Re: [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3

29 Apr 2013

Hi Stefano,
On Monday, April 29, 2013 10:41:18 PM, Benoît Thébaudeau wrote:
...
There is no change of behavior.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com
[...]
...

diff --git a/board/freescale/mx35pdk/mx35pdk.c
b/board/freescale/mx35pdk/mx35pdk.c
index 9993d7b..12e84d7 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
[...]
...
@@ -271,8 +243,7 @@ int board_late_init(void)
   	pmic_reg_read(p, REG_MODE_0, &pmic_val);
   	pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN);

mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);


mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);




imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5);


gpio_direction_output(IMX_GPIO_NR(2, 5), 1);


^
Note that GPIO2[5] seems to be used instead of GPIO1[5] above. I have not
checked if this is a bug or not. I let you check that as the board maintainer.
Best regards,
Benoît

    