Change debug to log macro and define LOG_CATEGORY.
Remove "%s:" with __func__ as it is managed by log macro (CONFIG_LOGF_FUNC)
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com Reviewed-by: Patrice Chotard patrice.chotard@st.com ---
Changes in v2: - Solve merge conflict - Add dm/device_compat.h
drivers/pinctrl/pinctrl_stm32.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index dbea99532c..5f944d5bc5 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -3,6 +3,8 @@ * Copyright (C) 2017-2020 STMicroelectronics - All Rights Reserved */
+#define LOG_CATEGORY UCLASS_PINCTRL + #include <common.h> #include <dm.h> #include <hwspinlock.h> @@ -256,8 +258,8 @@ static int stm32_pinctrl_probe(struct udevice *dev) /* hwspinlock property is optional, just log the error */ ret = hwspinlock_get_by_index(dev, 0, &priv->hws); if (ret) - debug("%s: hwspinlock_get_by_index may have failed (%d)\n", - __func__, ret); + dev_dbg(dev, "hwspinlock_get_by_index may have failed (%d)\n", + ret);
return 0; } @@ -305,8 +307,7 @@ static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin) { gpio_dsc->port = (port_pin & 0x1F000) >> 12; gpio_dsc->pin = (port_pin & 0x0F00) >> 8; - debug("%s: GPIO:port= %d, pin= %d\n", __func__, gpio_dsc->port, - gpio_dsc->pin); + log_debug("GPIO:port= %d, pin= %d\n", gpio_dsc->port, gpio_dsc->pin);
return 0; } @@ -347,9 +348,9 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, else gpio_ctl->pupd = STM32_GPIO_PUPD_NO;
- debug("%s: gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n", - __func__, gpio_fn, gpio_ctl->speed, gpio_ctl->otype, - gpio_ctl->pupd); + log_debug("gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n", + gpio_fn, gpio_ctl->speed, gpio_ctl->otype, + gpio_ctl->pupd);
return 0; } @@ -373,7 +374,7 @@ static int stm32_pinctrl_config(ofnode node) if (rv < 0) return rv; len = rv / sizeof(pin_mux[0]); - debug("%s: no of pinmux entries= %d\n", __func__, len); + log_debug("No of pinmux entries= %d\n", len); if (len > MAX_PINS_ONE_IP) return -EINVAL; rv = ofnode_read_u32_array(subnode, "pinmux", pin_mux, len); @@ -382,7 +383,7 @@ static int stm32_pinctrl_config(ofnode node) for (i = 0; i < len; i++) { struct gpio_desc desc;
- debug("%s: pinmux = %x\n", __func__, *(pin_mux + i)); + log_debug("pinmux = %x\n", *(pin_mux + i)); prep_gpio_dsc(&gpio_dsc, *(pin_mux + i)); prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), subnode); rv = uclass_get_device_by_seq(UCLASS_GPIO, @@ -392,7 +393,7 @@ static int stm32_pinctrl_config(ofnode node) return rv; desc.offset = gpio_dsc.pin; rv = stm32_gpio_config(&desc, &gpio_ctl); - debug("%s: rv = %d\n\n", __func__, rv); + log_debug("rv = %d\n\n", rv); if (rv) return rv; } @@ -408,7 +409,7 @@ static int stm32_pinctrl_bind(struct udevice *dev) int ret;
dev_for_each_subnode(node, dev) { - debug("%s: bind %s\n", __func__, ofnode_get_name(node)); + dev_dbg(dev, "bind %s\n", ofnode_get_name(node));
ofnode_get_property(node, "gpio-controller", &ret); if (ret < 0) @@ -424,7 +425,7 @@ static int stm32_pinctrl_bind(struct udevice *dev) if (ret) return ret;
- debug("%s: bind %s\n", __func__, name); + dev_dbg(dev, "bind %s\n", name); }
return 0; @@ -448,7 +449,7 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev, if (!list) return -EINVAL;
- debug("%s: periph->name = %s\n", __func__, periph->name); + dev_dbg(dev, "periph->name = %s\n", periph->name);
size /= sizeof(*list); for (i = 0; i < size; i++) { @@ -456,7 +457,8 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev,
config_node = ofnode_get_by_phandle(phandle); if (!ofnode_valid(config_node)) { - pr_err("prop pinctrl-0 index %d invalid phandle\n", i); + dev_err(periph, + "prop pinctrl-0 index %d invalid phandle\n", i); return -EINVAL; }