The TS433 seems to use a silergy,syr827 regulator for the cpu supply. At least that is the compatible used in the vendor devicetree, though it could very well also be another fan53555 clone.
Define the needed regulator node and hook up the cpu-supply to the cpu cores.
Tested-by: Uwe Kleine-König ukleinek@debian.org Signed-off-by: Heiko Stuebner heiko@sntech.de Link: https://lore.kernel.org/r/20240723195538.1133436-12-heiko@sntech.de
[ upstream commit: 99b36ba910d896bddbb9a190ca686c6d9cd0325f ]
(cherry picked from commit 2f0afd1a3cbf6f3192dc7a5c496affab718671b3) Reviewed-by: Kever Yang kever.yang@rock-chips.com --- .../src/arm64/rockchip/rk3568-qnap-ts433.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+)
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts index 9f964b6f411..4bccefc0537 100644 --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -130,6 +130,16 @@ vin-supply = <&vcc5v0_usb>; };
+ vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + vcc5v0_usb: regulator-vcc5v0-usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; @@ -156,6 +166,22 @@ status = "okay"; };
+&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; @@ -175,12 +201,27 @@ };
&i2c0 { + status = "okay"; + pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + }; };
&i2c1 {