If DM_I2C is used , the I2C controllers must be registered as U_BOOT_DEVICE because OF_CONTROL is not used in the SPL.
Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com ---
arch/arm/mach-omap2/am33xx/board.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index f5f2bd5..c121f27 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -19,6 +19,7 @@ #include <asm/arch/ddr_defs.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> +#include <asm/arch/i2c.h> #include <asm/arch/mem.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> @@ -93,6 +94,20 @@ U_BOOT_DEVICES(am33xx_uarts) = { # endif };
+#ifdef CONFIG_DM_I2C +static const struct omap_i2c_platdata am33xx_i2c[] = { + { I2C_BASE1, 100000, OMAP_I2C_REV_V2}, + { I2C_BASE2, 100000, OMAP_I2C_REV_V2}, + { I2C_BASE3, 100000, OMAP_I2C_REV_V2}, +}; + +U_BOOT_DEVICES(am33xx_i2c) = { + { "i2c_omap", &am33xx_i2c[0] }, + { "i2c_omap", &am33xx_i2c[1] }, + { "i2c_omap", &am33xx_i2c[2] }, +}; +#endif + #ifdef CONFIG_DM_GPIO static const struct omap_gpio_platdata am33xx_gpio[] = { { 0, AM33XX_GPIO0_BASE },