changes in v3: -added all compatible devices from linux driver -fixed issues from review
changes in v2: -added usb_ether.h to change list -added 2nd patch to enable driver for arndale board
Signed-off-by: Rene Griessl rgriessl@cit-ec.uni-bielefeld.de --- drivers/usb/eth/Makefile | 1 + drivers/usb/eth/asix88179.c | 659 ++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/eth/usb_ether.c | 7 + include/usb_ether.h | 6 + 4 files changed, 673 insertions(+) create mode 100644 drivers/usb/eth/asix88179.c
diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile index e6ae9f1..c92d2b0 100644 --- a/drivers/usb/eth/Makefile +++ b/drivers/usb/eth/Makefile @@ -6,5 +6,6 @@ # new USB host ethernet layer dependencies obj-$(CONFIG_USB_HOST_ETHER) += usb_ether.o obj-$(CONFIG_USB_ETHER_ASIX) += asix.o +obj-$(CONFIG_USB_ETHER_ASIX88179) += asix88179.o obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c new file mode 100644 index 0000000..2079056 --- /dev/null +++ b/drivers/usb/eth/asix88179.c @@ -0,0 +1,659 @@ +/* + * Copyright (c) 2014 Rene Griessl rgriessl@cit-ec.uni-bielefeld.de + * based on the U-Boot Asix driver as well as information + * from the Linux AX88179_178a driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#include <common.h> +#include <usb.h> +#include <net.h> +#include <linux/mii.h> +#include "usb_ether.h" +#include <malloc.h> + + +/* ASIX AX88179 based USB 3.0 Ethernet Devices */ +#define AX88179_PHY_ID 0x03 +#define AX_EEPROM_LEN 0x100 +#define AX88179_EEPROM_MAGIC 0x17900b95 +#define AX_MCAST_FLTSIZE 8 +#define AX_MAX_MCAST 64 +#define AX_INT_PPLS_LINK (1 << 16) +#define AX_RXHDR_L4_TYPE_MASK 0x1c +#define AX_RXHDR_L4_TYPE_UDP 4 +#define AX_RXHDR_L4_TYPE_TCP 16 +#define AX_RXHDR_L3CSUM_ERR 2 +#define AX_RXHDR_L4CSUM_ERR 1 +#define AX_RXHDR_CRC_ERR (1 << 29) +#define AX_RXHDR_DROP_ERR (1 << 31) +#define AX_ACCESS_MAC 0x01 +#define AX_ACCESS_PHY 0x02 +#define AX_ACCESS_EEPROM 0x04 +#define AX_ACCESS_EFUS 0x05 +#define AX_PAUSE_WATERLVL_HIGH 0x54 +#define AX_PAUSE_WATERLVL_LOW 0x55 + +#define PHYSICAL_LINK_STATUS 0x02 + #define AX_USB_SS 0x04 + #define AX_USB_HS 0x02 + +#define GENERAL_STATUS 0x03 +/* Check AX88179 version. UA1:Bit2 = 0, UA2:Bit2 = 1 */ + #define AX_SECLD 0x04 + +#define AX_SROM_ADDR 0x07 +#define AX_SROM_CMD 0x0a + #define EEP_RD 0x04 + #define EEP_BUSY 0x10 + +#define AX_SROM_DATA_LOW 0x08 +#define AX_SROM_DATA_HIGH 0x09 + +#define AX_RX_CTL 0x0b + #define AX_RX_CTL_DROPCRCERR 0x0100 + #define AX_RX_CTL_IPE 0x0200 + #define AX_RX_CTL_START 0x0080 + #define AX_RX_CTL_AP 0x0020 + #define AX_RX_CTL_AM 0x0010 + #define AX_RX_CTL_AB 0x0008 + #define AX_RX_CTL_AMALL 0x0002 + #define AX_RX_CTL_PRO 0x0001 + #define AX_RX_CTL_STOP 0x0000 + +#define AX_NODE_ID 0x10 +#define AX_MULFLTARY 0x16 + +#define AX_MEDIUM_STATUS_MODE 0x22 + #define AX_MEDIUM_GIGAMODE 0x01 + #define AX_MEDIUM_FULL_DUPLEX 0x02 + #define AX_MEDIUM_EN_125MHZ 0x08 + #define AX_MEDIUM_RXFLOW_CTRLEN 0x10 + #define AX_MEDIUM_TXFLOW_CTRLEN 0x20 + #define AX_MEDIUM_RECEIVE_EN 0x100 + #define AX_MEDIUM_PS 0x200 + #define AX_MEDIUM_JUMBO_EN 0x8040 + +#define AX_MONITOR_MOD 0x24 + #define AX_MONITOR_MODE_RWLC 0x02 + #define AX_MONITOR_MODE_RWMP 0x04 + #define AX_MONITOR_MODE_PMEPOL 0x20 + #define AX_MONITOR_MODE_PMETYPE 0x40 + +#define AX_GPIO_CTRL 0x25 + #define AX_GPIO_CTRL_GPIO3EN 0x80 + #define AX_GPIO_CTRL_GPIO2EN 0x40 + #define AX_GPIO_CTRL_GPIO1EN 0x20 + +#define AX_PHYPWR_RSTCTL 0x26 + #define AX_PHYPWR_RSTCTL_BZ 0x0010 + #define AX_PHYPWR_RSTCTL_IPRL 0x0020 + #define AX_PHYPWR_RSTCTL_AT 0x1000 + +#define AX_RX_BULKIN_QCTRL 0x2e +#define AX_CLK_SELECT 0x33 + #define AX_CLK_SELECT_BCS 0x01 + #define AX_CLK_SELECT_ACS 0x02 + #define AX_CLK_SELECT_ULR 0x08 + +#define AX_RXCOE_CTL 0x34 + #define AX_RXCOE_IP 0x01 + #define AX_RXCOE_TCP 0x02 + #define AX_RXCOE_UDP 0x04 + #define AX_RXCOE_TCPV6 0x20 + #define AX_RXCOE_UDPV6 0x40 + +#define AX_TXCOE_CTL 0x35 + #define AX_TXCOE_IP 0x01 + #define AX_TXCOE_TCP 0x02 + #define AX_TXCOE_UDP 0x04 + #define AX_TXCOE_TCPV6 0x20 + #define AX_TXCOE_UDPV6 0x40 + +#define AX_LEDCTRL 0x73 + +#define GMII_PHY_PHYSR 0x11 + #define GMII_PHY_PHYSR_SMASK 0xc000 + #define GMII_PHY_PHYSR_GIGA 0x8000 + #define GMII_PHY_PHYSR_100 0x4000 + #define GMII_PHY_PHYSR_FULL 0x2000 + #define GMII_PHY_PHYSR_LINK 0x400 + +#define GMII_LED_ACT 0x1a + #define GMII_LED_ACTIVE_MASK 0xff8f + #define GMII_LED0_ACTIVE (1 << 4) + #define GMII_LED1_ACTIVE (1 << 5) + #define GMII_LED2_ACTIVE (1 << 6) + +#define GMII_LED_LINK 0x1c + #define GMII_LED_LINK_MASK 0xf888 + #define GMII_LED0_LINK_10 (1 << 0) + #define GMII_LED0_LINK_100 (1 << 1) + #define GMII_LED0_LINK_1000 (1 << 2) + #define GMII_LED1_LINK_10 (1 << 4) + #define GMII_LED1_LINK_100 (1 << 5) + #define GMII_LED1_LINK_1000 (1 << 6) + #define GMII_LED2_LINK_10 (1 << 8) + #define GMII_LED2_LINK_100 (1 << 9) + #define GMII_LED2_LINK_1000 (1 << 10) + #define LED0_ACTIVE (1 << 0) + #define LED0_LINK_10 (1 << 1) + #define LED0_LINK_100 (1 << 2) + #define LED0_LINK_1000 (1 << 3) + #define LED0_FD (1 << 4) + #define LED0_USB3_MASK 0x001f + #define LED1_ACTIVE (1 << 5) + #define LED1_LINK_10 (1 << 6) + #define LED1_LINK_100 (1 << 7) + #define LED1_LINK_1000 (1 << 8) + #define LED1_FD (1 << 9) + #define LED1_USB3_MASK 0x03e0 + #define LED2_ACTIVE (1 << 10) + #define LED2_LINK_1000 (1 << 13) + #define LED2_LINK_100 (1 << 12) + #define LED2_LINK_10 (1 << 11) + #define LED2_FD (1 << 14) + #define LED_VALID (1 << 15) + #define LED2_USB3_MASK 0x7c00 + +#define GMII_PHYPAGE 0x1e +#define GMII_PHY_PAGE_SELECT 0x1f + #define GMII_PHY_PGSEL_EXT 0x0007 + #define GMII_PHY_PGSEL_PAGE0 0x0000 + + +/* local defines */ +#define ASIX_BASE_NAME "axg" +#define USB_CTRL_SET_TIMEOUT 12000 +#define USB_CTRL_GET_TIMEOUT 12000 +#define USB_BULK_SEND_TIMEOUT 12000 +#define USB_BULK_RECV_TIMEOUT 12000 + +#define AX_RX_URB_SIZE 1024 * 0x12 +#define PHY_CONNECT_TIMEOUT 12000 + +#define TIMEOUT_RESOLUTION 50 /* ms */ + + +#define FLAG_NONE 0 +#define FLAG_TYPE_AX88179 (1U << 0) +#define FLAG_TYPE_AX88178a (1U << 1) +#define FLAG_TYPE_DLINK_DUB1312 (1U << 2) +#define FLAG_TYPE_SITECOM (1U << 3) +#define FLAG_TYPE_SAMSUNG (1U << 4) +#define FLAG_TYPE_LENOVO (1U << 5) + +static int asix_send(struct eth_device *eth, void *packet, int length); + + +/* local vars */ + +static const struct { + unsigned char ctrl, timer_l, timer_h, size, ifg; +} AX88179_BULKIN_SIZE[] = { + {7, 0x4f, 0, 0x12, 0xff}, + {7, 0x20, 3, 0x16, 0xff}, + {7, 0xae, 7, 0x18, 0xff}, + {7, 0xcc, 0x4c, 0x18, 8}, +}; + +static int curr_eth_dev; /* index for name of next device detected */ + +/* driver private */ +struct asix_private { + int flags; +}; + +/* + * Asix infrastructure commands + */ +static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int len; + + debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + + ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size); + + memcpy(buf, data, size); + + len = usb_control_msg( + dev->pusb_dev, + usb_sndctrlpipe(dev->pusb_dev, 0), + cmd, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_SET_TIMEOUT); + + return len == size ? 0 : -1; +} + +static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int len; + + debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", + cmd, value, index, size); + ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size); + + + len = usb_control_msg( + dev->pusb_dev, + usb_rcvctrlpipe(dev->pusb_dev, 0), + cmd, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + buf, + size, + USB_CTRL_GET_TIMEOUT); + + memcpy(data, buf, size); + + return len == size ? 0 : -1; +} + + +static int asix_read_mac(struct eth_device *eth) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN); + + if (dev->pusb_dev->descriptor.idProduct == 0x1790) { + asix_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, 6, 6, buf); + debug("asix_read_mac() returning %02x:%02x:%02x:%02x:%02x:%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + memcpy(eth->enetaddr, buf, ETH_ALEN); + } + return 0; +} + + + +static int asix_basic_reset(struct ueth_data *dev) +{ + ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 6); + u16 *tmp16; + u8 *tmp; + + tmp16 = (u16 *)buf; + tmp = (u8 *)buf; + + /* Power up ethernet PHY */ + *tmp16 = 0; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16); + + *tmp16 = AX_PHYPWR_RSTCTL_IPRL; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16); + mdelay(200); + + *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp); + mdelay(200); + + /* RX bulk configuration */ + memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5); + asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp); + + /* Water Level configuration */ + *tmp = 0x34; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp); + + *tmp = 0x52; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH, 1, 1, tmp); + + /* Enable checksum offload */ + *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP | + AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp); + + *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP | + AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp); + + /* Configure RX control register => start operation */ + *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START | + AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16); + + *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL | + AX_MONITOR_MODE_RWMP; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp); + + /* Configure default medium type => giga */ + *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN | + AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX | + AX_MEDIUM_GIGAMODE | AX_MEDIUM_JUMBO_EN; + asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16); + + u16 adv = 0; + adv = ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_LPACK | + ADVERTISE_NPAGE | ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP; + asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_ADVERTISE, 2, &adv); + + adv = ADVERTISE_1000FULL; + asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_CTRL1000, 2, &adv); + + return 0; +} + +/* + * Asix callbacks + */ +static int asix_init(struct eth_device *eth, bd_t *bd) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + int timeout = 0; + int link_detected; + + ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 6); + u16 *tmp16; + + tmp16 = (u16 *)buf; + + debug("** %s()\n", __func__); + + + /* Configure RX control register => start operation */ + *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START | + AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB; + if (asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16) < 0) + goto out_err; + + do { + asix_read_cmd(dev, AX_ACCESS_PHY, 0x03, MII_BMSR, 2, buf); + link_detected = *tmp16 & BMSR_LSTATUS; + if (!link_detected) { + if (timeout == 0) + printf("Waiting for Ethernet connection... "); + udelay(TIMEOUT_RESOLUTION * 1000); + timeout += TIMEOUT_RESOLUTION; + } + } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT); + if (link_detected) { + if (timeout != 0) + printf("done.\n"); + return 0; + } else {/*reset device and try again*/ + printf("unable to connect.\n"); + printf("Reset Ethernet Device\n"); + asix_basic_reset(dev); + timeout = 0; + do { + asix_read_cmd(dev, AX_ACCESS_PHY, 0x03, + MII_BMSR, 2, buf); + link_detected = *tmp16 & BMSR_LSTATUS; + if (!link_detected) { + if (timeout == 0) + printf("Waiting for Ethernet connection... "); + udelay(TIMEOUT_RESOLUTION * 1000); + timeout += TIMEOUT_RESOLUTION; + } + } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT); + if (link_detected) { + if (timeout != 0) + printf("done.\n"); + return 0; + } else { + printf("unable to connect.\n"); + goto out_err; + } + } + + return 0; +out_err: + return -1; +} + +static int asix_send(struct eth_device *eth, void *packet, int length) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + int err; + u32 packet_len, tx_hdr2; + int actual_len; + ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, + PKTSIZE + (2 * sizeof(packet_len))); + + debug("** %s(), len %d\n", __func__, length); + + packet_len = length; + cpu_to_le32s(&packet_len); + + memcpy(msg, &packet_len, sizeof(packet_len)); + + tx_hdr2 = 0; + if (((length + 8) % 0x200 /*frame_size*/) == 0) + tx_hdr2 |= 0x80008000; /* Enable padding */ + + cpu_to_le32s(&tx_hdr2); + + memcpy(msg + sizeof(packet_len), &tx_hdr2, sizeof(tx_hdr2)); + + memcpy(msg + sizeof(packet_len) + sizeof(tx_hdr2), + (void *)packet, length); + + err = usb_bulk_msg(dev->pusb_dev, + usb_sndbulkpipe(dev->pusb_dev, dev->ep_out), + (void *)msg, + length + sizeof(packet_len) + sizeof(tx_hdr2), + &actual_len, + USB_BULK_SEND_TIMEOUT); + debug("Tx: len = %u, actual = %u, err = %d\n", + length + sizeof(packet_len), actual_len, err); + + return err; +} + +static int asix_recv(struct eth_device *eth) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + ALLOC_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE); + u16 frame_pos; + int err; + int actual_len; + + int pkt_cnt; + u32 rx_hdr; + u16 hdr_off; + u32 *pkt_hdr; + + actual_len = -1; + + debug("** %s()\n", __func__); + + err = usb_bulk_msg(dev->pusb_dev, + usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in), + (void *)recv_buf, + AX_RX_URB_SIZE, + &actual_len, + USB_BULK_RECV_TIMEOUT); + debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE, + actual_len, err); + + if (err != 0) { + debug("Rx: failed to receive\n"); + return -1; + } + if (actual_len > AX_RX_URB_SIZE) { + debug("Rx: received too many bytes %d\n", actual_len); + return -1; + } + + + rx_hdr = *(u32 *)(recv_buf + actual_len - 4); + le32_to_cpus(&pkt_hdr); + + pkt_cnt = (u16)rx_hdr; + hdr_off = (u16)(rx_hdr >> 16); + pkt_hdr = (u32 *)(recv_buf + hdr_off); + + + frame_pos = 0; + + while (pkt_cnt--) { + u16 pkt_len; + + le32_to_cpus(pkt_hdr); + pkt_len = (*pkt_hdr >> 16) & 0x1fff; + + frame_pos += 2; + + NetReceive(recv_buf + frame_pos, pkt_len); + + pkt_hdr++; + frame_pos += ((pkt_len + 7) & 0xFFF8)-2; + + if (pkt_cnt == 0) + return 1; + } + return err; +} + +static void asix_halt(struct eth_device *eth) +{ + debug("** %s()\n", __func__); +} + +/* + * Asix probing functions + */ +void ax88179_eth_before_probe(void) +{ + curr_eth_dev = 0; +} + +struct asix_dongle { + unsigned short vendor; + unsigned short product; + int flags; +}; + +static const struct asix_dongle asix_dongles[] = { + { 0x0b95, 0x1790, FLAG_TYPE_AX88179 }, + { 0x0b95, 0x178a, FLAG_TYPE_AX88178a }, + { 0x2001, 0x4a00, FLAG_TYPE_DLINK_DUB1312 }, + { 0x0df6, 0x0072, FLAG_TYPE_SITECOM }, + { 0x04e8, 0xa100, FLAG_TYPE_SAMSUNG }, + { 0x17ef, 0x304b, FLAG_TYPE_LENOVO }, + { 0x0000, 0x0000, FLAG_NONE } /* END - Do not remove */ +}; + +/* Probe to see if a new device is actually an asix device */ +int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum, + struct ueth_data *ss) +{ + struct usb_interface *iface; + struct usb_interface_descriptor *iface_desc; + int ep_in_found = 0, ep_out_found = 0; + int i; + + /* let's examine the device now */ + iface = &dev->config.if_desc[ifnum]; + iface_desc = &dev->config.if_desc[ifnum].desc; + + for (i = 0; asix_dongles[i].vendor != 0; i++) { + if (dev->descriptor.idVendor == asix_dongles[i].vendor && + dev->descriptor.idProduct == asix_dongles[i].product) + /* Found a supported dongle */ + break; + } + + if (asix_dongles[i].vendor == 0) + return 0; + + memset(ss, 0, sizeof(struct ueth_data)); + + /* At this point, we know we've got a live one */ + debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n", + dev->descriptor.idVendor, dev->descriptor.idProduct); + + /* Initialize the ueth_data structure with some useful info */ + ss->ifnum = ifnum; + ss->pusb_dev = dev; + ss->subclass = iface_desc->bInterfaceSubClass; + ss->protocol = iface_desc->bInterfaceProtocol; + + /* alloc driver private */ + ss->dev_priv = calloc(1, sizeof(struct asix_private)); + if (!ss->dev_priv) + return 0; + + ((struct asix_private *)ss->dev_priv)->flags = asix_dongles[i].flags; + + /* + * We are expecting a minimum of 3 endpoints - in, out (bulk), and + * int. We will ignore any others. + */ + for (i = 0; i < iface_desc->bNumEndpoints; i++) { + /* is it an BULK endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { + u8 ep_addr = iface->ep_desc[i].bEndpointAddress; + if (ep_addr & USB_DIR_IN) { + if (!ep_in_found) { + ss->ep_in = ep_addr & + USB_ENDPOINT_NUMBER_MASK; + ep_in_found = 1; + } + } else { + if (!ep_out_found) { + ss->ep_out = ep_addr & + USB_ENDPOINT_NUMBER_MASK; + ep_out_found = 1; + } + } + } + + /* is it an interrupt endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { + ss->ep_int = iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + ss->irqinterval = iface->ep_desc[i].bInterval; + } + } + debug("Endpoints In %d Out %d Int %d\n", + ss->ep_in, ss->ep_out, ss->ep_int); + + /* Do some basic sanity checks, and bail if we find a problem */ + if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) || + !ss->ep_in || !ss->ep_out || !ss->ep_int) { + debug("Problems with device\n"); + return 0; + } + dev->privptr = (void *)ss; + return 1; +} + +int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss, + struct eth_device *eth) +{ + if (!eth) { + debug("%s: missing parameter.\n", __func__); + return 0; + } + sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++); + eth->init = asix_init; + eth->send = asix_send; + eth->recv = asix_recv; + eth->halt = asix_halt; + eth->priv = ss; + + if (asix_basic_reset(ss)) + return 0; + + /* Get the MAC address */ + if (asix_read_mac(eth)) + return 0; + debug("MAC %pM\n", eth->enetaddr); + + return 1; +} diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c index 1dda54c..7cb96e3 100644 --- a/drivers/usb/eth/usb_ether.c +++ b/drivers/usb/eth/usb_ether.c @@ -30,6 +30,13 @@ static const struct usb_eth_prob_dev prob_dev[] = { .get_info = asix_eth_get_info, }, #endif +#ifdef CONFIG_USB_ETHER_ASIX88179 + { + .before_probe = ax88179_eth_before_probe, + .probe = ax88179_eth_probe, + .get_info = ax88179_eth_get_info, + }, +#endif #ifdef CONFIG_USB_ETHER_MCS7830 { .before_probe = mcs7830_eth_before_probe, diff --git a/include/usb_ether.h b/include/usb_ether.h index 35700a2..b38d037 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -49,6 +49,12 @@ int asix_eth_probe(struct usb_device *dev, unsigned int ifnum, int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss, struct eth_device *eth);
+void ax88179_eth_before_probe(void); +int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum, + struct ueth_data *ss); +int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss, + struct eth_device *eth); + void mcs7830_eth_before_probe(void); int mcs7830_eth_probe(struct usb_device *dev, unsigned int ifnum, struct ueth_data *ss);