From the README file:

        Note:   Don't enable the "icache" and "dcache" commands
                (configuration option CFG_CMD_CACHE) unless you know
                what you (and your U-Boot users) are doing. Data
                cache cannot be enabled on systems like the 8xx or
                8260 (where accesses to the IMMR region must be
                uncached), and it cannot be disabled on all other
                systems where we (mis-) use the data cache to hold an
                initial stack and some data.

-----Original Message-----
From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of Dipen_Patel
Sent: Wednesday, August 03, 2005 8:24 AM
To: u-boot-users@lists.sourceforge.net
Cc: Lochana_Lingegowda
Subject: [U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

Dear Mailing List,

We have designed MPC8260 based custom board. I enabled I-Cache and u-boot still works. But as soon as I enabled D-Cache nothing comes up on Hyper Terminal.

Can anyone suggest regarding this problem?

Regards,

Dipen Patel

DISCLAIMER:
This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated..