb53..3b429eac57 100644 --- a/include/video_bridge.h +++ b/include/video_bridge.h @@ -70,7 +70,7 @@ struct video_bridge_ops { /** * video_bridge_attach() - attach a video bridge * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int video_bridge_attach(struct udevice *dev);

@@ -78,7 +78,7 @@ int video_bridge_attach(struct udevice *dev); * video_bridge_set_backlight() - Set the backlight brightness * * @percent: brightness percentage (0=off, 100=full brightness) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int video_bridge_set_backlight(struct udevice *dev, int percent);

@@ -94,7 +94,7 @@ int video_bridge_set_active(struct udevice *dev, bool active); * check_attached() - check if a bridge is correctly attached * * @dev: Device to check - * @return 0 if attached, -EENOTCONN if not, or other -ve error + * Return: 0 if attached, -EENOTCONN if not, or other -ve error */ int video_bridge_check_attached(struct udevice *dev);

@@ -104,7 +104,7 @@ int video_bridge_check_attached(struct udevice *dev); * @dev: Device to read from * @buf: Buffer to read into * @buf_size: Buffer size - * @return number of bytes read, <=0 for error + * Return: number of bytes read, <=0 for error */ int video_bridge_read_edid(struct udevice *dev, u8 *buf, int buf_size);

diff --git a/include/video_console.h b/include/video_console.h index 06b798ef10..5921767fbf 100644 --- a/include/video_console.h +++ b/include/video_console.h @@ -170,7 +170,7 @@ struct vidconsole_ops { * is the X position multipled by VID_FRAC_DIV. * @y: Pixel Y position (0=top-most pixel) * @ch: Character to write - * @return number of fractional pixels that the cursor should move, + * Return: number of fractional pixels that the cursor should move, * if all is OK, -EAGAIN if we ran out of space on this line, other -ve * on error */ @@ -183,7 +183,7 @@ int vidconsole_putc_xy(struct udevice *dev, uint x, uint y, char ch); * @rowdst: Destination text row (0=top) * @rowsrc: Source start text row * @count: Number of text rows to move - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int vidconsole_move_rows(struct udevice *dev, uint rowdst, uint rowsrc, uint count); @@ -196,7 +196,7 @@ int vidconsole_move_rows(struct udevice *dev, uint rowdst, uint rowsrc, * @dev: Device to adjust * @row: Text row to adjust (0=top) * @clr: Raw colour (pixel value) to write to each pixel - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int vidconsole_set_row(struct udevice *dev, uint row, int clr);

@@ -212,7 +212,7 @@ int vidconsole_set_row(struct udevice *dev, uint row, int clr); * * @dev: Device to adjust * @ch: Character to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int vidconsole_put_char(struct udevice *dev, char ch);

@@ -228,7 +228,7 @@ int vidconsole_put_char(struct udevice *dev, char ch); * * @dev: Device to adjust * @str: String to write - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int vidconsole_put_string(struct udevice *dev, const char *str);

@@ -238,7 +238,7 @@ int vidconsole_put_string(struct udevice *dev, const char *str); * @dev: Device to adjust * @col: New cursor text column * @row: New cursor text row - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ void vidconsole_position_cursor(struct udevice *dev, unsigned col, unsigned row); @@ -252,7 +252,7 @@ void vidconsole_position_cursor(struct udevice *dev, unsigned col, * * @priv private data of the console device * @idx color index - * @return color value + * Return: color value */ u32 vid_console_color(struct video_priv *priv, unsigned int idx);

@@ -268,7 +268,7 @@ u32 vid_console_color(struct video_priv *priv, unsigned int idx); * @dev: Vidconsole device being updated * @from: Start/end address within the framebuffer (->fb) * @to: Other address within the frame buffer - * @return 0 if OK, -EFAULT if the start address is before the start of the + * Return: 0 if OK, -EFAULT if the start address is before the start of the * frame buffer start */ int vidconsole_sync_copy(struct udevice *dev, void *from, void *to); @@ -283,7 +283,7 @@ int vidconsole_sync_copy(struct udevice *dev, void *from, void *to); * @dst: Destination address within the framebuffer (->fb) * @src: Source address within the framebuffer (->fb) * @size: Number of bytes to transfer - * @return 0 if OK, -EFAULT if the start address is before the start of the + * Return: 0 if OK, -EFAULT if the start address is before the start of the * frame buffer start */ int vidconsole_memmove(struct udevice *dev, void *dst, const void *src, diff --git a/include/video_osd.h b/include/video_osd.h index 01ac94b425..dc60bafa8a 100644 --- a/include/video_osd.h +++ b/include/video_osd.h @@ -125,7 +125,7 @@ struct video_osd_ops { * @dev: OSD instance to query. * @info: Pointer to a structure that takes the information read from the * OSD instance. - * @return 0 if OK, -ve on error. + * Return: 0 if OK, -ve on error. */ int video_osd_get_info(struct udevice *dev, struct video_osd_info *info);

@@ -155,7 +155,7 @@ int video_osd_get_info(struct udevice *dev, struct video_osd_info *info); * coordinate on the OSD screen. * @buflen: Length of the data in the passed buffer (in byte). * @count: Write count many repetitions of the given text data - * @return 0 if OK, -ve on error. + * Return: 0 if OK, -ve on error. */ int video_osd_set_mem(struct udevice *dev, uint col, uint row, u8 *buf, size_t buflen, uint count); @@ -167,7 +167,7 @@ int video_osd_set_mem(struct udevice *dev, uint col, uint row, u8 *buf, * @dev: OSD instance to write to. * @col The number of characters in the window's columns * @row The number of characters in the window's rows - * @return 0 if OK, -ve on error. + * Return: 0 if OK, -ve on error. */ int video_osd_set_size(struct udevice *dev, uint col, uint row);

@@ -184,7 +184,7 @@ int video_osd_set_size(struct udevice *dev, uint col, uint row); * interpretation of the value is driver-specific, and possible * values should be defined e.g. in a driver include file. * @text: The string data that should be printed on the OSD - * @return 0 if OK, -ve on error. + * Return: 0 if OK, -ve on error. */ int video_osd_print(struct udevice *dev, uint col, uint row, ulong color, char *text); diff --git a/include/virtio.h b/include/virtio.h index 34e2bfdcdd..062a24630c 100644 --- a/include/virtio.h +++ b/include/virtio.h @@ -228,7 +228,7 @@ struct virtio_dev_priv { * @offset: the offset of the configuration field * @buf: the buffer to write the field value into * @len: the length of the buffer - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_get_config(struct udevice *vdev, unsigned int offset, void *buf, unsigned int len); @@ -240,7 +240,7 @@ int virtio_get_config(struct udevice *vdev, unsigned int offset, * @offset: the offset of the configuration field * @buf: the buffer to read the field value from * @len: the length of the buffer - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_set_config(struct udevice *vdev, unsigned int offset, void *buf, unsigned int len); @@ -250,7 +250,7 @@ int virtio_set_config(struct udevice *vdev, unsigned int offset, * * @vdev: the real virtio device * @counter: the returned config generation counter - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_generation(struct udevice *vdev, u32 *counter);

@@ -259,7 +259,7 @@ int virtio_generation(struct udevice *vdev, u32 *counter); * * @vdev: the real virtio device * @status: the returned status byte - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_get_status(struct udevice *vdev, u8 *status);

@@ -268,7 +268,7 @@ int virtio_get_status(struct udevice *vdev, u8 *status); * * @vdev: the real virtio device * @status: the new status byte - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_set_status(struct udevice *vdev, u8 status);

@@ -276,7 +276,7 @@ int virtio_set_status(struct udevice *vdev, u8 status); * virtio_reset() - reset the device * * @vdev: the real virtio device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_reset(struct udevice *vdev);

@@ -285,7 +285,7 @@ int virtio_reset(struct udevice *vdev); * * @vdev: the real virtio device * @features: the first 32 feature bits (all we currently need) - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_get_features(struct udevice *vdev, u64 *features);

@@ -293,7 +293,7 @@ int virtio_get_features(struct udevice *vdev, u64 *features); * virtio_set_features() - confirm what device features we'll be using * * @vdev: the real virtio device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_set_features(struct udevice *vdev);

@@ -303,7 +303,7 @@ int virtio_set_features(struct udevice *vdev); * @vdev: the real virtio device * @nvqs: the number of virtqueues to find * @vqs: on success, includes new virtqueues - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_find_vqs(struct udevice *vdev, unsigned int nvqs, struct virtqueue *vqs[]); @@ -312,7 +312,7 @@ int virtio_find_vqs(struct udevice *vdev, unsigned int nvqs, * virtio_del_vqs() - free virtqueues found by find_vqs() * * @vdev: the real virtio device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_del_vqs(struct udevice *vdev);

@@ -321,7 +321,7 @@ int virtio_del_vqs(struct udevice *vdev); * * @vdev: the real virtio device * @vq: virtqueue to process - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_notify(struct udevice *vdev, struct virtqueue *vq);

@@ -337,7 +337,7 @@ void virtio_add_status(struct udevice *vdev, u8 status); * virtio_finalize_features() - helper to finalize features * * @vdev: the real virtio device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_finalize_features(struct udevice *vdev);

@@ -366,7 +366,7 @@ void virtio_driver_features_init(struct virtio_dev_priv *priv, /** * virtio_init() - helper to enumerate all known virtio devices * - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int virtio_init(void);

diff --git a/include/vsprintf.h b/include/vsprintf.h index 8bfafa0d33..532ef3650b 100644 --- a/include/vsprintf.h +++ b/include/vsprintf.h @@ -16,7 +16,7 @@ * @param cp The string to be converted * @param endp Updated to point to the first character not converted * @param base The number base to use (0 for the default) - * @return value decoded from string (0 if invalid) + * Return: value decoded from string (0 if invalid) * * Converts a string to an unsigned long. If there are invalid characters at * the end these are ignored. In the worst case, if all characters are invalid, @@ -36,7 +36,7 @@ ulong simple_strtoul(const char *cp, char **endp, unsigned int base); * * @param cp The string to be converted * @param endp Updated to point to the first character not converted - * @return value decoded from string (0 if invalid) + * Return: value decoded from string (0 if invalid) * * Converts a hex string to an unsigned long. If there are invalid characters at * the end these are ignored. In the worst case, if all characters are invalid, @@ -49,7 +49,7 @@ unsigned long hextoul(const char *cp, char **endp); * * @param cp The string to be converted * @param endp Updated to point to the first character not converted - * @return value decoded from string (0 if invalid) + * Return: value decoded from string (0 if invalid) * * Converts a decimal string to an unsigned long. If there are invalid * characters at the end these are ignored. In the worst case, if all characters @@ -62,7 +62,7 @@ unsigned long dectoul(const char *cp, char **endp); * @param cp The string to be converted * @param base The number base to use (0 for the default) * @param res The converted result value - * @return 0 if conversion is successful and *res is set to the converted + * Return: 0 if conversion is successful and *res is set to the converted * value, otherwise it returns -EINVAL and *res is set to 0. * * strict_strtoul converts a string to an unsigned long only if the @@ -99,7 +99,7 @@ long long simple_strtoll(const char *cp, char **endp, unsigned int base); * For example, "abc123" would return 123. * * @str: String to exxamine - * @return training number if found, else -1 + * Return: training number if found, else -1 */ long trailing_strtol(const char *str);

@@ -114,7 +114,7 @@ long trailing_strtol(const char *str); * @str: String to exxamine * @end: Pointer to end of string to examine, or NULL to use the * whole string - * @return training number if found, else -1 + * Return: training number if found, else -1 */ long trailing_strtoln(const char *str, const char *end);

@@ -164,7 +164,7 @@ int sprintf(char *buf, const char *fmt, ...) * @param buf The buffer to place the result into * @param fmt The format string to use * @param args Arguments for the format string - * @return the number of characters which have been written into + * Return: the number of characters which have been written into * the @buf not including the trailing '\0'. * * If you're not already dealing with a va_list consider using scnprintf(). @@ -181,7 +181,7 @@ int vsprintf(char *buf, const char *fmt, va_list args); * simple_... functions, so should be used immediately * * @val: Value to convert - * @return string containing the decimal representation of @val + * Return: string containing the decimal representation of @val */ char *simple_itoa(ulong val);

@@ -193,7 +193,7 @@ char *simple_itoa(ulong val); * simple_... functions, so should be used immediately * * @val: Value to convert - * @return string containing the hexecimal representation of @val + * Return: string containing the hexecimal representation of @val */ char *simple_xtoa(ulong num);

@@ -204,7 +204,7 @@ char *simple_xtoa(ulong num); * @param size The size of the buffer, including the trailing null space * @param fmt The format string to use * @param ... Arguments for the format string - * @return the number of characters which would be + * Return: the number of characters which would be * generated for the given input, excluding the trailing null, * as per ISO C99. If the return is greater than or equal to * @size, the resulting string is truncated. @@ -237,7 +237,7 @@ int scnprintf(char *buf, size_t size, const char *fmt, ...) * @param size The size of the buffer, including the trailing null space * @param fmt The format string to use * @param args Arguments for the format string - * @return The number characters which would be generated for the given + * Return: The number characters which would be generated for the given * input, excluding the trailing '\0', as per ISO C99. Note that fewer * characters may be written if this number of characters is >= size. * @@ -262,7 +262,7 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args); * @param size The size of the buffer, including the trailing null space * @param fmt The format string to use * @param args Arguments for the format string - * @return the number of characters which have been written into + * Return: the number of characters which have been written into * the @buf not including the trailing '\0'. If @size is == 0 the function * returns 0. * diff --git a/include/wait_bit.h b/include/wait_bit.h index dc2ffeb2c2..dcc5c4fd39 100644 --- a/include/wait_bit.h +++ b/include/wait_bit.h @@ -31,7 +31,7 @@ * @param set Selects wait condition (bit set or clear) * @param timeout_ms Timeout (in milliseconds) * @param breakable Enables CTRL-C interruption - * @return 0 on success, -ETIMEDOUT or -EINTR on failure + * Return: 0 on success, -ETIMEDOUT or -EINTR on failure */

#define BUILD_WAIT_FOR_BIT(sfx, type, read) \ diff --git a/include/wdt.h b/include/wdt.h index baaa9db08a..5026f5a6db 100644 --- a/include/wdt.h +++ b/include/wdt.h @@ -60,7 +60,7 @@ int wdt_reset(struct udevice *dev); * * @dev: WDT Device * @flags: Driver specific flags - * @return 0 if OK -ve on error. If wdt action is system reset, + * Return: 0 if OK -ve on error. If wdt action is system reset, * this function may never return. */ int wdt_expire_now(struct udevice *dev, ulong flags); diff --git a/lib/acpi/acpi_device.c b/lib/acpi/acpi_device.c index b5f2cebbde..1b838fdbd6 100644 --- a/lib/acpi/acpi_device.c +++ b/lib/acpi/acpi_device.c @@ -27,7 +27,7 @@ * @buf: Buffer to hold the path * @buf_len: Length of buffer * @cur: Current position in the buffer - * @return new position in buffer after adding @dev, or -ve on error + * Return: new position in buffer after adding @dev, or -ve on error */ static int acpi_device_path_fill(const struct udevice *dev, char *buf, size_t buf_len, int cur) @@ -97,7 +97,7 @@ enum acpi_dev_status acpi_device_status(const struct udevice *dev) * * Write a forward length for a large resource (2 bytes) * - * @return pointer to the zero word (for fixing up later) + * Return: pointer to the zero word (for fixing up later) */ static void *largeres_write_len_f(struct acpi_ctx *ctx) { @@ -597,7 +597,7 @@ static void acpi_device_write_i2c(struct acpi_ctx *ctx, * @dev: I2C device to convert * @i2c: Place to put the new structure * @scope: Scope of the I2C device (this is the controller path) - * @return chip address of device + * Return: chip address of device */ static int acpi_device_set_i2c(const struct udevice *dev, struct acpi_i2c *i2c, const char *scope) @@ -719,7 +719,7 @@ static void acpi_device_write_spi(struct acpi_ctx *ctx, const struct acpi_spi *s * @dev: SPI device to convert * @spi: Place to put the new structure * @scope: Scope of the SPI device (this is the controller path) - * @return 0 (always) + * Return: 0 (always) */ static int acpi_device_set_spi(const struct udevice *dev, struct acpi_spi *spi, const char *scope) diff --git a/lib/binman.c b/lib/binman.c index 530df6a4b4..cfe1e5f807 100644 --- a/lib/binman.c +++ b/lib/binman.c @@ -37,7 +37,7 @@ static struct binman_info *binman; * depends on whether multiple-images is in use. * * @nodep: Returns the node found, on success - * @return 0 if OK, , -EINVAL if there is no /binman node, -ECHILD if multiple + * Return: 0 if OK, , -EINVAL if there is no /binman node, -ECHILD if multiple * images are being used but the first image is not available */ static int find_image_node(ofnode *nodep) diff --git a/lib/efi/efi_app.c b/lib/efi/efi_app.c index 6980933d7e..1e5606c7b8 100644 --- a/lib/efi/efi_app.c +++ b/lib/efi/efi_app.c @@ -79,7 +79,7 @@ int efi_get_mmap(struct efi_mem_desc **descp, int *sizep, uint *keyp, * @device_path: EFI device path structure for this * @len: Length of @device_path in bytes * @devp: Returns the bound device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int efi_bind_block(efi_handle_t handle, struct efi_block_io *blkio, struct efi_device_path *device_path, int len, diff --git a/lib/efi/efi_stub.c b/lib/efi/efi_stub.c index 646cde3214..a35fce1385 100644 --- a/lib/efi/efi_stub.c +++ b/lib/efi/efi_stub.c @@ -152,7 +152,7 @@ static inline unsigned long read_cr3(void) * EFI we must first change to 32-bit mode. To do this we need to find the * correct code segment to use (an entry in the Global Descriptor Table). * - * @return code segment GDT offset, or 0 for 32-bit EFI, -ENOENT if not found + * Return: code segment GDT offset, or 0 for 32-bit EFI, -ENOENT if not found */ static int get_codeseg32(void) { diff --git a/lib/efi_loader/efi_acpi.c b/lib/efi_loader/efi_acpi.c index a62c34009c..83f025e1ca 100644 --- a/lib/efi_loader/efi_acpi.c +++ b/lib/efi_loader/efi_acpi.c @@ -15,7 +15,7 @@ static const efi_guid_t acpi_guid = EFI_ACPI_TABLE_GUID; /* * Install the ACPI table as a configuration table. * - * @return status code + * Return: status code */ efi_status_t efi_acpi_register(void) { diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c index 735ed0bd0f..c61f485933 100644 --- a/lib/efi_loader/efi_device_path.c +++ b/lib/efi_loader/efi_device_path.c @@ -51,7 +51,7 @@ static const struct efi_device_path_vendor ROOT = { * Determine if an MMC device is an SD card. * * @desc block device descriptor - * @return true if the device is an SD card + * Return: true if the device is an SD card */ static bool is_sd(struct blk_desc *desc) { @@ -223,7 +223,7 @@ struct efi_object *efi_dp_find_obj(struct efi_device_path *dp, * Determine the last device path node that is not the end node. * * @dp device path - * @return last node before the end node if it exists + * Return: last node before the end node if it exists * otherwise NULL */ const struct efi_device_path *efi_dp_last_node(const struct efi_device_path *dp) @@ -572,7 +572,7 @@ __maybe_unused static unsigned int dp_size(struct udevice *dev) * * @buf pointer to the end of the device path * @dev device - * @return pointer to the end of the device path + * Return: pointer to the end of the device path */ __maybe_unused static void *dp_fill(void *buf, struct udevice *dev) { diff --git a/lib/efi_loader/efi_device_path_to_text.c b/lib/efi_loader/efi_device_path_to_text.c index 57fa9d97f7..d8a83c8849 100644 --- a/lib/efi_loader/efi_device_path_to_text.c +++ b/lib/efi_loader/efi_device_path_to_text.c @@ -225,7 +225,7 @@ static char *dp_msging(char *s, struct efi_device_path *dp) * * @s output buffer * @dp device path node - * @return next unused buffer address + * Return: next unused buffer address */ static char *dp_media(char *s, struct efi_device_path *dp) { @@ -310,7 +310,7 @@ static char *dp_media(char *s, struct efi_device_path *dp) * * @buffer output buffer * @dp device path or node - * @return end of string + * Return: end of string */ static char *efi_convert_single_device_node_to_text( char *buffer, @@ -350,7 +350,7 @@ static char *efi_convert_single_device_node_to_text( * device_node device node to be converted * display_only true if the shorter text representation shall be used * allow_shortcuts true if shortcut forms may be used - * @return text representation of the device path + * Return: text representation of the device path * NULL if out of memory of device_path is NULL */ static uint16_t EFIAPI *efi_convert_device_node_to_text( @@ -383,7 +383,7 @@ out: * device_path device path to be converted * display_only true if the shorter text representation shall be used * allow_shortcuts true if shortcut forms may be used - * @return text representation of the device path + * Return: text representation of the device path * NULL if out of memory of device_path is NULL */ static uint16_t EFIAPI *efi_convert_device_path_to_text( diff --git a/lib/efi_loader/efi_device_path_utilities.c b/lib/efi_loader/efi_device_path_utilities.c index 94015329c8..a07d9bab3a 100644 --- a/lib/efi_loader/efi_device_path_utilities.c +++ b/lib/efi_loader/efi_device_path_utilities.c @@ -22,7 +22,7 @@ const efi_guid_t efi_guid_device_path_utilities_protocol = * for details. * * @device_path device path - * @return size in bytes + * Return: size in bytes */ static efi_uintn_t EFIAPI get_device_path_size( const struct efi_device_path *device_path) @@ -50,7 +50,7 @@ static efi_uintn_t EFIAPI get_device_path_size( * for details. * * @device_path device path - * @return copy of the device path + * Return: copy of the device path */ static struct efi_device_path * EFIAPI duplicate_device_path( const struct efi_device_path *device_path) @@ -70,7 +70,7 @@ static struct efi_device_path * EFIAPI duplicate_device_path( * * @src1 1st device path * @src2 2nd device path - * @return concatenated device path + * Return: concatenated device path */ static struct efi_device_path * EFIAPI append_device_path( const struct efi_device_path *src1, @@ -91,7 +91,7 @@ static struct efi_device_path * EFIAPI append_device_path( * * @device_path device path * @device_node device node - * @return concatenated device path + * Return: concatenated device path */ static struct efi_device_path * EFIAPI append_device_node( const struct efi_device_path *device_path, @@ -112,7 +112,7 @@ static struct efi_device_path * EFIAPI append_device_node( * * @device_path 1st device path * @device_path_instance 2nd device path - * @return concatenated device path + * Return: concatenated device path */ static struct efi_device_path * EFIAPI append_device_path_instance( const struct efi_device_path *device_path, @@ -134,7 +134,7 @@ static struct efi_device_path * EFIAPI append_device_path_instance( * * @device_path_instance next device path instance * @device_path_instance_size size of the device path instance - * @return concatenated device path + * Return: concatenated device path */ static struct efi_device_path * EFIAPI get_next_device_path_instance( struct efi_device_path **device_path_instance, @@ -156,7 +156,7 @@ static struct efi_device_path * EFIAPI get_next_device_path_instance( * * @device_path device path * @device_node device node - * @return concatenated device path + * Return: concatenated device path */ static bool EFIAPI is_device_path_multi_instance( const struct efi_device_path *device_path) @@ -177,7 +177,7 @@ static bool EFIAPI is_device_path_multi_instance( * @node_type node type * @node_sub_type node sub type * @node_length node length - * @return device path node + * Return: device path node */ static struct efi_device_path * EFIAPI create_device_node( uint8_t node_type, uint8_t node_sub_type, uint16_t node_length) diff --git a/lib/efi_loader/efi_memory.c b/lib/efi_loader/efi_memory.c index 7f0b507281..1c51a3fc45 100644 --- a/lib/efi_loader/efi_memory.c +++ b/lib/efi_loader/efi_memory.c @@ -452,7 +452,7 @@ static uint64_t efi_find_free_memory(uint64_t len, uint64_t max_addr) * @memory_type usage type of the allocated memory * @pages number of pages to be allocated * @memory allocated memory - * @return status code + * Return: status code */ efi_status_t efi_allocate_pages(enum efi_allocate_type type, enum efi_memory_type memory_type, @@ -680,7 +680,7 @@ efi_status_t efi_free_pool(void *buffer) * @map_key key for the memory map * @descriptor_size size of an individual memory descriptor * @descriptor_version version number of the memory descriptor structure - * @return status code + * Return: status code */ efi_status_t efi_get_memory_map(efi_uintn_t *memory_map_size, struct efi_mem_desc *memory_map, diff --git a/lib/efi_loader/efi_smbios.c b/lib/efi_loader/efi_smbios.c index fc0b23397c..306c0bc54f 100644 --- a/lib/efi_loader/efi_smbios.c +++ b/lib/efi_loader/efi_smbios.c @@ -16,7 +16,7 @@ /* * Install the SMBIOS table as a configuration table. * - * @return status code + * Return: status code */ efi_status_t efi_smbios_register(void) { diff --git a/lib/efi_selftest/dtbdump.c b/lib/efi_selftest/dtbdump.c index f6ddaa3072..ed3b985cab 100644 --- a/lib/efi_selftest/dtbdump.c +++ b/lib/efi_selftest/dtbdump.c @@ -160,7 +160,7 @@ static efi_status_t efi_input(u16 *buffer, efi_uintn_t buffer_size) * Convert FDT value to host endianness. * * @val FDT value - * @return converted value + * Return: converted value */ static u32 f2h(fdt32_t val) { diff --git a/lib/efi_selftest/efi_selftest.c b/lib/efi_selftest/efi_selftest.c index 39ee2edf5d..3da34b1d46 100644 --- a/lib/efi_selftest/efi_selftest.c +++ b/lib/efi_selftest/efi_selftest.c @@ -75,7 +75,7 @@ void efi_st_exit_boot_services(void) * * @test the test to be executed * @failures counter that will be incremented if a failure occurs - * @return EFI_ST_SUCCESS for success + * Return: EFI_ST_SUCCESS for success */ static int setup(struct efi_unit_test *test, unsigned int *failures) { @@ -100,7 +100,7 @@ static int setup(struct efi_unit_test *test, unsigned int *failures) * * @test the test to be executed * @failures counter that will be incremented if a failure occurs - * @return EFI_ST_SUCCESS for success + * Return: EFI_ST_SUCCESS for success */ static int execute(struct efi_unit_test *test, unsigned int *failures) { @@ -125,7 +125,7 @@ static int execute(struct efi_unit_test *test, unsigned int *failures) * * @test the test to be torn down * @failures counter that will be incremented if a failure occurs - * @return EFI_ST_SUCCESS for success + * Return: EFI_ST_SUCCESS for success */ static int teardown(struct efi_unit_test *test, unsigned int *failures) { diff --git a/lib/efi_selftest/efi_selftest_block_device.c b/lib/efi_selftest/efi_selftest_block_device.c index 15f03751ac..ad53dac796 100644 --- a/lib/efi_selftest/efi_selftest_block_device.c +++ b/lib/efi_selftest/efi_selftest_block_device.c @@ -57,7 +57,7 @@ static u8 *image; * Reset service of the block IO protocol. * * @this block IO protocol - * @return status code + * Return: status code */ static efi_status_t EFIAPI reset( struct efi_block_io *this, @@ -74,7 +74,7 @@ static efi_status_t EFIAPI reset( * @lba start of the read in logical blocks * @buffer_size number of bytes to read * @buffer target buffer - * @return status code + * Return: status code */ static efi_status_t EFIAPI read_blocks( struct efi_block_io *this, u32 media_id, u64 lba, @@ -99,7 +99,7 @@ static efi_status_t EFIAPI read_blocks( * @lba start of the write in logical blocks * @buffer_size number of bytes to read * @buffer source buffer - * @return status code + * Return: status code */ static efi_status_t EFIAPI write_blocks( struct efi_block_io *this, u32 media_id, u64 lba, @@ -120,7 +120,7 @@ static efi_status_t EFIAPI write_blocks( * Flush service of the block IO protocol. * * @this block IO protocol - * @return status code + * Return: status code */ static efi_status_t EFIAPI flush_blocks(struct efi_block_io *this) { @@ -131,7 +131,7 @@ static efi_status_t EFIAPI flush_blocks(struct efi_block_io *this) * Decompress the disk image. * * @image decompressed disk image - * @return status code + * Return: status code */ static efi_status_t decompress(u8 **image) { @@ -278,7 +278,7 @@ static int teardown(void) * Get length of device path without end tag. * * @dp device path - * @return length of device path in bytes + * Return: length of device path in bytes */ static efi_uintn_t dp_size(struct efi_device_path *dp) { diff --git a/lib/efi_selftest/efi_selftest_controllers.c b/lib/efi_selftest/efi_selftest_controllers.c index 38720bb63d..d2bbd1c4f6 100644 --- a/lib/efi_selftest/efi_selftest_controllers.c +++ b/lib/efi_selftest/efi_selftest_controllers.c @@ -35,7 +35,7 @@ static efi_handle_t handle_driver; * @handle handle on which child controllers are installed * @protocol protocol for which the child controllers were installed * @count number of child controllers - * @return status code + * Return: status code */ static efi_status_t count_child_controllers(efi_handle_t handle, efi_guid_t *protocol, @@ -69,7 +69,7 @@ static efi_status_t count_child_controllers(efi_handle_t handle, * @this driver binding protocol * @controller_handle handle of the controller * @remaining_device_path path specifying the child controller - * @return status code + * Return: status code */ static efi_status_t EFIAPI supported( struct efi_driver_binding_protocol *this, @@ -106,7 +106,7 @@ static efi_status_t EFIAPI supported( * @this driver binding protocol * @controller_handle handle of the controller * @remaining_device_path path specifying the child controller - * @return status code + * Return: status code */ static efi_status_t EFIAPI start( struct efi_driver_binding_protocol *this, @@ -161,7 +161,7 @@ static efi_status_t EFIAPI start( * * @controller_handle parent controller * @child_handle child controller - * @return status code + * Return: status code */ static efi_status_t disconnect_child(efi_handle_t controller_handle, efi_handle_t child_handle) @@ -191,7 +191,7 @@ static efi_status_t disconnect_child(efi_handle_t controller_handle, * @controller_handle handle of the controller * @number_of_children number of child controllers to remove * @child_handle_buffer handles of the child controllers to remove - * @return status code + * Return: status code */ static efi_status_t EFIAPI stop( struct efi_driver_binding_protocol *this, diff --git a/lib/efi_selftest/efi_selftest_exception.c b/lib/efi_selftest/efi_selftest_exception.c index 6e900a35dc..d86228a892 100644 --- a/lib/efi_selftest/efi_selftest_exception.c +++ b/lib/efi_selftest/efi_selftest_exception.c @@ -63,7 +63,7 @@ static u8 *image; * Decompress the disk image. * * @image decompressed disk image - * @return status code + * Return: status code */ static efi_status_t decompress(u8 **image) { diff --git a/lib/efi_selftest/efi_selftest_fdt.c b/lib/efi_selftest/efi_selftest_fdt.c index 412ba286ea..739f029b8c 100644 --- a/lib/efi_selftest/efi_selftest_fdt.c +++ b/lib/efi_selftest/efi_selftest_fdt.c @@ -51,7 +51,7 @@ static uint32_t f2h(fdt32_t val) * * @property name of the property * @node name of the node or NULL for root node - * @return value of the property + * Return: value of the property */ static char *get_property(const u16 *property, const u16 *node) { diff --git a/lib/efi_selftest/efi_selftest_load_file.c b/lib/efi_selftest/efi_selftest_load_file.c index 4473e7c36e..bf955cbf66 100644 --- a/lib/efi_selftest/efi_selftest_load_file.c +++ b/lib/efi_selftest/efi_selftest_load_file.c @@ -166,7 +166,7 @@ struct efi_device_path *dp_lf2_file_remainder = &dp_lf2_file.f.dp; * Decompress the disk image. * * @image decompressed disk image - * @return status code + * Return: status code */ static efi_status_t decompress(u8 **image) { diff --git a/lib/efi_selftest/efi_selftest_loadimage.c b/lib/efi_selftest/efi_selftest_loadimage.c index 06a87df862..4975d80ff1 100644 --- a/lib/efi_selftest/efi_selftest_loadimage.c +++ b/lib/efi_selftest/efi_selftest_loadimage.c @@ -370,7 +370,7 @@ static efi_status_t EFIAPI flush(struct efi_file_handle *this) * Decompress the disk image. * * @image decompressed disk image - * @return status code + * Return: status code */ static efi_status_t decompress(u8 **image) { diff --git a/lib/efi_selftest/efi_selftest_miniapp_exception.c b/lib/efi_selftest/efi_selftest_miniapp_exception.c index 59b7e5100a..9be0e7e3eb 100644 --- a/lib/efi_selftest/efi_selftest_miniapp_exception.c +++ b/lib/efi_selftest/efi_selftest_miniapp_exception.c @@ -15,7 +15,7 @@ * * @handle handle of the loaded image * @systable system table - * @return status code + * Return: status code */ efi_status_t EFIAPI efi_main(efi_handle_t handle, struct efi_system_table *systable) diff --git a/lib/efi_selftest/efi_selftest_miniapp_return.c b/lib/efi_selftest/efi_selftest_miniapp_return.c index 5709e39cac..25a2bd1637 100644 --- a/lib/efi_selftest/efi_selftest_miniapp_return.c +++ b/lib/efi_selftest/efi_selftest_miniapp_return.c @@ -16,7 +16,7 @@ * * @handle handle of the loaded image * @systable system table - * @return status code + * Return: status code */ efi_status_t EFIAPI efi_main(efi_handle_t handle, struct efi_system_table *systable) diff --git a/lib/efi_selftest/efi_selftest_startimage_exit.c b/lib/efi_selftest/efi_selftest_startimage_exit.c index 11207b8162..5d4c0a6972 100644 --- a/lib/efi_selftest/efi_selftest_startimage_exit.c +++ b/lib/efi_selftest/efi_selftest_startimage_exit.c @@ -43,7 +43,7 @@ static u8 *image; * Decompress the disk image. * * @image decompressed disk image - * @return status code + * Return: status code */ static efi_status_t decompress(u8 **image) { diff --git a/lib/efi_selftest/efi_selftest_startimage_return.c b/lib/efi_selftest/efi_selftest_startimage_return.c index fabf53d983..44c23644ea 100644 --- a/lib/efi_selftest/efi_selftest_startimage_return.c +++ b/lib/efi_selftest/efi_selftest_startimage_return.c @@ -43,7 +43,7 @@ static u8 *image; * Decompress the disk image. * * @image decompressed disk image - * @return status code + * Return: status code */ static efi_status_t decompress(u8 **image) { diff --git a/lib/efi_selftest/efi_selftest_tcg2.c b/lib/efi_selftest/efi_selftest_tcg2.c index c5b0b7dd02..2eed588eea 100644 --- a/lib/efi_selftest/efi_selftest_tcg2.c +++ b/lib/efi_selftest/efi_selftest_tcg2.c @@ -401,7 +401,7 @@ static struct boot_variable boot_variable_test[] = { * efi_status_t decompress() - Decompress the disk image. * * @image decompressed disk image - * @return status code + * Return: status code */ static efi_status_t decompress(u8 **image) { @@ -438,7 +438,7 @@ static efi_status_t decompress(u8 **image) * Preexisting variable values are saved and will be restored by * calling restore_boot_variable(). * - * @return status code + * Return: status code */ static efi_status_t setup_boot_variable(void) { @@ -494,7 +494,7 @@ static efi_status_t setup_boot_variable(void) * * Restore the variable values saved in setup_boot_variable(). * - * @return status code + * Return: status code */ static efi_status_t restore_boot_variable(void) { @@ -536,7 +536,7 @@ static efi_status_t restore_boot_variable(void) * void *find_smbios_table() - Find smbios table * * @systable system table - * @return status code + * Return: status code */ static void *find_smbios_table(const struct efi_system_table *systable) { @@ -554,7 +554,7 @@ static void *find_smbios_table(const struct efi_system_table *systable) * efi_status_t setup_smbios_table() - Prepare the dummy SMBIOS table * * @systable system table - * @return status code + * Return: status code */ static efi_status_t setup_smbios_table(const struct efi_system_table *systable) { @@ -676,7 +676,7 @@ static int efi_st_tcg2_setup(const efi_handle_t img_handle, * * @tcg2 tcg2 protocol * @manufacturer_id pointer to the manufacturer_id - * @return status code + * Return: status code */ static efi_status_t get_manufacturer_id(struct efi_tcg2_protocol *tcg2, u32 *manufacturer_id) { @@ -716,7 +716,7 @@ static efi_status_t get_manufacturer_id(struct efi_tcg2_protocol *tcg2, u32 *man * * @tcg2 tcg2 protocol * @manufacturer_id pointer to the manufacturer_id - * @return status code + * Return: status code */ static efi_status_t get_manufacturer_id_buffer_small(struct efi_tcg2_protocol *tcg2) { @@ -742,7 +742,7 @@ static efi_status_t get_manufacturer_id_buffer_small(struct efi_tcg2_protocol *t * * @tcg2 tcg2 protocol * @idx pcr index to read - * @return status code + * Return: status code */ static efi_status_t read_pcr(struct efi_tcg2_protocol *tcg2, u32 idx) { @@ -779,7 +779,7 @@ static efi_status_t read_pcr(struct efi_tcg2_protocol *tcg2, u32 idx) /** * int validate_pcrs() - Compare the expected and actual pcrs * - * @return status code + * Return: status code */ static int validate_pcrs(void) { diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 280cda61a7..87aa677a4a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -656,7 +656,7 @@ int fdtdec_lookup_phandle(const void *blob, int node, const char *prop_name) * @param min_len minimum property length in bytes * @param err 0 if ok, or -FDT_ERR_NOTFOUND if the property is not found, or -FDT_ERR_BADLAYOUT if not enough data - * @return pointer to cell, which is only valid if err == 0 + * Return: pointer to cell, which is only valid if err == 0 */ static const void *get_prop_check_min_len(const void *blob, int node, const char *prop_name, int min_len, @@ -1219,7 +1219,7 @@ static int uncompress_blob(const void *src, ulong sz_src, void **dstp) /** * fdt_find_separate() - Find a devicetree at the end of the image * - * @return pointer to FDT blob + * Return: pointer to FDT blob */ static void *fdt_find_separate(void) { diff --git a/lib/of_live.c b/lib/of_live.c index 05a45ed34a..2cb0dd9c07 100644 --- a/lib/of_live.c +++ b/lib/of_live.c @@ -257,7 +257,7 @@ static void *unflatten_dt_node(const void *blob, void *mem, int *poffset, * can be used. * @blob: The blob to expand * @mynodes: The device_node tree created by the call - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int unflatten_device_tree(const void *blob, struct device_node **mynodes) diff --git a/lib/rsa/rsa-mod-exp.c b/lib/rsa/rsa-mod-exp.c index 74f9eb16cc..d259b2aedf 100644 --- a/lib/rsa/rsa-mod-exp.c +++ b/lib/rsa/rsa-mod-exp.c @@ -59,7 +59,7 @@ static void subtract_modulus(const struct rsa_public_key *key, uint32_t num[]) * * @key: Key containing modulus to check * @num: Number to check against modulus, as little endian word array - * @return 0 if num < modulus, 1 if num >= modulus + * Return: 0 if num < modulus, 1 if num >= modulus */ static int greater_equal_modulus(const struct rsa_public_key *key, uint32_t num[]) @@ -315,7 +315,7 @@ int rsa_mod_exp_sw(const uint8_t *sig, uint32_t sig_len, * * @keyptr: RSA key * @inout: Big-endian word array containing value and result - * @return 0 on successful calculation, otherwise failure error code + * Return: 0 on successful calculation, otherwise failure error code * * FIXME: Use pow_mod() instead of zynq_pow_mod() * pow_mod calculation required for zynq is bit different from diff --git a/lib/rsa/rsa-sign.c b/lib/rsa/rsa-sign.c index 3b6e5f0f86..a95a3d2748 100644 --- a/lib/rsa/rsa-sign.c +++ b/lib/rsa/rsa-sign.c @@ -38,7 +38,7 @@ static int rsa_err(const char *msg) * @keydir: Directory containins the key * @name Name of key file (will have a .crt extension) * @evpp Returns EVP_PKEY object, or NULL on failure - * @return 0 if ok, -ve on error (in which case *evpp will be set to NULL) + * Return: 0 if ok, -ve on error (in which case *evpp will be set to NULL) */ static int rsa_pem_get_pub_key(const char *keydir, const char *name, EVP_PKEY **evpp) { @@ -96,7 +96,7 @@ err_cert: * @name Name of key * @engine Engine to use * @evpp Returns EVP_PKEY object, or NULL on failure - * @return 0 if ok, -ve on error (in which case *evpp will be set to NULL) + * Return: 0 if ok, -ve on error (in which case *evpp will be set to NULL) */ static int rsa_engine_get_pub_key(const char *keydir, const char *name, ENGINE *engine, EVP_PKEY **evpp) @@ -156,7 +156,7 @@ static int rsa_engine_get_pub_key(const char *keydir, const char *name, * @name Name of key file (will have a .crt extension) * @engine Engine to use * @evpp Returns EVP_PKEY object, or NULL on failure - * @return 0 if ok, -ve on error (in which case *evpp will be set to NULL) + * Return: 0 if ok, -ve on error (in which case *evpp will be set to NULL) */ static int rsa_get_pub_key(const char *keydir, const char *name, ENGINE *engine, EVP_PKEY **evpp) @@ -172,7 +172,7 @@ static int rsa_get_pub_key(const char *keydir, const char *name, * @keydir: Directory containing the key * @name Name of key file (will have a .key extension) * @evpp Returns EVP_PKEY object, or NULL on failure - * @return 0 if ok, -ve on error (in which case *evpp will be set to NULL) + * Return: 0 if ok, -ve on error (in which case *evpp will be set to NULL) */ static int rsa_pem_get_priv_key(const char *keydir, const char *name, const char *keyfile, EVP_PKEY **evpp) @@ -215,7 +215,7 @@ static int rsa_pem_get_priv_key(const char *keydir, const char *name, * @name Name of key * @engine Engine to use * @evpp Returns EVP_PKEY object, or NULL on failure - * @return 0 if ok, -ve on error (in which case *evpp will be set to NULL) + * Return: 0 if ok, -ve on error (in which case *evpp will be set to NULL) */ static int rsa_engine_get_priv_key(const char *keydir, const char *name, const char *keyfile, @@ -283,7 +283,7 @@ static int rsa_engine_get_priv_key(const char *keydir, const char *name, * @name Name of key * @engine Engine to use for signing * @evpp Returns EVP_PKEY object, or NULL on failure - * @return 0 if ok, -ve on error (in which case *evpp will be set to NULL) + * Return: 0 if ok, -ve on error (in which case *evpp will be set to NULL) */ static int rsa_get_priv_key(const char *keydir, const char *name, const char *keyfile, ENGINE *engine, EVP_PKEY **evpp) diff --git a/lib/rsa/rsa-verify.c b/lib/rsa/rsa-verify.c index 83f7564101..fbb2d35a7d 100644 --- a/lib/rsa/rsa-verify.c +++ b/lib/rsa/rsa-verify.c @@ -47,7 +47,7 @@ * @msg: Padded message * @pad_len: Number of expected padding bytes * @algo: Checksum algo structure having information on DER encoding etc. - * @return 0 on success, != 0 on failure + * Return: 0 on success, != 0 on failure */ static int rsa_verify_padding(const uint8_t *msg, const int pad_len, struct checksum_algo *algo) @@ -122,7 +122,7 @@ static void u32_i2osp(uint32_t val, uint8_t *buf) * @seed_len: Size of the input octet string * @output: Specifies the output octet string * @output_len: Size of the output octet string - * @return 0 if the octet string was correctly generated, others on error + * Return: 0 if the octet string was correctly generated, others on error */ static int mask_generation_function1(struct checksum_algo *checksum, uint8_t *seed, int seed_len, @@ -325,7 +325,7 @@ U_BOOT_PADDING_ALGO(pss) = { * @sig_len: Number of bytes in signature * @hash: Pointer to the expected hash * @key_len: Number of bytes in rsa key - * @return 0 if verified, -ve on error + * Return: 0 if verified, -ve on error */ static int rsa_verify_key(struct image_sign_info *info, struct key_prop *prop, const uint8_t *sig, @@ -437,7 +437,7 @@ int rsa_verify_with_pkey(struct image_sign_info *info, * @sig: Signature * @sig_len: Number of bytes in signature * @node: Node having the RSA Key properties - * @return 0 if verified, -ve on error + * Return: 0 if verified, -ve on error */ static int rsa_verify_with_keynode(struct image_sign_info *info, const void *hash, uint8_t *sig, diff --git a/lib/strto.c b/lib/strto.c index 7bba1e3e54..f191884376 100644 --- a/lib/strto.c +++ b/lib/strto.c @@ -42,7 +42,7 @@ static const char *_parse_integer_fixup_radix(const char *s, uint *basep) * This ignore case * * @ch: Character to convert (expects '0'..'9', 'a'..'f' or 'A'..'F') - * @return value of digit (0..0xf) or 255 if the character is invalid + * Return: value of digit (0..0xf) or 255 if the character is invalid */ static uint decode_digit(int ch) { diff --git a/lib/tpm-utils.h b/lib/tpm-utils.h index d680d14088..a519e18235 100644 --- a/lib/tpm-utils.h +++ b/lib/tpm-utils.h @@ -31,7 +31,7 @@ * @param size size of output string * @param format format string * @param ... data points - * @return 0 on success, non-0 on error + * Return: 0 on success, non-0 on error */ int pack_byte_string(u8 *str, size_t size, const char *format, ...);

@@ -46,7 +46,7 @@ int pack_byte_string(u8 *str, size_t size, const char *format, ...); * @param size size of output string * @param format format string * @param ... data points - * @return 0 on success, non-0 on error + * Return: 0 on success, non-0 on error */ int unpack_byte_string(const u8 *str, size_t size, const char *format, ...);

@@ -54,7 +54,7 @@ int unpack_byte_string(const u8 *str, size_t size, const char *format, ...); * Get TPM command size. * * @param command byte string of TPM command - * @return command size of the TPM command + * Return: command size of the TPM command */ u32 tpm_command_size(const void *command);

@@ -62,7 +62,7 @@ u32 tpm_command_size(const void *command); * Get TPM response return code, which is one of TPM_RESULT values. * * @param response byte string of TPM response - * @return return code of the TPM response + * Return: return code of the TPM response */ u32 tpm_return_code(const void *response);

@@ -76,7 +76,7 @@ u32 tpm_return_code(const void *response); * @param size_ptr output buffer size (input parameter) and TPM * response length (output parameter); this parameter * is a bidirectional - * @return return code of the TPM response + * Return: return code of the TPM response */ u32 tpm_sendrecv_command(struct udevice *dev, const void *command, void *response, size_t *size_ptr); diff --git a/lib/zstd/bitstream.h b/lib/zstd/bitstream.h index 73aacc97f4..44abfd5eb2 100644 --- a/lib/zstd/bitstream.h +++ b/lib/zstd/bitstream.h @@ -127,7 +127,7 @@ static const unsigned BIT_mask[] = {0, 1, 3, 7, 0xF, 0x1F ****************************************************************/ /*! BIT_initCStream() : * `dstCapacity` must be > sizeof(void*) - * @return : 0 if success, + * Return: 0 if success, otherwise an error code (can be tested using ERR_isError() ) */ ZSTD_STATIC size_t BIT_initCStream(BIT_CStream_t *bitC, void *startPtr, size_t dstCapacity) { @@ -184,7 +184,7 @@ ZSTD_STATIC void BIT_flushBits(BIT_CStream_t *bitC) }

/*! BIT_closeCStream() : - * @return : size of CStream, in bytes, + * Return: size of CStream, in bytes, or 0 if it could not fit into dstBuffer */ ZSTD_STATIC size_t BIT_closeCStream(BIT_CStream_t *bitC) { @@ -259,7 +259,7 @@ ZSTD_STATIC size_t BIT_getLowerBits(size_t bitContainer, U32 const nbBits) { ret * local register is not modified. * On 32-bits, maxNbBits==24. * On 64-bits, maxNbBits==56. - * @return : value extracted + * Return: value extracted */ ZSTD_STATIC size_t BIT_lookBits(const BIT_DStream_t *bitD, U32 nbBits) { @@ -280,7 +280,7 @@ ZSTD_STATIC void BIT_skipBits(BIT_DStream_t *bitD, U32 nbBits) { bitD->bitsConsu /*! BIT_readBits() : * Read (consume) next n bits from local register and update. * Pay attention to not read more than nbBits contained into local register. - * @return : extracted value. + * Return: extracted value. */ ZSTD_STATIC size_t BIT_readBits(BIT_DStream_t *bitD, U32 nbBits) { diff --git a/lib/zstd/decompress.c b/lib/zstd/decompress.c index ae3be3f02a..edfddd817e 100644 --- a/lib/zstd/decompress.c +++ b/lib/zstd/decompress.c @@ -306,7 +306,7 @@ unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize) * compatible with legacy mode * `srcSize` must be the exact length of some number of ZSTD compressed and/or * skippable frames - * @return : decompressed size of the frames contained */ + * Return: decompressed size of the frames contained */ unsigned long long ZSTD_findDecompressedSize(const void *src, size_t srcSize) { { @@ -1497,7 +1497,7 @@ size_t ZSTD_generateNxBytes(void *dst, size_t dstCapacity, BYTE byte, size_t len * compatible with legacy mode * `src` must point to the start of a ZSTD frame, ZSTD legacy frame, or skippable frame * `srcSize` must be at least as large as the frame contained - * @return : the compressed size of the frame starting at `src` */ + * Return: the compressed size of the frame starting at `src` */ size_t ZSTD_findFrameCompressedSize(const void *src, size_t srcSize) { if (srcSize >= ZSTD_skippableHeaderSize && (ZSTD_readLE32(src) & 0xFFFFFFF0U) == ZSTD_MAGIC_SKIPPABLE_START) { @@ -1860,7 +1860,7 @@ static size_t ZSTD_refDictContent(ZSTD_DCtx *dctx, const void *dict, size_t dict

/* ZSTD_loadEntropy() : * dict : must point at beginning of a valid zstd dictionary - * @return : size of entropy tables read */ + * Return: size of entropy tables read */ static size_t ZSTD_loadEntropy(ZSTD_entropyTables_t *entropy, const void *const dict, size_t const dictSize) { const BYTE *dictPtr = (const BYTE *)dict; diff --git a/net/eth_internal.h b/net/eth_internal.h index faff0ef866..042e58a99a 100644 --- a/net/eth_internal.h +++ b/net/eth_internal.h @@ -22,7 +22,7 @@ void eth_common_init(void); * @base_name: Base name for variable, typically "eth" * @index: Index of interface being updated (>=0) * @enetaddr: Pointer to MAC address to put into the variable - * @return 0 if OK, other value on error + * Return: 0 if OK, other value on error */ int eth_env_set_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr); diff --git a/net/tftp.c b/net/tftp.c index 87392014d5..62a9648474 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -230,7 +230,7 @@ static void new_transfer(void) * @param block Block number to send * @param dst Destination buffer for data * @param len Number of bytes in block (this one and every other) - * @return number of bytes loaded + * Return: number of bytes loaded */ static int load_block(unsigned block, uchar *dst, unsigned len) { diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c index 08e2981a44..2eb2b38703 100644 --- a/scripts/dtc/libfdt/fdt_rw.c +++ b/scripts/dtc/libfdt/fdt_rw.c @@ -123,7 +123,7 @@ static int fdt_splice_string_(void *fdt, int newlen) * @s: string to find/add * @allocated: Set to 0 if the string was found, 1 if not found and so * allocated. Ignored if !fdt_chk_basic() - * @return offset of string in the string table (whether found or added) + * Return: offset of string in the string table (whether found or added) */ static int fdt_find_add_string_(void *fdt, const char *s, int *allocated) { diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h index 421f90ad93..d706f85962 100644 --- a/scripts/dtc/libfdt/libfdt.h +++ b/scripts/dtc/libfdt/libfdt.h @@ -152,7 +152,7 @@ int fdt_next_node(const void *fdt, int offset, int *depth); * * @fdt: FDT blob * @offset: Offset of node to check - * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + * Return: offset of first subnode, or -FDT_ERR_NOTFOUND if there is none */ int fdt_first_subnode(const void *fdt, int offset);

@@ -164,7 +164,7 @@ int fdt_first_subnode(const void *fdt, int offset); * * @fdt: FDT blob * @offset: Offset of previous subnode - * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * Return: offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more * subnodes */ int fdt_next_subnode(const void *fdt, int offset); diff --git a/scripts/dtc/srcpos.c b/scripts/dtc/srcpos.c index cb6ed0e3e5..c297861145 100644 --- a/scripts/dtc/srcpos.c +++ b/scripts/dtc/srcpos.c @@ -66,7 +66,7 @@ static int srcfile_depth; /* = 0 */ * @param dirname Directory to look in, or NULL for none * @param fname Filename to look for * @param fp Set to NULL if file did not open - * @return allocated filename on success (caller must free), NULL on failure + * Return: allocated filename on success (caller must free), NULL on failure */ static char *try_open(const char *dirname, const char *fname, FILE **fp) { @@ -93,7 +93,7 @@ static char *try_open(const char *dirname, const char *fname, FILE **fp) * * @param fname Filename to open * @param fp Returns pointer to opened FILE, or NULL on failure - * @return pointer to allocated filename, which caller must free + * Return: pointer to allocated filename, which caller must free */ static char *fopen_any_on_path(const char *fname, FILE **fp) { diff --git a/scripts/dtc/srcpos.h b/scripts/dtc/srcpos.h index 9ded12a383..5db32a723e 100644 --- a/scripts/dtc/srcpos.h +++ b/scripts/dtc/srcpos.h @@ -52,7 +52,7 @@ extern struct srcfile_state *current_srcfile; /* = NULL */ * @param fullnamep If non-NULL, it is set to the allocated filename of the * file that was opened. The caller is then responsible * for freeing the pointer. - * @return pointer to opened FILE + * Return: pointer to opened FILE */ FILE *srcfile_relative_open(const char *fname, char **fullnamep);

diff --git a/scripts/dtc/util.h b/scripts/dtc/util.h index 66fba8ea70..211d584435 100644 --- a/scripts/dtc/util.h +++ b/scripts/dtc/util.h @@ -81,7 +81,7 @@ extern char *join_path(const char *path, const char *name); * * @param data The string to check * @param len The string length including terminator - * @return 1 if a valid printable string, 0 if not + * Return: 1 if a valid printable string, 0 if not */ bool util_is_printable_string(const void *data, int len);

@@ -98,7 +98,7 @@ char get_escape_char(const char *s, int *i); * stderr. * * @param filename The filename to read, or - for stdin - * @return Pointer to allocated buffer containing fdt, or NULL on error + * Return: Pointer to allocated buffer containing fdt, or NULL on error */ char *utilfdt_read(const char *filename);

@@ -116,7 +116,7 @@ char *utilfdt_read_len(const char *filename, off_t *len); * * @param filename The filename to read, or - for stdin * @param buffp Returns pointer to buffer containing fdt - * @return 0 if ok, else an errno value representing the error + * Return: 0 if ok, else an errno value representing the error */ int utilfdt_read_err(const char *filename, char **buffp);

@@ -133,7 +133,7 @@ int utilfdt_read_err_len(const char *filename, char **buffp, off_t *len); * * @param filename The filename to write, or - for stdout * @param blob Poiner to buffer containing fdt - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ int utilfdt_write(const char *filename, const void *blob);

@@ -144,7 +144,7 @@ int utilfdt_write(const char *filename, const void *blob); * * @param filename The filename to write, or - for stdout * @param blob Poiner to buffer containing fdt - * @return 0 if ok, else an errno value representing the error + * Return: 0 if ok, else an errno value representing the error */ int utilfdt_write_err(const char *filename, const void *blob);

@@ -169,7 +169,7 @@ int utilfdt_write_err(const char *filename, const void *blob); * @param fmt Format string to process * @param type Returns type found(s/d/u/x), or 0 if none * @param size Returns size found(1,2,4,8) or 4 if none - * @return 0 if ok, -1 on error (no type given, or other invalid format) + * Return: 0 if ok, -1 on error (no type given, or other invalid format) */ int utilfdt_decode_type(const char *fmt, int *type, int *size);

diff --git a/test/compression.c b/test/compression.c index 26d3c80fb5..82e29c9b86 100644 --- a/test/compression.c +++ b/test/compression.c @@ -457,7 +457,7 @@ static int compress_using_none(struct unit_test_state *uts, * * @comp_type: Compression type to test * @compress: Our function to compress data - * @return 0 if OK, non-zero on failure + * Return: 0 if OK, non-zero on failure */ static int run_bootm_test(struct unit_test_state *uts, int comp_type, mutate_func compress) diff --git a/test/dm/acpi.h b/test/dm/acpi.h index 535db56b51..c6636b8824 100644 --- a/test/dm/acpi.h +++ b/test/dm/acpi.h @@ -17,7 +17,7 @@ * * @ctxp: Returns allocated context * @size: Size to allocate in bytes - * @return 0 if OK, -ENOMEM if out of memory + * Return: 0 if OK, -ENOMEM if out of memory */ int acpi_test_alloc_context_size(struct acpi_ctx **ctxp, int size);

@@ -25,7 +25,7 @@ int acpi_test_alloc_context_size(struct acpi_ctx **ctxp, int size); * acpi_test_get_length() - decode a three-byte length field * * @ptr: Length encoded as per ACPI - * @return decoded length, or -EINVAL on error + * Return: decoded length, or -EINVAL on error */ int acpi_test_get_length(u8 *ptr);

diff --git a/test/dm/core.c b/test/dm/core.c index c76dfdb165..0ce0b3c4a2 100644 --- a/test/dm/core.c +++ b/test/dm/core.c @@ -579,7 +579,7 @@ DM_TEST(dm_test_uclass, 0); * receive an incrementing value * @child: If not NULL, then the child device pointers are written into * this array. - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int create_children(struct unit_test_state *uts, struct udevice *parent, int count, int key, struct udevice *child[]) diff --git a/test/dm/of_platdata.c b/test/dm/of_platdata.c index ec41087a55..7af798b8d3 100644 --- a/test/dm/of_platdata.c +++ b/test/dm/of_platdata.c @@ -103,7 +103,7 @@ DM_TEST(dm_test_of_plat_props, UT_TESTF_SCAN_PDATA); * @uts: Test state * @parent: Parent to search * @found: bool array to update - * @return 0 if OK, non-zero on error + * Return: 0 if OK, non-zero on error */ static int find_driver_info(struct unit_test_state *uts, struct udevice *parent, bool found[]) diff --git a/test/dm/test-dm.c b/test/dm/test-dm.c index 9ba2ba23d5..f5cda81bbf 100644 --- a/test/dm/test-dm.c +++ b/test/dm/test-dm.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; * * @test_name: Name of single test to run (e.g. "dm_test_fdt_pre_reloc" or just * "fdt_pre_reloc"), or NULL to run all - * @return 0 if all tests passed, 1 if not + * Return: 0 if all tests passed, 1 if not */ static int dm_test_run(const char *test_name) { diff --git a/test/dm/video.c b/test/dm/video.c index d4a3c9c6c1..17a33cc7af 100644 --- a/test/dm/video.c +++ b/test/dm/video.c @@ -59,7 +59,7 @@ DM_TEST(dm_test_video_base, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); * * @uts: Test state * @dev: Video device - * @return compressed size of the frame buffer, or -ve on error + * Return: compressed size of the frame buffer, or -ve on error */ static int compress_frame_buffer(struct unit_test_state *uts, struct udevice *dev) @@ -120,7 +120,7 @@ static int select_vidconsole(struct unit_test_state *uts, const char *drv_name) * * @uts: Test state * @devp: Returns video device - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int video_get_nologo(struct unit_test_state *uts, struct udevice **devp) { @@ -233,7 +233,7 @@ DM_TEST(dm_test_video_ansi, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); * 2=upside down, 3=90 degree counterclockwise) * @wrap_size: Expected size of compressed frame buffer for the wrap test * @scroll_size: Same for the scroll test - * @return 0 on success + * Return: 0 on success */ static int check_vidconsole_output(struct unit_test_state *uts, int rot, int wrap_size, int scroll_size) diff --git a/test/log/syslog_test.h b/test/log/syslog_test.h index bfaa6daef8..39cce4ed49 100644 --- a/test/log/syslog_test.h +++ b/test/log/syslog_test.h @@ -49,7 +49,7 @@ int sb_log_tx_handler(struct udevice *dev, void *packet, unsigned int len); * syslog_test_setup() - Enable syslog logging ready for tests * * @uts: Test state - * @return 0 if OK, -ENOENT if the syslog log driver is not found + * Return: 0 if OK, -ENOENT if the syslog log driver is not found */ int syslog_test_setup(struct unit_test_state *uts);

@@ -57,7 +57,7 @@ int syslog_test_setup(struct unit_test_state *uts); * syslog_test_finish() - Disable syslog logging after tests * * @uts: Test state - * @return 0 if OK, -ENOENT if the syslog log driver is not found + * Return: 0 if OK, -ENOENT if the syslog log driver is not found */ int syslog_test_finish(struct unit_test_state *uts);

diff --git a/test/test-main.c b/test/test-main.c index 3cdf6849c5..8fcb02ecea 100644 --- a/test/test-main.c +++ b/test/test-main.c @@ -106,7 +106,7 @@ static int do_autoprobe(struct unit_test_state *uts) * This skips long/slow tests where there is not much value in running a flat * DT test in addition to a live DT test. * - * @return true to run the given test on the flat device tree + * Return: true to run the given test on the flat device tree */ static bool ut_test_run_on_flattree(struct unit_test *test) { @@ -130,7 +130,7 @@ static bool ut_test_run_on_flattree(struct unit_test *test) * a prefix. * @test_name: Name of current test * @select_name: Name of test to run (or NULL for all) - * @return true to run this test, false to skip it + * Return: true to run this test, false to skip it */ static bool test_matches(const char *prefix, const char *test_name, const char *select_name) @@ -171,7 +171,7 @@ static bool test_matches(const char *prefix, const char *test_name, * * @tests: List of tests to run * @count: Number of tests to ru - * @return true if any of the tests have the UT_TESTF_DM flag + * Return: true if any of the tests have the UT_TESTF_DM flag */ static bool ut_list_has_dm_tests(struct unit_test *tests, int count) { @@ -189,7 +189,7 @@ static bool ut_list_has_dm_tests(struct unit_test *tests, int count) * dm_test_restore() Put things back to normal so sandbox works as expected * * @of_root: Value to set for of_root - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int dm_test_restore(struct device_node *of_root) { @@ -212,7 +212,7 @@ static int dm_test_restore(struct device_node *of_root) * * @uts: Test state * @test: Test to prepare for - * @return 0 if OK, -EAGAIN to skip this test since some required feature is not + * Return: 0 if OK, -EAGAIN to skip this test since some required feature is not * available, other -ve on error (meaning that testing cannot likely * continue) */ @@ -253,7 +253,7 @@ static int test_pre_run(struct unit_test_state *uts, struct unit_test *test) * * @uts: Test state * @test: Test to clean up after - * @return 0 if OK, -ve on error (meaning that testing cannot likely continue) + * Return: 0 if OK, -ve on error (meaning that testing cannot likely continue) */ static int test_post_run(struct unit_test_state *uts, struct unit_test *test) { @@ -275,7 +275,7 @@ static int test_post_run(struct unit_test_state *uts, struct unit_test *test) * incremented by the number of failures (0, one hopes) * @test_name: Test to run * @name: Name of test, possibly skipping a prefix that should not be displayed - * @return 0 if all tests passed, -EAGAIN if the test should be skipped, -1 if + * Return: 0 if all tests passed, -EAGAIN if the test should be skipped, -1 if * any failed */ static int ut_run_test(struct unit_test_state *uts, struct unit_test *test, @@ -323,7 +323,7 @@ static int ut_run_test(struct unit_test_state *uts, struct unit_test *test, * incremented by the number of failures (0, one hopes) * @test: Test to run * @name: Name of test, possibly skipping a prefix that should not be displayed - * @return 0 if all tests passed, -EAGAIN if the test should be skipped, -1 if + * Return: 0 if all tests passed, -EAGAIN if the test should be skipped, -1 if * any failed */ static int ut_run_test_live_flat(struct unit_test_state *uts, @@ -371,7 +371,7 @@ static int ut_run_test_live_flat(struct unit_test_state *uts, * @count: Number of tests to run * @select_name: Name of a single test to run (from the list provided). If NULL * then all tests are run - * @return 0 if all tests passed, -ENOENT if test @select_name was not found, + * Return: 0 if all tests passed, -ENOENT if test @select_name was not found, * -EBADF if any failed */ static int ut_run_tests(struct unit_test_state *uts, const char *prefix, diff --git a/tools/fit_common.h b/tools/fit_common.h index 1e81d4c68b..0e8ee79115 100644 --- a/tools/fit_common.h +++ b/tools/fit_common.h @@ -16,7 +16,7 @@ * @ptr: image header to be verified * @image_size: size of while image * @params: mkimage parameters - * @return 0 if OK, -1 on error + * Return: 0 if OK, -1 on error */ int fit_verify_header(unsigned char *ptr, int image_size, struct image_tool_params *params); @@ -33,7 +33,7 @@ int fit_check_image_types(uint8_t type); * @sbuf: File status information is stored here * @delete_on_error: true to delete the file if we get an error * @read_only: true to open in read-only mode - * @return 0 if OK, -1 on error. + * Return: 0 if OK, -1 on error. */ int mmap_fdt(const char *cmdname, const char *fname, size_t size_inc, void **blobp, struct stat *sbuf, bool delete_on_error, diff --git a/tools/ifdtool.c b/tools/ifdtool.c index 3a39b7bc70..b70570361f 100644 --- a/tools/ifdtool.c +++ b/tools/ifdtool.c @@ -43,7 +43,7 @@ struct input_file { * * @image: Pointer to image * @size: Size of image in bytes - * @return pointer to structure, or NULL if not found + * Return: pointer to structure, or NULL if not found */ static struct fdbar_t *find_fd(char *image, int size) { @@ -72,7 +72,7 @@ static struct fdbar_t *find_fd(char *image, int size) * @frba: Flash region list * @region_type: Type of region (0..MAX_REGIONS-1) * @region: Region information is written here - * @return 0 if OK, else -ve + * Return: 0 if OK, else -ve */ static int get_region(struct frba_t *frba, int region_type, struct region_t *region) @@ -380,7 +380,7 @@ static void dump_oem(uint8_t *oem) * * @image: Pointer to image * @size: Size of image in bytes - * @return 0 if OK, -1 on error + * Return: 0 if OK, -1 on error */ static int dump_fd(char *image, int size) { @@ -432,7 +432,7 @@ static int dump_fd(char *image, int size) * * @image: Pointer to image * @size: Size of image in bytes - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int write_regions(char *image, int size) { @@ -487,7 +487,7 @@ static int perror_fname(const char *fmt, const char *fname) * @filename: Filename to use for the image * @image: Pointer to image * @size: Size of image in bytes - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ static int write_image(char *filename, char *image, int size) { @@ -595,7 +595,7 @@ static void unlock_descriptor(char *image, int size) * * @fname: Filename to open * @sizep: Returns file size in bytes - * @return 0 if OK, -1 on error + * Return: 0 if OK, -1 on error */ int open_for_read(const char *fname, int *sizep) { @@ -622,7 +622,7 @@ int open_for_read(const char *fname, int *sizep) * @size: Size of image in bytes * @region_type: Region where the file should be added * @region_fname: Filename to add to the image - * @return 0 if OK, -ve on error + * Return: 0 if OK, -ve on error */ int inject_region(char *image, int size, int region_type, char *region_fname) { @@ -701,7 +701,7 @@ int inject_region(char *image, int size, int region_type, char *region_fname) * @write_fname: Filename to add to the image * @offset_uboot_top: Offset of the top of U-Boot * @offset_uboot_start: Offset of the start of U-Boot - * @return number of bytes written if OK, -ve on error + * Return: number of bytes written if OK, -ve on error */ static int write_data(char *image, int size, unsigned int addr, const char *write_fname, int offset_uboot_top, @@ -792,7 +792,7 @@ static void print_usage(const char *name) * @str: String to split * @firstp: Returns first string * @secondp: Returns second string - * @return 0 if OK, -ve if @str does not have a : + * Return: 0 if OK, -ve if @str does not have a : */ static int get_two_words(const char *str, char **firstp, char **secondp) { diff --git a/tools/image-host.c b/tools/image-host.c index a6b0a94420..945571f584 100644 --- a/tools/image-host.c +++ b/tools/image-host.c @@ -55,7 +55,7 @@ static int fit_set_hash_value(void *fit, int noffset, uint8_t *value, * @noffset: subnode offset * @data: data to process * @size: size of data in bytes - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int fit_image_process_hash(void *fit, const char *image_name, int noffset, const void *data, size_t size) @@ -209,7 +209,7 @@ static int fit_image_setup_sig(struct image_sign_info *info, * @comment: Comment to add to signature nodes * @require_keys: Mark all keys as 'required' * @engine_id: Engine to use for signing - * @return 0 if ok, -1 on error + * Return: 0 if ok, -1 on error */ static int fit_image_process_sig(const char *keydir, const char *keyfile, void *keydest, void *fit, const char *image_name, diff --git a/tools/imagetool.h b/tools/imagetool.h index e229a34ffc..3546f7a671 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -176,7 +176,7 @@ struct image_type_params *imagetool_get_type(int type); * supported image type. If verification is successful, this prints * the respective header. * - * @return 0 on success, negative if input image format does not match with + * Return: 0 on success, negative if input image format does not match with * any of supported image types */ int imagetool_verify_print_header( @@ -195,7 +195,7 @@ int imagetool_verify_print_header( * @tparams: image type parameters * @params: mkimage parameters * - * @return 0 on success, negative if input image format does not match with + * Return: 0 on success, negative if input image format does not match with * the given image type */ int imagetool_verify_print_header_by_type( @@ -229,7 +229,7 @@ int imagetool_save_subimage( * * @params: mkimage parameters * @fname: filename to check - * @return size of file, or -ve value on error + * Return: size of file, or -ve value on error */ int imagetool_get_filesize(struct image_tool_params *params, const char *fname);

@@ -243,7 +243,7 @@ int imagetool_get_filesize(struct image_tool_params *params, const char *fname); * * @cmdname: command name * @fallback: timestamp to use if SOURCE_DATE_EPOCH isn't set - * @return timestamp based on SOURCE_DATE_EPOCH + * Return: timestamp based on SOURCE_DATE_EPOCH */ time_t imagetool_get_source_date( const char *cmdname, diff --git a/tools/rkcommon.h b/tools/rkcommon.h index 93518824a5..49b6df3185 100644 --- a/tools/rkcommon.h +++ b/tools/rkcommon.h @@ -19,7 +19,7 @@ enum { /** * rkcommon_check_params() - check params * - * @return 0 if OK, -1 if ERROR. + * Return: 0 if OK, -1 if ERROR. */ int rkcommon_check_params(struct image_tool_params *params);

@@ -56,7 +56,7 @@ void rkcommon_set_header(void *buf, struct stat *sbuf, int ifd, * * @buf: Pointer to the image file * @file_size: Size of entire bootable image file (incl. all padding) - * @return 0 if OK + * Return: 0 if OK */ int rkcommon_verify_header(unsigned char *buf, int size, struct image_tool_params *params); @@ -76,7 +76,7 @@ void rkcommon_print_header(const void *buf); * Some socs cannot disable the rc4-encryption of the spl binary. * rc4 encryption is disabled normally except on socs that cannot * handle unencrypted binaries. - * @return true or false depending on rc4 being required. + * Return: true or false depending on rc4 being required. */ bool rkcommon_need_rc4_spl(struct image_tool_params *params);

@@ -99,7 +99,7 @@ void rkcommon_rc4_encode_spl(void *buf, unsigned int offset, unsigned int size); * @tparams: Pointer tot the image type structure (for setting * the header and header_size) * - * @return 0 (always) + * Return: 0 (always) */ int rkcommon_vrec_header(struct image_tool_params *params, struct image_type_params *tparams);