Dear York Sun,
In message 1363973369-26110-17-git-send-email-yorksun@freescale.com you wrote:
From: Suresh Gupta suresh.gupta@freescale.com
- Added SERDES2 PRTCLs = 0x98, 0x9E
- Default Phy Addresses for Teranetics PHY on XAUI card The PHY addresses of Teranetics PHY on XAUI riser card are assigned based on the slot it is in. Switches SW4[2:4] and SW6[2:4] on AMC2PEX-2S On B4860QDS, AMC2PEX card decide the PHY addresses on slot1 and slot2
- Configure MDIO for 10Gig Mac
Signed-off-by: Suresh Gupta suresh.gupta@freescale.com
board/freescale/b4860qds/eth_b4860qds.c | 38 +++++++++++++++++++++++++++++++ drivers/net/fm/b4860.c | 4 +++- include/configs/B4860QDS.h | 6 ++++- 3 files changed, 46 insertions(+), 2 deletions(-)
WARNING: quoted string split across lines #134: FILE: board/freescale/b4860qds/eth_b4860qds.c:281: + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S" + "for FM1_10GEC1: %x\n",
CHECK: Alignment should match open parenthesis #137: FILE: board/freescale/b4860qds/eth_b4860qds.c:284: + fm_info_set_phy_address(FM1_10GEC1, + CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
WARNING: quoted string split across lines #139: FILE: board/freescale/b4860qds/eth_b4860qds.c:286: + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S" + "for FM1_10GEC2: %x\n",
CHECK: Alignment should match open parenthesis #142: FILE: board/freescale/b4860qds/eth_b4860qds.c:289: + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
WARNING: quoted string split across lines #147: FILE: board/freescale/b4860qds/eth_b4860qds.c:294: + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S" + "for FM1_10GEC2: %x\n",
CHECK: Alignment should match open parenthesis #150: FILE: board/freescale/b4860qds/eth_b4860qds.c:297: + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
CHECK: Alignment should match open parenthesis #165: FILE: board/freescale/b4860qds/eth_b4860qds.c:330: + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
CHECK: Alignment should match open parenthesis #169: FILE: board/freescale/b4860qds/eth_b4860qds.c:334: + printf("Fman1: 10GSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i));
CHECK: Logical continuations should be on the previous line #190: FILE: drivers/net/fm/b4860.c:60: if ((port == FM1_10GEC1 || port == FM1_10GEC2) + && ((is_serdes_configured(XAUI_FM1_MAC9))
CHECK: Logical continuations should be on the previous line #191: FILE: drivers/net/fm/b4860.c:61: + && ((is_serdes_configured(XAUI_FM1_MAC9)) + || (is_serdes_configured(XAUI_FM1_MAC10))))
Best regards,
Wolfgang Denk