On 2023/4/22 09:23, Jonas Karlman wrote:
Use the same prop as linux to control the use of fifo or dma mode. Also add a u-boot,spl-sfc-no-dma prop to control the same in SPL.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
drivers/spi/rockchip_sfc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/rockchip_sfc.c b/drivers/spi/rockchip_sfc.c index 851a6482985b..1c26802c618e 100644 --- a/drivers/spi/rockchip_sfc.c +++ b/drivers/spi/rockchip_sfc.c @@ -227,10 +227,12 @@ static int rockchip_sfc_ofdata_to_platdata(struct udevice *bus) struct rockchip_sfc *sfc = dev_get_plat(bus);
sfc->regbase = dev_read_addr_ptr(bus);
- if (ofnode_read_bool(dev_ofnode(bus), "sfc-no-dma"))
sfc->use_dma = false;- else
sfc->use_dma = true;
- sfc->use_dma = !dev_read_bool(bus, "rockchip,sfc-no-dma");
+#ifdef CONFIG_SPL_BUILD
- if (sfc->use_dma)
sfc->use_dma = !dev_read_bool(bus, "u-boot,spl-sfc-no-dma");+#endif
#if CONFIG_IS_ENABLED(CLK) int ret;