To resolve DCNANO underrun issue, change the DDR Port 0 arbitration from round robin fashion to fixed priority level 1, while other ports are not assigned any priority, so they will be serviced in round robin fashion if there is no active request from Port 0.
Signed-off-by: Ye Li ye.li@nxp.com Acked-by: Peng Fan peng.fan@nxp.com --- board/freescale/imx8ulp_evk/lpddr4_timing.c | 4 ++-- board/freescale/imx8ulp_evk/lpddr4_timing_266.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/freescale/imx8ulp_evk/lpddr4_timing.c b/board/freescale/imx8ulp_evk/lpddr4_timing.c index 1878ca5..e9edb87 100644 --- a/board/freescale/imx8ulp_evk/lpddr4_timing.c +++ b/board/freescale/imx8ulp_evk/lpddr4_timing.c @@ -198,8 +198,8 @@ struct dram_cfg_param ddr_ctl_cfg[] = { { 0x2e0604c8, 0x8000f00 }, /* 306 */ { 0x2e0604cc, 0xa08 }, /* 307 */ { 0x2e0604d0, 0x1010101 }, /* 308 */ - { 0x2e0604d4, 0x102 }, /* 309 */ - { 0x2e0604d8, 0x404 }, /* 310 */ + { 0x2e0604d4, 0x01000102 }, /* 309 */ + { 0x2e0604d8, 0x00000101 }, /* 310 */ { 0x2e0604dc, 0x40400 }, /* 311 */ { 0x2e0604e0, 0x4040000 }, /* 312 */ { 0x2e0604e4, 0x4000000 }, /* 313 */ diff --git a/board/freescale/imx8ulp_evk/lpddr4_timing_266.c b/board/freescale/imx8ulp_evk/lpddr4_timing_266.c index e48cb96..9728a25 100644 --- a/board/freescale/imx8ulp_evk/lpddr4_timing_266.c +++ b/board/freescale/imx8ulp_evk/lpddr4_timing_266.c @@ -197,8 +197,8 @@ struct dram_cfg_param ddr_ctl_cfg[] = { { 0x2e0604c8, 0x8000f00 }, /* 306 */ { 0x2e0604cc, 0xa08 }, /* 307 */ { 0x2e0604d0, 0x1010101 }, /* 308 */ - { 0x2e0604d4, 0x102 }, /* 309 */ - { 0x2e0604d8, 0x404 }, /* 310 */ + { 0x2e0604d4, 0x01000102 }, /* 309 */ + { 0x2e0604d8, 0x00000101 }, /* 310 */ { 0x2e0604dc, 0x40400 }, /* 311 */ { 0x2e0604e0, 0x4040000 }, /* 312 */ { 0x2e0604e4, 0x4000000 }, /* 313 */