[U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API

All in-tree boards that use this controller have CONFIG_NET_MULTI added Also: - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111 - cleaned up line lengths - modified all boards that override weak function in this driver - modified all eeprom standalone apps to work with new driver

Signed-off-by: Ben Warren biggerbadderben@gmail.com --- board/altera/ep1c20/ep1c20.c | 12 + board/altera/ep1s10/ep1s10.c | 12 + board/altera/ep1s40/ep1s40.c | 12 + board/armltd/integrator/integrator.c | 13 +- board/armltd/versatile/versatile.c | 12 + board/bf533-ezkit/bf533-ezkit.c | 12 + board/bf533-stamp/bf533-stamp.c | 12 + board/bf538f-ezkit/bf538f-ezkit.c | 12 + board/bf561-ezkit/bf561-ezkit.c | 12 + board/blackstamp/blackstamp.c | 12 + board/cerf250/cerf250.c | 12 + board/cm-bf533/cm-bf533.c | 12 + board/cm-bf561/cm-bf561.c | 12 + board/cradle/cradle.c | 12 + board/delta/delta.c | 12 + board/dnp1110/dnp1110.c | 12 + board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c | 12 + board/gaisler/gr_ep2s60/gr_ep2s60.c | 12 + board/innokom/innokom.c | 12 + board/logodl/logodl.c | 12 + board/lpd7a40x/lpd7a40x.c | 12 + board/ms7722se/ms7722se.c | 12 + board/netstar/eeprom.c | 57 ++-- board/netstar/netstar.c | 12 + board/psyent/pk1c20/pk1c20.c | 12 + board/pxa255_idp/pxa_idp.c | 12 + board/renesas/MigoR/migo_r.c | 12 + board/st/nhk8815/nhk8815.c | 12 + board/voiceblue/eeprom.c | 57 ++-- board/voiceblue/voiceblue.c | 12 + board/xaeniax/xaeniax.c | 12 + board/xm250/xm250.c | 12 + board/xsengine/xsengine.c | 12 + board/zylonite/zylonite.c | 12 + drivers/net/Makefile | 2 +- drivers/net/smc91111.c | 491 ++++++++++++------------- drivers/net/smc91111.h | 192 +++++----- examples/standalone/smc91111_eeprom.c | 98 +++--- include/configs/EP1C20.h | 3 +- include/configs/EP1S10.h | 3 +- include/configs/EP1S40.h | 3 +- include/configs/MigoR.h | 3 +- include/configs/PK1C20.h | 3 +- include/configs/bf533-ezkit.h | 3 +- include/configs/bf533-stamp.h | 3 +- include/configs/bf538f-ezkit.h | 3 +- include/configs/bf561-ezkit.h | 3 +- include/configs/blackstamp.h | 3 +- include/configs/cerf250.h | 3 +- include/configs/cm-bf533.h | 3 +- include/configs/cm-bf561.h | 3 +- include/configs/cradle.h | 3 +- include/configs/dnp1110.h | 3 +- include/configs/gr_cpci_ax2000.h | 3 +- include/configs/gr_ep2s60.h | 3 +- include/configs/innokom.h | 3 +- include/configs/integratorcp.h | 3 +- include/configs/logodl.h | 3 +- include/configs/lpd7a400-10.h | 3 +- include/configs/lpd7a404-10.h | 3 +- include/configs/ms7722se.h | 3 +- include/configs/netstar.h | 3 +- include/configs/nhk8815.h | 3 +- include/configs/pxa255_idp.h | 3 +- include/configs/versatile.h | 3 +- include/configs/voiceblue.h | 3 +- include/configs/xaeniax.h | 3 +- include/configs/xm250.h | 3 +- include/configs/xsengine.h | 3 +- include/configs/zylonite.h | 2 +- include/netdev.h | 1 + 71 files changed, 888 insertions(+), 490 deletions(-)

diff --git a/board/altera/ep1c20/ep1c20.c b/board/altera/ep1c20/ep1c20.c index c5bfb85..82900f7 100644 --- a/board/altera/ep1c20/ep1c20.c +++ b/board/altera/ep1c20/ep1c20.c @@ -22,6 +22,7 @@ */

#include <common.h> +#include <netdev.h>

int board_early_init_f (void) { @@ -38,3 +39,14 @@ phys_size_t initdram (int board_type) { return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/altera/ep1s10/ep1s10.c b/board/altera/ep1s10/ep1s10.c index de9bf42..cf886da 100644 --- a/board/altera/ep1s10/ep1s10.c +++ b/board/altera/ep1s10/ep1s10.c @@ -22,6 +22,7 @@ */

#include <common.h> +#include <netdev.h>

int board_early_init_f (void) { @@ -38,3 +39,14 @@ phys_size_t initdram (int board_type) { return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/altera/ep1s40/ep1s40.c b/board/altera/ep1s40/ep1s40.c index c0eca17..6395de7 100644 --- a/board/altera/ep1s40/ep1s40.c +++ b/board/altera/ep1s40/ep1s40.c @@ -22,6 +22,7 @@ */

#include <common.h> +#include <netdev.h>

int checkboard (void) { @@ -33,3 +34,14 @@ phys_size_t initdram (int board_type) { return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index a46deea..518944e 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -34,9 +34,7 @@ */

#include <common.h> -#ifdef CONFIG_PCI #include <netdev.h> -#endif

DECLARE_GLOBAL_DATA_PTR;

@@ -127,9 +125,16 @@ extern void dram_query(void); return 0; }

-#ifdef CONFIG_PCI +#ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { - return pci_eth_init(bis); + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif +#ifdef CONFIG_PCI + rc += pci_eth_init(bis); +#endif + return rc; } #endif diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c index 197bc89..6e836dd 100644 --- a/board/armltd/versatile/versatile.c +++ b/board/armltd/versatile/versatile.c @@ -34,6 +34,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -89,3 +90,14 @@ int dram_init (void) { return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c index d5f0b7c..ff0e15e 100644 --- a/board/bf533-ezkit/bf533-ezkit.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h> #include "psd4256.h" #include "flash-defines.h"

@@ -57,3 +58,14 @@ int misc_init_r(void)

return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 7108dda..32e7174 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/io.h> #include "bf533-stamp.h"

@@ -283,3 +284,14 @@ void __led_toggle(led_id_t mask) }

#endif + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/bf538f-ezkit/bf538f-ezkit.c b/board/bf538f-ezkit/bf538f-ezkit.c index bbee989..1897405 100644 --- a/board/bf538f-ezkit/bf538f-ezkit.c +++ b/board/bf538f-ezkit/bf538f-ezkit.c @@ -7,6 +7,7 @@ */

#include <common.h> +#include <netdev.h> #include <config.h> #include <asm/blackfin.h>

@@ -25,3 +26,14 @@ phys_size_t initdram(int board_type) gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; return gd->bd->bi_memsize; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c index 5aede17..24347e2 100644 --- a/board/bf561-ezkit/bf561-ezkit.c +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/io.h>

DECLARE_GLOBAL_DATA_PTR; @@ -43,3 +44,14 @@ phys_size_t initdram(int board_type) gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; return gd->bd->bi_memsize; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/blackstamp/blackstamp.c b/board/blackstamp/blackstamp.c index b671899..524c86c 100644 --- a/board/blackstamp/blackstamp.c +++ b/board/blackstamp/blackstamp.c @@ -12,6 +12,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/io.h>

DECLARE_GLOBAL_DATA_PTR; @@ -44,3 +45,14 @@ void swap_to(int device_id) SSYNC(); } #endif + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c index 307894f..59346bc 100644 --- a/board/cerf250/cerf250.c +++ b/board/cerf250/cerf250.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -71,3 +72,14 @@ int dram_init (void)

return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/cm-bf533/cm-bf533.c b/board/cm-bf533/cm-bf533.c index 7eb761d..6598e27 100644 --- a/board/cm-bf533/cm-bf533.c +++ b/board/cm-bf533/cm-bf533.c @@ -7,6 +7,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -23,3 +24,14 @@ phys_size_t initdram(int board_type) gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; return gd->bd->bi_memsize; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/cm-bf561/cm-bf561.c b/board/cm-bf561/cm-bf561.c index 5bce9eb..b204d7c 100644 --- a/board/cm-bf561/cm-bf561.c +++ b/board/cm-bf561/cm-bf561.c @@ -7,6 +7,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -23,3 +24,14 @@ phys_size_t initdram(int board_type) gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; return gd->bd->bi_memsize; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c index 6d8d555..21eb655 100644 --- a/board/cradle/cradle.c +++ b/board/cradle/cradle.c @@ -27,6 +27,7 @@

#include <asm/arch/pxa-regs.h> #include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -223,3 +224,14 @@ dram_init (void) PHYS_SDRAM_3_SIZE + PHYS_SDRAM_4_SIZE ); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/delta/delta.c b/board/delta/delta.c index 84ff47e..a294213 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -22,6 +22,7 @@ */

#include <common.h> +#include <netdev.h> #include <i2c.h> #include <da9030.h> #include <malloc.h> @@ -363,3 +364,14 @@ void hw_watchdog_reset(void) i2c_reg_write(addr, SYS_CONTROL_A, val); } #endif + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/dnp1110/dnp1110.c b/board/dnp1110/dnp1110.c index ab8e7be..c215f5f 100644 --- a/board/dnp1110/dnp1110.c +++ b/board/dnp1110/dnp1110.c @@ -23,6 +23,7 @@ */

#include <common.h> +#include <netdev.h> #include <SA-1100.h>

DECLARE_GLOBAL_DATA_PTR; @@ -53,3 +54,14 @@ int dram_init (void)

return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c b/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c index 105a747..7fe85b8 100644 --- a/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c +++ b/board/gaisler/gr_cpci_ax2000/gr_cpci_ax2000.c @@ -19,6 +19,7 @@ */

#include <common.h> +#include <netdev.h> #include <config.h> #include <asm/leon.h>

@@ -37,3 +38,14 @@ int misc_init_r(void) { return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/gaisler/gr_ep2s60/gr_ep2s60.c b/board/gaisler/gr_ep2s60/gr_ep2s60.c index 2904d32..7241c6d 100644 --- a/board/gaisler/gr_ep2s60/gr_ep2s60.c +++ b/board/gaisler/gr_ep2s60/gr_ep2s60.c @@ -19,6 +19,7 @@ */

#include <common.h> +#include <netdev.h> #include <config.h> #include <asm/leon.h>

@@ -37,3 +38,14 @@ int misc_init_r(void) { return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c index c2b88ae..3412f10 100644 --- a/board/innokom/innokom.c +++ b/board/innokom/innokom.c @@ -24,6 +24,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/arch/pxa-regs.h> #include <asm/mach-types.h>

@@ -182,3 +183,14 @@ void show_boot_progress (int status)

return; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c index c57210a..2562ecc 100644 --- a/board/logodl/logodl.c +++ b/board/logodl/logodl.c @@ -23,6 +23,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/arch/pxa-regs.h>

DECLARE_GLOBAL_DATA_PTR; @@ -120,3 +121,14 @@ void show_boot_progress (int status)

return; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c index 7edb65e..437dad0 100644 --- a/board/lpd7a40x/lpd7a40x.c +++ b/board/lpd7a40x/lpd7a40x.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h> #if defined(CONFIG_LH7A400) #include <lh7a400.h> #elif defined(CONFIG_LH7A404) @@ -79,3 +80,14 @@ int dram_init (void)

return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/ms7722se/ms7722se.c b/board/ms7722se/ms7722se.c index 32234d3..4e40b17 100644 --- a/board/ms7722se/ms7722se.c +++ b/board/ms7722se/ms7722se.c @@ -24,6 +24,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/io.h> #include <asm/processor.h>

@@ -57,3 +58,14 @@ void led_set_state(unsigned short value) { writew(value & 0xFF, LED_BASE); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c index 5806128..1366457 100644 --- a/board/netstar/eeprom.c +++ b/board/netstar/eeprom.c @@ -27,43 +27,42 @@ #include <common.h> #include <exports.h> #include <timestamp.h> +#include <net.h> #include "../drivers/net/smc91111.h"

-#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE - -static u16 read_eeprom_reg(u16 reg) +static u16 read_eeprom_reg(struct eth_device *dev, u16 reg) { int timeout;

- SMC_SELECT_BANK(2); - SMC_outw(reg, PTR_REG); + SMC_SELECT_BANK(dev, 2); + SMC_outw(dev, reg, PTR_REG);

- SMC_SELECT_BANK(1); - SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD, + SMC_SELECT_BANK(dev, 1); + SMC_outw(dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD, CTL_REG); timeout = 100; - while((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout) + while((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout) udelay(100); if (timeout == 0) { printf("Timeout Reading EEPROM register %02x\n", reg); return 0; }

- return SMC_inw (GP_REG); + return SMC_inw (dev, GP_REG); }

-static int write_eeprom_reg(u16 value, u16 reg) +static int write_eeprom_reg(struct eth_device *dev, u16 value, u16 reg) { int timeout;

- SMC_SELECT_BANK(2); - SMC_outw(reg, PTR_REG); + SMC_SELECT_BANK(dev, 2); + SMC_outw(dev, reg, PTR_REG);

- SMC_SELECT_BANK(1); - SMC_outw(value, GP_REG); - SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG); + SMC_SELECT_BANK(dev, 1); + SMC_outw(dev, value, GP_REG); + SMC_outw(dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG); timeout = 100; - while ((SMC_inw(CTL_REG) & CTL_STORE) && --timeout) + while ((SMC_inw(dev, CTL_REG) & CTL_STORE) && --timeout) udelay (100); if (timeout == 0) { printf("Timeout Writing EEPROM register %02x\n", reg); @@ -73,17 +72,17 @@ static int write_eeprom_reg(u16 value, u16 reg) return 1; }

-static int write_data(u16 *buf, int len) +static int write_data(struct eth_device *dev, u16 *buf, int len) { u16 reg = 0x23;

while (len--) - write_eeprom_reg(*buf++, reg++); + write_eeprom_reg(dev, *buf++, reg++);

return 0; }

-static int verify_macaddr(char *s) +static int verify_macaddr(struct eth_device *dev, char *s) { u16 reg; int i, err = 0; @@ -91,7 +90,7 @@ static int verify_macaddr(char *s) printf("MAC Address: "); err = i = 0; for (i = 0; i < 3; i++) { - reg = read_eeprom_reg(0x20 + i); + reg = read_eeprom_reg(dev, 0x20 + i); printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n'); if (s) err |= reg != ((u16 *)s)[i]; @@ -100,7 +99,7 @@ static int verify_macaddr(char *s) return err ? 0 : 1; }

-static int set_mac(char *s) +static int set_mac(struct eth_device *dev, char *s) { int i; char *e, eaddr[6]; @@ -112,7 +111,7 @@ static int set_mac(char *s) }

for (i = 0; i < 3; i++) - write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i); + write_eeprom_reg(dev, *(((u16 *)eaddr) + i), 0x20 + i);

return 0; } @@ -150,6 +149,10 @@ int eeprom(int argc, char *argv[]) int i, len, ret; unsigned char buf[58], *p;

+ struct eth_device dev = { + .iobase = CONFIG_SMC91111_BASE + }; + app_startup(argv); if (get_version() != XF_VERSION) { printf("Wrong XF_VERSION.\n"); @@ -160,14 +163,14 @@ int eeprom(int argc, char *argv[])

return crcek();

- if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) { + if ((SMC_inw (&dev, BANK_SELECT) & 0xFF00) != 0x3300) { printf("SMSC91111 not found.\n"); return 2; }

/* Called without parameters - print MAC address */ if (argc < 2) { - verify_macaddr(NULL); + verify_macaddr(&dev, NULL); return 0; }

@@ -201,8 +204,8 @@ int eeprom(int argc, char *argv[]) }

/* First argument (MAC) is mandatory */ - set_mac(argv[1]); - if (verify_macaddr(argv[1])) { + set_mac(&dev, argv[1]); + if (verify_macaddr(&dev, argv[1])) { printf("*** MAC address does not match! ***\n"); return 4; } @@ -210,7 +213,7 @@ int eeprom(int argc, char *argv[]) while (len--) *p++ = 0;

- write_data((u16 *)buf, sizeof(buf) >> 1); + write_data(&dev, (u16 *)buf, sizeof(buf) >> 1);

return 0; } diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c index ffd60bf..df1704b 100644 --- a/board/netstar/netstar.c +++ b/board/netstar/netstar.c @@ -21,6 +21,7 @@ */

#include <common.h> +#include <netdev.h> #include <i2c.h> #include <flash.h> #include <nand.h> @@ -115,3 +116,14 @@ int board_nand_init(struct nand_chip *nand) return 0; } #endif + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/psyent/pk1c20/pk1c20.c b/board/psyent/pk1c20/pk1c20.c index 95b48bc..0a24866 100644 --- a/board/psyent/pk1c20/pk1c20.c +++ b/board/psyent/pk1c20/pk1c20.c @@ -22,6 +22,7 @@ */

#include <common.h> +#include <netdev.h>

int board_early_init_f (void) { @@ -38,3 +39,14 @@ phys_size_t initdram (int board_type) { return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index e9e479c..05e30ec 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -31,6 +31,7 @@ */

#include <common.h> +#include <netdev.h> #include <command.h>

DECLARE_GLOBAL_DATA_PTR; @@ -133,3 +134,14 @@ U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, );

#endif + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/renesas/MigoR/migo_r.c b/board/renesas/MigoR/migo_r.c index 204ca78..c0f26ac 100644 --- a/board/renesas/MigoR/migo_r.c +++ b/board/renesas/MigoR/migo_r.c @@ -24,6 +24,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/io.h> #include <asm/processor.h>

@@ -51,3 +52,14 @@ int dram_init (void) void led_set_state (unsigned short value) { } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/st/nhk8815/nhk8815.c b/board/st/nhk8815/nhk8815.c index 085a5e0..c5b8c19 100644 --- a/board/st/nhk8815/nhk8815.c +++ b/board/st/nhk8815/nhk8815.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h> #include <asm/io.h>

DECLARE_GLOBAL_DATA_PTR; @@ -77,3 +78,14 @@ int dram_init(void) gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c index f01597a..2ae46d1 100644 --- a/board/voiceblue/eeprom.c +++ b/board/voiceblue/eeprom.c @@ -27,43 +27,42 @@ #include <common.h> #include <exports.h> #include <timestamp.h> +#include <net.h> #include "../drivers/net/smc91111.h"

-#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE - -static u16 read_eeprom_reg(u16 reg) +static u16 read_eeprom_reg(struct eth_device *dev, u16 reg) { int timeout;

- SMC_SELECT_BANK(2); - SMC_outw(reg, PTR_REG); + SMC_SELECT_BANK(dev, 2); + SMC_outw(dev, reg, PTR_REG);

- SMC_SELECT_BANK(1); - SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD, + SMC_SELECT_BANK(dev, 1); + SMC_outw(dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD, CTL_REG); timeout = 100; - while((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout) + while((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout) udelay(100); if (timeout == 0) { printf("Timeout Reading EEPROM register %02x\n", reg); return 0; }

- return SMC_inw (GP_REG); + return SMC_inw (dev, GP_REG); }

-static int write_eeprom_reg(u16 value, u16 reg) +static int write_eeprom_reg(struct eth_device *dev, u16 value, u16 reg) { int timeout;

- SMC_SELECT_BANK(2); - SMC_outw(reg, PTR_REG); + SMC_SELECT_BANK(dev, 2); + SMC_outw(dev, reg, PTR_REG);

- SMC_SELECT_BANK(1); - SMC_outw(value, GP_REG); - SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG); + SMC_SELECT_BANK(dev, 1); + SMC_outw(dev, value, GP_REG); + SMC_outw(dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG); timeout = 100; - while ((SMC_inw(CTL_REG) & CTL_STORE) && --timeout) + while ((SMC_inw(dev, CTL_REG) & CTL_STORE) && --timeout) udelay (100); if (timeout == 0) { printf("Timeout Writing EEPROM register %02x\n", reg); @@ -73,17 +72,17 @@ static int write_eeprom_reg(u16 value, u16 reg) return 1; }

-static int write_data(u16 *buf, int len) +static int write_data(struct eth_device *dev, u16 *buf, int len) { u16 reg = 0x23;

while (len--) - write_eeprom_reg(*buf++, reg++); + write_eeprom_reg(dev, *buf++, reg++);

return 0; }

-static int verify_macaddr(char *s) +static int verify_macaddr(struct eth_device *dev, char *s) { u16 reg; int i, err = 0; @@ -91,7 +90,7 @@ static int verify_macaddr(char *s) printf("MAC Address: "); err = i = 0; for (i = 0; i < 3; i++) { - reg = read_eeprom_reg(0x20 + i); + reg = read_eeprom_reg(dev, 0x20 + i); printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n'); if (s) err |= reg != ((u16 *)s)[i]; @@ -100,7 +99,7 @@ static int verify_macaddr(char *s) return err ? 0 : 1; }

-static int set_mac(char *s) +static int set_mac(struct eth_device *dev, char *s) { int i; char *e, eaddr[6]; @@ -112,7 +111,7 @@ static int set_mac(char *s) }

for (i = 0; i < 3; i++) - write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i); + write_eeprom_reg(dev, *(((u16 *)eaddr) + i), 0x20 + i);

return 0; } @@ -148,6 +147,10 @@ int eeprom(int argc, char *argv[]) int i, len, ret; unsigned char buf[58], *p;

+ struct eth_device dev = { + .iobase = CONFIG_SMC91111_BASE + }; + app_startup(argv); if (get_version() != XF_VERSION) { printf("Wrong XF_VERSION.\n"); @@ -156,14 +159,14 @@ int eeprom(int argc, char *argv[]) return 1; }

- if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) { + if ((SMC_inw (&dev, BANK_SELECT) & 0xFF00) != 0x3300) { printf("SMSC91111 not found.\n"); return 2; }

/* Called without parameters - print MAC address */ if (argc < 2) { - verify_macaddr(NULL); + verify_macaddr(&dev, NULL); return 0; }

@@ -197,8 +200,8 @@ int eeprom(int argc, char *argv[]) }

/* First argument (MAC) is mandatory */ - set_mac(argv[1]); - if (verify_macaddr(argv[1])) { + set_mac(&dev, argv[1]); + if (verify_macaddr(&dev, argv[1])) { printf("*** MAC address does not match! ***\n"); return 4; } @@ -206,7 +209,7 @@ int eeprom(int argc, char *argv[]) while (len--) *p++ = 0;

- write_data((u16 *)buf, sizeof(buf) >> 1); + write_data(&dev, (u16 *)buf, sizeof(buf) >> 1);

return 0; } diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c index 59b3310..5f8af2b 100644 --- a/board/voiceblue/voiceblue.c +++ b/board/voiceblue/voiceblue.c @@ -20,6 +20,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -66,3 +67,14 @@ int board_late_init(void)

return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c index 9baa457..4c19c4d 100644 --- a/board/xaeniax/xaeniax.c +++ b/board/xaeniax/xaeniax.c @@ -29,6 +29,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -71,3 +72,14 @@ int dram_init (void)

return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/xm250/xm250.c b/board/xm250/xm250.c index 56b1cd4..246bdde 100644 --- a/board/xm250/xm250.c +++ b/board/xm250/xm250.c @@ -27,6 +27,7 @@

#include <asm/arch/pxa-regs.h> #include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -80,3 +81,14 @@ dram_init (void)

return (0); } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/xsengine/xsengine.c b/board/xsengine/xsengine.c index 65923e9..4464fd4 100644 --- a/board/xsengine/xsengine.c +++ b/board/xsengine/xsengine.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -61,3 +62,14 @@ int dram_init (void)

return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/board/zylonite/zylonite.c b/board/zylonite/zylonite.c index 5829170..749a40f 100644 --- a/board/zylonite/zylonite.c +++ b/board/zylonite/zylonite.c @@ -26,6 +26,7 @@ */

#include <common.h> +#include <netdev.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -68,3 +69,14 @@ int dram_init (void)

return 0; } + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC91111 + rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + return rc; +} +#endif diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 34b56d8..2df075c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -63,7 +63,7 @@ COBJS-$(CONFIG_RTL8139) += rtl8139.o COBJS-$(CONFIG_RTL8169) += rtl8169.o COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o COBJS-$(CONFIG_SH_ETHER) += sh_eth.o -COBJS-$(CONFIG_DRIVER_SMC91111) += smc91111.o +COBJS-$(CONFIG_SMC91111) += smc91111.o COBJS-$(CONFIG_SMC911X) += smc911x.o COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c index b41e4d2..5974c4d 100644 --- a/drivers/net/smc91111.c +++ b/drivers/net/smc91111.c @@ -62,6 +62,7 @@ #include <common.h> #include <command.h> #include <config.h> +#include <malloc.h> #include "smc91111.h" #include <net.h>

@@ -128,11 +129,10 @@ static const char version[] = #define LAN91C111_MEMORY_MULTIPLIER (1024*2)

#ifndef CONFIG_SMC91111_BASE -#define CONFIG_SMC91111_BASE 0x20000300 +#error "SMC91111 Base address must be passed to initialization funciton" +/* #define CONFIG_SMC91111_BASE 0x20000300 */ #endif

-#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE - #define SMC_DEV_NAME "SMC91111" #define SMC_PHY_ADDR 0x0000 #define SMC_ALLOC_MAX_TRY 5 @@ -153,65 +153,26 @@ static const char version[] = . .------------------------------------------------------------------ */

-extern int eth_init(bd_t *bd); -extern void eth_halt(void); -extern int eth_rx(void); -extern int eth_send(volatile void *packet, int length); - #ifdef SHARED_RESOURCES extern void swap_to(int device_id); #endif

/* - . This is called by register_netdev(). It is responsible for - . checking the portlist for the SMC9000 series chipset. If it finds - . one, then it will initialize the device, find the hardware information, - . and sets up the appropriate device parameters. - . NOTE: Interrupts are *OFF* when this procedure is called. - . - . NB:This shouldn't be static since it is referred to externally. -*/ -int smc_init(void); - -/* . This is called by unregister_netdev(). It is responsible for . cleaning up before the driver is finally unregistered and discarded. */ void smc_destructor(void);

-/* - . The kernel calls this function when someone wants to use the device, - . typically 'ifconfig ethX up'. -*/ -static int smc_open(bd_t *bd); - - -/* - . This is called by the kernel in response to 'ifconfig ethX down'. It - . is responsible for cleaning up everything that the open routine - . does, and maybe putting the card into a powerdown state. -*/ -static int smc_close(void); - -/* - . Configures the PHY through the MII Management interface -*/ #ifndef CONFIG_SMC91111_EXT_PHY -static void smc_phy_configure(void); +static void smc_phy_configure(struct eth_device *dev); #endif /* !CONFIG_SMC91111_EXT_PHY */

-/* - . This is a separate procedure to handle the receipt of a packet, to - . leave the interrupt code looking slightly cleaner -*/ -static int smc_rcv(void); - -/* See if a MAC address is defined in the current environment. If so use it. If not - . print a warning and set the environment and other globals with the default. - . If an EEPROM is present it really should be consulted. -*/ -int smc_get_ethaddr(bd_t *bd); -int get_rom_mac(uchar *v_rom_mac); +/* See if a MAC address is defined in the current environment. If so use it. + * If not, print a warning and set the environment and other globals with the + * default. If an EEPROM is present it really should be consulted. + */ +static int smc_get_ethaddr(struct eth_device *dev); +static int get_rom_mac(struct eth_device *dev, uchar *v_rom_mac);

/* ------------------------------------------------------------ @@ -233,65 +194,63 @@ int get_rom_mac(uchar *v_rom_mac); * packets being corrupt (shifted) on the wire, etc. Switching to the * inx,outx functions fixed this problem. */ -static inline word SMC_inw(dword offset); -static inline void SMC_outw(word value, dword offset); -static inline byte SMC_inb(dword offset); -static inline void SMC_outb(byte value, dword offset); -static inline void SMC_insw(dword offset, volatile uchar* buf, dword len); -static inline void SMC_outsw(dword offset, uchar* buf, dword len);

#define barrier() __asm__ __volatile__("": : :"memory")

-static inline word SMC_inw(dword offset) +static inline word SMC_inw(struct eth_device *dev, dword offset) { word v; - v = *((volatile word*)(SMC_BASE_ADDRESS+offset)); + v = *((volatile word*)(dev->iobase + offset)); barrier(); *(volatile u32*)(0xc0000000); return v; }

-static inline void SMC_outw(word value, dword offset) +static inline void SMC_outw(struct eth_device *dev, word value, dword offset) { - *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value; + *((volatile word*)(dev->iobase + offset)) = value; barrier(); *(volatile u32*)(0xc0000000); }

-static inline byte SMC_inb(dword offset) +static inline byte SMC_inb(struct eth_device *dev, dword offset) { word _w;

- _w = SMC_inw(offset & ~((dword)1)); + _w = SMC_inw(dev, offset & ~((dword)1)); return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w); }

-static inline void SMC_outb(byte value, dword offset) +static inline void SMC_outb(struct eth_device *dev, byte value, dword offset) { word _w;

- _w = SMC_inw(offset & ~((dword)1)); + _w = SMC_inw(dev, offset & ~((dword)1)); if (offset & 1) - *((volatile word*)(SMC_BASE_ADDRESS+(offset & ~((dword)1)))) = (value<<8) | (_w & 0x00ff); + *((volatile word*)(dev->iobase + (offset & ~((dword)1)))) = + (value<<8) | (_w & 0x00ff); else - *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value | (_w & 0xff00); + *((volatile word*)(dev->iobase + offset)) = + value | (_w & 0xff00); }

-static inline void SMC_insw(dword offset, volatile uchar* buf, dword len) +static inline void SMC_insw(struct eth_device *dev, dword offset, + volatile uchar* buf, dword len) { volatile word *p = (volatile word *)buf;

while (len-- > 0) { - *p++ = SMC_inw(offset); + *p++ = SMC_inw(dev, offset); barrier(); *((volatile u32*)(0xc0000000)); } }

-static inline void SMC_outsw(dword offset, uchar* buf, dword len) +static inline void SMC_outsw(struct eth_device *dev, dword offset, + uchar* buf, dword len) { volatile word *p = (volatile word *)buf;

while (len-- > 0) { - SMC_outw(*p++, offset); + SMC_outw(dev, *p++, offset); barrier(); *(volatile u32*)(0xc0000000); } @@ -339,18 +298,18 @@ void smc_get_macaddr( byte *addr ) { /*********************************************** * Show available memory * ***********************************************/ -void dump_memory_info(void) +void dump_memory_info(struct eth_device *dev) { word mem_info; word old_bank;

- old_bank = SMC_inw(BANK_SELECT)&0xF; + old_bank = SMC_inw(dev, BANK_SELECT)&0xF;

- SMC_SELECT_BANK(0); - mem_info = SMC_inw( MIR_REG ); + SMC_SELECT_BANK(dev, 0); + mem_info = SMC_inw( dev, MIR_REG ); PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048);

- SMC_SELECT_BANK(old_bank); + SMC_SELECT_BANK(dev, old_bank); } /* . A rather simple routine to print out a packet for debugging purposes. @@ -361,35 +320,15 @@ static void print_packet( byte *, int );

#define tx_done(dev) 1

- -/* this does a soft reset on the device */ -static void smc_reset( void ); - -/* Enable Interrupts, Receive, and Transmit */ -static void smc_enable( void ); - -/* this puts the device in an inactive state */ -static void smc_shutdown( void ); - -/* Routines to Read and Write the PHY Registers across the - MII Management Interface -*/ - -#ifndef CONFIG_SMC91111_EXT_PHY -static word smc_read_phy_register(byte phyreg); -static void smc_write_phy_register(byte phyreg, word phydata); -#endif /* !CONFIG_SMC91111_EXT_PHY */ - - -static int poll4int (byte mask, int timeout) +static int poll4int (struct eth_device *dev, byte mask, int timeout) { int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ; int is_timeout = 0; - word old_bank = SMC_inw (BSR_REG); + word old_bank = SMC_inw (dev, BSR_REG);

PRINTK2 ("Polling...\n"); - SMC_SELECT_BANK (2); - while ((SMC_inw (SMC91111_INT_REG) & mask) == 0) { + SMC_SELECT_BANK (dev, 2); + while ((SMC_inw (dev, SMC91111_INT_REG) & mask) == 0) { if (get_timer (0) >= tmo) { is_timeout = 1; break; @@ -397,7 +336,7 @@ static int poll4int (byte mask, int timeout) }

/* restore old bank selection */ - SMC_SELECT_BANK (old_bank); + SMC_SELECT_BANK (dev, old_bank);

if (is_timeout) return 1; @@ -406,12 +345,12 @@ static int poll4int (byte mask, int timeout) }

/* Only one release command at a time, please */ -static inline void smc_wait_mmu_release_complete (void) +static inline void smc_wait_mmu_release_complete (struct eth_device *dev) { int count = 0;

/* assume bank 2 selected */ - while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { + while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { udelay (1); /* Wait until not busy */ if (++count > 200) break; @@ -435,49 +374,50 @@ static inline void smc_wait_mmu_release_complete (void) . 5. clear all interrupts . */ -static void smc_reset (void) +static void smc_reset (struct eth_device *dev) { PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);

/* This resets the registers mostly to defaults, but doesn't affect EEPROM. That seems unnecessary */ - SMC_SELECT_BANK (0); - SMC_outw (RCR_SOFTRST, RCR_REG); + SMC_SELECT_BANK (dev, 0); + SMC_outw (dev, RCR_SOFTRST, RCR_REG);

/* Setup the Configuration Register */ /* This is necessary because the CONFIG_REG is not affected */ /* by a soft reset */

- SMC_SELECT_BANK (1); + SMC_SELECT_BANK (dev, 1); #if defined(CONFIG_SMC91111_EXT_PHY) - SMC_outw (CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG); + SMC_outw (dev, CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG); #else - SMC_outw (CONFIG_DEFAULT, CONFIG_REG); + SMC_outw (dev, CONFIG_DEFAULT, CONFIG_REG); #endif

/* Release from possible power-down state */ /* Configuration register is not affected by Soft Reset */ - SMC_outw (SMC_inw (CONFIG_REG) | CONFIG_EPH_POWER_EN, CONFIG_REG); + SMC_outw (dev, SMC_inw (dev, CONFIG_REG) | CONFIG_EPH_POWER_EN, + CONFIG_REG);

- SMC_SELECT_BANK (0); + SMC_SELECT_BANK (dev, 0);

/* this should pause enough for the chip to be happy */ udelay (10);

/* Disable transmit and receive functionality */ - SMC_outw (RCR_CLEAR, RCR_REG); - SMC_outw (TCR_CLEAR, TCR_REG); + SMC_outw (dev, RCR_CLEAR, RCR_REG); + SMC_outw (dev, TCR_CLEAR, TCR_REG);

/* set the control register */ - SMC_SELECT_BANK (1); - SMC_outw (CTL_DEFAULT, CTL_REG); + SMC_SELECT_BANK (dev, 1); + SMC_outw (dev, CTL_DEFAULT, CTL_REG);

/* Reset the MMU */ - SMC_SELECT_BANK (2); - smc_wait_mmu_release_complete (); - SMC_outw (MC_RESET, MMU_CMD_REG); - while (SMC_inw (MMU_CMD_REG) & MC_BUSY) + SMC_SELECT_BANK (dev, 2); + smc_wait_mmu_release_complete (dev); + SMC_outw (dev, MC_RESET, MMU_CMD_REG); + while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) udelay (1); /* Wait until not busy */

/* Note: It doesn't seem that waiting for the MMU busy is needed here, @@ -485,7 +425,7 @@ static void smc_reset (void) of issuing another MMU command right after this */

/* Disable all interrupts */ - SMC_outb (0, IM_REG); + SMC_outb (dev, 0, IM_REG); }

/* @@ -496,13 +436,13 @@ static void smc_reset (void) . 2. Enable the receiver . 3. Enable interrupts */ -static void smc_enable() +static void smc_enable(struct eth_device *dev) { PRINTK2("%s: smc_enable\n", SMC_DEV_NAME); - SMC_SELECT_BANK( 0 ); + SMC_SELECT_BANK( dev, 0 ); /* see the header file for options in TCR/RCR DEFAULT*/ - SMC_outw( TCR_DEFAULT, TCR_REG ); - SMC_outw( RCR_DEFAULT, RCR_REG ); + SMC_outw( dev, TCR_DEFAULT, TCR_REG ); + SMC_outw( dev, RCR_DEFAULT, RCR_REG );

/* clear MII_DIS */ /* smc_write_phy_register(PHY_CNTL_REG, 0x0000); */ @@ -522,18 +462,18 @@ static void smc_enable() . the manual says that it will wake up in response to any I/O requests . in the register space. Empirical results do not show this working. */ -static void smc_shutdown() +static void smc_shutdown(struct eth_device *dev) { PRINTK2(CARDNAME ": smc_shutdown\n");

/* no more interrupts for me */ - SMC_SELECT_BANK( 2 ); - SMC_outb( 0, IM_REG ); + SMC_SELECT_BANK( dev, 2 ); + SMC_outb( dev, 0, IM_REG );

/* and tell the card to stay away from that nasty outside world */ - SMC_SELECT_BANK( 0 ); - SMC_outb( RCR_CLEAR, RCR_REG ); - SMC_outb( TCR_CLEAR, TCR_REG ); + SMC_SELECT_BANK( dev, 0 ); + SMC_outb( dev, RCR_CLEAR, RCR_REG ); + SMC_outb( dev, TCR_CLEAR, TCR_REG ); #ifdef SHARED_RESOURCES swap_to(FLASH); #endif @@ -558,10 +498,10 @@ static void smc_shutdown() . Enable the transmit interrupt, so I know if it failed . Free the kernel data if I actually sent it. */ -static int smc_send_packet (volatile void *packet, int packet_length) +static int smc_send_packet (struct eth_device *dev, volatile void *packet, + int packet_length) { byte packet_no; - unsigned long ioaddr; byte *buf; int length; int numPages; @@ -572,9 +512,9 @@ static int smc_send_packet (volatile void *packet, int packet_length) word saved_ptr;

/* save PTR and PNR registers before manipulation */ - SMC_SELECT_BANK (2); - saved_pnr = SMC_inb( PN_REG ); - saved_ptr = SMC_inw( PTR_REG ); + SMC_SELECT_BANK (dev, 2); + saved_pnr = SMC_inb( dev, PN_REG ); + saved_ptr = SMC_inw( dev, PTR_REG );

PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);

@@ -601,8 +541,8 @@ static int smc_send_packet (volatile void *packet, int packet_length) }

/* now, try to allocate the memory */ - SMC_SELECT_BANK (2); - SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG); + SMC_SELECT_BANK (dev, 2); + SMC_outw (dev, MC_ALLOC | numPages, MMU_CMD_REG);

/* FIXME: the ALLOC_INT bit never gets set * * so the following will always give a * @@ -615,10 +555,10 @@ again: try++; time_out = MEMORY_WAIT_TIME; do { - status = SMC_inb (SMC91111_INT_REG); + status = SMC_inb (dev, SMC91111_INT_REG); if (status & IM_ALLOC_INT) { /* acknowledge the interrupt */ - SMC_outb (IM_ALLOC_INT, SMC91111_INT_REG); + SMC_outb (dev, IM_ALLOC_INT, SMC91111_INT_REG); break; } } while (--time_out); @@ -635,14 +575,10 @@ again: PRINTK2 ("%s: memory allocation, try %d succeeded ...\n", SMC_DEV_NAME, try);

- /* I can send the packet now.. */ - - ioaddr = SMC_BASE_ADDRESS; - buf = (byte *) packet;

/* If I get here, I _know_ there is a packet slot waiting for me */ - packet_no = SMC_inb (AR_REG); + packet_no = SMC_inb (dev, AR_REG); if (packet_no & AR_FAILED) { /* or isn't there? BAD CHIP! */ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME); @@ -651,20 +587,20 @@ again:

/* we have a packet address, so tell the card to use it */ #ifndef CONFIG_XAENIAX - SMC_outb (packet_no, PN_REG); + SMC_outb (dev, packet_no, PN_REG); #else /* On Xaeniax board, we can't use SMC_outb here because that way * the Allocate MMU command will end up written to the command register * as well, which will lead to a problem. */ - SMC_outl (packet_no << 16, 0); + SMC_outl (dev, packet_no << 16, 0); #endif /* do not write new ptr value if Write data fifo not empty */ while ( saved_ptr & PTR_NOTEMPTY ) printf ("Write data fifo not empty!\n");

/* point to the beginning of the packet */ - SMC_outw (PTR_AUTOINC, PTR_REG); + SMC_outw (dev, PTR_AUTOINC, PTR_REG);

PRINTK3 ("%s: Trying to xmit packet of length %x\n", SMC_DEV_NAME, length); @@ -677,11 +613,11 @@ again: /* send the packet length ( +6 for status, length and ctl byte ) and the status word ( set to zeros ) */ #ifdef USE_32_BIT - SMC_outl ((length + 6) << 16, SMC91111_DATA_REG); + SMC_outl (dev, (length + 6) << 16, SMC91111_DATA_REG); #else - SMC_outw (0, SMC91111_DATA_REG); + SMC_outw (dev, 0, SMC91111_DATA_REG); /* send the packet length ( +6 for status words, length, and ctl */ - SMC_outw ((length + 6), SMC91111_DATA_REG); + SMC_outw (dev, (length + 6), SMC91111_DATA_REG); #endif

/* send the actual data @@ -692,10 +628,10 @@ again: . almost as much time as is saved? */ #ifdef USE_32_BIT - SMC_outsl (SMC91111_DATA_REG, buf, length >> 2); + SMC_outsl (dev, SMC91111_DATA_REG, buf, length >> 2); #ifndef CONFIG_XAENIAX if (length & 0x2) - SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))), + SMC_outw (dev, *((word *) (buf + (length & 0xFFFFFFFC))), SMC91111_DATA_REG); #else /* On XANEIAX, we can only use 32-bit writes, so we need to handle @@ -703,48 +639,48 @@ again: */ if ((length & 3) == 3) { u16 * ptr = (u16*) &buf[length-3]; - SMC_outl((*ptr) | ((0x2000 | buf[length-1]) << 16), + SMC_outl(dev, (*ptr) | ((0x2000 | buf[length-1]) << 16), SMC91111_DATA_REG); } else if ((length & 2) == 2) { u16 * ptr = (u16*) &buf[length-2]; - SMC_outl(*ptr, SMC91111_DATA_REG); + SMC_outl(dev, *ptr, SMC91111_DATA_REG); } else if (length & 1) { - SMC_outl((0x2000 | buf[length-1]), SMC91111_DATA_REG); + SMC_outl(dev, (0x2000 | buf[length-1]), SMC91111_DATA_REG); } else { - SMC_outl(0, SMC91111_DATA_REG); + SMC_outl(dev, 0, SMC91111_DATA_REG); } #endif #else - SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1); + SMC_outsw (dev, SMC91111_DATA_REG, buf, (length) >> 1); #endif /* USE_32_BIT */

#ifndef CONFIG_XAENIAX /* Send the last byte, if there is one. */ if ((length & 1) == 0) { - SMC_outw (0, SMC91111_DATA_REG); + SMC_outw (dev, 0, SMC91111_DATA_REG); } else { - SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG); + SMC_outw (dev, buf[length - 1] | 0x2000, SMC91111_DATA_REG); } #endif

/* and let the chipset deal with it */ - SMC_outw (MC_ENQUEUE, MMU_CMD_REG); + SMC_outw (dev, MC_ENQUEUE, MMU_CMD_REG);

/* poll for TX INT */ - /* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */ + /* if (poll4int (dev, IM_TX_INT, SMC_TX_TIMEOUT)) { */ /* poll for TX_EMPTY INT - autorelease enabled */ - if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) { + if (poll4int(dev, IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) { /* sending failed */ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);

/* release packet */ /* no need to release, MMU does that now */ #ifdef CONFIG_XAENIAX - SMC_outw (MC_FREEPKT, MMU_CMD_REG); + SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG); #endif

/* wait for MMU getting ready (low) */ - while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { + while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { udelay (10); }

@@ -754,7 +690,7 @@ again: return 0; } else { /* ack. int */ - SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG); + SMC_outb (dev, IM_TX_EMPTY_INT, SMC91111_INT_REG); /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length); @@ -762,11 +698,11 @@ again: /* release packet */ /* no need to release, MMU does that now */ #ifdef CONFIG_XAENIAX - SMC_outw (MC_FREEPKT, MMU_CMD_REG); + SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG); #endif

/* wait for MMU getting ready (low) */ - while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { + while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { udelay (10); }

@@ -777,15 +713,15 @@ again:

/* restore previously saved registers */ #ifndef CONFIG_XAENIAX - SMC_outb( saved_pnr, PN_REG ); + SMC_outb( dev, saved_pnr, PN_REG ); #else /* On Xaeniax board, we can't use SMC_outb here because that way * the Allocate MMU command will end up written to the command register * as well, which will lead to a problem. */ - SMC_outl(saved_pnr << 16, 0); + SMC_outl(dev, saved_pnr << 16, 0); #endif - SMC_outw( saved_ptr, PTR_REG ); + SMC_outw( dev, saved_ptr, PTR_REG );

return length; } @@ -813,27 +749,28 @@ void smc_destructor() * Set up everything, reset the card, etc .. * */ -static int smc_open (bd_t * bd) +static int smc_open (struct eth_device *dev) { int i, err;

PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME);

/* reset the hardware */ - smc_reset (); - smc_enable (); + smc_reset (dev); + smc_enable (dev);

/* Configure the PHY */ #ifndef CONFIG_SMC91111_EXT_PHY - smc_phy_configure (); + smc_phy_configure (dev); #endif

/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */ -/* SMC_SELECT_BANK(0); */ -/* SMC_outw(0, RPC_REG); */ - SMC_SELECT_BANK (1); +/* SMC_SELECT_BANK(dev, 0); */ +/* SMC_outw(dev, 0, RPC_REG); */ + SMC_SELECT_BANK (dev, 1);

- err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */ + /* set smc_mac_addr, and sync it with u-boot globals */ + err = smc_get_ethaddr (dev); if (err < 0) return -1; #ifdef USE_32_BIT @@ -842,11 +779,11 @@ static int smc_open (bd_t * bd)

address = smc_mac_addr[i + 1] << 8; address |= smc_mac_addr[i]; - SMC_outw (address, (ADDR0_REG + i)); + SMC_outw (dev, address, (ADDR0_REG + i)); } #else for (i = 0; i < 6; i++) - SMC_outb (smc_mac_addr[i], (ADDR0_REG + i)); + SMC_outb (dev, smc_mac_addr[i], (ADDR0_REG + i)); #endif

return 0; @@ -864,7 +801,7 @@ static int smc_open (bd_t * bd) . o otherwise, read in the packet -------------------------------------------------------------- */ -static int smc_rcv() +static int smc_rcv(struct eth_device *dev) { int packet_number; word status; @@ -876,12 +813,12 @@ static int smc_rcv() byte saved_pnr; word saved_ptr;

- SMC_SELECT_BANK(2); + SMC_SELECT_BANK(dev, 2); /* save PTR and PTR registers */ - saved_pnr = SMC_inb( PN_REG ); - saved_ptr = SMC_inw( PTR_REG ); + saved_pnr = SMC_inb( dev, PN_REG ); + saved_ptr = SMC_inw( dev, PTR_REG );

- packet_number = SMC_inw( RXFIFO_REG ); + packet_number = SMC_inw( dev, RXFIFO_REG );

if ( packet_number & RXFIFO_REMPTY ) {

@@ -890,16 +827,16 @@ static int smc_rcv()

PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME); /* start reading from the start of the packet */ - SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG ); + SMC_outw( dev, PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );

/* First two words are status and packet_length */ #ifdef USE_32_BIT - stat_len = SMC_inl(SMC91111_DATA_REG); + stat_len = SMC_inl(dev, SMC91111_DATA_REG); status = stat_len & 0xffff; packet_length = stat_len >> 16; #else - status = SMC_inw( SMC91111_DATA_REG ); - packet_length = SMC_inw( SMC91111_DATA_REG ); + status = SMC_inw( dev, SMC91111_DATA_REG ); + packet_length = SMC_inw( dev, SMC91111_DATA_REG ); #endif

packet_length &= 0x07ff; /* mask off top bits */ @@ -923,20 +860,23 @@ static int smc_rcv() to send the DWORDs or the bytes first, or some mixture. A mixture might improve already slow PIO performance */ - SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 ); + SMC_insl( dev, SMC91111_DATA_REG, NetRxPackets[0], + packet_length >> 2 ); /* read the left over bytes */ if (packet_length & 3) { int i;

- byte *tail = (byte *)(NetRxPackets[0] + (packet_length & ~3)); - dword leftover = SMC_inl(SMC91111_DATA_REG); + byte *tail = (byte *)(NetRxPackets[0] + + (packet_length & ~3)); + dword leftover = SMC_inl(dev, SMC91111_DATA_REG); for (i=0; i<(packet_length & 3); i++) *tail++ = (byte) (leftover >> (8*i)) & 0xff; } #else PRINTK3(" Reading %d words and %d byte(s) \n", (packet_length >> 1 ), packet_length & 1 ); - SMC_insw(SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 1); + SMC_insw(dev, SMC91111_DATA_REG , NetRxPackets[0], + packet_length >> 1);

#endif /* USE_32_BIT */

@@ -950,26 +890,26 @@ static int smc_rcv() is_error = 1; }

- while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY ) + while ( SMC_inw( dev, MMU_CMD_REG ) & MC_BUSY ) udelay(1); /* Wait until not busy */

/* error or good, tell the card to get rid of this packet */ - SMC_outw( MC_RELEASE, MMU_CMD_REG ); + SMC_outw( dev, MC_RELEASE, MMU_CMD_REG );

- while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY ) + while ( SMC_inw( dev, MMU_CMD_REG ) & MC_BUSY ) udelay(1); /* Wait until not busy */

/* restore saved registers */ #ifndef CONFIG_XAENIAX - SMC_outb( saved_pnr, PN_REG ); + SMC_outb( dev, saved_pnr, PN_REG ); #else /* On Xaeniax board, we can't use SMC_outb here because that way * the Allocate MMU command will end up written to the command register * as well, which will lead to a problem. */ - SMC_outl( saved_pnr << 16, 0); + SMC_outl( dev, saved_pnr << 16, 0); #endif - SMC_outw( saved_ptr, PTR_REG ); + SMC_outw( dev, saved_ptr, PTR_REG );

if (!is_error) { /* Pass the packet up to the protocol layers. */ @@ -990,12 +930,12 @@ static int smc_rcv() . an 'ifconfig ethX down' . -----------------------------------------------------*/ -static int smc_close() +static int smc_close(struct eth_device *dev) { PRINTK2("%s: smc_close\n", SMC_DEV_NAME);

/* clear everything */ - smc_shutdown(); + smc_shutdown(dev);

return 0; } @@ -1005,20 +945,20 @@ static int smc_close() /*------------------------------------------------------------ . Modify a bit in the LAN91C111 register set .-------------------------------------------------------------*/ -static word smc_modify_regbit(int bank, int ioaddr, int reg, +static word smc_modify_regbit(struct eth_device *dev, int bank, int ioaddr, int reg, unsigned int bit, int val) { word regval;

- SMC_SELECT_BANK( bank ); + SMC_SELECT_BANK( dev, bank );

- regval = SMC_inw( reg ); + regval = SMC_inw( dev, reg ); if (val) regval |= bit; else regval &= ~bit;

- SMC_outw( regval, 0 ); + SMC_outw( dev, regval, 0 ); return(regval); }

@@ -1026,10 +966,10 @@ static word smc_modify_regbit(int bank, int ioaddr, int reg, /*------------------------------------------------------------ . Retrieve a bit in the LAN91C111 register set .-------------------------------------------------------------*/ -static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit) +static int smc_get_regbit(struct eth_device *dev, int bank, int ioaddr, int reg, unsigned int bit) { - SMC_SELECT_BANK( bank ); - if ( SMC_inw( reg ) & bit) + SMC_SELECT_BANK( dev, bank ); + if ( SMC_inw( dev, reg ) & bit) return(1); else return(0); @@ -1039,20 +979,20 @@ static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit) /*------------------------------------------------------------ . Modify a LAN91C111 register (word access only) .-------------------------------------------------------------*/ -static void smc_modify_reg(int bank, int ioaddr, int reg, word val) +static void smc_modify_reg(struct eth_device *dev, int bank, int ioaddr, int reg, word val) { - SMC_SELECT_BANK( bank ); - SMC_outw( val, reg ); + SMC_SELECT_BANK( dev, bank ); + SMC_outw( dev, val, reg ); }

/*------------------------------------------------------------ . Retrieve a LAN91C111 register (word access only) .-------------------------------------------------------------*/ -static int smc_get_reg(int bank, int ioaddr, int reg) +static int smc_get_reg(struct eth_device *dev, int bank, int ioaddr, int reg) { - SMC_SELECT_BANK( bank ); - return(SMC_inw( reg )); + SMC_SELECT_BANK( dev, bank ); + return(SMC_inw( dev, reg )); }

#endif /* 0 */ @@ -1105,7 +1045,7 @@ static void smc_dump_mii_stream (byte * bits, int size) . Reads a register from the MII Management serial interface .-------------------------------------------------------------*/ #ifndef CONFIG_SMC91111_EXT_PHY -static word smc_read_phy_register (byte phyreg) +static word smc_read_phy_register (struct eth_device *dev, byte phyreg) { int oldBank; int i; @@ -1168,13 +1108,13 @@ static word smc_read_phy_register (byte phyreg) bits[clk_idx++] = 0;

/* Save the current bank */ - oldBank = SMC_inw (BANK_SELECT); + oldBank = SMC_inw (dev, BANK_SELECT);

/* Select bank 3 */ - SMC_SELECT_BANK (3); + SMC_SELECT_BANK (dev, 3);

/* Get the current MII register value */ - mii_reg = SMC_inw (MII_REG); + mii_reg = SMC_inw (dev, MII_REG);

/* Turn off all MII Interface bits */ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO); @@ -1182,23 +1122,23 @@ static word smc_read_phy_register (byte phyreg) /* Clock all 64 cycles */ for (i = 0; i < sizeof bits; ++i) { /* Clock Low - output data */ - SMC_outw (mii_reg | bits[i], MII_REG); + SMC_outw (dev, mii_reg | bits[i], MII_REG); udelay (SMC_PHY_CLOCK_DELAY);

/* Clock Hi - input data */ - SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG); + SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG); udelay (SMC_PHY_CLOCK_DELAY); - bits[i] |= SMC_inw (MII_REG) & MII_MDI; + bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI; }

/* Return to idle state */ /* Set clock to low, data to low, and output tristated */ - SMC_outw (mii_reg, MII_REG); + SMC_outw (dev, mii_reg, MII_REG); udelay (SMC_PHY_CLOCK_DELAY);

/* Restore original bank select */ - SMC_SELECT_BANK (oldBank); + SMC_SELECT_BANK (dev, oldBank);

/* Recover input data */ phydata = 0; @@ -1222,7 +1162,8 @@ static word smc_read_phy_register (byte phyreg) /*------------------------------------------------------------ . Writes a register to the MII Management serial interface .-------------------------------------------------------------*/ -static void smc_write_phy_register (byte phyreg, word phydata) +static void smc_write_phy_register (struct eth_device *dev, byte phyreg, + word phydata) { int oldBank; int i; @@ -1288,13 +1229,13 @@ static void smc_write_phy_register (byte phyreg, word phydata) bits[clk_idx++] = 0;

/* Save the current bank */ - oldBank = SMC_inw (BANK_SELECT); + oldBank = SMC_inw (dev, BANK_SELECT);

/* Select bank 3 */ - SMC_SELECT_BANK (3); + SMC_SELECT_BANK (dev, 3);

/* Get the current MII register value */ - mii_reg = SMC_inw (MII_REG); + mii_reg = SMC_inw (dev, MII_REG);

/* Turn off all MII Interface bits */ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO); @@ -1302,23 +1243,23 @@ static void smc_write_phy_register (byte phyreg, word phydata) /* Clock all cycles */ for (i = 0; i < sizeof bits; ++i) { /* Clock Low - output data */ - SMC_outw (mii_reg | bits[i], MII_REG); + SMC_outw (dev, mii_reg | bits[i], MII_REG); udelay (SMC_PHY_CLOCK_DELAY);

/* Clock Hi - input data */ - SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG); + SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG); udelay (SMC_PHY_CLOCK_DELAY); - bits[i] |= SMC_inw (MII_REG) & MII_MDI; + bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI; }

/* Return to idle state */ /* Set clock to low, data to low, and output tristated */ - SMC_outw (mii_reg, MII_REG); + SMC_outw (dev, mii_reg, MII_REG); udelay (SMC_PHY_CLOCK_DELAY);

/* Restore original bank select */ - SMC_SELECT_BANK (oldBank); + SMC_SELECT_BANK (dev, oldBank);

#if (SMC_DEBUG > 2 ) printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n", @@ -1345,7 +1286,7 @@ static void smc_wait_ms(unsigned int ms) . smc_phy_fixed() if the user has requested a certain config. .-------------------------------------------------------------*/ #ifndef CONFIG_SMC91111_EXT_PHY -static void smc_phy_configure () +static void smc_phy_configure (struct eth_device *dev) { int timeout; byte phyaddr; @@ -1361,12 +1302,12 @@ static void smc_phy_configure () phyaddr = SMC_PHY_ADDR;

/* Reset the PHY, setting all other bits to zero */ - smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_RST); + smc_write_phy_register (dev, PHY_CNTL_REG, PHY_CNTL_RST);

/* Wait for the reset to complete, or time out */ timeout = 6; /* Wait up to 3 seconds */ while (timeout--) { - if (!(smc_read_phy_register (PHY_CNTL_REG) + if (!(smc_read_phy_register (dev, PHY_CNTL_REG) & PHY_CNTL_RST)) { /* reset complete */ break; @@ -1385,14 +1326,14 @@ static void smc_phy_configure ()

/* Enable PHY Interrupts (for register 18) */ /* Interrupts listed here are disabled */ - smc_write_phy_register (PHY_MASK_REG, 0xffff); + smc_write_phy_register (dev, PHY_MASK_REG, 0xffff);

/* Configure the Receive/Phy Control register */ - SMC_SELECT_BANK (0); - SMC_outw (RPC_DEFAULT, RPC_REG); + SMC_SELECT_BANK (dev, 0); + SMC_outw (dev, RPC_DEFAULT, RPC_REG);

/* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */ - my_phy_caps = smc_read_phy_register (PHY_STAT_REG); + my_phy_caps = smc_read_phy_register (dev, PHY_STAT_REG); my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */

if (my_phy_caps & PHY_STAT_CAP_T4) @@ -1411,18 +1352,18 @@ static void smc_phy_configure () my_ad_caps |= PHY_AD_10_HDX;

/* Update our Auto-Neg Advertisement Register */ - smc_write_phy_register (PHY_AD_REG, my_ad_caps); + smc_write_phy_register (dev, PHY_AD_REG, my_ad_caps);

/* Read the register back. Without this, it appears that when */ /* auto-negotiation is restarted, sometimes it isn't ready and */ /* the link does not come up. */ - smc_read_phy_register(PHY_AD_REG); + smc_read_phy_register(dev, PHY_AD_REG);

PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps); PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);

/* Restart auto-negotiation process in order to advertise my caps */ - smc_write_phy_register (PHY_CNTL_REG, + smc_write_phy_register (dev, PHY_CNTL_REG, PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST);

/* Wait for the auto-negotiation to complete. This may take from */ @@ -1431,7 +1372,7 @@ static void smc_phy_configure () timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2; while (timeout--) {

- status = smc_read_phy_register (PHY_STAT_REG); + status = smc_read_phy_register (dev, PHY_STAT_REG); if (status & PHY_STAT_ANEG_ACK) { /* auto-negotiate complete */ break; @@ -1447,7 +1388,7 @@ static void smc_phy_configure () /* Restart auto-negotiation */ printf ("%s: PHY restarting auto-negotiation\n", SMC_DEV_NAME); - smc_write_phy_register (PHY_CNTL_REG, + smc_write_phy_register (dev, PHY_CNTL_REG, PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST | PHY_CNTL_SPEED | @@ -1467,7 +1408,7 @@ static void smc_phy_configure () }

/* Re-Configure the Receive/Phy Control register */ - SMC_outw (RPC_DEFAULT, RPC_REG); + SMC_outw (dev, RPC_DEFAULT, RPC_REG);

smc_phy_configure_exit: ;

@@ -1512,36 +1453,45 @@ static void print_packet( byte * buf, int length ) } #endif

-int eth_init(bd_t *bd) { +static int smc91111_init(struct eth_device *dev, bd_t *bd) { #ifdef SHARED_RESOURCES swap_to(ETHERNET); #endif - return (smc_open(bd)); + return (smc_open(dev)); }

-void eth_halt() { - smc_close(); +static void smc91111_halt(struct eth_device *dev) { + smc_close(dev); }

-int eth_rx() { - return smc_rcv(); +static int smc91111_rx(struct eth_device *dev) { + return smc_rcv(dev); }

-int eth_send(volatile void *packet, int length) { - return smc_send_packet(packet, length); +static int smc91111_send(struct eth_device *dev, volatile void *packet, + int length) { + return smc_send_packet(dev, packet, length); }

-int smc_get_ethaddr (bd_t * bd) +static int smc_get_ethaddr (struct eth_device *dev) { uchar v_mac[6]; + char env_parm_name[10]; /* Long enough for ethxxaddr */ + u8 dev_num = ((struct smc91111_priv *)(dev->priv))->dev_num; + + if (dev_num == 0) + strncpy(env_parm_name, "ethaddr", 7); + else + sprintf(env_parm_name, "eth%huaddr", dev_num); +

- if (!eth_getenv_enetaddr("ethaddr", v_mac)) { + if (!eth_getenv_enetaddr(env_parm_name, v_mac)) { /* get ROM mac value if any */ - if (!get_rom_mac(v_mac)) { - printf("\n*** ERROR: ethaddr is NOT set !!\n"); + if (!get_rom_mac(dev, v_mac)) { + printf("\n*** ERROR: %s is NOT set !!\n", env_parm_name); return -1; } - eth_setenv_enetaddr("ethaddr", v_mac); + eth_setenv_enetaddr(env_parm_name, v_mac); }

smc_set_mac_addr(v_mac); /* use old function to update smc default */ @@ -1549,7 +1499,7 @@ int smc_get_ethaddr (bd_t * bd) return 0; }

-int get_rom_mac (uchar *v_rom_mac) +static int get_rom_mac (struct eth_device *dev, uchar *v_rom_mac) { #ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */ char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 }; @@ -1560,13 +1510,36 @@ int get_rom_mac (uchar *v_rom_mac) int i; int valid_mac = 0;

- SMC_SELECT_BANK (1); + SMC_SELECT_BANK (dev, 1); for (i=0; i<6; i++) { - v_rom_mac[i] = SMC_inb ((ADDR0_REG + i)); + v_rom_mac[i] = SMC_inb (dev, (ADDR0_REG + i)); valid_mac |= v_rom_mac[i]; }

return (valid_mac ? 1 : 0); #endif + +} + +int smc91111_initialize(u8 dev_num, int base_addr) +{ + struct smc91111_priv *priv = malloc(sizeof(struct smc91111_priv)); + if (!priv) + return 0; + struct eth_device *dev = malloc(sizeof(struct eth_device)); + if (!dev) + return 0; + priv->dev_num = dev_num; + dev->priv = priv; + dev->iobase = base_addr; + + dev->init = smc91111_init; + dev->halt = smc91111_halt; + dev->send = smc91111_send; + dev->recv = smc91111_rx; + sprintf(dev->name, "%s-%hu", SMC_DEV_NAME, dev_num); + + eth_register(dev); + return 0; } diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h index 967addd..bb45241 100644 --- a/drivers/net/smc91111.h +++ b/drivers/net/smc91111.h @@ -58,6 +58,10 @@ typedef unsigned char byte; typedef unsigned short word; typedef unsigned long int dword;

+struct smc91111_priv{ + u8 dev_num; +}; + /* . DEBUGGING LEVELS . @@ -77,32 +81,32 @@ typedef unsigned long int dword; #ifdef CONFIG_PXA250

#ifdef CONFIG_XSENGINE -#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1)))) -#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1)))) -#define SMC_inb(p) ({ \ - unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p<<1)); \ +#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r<<1)))) +#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r<<1)))) +#define SMC_inb(a,p) ({ \ + unsigned int __p = (unsigned int)((a)->iobase + (p<<1)); \ unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \ if (__p & 2) __v >>= 8; \ else __v &= 0xff; \ __v; }) #elif defined(CONFIG_XAENIAX) -#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r)))) -#define SMC_inw(z) ({ \ - unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (z)); \ +#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) +#define SMC_inw(a,z) ({ \ + unsigned int __p = (unsigned int)((a)->iobase + (z)); \ unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \ if (__p & 3) __v >>= 16; \ else __v &= 0xffff; \ __v; }) -#define SMC_inb(p) ({ \ - unsigned int ___v = SMC_inw((p) & ~1); \ +#define SMC_inb(a,p) ({ \ + unsigned int ___v = SMC_inw((a),(p) & ~1); \ if (p & 1) ___v >>= 8; \ else ___v &= 0xff; \ ___v; }) #else -#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r)))) -#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r)))) -#define SMC_inb(p) ({ \ - unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p)); \ +#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) +#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r)))) +#define SMC_inb(a,p) ({ \ + unsigned int __p = (unsigned int)((a)->iobase + (p)); \ unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \ if (__p & 1) __v >>= 8; \ else __v &= 0xff; \ @@ -110,69 +114,69 @@ typedef unsigned long int dword; #endif

#ifdef CONFIG_XSENGINE -#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))) = d) -#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r<<1))) = d) +#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d) +#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d) #elif defined (CONFIG_XAENIAX) -#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d) -#define SMC_outw(d,p) ({ \ - dword __dwo = SMC_inl((p) & ~3); \ +#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) +#define SMC_outw(a,d,p) ({ \ + dword __dwo = SMC_inl((a),(p) & ~3); \ dword __dwn = (word)(d); \ __dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \ __dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \ - SMC_outl(__dwo, (p) & ~3); \ + SMC_outl((a), __dwo, (p) & ~3); \ }) #else -#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d) -#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d) +#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) +#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d) #endif

-#define SMC_outb(d,r) ({ word __d = (byte)(d); \ - word __w = SMC_inw((r)&~1); \ +#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \ + word __w = SMC_inw((a),(r)&~1); \ __w &= ((r)&1) ? 0x00FF : 0xFF00; \ __w |= ((r)&1) ? __d<<8 : __d; \ - SMC_outw(__w,(r)&~1); \ + SMC_outw((a),__w,(r)&~1); \ })

-#define SMC_outsl(r,b,l) ({ int __i; \ +#define SMC_outsl(a,r,b,l) ({ int __i; \ dword *__b2; \ __b2 = (dword *) b; \ for (__i = 0; __i < l; __i++) { \ - SMC_outl( *(__b2 + __i), r); \ + SMC_outl((a), *(__b2 + __i), r); \ } \ })

-#define SMC_outsw(r,b,l) ({ int __i; \ +#define SMC_outsw(a,r,b,l) ({ int __i; \ word *__b2; \ __b2 = (word *) b; \ for (__i = 0; __i < l; __i++) { \ - SMC_outw( *(__b2 + __i), r); \ + SMC_outw((a), *(__b2 + __i), r); \ } \ })

-#define SMC_insl(r,b,l) ({ int __i ; \ +#define SMC_insl(a,r,b,l) ({ int __i ; \ dword *__b2; \ __b2 = (dword *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inl(r); \ - SMC_inl(0); \ + *(__b2 + __i) = SMC_inl((a),(r)); \ + SMC_inl((a),0); \ }; \ })

-#define SMC_insw(r,b,l) ({ int __i ; \ +#define SMC_insw(a,r,b,l) ({ int __i ; \ word *__b2; \ __b2 = (word *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inw(r); \ - SMC_inw(0); \ + *(__b2 + __i) = SMC_inw((a),(r)); \ + SMC_inw((a),0); \ }; \ })

-#define SMC_insb(r,b,l) ({ int __i ; \ +#define SMC_insb(a,r,b,l) ({ int __i ; \ byte *__b2; \ __b2 = (byte *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inb(r); \ - SMC_inb(0); \ + *(__b2 + __i) = SMC_inb((a),(r)); \ + SMC_inb((a),0); \ }; \ })

@@ -187,61 +191,61 @@ typedef unsigned long int dword; ((0x00FF0000UL & _x) >> 8) | \ (_x >> 24)); })

-#define SMC_inl(r) (SMC_LEON_SWAP32((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))))) -#define SMC_inl_nosw(r) ((*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0)))) -#define SMC_inw(r) (SMC_LEON_SWAP16((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))))) -#define SMC_inw_nosw(r) ((*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0)))) -#define SMC_inb(p) ({ \ - word ___v = SMC_inw((p) & ~1); \ +#define SMC_inl(a,r) (SMC_LEON_SWAP32((*(volatile dword *)((a)->iobase+((r)<<0))))) +#define SMC_inl_nosw(a,r) ((*(volatile dword *)((a)->iobase+((r)<<0)))) +#define SMC_inw(a,r) (SMC_LEON_SWAP16((*(volatile word *)((a)->iobase+((r)<<0))))) +#define SMC_inw_nosw(a,r) ((*(volatile word *)((a)->iobase+((r)<<0)))) +#define SMC_inb(a,p) ({ \ + word ___v = SMC_inw((a),(p) & ~1); \ if ((p) & 1) ___v >>= 8; \ else ___v &= 0xff; \ ___v; })

-#define SMC_outl(d,r) (*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))=SMC_LEON_SWAP32(d)) -#define SMC_outl_nosw(d,r) (*(volatile dword *)(SMC_BASE_ADDRESS+((r)<<0))=(d)) -#define SMC_outw(d,r) (*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))=SMC_LEON_SWAP16(d)) -#define SMC_outw_nosw(d,r) (*(volatile word *)(SMC_BASE_ADDRESS+((r)<<0))=(d)) -#define SMC_outb(d,r) do{ word __d = (byte)(d); \ - word __w = SMC_inw((r)&~1); \ +#define SMC_outl(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP32(d)) +#define SMC_outl_nosw(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=(d)) +#define SMC_outw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP16(d)) +#define SMC_outw_nosw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=(d)) +#define SMC_outb(a,d,r) do{ word __d = (byte)(d); \ + word __w = SMC_inw((a),(r)&~1); \ __w &= ((r)&1) ? 0x00FF : 0xFF00; \ __w |= ((r)&1) ? __d<<8 : __d; \ - SMC_outw(__w,(r)&~1); \ + SMC_outw((a),__w,(r)&~1); \ }while(0) -#define SMC_outsl(r,b,l) do{ int __i; \ +#define SMC_outsl(a,r,b,l) do{ int __i; \ dword *__b2; \ __b2 = (dword *) b; \ for (__i = 0; __i < l; __i++) { \ - SMC_outl_nosw( *(__b2 + __i), r); \ + SMC_outl_nosw((a), *(__b2 + __i), r); \ } \ }while(0) -#define SMC_outsw(r,b,l) do{ int __i; \ +#define SMC_outsw(a,r,b,l) do{ int __i; \ word *__b2; \ __b2 = (word *) b; \ for (__i = 0; __i < l; __i++) { \ - SMC_outw_nosw( *(__b2 + __i), r); \ + SMC_outw_nosw((a), *(__b2 + __i), r); \ } \ }while(0) -#define SMC_insl(r,b,l) do{ int __i ; \ +#define SMC_insl(a,r,b,l) do{ int __i ; \ dword *__b2; \ __b2 = (dword *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inl_nosw(r); \ + *(__b2 + __i) = SMC_inl_nosw((a),(r)); \ }; \ }while(0)

-#define SMC_insw(r,b,l) do{ int __i ; \ +#define SMC_insw(a,r,b,l) do{ int __i ; \ word *__b2; \ __b2 = (word *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inw_nosw(r); \ + *(__b2 + __i) = SMC_inw_nosw((a),(r)); \ }; \ }while(0)

-#define SMC_insb(r,b,l) do{ int __i ; \ +#define SMC_insb(a,r,b,l) do{ int __i ; \ byte *__b2; \ __b2 = (byte *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inb(r); \ + *(__b2 + __i) = SMC_inb((a),(r)); \ }; \ }while(0)

@@ -253,48 +257,48 @@ typedef unsigned long int dword; */

#ifdef CONFIG_ADNPESC1 -#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1)))) +#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+((r)<<1)))) #elif CONFIG_BLACKFIN -#define SMC_inw(r) ({ word __v = (*((volatile word *)(SMC_BASE_ADDRESS+(r)))); SSYNC(); __v;}) +#define SMC_inw(a,r) ({ word __v = (*((volatile word *)((a)->iobase+(r)))); SSYNC(); __v;}) #else -#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r)))) +#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r)))) #endif -#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF) +#define SMC_inb(a,r) (((r)&1) ? SMC_inw((a),(r)&~1)>>8 : SMC_inw((a),(r)&0xFF))

#ifdef CONFIG_ADNPESC1 -#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+((r)<<1))) = d) +#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+((r)<<1))) = d) #elif CONFIG_BLACKFIN -#define SMC_outw(d,r) {(*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d); SSYNC();} +#define SMC_outw(a,d,r) {(*((volatile word *)((a)->iobase+(r))) = d); SSYNC();} #else -#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d) +#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d) #endif -#define SMC_outb(d,r) ({ word __d = (byte)(d); \ - word __w = SMC_inw((r)&~1); \ +#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \ + word __w = SMC_inw((a),(r)&~1); \ __w &= ((r)&1) ? 0x00FF : 0xFF00; \ __w |= ((r)&1) ? __d<<8 : __d; \ - SMC_outw(__w,(r)&~1); \ + SMC_outw((a),__w,(r)&~1); \ }) #if 0 -#define SMC_outsw(r,b,l) outsw(SMC_BASE_ADDRESS+(r), (b), (l)) +#define SMC_outsw(a,r,b,l) outsw((a)->iobase+(r), (b), (l)) #else -#define SMC_outsw(r,b,l) ({ int __i; \ +#define SMC_outsw(a,r,b,l) ({ int __i; \ word *__b2; \ __b2 = (word *) b; \ for (__i = 0; __i < l; __i++) { \ - SMC_outw( *(__b2 + __i), r); \ + SMC_outw((a), *(__b2 + __i), r); \ } \ }) #endif

#if 0 -#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l)) +#define SMC_insw(a,r,b,l) insw((a)->iobase+(r), (b), (l)) #else -#define SMC_insw(r,b,l) ({ int __i ; \ +#define SMC_insw(a,r,b,l) ({ int __i ; \ word *__b2; \ __b2 = (word *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inw(r); \ - SMC_inw(0); \ + *(__b2 + __i) = SMC_inw((a),(r)); \ + SMC_inw((a),0); \ }; \ }) #endif @@ -304,30 +308,30 @@ typedef unsigned long int dword; #if defined(CONFIG_SMC_USE_32_BIT)

#ifdef CONFIG_XSENGINE -#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1)))) +#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r<<1)))) #else -#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r)))) +#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) #endif

-#define SMC_insl(r,b,l) ({ int __i ; \ +#define SMC_insl(a,r,b,l) ({ int __i ; \ dword *__b2; \ __b2 = (dword *) b; \ for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inl(r); \ - SMC_inl(0); \ + *(__b2 + __i) = SMC_inl((a),(r)); \ + SMC_inl((a),0); \ }; \ })

#ifdef CONFIG_XSENGINE -#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r<<1))) = d) +#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d) #else -#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d) +#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) #endif -#define SMC_outsl(r,b,l) ({ int __i; \ +#define SMC_outsl(a,r,b,l) ({ int __i; \ dword *__b2; \ __b2 = (dword *) b; \ for (__i = 0; __i < l; __i++) { \ - SMC_outl( *(__b2 + __i), r); \ + SMC_outl((a), *(__b2 + __i), r); \ } \ })

@@ -752,25 +756,25 @@ enum {

/* select a register bank, 0 to 3 */

-#define SMC_SELECT_BANK(x) { SMC_outw( x, BANK_SELECT ); } +#define SMC_SELECT_BANK(a,x) { SMC_outw((a), (x), BANK_SELECT ); }

/* this enables an interrupt in the interrupt mask register */ -#define SMC_ENABLE_INT(x) {\ +#define SMC_ENABLE_INT(a,x) {\ unsigned char mask;\ - SMC_SELECT_BANK(2);\ - mask = SMC_inb( IM_REG );\ + SMC_SELECT_BANK((a),2);\ + mask = SMC_inb((a), IM_REG );\ mask |= (x);\ - SMC_outb( mask, IM_REG ); \ + SMC_outb( (a), mask, IM_REG ); \ }

/* this disables an interrupt from the interrupt mask register */

-#define SMC_DISABLE_INT(x) {\ +#define SMC_DISABLE_INT(a,x) {\ unsigned char mask;\ SMC_SELECT_BANK(2);\ - mask = SMC_inb( IM_REG );\ + mask = SMC_inb( (a), IM_REG );\ mask &= ~(x);\ - SMC_outb( mask, IM_REG ); \ + SMC_outb( (a), mask, IM_REG ); \ }

/*---------------------------------------------------------------------- diff --git a/examples/standalone/smc91111_eeprom.c b/examples/standalone/smc91111_eeprom.c index 39e5306..a38cc4d 100644 --- a/examples/standalone/smc91111_eeprom.c +++ b/examples/standalone/smc91111_eeprom.c @@ -42,19 +42,23 @@ #define MAC 0x2 #define UNKNOWN 0x4

-void dump_reg (void); -void dump_eeprom (void); -int write_eeprom_reg (int, int); -void copy_from_eeprom (void); -void print_MAC (void); -int read_eeprom_reg (int); -void print_macaddr (void); +void dump_reg (struct eth_device *dev); +void dump_eeprom (struct eth_device *dev); +int write_eeprom_reg (struct eth_device *dev, int value, int reg); +void copy_from_eeprom (struct eth_device *dev); +void print_MAC (struct eth_device *dev); +int read_eeprom_reg (struct eth_device *dev, int reg); +void print_macaddr (struct eth_device *dev);

int smc91111_eeprom (int argc, char *argv[]) { int c, i, j, done, line, reg, value, start, what; char input[50];

+ struct eth_device dev = { + .iobase = CONFIG_SMC91111_BASE + }; + /* Print the ABI version */ app_startup (argv); if (XF_VERSION != (int) get_version ()) { @@ -67,7 +71,7 @@ int smc91111_eeprom (int argc, char *argv[])

SMC91111_EEPROM_INIT();

- if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) { + if ((SMC_inw (&dev, BANK_SELECT) & 0xFF00) != 0x3300) { printf ("Can't find SMSC91111\n"); return (0); } @@ -211,12 +215,12 @@ int smc91111_eeprom (int argc, char *argv[]) switch (what) { case 1: printf ("Writing EEPROM register %02x with %04x\n", reg, value); - write_eeprom_reg (value, reg); + write_eeprom_reg (&dev, value, reg); break; case 2: printf ("Writing MAC register bank %i, reg %02x with %04x\n", reg >> 4, reg & 0xE, value); - SMC_SELECT_BANK (reg >> 4); - SMC_outw (value, reg & 0xE); + SMC_SELECT_BANK (&dev, reg >> 4); + SMC_outw (&dev, value, reg & 0xE); break; default: printf ("Wrong\n"); @@ -224,16 +228,16 @@ int smc91111_eeprom (int argc, char *argv[]) } break; case ('D'): - dump_eeprom (); + dump_eeprom (&dev); break; case ('M'): - dump_reg (); + dump_reg (&dev); break; case ('C'): - copy_from_eeprom (); + copy_from_eeprom (&dev); break; case ('P'): - print_macaddr (); + print_macaddr (&dev); break; default: break; @@ -244,15 +248,15 @@ int smc91111_eeprom (int argc, char *argv[]) return (0); }

-void copy_from_eeprom (void) +void copy_from_eeprom (struct eth_device *dev) { int i;

- SMC_SELECT_BANK (1); - SMC_outw ((SMC_inw (CTL_REG) & !CTL_EEPROM_SELECT) | CTL_RELOAD, - CTL_REG); + SMC_SELECT_BANK (dev, 1); + SMC_outw (dev, (SMC_inw (dev, CTL_REG) & !CTL_EEPROM_SELECT) | + CTL_RELOAD, CTL_REG); i = 100; - while ((SMC_inw (CTL_REG) & CTL_RELOAD) && --i) + while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --i) udelay (100); if (i == 0) { printf ("Timeout Refreshing EEPROM registers\n"); @@ -262,21 +266,21 @@ void copy_from_eeprom (void)

}

-void print_macaddr (void) +void print_macaddr (struct eth_device *dev) { int i, j, k, mac[6];

printf ("Current MAC Address in SMSC91111 "); - SMC_SELECT_BANK (1); + SMC_SELECT_BANK (dev, 1); for (i = 0; i < 5; i++) { - printf ("%02x:", SMC_inb (ADDR0_REG + i)); + printf ("%02x:", SMC_inb (dev, ADDR0_REG + i)); }

- printf ("%02x\n", SMC_inb (ADDR0_REG + 5)); + printf ("%02x\n", SMC_inb (dev, ADDR0_REG + 5));

i = 0; for (j = 0x20; j < 0x23; j++) { - k = read_eeprom_reg (j); + k = read_eeprom_reg (dev, j); mac[i] = k & 0xFF; i++; mac[i] = k >> 8; @@ -289,7 +293,7 @@ void print_macaddr (void) printf ("%02x\n", mac[5]);

} -void dump_eeprom (void) +void dump_eeprom (struct eth_device *dev) { int j, k;

@@ -307,7 +311,8 @@ void dump_eeprom (void) if ((k == 2) || (k == 3)) printf (" "); for (j = 0; j < 0x20; j += 4) { - printf ("%02x:%04x ", j + k, read_eeprom_reg (j + k)); + printf ("%02x:%04x ", j + k, + read_eeprom_reg (dev, j + k)); } printf ("\n"); } @@ -315,46 +320,47 @@ void dump_eeprom (void) for (j = 0x20; j < 0x40; j++) { if ((j & 0x07) == 0) printf ("\n"); - printf ("%02x:%04x ", j, read_eeprom_reg (j)); + printf ("%02x:%04x ", j, read_eeprom_reg (dev, j)); } printf ("\n");

}

-int read_eeprom_reg (int reg) +int read_eeprom_reg (struct eth_device *dev, int reg) { int timeout;

- SMC_SELECT_BANK (2); - SMC_outw (reg, PTR_REG); + SMC_SELECT_BANK (dev, 2); + SMC_outw (dev, reg, PTR_REG);

- SMC_SELECT_BANK (1); - SMC_outw (SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD, - CTL_REG); + SMC_SELECT_BANK (dev, 1); + SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT | + CTL_RELOAD, CTL_REG); timeout = 100; - while ((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout) + while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout) udelay (100); if (timeout == 0) { printf ("Timeout Reading EEPROM register %02x\n", reg); return 0; }

- return SMC_inw (GP_REG); + return SMC_inw (dev, GP_REG);

}

-int write_eeprom_reg (int value, int reg) +int write_eeprom_reg (struct eth_device *dev, int value, int reg) { int timeout;

- SMC_SELECT_BANK (2); - SMC_outw (reg, PTR_REG); + SMC_SELECT_BANK (dev, 2); + SMC_outw (dev, reg, PTR_REG);

- SMC_SELECT_BANK (1); - SMC_outw (value, GP_REG); - SMC_outw (SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG); + SMC_SELECT_BANK (dev, 1); + SMC_outw (dev, value, GP_REG); + SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT | + CTL_STORE, CTL_REG); timeout = 100; - while ((SMC_inw (CTL_REG) & CTL_STORE) && --timeout) + while ((SMC_inw (dev, CTL_REG) & CTL_STORE) && --timeout) udelay (100); if (timeout == 0) { printf ("Timeout Writing EEPROM register %02x\n", reg); @@ -365,7 +371,7 @@ int write_eeprom_reg (int value, int reg)

}

-void dump_reg (void) +void dump_reg (struct eth_device *dev) { int i, j;

@@ -377,8 +383,8 @@ void dump_reg (void) for (i = 0; i < 0xF; i += 2) { printf ("%02x ", i); for (j = 0; j < 4; j++) { - SMC_SELECT_BANK (j); - printf ("%04x ", SMC_inw (i)); + SMC_SELECT_BANK (dev, j); + printf ("%04x ", SMC_inw (dev, i)); } printf ("\n"); } diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h index 8941e4d..61d8e20 100644 --- a/include/configs/EP1C20.h +++ b/include/configs/EP1C20.h @@ -151,7 +151,8 @@ * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ #define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */

diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h index 53bd0d8..41e64e6 100644 --- a/include/configs/EP1S10.h +++ b/include/configs/EP1S10.h @@ -145,7 +145,8 @@ * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ #define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */

diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h index 9e9a8a4..5b332e4 100644 --- a/include/configs/EP1S40.h +++ b/include/configs/EP1S40.h @@ -145,7 +145,8 @@ * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ #define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */

diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index 3853574..6083892 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -50,7 +50,8 @@ #undef CONFIG_SHOW_BOOT_PROGRESS

/* SMC9111 */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0xB0000000)

/* MEMORY */ diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 522349f..cf6f7a9 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -151,7 +151,8 @@ * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ #define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */

diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index f896cb0..8f23f1d 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -65,7 +65,8 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20310300 #define SMC91111_EEPROM_INIT() \ do { \ diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 4be2a5c..4693f00 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -60,7 +60,8 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20300300 #define SMC91111_EEPROM_INIT() \ do { \ diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 535687f..c4d899d 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -60,7 +60,8 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20310300 #define CONFIG_HOSTNAME bf538f-ezkit /* Uncomment next line to use fixed MAC address */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 4779a97..a1fa80b 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -60,7 +60,8 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x2C010300 #define CONFIG_SMC_USE_32_BIT 1 #define CONFIG_HOSTNAME bf561-ezkit diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 887f3fb..6c9b3e0 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -30,7 +30,8 @@ /* * Board settings */ -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20300300

/* FLASH/ETHERNET uses the same address range diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index b924758..477b94a 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -53,7 +53,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x04000300 #define CONFIG_SMC_USE_32_BIT

diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index ea548e9..06eb288 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -60,7 +60,8 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20200300 #define CONFIG_HOSTNAME cm-bf533 /* Uncomment next line to use fixed MAC address */ diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 1153f11..dd747c8 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -61,7 +61,8 @@ */ #define ADI_CMDS_NETWORK 1 /* The next 2 lines are for use with DEV-BF5xx */ -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x28000300 /* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */ /* #define CONFIG_DRIVER_SMC911X 1 */ diff --git a/include/configs/cradle.h b/include/configs/cradle.h index b150c22..200b61e 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -49,7 +49,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x10000300 #define CONFIG_SMC91111_EXT_PHY #define CONFIG_SMC_USE_32_BIT diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index b6cfc67..e48e20f 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -54,7 +54,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x20000300

diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index bbe635b..d188439 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -292,7 +292,8 @@ /* * Ethernet configuration uses on board SMC91C111 */ -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */ #define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index 7b0a08f..3a568ff 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -267,7 +267,8 @@ #ifndef USE_GRETH

/* USE SMC91C111 MAC */ -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */ #define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ diff --git a/include/configs/innokom.h b/include/configs/innokom.h index ed03ad3..9cb0d42 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -157,7 +157,8 @@ /* * SMSC91C111 Network Card */ -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */ #undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index e38d569..caafc93 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -53,7 +53,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC_USE_32_BIT #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY diff --git a/include/configs/logodl.h b/include/configs/logodl.h index 5b903f0..0535ee1 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -133,7 +133,8 @@ * SMSC91C111 Network Card */ #if 0 -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x10000000 /* chip select 4 */ #undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h index 6145c37..5f57c3a 100644 --- a/include/configs/lpd7a400-10.h +++ b/include/configs/lpd7a400-10.h @@ -72,7 +72,8 @@ * Default IO base of chip is 0x300, Card Engine has this address lines * (LAN chip) tied to Vcc, so we just care about the chip select */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0x70000000) #undef CONFIG_SMC_USE_32_BIT #define CONFIG_SMC_USE_IOFUNCS diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h index ce23f3d..9074e28 100644 --- a/include/configs/lpd7a404-10.h +++ b/include/configs/lpd7a404-10.h @@ -72,7 +72,8 @@ * Default IO base of chip is 0x300, Card Engine has this address lines * (LAN chip) tied to Vcc, so we just care about the chip select */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0x70000000) #undef CONFIG_SMC_USE_32_BIT #define CONFIG_SMC_USE_IOFUNCS diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 6755af3..0251428 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -48,7 +48,8 @@ #undef CONFIG_SHOW_BOOT_PROGRESS

/* SMC9111 */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0xB8000000)

/* MEMORY */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h index f0b4207..7bddf24 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -93,7 +93,8 @@ #define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ #define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */

-#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x04000300

#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 3e2e09f..bf0c7bc 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -116,7 +116,8 @@ #define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) #define __mem_isa(a) ((a) + PCI_MEMORY_VADDR)

-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111*/ +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 /* Using SMC91c111*/ #define CONFIG_SMC91111_BASE 0x34000300 #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 2cae8ca..6c1defc 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -87,7 +87,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300) #define CONFIG_SMC_USE_32_BIT 1 /* #define CONFIG_SMC_USE_IOFUNCS */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index a9b70cc..4273b84 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -82,7 +82,8 @@ * Hardware drivers */

-#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC_USE_32_BIT #define CONFIG_SMC91111_BASE 0x10010000 #undef CONFIG_SMC91111_EXT_PHY diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index c9c3132..0dde65d 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -94,7 +94,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x08000300

#define CONFIG_HARD_I2C diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 83883f6..1329f0f 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -196,7 +196,8 @@ /* * SMSC91C111 Network Card */ -#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE 0x10000300 /* chip select 3 */ #define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ #undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ diff --git a/include/configs/xm250.h b/include/configs/xm250.h index f18701a..cd56ce7 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -50,7 +50,8 @@ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x04000300 #undef CONFIG_SMC91111_EXT_PHY #define CONFIG_SMC_USE_32_BIT diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 2697cca..f68461b 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -94,7 +94,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x04000300 #define CONFIG_SMC_USE_32_BIT 1

diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 86b6ea1..36c341e 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -62,7 +62,7 @@

#undef TURN_ON_ETHERNET #ifdef TURN_ON_ETHERNET -# define CONFIG_DRIVER_SMC91111 1 +# define CONFIG_SMC91111 1 # define CONFIG_SMC91111_BASE 0x14000300 # define CONFIG_SMC91111_EXT_PHY # define CONFIG_SMC_USE_32_BIT diff --git a/include/netdev.h b/include/netdev.h index 3e66586..4636b57 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -73,6 +73,7 @@ int rtl8169_initialize(bd_t *bis); int scc_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc911x_initialize(u8 dev_num, int base_addr); +int smc91111_initialize(u8 dev_num, int base_addr); int tsi108_eth_initialize(bd_t *bis); int uec_initialize(int index); int uec_standard_init(bd_t *bis);