Use existing gd structure to store frequency information which can be used in drivers or arch without new request.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com ---
drivers/clk/clk_stm32mp1.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c index 359c2b9..e87307f 100644 --- a/drivers/clk/clk_stm32mp1.c +++ b/drivers/clk/clk_stm32mp1.c @@ -15,6 +15,8 @@ #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/clock/stm32mp1-clksrc.h>
+DECLARE_GLOBAL_DATA_PTR; + #ifndef CONFIG_STM32MP1_TRUSTED #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) /* activate clock tree initialization in the driver */ @@ -2042,22 +2044,22 @@ static int stm32mp1_clk_probe(struct udevice *dev) stm32mp1_clk_dump(priv); #endif
+ gd->cpu_clk = stm32mp1_clk_get(priv, _CK_MPU); + gd->bus_clk = stm32mp1_clk_get(priv, _ACLK); + /* DDRPHYC father */ + gd->mem_clk = stm32mp1_clk_get(priv, _PLL2_R); #if defined(CONFIG_DISPLAY_CPUINFO) if (gd->flags & GD_FLG_RELOC) { char buf[32];
printf("Clocks:\n"); - printf("- MPU : %s MHz\n", - strmhz(buf, stm32mp1_clk_get(priv, _CK_MPU))); + printf("- MPU : %s MHz\n", strmhz(buf, gd->cpu_clk)); printf("- MCU : %s MHz\n", strmhz(buf, stm32mp1_clk_get(priv, _CK_MCU))); - printf("- AXI : %s MHz\n", - strmhz(buf, stm32mp1_clk_get(priv, _ACLK))); + printf("- AXI : %s MHz\n", strmhz(buf, gd->bus_clk)); printf("- PER : %s MHz\n", strmhz(buf, stm32mp1_clk_get(priv, _CK_PER))); - /* DDRPHYC father */ - printf("- DDR : %s MHz\n", - strmhz(buf, stm32mp1_clk_get(priv, _PLL2_R))); + printf("- DDR : %s MHz\n", strmhz(buf, gd->mem_clk)); } #endif /* CONFIG_DISPLAY_CPUINFO */ #endif