From: Shinya Kuribayashi shinya.kuribayashi@necel.com
This patch has been sent on: - 6 Jun 2007
Many users of PCI config read routines tend to ignore the function ret value, and are only concerned about the contents of *val. Based on this, pci_hose_read_config_{byte,word}_via_dword should initialize the *val on dword read error.
Without this fix, for example, we'll go on scanning bus with vendor or header_type uninitialized. This brings many unnecessary config trials.
Signed-off-by: Shinya Kuribayashi shinya.kuribayashi@necel.com
---
drivers/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
Index: b/drivers/pci.c =================================================================== --- a/drivers/pci.c +++ b/drivers/pci.c @@ -81,8 +81,10 @@ int pci_hose_read_config_##size##_via_dw { \ u32 val32; \ \ - if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ + *val = -1; \ return -1; \ + } \ \ *val = (val32 >> ((offset & (int)off_mask) * 8)); \ \