Dear "Wolfgang Denk",
I Think i am debugging on u-boot.Because i am upgrading u-boot from v1.1.2 to v2010.12-rc3. I have tried to run u-boot on skyeye 1.2.5 ,and that works fine. Two version of U-boot are base on the same hardwares: CPU: S3c44b0 FLash: SST30vf3201 (4MByte) Net Adapter: RTL8019 SDRAM: H57V2562GTR (32MByte) U-boot v1.1.2 is old ,and it also works fine on this hardware environment.
Best Regrads MrGates ----- Original Message ----- From: "Wolfgang Denk" wd@denx.de To: "MrGates" 120368262@qq.com Cc: u-boot@lists.denx.de Sent: Wednesday, January 12, 2011 4:14 PM Subject: Re: [U-Boot] "b reset" does not work in u-boot_v2010.12-rc3 with eldk4.2
Dear "MrGates",
In message 745589936D574232BE24EA063064B5B6@MrGates you wrote:
[ lots of unrelated quote deleted]
Please restrict your quoting to the relevant parts; see http://www.netmeister.org/news/learn2quote.html
I use SkyEye 1.2.5 cooperates with arm-linux-gdb . Now the serial still no output information. I thought the u-boot has failed before relocation. I do not know where maybe wrong. I have checked configs/xxx.h ,start.S many times.
Are you sure you are really debugging a problem with U-Boot? Maybe there is some problem with SkyEye and/or how you configured it?
Best regards,
Wolfgang Denk