Now the driver supports also A1 phy layer.
Signed-off-by: Alexey Romanov avromanov@salutedevices.com --- drivers/usb/dwc3/dwc3-meson-g12a.c | 73 ++++++++++++++++++++++++++---- 1 file changed, 63 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index 90418ddc1d..550e6682a2 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -28,6 +28,7 @@ #include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/compat.h> +#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
/* USB2 Ports Control Registers */
@@ -102,10 +103,22 @@ enum { PHY_COUNT, };
-static const char *phy_names[PHY_COUNT] = { +static const char *const dwc3_meson_g12a_phy_names[] = { "usb2-phy0", "usb2-phy1", "usb3-phy0", };
+static const char *const dwc3_meson_a1_phy_names[] = { + "usb2-phy0", "usb2-phy1" +}; + +struct dwc3_meson_g12a; + +struct dwc3_meson_g12a_drvdata { + const char *const *phy_names; + unsigned int phy_cnt; + int (*clk_init)(struct dwc3_meson_g12a *priv); +}; + struct dwc3_meson_g12a { struct udevice *dev; struct regmap *regmap; @@ -119,6 +132,7 @@ struct dwc3_meson_g12a { #if CONFIG_IS_ENABLED(DM_REGULATOR) struct udevice *vbus_supply; #endif + struct dwc3_meson_g12a_drvdata *drvdata; };
#define U2P_REG_SIZE 0x20 @@ -293,10 +307,11 @@ int dwc3_meson_g12a_force_mode(struct udevice *dev, enum usb_dr_mode mode)
static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv) { + struct dwc3_meson_g12a_drvdata *data = priv->drvdata; int i, ret;
- for (i = 0 ; i < PHY_COUNT ; ++i) { - ret = generic_phy_get_by_name(priv->dev, phy_names[i], + for (i = 0 ; i < data->phy_cnt; ++i) { + ret = generic_phy_get_by_name(priv->dev, data->phy_names[i], &priv->phys[i]); if (ret == -ENOENT || ret == -ENODATA) continue; @@ -354,18 +369,36 @@ static int dwc3_meson_g12a_clk_init(struct dwc3_meson_g12a *priv) return 0; }
+static int dwc3_meson_a1_clk_init(struct dwc3_meson_g12a *priv) +{ + int ret; + + ret = clk_get_by_name(priv->dev, "usb_bus", &priv->clk); + if (ret) + return ret; + + ret = clk_enable(&priv->clk); + if (ret) + return ret; + + return 0; +} + static int dwc3_meson_g12a_probe(struct udevice *dev) { struct dwc3_meson_g12a *priv = dev_get_plat(dev); + struct dwc3_meson_g12a_drvdata *data = + (struct dwc3_meson_g12a_drvdata *)dev_get_driver_data(dev); int ret, i;
+ priv->drvdata = data; priv->dev = dev;
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap); if (ret) return ret;
- ret = dwc3_meson_g12a_clk_init(priv); + ret = data->clk_init(priv); if (ret) return ret;
@@ -398,7 +431,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev) if (ret) return ret;
- for (i = 0 ; i < PHY_COUNT ; ++i) { + for (i = 0 ; i < data->phy_cnt; ++i) { if (!priv->phys[i].dev) continue;
@@ -407,7 +440,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev) goto err_phy_init; }
- for (i = 0; i < PHY_COUNT; ++i) { + for (i = 0; i < data->phy_cnt; ++i) { if (!priv->phys[i].dev) continue;
@@ -419,7 +452,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev) return 0;
err_phy_init: - for (i = 0 ; i < PHY_COUNT ; ++i) { + for (i = 0 ; i < data->phy_cnt ; ++i) { if (!priv->phys[i].dev) continue;
@@ -432,20 +465,21 @@ err_phy_init: static int dwc3_meson_g12a_remove(struct udevice *dev) { struct dwc3_meson_g12a *priv = dev_get_plat(dev); + struct dwc3_meson_g12a_drvdata *data = priv->drvdata; int i;
reset_release_all(&priv->reset, 1);
clk_release_all(&priv->clk, 1);
- for (i = 0; i < PHY_COUNT; ++i) { + for (i = 0; i < data->phy_cnt; ++i) { if (!priv->phys[i].dev) continue;
generic_phy_power_off(&priv->phys[i]); }
- for (i = 0 ; i < PHY_COUNT ; ++i) { + for (i = 0 ; i < data->phy_cnt; ++i) { if (!priv->phys[i].dev) continue;
@@ -455,8 +489,27 @@ static int dwc3_meson_g12a_remove(struct udevice *dev) return dm_scan_fdt_dev(dev); }
+static const struct dwc3_meson_g12a_drvdata meson_g12a_drvdata = { + .phy_names = dwc3_meson_g12a_phy_names, + .phy_cnt = ARRAY_SIZE(dwc3_meson_g12a_phy_names), + .clk_init = dwc3_meson_g12a_clk_init, +}; + +static const struct dwc3_meson_g12a_drvdata meson_a1_drvdata = { + .phy_names = dwc3_meson_a1_phy_names, + .phy_cnt = ARRAY_SIZE(dwc3_meson_a1_phy_names), + .clk_init = dwc3_meson_a1_clk_init, +}; + static const struct udevice_id dwc3_meson_g12a_ids[] = { - { .compatible = "amlogic,meson-g12a-usb-ctrl" }, + { + .compatible = "amlogic,meson-g12a-usb-ctrl", + .data = (ulong)&meson_g12a_drvdata, + }, + { + .compatible = "amlogic,meson-a1-usb-ctrl", + .data = (ulong)&meson_a1_drvdata, + }, { } };