If MV_DEBUG_WL is defined, DEBUG_WL_S and DEBUG_WL_D macros are missing. In addition to that, get rid of debug output printing non-existent counter variable.
Signed-off-by: Phil Sutter phil@nwl.cc --- drivers/ddr/marvell/axp/ddr3_write_leveling.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ddr/marvell/axp/ddr3_write_leveling.c b/drivers/ddr/marvell/axp/ddr3_write_leveling.c index df3a3df..da384f3 100644 --- a/drivers/ddr/marvell/axp/ddr3_write_leveling.c +++ b/drivers/ddr/marvell/axp/ddr3_write_leveling.c @@ -22,6 +22,8 @@ DEBUG_WL_FULL_S(s); DEBUG_WL_FULL_D(d, l); DEBUG_WL_FULL_S("\n")
#ifdef MV_DEBUG_WL +#define DEBUG_WL_S(s) puts(s) +#define DEBUG_WL_D(d, l) printf("%x", d) #define DEBUG_RL_S(s) \ debug_cond(ddr3_get_log_level() >= MV_LOG_LEVEL_2, "%s", s) #define DEBUG_RL_D(d, l) \ @@ -1229,8 +1231,6 @@ static int ddr3_write_leveling_single_cs(u32 cs, u32 freq, int ratio_2to1, DEBUG_WL_FULL_D((u32) phase, 1); DEBUG_WL_FULL_S(", Delay = "); DEBUG_WL_FULL_D((u32) delay, 1); - DEBUG_WL_FULL_S(", Counter = "); - DEBUG_WL_FULL_D((u32) i, 1); DEBUG_WL_FULL_S("\n");
/* Drive DQS high for one cycle - All data PUPs */