This patch fixes three typos.
The first is a repetition of CONFIG_CMD_BSP.
The second makes the #endif comment match its #if.
The third is a spelling error.
Signed-off-by: Adrian Filipi adrian.filipi@eurotech.com
Adrian -- Linux Software Engineer | EuroTech, Inc. | www.eurotech-inc.com
diff -u -ru u-boot-1.3.3-rc2.orig/README u-boot-1.3.3-rc2/README --- u-boot-1.3.3-rc2.orig/README 2008-04-29 17:41:06.000000000 -0400 +++ u-boot-1.3.3-rc2/README 2008-05-02 08:29:20.000000000 -0400 @@ -623,7 +623,6 @@ CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_USB * USB support CONFIG_CMD_VFD * VFD support (TRAB) - CONFIG_CMD_BSP * Board SPecific functions CONFIG_CMD_CDP * Cisco Discover Protocol support CONFIG_CMD_FSL * Microblaze FSL support
Only in u-boot-1.3.3-rc2: README.orig diff -u -ru u-boot-1.3.3-rc2.orig/cpu/arm920t/s3c24x0/usb.c u-boot-1.3.3-rc2/cpu/arm920t/s3c24x0/usb.c --- u-boot-1.3.3-rc2.orig/cpu/arm920t/s3c24x0/usb.c 2008-04-29 17:41:06.000000000 -0400 +++ u-boot-1.3.3-rc2/cpu/arm920t/s3c24x0/usb.c 2008-05-02 08:29:20.000000000 -0400 @@ -69,4 +69,4 @@ }
# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */ -#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ +#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) */ diff -u -ru u-boot-1.3.3-rc2.orig/doc/README.nand-boot-ppc440 u-boot-1.3.3-rc2/doc/README.nand-boot-ppc440 --- u-boot-1.3.3-rc2.orig/doc/README.nand-boot-ppc440 2008-04-29 17:41:06.000000000 -0400 +++ u-boot-1.3.3-rc2/doc/README.nand-boot-ppc440 2008-05-02 08:29:20.000000000 -0400 @@ -9,7 +9,7 @@ completely without NOR FLASH. This can be done by using the NAND boot feature of the 440 NAND flash controller (NDFC).
-Here a short desciption of the different boot stages: +Here a short description of the different boot stages:
a) IPL (Initial Program Loader, integrated inside CPU) ------------------------------------------------------