
On Mon, Dec 20, 2010 at 10:12 AM, Alexander Holler holler@ahsoftware.de wrote:
There must be more problems. Using gcc 4.5.1, the read*/write*-patch and your hack, my kernel doesn't boot. Using gcc 4.3.5 and the same source to compile u-boot the kernel comes up. Here is the output for the non-working u-boot:
U-Boot 2010.12-rc3-00015-g3ae9687-dirty (Dec 20 2010 - 18:01:41, gcc 4.5.1)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Beagle Rev C4 timed out in wait_for_pin: I2C_STAT=0 No EEPROM on expansion board Die ID #062a000400000000040365fa16019019 Hit any key to stop autoboot: 0 reading boot.scr
422 bytes read Running bootscript from mmc ... ## Executing script at 82000000 reading uImage
2419940 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-2.6.37-rc5-beagleboard-000 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2419876 Bytes = 2.3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Nothing else.
Regards,
Alexander
Yes, you are correct, I see the same here with 4.5.2. I noticed that bd did not have correct values of machine type and boot params:
bd address = 0x8FF24FE0 arch_number = 0xFF0084FF boot_params = 0xBB2000FE DRAM bank = 0x00000000 -> start = 0x80000000 -> size = 0x08000000 DRAM bank = 0x00000001 -> start = 0x88000000 -> size = 0x08000000 baudrate = 115200 bps TLB addr = 0x8FFF0000 relocaddr = 0x8FF85000 reloc off = 0x0FF7D000 irq_sp = 0x8FF24F68 sp start = 0x8FF24F60 FB base = 0x00000000
If we then look at board_init in beagle.c the problem is obvious:
800331ac <board_init>: 800331ac: e92d4008 push {r3, lr} 800331b0: ebff5a74 bl 80009b88 <gpmc_init> 800331b4: e3a00000 mov r0, #0 800331b8: e5983000 ldr r3, [r8] 800331bc: e5983000 ldr r3, [r8] 800331c0: e8bd8008 pop {r3, pc}
Here is with source mingled in: 800331ac <board_init>: /* * Routine: board_init * Description: Early hardware init. */ int board_init(void) { 800331ac: e92d4008 push {r3, lr} DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ 800331b0: ebff5a74 bl 80009b88 <gpmc_init> gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE; /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
return 0; } 800331b4: e3a00000 mov r0, #0 { DECLARE_GLOBAL_DATA_PTR;
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ /* board id for Linux */ gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE; 800331b8: e5983000 ldr r3, [r8] /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); 800331bc: e5983000 ldr r3, [r8]
return 0; } 800331c0: e8bd8008 pop {r3, pc}
br,
John