On Thu, May 4, 2017 at 12:11 PM, Jagan Teki jagan@openedev.com wrote:
From: Jagan Teki jagan@amarulasolutions.com
Add initial devicetree support for i.MX6 Quad Sabresd board.
The configs item are copied from configs/mx6sabresd_spl_defconfig and added
- CONFIG_OF_CONTROL=y
- CONFIG_DM_GPIO=y
- CONFIG_DM_MMC=y
- CONFIG_BLK is not set
- CONFIG_DM_MMC_OPS is not set
- CONFIG_PINCTRL=y
- CONFIG_PINCTRL_IMX6=y
Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
board/freescale/mx6sabresd/MAINTAINERS | 1 + board/freescale/mx6sabresd/mx6sabresd.c | 132 ++++++++++++++++++++++---------- configs/imx6qdl_sabresd_spl_defconfig | 62 +++++++++++++++ include/configs/mx6sabresd.h | 4 + 4 files changed, 159 insertions(+), 40 deletions(-) create mode 100644 configs/imx6qdl_sabresd_spl_defconfig
diff --git a/board/freescale/mx6sabresd/MAINTAINERS b/board/freescale/mx6sabresd/MAINTAINERS index add2314..ccb939d 100644 --- a/board/freescale/mx6sabresd/MAINTAINERS +++ b/board/freescale/mx6sabresd/MAINTAINERS @@ -6,3 +6,4 @@ F: include/configs/mx6sabresd.h F: configs/mx6dlsabresd_defconfig F: configs/mx6qsabresd_defconfig F: configs/mx6sabresd_spl_defconfig +F: configs/imx6qdl_sabresd_spl_defconfig
mx6qdl_sabresd_spl_defconfig is not a good name:
- We do not support mx6dl currently - We support mx6qp
Just use the existing mx6sabresd_spl_defconfig.