
9 Jul
2019
9 Jul
'19
3:33 a.m.
On 7/9/19 2:49 AM, Marek Vasut wrote:
The fdt_pci_dma_ranges() cannot work on e.g. ARM, since the DT entries endianness is not adjusted at all. Fix this.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Tom Rini trini@konsulko.com
+CC Simon
common/fdt_support.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c index f31e9b0cc5..e0043e8da6 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -671,30 +671,33 @@ int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose) {
dma_range[0] = 0; if (size >= 0x100000000ull)
dma_range[0] |= FDT_PCI_MEM64;
elsedma_range[0] |= cpu_to_fdt32(FDT_PCI_MEM64);
dma_range[0] |= FDT_PCI_MEM32;
if (hose->regions[r].flags & PCI_REGION_PREFETCH)dma_range[0] |= cpu_to_fdt32(FDT_PCI_MEM32);
dma_range[0] |= FDT_PCI_PREFETCH;
dma_range[0] |= cpu_to_fdt32(FDT_PCI_PREFETCH);
#ifdef CONFIG_SYS_PCI_64BIT
dma_range[1] = bus_start >> 32;
dma_range[1] = cpu_to_fdt32(bus_start >> 32);
#else dma_range[1] = 0; #endif
dma_range[2] = bus_start & 0xffffffff;
dma_range[2] = cpu_to_fdt32(bus_start & 0xffffffff);
if (addrcell == 2) {
dma_range[3] = phys_start >> 32;
dma_range[4] = phys_start & 0xffffffff;
dma_range[3] = cpu_to_fdt32(phys_start >> 32);
} else {dma_range[4] = cpu_to_fdt32(phys_start & 0xffffffff);
dma_range[3] = phys_start & 0xffffffff;
dma_range[3] = cpu_to_fdt32(phys_start & 0xffffffff);
}
if (sizecell == 2) {
dma_range[3 + addrcell + 0] = size >> 32;
dma_range[3 + addrcell + 1] = size & 0xffffffff;
dma_range[3 + addrcell + 0] =
cpu_to_fdt32(size >> 32);
dma_range[3 + addrcell + 1] =
} else {cpu_to_fdt32(size & 0xffffffff);
dma_range[3 + addrcell + 0] = size & 0xffffffff;
dma_range[3 + addrcell + 0] =
cpu_to_fdt32(size & 0xffffffff);
}
dma_range += (3 + addrcell + sizecell);
--
Best regards,
Marek Vasut