This patch introduces a configurable mechanism to disable subpage writes in the DaVinci NAND driver.
Signed-off-by: Vitaly Andrianov vitalya@ti.com Signed-off-by: Murali Karicheri m-karicheri2@ti.com Acked-by: Tom Rini trini@ti.com --- README | 5 +++++ drivers/mtd/nand/davinci_nand.c | 3 +++ 2 files changed, 8 insertions(+)
diff --git a/README b/README index ff49260..faec8ef 100644 --- a/README +++ b/README @@ -4473,6 +4473,11 @@ Low Level (hardware related) configuration options: - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC: Enables the RTC32K OSC on AM33xx based plattforms
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE + Option to disable subpage write in NAND driver + driver that uses this: + drivers/mtd/nand/davinci_nand.c + Freescale QE/FMAN Firmware Support: -----------------------------------
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 5b17d7b..75b03a7 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -609,6 +609,9 @@ void davinci_nand_init(struct nand_chip *nand) #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT nand->bbt_options |= NAND_BBT_USE_FLASH; #endif +#ifdef CONFIG_SYS_NAND_NO_SUBPAGE_WRITE + nand->options |= NAND_NO_SUBPAGE_WRITE; +#endif #ifdef CONFIG_SYS_NAND_HW_ECC nand->ecc.mode = NAND_ECC_HW; nand->ecc.size = 512;