The HPE SoC is new to linux. A basic device tree layout with minimum required for linux to boot including a timer and watchdog support has been created.
The dts file is empty at this point but will be updated in subsequent updates as board specific features are enabled.
Signed-off-by: Nick Hawkins nick.hawkins@hpe.com
arch/arm/dts/Makefile | 2 + arch/arm/dts/hpe-bmc-dl360gen10.dts | 26 ++++++++ arch/arm/dts/hpe-gxp.dtsi | 95 +++++++++++++++++++++++++++++ 3 files changed, 123 insertions(+) create mode 100644 arch/arm/dts/hpe-bmc-dl360gen10.dts create mode 100644 arch/arm/dts/hpe-gxp.dtsi
The dts files need to be in linux-next (or similar) upstream before we start taking them in to Linux, and then re-synced periodically.
Hi Tom,
When you say taking them into Linux do you mean these files for U-Boot would go into Torvalds Linux? Ideally we would like to have the one from Torvalds Linux come into U-boot. Our DTS files are currently here at Linux-next:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arc...
Thank you for all the feedback you have provided on this and the other patches. I will start working on them.
-Nick