27 Jan
2014
27 Jan
'14
5:49 p.m.
On 01/23/2014 11:53 PM, Jim Lin wrote:
On Fri, 2014-01-24 at 08:43 +0800, Stephen Warren wrote:
From: Jim Lin jilin@nvidia.com
Fix the timeout issue after running "bootp" command in U-Boot console.
TXFIFOTHRES bits of TXFILLTUNING register should be set to 0x10 after a controller reset and before RUN bit is se, (per technical reference manual.
Stephen, Could you help to replace "," with "t" and put right parenthesis? Like
controller reset and before RUN bit is set (per technical reference manual).
Tom, will you do this when applying the patch, or do you want me to resend? Thanks.