With the newly added testing of more than one device, we get:
=> ut dm pci_swapcase Test: dm_test_pci_swapcase: pci.c test/dm/pci.c:88, dm_test_pci_swapcase(): "tHIS IS A tESt" = ptr: Expected "tHIS IS A tESt", got "this is a test" Test: dm_test_pci_swapcase: pci.c (flat tree) test/dm/pci.c:88, dm_test_pci_swapcase(): "tHIS IS A tESt" = ptr: Expected "tHIS IS A tESt", got "this is a test" Failures: 2
The failure only happens on the 2nd swap_case device on the PCI bus. The case passes on the 1st device.
It turns out the swap_case driver does not emulate bit#0 in BAR registers as a read-only bit. This corrects the implementation.
Signed-off-by: Bin Meng bmeng.cn@gmail.com ---
Changes in v2: None
drivers/misc/swap_case.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/swap_case.c b/drivers/misc/swap_case.c index b777404..80ccb9f 100644 --- a/drivers/misc/swap_case.c +++ b/drivers/misc/swap_case.c @@ -142,6 +142,8 @@ static int sandbox_swap_case_write_config(struct udevice *emul, uint offset,
debug("w bar %d=%lx\n", barnum, value); *bar = value; + /* space indicator (bit#0) is read-only */ + *bar |= barinfo[barnum].type; break; } } @@ -157,11 +159,11 @@ static int sandbox_swap_case_find_bar(struct udevice *emul, unsigned int addr,
for (barnum = 0; barnum < ARRAY_SIZE(barinfo); barnum++) { unsigned int size = barinfo[barnum].size; + u32 base = plat->bar[barnum] & ~PCI_BASE_ADDRESS_SPACE;
- if (addr >= plat->bar[barnum] && - addr < plat->bar[barnum] + size) { + if (addr >= base && addr < base + size) { *barnump = barnum; - *offsetp = addr - plat->bar[barnum]; + *offsetp = addr - base; return 0; } }