Hi,
On 27-07-15 14:31, Paul Kocialkowski wrote:
Hi,
Le mercredi 22 juillet 2015 à 11:31 +0200, Hans de Goede a écrit :
Hi,
On 22-07-15 10:45, Paul Kocialkowski wrote:
This makes sunxi boards use the USB_EHCI_HCD Kconfig option instead of defining USB_EHCI as a config define. This allows for more flexibility in enabling the controller and handling other Kconfig that may depend on USB EHCI.
Signed-off-by: Paul Kocialkowski contact@paulk.fr
This is already done by this commit:
https://github.com/jwrdegoede/u-boot-sunxi/commit/a38b760f8805dfa7d9a0d60fa0...
My sunxi-wip tree has a whole bunch of patches to convert the musb-host code to DM_USB so that the musb code can be built in in host mode together with the ehci / uhci host drivers, this is useful on boards where the musb is used in host only mode such as the Mele A1000G quad where the musb is hooked up to a usb2sata chip for the sata slot of the device.
The dm-usb bits of these series are queued up in: http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/next
And I'm waiting for those to go upstream before submitting a pull-req with the sunxi bits of this, which is also why:
https://github.com/jwrdegoede/u-boot-sunxi/commit/a38b760f8805dfa7d9a0d60fa0...
Has not been merged yet as it sits on top of all this...
Looks like everything was merged now. Can you confirm all the bits are in the main u-boot repository? if so, I'll just adapt my series as discussed on top of that.
Correct, everything is merged now, basing on top of master should be fine.
Regards,
Hans