Re: [U-Boot] [PATCH 08/21] imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ

On 11/08/2016 08:02, Peng Fan wrote:

Since MX6ULL select MX6UL, we can not use IS_ENABLED(CONFIG_MX6UL) here, because this piece code is only for i.MX6UL.

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de

---

arch/arm/cpu/armv7/mx6/soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index af7fca5..4083ba5 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -356,7 +356,7 @@ int arch_cpu_init(void) set_ahb_rate(132000000); }

• if (IS_ENABLED(CONFIG_MX6UL) && is_soc_rev(CHIP_REV_1_0) == 0) {

• if (is_mx6ul() && is_soc_rev(CHIP_REV_1_0) == 0) { /*
  • According to the design team's requirement on i.MX6UL,
  • the PMIC_STBY_REQ PAD should be configured as open

Reviewed-by: Stefano Babic sbabic@denx.de

Best regards, Stefano Babic