Hi Fabio
I am preparing the next and I hope to be able to send it soon. give me the instructions to follow and I will add them
Joris
On 14 Feb 2019, at 13:14, Fabio Estevam festevam@gmail.com wrote:
On Sun, Jan 20, 2019 at 7:52 PM Joris Offouga offougajoris@gmail.com wrote:
Furthermore this patch create un alias for mmc0 to usdch3 because before the convertion he was the only one described in the pico-imx7d.c.
Signed-off-by: Joris Offouga offougajoris@gmail.com
arch/arm/dts/imx7d-pico-pi.dts | 4 ++++ board/technexion/pico-imx7d/pico-imx7d.c | 36 -------------------------------- configs/pico-pi-imx7d_defconfig | 1 + 3 files changed, 5 insertions(+), 36 deletions(-)
diff --git a/arch/arm/dts/imx7d-pico-pi.dts b/arch/arm/dts/imx7d-pico-pi.dts index 66ca590..d4aca96 100644 --- a/arch/arm/dts/imx7d-pico-pi.dts +++ b/arch/arm/dts/imx7d-pico-pi.dts @@ -8,6 +8,10 @@ model = "TechNexion PICO-IMX7D Board and PI baseboard"; compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
aliases {mmc0 = &usdhc3;};leds { compatible = "gpio-leds"; pinctrl-names = "default";diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index 53e1469..48e90b0 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -28,9 +28,6 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) #define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM)
@@ -118,20 +115,6 @@ static iomux_v3_cfg_t const uart5_pads[] = { MX7D_PAD_I2C4_SDA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), };
-static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL),-};
#ifdef CONFIG_FEC_MXC static iomux_v3_cfg_t const fec1_pads[] = { MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), @@ -216,25 +199,6 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); }
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
{USDHC3_BASE_ADDR},-};
-int board_mmc_getcd(struct mmc *mmc) -{
/* Assume uSDHC3 emmc is always present */return 1;-}
-int board_mmc_init(bd_t *bis) -{
imx_iomux_v3_setup_multiple_pads(usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads));usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);-}
int board_early_init_f(void) { setup_iomux_uart(); diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig index 80f5739..0d1c56b 100644 --- a/configs/pico-pi-imx7d_defconfig +++ b/configs/pico-pi-imx7d_defconfig @@ -23,6 +23,7 @@ CONFIG_SPL_USB_HOST_SUPPORT=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_OF_CONTROL=y +CONFIG_DM_MMC=y
After converting to the other imx7d pico defconfigs you can add:
Reviewed-by: Fabio Estevam festevam@gmail.com