This fixes the MMC/SD card detect GPIOs for Apalis T30 which got broken by the following commit:
2b2b50bc8748bf1ddb2d96da7157f9eecbe24961
While at it also re-add the comments describing which particular Apalis/Colibri pins those GPIOs are on.
Signed-off-by: Marcel Ziswiler marcel@ziswiler.com --- arch/arm/dts/tegra30-apalis.dts | 9 +++++++-- arch/arm/dts/tegra30-colibri.dts | 4 +++- 2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts index 75c5d5f..13ab42b 100644 --- a/arch/arm/dts/tegra30-apalis.dts +++ b/arch/arm/dts/tegra30-apalis.dts @@ -247,13 +247,15 @@ sdhci@78000000 { status = "okay"; bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; };
sdhci@78000400 { status = "okay"; bus-width = <8>; - cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; };
sdhci@78000600 { @@ -266,12 +268,14 @@ usb@7d000000 { status = "okay"; dr_mode = "peripheral"; + /* USBO1_EN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; };
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ usb@7d004000 { status = "okay"; + /* USBH_EN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; phy_type = "utmi"; }; @@ -279,6 +283,7 @@ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ usb@7d008000 { status = "okay"; + /* USBH_EN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; };
diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index 6cd1902..36533dc 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -64,7 +64,7 @@ sdhci@78000200 { status = "okay"; bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ };
sdhci@78000600 { @@ -83,12 +83,14 @@ usb@7d004000 { status = "okay"; phy_type = "utmi"; + /* VBUS_LAN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; };
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */ usb@7d008000 { status = "okay"; + /* USBH_PEN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; }; };