I am against using "f1c100" in commit message, because there is a chip called F1C100 that is part of legacy sun3i instead of suniv.
Using "suniv" or "f1c100s" is better.
在 2022-10-12星期三的 17:34 +0100，Andre Przywara写道：
So far we stated the lack of a lowlevel() init function for the F1C100s board by defining the respective SKIP_* symbol in the board's defconfig. However we don't expect any *board* to employ such low level code, so expect this to be never used for the ARMv5 Allwinner SoCs.
Select the appropriate symbols in the Kconfig, so that we can remove them from the defconfig, and avoid putting them in future defconfigs for other boards.
Signed-off-by: Andre Przywara andre.przywara@arm.com
arch/arm/mach-sunxi/Kconfig | 2 ++ configs/licheepi_nano_defconfig | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach- sunxi/Kconfig index 9aa66deb9fd..fc5d8bb3c19 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -185,6 +185,8 @@ config MACH_SUNIV select CPU_ARM926EJS select SUNXI_GEN_SUN6I select SUPPORT_SPL + select SKIP_LOWLEVEL_INIT_ONLY + select SPL_SKIP_LOWLEVEL_INIT_ONLY config MACH_SUN4I bool "sun4i (Allwinner A10)" diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig index 14e6bcda927..09f1a19cdbe 100644 --- a/configs/licheepi_nano_defconfig +++ b/configs/licheepi_nano_defconfig @@ -1,6 +1,4 @@ CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y -CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano"