On Mon, Feb 15, 2010 at 10:32 PM, Wolfgang Denk wd@denx.de wrote:
Dear Michael Zaidman,
In message 660c0f821002150322g34255468re9cf03d2ed49347f@mail.gmail.com you wrote:
Just out of interest, what exactly do you test there? Do you have any way of measuring if the LEDs work or not?
The test blinks the LEDs few times and performs running "1" ilumination. Of course only visual control is possible. The general
This is not acceptable as a POST then. Only sich tests can be used where it is possible to automatically detect the test result. Tests that require interactive handling or manual inspection as in your case do not fit into this setup.
Best regards,
Wolfgang Denk
Ok, got it. I moved the diagnostics LEDs sanity test into misc_init_f which is called even earlier than post_init_f.
Thanks, Michael