Optimized spi-flash bar writing code and also removed unnecessary bank_sel in read_ops.
Signed-off-by: Jagan Teki jteki@openedev.com Cc: Simon Glass sjg@chromium.org Cc: Michal Simek michal.simek@xilinx.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com --- drivers/mtd/spi/sf_ops.c | 41 +++++++++++++---------------------------- 1 file changed, 13 insertions(+), 28 deletions(-)
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 5cb4ef6..0f34450 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -94,15 +94,14 @@ int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc) #endif
#ifdef CONFIG_SPI_FLASH_BAR -static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) +static int spi_flash_write_bank(struct spi_flash *flash, u32 offset) { - u8 cmd; + u8 cmd, bank_sel; int ret;
- if (flash->bank_curr == bank_sel) { - debug("SF: not require to enable bank%d\n", bank_sel); - return bank_sel; - } + bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift); + if (bank_sel == flash->bank_curr) + goto bar_end;
cmd = flash->bank_write_cmd; ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1); @@ -110,25 +109,10 @@ static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) debug("SF: fail to write bank register\n"); return ret; } - flash->bank_curr = bank_sel; - - return 0; -} - -static int spi_flash_bank(struct spi_flash *flash, u32 offset) -{ - u8 bank_sel; - int ret; - - bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift); - - ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); - if (ret) { - debug("SF: fail to set bank%d\n", bank_sel); - return ret; - }
- return bank_sel; +bar_end: + flash->bank_curr = bank_sel; + return flash->bank_curr; } #endif
@@ -284,7 +268,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) spi_flash_dual_flash(flash, &erase_addr); #endif #ifdef CONFIG_SPI_FLASH_BAR - ret = spi_flash_bank(flash, erase_addr); + ret = spi_flash_write_bank(flash, erase_addr); if (ret < 0) return ret; #endif @@ -326,7 +310,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, spi_flash_dual_flash(flash, &write_addr); #endif #ifdef CONFIG_SPI_FLASH_BAR - ret = spi_flash_bank(flash, write_addr); + ret = spi_flash_write_bank(flash, write_addr); if (ret < 0) return ret; #endif @@ -416,9 +400,10 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, spi_flash_dual_flash(flash, &read_addr); #endif #ifdef CONFIG_SPI_FLASH_BAR - bank_sel = spi_flash_bank(flash, read_addr); - if (bank_sel < 0) + ret = spi_flash_write_bank(flash, read_addr); + if (ret < 0) return ret; + bank_sel = flash->bank_curr; #endif remain_len = ((SPI_FLASH_16MB_BOUN << flash->shift) * (bank_sel + 1)) - offset;