-----Original Message----- From: Michal Simek [mailto:michal.simek@xilinx.com] Sent: Montag, 26. Oktober 2015 14:52 To: Jagan Teki jteki@openedev.com; Hoefle Marco Marco.Hoefle@nanotronic.ch; Michal Simek michal.simek@xilinx.com Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] u-boot device model SPI + SPI Flash
On 10/23/2015 12:20 PM, Jagan Teki wrote:
On 23 October 2015 at 15:42, Hoefle Marco Marco.Hoefle@nanotronic.ch
wrote:
Maybe somebody has a valid u-boot dts file for a microblaze system with
an SPI core? That would helpful.
We want to move from a parallel nor flash to a SPI flash for FPGA config,
u-boot, Linux Kernel and rootfs.
The last missing part is u-boot. The kernel dts file is ok and the mtd
partitions are set up correctly.
I even grepped on linux/arch/microblaze couldn't get much info, So added Michal he well aware of this may be he can help.
http://www.xilinx.com/support/download/index.html/content/xilinx/en/do wnloadNav/embedded-design-tools/2015-2.html
ac701 bsp and I expect also Kc705.
I downloaded the AC701 bsp file but it is not a valid archive. Do I need to use (and learn how to use) the 3 GB pertalinux tools to build u-boot for Microblaze? The u-boot config for the AC701 and the dts file would probably sufficient.
Thanks, Michal