On 2022/10/25 15:52, Peter Robinson wrote:
The Pinephone Pro is another device by PINE64. It's closely related to the Pinebook Pro of which this initial support is derived from.
Specification:
- A variant of the Rockchip RK3399
- A 6 inch 720*1440 DSI display
- Front and rear cameras
- Type-C interface with alt mode display (DP 1.2) and PD charging
- 4GB LPDDR4 RAM
- 128GB eMMC
- mSD card slot
- An AP6255 module for 802.11ac WiFi and Bluetooth 5
- Quectel EG25-G 4G/LTE modem
Signed-off-by: Peter Robinson pbrobinson@gmail.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 39 +++++++ arch/arm/mach-rockchip/rk3399/Kconfig | 8 ++ board/pine64/pinephone-pro-rk3399/Kconfig | 15 +++ board/pine64/pinephone-pro-rk3399/MAINTAINERS | 8 ++ board/pine64/pinephone-pro-rk3399/Makefile | 1 + .../pinephone-pro-rk3399.c | 76 +++++++++++++ configs/pinephone-pro-rk3399_defconfig | 104 ++++++++++++++++++ include/configs/pinephone-pro-rk3399.h | 19 ++++ 8 files changed, 270 insertions(+) create mode 100644 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi create mode 100644 board/pine64/pinephone-pro-rk3399/Kconfig create mode 100644 board/pine64/pinephone-pro-rk3399/MAINTAINERS create mode 100644 board/pine64/pinephone-pro-rk3399/Makefile create mode 100644 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c create mode 100644 configs/pinephone-pro-rk3399_defconfig create mode 100644 include/configs/pinephone-pro-rk3399.h
diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi new file mode 100644 index 00000000000..c9f1f4af635 --- /dev/null +++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2022 Peter Robinson <pbrobinson at gmail.com>
- */
+#include "rk3399-u-boot.dtsi" +#include "rk3399-sdram-lpddr4-100.dtsi"
+/ {
- chosen {
u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;- };
- config {
u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */- };
+};
+&i2c0 {
- u-boot,dm-pre-reloc;
+};
+&rk818 {
- u-boot,dm-pre-reloc;
+};
+&rng {
- status = "okay";
+};
+&sdhci {
- max-frequency = <25000000>;
- u-boot,dm-pre-reloc;
+};
+&sdmmc {
- max-frequency = <20000000>;
- u-boot,dm-pre-reloc;
+}; diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index b48feeb3466..d01063ac98b 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -39,6 +39,13 @@ config TARGET_PINEBOOK_PRO_RK3399 with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, 1920*1080 screen and all the usual laptop features.
+config TARGET_PINEPHONE_PRO_RK3399
- bool "PinePhone Pro"
- help
PinePhone Pro is a phone based on a variant of the Rockchiprk3399 SoC with 4Gb RAM, onboard eMMC, USB-C, headphone jack,720x1440 screen and a Quectel 4G/LTE modem.- config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)" help
@@ -165,6 +172,7 @@ endif # BOOTCOUNT_LIMIT source "board/firefly/roc-pc-rk3399/Kconfig" source "board/google/gru/Kconfig" source "board/pine64/pinebook-pro-rk3399/Kconfig" +source "board/pine64/pinephone-pro-rk3399/Kconfig" source "board/pine64/rockpro64_rk3399/Kconfig" source "board/rockchip/evb_rk3399/Kconfig" source "board/theobroma-systems/puma_rk3399/Kconfig" diff --git a/board/pine64/pinephone-pro-rk3399/Kconfig b/board/pine64/pinephone-pro-rk3399/Kconfig new file mode 100644 index 00000000000..13d6465ae6e --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/Kconfig @@ -0,0 +1,15 @@ +if TARGET_PINEPHONE_PRO_RK3399
+config SYS_BOARD
- default "pinephone-pro-rk3399"
+config SYS_VENDOR
- default "pine64"
+config SYS_CONFIG_NAME
- default "pinephone-pro-rk3399"
+config BOARD_SPECIFIC_OPTIONS
- def_bool y
+endif diff --git a/board/pine64/pinephone-pro-rk3399/MAINTAINERS b/board/pine64/pinephone-pro-rk3399/MAINTAINERS new file mode 100644 index 00000000000..c923ff1be32 --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/MAINTAINERS @@ -0,0 +1,8 @@ +PINEPHONE_PRO +M: Peter Robinson pbrobinson@gmail.com +S: Maintained +F: board/pine64/rk3399-pinephone-pro/ +F: include/configs/rk3399-pinephone-pro.h +F: arch/arm/dts/rk3399-pinephone-pro.dts +F: arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi +F: configs/pinephone-pro-rk3399_defconfig diff --git a/board/pine64/pinephone-pro-rk3399/Makefile b/board/pine64/pinephone-pro-rk3399/Makefile new file mode 100644 index 00000000000..8d9203053e5 --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/Makefile @@ -0,0 +1 @@ +obj-y += pinephone-pro-rk3399.o diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c new file mode 100644 index 00000000000..eb639cd0d07 --- /dev/null +++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- (C) Copyright 2016 Rockchip Electronics Co., Ltd
- (C) Copyright 2022 Peter Robinson <pbrobinson at gmail.com>
- */
+#include <common.h> +#include <dm.h> +#include <init.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/grf_rk3399.h> +#include <asm/arch-rockchip/hardware.h> +#include <asm/arch-rockchip/misc.h> +#include <power/regulator.h>
+#define GRF_IO_VSEL_BT565_SHIFT 0 +#define PMUGRF_CON0_VSEL_SHIFT 8
+#ifndef CONFIG_SPL_BUILD +int board_early_init_f(void) +{
- struct udevice *regulator;
- int ret;
- ret = regulator_get_by_platname("vcc5v0_usb", ®ulator);
- if (ret) {
pr_debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret);goto out;- }
- ret = regulator_set_enable(regulator, true);
- if (ret)
pr_debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret);+out:
- return 0;
+} +#endif
+#ifdef CONFIG_MISC_INIT_R +static void setup_iodomain(void) +{
- struct rk3399_grf_regs *grf =
syscon_get_first_range(ROCKCHIP_SYSCON_GRF);- struct rk3399_pmugrf_regs *pmugrf =
syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);- /* BT565 is in 1.8v domain */
- rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
- /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
- rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
+}
+int misc_init_r(void) +{
- const u32 cpuid_offset = 0x7;
- const u32 cpuid_length = 0x10;
- u8 cpuid[cpuid_length];
- int ret;
- setup_iodomain();
- ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
- if (ret)
return ret;- ret = rockchip_cpuid_set(cpuid, cpuid_length);
- if (ret)
return ret;- return ret;
+} +#endif diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig new file mode 100644 index 00000000000..0082d3aec39 --- /dev/null +++ b/configs/pinephone-pro-rk3399_defconfig @@ -0,0 +1,104 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x8000 +CONFIG_ENV_OFFSET=0x3F8000 +CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro" +CONFIG_ROCKCHIP_RK3399=y +CONFIG_TARGET_PINEPHONE_PRO_RK3399=y +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0x800800 +CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 +CONFIG_BOOTDELAY=3 +CONFIG_USE_PREBOOT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb" +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_SPI_LOAD=y +CONFIG_TPL=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_DM_KEYBOARD=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_EFUSE=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_TYPEC=y +CONFIG_DM_PMIC_FAN53555=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM_RK3399_LPDDR4=y +CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS=2 +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_KEYBOARD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_EDP=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y diff --git a/include/configs/pinephone-pro-rk3399.h b/include/configs/pinephone-pro-rk3399.h new file mode 100644 index 00000000000..78017d6bcc3 --- /dev/null +++ b/include/configs/pinephone-pro-rk3399.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright (C) 2016 Rockchip Electronics Co., Ltd
- Copyright (C) 2022 Peter Robinson <pbrobinson at gmail.com>
- */
+#ifndef __PINEPHONE_PRO_RK3399_H +#define __PINEPHONE_PRO_RK3399_H
+#define ROCKCHIP_DEVICE_SETTINGS \
"stdin=serial,usbkbd\0" \"stdout=serial,vidconsole\0" \"stderr=serial,vidconsole\0"+#include <configs/rk3399_common.h>
+#define SDRAM_BANK_SIZE (2UL << 30)
+#endif