On Wednesday 31 August 2016 12:36 AM, Andrew F. Davis wrote:
The option SPL_SPI_SUPPORT is used to enable support in SPL for loading images from SPI flash, it should not be used to determine the build type of the SPL image itself. The ability to read images from SPI flash does not imply the SPL will be booted from SPI flash.
Unconditionally build SPI flash compatible SPL images.
Acked-by: Lokesh Vutla lokeshvutla@ti.com
Thanks and regards, Lokesh
Signed-off-by: Andrew F. Davis afd@ti.com
arch/arm/cpu/armv7/am33xx/config.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk index 431cf62..87b76d9 100644 --- a/arch/arm/cpu/armv7/am33xx/config.mk +++ b/arch/arm/cpu/armv7/am33xx/config.mk @@ -31,13 +31,13 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y) # Refer to README.ti-secure for more info # ALL-y += u-boot-spl_HS_ISSW -ALL-$(CONFIG_SPL_SPI_SUPPORT) += u-boot-spl_HS_SPI_X-LOADER +ALL-y += u-boot-spl_HS_SPI_X-LOADER ALL-y += u-boot-spl_HS_X-LOADER ALL-y += u-boot-spl_HS_MLO ALL-y += u-boot-spl_HS_2ND else ALL-y += MLO -ALL-$(CONFIG_SPL_SPI_SUPPORT) += MLO.byteswap +ALL-y += MLO.byteswap endif else ifeq ($(CONFIG_TI_SECURE_DEVICE),y)