Hey,
Couple of patches here that do a long-overdue sync of the Linux devicetree for PolarFire SoC & the Icicle kit with Linux. This wasn't possible for a while due to an incorrect dts & clock driver that were based on a pre-upstream version of the dt-binding. That's fixed now, so a complete re-sync is possible.
To elide complaints about the mac address not being set for the second ethernet, the code which set it for ethernet0 has been changed to set it for whichever (or both) of the macbs that are enabled.
Hopefully I'll have a follow-on bit of work soonTM that will rework the mac address setting code as it'll be needed to support another board.
Cheers, Conor.
Changes in v2: - Fix address in error print in 3/3
Conor Dooley (3): riscv: dts: drop microchip from dts filenames riscv: dts: sync mpfs-icicle devicetree with linux board: microchip: set mac address for ethernet1 on icicle
arch/riscv/dts/Makefile | 2 +- arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 136 ------ arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi | 71 +++ ...-boot.dtsi => mpfs-icicle-kit-u-boot.dtsi} | 0 arch/riscv/dts/mpfs-icicle-kit.dts | 208 +++++++++ .../dts/{microchip-mpfs.dtsi => mpfs.dtsi} | 442 ++++++++---------- board/microchip/mpfs_icicle/mpfs_icicle.c | 15 +- configs/microchip_mpfs_icicle_defconfig | 2 +- doc/board/microchip/mpfs_icicle.rst | 6 +- .../dt-bindings/clock/microchip-mpfs-clock.h | 29 +- .../microchip-mpfs-plic.h | 196 -------- .../interrupt-controller/riscv-hart.h | 17 - 12 files changed, 514 insertions(+), 610 deletions(-) delete mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit.dts create mode 100644 arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi rename arch/riscv/dts/{microchip-mpfs-icicle-kit-u-boot.dtsi => mpfs-icicle-kit-u-boot.dtsi} (100%) create mode 100644 arch/riscv/dts/mpfs-icicle-kit.dts rename arch/riscv/dts/{microchip-mpfs.dtsi => mpfs.dtsi} (57%) delete mode 100644 include/dt-bindings/interrupt-controller/microchip-mpfs-plic.h delete mode 100644 include/dt-bindings/interrupt-controller/riscv-hart.h